Abstract
Triphenylphosphine sulfide ligand (L1) exhibited excellent catalytic performance in the copper-catalyzed azide–alkyne cycloaddition (CuAAC) of ethynyldiphenylphosphine oxide (1) and azides (2), affording functionalized 4-phosphinyl-1,2,3-triazoles (3) in good yields. L1 showed superior performance to triphenylphosphine oxide, triphenylphosphine, and the sulfide ligands examined, possibly owing to suitable coordination of its P=S moiety to Cu. And, the products could be transformed to 4-phosphanyl-1,2,3-triazoles (4) and 1-benzyl-substituted 1,2,3-triazoles (5) by reduction and dephosphinylation, respectively. This [Cu]/L1-catalyzed protocol, the first example of the application of triphenylphosphine sulfide as a ligand in CuAAC, featured the following advantages: low catalyst loading, relatively short reaction time, broad functional group tolerance, high yields, and facile scalability.
Keywords: triphenylphosphine sulfide; ligand; 4-phosphinyl-1,2,3-triazole; 4-phosphanyl-1,2,3-triazole; CuAAC
1. Introduction
1,4-substituted 1,2,3-triazoles, important heterocyclic compounds, are not only important starting materials and intermediates in organic synthesis [1], but also have potential applications in the fields of photoswitch [2], electroluminescent devices [3], liquid crystal [4], biochemistry [5] and drugs [6,7]. The organophosphorus compounds, which could be transformed into various functional molecules through the Horner–Wadsworth–Emmons (HWE) reaction [8], cross-coupling [9], cyclization [10], Wittig reaction [11] and so on, are frequently employed as ligands [12,13,14] or organocatalysts [15,16] in several organic transformations. In addition, organophosphorus materials have extensive applications in the fields of organic electronics [17] and pesticides [18]. Phosphorus-involved 1,2,3-triazoles, possessing the characteristics of 1,2,3-triazoles and organophosphorus compounds, exhibit diverse applications. For example, 4-phosphinyl-1,2,3-triazole (A) with a peptide moiety could be used in protein phosphorylation [19], bis(benzothieno)-functionalized 4-phosphinyl-1,2,3-triazole (B) is a self-assembled luminescent soft material [20], tris(1,2,3-triazolyl)phosphineoxide (C) is a tripodal ligand for Re [21], 4-phosphanyl-1,2,3-triazole (D) could be coordinated with Cu to form a luminescent material [22], and 4-phosphanyl-1,2,3-triazole (E) is an efficient ligand for Suzuki–Miyaura coupling (Figure 1) [23].
Figure 1.

The usefulness of phosphorus-involved 1,2,3-triazoles (A–E).
Copper-catalyzed azide–alkyne cycloaddition (CuAAC), which displayed low activation energy and ensured excellent regioselectivity especially for electrophilically activated alkynes [24,25], was frequently utilized to synthesize phosphorus-involved 1,2,3-triazoles. As shown in Scheme 1a, CuSO4 catalyzed CuAAC of ethynyldiphenylphosphine oxide and (azidomethyl)benzene afforded the desired 4-phosphinyl-1,2,3-triazole in 78% yield [26], CuBr-promoted CuAAC gave 4-phosphinyl-1,2,3-triazoles in reasonable yields at −20 °C using modified 2,6-bis[(4S)-phenyl-2-oxazolin-2-yl]pyridine (PYBOX) as a ligand (L0) [27], and CuBr-accelerated CuAAC of ethynyldiphenylphosphine oxide and (azidomethyl)benzene yielded a mixture of bis(triazole), ethyl-substituted triazole and mono(triazole) [28]. Although these approaches produced 4-phosphinyl-1,2,3-triazoles successfully, several drawbacks existed, including limited substrate scope, high catalyst loading and long reaction time. Additionally, three-component domino reactions of aldehydes, the Bestmann–Ohira reagent and amines formed the corresponding 4-phosphinyl-1,2,3-triazoles in moderate yields in the presence of K2CO3, but just aryl aldehydes and aryl amines were employed [29]. Therefore, a new and efficient synthetic protocol for 4-phosphinyl-1,2,3-triazoles is highly desirable. Herein, triphenylphosphine sulfide was found to be a readily available, inexpensive and an efficient ligand (L1) for the CuAAC reaction of ethynyldiphenylphosphine oxide with azides. Using CuI/L1 as a catalytic system, the reaction between ethynyldiphenylphosphine oxide and substituted benzyl azides proceeded smoothly to generate the 4-phosphinyl-1,2,3-triazoles in good yields. For the CuAAC reaction of alkyl or aryl azides, the dual-copper catalytic system CuI//Cu(OAc)2-H2O/L1 was required to achieve high yields (Scheme 1b).
Scheme 1.

Synthesis of 4-phosphinyl-1,2,3-triazoles (a,b) [26,27,28,29].
2. Results and Discussion
Initially, the performance of different ligands in the CuAAC reaction of ethynyldiphenylphosphine oxide (1) and benzyl azide (2a) was examined (Table 1). Among triphenylphosphine sulfide (L1), triethylphosphine sulfide (L2) and O,O,O-triethylthiophosphate (L3), L1 displayed the highest catalytic activity, affording the desired 3a in 66% yield (entry 1 vs. 2 and 3). L1 also showed better performance than triphenylphosphine oxide (L4) and triphenylphosphine (L5) (entry 1 vs. 4 and 5). The sulfide ligands (L6–L9) generated 3a in 18–30% yields (entries 6–9). These results suggested that coordination of the P=S moiety to Cu may play an important role in the catalytic system. When other copper catalysts (CuBr, CuCl, Cu(OAc)2-H2O, CuSO4, CuCl2) were applied, the yields were between 41% and 54%, which were lower than that of CuI (entries 10–14 vs. 1). The solvent also had a critical effect on the reaction, and 1,4-dioxane was the best solvent for this reaction among toluene, DMF, DMSO and THF (entry 1 vs. entries 15–18). The catalyst loading, temperature (detected in the oil bath) and reaction time also had an impact on the yield. After the reaction had been carefully investigated, the following optimized reaction conditions were obtained: a mixture of 1 (1.0 mmol), 2a (1.3 mmol), CuI (0.02 mmol) and L1 (0.02 mmol) in 1,4-dioxane (5 mL) at 120 °C under a nitrogen atmosphere for 15 h, giving 3a in 90% yield (0.3234 g) (entry 19). In a gram-scale synthesis, 2.2621g (10.0 mmol) of 1 gave 3.1624 g (8.8 mmol) of 3a in 88% yield (entry 19, Figure S1, Supplementary Materials).
Table 1.
Optimization of the reaction conditions of CuAAC between 1 and 2a a.
| ||||||||
|---|---|---|---|---|---|---|---|---|
| Entry | Cat. | x | L | y | Solvent | Temp. (°C) | Time (h) | Yield (%) |
| 1 | CuI | 1 | L1 | 1 | 1,4-dioxane | 120 | 12 | 66 |
| 2 | CuI | 1 | L2 | 1 | 1,4-dioxane | 120 | 12 | 45 |
| 3 | CuI | 1 | L3 | 1 | 1,4-dioxane | 120 | 12 | 40 |
| 4 | CuI | 1 | L4 | 1 | 1,4-dioxane | 120 | 12 | 31 |
| 5 | CuI | 1 | L5 | 1 | 1,4-dioxane | 120 | 12 | 23 |
| 6 | CuI | 1 | L6 | 1 | 1,4-dioxane | 120 | 12 | 25 |
| 7 | CuI | 1 | L7 | 1 | 1,4-dioxane | 120 | 12 | 20 |
| 8 | CuI | 1 | L8 | 1 | 1,4-dioxane | 120 | 12 | 18 |
| 9 | CuI | 1 | L9 | 1 | 1,4-dioxane | 120 | 12 | 30 |
| 10 | CuBr | 1 | L1 | 1 | 1,4-dioxane | 120 | 12 | 54 |
| 11 | CuCl | 1 | L1 | 1 | 1,4-dioxane | 120 | 12 | 52 |
| 12 | Cu(OAc)2-H2O | 1 | L1 | 1 | 1,4-dioxane | 120 | 12 | 48 |
| 13 | CuSO4 | 1 | L1 | 1 | 1,4-dioxane | 120 | 12 | 46 |
| 14 | CuCl2 | 1 | L1 | 1 | 1,4-dioxane | 120 | 12 | 41 |
| 15 | CuI | 1 | L1 | 1 | toluene | 120 | 12 | 48 |
| 16 | CuI | 1 | L1 | 1 | DMF | 120 | 12 | 57 |
| 17 | CuI | 1 | L1 | 1 | DMSO | 120 | 12 | 55 |
| 18 | CuI | 1 | L1 | 1 | THF | 70 | 12 | 39 |
| 19 | CuI | 2 | L1 | 2 | 1,4-dioxane | 120 | 15 | 90 (88 b) |
a 1 (1.0 mmol), 2a (1.3 mmol), solvent (5 mL), isolated yield. b 1 (10.0 mmol), 2a (13.0 mmol), solvent (50 mL), isolated yield.
We then extended the scope of benzyl azides. As shown in Scheme 2, all of the para-, meta-, and ortho-methyl-substituted benzyl azides were suitable for this procedure and afforded the desired 4-phosphinyl-1,2,3-triazoles (3b–3d) in good-to-excellent yields. In the case of benzyl azides with either electron-donating (p-tBu, m-OMe) groups, products (3e, 3f) were efficiently produced in 83% and 97% yields, respectively. When benzyl azides with electron-withdrawing (p-F, m-Cl, o-Cl, p-Cl, p-Br, m-Br, o-Br, m-I, p-CF3 and o-CN) groups were subjected to this CuAAC reaction with 1, the desired 3g–3o were obtained in 72%–91% yields.
Scheme 2.

CuI/L1 catalyzed CuAAC reaction of 1 with benzyl azides.
The benzyl, alkyl, and phenyl azides demonstrated notably different reactivities and turnover numbers (TONs) in CuAAC reactions [30,31,32]. When hexyl azide (2p) was subjected to the CuAAC with 1 at 120 °C in the presence of CuI and L1 in 1,4-dioxane, the desired product 3p was afforded in 36% yield (Table 2, entry 1). Increasing the catalyst loading to 5 mol% improved the yield of 3p to 55% (entry 2). When the CuAAC between 1 and 2p was conducted using a dual-copper catalytic system (CuI//Cu(OAc)2-H2O/L1) with the catalyst loading of 2 mol%, the desired cycloaddition was remarkably improved, producing 3p in 89% yield in 15 h (entry 3). Prolonging the reaction time slightly increased the yield of 3p (entries 3–5). After detailed optimization of the reaction conditions, the optimum conditions were determined as follows: a mixture of 1 (1.0 mmol), 2p (1.3 mmol), CuI (0.02 mmol), Cu(OAc)2-H2O (0.02 mmol) and L1 (0.02 mmol) in 1,4-dioxane (5 mL) at 120 °C under a nitrogen atmosphere for 18 h, giving 3p in 92% yield (0.3251 g) (entry 4).
Table 2.
Optimization of the reaction conditions of CuAAC between 1 and 2p a.
| |||||
|---|---|---|---|---|---|
| Entry | Cat. | x | y | Time (h) | Yield (%) |
| 1 | CuI | 2 | 2 | 15 | 36 |
| 2 | CuI | 5 | 5 | 15 | 55 |
| 3 | CuI/Cu(OAc)2-H2O | 2 | 2 | 15 | 89 |
| 4 | CuI/Cu(OAc)2-H2O | 2 | 2 | 18 | 92 |
| 5 | CuI/Cu(OAc)2-H2O | 2 | 2 | 19 | 90 |
| 6 | CuI/Cu(OAc)2-H2O | 3 | 3 | 18 | 91 |
a 1 (1.0 mmol), 2p (1.3 mmol), 1,4-dioxane (5 mL), isolated yield.
Under the above optimum conditions, a variety of alkyl and phenyl azides underwent this cycloaddition smoothly to generate functionalized 4-phosphinyl-1,2,3-triazoles in reasonable yields (Scheme 3). Primary and secondary alkyl azides were both well tolerated, affording the desired products 3q–3v in 75–95% yields. In the case of alkyl azides with carbonyl, ester, chloro or bromo groups, products 3w–3ab were efficiently produced in good-to-excellent yields. Notably, the diazide was applicable, forming the corresponding 3ac with an unreacted azido in 80% yield. The protocol was also compatible with diverse phenyl azides with either electron-donating (p-Me, m-Me, o-Me) or electron-withdrawing (m-I, p-I) groups, generating the desired products 3ad–3ah in 58–81% yields.
Scheme 3.

CuI//Cu(OAc)2-H2O/L1-catalyzed CuAAC reaction of 1 with alkyl and phenyl azides.
A plausible mechanism for the above CuI/Cu(OAc)2-H2O/L1 catalytic system was deduced. Initially, active L1-Cu(OAc)2 (0) was formed by coordination of Cu(OAc)2 to ligand (L1). Coordination of 0 with ethynyldiphenylphosphine oxide (1) generated the intermediate A. Abstraction of a H atom from ethyne by OAc in A produced B, which was then transformed to the di-copper intermediate C through incorporating with CuI and 2p and the elimination of HOAc. The six-membered metallacycle D could be obtained by the intramolecular cyclization of C. Forming of C2–N2 bond in D produced the five-membered cycle intermediate E with the elimination of CuI. Intermediate F was then yielded via coordination of HOAc with E. The H transformation in F afforded the desired 3p and regenerated the active 0 (Scheme 4). The suitable coordination of P=S moiety in L1 with copper was critical to enhance the activity of copper, possibly due to the formation of the more-stable six-membered metallacycle D, which then lowered the activation energy of this CuAAC reaction. The regioselective formation of 4-phosphinyl-1,2,3-triazole (3p) might be due to the facile coordination of 2p and ethyne moiety in B with CuI.
Scheme 4.

The proposed mechanism.
Two chemical conversions of cycloaddition products (3) were conducted to demonstrate their chemical usability (Scheme 5). The 4-phosphinyl-1,2,3-triazoles prepared above could be transformed into 4-phosphanyl-1,2,3-triazoles by reduction with PhSiH3 [33]. In this transformation, both of the benzyl- and alkyl-substituted 4-phosphinyl-1,2,3-triazoles were tolerated, resulting in the formation of the corresponding 4-phosphanyl-1,2,3-triazoles (4a–4e) in good yields. The 4-phosphinyl-1,2,3-triazoles (3a, 3i and 3j) were transformed to the corresponding 1-benzyl-substituted 1,2,3-triazoles (5a–5c) in excellent yields via the MeMgBr-promoted dephosphinylation.
Scheme 5.

Transformation of products (a,b).
3. Materials and Methods
Unless otherwise noted, all reactions were carried out under a N2 atmosphere. All reagents were commercially available and utilized without any further purification. Glass apparatus was dried in an oven and heated under vacuum before use. Analytical thin layer chromatography (TLC) was performed on Haiyang TLC silica gel GF254 (0.25 mm, from Qingdao Hailang Silica Gel Desiccant Co., Ltd., Qingdao, China) plates. Column chromatography was implemented on silica gel (300–400 mesh) with a suitable eluent solvent. 1H, 13C, 31P and 19F NMR spectra were recorded on a Bruker-400 MHz spectrometer from Bruker Switzerland AG, Fällanden, Switzerland (1H: 400 MHz, 13C: 101 MHz, 31P: 121 MHz, and 19F: 376 MHz) using the solvent resonances as internal standards (1H NMR: CDCl3, δ 7.26 ppm; 13C NMR: CDCl3, δ 77.00 ppm; 31P NMR: CDCl3; 19F NMR: CDCl3). Chemical shifts are reported in ppm (δ) relative to internal tetramethylsilane (TMS). Data are reported as follows: chemical shift, multiplicity (s = singlet, d = doublet, t = triplet, q = quartet, m = multiplet); coupling constants (J) are reported in hertz. Melting points were measured using a melting point meter RY-1G. Crystal Data were acquired at 296 K on a Rigaku Oxford Diffraction Supernova Dual Source, Cu at zero equipped with an Atlas S2 CCD using Cu Kα radiation. HRMS data were acquired using a Waters Xevo G2-XS QT of mass spectrometer with electrospray ionization (ESI). Ethynyldiphenylphosphine oxide (1) and benzyl, alkyl, and phenyl azides were prepared according to the reported methods [26].
General Procedure for Synthesis of 4-phosphinyl-1,2,3-triazoles (3a–3o). A Schlenk tube of 25 mL equipped with a magnetic stir bar was charged with 1 (0.2262 g, 1.0 mmol), azide 2 (1.3 mmol), CuI (0.0038 g, 0.02 mmol), L1 (0.0059 g, 0.02 mmol) and 1,4-dioxane (5 mL) under nitrogen. The mixture was stirred at 120 °C for 15 h. After quenching with aqueous NH4Cl, the aqueous layer was extracted with AcOEt three times. The combined organic layers were washed with brine and dried over MgSO4. After filtration, the solvent was removed under reduced pressure. The crude product was subjected to column chromatography on silica gel (PE/AcOEt, 1:1) to afford 4-phosphinyl-1,2,3-triazoles (3a–3o) in pure form.
(1-benzyl-1H-1,2,3-triazol-4-yl)diphenylphosphine oxide (3a): prepared from 1 (0.2262 g, 1.0 mmol) and azide 2a (0.1731, 1.3 mmol) as a white solid in 90% yield (0.3234 g). Melting point (M.P.): 158–160 °C; 1H NMR (400 MHz, CDCl3) δ 8.09 (s, CH, 1H), 7.91–7.84 (m, 4H), 7.56–7.49 (m, 2H), 7.48–7.42 (m, 4H), 7.41–7.35 (m, 3H), 7.33–7.27 (m, 2H), 5.57 (s, CH2, 2H). 13C NMR (101 MHz, CDCl3) δ 133.39, 132.33 (d, J = 110.8 Hz), 132.08 (d, J = 2.4 Hz), 131.41 (d, J = 10.4 Hz), 130.87, 130.64, 129.25, 129.10, 128.52, 128.40, 54.33 (benzyl C). 31P NMR (162 MHz, CDCl3) δ 16.93. HRMS-ESI (m/z) [M+H+] Calcd for C21H19N3OP 360.1266; found, 360.1268.
Gram-scale synthesis of 3a: A Schlenk tube of 250 mL equipped with a magnetic stir bar was charged with 1 (2.2621 g, 10.0 mmol), azide 2a (1.7310 g, 13.0 mmol), CuI (0.0381 g, 0.2 mmol), L1 (0.0589 g, 0.2 mmol) and 1,4-dioxane (50 mL) under nitrogen, after stirring at 120 °C for 15 h. After the usual workup with EtOAc and NH4Claq, the combined organic layer was washed with brine, and dried over MgSO4. After filtration, the solvents were evaporated. The crude product was subjected to column chromatography on silica gel (PE/AcOEt, 1:1) to afford 3a as a white solid in 88% yield (3.1624 g).
General Procedure for the Synthesis of 4-phosphinyl-1,2,3-triazoles (3p–3ah). A Schlenk tube of 25 mL equipped with a magnetic stir bar was charged with 1 (0.2262 g, 1.0 mmol), azide 2 (1.3 mmol), CuI (0.0038 g, 0.02 mmol), Cu(OAc)2-H2O (0.02 mmol), L1 (0.0059 g, 0.02 mmol) and 1,4-dioxane (5 mL) under nitrogen. The mixture was stirred at 120 °C for 18 h. After quenching with aqueous NH4Cl, the aqueous layer was extracted with AcOEt three times. The combined organic layers were washed with brine and dried over MgSO4. After filtration, the solvent was removed under reduced pressure. The crude product was subjected to column chromatography on silica gel (PE/AcOEt, 1:1) to afford 4-phosphinyl-1,2,3-triazoles (3p–3ah) in pure form.
(1-hexyl-1H-1,2,3-triazol-4-yl)diphenylphosphine oxide (3p): prepared from 1 (0.2262 g, 1.0 mmol) and azide 2p (0.1653 g, 1.3 mmol) as a white solid in 92% yield (0.3251 g). Melting point (M.P.): 76–79 °C; 1H NMR (400 MHz, CDCl3) δ 8.18 (s, 1H), 7.88–7.83 (m, 4H), 7.51–7.47 (m, 2H), 7.45–7.40 (m, 4H), 4.38 (t, J = 7.3 Hz, 2H), 1.92–1.85 (m, 2H), 1.31–1.23 (m, 6H), 0.83 (t, J = 7.6 Hz, 2H). 13C NMR (101 MHz, CDCl3) δ 141.40 (d, J = 134.3 Hz), 132.27 (d, J = 111.1 Hz), 131.92, 131.26 (d, J = 12.1 Hz), 130.60 (d, J = 24.2 Hz), 128.32 (d, J = 12.1 Hz), 50.34, 30.86, 29.89, 25.88, 22.15, 13.72. 31P NMR (162 MHz, CDCl3) δ 16.79. HRMS-ESI (m/z) [M+H+] Calcd for C20H25N3OP 354.1735; found, 354.1738.
General Procedure for the Synthesis of 4-phosphanyl-1,2,3-triazoles (4a–4e). A Schlenk tube of 25 mL equipped with a magnetic stir bar was charged with 3 (0.5 mmol), PhSiH3 (0.2164 g, 2.0 mmol), CH3COOH (0.3003 g, 5.0 mmol), and toluene (5 mL) under nitrogen. The mixture was stirred under refluxing for 15 h. After quenching with aqueous NH4Cl, the aqueous layer was extracted with AcOEt three times. The combined organic layers were washed with brine and dried over MgSO4. After filtration, the solvent was removed under reduced pressure. The crude product was subjected to column chromatography on silica gel (PE/AcOEt, 6:1) to afford 4-phosphanyl-1,2,3-triazoles (4a–4e) in pure form.
1-benzyl-4-(diphenylphosphanyl)-1H-1,2,3-triazole (4a): prepared from 3a (0.1797 g, 0.5 mmol) as a white solid in 85% yield (0.1459 g). Melting point (M.P.): 78–88 °C; 1H NMR (400 MHz, CDCl3) δ 7.46–7.41 (m, 4H), 7.36–7.35 (m, 4H), 7.32–7.31 (m, 6H), 7.24–7.22 (m, 2H), 5.52 (s, 2H). 13C NMR (101 MHz, CDCl3) δ 144.82 (d, J = 6.1 Hz), 136.26 (d, J = 7.1 Hz), 134.47, 133.40 (d, J = 20.2 Hz), 131.43 (d, J = 10.1 Hz), 129.27 (d, J = 26.3 Hz), 128.97 (d, J = 18.2 Hz), 128.69, 128.45 (d, J = 8.1 Hz), 127.91, 53.91. 31P NMR (162 MHz, CDCl3) δ −31.86. HRMS-ESI (m/z) [M+H+] Calcd for C21H19N3P 344.1317; found, 344.1319.
General Procedure for the Synthesis of 1-benzyl-substituted 1,2,3-triazoles (5a–5c). A Schlenk tube of 25 mL equipped with a magnetic stir bar was charged with 3 (1.0 mmol), MeMgBr (1.5 mmol) and THF (5 mL) under nitrogen. The mixture was stirred at 50 °C for 8 h. After quenching with aqueous NH4Cl, the aqueous layer was extracted with AcOEt three times. The combined organic layers were washed with brine and dried over MgSO4. After filtration, the solvent was removed under reduced pressure. The crude product was subjected to column chromatography on silica gel (PE/AcOEt, 4:1) to afford 1-benzyl-substituted 1,2,3-triazoles (5a–5c) in pure form.
1-benzyl-1H-1,2,3-triazole (5a): prepared from 3a (0.3594 g, 1.0 mmol) as a white solid in 95% yield (0.1512 g). 1H NMR (400 MHz, CDCl3) δ 7.64 (s, 1H), 7.41 (s, 1H), 7.33–7.29 (m, 3H), 7.20–7.18 (m, 2H), 5.50 (s, 2H). 13C NMR (101 MHz, CDCl3) δ 134.64, 134.19, 129.06, 128.68, 127.96, 123.28, 53.92.
4. Conclusions
In summary, triphenylphosphine sulfide (L1) could be employed as an inexpensive, stable and efficient ligand for CuAAC reactions of ethynyldiphenylphosphine oxide (1) with azides (2), affording functionalized 4-phosphinyl-1,2,3-triazoles (3). Using CuI/L1 as a catalytic system, the CuAAC between 1 and benzyl azides proceeded smoothly under low catalyst loading and relatively short reaction time conditions, giving the corresponding 4-phosphinyl-1,2,3-triazoles (3a–3o) in high yields. The dual-copper catalytic system CuI/Cu(OAc)2-H2O/L1 efficiently promoted the reactions of alkyl and aryl azides, generating 4-phosphinyl-1,2,3-triazoles (3p–3ah) in reasonable yields. The products (3) could be converted to 4-phosphanyl-1,2,3-triazoles (4) by reduction with PhSiH3 and to 1-benzyl-substituted 1,2,3-triazoles (5) by MeMgBr-accelerated dephosphinylation. Compared to the reported CuAAC for synthesis of 4-phosphinyl-1,2,3-triazoles, our [Cu]/L1-catalyzed protocol exhibited notable advantages such as a low catalyst loading, relatively short reaction time, a broad substrate scope and high yields.
Supplementary Materials
The following supporting information can be downloaded at https://www.mdpi.com/article/10.3390/molecules31214005/s1. Figure S1: ORTEP drawing of 3a; Table S1: Crystal data and structure refinement for 3a. Refs. [34,35,36,37,38,39] are cited in the Supplementary Materials.
Author Contributions
Conceptualization, L.P., A.O. and X.X.; methodology, L.P. and J.S.; software, J.S., J.L. and Z.J.; validation, J.S., J.L. and S.X.; formal analysis, J.S., S.X. and B.Y.; investigation, J.S., J.L. and H.L.; data curation, J.S., L.P., Y.J., Y.O. and Z.T.; writing—original draft preparation, L.P.; writing—review and editing, L.P., Y.O., A.O. and X.X.; supervision, X.X.; project administration, L.P., A.O. and X.X.; funding acquisition, L.P., X.X., Y.J. and A.O. All authors have read and agreed to the published version of the manuscript.
Institutional Review Board Statement
Not applicable.
Informed Consent Statement
Not applicable.
Data Availability Statement
The original contributions presented in this study are included in the article and Supplementary Materials. Further inquiries can be directed to the corresponding authors.
Conflicts of Interest
The authors declare no conflicts of interest.
Funding Statement
This work was financially supported by the Natural Science Fund Project of Hunan Province (No. 2026JJ50395, 2023JJ30224), the Research Foundation of Education Bureau of Hunan Province, China (No. 24B0448), Grant-in-Aid from Japan Society for the Promotion of Science (JP26K08373 (A.O.) and JP23K13755 (Y.O.)), The Iwatani Naoji Foundation (A.O.), and OUS Research Project (OUS-RP-26-1 (A.O.) and OUS-RP-24-7 (Y.O.)).
Footnotes
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.
References
- 1.Markos A., Janecký L., Klepetářová B., Pohl R., Beier P. Stereoselective Synthesis of (Z)-β-Enamido Fluorides from N-Fluoroalkyl- and N-Sulfonyl-1,2,3-triazoles. Org. Lett. 2021;23:4224–4227. doi: 10.1021/acs.orglett.1c01183. [DOI] [PubMed] [Google Scholar]
- 2.Fang D., Zhang Z., Shangguan Z., He Y., Yu C., Li T. (Hetero)arylazo-1,2,3-triazoles: “Clicked” Photoswitches for Versatile Functionalization and Electronic Decoupling. J. Am. Chem. Soc. 2021;143:14502–14510. doi: 10.1021/jacs.1c08704. [DOI] [PubMed] [Google Scholar]
- 3.Fernández-Hernández J.M., Yang C., Beltrán J.I., Lemaur V., Polo F., Fröhlich R., Cornil J., Cola L. Control of the Mutual Arrangement of Cyclometalated Ligands in Cationic Iridium(III) Complexes. Synthesis, Spectroscopy, and Electroluminescence of the Different Isomers. J. Am. Chem. Soc. 2011;133:10543–10558. doi: 10.1021/ja201691b. [DOI] [PubMed] [Google Scholar]
- 4.Nguyen M.L., Byun J., Kim S., Hyun J.W., Hur K., Shin T.J., Cho B.-K. Ferroelectrically Switching Helical Columnar Assembly Comprising Cisoid Conformers of a 1,2,3-Triazole-based Liquid Crystal. Angew. Chem. Int. Ed. 2019;58:2749–2753. doi: 10.1002/anie.201813195. [DOI] [PubMed] [Google Scholar]
- 5.Srinivasachari S., Fichter K.M., Reineke T.M. Polycationic β-Cyclodextrin “Click Clusters”: Monodisperse and Versatile Scaffolds for Nucleic Acid Delivery. J. Am. Chem. Soc. 2008;130:4618–4627. doi: 10.1021/ja074597v. [DOI] [PubMed] [Google Scholar]
- 6.Weïwer M., Chen C., Kemp M.M., Linhardt R.J. Synthesis and Biological Evaluation of Non-Hydrolyzable 1,2,3-Triazole-Linked Sialic Acid Derivatives as Neuraminidase Inhibitors. Eur. J. Org. Chem. 2009;2009:2611–2620. doi: 10.1002/ejoc.200900117. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 7.Peng L., Chen J., Chen Y., Lu H., Okuda Y., Tang Z., Orita A., Qiu R., Yin S.-F. Sulfur-Containing 1,2,3-Triazoles: Synthesis and Properties. Eur. J. Org. Chem. 2024;27:e202301146. doi: 10.1002/ejoc.202301146. [DOI] [Google Scholar]
- 8.Crimmins M.T., Zuccarello J.L., McDougall P.J., Ellis J.M. Enantioselective Total Synthesis of Brevetoxin A: Convergent Coupling Strategy and Completion. Chem. Eur. J. 2009;15:9235–9244. doi: 10.1002/chem.200900777. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 9.Peng L., Xu F., Shinohara K., Nishida T., Wakamatsu K., Orita A., Otera J. Remarkable Electron-withdrawing Effect of the Ph2P(O)-Ethynyl Group: Ph2P(O)-Ethynyl-substituted Aryl Halides and Copper Acetylides for Tailor-made Sonogashira Couplings. Org. Chem. Front. 2015;2:248–252. doi: 10.1039/c4qo00325j. [DOI] [Google Scholar]
- 10.Okuda Y., Imafuku K., Tsuchida Y., Seo T., Akashi H., Orita A. Process-Controlled Regiodivergent Copper-Catalyzed Azide–Alkyne Cycloadditions: Tailor-made Syntheses of 4- and 5-Bromotriazoles from Bromo(phosphoryl)ethyne. Org. Lett. 2020;22:5099–5103. doi: 10.1021/acs.orglett.0c01681. [DOI] [PubMed] [Google Scholar]
- 11.Masuda Y., Ikeshita D., Higashida K., Yoshida M., Ishida N., Murakami M., Sawamura M. Photocatalytic 1,2-Phosphorus-Migrative [3 + 2] Cycloaddition of Tri(t-butyl)phosphine with Terminal Alkynes. J. Am. Chem. Soc. 2023;145:19060–19066. doi: 10.1021/jacs.3c06760. [DOI] [PubMed] [Google Scholar]
- 12.Jana K., Zhao Z., Musies J., Sparr C. Atroposelective Arene-Forming Wittig Reaction by Phosphorus PIII/PV=O Redox Catalysis. Angew. Chem. Int. Ed. 2024;63:e202408159. doi: 10.1002/anie.202408159. [DOI] [PubMed] [Google Scholar]
- 13.Peng L., Hu Z., Zhao Y., Peng L., Xu Z., Yin S.-F., Tang Z., Qiu R., Kambe N. One-pot Synthesis of Phosphorylnaphth[2,1-d]oxazoles and Products as P,N-Ligands in C–N and C–C Formation. Org. Biomol. Chem. 2022;20:4110–4114. doi: 10.1039/d2ob00565d. [DOI] [PubMed] [Google Scholar]
- 14.Peng L., Hu Z., Tang Z., Jiao Y., Xu X. Recent Progress in Transition Metal Catalyzed Cross Coupling of Nitroarenes. Chin. Chem. Lett. 2019;30:1481–1487. doi: 10.1016/j.cclet.2019.04.008. [DOI] [Google Scholar]
- 15.Peng L., Yuan Z., Tang Z., Zeng C., Xu X. Thioalkynes in Ring Forming Reactions. Chem. Rec. 2023;23:e202300242. doi: 10.1002/tcr.202300242. [DOI] [PubMed] [Google Scholar]
- 16.Cauteruccio S., Dova D., Benaglia M., Genoni A., Orlandi M., Licandroet E. Synthesis, Characterisation, and Organocatalytic Activity of Chiral Tetrathiahelicene Diphosphine Oxides. Eur. J. Org. Chem. 2014;2014:2694–2702. doi: 10.1002/ejoc.201301912. [DOI] [Google Scholar]
- 17.Huang Y., Lin X. Organophotoredox-Catalyzed [3 + 2] Cycloaddition for the Diastereoselective Synthesis of Spirocyclopentane Oxindoles. Eur. J. Org. Chem. 2026;29:e202501227. doi: 10.1002/ejoc.202501227. [DOI] [Google Scholar]
- 18.Johnson M.K., Jacobsen D., Meredith T.J., Eyer P., Heath A.J., Ligtenstein D.A., Marrs T.C., Szinicz L., Vale J.A., Haines J.A. Evaluation of antidotes for poisoning by organophosphorus pesticides. Emerg. Med. 2000;12:22–37. doi: 10.1046/j.1442-2026.2000.00087.x. [DOI] [Google Scholar]
- 19.Kee J.-M., Villani B., Carpenter L.R., Muir T.W. Development of Stable Phosphohistidine Analogues. J. Am. Chem. Soc. 2010;132:14327–14329. doi: 10.1021/ja104393t. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 20.He X., Lin J., Kan W.H., Dong P., Trudel S., Baumgartner T. Molecular Engineering of “Click”-Phospholes Towards Self-Assembled Luminescent Soft Materials. Adv. Funct. Mater. 2014;24:897–906. doi: 10.1002/adfm.201302294. [DOI] [Google Scholar]
- 21.Li B., Hildebrandt S., Hagenbach A., Abram U. Tricarbonylrhenium(I) and -technetium(I) Complexes with Tris(1,2,3-triazolyl)phosphine Oxides. Z. Anorg. Allg. Chem. 2021;647:1070–1076. doi: 10.1002/zaac.202100010. [DOI] [Google Scholar]
- 22.Zink D.M., Grab T., Baumann T., Nieger M., Barnes E.C., Klopper W., Bräse S. Experimental and Theoretical Study of Novel Luminescent Di-, Tri-, and Tetranuclear Copper Triazole Complexes. Organometallics. 2011;30:3275–3283. doi: 10.1021/om1011648. [DOI] [Google Scholar]
- 23.Liu D., Gao W., Dai Q., Zhang X. Triazole-Based Monophosphines for Suzuki–Miyaura Coupling and Amination Reactions of Aryl Chlorides. Org. Lett. 2005;7:4907–4910. doi: 10.1021/ol051844w. [DOI] [PubMed] [Google Scholar]
- 24.Dresler E., Woliński P., Wróblewska A., Jasiński R. On the Question of Zwitterionic Intermediates in the [3 + 2] Cycloaddition Reactions between Aryl Azides and Ethyl Propiolate. Molecules. 2023;28:8152. doi: 10.3390/molecules28248152. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 25.Jasiński R. Nitroacetylene as dipolarophile in [2 + 3] cycloaddition reactions with allenyl-type three-atom components: DFT computational study. Monatsh. Chem. 2015;146:591–599. doi: 10.1007/s00706-014-1389-0. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 26.Seifert T.P., Bestgen S., Feuerstein T.J., Lebedkin S., Krämer F., Fengler C., Gamer M.T., Kappesb M.M., Roesky P.W. Phosphine-substituted 1,2,3-Triazoles as P,C- and P,N-Ligands for Photoluminescent Coinage Metal Complexes. Dalton Trans. 2019;48:15427–15434. doi: 10.1039/c9dt01239g. [DOI] [PubMed] [Google Scholar]
- 27.Zhu R., Chen L., Hu X., Zhou F., Zhou J. Enantioselective Synthesis of P-Chiral Tertiary Phosphine Oxides with an Ethynyl Group via Cu(i)-Catalyzed Azide–alkyne Cycloaddition. Chem. Sci. 2020;11:97–106. doi: 10.1039/c9sc04938j. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 28.Laborde C., Wei M., Lee A., Deydier E., Daran J.-C., Vollea J.-N., Poli R., Pirat J.-L., Manoury E., Virieux D. Double [3 + 2]-Dimerisation Cascade Synthesis of Bis(triazolyl)bisphosphanes, a New Scaffold for Bidentate Bisphosphanes. Dalton Trans. 2015;44:12539–12545. doi: 10.1039/c5dt02197a. [DOI] [PubMed] [Google Scholar]
- 29.Ahamad S., Kant R., Mohanan K. Metal-Free Three-Component Domino Approach to Phosphonylated Triazolines and Triazoles. Org. Lett. 2016;18:280–283. doi: 10.1021/acs.orglett.5b03437. [DOI] [PubMed] [Google Scholar]
- 30.Vidal C., García-Álvarez J. Glycerol: A Biorenewable Solvent for Base-free Cu(i)-Catalyzed 1,3-Dipolar Cycloaddition of Azides with Terminal and 1-Iodoalkynes. Highly Efficient Transformations and Catalyst Recycling. Green Chem. 2014;16:3515–3521. doi: 10.1039/c4gc00451e. [DOI] [Google Scholar]
- 31.Díez-González S., Nolan S.P. [(NHC)2Cu]X Complexes as Efficient Catalysts for Azide–Alkyne Click Chemistry at Low Catalyst Loadings. Angew. Chem. Int. Ed. 2008;47:8881–8884. doi: 10.1002/anie.200803289. [DOI] [PubMed] [Google Scholar]
- 32.Shen J., Li J., Xu S., Wang T., Zou Z., Li H., Peng L., Tang Z., Xu X. 4-Sulfanyl-1,2,3-triazole as a Powerful Ligand in CuAAC to Synthesize 1,4-Substituted 1,2,3-Triazoles Under Solvent-Free and Low Catalyst Loading. Molecules. 2026;31:1723. doi: 10.3390/molecules31101723. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 33.Demchuk O.M., Jasiński R., Pietrusiewicz K.M. New Insights into the Mechanism of Reduction of Tertiary Phosphine Oxides by Means of Phenylsilane. Heteroat. Chem. 2015;26:441–448. doi: 10.1002/hc.21279. [DOI] [Google Scholar]
- 34.Patel A., Naumann R.A., Frank L.G., Williams V.E., Romero N.A. Alkenylthianthrenium Salts as Synthetic Equivalents of (Cyclo)alkynes in Azide Cycloaddition Reactions. Angew. Chem. Int. Ed. 2026;65:e20308. doi: 10.1002/anie.202520308. [DOI] [PubMed] [Google Scholar]
- 35.Fu R., Lei Y., Wang Y., Huang B., Qiu D., Wang J. Synthesis of Substituted 1-Benzyl-2H-1,2,3-Triazoles by a Click Reaction Using Calcium Carbide as an Acetylene Source. Synlett. 2025;36:874–878. doi: 10.1055/a-2414-2708. [DOI] [Google Scholar]
- 36.Voronin V.V., Ledovskaya M.S., Rodygin K.S., Ananikov V.P. Cycloaddition Reactions of in situ Generated C2D2 in Dioxane: Efficient Synthetic Approach to D2-Labeled Nitrogen Heterocycles. Eur. J. Org. Chem. 2021;41:5640–5648. doi: 10.1002/ejoc.202101085. [DOI] [Google Scholar]
- 37.Dolomanov O.V., Bourhis L.J., Gildea R.J., Howard J.A.K., Puschmann H. OLEX2: A Complete Structure Solution, Refinement and Analysis Pprogram. J. Appl. Cryst. 2009;42:339–341. doi: 10.1107/s0021889808042726. [DOI] [Google Scholar]
- 38.Kratzert D., Krossing I., Holstein J.J. DSR: Enhanced Modelling and Refinement of Disordered Structures with SHELXL. J. Appl. Cryst. 2015;48:933–938. doi: 10.1107/s1600576715005580. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 39.Peng L., Zhao Y., Okuda Y., Le L., Tang Z., Yin S., Qiu R., Orita A. Process-Divergent Syntheses of 4- and 5-Sulfur-Functionalized 1,2,3-Triazoles via Copper-Catalyzed Azide–Alkyne Cycloadditions of 1-Phosphinyl-2-sulfanylethynes. J. Org. Chem. 2023;88:3089–3108. doi: 10.1021/acs.joc.2c02876. [DOI] [PubMed] [Google Scholar]
Associated Data
This section collects any data citations, data availability statements, or supplementary materials included in this article.
Supplementary Materials
Data Availability Statement
The original contributions presented in this study are included in the article and Supplementary Materials. Further inquiries can be directed to the corresponding authors.
