Skip to main content
Nanomaterials logoLink to Nanomaterials
. 2026 Oct 29;16(21):1388. doi: 10.3390/nano16211388

Near-Unity and Narrowband Light Absorption in Mid-Infrared α-MoO3-Based Metasurfaces

Didi Song 1, Wei Li 1, Lijia Wan 1, Yufang Liu 2, Xiaohu Wu 3,4,5,*, Kun Yu 2,*
Editors: Meng-Hsin Chen, Vin-Cent Su
PMCID: PMC13765439  PMID: 43029409

Abstract

Accessing mid-infrared narrowband absorption is crucial for applications such as spectroscopic analysis, infrared imaging and optical sensing. Here, we investigate the interaction between light and α-phase molybdenum trioxide (α-MoO3) nanocavities, uncovering pronounced and highly tunable resonant responses across the hyperbolic transition regime. Moving beyond standard phonon polariton excitations, our results reveal that the elevated refractive index of α-MoO3 beyond the Reststrahlen band promotes strong electromagnetic confinement and enhanced light-matter coupling in subwavelength nanostructures across the 12–13 μm spectral window. Analysis of the electric-field distributions reveals a hybrid collective mode arising from the interaction between Fabry–Perot cavity modes and geometry-dependent Mie-type resonances, leading to absorption approaching unity together with spectrally sharp resonances exhibiting quality factors exceeding 100 near the transverse-optical phonon frequency of α-MoO3. These findings provide novel insights for the development of compact mid-infrared photonic structures for tailoring thermal emission and enhancing electromagnetic coupling in α-MoO3-based nanophotonic platforms.

Keywords: Mid-infrared, narrowband light absorption, α-MoO3, metasurfaces

1. Introduction

Efficient manipulation and absorption of light are essential for advancing micro- and nano-optoelectronic technologies. Mid-infrared (MIR) light absorption has found extensive applications in photodetection [1,2], gas sensing [3,4], infrared thermal imaging [5,6], and medical diagnostics [7,8]. These applications often require narrowband spectral responses, highlighting the importance of developing highly efficient narrowband absorbers. Resonant approaches to light manipulation and absorption include gratings [9], photonic crystals, and dielectric resonators [10,11], with material platforms ranging from metals such as gold [12] and dielectrics such as zinc sulfide [13] and germanium [14] to polar dielectrics. Owing to their intrinsic phonon resonances, polar dielectrics—such as silicon carbide (SiC) and hexagonal boron nitride (hBN)—offer distinctive opportunities for manipulating electromagnetic fields and optical coupling in the MIR regime, attracting considerable attention in recent years [13,14,15,16,17,18,19,20,21]. For instance, overlapping electric and magnetic Mie resonances have enabled narrowband absorption in SiC near 13 μm [15], while Fabry–Perot (FP)-like and Mie-like responses have been investigated in hBN in the 7–8 μm region [16]. More generally, coupling between optical phonons and photonic modes can give rise to hybrid light-matter states, expanding the possibilities for infrared optoelectronic applications.

Recently, polar van der Waals crystals that support phonon polaritons have attracted widespread attention for their remarkable capability to confine infrared light at subwavelength scales, thereby enabling precise light guidance and manipulation at the nanoscale [22,23]. In particular, α-phase molybdenum trioxide (α-MoO3) has emerged as a natural polar van der Waals crystal, characterized by three orthogonal crystal axes, three Reststrahlen bands (RBs), and the ability to support highly confined hyperbolic phonon polaritons in the MIR range [24,25,26]. Studies have shown that phonon polaritons supported by α-MoO3 films exhibit remarkable electromagnetic responses in the infrared regime, featuring extreme field localization [27], low-loss polaritonic propagation, and strongly anisotropic optical coupling [26,28]. These characteristics make α-MoO3 a promising platform for a variety of applications, including super-resolution imaging [26], directional thermal energy transfer [29], molecular vibrational sensing, and photodetection [30,31]. Previous research on α-MoO3 has predominantly concentrated on its in-plane hyperbolic characteristics. The transition across the RB (i.e., from hyperbolic to highly anisotropic dielectric) and the role of strong material dispersion on the dynamics of excitations in micro- and nanostructured α-MoO3 remain unexplored. In particular, near the transverse optical (TO) phonon resonance associated with the [100] direction, large positive values of Re(εx) provide a high refractive index for light polarized along this direction, supporting resonances in structures with subwavelength thicknesses [15]. This phonon-induced dielectric dispersion makes α-MoO3 a suitable platform for investigating geometry-tunable narrowband absorption in the 12–13 μm region.

In this work, we examine light-matter interactions within subwavelength α-MoO3 metasurfaces operating near the TO phonon frequency associated with the upper RB as α-MoO3 evolves from a hyperbolic to a dielectric regime. Under transverse magnetic (TM) polarization, the proposed α-MoO3 nanostructure is shown to support tunable near-perfect absorption in the MIR range, particularly where the dielectric permittivity along the [100] crystallographic direction remains positive (i.e., εx > 0). The evolution of the resonant response across the upper Reststrahlen band and the hyperbolic-to-dielectric transition is systematically investigated as a function of nanocavity geometry. Particular attention is devoted to the interplay among hyperbolic phonon polaritons, FP-like resonances, Mie-type resonances, and geometric confinement effects. Finally, we demonstrate that this subwavelength structure supports multiple high-quality resonances, with Q factors exceeding 100, that can be precisely tuned through the α-MoO3 nanostructure.

2. Theoretical Model and Method

Figure 1a illustrates the proposed planar FP nanocavity composed of an α-MoO3 thin film and a gold (Au) substrate. The permittivity of the Au substrate is derived from the Drude model [32], with a fixed thickness of 0.2 μm, which exhibits near-perfect reflection in the MIR range, thereby enhancing the interaction between light and the α-MoO3 film. The FP cavity is formed within the α-MoO3 film between the air/α-MoO3 and α-MoO3/Au interfaces. The Au layer acts as a back reflector, while optical propagation and the associated phase accumulation occur within the α-MoO3 film. Reflections at the two interfaces give rise to thin-film interference, allowing FP resonances at subwavelength film thicknesses owing to the high refractive index near the relevant TO phonon resonance [15,33]. The total absorptance of the Au-backed structure is calculated as A = 1 − R, where R is the reflectance and transmission through the optically thick Au film is neglected. This absorptance includes losses in both α-MoO3 and Au, whose individual contributions have not been separately quantified. Unless otherwise specified, the reported spectra are calculated at normal incidence with the incident electric field aligned along the [100] crystallographic direction (the x-axis). The thickness of α-MoO3 is denoted as d1. Given that optical phonons primarily influence the optical properties of α-MoO3 in the MIR range, its complex permittivity can be effectively modeled using the Lorentz framework:

εj=ε∞,j1+ωLO,j2−ωTO,j2ωTO,j2−ω2+iΓjω,j=x,y,z. (1)

where ε∞,j and Γj denote the high-frequency dielectric constant and phonon damping coefficient, respectively, while ωLO,j and ωTO,j denote the longitudinal optical (LO) and TO phonon frequencies that define the boundaries of the RB along the corresponding crystallographic direction j. The specific parameters for these variables are detailed in reference [34]. Here, x, y and z represent the three principal axes of the crystal, aligning with the crystallographic directions [100], [001] and [010] of α-MoO3, respectively. Figure 1b,c display the real and imaginary parts of the permittivity of α-MoO3 along its three principal crystal axes within the wavelength range of 10–16 μm. One can see that Re(εx) is negative in the 10.3–12.19 μm range. As the TO phonon frequency is approached, α-MoO3 exhibits a pronounced increase in refractive index, leading to the excitation of subwavelength dielectric resonances and Fabry–Perot cavity behaviour within the film.

Figure 1.

Figure 1

(a) Schematic illustration of the proposed planar α-MoO3 nanocavity (the arrows indicate the coordinate axes (x, y, z), the polarization direction of the incident light (TM), and the thickness of the α-MoO3 layer (d1)). (b,c) Real and imaginary components of the dielectric permittivity of α-MoO3 along its principal crystallographic axes over the 10–16 μm spectral range.

In this study, we employed the transfer matrix method to numerically compute the absorption spectrum of the planar α-MoO3 nanocavity. Additionally, we utilized the Wave Optics module in COMSOL Multiphysics 6.1 to perform finite element simulations and analyze the optical properties of the α-MoO3 disk array. By integrating the transfer matrix method and finite element methods, we achieved a more comprehensive understanding of the optical performance of α-MoO3, providing a theoretical foundation and technical support for its applications in optical devices and sensors.

3. Results

We initiate our analysis by investigating the resonant interaction between photons and phonons within planar α-MoO3 nanocavities. Figure 2a depicts the evolution of the nanocavity absorption spectrum with increasing α-MoO3 thickness under TM polarization. Multiple resonant absorption branches are observed near a wavelength of 12.19 μm (indicated by the white dashed line). As d1 increases, the resonance wavelength undergoes a redshift, consistent with the resonance evolution expected for a FP cavity operating in a regime of normal dispersion. Figure 2b shows the absorption spectra of α-MoO3 nanocavities with thicknesses of 0.4 μm and 1.6 μm, extracted from Figure 2a. When d1 is 0.4 μm, the nanocavity exhibits an almost complete absorption response (A ≈ 0.99) occurring at 12.39 μm, accompanied by a high-quality factor (Q ≈ 83), crucial for designing narrowband infrared emitters and filters. As the thickness of α-MoO3, d1, increases to 1.6 μm, the absorption spectrum reveals two prominent absorption peaks at wavelengths of 12.30 μm and 12.54 μm, corresponding to high-order and low-order vibrational modes within the FP cavity. Notably, at a wavelength of 12.54 μm, the absorption reaches 0.99 with the Q approximately 105. This near-unity absorptance indicates strong suppression of reflection from the Au-backed structure at resonance. Additionally, the observed nearly perfect light absorption is accompanied by narrowband characteristics, attributed to the strong dispersion of the dielectric constant near the TO resonance of α-MoO3. Taking wavelengths of 12.39 μm and 12.54 μm as examples, the absorption as a function of the α-MoO3 thickness is shown in Figure 2c,d. The results indicate multiple peaks in the absorption spectra of α-MoO3, attributed to FP resonances. The resonance period is approximately 0.85 μm at a wavelength of 12.39 μm and 1.09 μm at a wavelength of 12.54 μm. At a wavelength of 12.39 μm, the first-order FP resonance is supported by an α-MoO3 thickness of 0.41 μm, whereas a thickness of approximately 1.62 μm is required to sustain the second-order resonance at 12.54 μm. The predicted resonance conditions are in close agreement with the numerical calculations. Therefore, the resonant energy of photon-phonon interactions in planar α-MoO3 nanocavities is primarily influenced by the thickness of the α-MoO3 film.

Figure 2.

Figure 2

Nanocavity of α-MoO3 thin films. (a) Two-dimensional absorption map of the nanocavity for varying α-MoO3 thickness. The white dashed line in (a) denotes the onset of RB near the TO phonon energy, where the sign of εx changes. (b) Absorption spectra for selected α-MoO3 thicknesses (d1) of 0.4 μm and 1.6 μm. Absorption variation with α-MoO3 thickness at wavelengths of (c) 12.39 μm and (d) 12.54 μm.

Next, we extend planar α-MoO3 films to patterned arrays of α-MoO3 disks, aiming to explore how nanoscale structures can be designed to manipulate the dispersion properties of the material. Figure 3a depicts a schematic of the patterned α-MoO3 microstructure, consisting of a periodic arrangement of α-MoO3 disk arrays and continuous Au films. The thickness of the α-MoO3 disks is denoted as d1, with a fixed thickness of 0.2 μm for the Au layer to ensure structural opacity, as shown in Figure 3b. The radius of the α-MoO3 disks is denoted as r, following a periodic distribution in both the x and y directions, with a period (P) of 8.4 μm. Our goal is to investigate the resonant modes of α-MoO3 in the dielectric constant (εx > 0) under TM-polarized light, and to elucidate the evolution of light-matter interactions through the hyperbolic-to-dielectric transition near the TO phonon frequency.

Figure 3.

Figure 3

(a) Schematic illustration of the α-MoO3 disk array microstructure (where r denotes the disk radius). (b) Side view of the microstructure (where P denotes the array period and d1 denotes the thickness of the α-MoO3 layer).

Firstly, we performed detailed numerical simulations to calculate the variation in light absorption along the RB edge hyperbolic transition with changes in α-MoO3 film thickness. Figure 4 presents a color map of the absorption spectra of α-MoO3 disk arrays as a function of disk radius for various α-MoO3 thicknesses. For thinner α-MoO3 films (d1 = 0.1 μm and d1 = 0.3 μm, see Figure 4a,b), only one resonance mode is observed within the range of εx > 0. As the thickness of α-MoO3 increased, this resonance mode shifted to longer wavelengths, consistent with the results observed for the FP nanocavity in Figure 2. For thicker α-MoO3 films, additional higher-order resonance modes can be observed, as shown in Figure 4d. These modes enable strong and tunable light absorption in subwavelength structured films over the wavelength range of 11.5 μm to 13 μm. These findings provide critical insights for the engineering control of absorption and emissivity in subwavelength structured films, offering new directions for the design and optimization of optical devices. To further investigate the interaction between light and α-MoO3, we considered two different α-MoO3 film thicknesses: an ultrathin film with d1 = 0.3 μm and a thicker film with d1 = 0.7 μm. The thicker film is expected to exhibit a broader range of excitation phenomena.

Figure 4.

Figure 4

Broadband tunable strong MIR light–material interactions. Calculated absorption spectra in α-MoO3 disk arrays with varying disk radius for (a) d1 = 0.1 μm, (b) d1 = 0.3 μm, (c) d1 = 0.5 μm, and (d) d1 = 0.7 μm films, respectively. Dashed lines in each plot denote the onset of the RB near the TO phonon energy, marking the transition where εx changes sign.

We investigated the absorption spectra of patterned α-MoO3 nanocavities with d1 = 0.3 μm for various disk radius under TM polarization. In Figure 5a, a single resonant mode is observed as the radius of the α-MoO3 disks increases from 1.4 μm to 4 μm within the wavelength range of 12.19–13 μm (εx > 0), with a slight redshift in the resonance wavelength. When r is 4 μm, the nanocavity exhibits an absorption of 0.6 at a wavelength of 12.28 μm, achieving a Q factor of 123. This excitation exhibits FP-like characteristics, qualitatively resembling the response observed in the planar α-MoO3 nanocavity (Figure 2). To examine the field distribution of this resonance, Figure 5b shows the electric-field distributions in the x–y and x–z planes at 12.28 μm. In the x–y plane, edge effects significantly enhance the electric field at the disk edges. In the x–z plane, the electric field is mainly confined within the α-MoO3 cavity, effectively trapping light and enhancing light-matter interactions. The edge-field enhancement also indicates the influence of the finite lateral geometry on this FP-like response. Although this resonance provides a narrow spectral response with a Q factor of 123, its peak absorptance of 0.6 indicates that this particular configuration does not achieve near-unity absorption. By adjusting the radius of the α-MoO3 disks, the optical resonance characteristics can be precisely controlled. Under TM polarization, the unique tuning characteristics of the absorption spectra and electric field distribution provide new insights for the design and application of nanophotonics and infrared optical devices.

Figure 5.

Figure 5

Study of thin α-MoO3 disk arrays with d1 = 0.3 μm. (a) Absorption spectra of α-MoO3 disk arrays with different radii. (b) With a radius of 4 μm, the excitation field intensity of the α-MoO3 disk array at the resonance wavelength of 12.28 μm is analyzed in the x–y plane and x–z plane.

Next, we investigated the absorption spectra of patterned α-MoO3 nanocavities with d1 = 0.7 μm as the radius varied, as shown in Figure 6. Unlike the case with d1 = 0.3 μm, the thicker α-MoO3 film exhibits multiple resonant absorption features associated with phonon-polaritonic excitations within the RB region (11.75–12.19 μm). Simultaneously, a set of resonance absorption peaks strongly dependent on the disk radius is observed when εx > 0 (within the wavelength range of 12.19 to 13 μm). The phonon polariton branches can also be clearly observed in Figure 4d, exhibiting strong dispersion with varying disk radius. This behavior can be explained by the dispersion of phonon polaritons in the planar α-MoO3 film and the hyperbolicity of the optical dispersion of α-MoO3 within the RB. Specifically, the disk radius r determines the effective wavevector of the excited phonon polariton, kpp, which relates to kpp ∝ 1/r and possesses in-plane directionality, i.e., kx∼kpp [23]. Therefore, a smaller disk radius implies larger planar wavevectors kx for the excited modes. According to the dispersion relation, these modes deviate from the resonance wavelength of 12.19 μm, extending into the RB region, when |εx| approaches 0. Conversely, a larger disk radius necessitates a smaller kpp, achievable under larger |εx|. Moreover, a larger disk radius can also excite higher-order phonon polariton modes, leading to a redshift in resonance wavelength as the disk radius increases.

Figure 6.

Figure 6

Absorption spectra of α-MoO3 disk arrays with radii of 2.6 μm, 3 μm, and 3.6 μm for a fixed d1 of 0.7 μm.

Figure 7 illustrates the excitation field distribution of α-MoO3 disk arrays with d1 = 0.7 μm and r = 3.6 μm at resonant wavelengths of 11.9 μm, 12.25 μm, 12.38 μm, and 12.6 μm. In Figure 7a, a clear observation of high-k mode excitation inside the disk is evident. Such modes typically occur within the hyperbolic band (where the dielectric constant along the x-axis of α-MoO3 is negative), indicating highly localized electric field enhancement within this region due to the disk structure. Figure 7d displays the field strength distribution at the resonant wavelength of 12.6 μm. These modes occur in the region where the dielectric constant along the x-axis of α-MoO3 is positive, resembling FP resonances and exhibiting characteristics akin to standing wave modes in thin films. The field patterns at resonant wavelengths of 12.25 μm and 12.38 μm (Figure 7b and Figure 7c, respectively) distinctly differ from those at 12.6 μm (Figure 7d), displaying characteristics similar to Mie-like resonances. These distinct field patterns suggest additional effects of lateral confinement introduced by the finite disk geometry. The FP-like and Mie-like designations describe qualitative resonance characteristics in this anisotropic, metal-backed structure, where thin-film interference and lateral confinement can both influence the response. For the near-unity narrowband absorption functionality considered here, resonance selection should consider both peak absorptance and spectral linewidth. Neither the FP-like nor the Mie-like designation alone determines suitability for this objective. The spectral evolution and field distributions illustrate the combined influence of the α-MoO3 dielectric response and structural geometry on the optical response, providing guidance for the design of α-MoO3-based resonant absorbers.

Figure 7.

Figure 7

Electric field distributions of α-MoO3 disk arrays (d1 = 0.7 μm, r = 3.6 μm) at resonance wavelengths of (a) 11.9 μm, (b) 12.25 μm, (c) 12.38 μm, and (d) 12.6 μm.

4. Conclusions

In summary, the metasurface design provides a platform for investigating the strong coupling of infrared light with phonons in α-MoO3. Extending beyond conventional studies of phonon polariton branches, our work demonstrates that the high refractive index of α-MoO3, coupled with its extreme dispersion in the εx > 0 region, enables the effective utilization of subwavelength structures. Narrowband resonances with Q factors up to 123 in the 12.2–13.5 μm range exhibit nearly uniform absorption, offering potential applications in infrared sources, thermal management, and spectroscopy. Furthermore, exploiting the dispersion and anisotropy of α-MoO3 offers new degrees of freedom for designing infrared radiation across multiple spectral bands.

Abbreviations

The following abbreviations are used in this manuscript:

α-MoO3 α-phase molybdenum trioxide
MIR Mid-infrared
hBN hexagonal boron nitride
RB Reststrahlen band
TO Transverse Optical
TM Transverse Magnetic
FP Fabry–Perot
LO Longitudinal Optical

Author Contributions

Conceptualization, D.S. and X.W.; methodology, X.W.; software, K.Y. and X.W.; validation, D.S. and X.W.; formal analysis, D.S.; investigation, D.S.; data curation, D.S. and X.W.; writing—original draft preparation, D.S.; writing—review and editing, D.S.; visualization, D.S. and X.W.; supervision, W.L., L.W. and Y.L.; funding acquisition, K.Y. All authors have read and agreed to the published version of the manuscript.

Data Availability Statement

The participants of this study did not give written consent for their data to be shared publicly, so due to the sensitive nature of the research, supporting data is not available.

Conflicts of Interest

The authors declare no conflicts of interest.

Funding Statement

This work was supported by the National Natural Science Foundation of China (62075058), Natural Science Foundation of Henan Province (222300420011, 222300420209), Program for Innovative Research Team (in Science and Technology) in University of Henan Province (23IRTSTHN013), Jiangxi Provincial Training Program for Young Scientific and Technological Talents in the Early Career Stage (No. 20252BEJ730296).

Footnotes

Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

References

  • 1.Xue X., Chen M., Luo Y., Qin T., Tang X., Hao Q. High-operating-temperature mid-infrared photodetectors via quantum dot gradient homojunction. Light Sci. Appl. 2023;12:2. doi: 10.1038/s41377-022-01014-0. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 2.Zheng B., Zhao H., Cerjan B., Yazdi S., Ringe E., Nordlander P., Halas N.J. A room-temperature mid-infrared photodetector for on-chip molecular vibrational spectroscopy. Appl. Phys. Lett. 2018;113:101105. doi: 10.1063/1.5045663. [DOI] [Google Scholar]
  • 3.Dhall S., Mehta B.R., Tyagi A.K., Sood K. A review on environmental gas sensors: Materials and technologies. Sens. Int. 2021;2:100116. doi: 10.1016/j.sintl.2021.100116. [DOI] [Google Scholar]
  • 4.Jung H.-T. The present and future of gas sensors. ACS Sens. 2022;7:912–913. doi: 10.1021/acssensors.2c00688. [DOI] [PubMed] [Google Scholar]
  • 5.Dlesk A., Vach K., Pavelka K. Photogrammetric co-processing of thermal infrared images and RGB images. Sensors. 2022;22:1655. doi: 10.3390/s22041655. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 6.Wang Z., Zhou J., Ma J., Wang Y., Liu S., Ding L., Tang W., Pakezhamu N., Meng L. Removing temperature drift and temporal variation in thermal infrared images of a UAV uncooled thermal infrared imager. ISPRS J. Photogramm. Remote Sens. 2023;203:392–411. doi: 10.1016/j.isprsjprs.2023.08.011. [DOI] [Google Scholar]
  • 7.Kassal P., Steinberg M.D., Steinberg I.M. Wireless chemical sensors and biosensors: A review. Sens. Actuators B Chem. 2018;266:228–245. doi: 10.1016/j.snb.2018.03.074. [DOI] [Google Scholar]
  • 8.Zhang Z., Lee Y., Haque M.F., Leem J., Hsieh E.Y., Nam S.W. Plasmonic sensors based on graphene and graphene hybrid materials. Nano Converg. 2022;9:28. doi: 10.1186/s40580-022-00319-5. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 9.Wang Y., Wang M., Liu H., Wu B., Wang X., Wu X. A multi-dimensional photodetector based on an α-MoO3 grating and graphene. Phys. Chem. Chem. Phys. 2024;26:17102–17109. doi: 10.1039/D4CP01293C. [DOI] [PubMed] [Google Scholar]
  • 10.Serebryannikov A.E., Fataliyev K., Cakmak A.O., Colak E. Capability of Dielectric Resonator Based Meta-Atoms with VO2 Components for Switchable Coding and Wavefront-Manipulating THz Metasurfaces. Materials. 2026;19:2449. doi: 10.3390/ma19122449. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 11.Ma B., Huang Y., Zha W., Qin B., Qin R., Ghosh P., Kaur S., Qiu M., Li Q. Narrowband diffuse thermal emitter based on surface phonon polaritons. Nanophotonics. 2022;11:4115–4122. doi: 10.1515/nanoph-2022-0047. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 12.Biener G., Dahan N., Niv A., Kleiner V., Hasman E. Highly coherent thermal emission obtained by plasmonic bandgap structures. Appl. Phys. Lett. 2008;92:081913. doi: 10.1063/1.2883948. [DOI] [Google Scholar]
  • 13.Zhu H., Luo H., Li Q., Zhao D., Cai L., Du K., Xu Z., Ghosh P., Qiu M. Tunable narrowband mid-infrared thermal emitter with a bilayer cavity enhanced Tamm plasmon. Opt. Lett. 2018;43:5230–5233. doi: 10.1364/OL.43.005230. [DOI] [PubMed] [Google Scholar]
  • 14.Li J., Wei K., Zhang Y., Li X., Cui H. High-performance binary blazed grating coupler with a mixed structure of germanium and zinc selenide. Microw. Opt. Technol. Lett. 2023;65:771–776. doi: 10.1002/mop.33570. [DOI] [Google Scholar]
  • 15.Howes A., Nolen J.R., Caldwell J.D., Valentine J. Near-unity and narrowband thermal emissivity in balanced dielectric metasurfaces. Adv. Opt. Mater. 2020;8:1901470. doi: 10.1002/adom.201901470. [DOI] [Google Scholar]
  • 16.Ling H., Nourbakhsh M., Whiteside V.R., Tischler J.G., Davoyan A.R. Near-unity light-matter interaction in mid-infrared van der Waals metasurfaces. Nano Lett. 2024;24:3315–3322. doi: 10.1021/acs.nanolett.3c04118. [DOI] [PubMed] [Google Scholar]
  • 17.Shen H., Yang L., Jin Y., He S. Perfect mid-infrared dual-band optical absorption realized by a simple lithography-free polar dielectric/metal double-layer nanostructure. Opt. Express. 2020;28:31414–31424. doi: 10.1364/OE.402851. [DOI] [PubMed] [Google Scholar]
  • 18.Yue L., Xie P., Shen S., Ding Q., Zhang H., Wang W. Mid-infrared strong coupling between quasibound states in the continuum and epsilon-near-zero modes in a thin polar dielectric film. Phys. Rev. B. 2024;109:205405. doi: 10.1103/PhysRevB.109.205405. [DOI] [Google Scholar]
  • 19.Liang J., Li P., Zhou L., Guo J., Zhao Y. Near-infrared tunable multiple broadband perfect absorber base on VO2 semi-shell arrays photonic microstructure and gold reflector. Mater. Res. Express. 2018;5:015802. doi: 10.1088/2053-1591/aaa05a. [DOI] [Google Scholar]
  • 20.Zheng G.G., Zhou P., Chen Y.Y. Dynamically switchable dual-band mid-infrared absorber with phase-change material Ge2Sb2Te5. Opt. Mater. 2020;99:109581. doi: 10.1016/j.optmat.2019.109581. [DOI] [Google Scholar]
  • 21.Hajian H., Ghobadi A., Serebryannikov A.E., Butun B., Vandenbosch G.A.E., Ozbay E. VO2-hBN-graphene-based bi-functional metamaterial for mid-infrared bi-tunable asymmetric transmission and nearly perfect resonant absorption. J. Opt. Soc. Am. B. 2019;36:1607–1615. doi: 10.1364/JOSAB.36.001607. [DOI] [Google Scholar]
  • 22.Caldwell J.D., Lindsay L., Giannini V., Vurgaftman I., Reinecke T.L., Maier S.A., Glembocki O.J. Low-loss, infrared and terahertz nanophotonics using surface phonon polaritons. Nanophotonics. 2015;4:44–68. doi: 10.1515/nanoph-2014-0003. [DOI] [Google Scholar]
  • 23.Tamagnone M., Ambrosio A., Chaudhary K., Jauregui L.A., Kim P., Wilson W.L., Capasso F. Ultra-confined mid-infrared resonant phonon polaritons in van der Waals nanostructures. Sci. Adv. 2018;4:7189. doi: 10.1126/sciadv.aat7189. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 24.Abedini Dereshgi S., Folland T.G., Murthy A.A., Song X., Tanriover I., Dravid V.P., Caldwell J.D., Aydin K. Lithography-free IR polarization converters via orthogonal in-plane phonons in α-MoO3 flakes. Nat. Commun. 2020;11:5771. doi: 10.1038/s41467-020-19499-x. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 25.Zhang J., Liu H., Yang B., Hu Y., Sun Y., Wu X. Epsilon-near-zero characteristics of near-field radiative heat transfer between α-MoO3 slabs. Phys. Chem. Chem. Phys. 2023;25:1133–1138. doi: 10.1039/D2CP03641J. [DOI] [PubMed] [Google Scholar]
  • 26.Zheng Z., Xu N., Oscurato S.L., Tamagnone M., Sun F., Jiang Y., Ke Y., Chen J., Huang W., Wilson W.L., et al. A mid-infrared biaxial hyperbolic van der Waals crystal. Sci. Adv. 2019;5:8690. doi: 10.1126/sciadv.aav8690. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 27.Liu R.-T., Wu Y.-Z., Huang C.-C. Focusing of mid-infrared polaritons through patterned graphene on van der Waals crystals. Nanophotonics. 2024;13:2753–2763. doi: 10.1515/nanoph-2023-0778. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 28.Ye M., Qiang B., Zhu S., Dai M., Wang F., Luo Y., Wang Q., Wang Q.J. Nano-optical engineering of anisotropic phonon resonances in a hyperbolic α-MoO3 metamaterial. Adv. Opt. Mater. 2022;10:2102096. doi: 10.1002/adom.202102096. [DOI] [Google Scholar]
  • 29.Chen S., Wu X., Fu C. Active tuning of anisotropic phonon polaritons in natural van der Waals crystals with negative permittivity substrates and its application in energy transport. Opto-Electron. Sci. 2024;3:240002. doi: 10.29026/oes.2024.240002. [DOI] [Google Scholar]
  • 30.Wu Y., Meng L., Chen X., Liu X., Yang Q. Tunable resonant absorption emanating from in-plane hyperbolic phonon polaritons. Opt. Express. 2023;31:988. doi: 10.1364/OPTCON.483762. [DOI] [Google Scholar]
  • 31.Alvarez-Pérez G., Gonzalez-Moran A., Capote-Robayna N., Voronin K.V., Duan J., Volkov V.S., Alonso-Gonzalez P., Nikitin A.Y. Active tuning of highly anisotropic phonon polaritons in van der Waals crystal slabs by gated graphene. ACS Photonics. 2022;9:383–390. doi: 10.1021/acsphotonics.1c01549. [DOI] [Google Scholar]
  • 32.Yao Y., Kats M.A., Genevet P., Yu N., Song Y., Kong J., Capasso F. Broad electrical tuning of graphene-loaded plasmonic antennas. Nano Lett. 2013;13:1257–1264. doi: 10.1021/nl3047943. [DOI] [PubMed] [Google Scholar]
  • 33.Kats M.A., Blanchard R., Genevet P., Capasso F. Nanometre optical coatings based on strong interference effects in highly absorbing media. Nat. Mater. 2013;12:20–24. doi: 10.1038/nmat3443. [DOI] [PubMed] [Google Scholar]
  • 34.Hu Y., Wu B., Liu H., Yang B., Zhang D., Sun Y., Wu X. Near-field radiative modulator driven by anisotropic hyperbolic polaritons in biaxial hyperbolic materials. J. Quant. Spectrosc. Radiat. Transf. 2023;296:108468. doi: 10.1016/j.jqsrt.2022.108468. [DOI] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Data Availability Statement

The participants of this study did not give written consent for their data to be shared publicly, so due to the sensitive nature of the research, supporting data is not available.


Articles from Nanomaterials are provided here courtesy of Multidisciplinary Digital Publishing Institute (MDPI)

RESOURCES