Skip to main content
RSC Advances logoLink to RSC Advances
. 2026 Nov 16. Online ahead of print. doi: 10.1039/d6ra09641g

Synthesis of a three-dimensional π-conjugated framework via oxidative cross-linking of a bithienyl-functionalized metal–organic framework

Kenta Kokado a,✉, Shizuka Anan a, Yukihiro Motoyama a, Kiyonori Takahashi b, Takayoshi Nakamura b
PMCID: PMC13772001  PMID: 43041859

Abstract

Three-dimensional π-conjugated frameworks hold great promise for advanced electronic and structural materials, but their construction via direct sp2 or sp-carbon linkages remains challenging. Herein, we report the synthesis of a robust 3D π-conjugated framework through the direct oxidative cross-linking of a metal–organic framework (MOF). A novel organic ligand having bithienyl groups, a derivative of tetraarylterphenyl dicarboxylic acid (4bttpdc), was synthesized and self-assembled with Zn(ii) ions to form a non-interpenetrated IRMOF-16-type crystal (4btIR16). Subsequent oxidative polymerization via the Scholl reaction using FeCl3 successfully cross-linked the proximate bithienyl groups within the MOF pores. Unlike the highly fragile uncross-linked parent MOF, the resulting cross-linked framework (4btIR16_ox) exhibited significant structural stabilization, which enabled the preservation of micro- and mesoporosity after metal ion exclusion (BET surface area of 146.2 m2 g−1). Furthermore, the 3D π-conjugated framework demonstrated an extended effective π-conjugation length with a broadened absorption spectrum from the ultraviolet to near-infrared region, a more than five-fold increase in mechanical stiffness, and thermally activated electrical conductivity. This bottom-up methodology provides a versatile route for designing rigid, highly porous, and electronically active 3D π-conjugated frameworks.


Three-dimensional π-conjugated frameworks hold great promise for advanced electronic and structural materials, but their construction via direct sp2 or sp-carbon linkages remains challenging.graphic file with name d6ra09641g-ga.webp

Introduction

π-Conjugated polymers are fundamentally composed of carbon atoms linked by sp2 or sp hybridization, wherein the π-electrons are delocalized along the polymer chain, giving rise to distinctive electronic, optical, and structural attributes, setting them apart from conventional polymers bound by sp3 hybridized carbons. Since the 1990s, an era marked by the widespread adoption of cross-coupling reactions for carbon–carbon bond formation, there has been a burgeoning of scholarly exploration into π-conjugated polymers.1,2 In practical device applications of π-conjugated polymers, the consideration of physical properties extends beyond the characteristics of individual polymer chains; the aggregation state also assumes a pivotal role in property manipulation. Consequently, a plethora of endeavours have been documented with the aim of self-assembling π-conjugated polymers, often achieved through the delicate balance of soft-hard segments,3 hydrophilicity–hydrophobicity,4 and other factors.

In this context, metal–organic frameworks (MOFs)5,6 and covalent organic frameworks (COFs)7,8 have garnered substantial attention as methodologies for organizing π-conjugated molecules through supramolecular interactions, including coordination bonding and dynamic covalent bonding. MOFs are organometallic complex crystals with infinite periodic structures composed of rigid organic ligands and metal ions. The crystal structure can be basically tuned by various secondary building units (SBUs), which are determined by the combination of organic ligands and metal ions. COFs are crystalline organic structures obtained by incorporating dynamic covalent bonding moieties such as boroxine and triazine into the cross-linking sites of π-conjugated molecules. Various crystal structures can also be designed in COFs, but they are basically two-dimensional like graphene. It is generally difficult to form three-dimensional sp2 or sp π-conjugated framework due to the low degrees of freedom in bond length, bond angle, and dihedral angle. For example, in a MOF, the framework would be connected in three dimensions via SBUs, and the usual method to extend a two-dimensional COF to three dimensions was to embed sp3 carbon somewhere.9,10 Very recently, promising methods to form π-conjugated networks were reported for MOF11 and COF.12 However, for the MOF, the reported π-conjugated networks are connected via sulfide linkages. Therefore, a versatile methodology to form π-conjugated frameworks connected directly by sp2 or sp carbons is highly desired.

On the other hand, one application of MOFs that has been attracting attention is the formation of polymers by linking and cross-linking the organic ligands of MOFs.13 The organic ligands of MOF are arranged as crystals and have a very high regularity, and it can be said that this situation is difficult to achieve with a common solution polymerization condition. We have recently shown that the use of organic ligands in MOFs as a monomer for polymer synthesis enabled to yield network polymers with a regular polyhedral shape at any size scale.14–18 The “crystal cross-linking method” also enabled to synthesize gels that stretch only in the uniaxial direction by using anisotropic MOFs.19,20 A Monte Carlo simulation precisely predicted the polymerization behaviour in the case of linear21 and network polymer.22 However, when using the crystal cross-linking method, MOFs were formed using organic ligands modified with such as azidomethyl groups, etc., followed by post-modification reactions, thus the resulting networks contained sp3 carbons.

In this study, we synthesized a new organic ligand (4Artpdc) by introducing four aromatic rings into the central benzene ring of terphenyldicarboxylic acid (tpdc), which is commonly used as an organic ligand for MOF, and MOFs were synthesized by coexistence with metal ions such as zinc(ii) ions (Fig. 1). Furthermore, by adding an external oxidant to the obtained MOFs, the reaction of organic ligands was examined to form π-conjugated framework. We focused on the oxidative coupling, known as the Scholl reaction, to construct the robust framework. Regarding the application of the Scholl reaction within MOFs, an elegant work was recently reported where thiophene-coupling significantly enhanced electrical conductivity and photocatalytic CO2 reduction performance.23 While this approach is highly effective, our strategy focuses on the direct cross-linking of the MOF framework itself via the Scholl reaction to achieve structural stabilization.

Fig. 1. Schematic illustration of the formation of π-conjugated framework, and the chemical structure of 4Artpdc (Ar = ph, t, and bt).

Fig. 1

Experimental

Materials

Unless stated otherwise, all other reagents were obtained from commercial sources and used without further purification.

Measurements

1H (400 MHz) and 13C (100 MHz) NMR measurements were recorded on a JEOL ECX-400 instrument at Hokkaido University and a JEOL JMN-ECZ400R at Toyota Technological Institute, using 0.05% tetramethylsilane (TMS) as an internal standard. UV-vis spectra were recorded on a JASCO V-770 spectrophotometer. Fourier transform infrared (FTIR) spectra were observed with a JASCO FTIR-4100 SK spectrometer with a zinc selenide prism kit PKS-ZNSE for attenuated total reflection (ATR) technique. Thermogravimetric analysis (TGA) was conducted by RIGAKU Thermo plus TG8120 thermal analysis station with a heating rate of 10 °C per min under air. X-ray diffraction (XRD) patterns were obtained by using a Bruker D8Advance/D with Cu Kα radiation source (40 kV, 40 mA). Optical micrographs were obtained by using a Nikon instruments ECLIPSE LV100N POL stereoscopic zoom microscope. Scanning electron microscopy and energy dispersive spectroscopy was carried out by using a JEOL JSM-6360 equipment. Nitrogen adsorption measurement was conducted with a Yuasa Ionics Autosorb 6AG at −196 °C. Compression test was carried out on an isolated single particle by using a SHIMADZU MST-X micro autograph machine. Atomic force microscopy was taken with an OXFORD MFP-3D Origin. Resistivity measurements were conducted using a Keithley 6487 Picoammeter/Voltage Source by applying a DC voltage of 10 V. Gold paste was applied to two opposing faces of the sample to form electrodes, and gold wires were attached to these electrodes. The temperature was controlled using a cryostat (Axis Co., Ltd) in combination with a temperature controller (Model 331, Lake Shore Cryotronics Inc.). Electron spray ionization mass spectroscopy (ESI-MS) was carried out at Global facility centre, Hokkaido University.

X-ray crystallography analyses

Single-crystals of 4phIR16, 4tIR16, and 4btIR16 were mounted in a glass capillary with 1.0 mm diameter. The data were collected on a RIGAKU MicroMax-007HF diffractometer equipped with a Cu Kα (λ = 1.54184 Å) X-ray radiation source and a Pilatus 200 K detector. Data collection, cell refinement, and data reduction were performed using CrysalisPRO (Rigaku Oxford Diffraction 2017). The structures were determined using direct methods with SHELXT,24 and refined using full-matrix least-squares techniques on F2 with SHELXL25 compiled in the Olex2 package.26 Crystal anisotropic thermal parameters were assigned to all non-hydrogen atoms. Crystallographic data for crystals 4phIR16, 4tIR16, and 4btIR16 have been deposited at the CCDC under 2580036, 2580037, and 2580038, respectively.

General procedure for 4ArIR16

The 4Artpdc (30 µmol) was dissolved in DMF (4.5 mL). Zn(NO3)2·6H2O (27 mg, 90 µmol) was added to the solution, and the mixture was filtered through a 0.45 µm membrane filter. The filtrate was sealed in a 10 mL ampoule after freeze–pump–thaw cycle. The ampoule heated at 90 °C for 4 days. The mother liquor was decanted, and cubic crystal was repeatedly washed with fresh DMF.

Oxidative polymerization of 4ArIR16

The crystals of 4ArIR16 were repeatedly washed with fresh acetonitrile. Subsequently, a 0.1 M solution of FeCl3 in acetonitrile was added to the crystals. The mixture was allowed to stand at room temperature for 24 h, and the resulting crystals were repeatedly washed with fresh acetonitrile. To remove the metal ions and obtain the cross-linked framework (4btIR16_ox), the oxidized crystals were treated with 0.5 M H2SO4 in DMSO for 24 h. The resulting solid was washed thoroughly with DMF and CH2Cl2, and dried under vacuum at 60 °C.

Results and discussion

Synthesis and crystal structures of the MOFs

The organic ligands 4Artpdc (Ar = ph, t, bt) were synthesized by repeating Pd cross-coupling reactions, e.g., Suzuki–Miyaura coupling and Stille–Migita coupling (see SI). The MOFs were prepared by mixing these organic ligands and Zn2+ under solvothermal condition. The MOFs were obtained as cubic prisms. The powder X-ray diffraction (XRD) patterns of the obtained crystals showed that these MOFs have a similar structure with previously reported IRMOF-16,5 having non-interpenetrated structure, which was judged from the characteristic peak at 2θ = 4.0°, as well as other peaks (Fig. 2). The four bulky aromatic groups seemingly prevented the formation of interpenetrated structure of MOF, resulting in the formation of IRMOF-16 type crystal structures. Therefore, the MOFs derived from 4phtpdc (phenyl–), 4ttpdc (thienyl), and 4bttpdc (bithienyl) were named as 4phIR16, 4tIR16, and 4btIR16, respectively. After the formation of MOF crystal, νC Created by potrace 1.16, written by Peter Selinger 2001-2019 O at 1690 cm−1 in FTIR spectra bathochromically shifted to 1590 and 1390 cm−1 (Fig. S1), indicating the production of carboxylate species.

Fig. 2. (a) XRD patterns of 4phIR16, 4tIR16, 4btIR16, and 4btIR16_ox with simulated patterns of IRMOF-15 and IRMOF-16.5 (b) Crystal structures of 4phIR16, 4tIR16, and 4btIR16.

Fig. 2

Detailed crystal structures were investigated by single crystal X-ray diffraction. The obtained MOF crystals, 4phIR16, 4tIR16, and 4btIR16 have cubic crystal system, and the space group was found to be F23, F432, P23, respectively. Because of the similarity of tpdc-type organic ligands (4phtpdc, 4ttpdc, 4bttpdc), the length of one side of the cubic cage was very similar to each other (4phIR16: 21.449 Å, 4tIR16: 21.442 Å, 4btIR16: 21.418 Å). The crystal structure shows the formation of non-interpenetrated framework as also shown by XRD measurement above, probably due to the presence of four bulky aromatic groups on one organic ligand, efficiently preventing the interpenetration. In the case of 4phIR16, the distance between the centroid of the central aromatic ring of tpdc and the p-position carbon of attached phenyl ring was found to be 5.541 Å, and the angle from the one side of the framework is 58.38° (Fig. S2a). Even if two p-position carbon atoms on two adjacent organic ligands occasionally exist in the same plane, the distance between the two carbon atoms will be at least 4.386 Å, which seems too long for the formation of C–C bond between the two closest carbon atoms. In the case of 4tIR16, the distance between the centroid of the central aromatic ring of tpdc and the 5-position carbon of attached thienyl ring was found to be 5.184 Å and the angle from the one side of the framework is 59.21°, resulting in the distance between the two carbon atoms of at least 5.111 Å, which also seems too long for the formation of C–C bond between the two closest carbon atoms (Fig. S2b). However, in the case of 4btIR16, the distance between the centroid of the central aromatic ring of tpdc and the 5′-position carbon of attached thienyl ring was found to be 8.501 Å and the angle from the one side of the framework is 67.95°, therefore the distance between the two carbon atoms will be at least −0.511 Å calculated in the same way above, meaning the existence of overlap (Fig. S2c). This observation indicates the possibility of the formation of C–C bond and π-conjugated framework by the result of cross-linking. Although the structural refinement of 4btIR16 yielded a relatively high R1 value (0.1424) due to the severe disorder of the flexible bithienyl groups, the overall framework connectivity and the spatial arrangement of the ligands were unambiguously determined.

Oxidative cross-linking via the Scholl reaction

The obtained MOFs were then subjected to oxidation polymerization by using FeCl3 as the oxidant. The MOFs, 4phIR16, 4tIR16, and 4btIR16, were immersed in 0.1 M acetonitrile solution of FeCl3 for 24 h, respectively. Immediately after immersion in the oxidative condition, the MOFs were substantially coloured to brown or black, indicating the progress of reaction. It should be noted that oxidative coupling reactions using FeCl3 generally proceed via radical cation intermediates. Although the cross-linked framework is expected to be neutralized during the washing and hydrolysis steps, the presence of trace persistent radical species trapped within the solid matrix cannot be completely ruled out. After washing oxidized MOF, hydrolysis using DMSO solution of H2SO4 (0.5 M) was carried out to remove the metal cation. As a result, 4btIR16 was rapidly dissolved in a few minutes under the hydrolysis condition (Fig. 3a). On the other hand, 4btIR16_ox showed no change in the shape and the size even in the hydrolysis condition, which indicated that the polymerization successfully took place in the MOF crystal (Fig. 3b and S3). On another front, despite the dark colouring after the oxidation, 4phIR16_ox and 4tIR16_ox were rapidly dissolved in a few minutes meaning the polymerization did not successfully occur in these MOF crystals. These results indicated that the long bithienyl substituent in 4btIR16 led to the overlap of them, resulting in the effective polymerization progress, while short phenyl or thienyl substituents in 4phIR16 and 4tIR16 were difficult to react with each other due to the lack of substituent overlap. The oxidant concentration was found to be crucial for the polymerization progress, in which the use of greater than or equal to 0.1 M FeCl3 solution resulted in the formation of insoluble solid under the hydrolysis condition, while the use of 0.01 M or less FeCl3 solution resulted in dissolution of obtained solid under the hydrolysis condition. The PXRD pattern of 4btIR16_ox exhibited peak broadening compared to the original MOF 4btIR16 (Fig. 2a). Rather than simple structural degradation, this broadening reflects a combination of localized microstrain, induced by steric stress during covalent crosslinking within the pores, and a reduction in long-range crystalline domain size.

Fig. 3. Photographs along hydrolysis (a) before and (b) after the oxidation polymerization.

Fig. 3

The surface of obtained solid 4btIR16_ox and the original MOF crystal 4btIR16 were then observed by using scanning electron microscopy (SEM) and electron diffraction spectroscopy (EDS) (Fig. S4). Because of the vacuum drying and capillarity, both 4btIR16 and 4btIR16_ox showed many cracks. Before the polymerization, the surface of the crystal was uniformly smooth. The surface smooth texture was almost the same for 4btIR16_ox, after oxidation, while particle-like structure was found at the vicinity of the cracks. From the EDS analysis, sulphur atom was widely detected before and after the polymerization, which was derived from the bithienyl group in both 4btIR16 and 4btIR16_ox. On the other hand, zinc atom derived from the metal ion in MOF crystal, Zn(ii), which was detected before the polymerization, was disappeared after the polymerization, meaning that the polymerization condition, acetonitrile solution of FeCl3 damaged the SBU of the original MOF crystal, whereas the shape of the original MOF crystal was completely preserved after the polymerization. Instead of zinc atom, iron atom was detected on the surface of 4btIR16_ox after the polymerization, especially for the particle-like structure, which was probably derived from the oxidant. Furthermore, no significant chlorine signal was detected in the EDS spectrum, confirming that severe aromatic chlorination did not occur during the FeCl3-mediated oxidative coupling.

In the FTIR spectra, clear evidence for the intermolecular coupling between the bithienyl groups was obtained from the fingerprint region (Fig. S1). The pristine MOF (4btIR16) shows a distinct absorption band at 691 cm−1, which is assigned to the out-of-plane C–H bending vibration of the terminal α-position on the thiophene rings.27 Additional bands at 798 and 839 cm−1 are attributed to the thiophene β-C–H bending modes. Following oxidative cross-linking, the intensity of the terminal α-C–H bending band at 691 cm−1 markedly decreased in 4btIR16_ox, providing clear evidence for the consumption of the terminal thiophene C–H bonds via oxidative coupling. The attenuation of the β-C–H bending bands (798 and 839 cm−1) further reflects the electronic and structural perturbation caused by the extended π-conjugation and framework cross-linking. In addition, the peak attributed to free carboxylic acid at 1700 cm−1 reappeared after the reaction, indicating that the SBUs were partially affected and protonated under the acidic reaction condition. Although the emergence of new C–C stretching bands in the 1400–1500 cm−1 region is masked by the pronounced spectral rearrangements of the carboxylate groups resulting from partial SBU alteration (evidenced by the free carboxylic acid C Created by potrace 1.16, written by Peter Selinger 2001-2019 O band at 1700 cm−1), the specific attenuation of the terminal α-C–H vibration band strongly supports the formation of a cross-linked thiophene network.

Thermogravimetric analysis (TGA) was carried out under dry air (Fig. S5). Before the polymerization, 4btIR16 showed a decomposition temperature at 427 °C and a 5.1% ceramic yield after calcination at 900 °C, corresponding to the zinc content in the original MOF crystal. However, after the polymerization, the ceramic yield was 0.0%, indicating that the framework Zn2+ ions were quantitatively excluded. The residual iron species detected by EDS were below the detection limit of TGA, confirming that they exist only as trace species adsorbed on the framework surface.

Attempted solid-state 13C CP-MAS NMR and ESR measurements of 4btIR16_ox both yielded featureless, severely broadened spectra. This is attributed to trace residual high-spin Fe(iii) species (S = 5/2) trapped within the framework, whose zero-field splitting and paramagnetic relaxation enhancement (PRE) quench resolvable signals even at trace levels below bulk detection limits.

Physical and electronic properties of the cross-linked framework

To confirm the extension of π conjugation, UV-vis-NIR diffuse reflectance spectra were measured (Fig. 4a). The formation of MOF resulted in bathochromic shift of the absorption, in which the absorption edge shifted from ca. 500 nm to ca. 700 nm. After the polymerization, 4btIR16_ox showed extremely broad and featureless absorption from UV to NIR region, indicating the extension of π-conjugation, which primarily accounts for the visually observed dark color of the cross-linked framework. Furthermore, as suggested by the EDS results, trace amounts of residual iron species may also partially contribute to this darkening.

Fig. 4. (a) UV-vis-NIR diffuse reflectance spectra of 4bttpdc, 4btIR16, and 4btIR16_ox. (b) N2 adsorption/desorption isotherms of 4btIR16_ox. (c) Electronic conductivity measurement of 4btIR16_ox. (d) Photograph of single solid particle of 4btIR16_ox with gold wire for the electronic conductivity measurement.

Fig. 4

The formation of a π-conjugated framework significantly reinforced the mechanical properties compared to the original MOF crystal. Micro-compression tests performed on isolated single microparticles yielded elastic moduli of 123 MPa for 4btIR16_ox and 24 MPa for 4btIR16 (Fig. S6), demonstrating a more than 5-fold increase in stiffness upon polymerization. AFM force-curve measurements on individual microparticles confirmed a consistent elastic modulus (∼100 MPa, Fig. S7), further supporting the enhanced framework rigidity without interference from particle packing or inter-particle friction.

It is noteworthy that we attempted to measure the nitrogen adsorption isotherm of the pristine MOF 4btIR16; however, the uncross-linked framework was highly fragile and collapsed during the activation process. In stark contrast, even after the polymerization and metal ion exclusion, the obtained solid 4btIR16_ox possessed certain level of porosity unveiled by nitrogen adsorption and desorption measurement (Fig. 4b), which serves as strong evidence that the sp2 cross-linking significantly stabilized the framework structure against the activation process. The Brunauer–Emmett–Teller (BET) surface area was determined as 146.2 m2 g−1. As assumed from the degraded crystallinity revealed by XRD measurement, the pore size distribution was found to be broad, and the existence of micro- and mesopore was suggested by Barrett–Joyner–Halenda (BJH) theoretical analysis.

It should be noted that the uncross-linked 4btIR16 crystal was too fragile to withstand the physical manipulation required for attaching the electrodes, precluding the conductivity measurement of the parent MOF. In contrast, the robust nature of the cross-linked framework enabled the measurement; by using a single solid particle of 4btIR16_ox, the electronic conductivity was measured. Two gold fine wires were pasted onto the particle, and the electronic conductivity was recorded by a two probes method at various temperature (Fig. 4c and d).

As a result, 4btIR16_ox exhibited thermally activated electrical conductivity, reaching 8.95 × 10−9 S cm−1 at 27 °C. Although potential contributions from electrode contact resistance in the two-probe setup cannot be completely ruled out regarding absolute conductivity values, the well-defined thermal activation behaviour, yielding activation energies (Ea) of 0.53 eV below 77 °C and 0.32 eV above 77 °C, which reflects intrinsic charge transport within the semiconducting framework.

Conclusions

In conclusion, three organic ligands of tetraarylterphenyl dicarboxylic acid were synthesized, and MOFs were successfully prepared from these organic ligands under solvothermal condition. Then, oxidative polymerization was carried out with FeCl3, and MOF having bithienyl group provided successful polymerization and three dimensional π-conjugated framework. The obtained framework showed elongated effective π-conjugation length with broadened absorption spectra from UV to NIR region. The π-conjugated framework exhibited increase of elastic modulus, and micro- and mesoporosity, highlighting the structural stabilization achieved by the cross-linking. Additionally, the π-conjugated framework showed thermally activated electrical conductivity. Our bottom-up approach presented here will open a new route to design π-conjugated framework derived from crystal structure.

Author contributions

K. K.: conceptualization, methodology, investigation, formal analysis, writing – original draft, writing – review & editing, project administration. K. T.: formal analysis, validation. T. N.: formal analysis. Y. M.: methodology, validation. S. A.: writing – review and editing.

Conflicts of interest

There are no conflicts to declare.

Supplementary Material

RA-OLF-D6RA09641G-s001

Acknowledgments

The research reported in this publication was supported by funding from JST-PRESTO Grant Number JPMJPR19L3, and JSPS KAKENHI (Grant Number 23H02016 and 21K18991). We thank the Open Facility, Global Research Facility Alliance Centre, Office for Integrated Technical Core Hub, Hokkaido University for allowing us to conduct the analysis using NMR spectroscopy, nitrogen adsorption measurements, SEM-EDS observations, and ESI-MS, and providing insight and expertise that greatly assisted the research.

Data availability

The datasets supporting this article have been uploaded as part of the supplementary information (SI). Supplementary information: experimental section, crystallographic data in CIF, FTIR spectroscopy, distances in crystal, schematic illustration of the π-conjugated framework, SEM-EDS, TGA, compression test, AFM. See DOI: https://doi.org/10.1039/d6ra09641g.

CCDC 2580036–2580038 (4phIR16, 4tIR16, and 4btIR16) contain the supplementary crystallographic data for this paper.28a–c

Notes and references

  1. Burroughes J. H. Bradley D. D. C. Brown A. R. Marks R. N. Mackay K. Friend R. H. Burns P. L. Holmes A. B. Nature. 1990;347:539–541. doi: 10.1038/347539a0. [DOI] [Google Scholar]
  2. Friend R. H. Gymer R. W. Holmes A. B. Burroughes J. H. Marks R. N. Taliani C. Bradley D. D. C. Dos Santos D. A. Bredas J. L. Logdlund M. Salaneck W. R. Nature. 1999;397:121–128. doi: 10.1038/16393. [DOI] [Google Scholar]
  3. Park S. H. Roy A. Beaupré S. Cho S. Coates N. Moon J. S. Moses D. Leclerc M. Lee K. Heeger A. J. Nat. Photon. 2009;3:297–302. doi: 10.1038/nphoton.2009.69. [DOI] [Google Scholar]
  4. Sakai-Otsuka Y. Zaioncz S. Otsuka I. Halila S. Rannou P. Borsali R. Macromolecules. 2017;50(8):3365–3376. doi: 10.1021/acs.macromol.7b00118. [DOI] [Google Scholar]
  5. Eddaoudi M. Kim J. Rosi N. Vodak D. Wachter J. O'Keeffe M. Yaghi O. M. Science. 2002;295:469–472. doi: 10.1126/science.1067208. [DOI] [PubMed] [Google Scholar]
  6. Kitagawa S. Kitaura R. Noro S. Angew. Chem., Int. Ed. 2004;43:2334–2375. doi: 10.1002/anie.200300610. [DOI] [PubMed] [Google Scholar]
  7. Côté A. P. Benin A. I. Ockwig N. W. O'Keeffe M. Matzger A. J. Yaghi O. M. Science. 2005;310:1166–1170. doi: 10.1126/science.1120411. [DOI] [PubMed] [Google Scholar]
  8. Jiang J.-X. Su F. Wood C. D. Campbell N. L. Niu H. Dickinson C. Ganin A. Y. Rosseinsky M. J. Khimyak Y. Z. Cooper A. I. Angew. Chem., Int. Ed. 2007;46:8574–8578. doi: 10.1002/anie.200701595. [DOI] [PubMed] [Google Scholar]
  9. Uribe-Romo F. J. Hunt J. R. Furukawa H. Klöck C. O'Keeffe M. Yaghi O. M. J. Am. Chem. Soc. 2009;131(13):4570–4571. doi: 10.1021/ja8096256. [DOI] [PubMed] [Google Scholar]
  10. Ben T. Ren H. Ma S. Cao D. Lan J. Jing X. Wang W. Xu J. Deng F. Simmons J. M. Qiu S. Zhu G. Angew. Chem., Int. Ed. 2009;48:9457–9460. doi: 10.1002/anie.200904637. [DOI] [PubMed] [Google Scholar]
  11. Zhou H.-Q. He Y. Hu J. Y. Chung L.-H. Gu Q. Liao W.-M. Zeller M. Xu X. He J. Chem. Commun. 2021;57:187–190. doi: 10.1039/D0CC06765B. [DOI] [PubMed] [Google Scholar]
  12. Wang S. Li X.-X. Da L. Wang Y. Xiang Z. Wang W. Zhang Y.-B. Cao D. J. Am. Chem. Soc. 2021;143:15562–15566. doi: 10.1021/jacs.1c06986. [DOI] [PubMed] [Google Scholar]
  13. Kokado K. Polym. J. 2017;49:345–353. doi: 10.1038/pj.2016.122. [DOI] [Google Scholar]
  14. Furukawa Y. Ishiwata T. Sugikawa K. Kokado K. Sada K. Angew. Chem., Int. Ed. 2012;51:10566–10569. doi: 10.1002/anie.201204919. [DOI] [PubMed] [Google Scholar]
  15. Ishiwata T. Furukawa Y. Sugikawa K. Kokado K. Sada K. J. Am. Chem. Soc. 2013;135:5427–5432. doi: 10.1021/ja3125614. [DOI] [PubMed] [Google Scholar]
  16. Distefano G. Suzuki H. Tsujimoto M. Isoda S. Bracco S. Comotti A. Sozzani P. Uemura T. Kitagawa S. Nat. Chem. 2013;5:335–341. doi: 10.1038/nchem.1576. [DOI] [PubMed] [Google Scholar]
  17. Allen C. A. Boissonnault J. A. Cirera J. Gulland R. Paesania F. Cohen S. M. Chem. Commun. 2013;49:3200–3202. doi: 10.1039/C3CC40635K. [DOI] [PubMed] [Google Scholar]
  18. Ishiwata T. Michibata A. Kokado K. Ferlay S. Hosseini M. W. Sada K. Chem. Commun. 2018;54:1437–1440. doi: 10.1039/C7CC07158B. [DOI] [PubMed] [Google Scholar]
  19. Ishiwata T. Kokado K. Sada K. Angew. Chem., Int. Ed. 2017;56:2608–2612. doi: 10.1002/anie.201611338. [DOI] [PubMed] [Google Scholar]
  20. Kokado K. Ishiwata T. Anan S. Sada K. Polym. J. 2017;49:685–689. doi: 10.1038/pj.2017.32. [DOI] [Google Scholar]
  21. Anan S. Mochizuki Y. Kokado K. Sada K. Angew. Chem., Int. Ed. 2019;58:8018–8023. doi: 10.1002/anie.201901308. [DOI] [PubMed] [Google Scholar]
  22. Anan S. Kokado K. Sada K. Macromol. Rapid Commun. 2024;45:2400058. doi: 10.1002/marc.202400058. [DOI] [PubMed] [Google Scholar]
  23. Li N. Lai G.-Q. Chung L.-H. Yu F. He J. Lan Y.-Q. CCS Chem. 2024;6:1211–1221. doi: 10.31635/ccschem.023.202303055. [DOI] [Google Scholar]
  24. Sheldrick G. M. Acta Crystallogr., Sect. A:Found. Adv. 2015;71:3–8. doi: 10.1107/S2053273314026370. [DOI] [PMC free article] [PubMed] [Google Scholar]
  25. Sheldrick G. M. Acta Crystallogr., Sect. C: Struct. Chem. 2015;71:3–8. doi: 10.1107/S2053229614024218. [DOI] [PMC free article] [PubMed] [Google Scholar]
  26. Dolomanov O. V. J. Appl. Crystallogr. 2009;42:339. doi: 10.1107/S0021889808042726. [DOI] [Google Scholar]
  27. Palma-Cando A. Macromolecules. 2015;48:6816–6824. doi: 10.1021/acs.macromol.5b01821. [DOI] [Google Scholar]
  28. (a) CCDC 2580036: Experimental Crystal Structure Determination, 2026, 10.5517/ccdc.csd.cc2slqz3 [DOI]; (b) CCDC 2580037: Experimental Crystal Structure Determination, 2026, 10.5517/ccdc.csd.cc2slr05 [DOI]; (c) CCDC 2580038: Experimental Crystal Structure Determination, 2026, 10.5517/ccdc.csd.cc2slr16 [DOI]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Data Citations

  1. (a) CCDC 2580036: Experimental Crystal Structure Determination, 2026, 10.5517/ccdc.csd.cc2slqz3 [DOI]
  2. (b) CCDC 2580037: Experimental Crystal Structure Determination, 2026, 10.5517/ccdc.csd.cc2slr05 [DOI]
  3. (c) CCDC 2580038: Experimental Crystal Structure Determination, 2026, 10.5517/ccdc.csd.cc2slr16 [DOI]

Supplementary Materials

RA-OLF-D6RA09641G-s001

Data Availability Statement

The datasets supporting this article have been uploaded as part of the supplementary information (SI). Supplementary information: experimental section, crystallographic data in CIF, FTIR spectroscopy, distances in crystal, schematic illustration of the π-conjugated framework, SEM-EDS, TGA, compression test, AFM. See DOI: https://doi.org/10.1039/d6ra09641g.

CCDC 2580036–2580038 (4phIR16, 4tIR16, and 4btIR16) contain the supplementary crystallographic data for this paper.28a–c


Articles from RSC Advances are provided here courtesy of Royal Society of Chemistry

RESOURCES