Skip to main content
Applied and Environmental Microbiology logoLink to Applied and Environmental Microbiology
. 2026 Oct 14;92(11):e01467-26. doi: 10.1128/aem.01467-26

Structural and catalytic characterization of the 2,5-dihydroxypyridine ring-cleaving dioxygenase Hpo from Pseudomonas putida S16

Zhenyu Cheng 1, Xu Han 2, Hongli Wei 2, Haiyang Hu 1,✉, Ping Xu 1, Weidong Liu 2,3,✉, Hongzhi Tang 1,✉
Editor: Gemma Reguera4
PMCID: PMC13780321  PMID: 42873482

ABSTRACT

2,5-Dihydroxypyridine (2,5-DHP) is a potentially carcinogenic intermediate in pyridine catabolism. Hpo, a non-heme Fe(II)-dependent dioxygenase from Pseudomonas putida S16, catalyzes ring cleavage of 2,5-DHP, yet its structure has remained uncharacterized. We determined the crystal structure of Hpo at 2.56 Å resolution, revealing a catalytic Fe center coordinated by His257, His310, and Asp312 in a conserved 2-His-1-carboxylate motif, with Ser294 positioned directly below the iron and essential for iron binding. The substrate-binding pocket, formed primarily by Phe94, Phe97, Phe186, Phe188, and Arg285, incorporates potential hydrogen-bonding interactions from Glu169 and His181. Hpo employs a distinctive Phe94-Leu95-Leu96-Phe97 motif for substrate recognition, contrasting with the Met102-Leu103-Leu104-His105 motif in the isoenzyme NicX. Molecular dynamics simulations spanning 200 ns demonstrated that Phe94 and Phe97 mutations destabilized substrate binding, confirming their role in substrate recognition, and explaining the corresponding loss of catalytic activity. These findings reveal the active-site architecture and substrate engagement mechanism of Hpo, advancing our understanding of pyridine ring-cleaving non-heme Fe(II)-dependent dioxygenases.

IMPORTANCE

Pyridine compounds are common environmental contaminants that pose risks to human health. The microbial degradation of pyridine compounds generates toxic intermediates, including 2,5-dihydroxypyridine (2,5-DHP), which require enzymatic detoxification. Prior to this study, only one 2,5-DHP dioxygenase had been structurally characterized, leaving the structural basis of this rare enzyme subgroup unresolved. By determining the Hpo crystal structure and identifying residues critical for iron coordination and catalysis, this work addresses a significant knowledge gap and establishes a structural framework for understanding pyridine ring-cleaving non-heme Fe(II)-dependent dioxygenases and may also provide an enzymatic perspective on the removal of pyridine contaminants from the environment.

KEYWORDS: 2,5-dihydroxypyridine; non-heme Fe(II) enzyme; crystal structure

INTRODUCTION

Pyridines and related compounds originate from industrial synthesis, pharmaceutical manufacture, and alkaloid metabolism (1), making them widespread environmental contaminants. They are frequently detected in industrial effluents, with pyridine concentrations ranging from 20 to 300 mg/L and reaching 600–1,000 mg/L during emergency spills (2). As potential carcinogenic substances, their high water solubility and mobility drive rapid dispersal and sustained human exposure, thereby increasing the risk of adverse effects on the liver, kidney, immune system, and reproductive function, and raising public concerns (3, 4). 2,5-Dihydroxypyridine (2,5-DHP) represents one such pyridine derivative and a potentially genotoxic intermediate in the nicotine degradation pathway (5).

This compound was identified from nicotine and nicotinic acid degradation in Pseudomonas putida S16 and Pseudomonas putida KT2440 (5–9). Ring cleavage of 2,5-DHP through oxidative mechanisms removes aromaticity and commits the molecule toward assimilation, a transformation typically catalyzed by non-heme Fe(II)-dependent enzymes (8, 9). Although the non-heme Fe(II) superfamily encompasses diverse subgroups, including extradiol ring-cleaving catechol dioxygenases, Rieske dioxygenases, α-ketoglutarate-dependent dioxygenases, cysteine dioxygenases, and pterin-dependent hydroxylases (10–14), enzymes catalyzing pyridine ring oxidation remain poorly characterized.

Hpo, the 2,5-DHP dioxygenase from Pseudomonas putida S16, catalyzes oxidative cleavage of 2,5-DHP to N-formylmaleamic acid (NFM), a central step in nicotine degradation. Biochemical characterization established Hpo as a highly specific, non-heme Fe(II)-dependent dioxygenase; Tang et al. determined kinetic parameters of Km = 0.168 mM and kcat ≈ 11 s−1 (8), while subsequent work by Yao et al. confirmed 1:1 iron stoichiometry and demonstrated via 18O-labeling that both oxygen atoms in NFM derive from O2 (15). Despite these mechanistic advances, the three-dimensional structure of Hpo remained unknown for over a decade, limiting deeper mechanistic understanding.

Structural insight emerged from NicX, the closest phylogenetic homolog, which catalyzes the identical reaction (9, 14). Cocrystal structures of NicX revealed an unusual octahedral iron center where the canonical 2-His-1-carboxylate motif (16–18) is augmented by Ser302 and two coordinated water molecules. Notably, substrate binding occurs in a non-chelating mode without direct iron coordination (19). These structural observations prompted mechanistic proposals , including a novel dioxetane-mediated pathway (8, 9, 17, 18, 20). However, such insights remain restricted to NicX and have not been extended to Hpo, whose structure remained uncharacterized. This gap underscores the limited understanding of pyridine ring-cleaving non-heme Fe(II)-dependent dioxygenases broadly.

We report the Hpo crystal structure determined at 2.56 Å resolution, identifying residues essential for iron coordination and substrate binding through site-directed mutagenesis and computational analysis. Hpo employs a distinctive Phe94-Leu95-Leu96-Phe97 motif governing substrate recognition, markedly different from the corresponding Met102-Leu103-Leu104-His105 motif in NicX. These findings establish the first detailed structural characterization of Hpo, provide a mechanistic foundation for understanding pyridine ring-cleaving non-heme Fe(II)-dependent dioxygenases, and offer a basis for addressing the challenge of removing nitrogen-containing heterocyclic contaminants.

RESULTS

Phylogenetic analysis and overall structure of Hpo

Phylogenetic analysis positioned Hpo within the non-heme Fe(II)-dependent dioxygenase superfamily (Fig. 1A). Hpo clustered closely with NicX from Pseudomonas putida KT2440, a known 2,5-DHP dioxygenase, forming a distinct clade separate from extradiol ring-cleaving catechol dioxygenases and Rieske dioxygenases. In contrast to canonical extradiol dioxygenases, which target catechol-containing substrates, the Hpo/NicX branch catalyzes oxidative ring opening of the nitrogen-containing heterocycle 2,5-DHP to N-formylmaleamic acid, establishing these enzymes as a specialized subgroup dedicated to pyridine heterocycle degradation.

Fig 1.

Phylogenetic tree places Hpo among extradiol and Rieske dioxygenases, with reaction schemes shown. Ribbon diagrams reveal a homohexameric assembly and labeled monomer topology with a catalytic iron atom.

Phylogenetic relationships and macromolecular architecture of Hpo. (A) Maximum likelihood phylogenetic tree of representative non-heme Fe(II)-dependent dioxygenases, focusing on extradiol-cleaving catechol dioxygenases and Rieske-type dioxygenases. Hpo from Pseudomonas putida S16 and NicX from Pseudomonas putida KT2440 are highlighted in orange and blue, respectively. Sequences are annotated by their Protein Data Bank (PDB) identifiers or UniProt accession numbers. (B) Ribbon representation of the homohexameric Hpo assembly within the asymmetric unit, with individual monomers color-coded. Catalytic iron atoms are rendered as orange spheres. (C) Structural topology of an Hpo monomer. ⍺-helices, β-strands, and loops are colored orange, blue, and gray, respectively, with secondary structural elements explicitly labeled.

We determined the recombinant Hpo crystal structure at 2.56 Å resolution (Fig. 1B; Table S1). The protein adopts a compact α/β fold (Fig. 1C), with the N-terminal domain (residues 1–125) comprising four α/β units (α1-β1, α2-β2, α4-β3, and α5-β4) and the C-terminal domain (residues 126–341) containing two antiparallel β-sheets (β19-β18-β5-β6-β10-β13-β14 and β7-β9-β15-β16-β17-β11-β12).

Iron-binding site and metal coordination

Strong electron density in the protein interior corresponded to the catalytic iron center, consistent with Hpo’s known iron dependence. The iron localizes to the base of a shielded cavity lined by antiparallel β-sheets. Analysis of the electron density revealed direct coordination by His257, His310, and Asp312, consistent with the conserved 2-His-1-carboxylate motif, a recurrent iron-binding scaffold among many mononuclear non-heme Fe(II)-dependent oxygenases (Fig. 2A). In NicX, this motif is further supplemented by Ser302 as an auxiliary coordination ligand essential for catalysis. The corresponding residue in Hpo is Ser294, which orients toward the binding pocket but remains distant from iron, with an average Ser294OG–Fe distance of 5.17 ± 0.47 Å across the six crystallographic molecules in the apo structure. Nevertheless, S294A mutagenesis abolished activity (Fig. 2B), and ICP-MS confirmed loss of iron binding (Table S2), indicating that, despite its non-coordinating orientation in the apo state, Ser294 is catalytically essential. Alanine substitution of the other metal-coordinating residues similarly eliminated activity (Fig. 2B), confirming the integrity of the 2-His-1-carboxylate motif.

Fig 2.

Bar chart and structural model showing WT Hpo has near 100% relative activity, while H257A, S294A, H310A, and D312A variants show abolished activity. Inset line graph confirms substrate depletion only in WT.

Coordination geometry of the Hpo catalytic iron center and mutational analysis. (A) Stereoview of the active-site iron-binding pocket. The coordinating environment is overlaid with a blue mesh representing the 2FO-FC electron density map, contoured at 1σ. (B) Relative enzymatic activities of wild-type Hpo alongside the H257A, S294A, H310A, and D312A variants. The inset displays the representative time-course traces of substrate depletion monitored via absorbance at 320 nm. Data points represent the mean of three independent biological replicates.

Substrate-binding pocket and residue identification

The apo structure guided identification of the substrate-binding pocket and tunnels by computational analysis (CAVER 3.0 [21] and PrankWeb [22]; Fig. 3A) and molecular docking of 2,5-DHP. The highest-scoring docks consistently positioned 2,5-DHP in the same cavity; candidate docking poses were selected based on their compatibility with the local chemical environment, including hydrophobic contacts, a potential hydrogen-bonding network, together with their agreement with the substrate binding pose observed in the NicX complex structure (Fig. S1). In the final pose, 2,5-DHP pyridine ring occupies a hydrophobic pocket lined by Phe94, Phe97, Phe186, and Phe188 at the entrance, with Arg285 forming the base. Hydrogen bonding was predicted between the substrate’s 2-hydroxyl group and Glu169 (OE1, 3.1 Å; OE2, 3.0 Å) and His181 (ND1, 3.1 Å) (Fig. 3A).

Fig 3.

Molecular visualization of the Hpo substrate binding pocket with 2,5-DHP and residues Phe94, Phe97, His181, Glu169, Phe186, Phe188, and Arg285, paired with a bar chart showing near-zero relative activity for all mutants versus wild type.

Architecture of the substrate-binding pocket and functional evaluation of key residues. (A) Detailed view of the Hpo active site accommodating 2,5-dihydroxypyridine. The left panel shows the predicted substrate-binding pocket (green surface) and putative access tunnel (black line). Surrounding contact residues are labeled, and hydrogen-bonding networks are depicted as dashed lines in the right panel. (B) Relative catalytic efficiencies of wild-type Hpo and targeted active-site mutants. Individual data points from three independent experimental replicates are shown as dots.

To assess the functional importance of these predicted substrate-binding residues, we generated alanine substitutions at Glu169, His181, Arg285, and all four phenylalanines. All mutations substantially impaired activity. To further examine phenylalanine positions, we introduced conservative substitutions (Trp, Met, and Leu). Both positions were strictly intolerant to substitution; only F188W retained significant activity (42.69%) (Fig. 3B). These findings establish that the defined hydrophobic environment is essential for catalytic activity.

Structural divergence between Hpo and NicX

Despite phylogenetic proximity and structural similarity (RMSD = 0.764), Hpo and NicX showed divergent substrate-binding architecture (23) (Fig. 4A through C; Fig. S2). In NicX, His105 promotes catalysis via proton transfer and, with Leu104, undergoes conformational changes that position the substrate optimally. Hpo contains a strictly hydrophobic motif (Phe94-Leu95-Leu96-Phe97) at this position, preventing polar protein-substrate interactions.

Fig 4.

Structural superposition of Hpo and NicX shows RMSD of 0.764, with active-site motifs F94-L95-L96-F97 versus M102-L103-L104-H105. Bar chart shows F97Y retains full activity while all other variants lose activity.

Structural alignments, sequence conservation, and mutagenesis of Hpo and NicX. (A) Three-dimensional structural superposition of Hpo (green) and its homolog NicX (magenta; PDB: 7CUP). (B and C) Magnified views highlighting the distinct active-site configurations, focusing on the F94-L95-L96-F97 motif of Hpo (B) and the corresponding M102-L103-L104-H105 motif of NicX (C). (D) Sequence alignment illustrating the conservation of the F94–F97 motif alongside essential iron-coordinating and substrate-binding residues. Residue numbering in the sequence logo is based on Hpo. (E) Relative activities of wild-type Hpo and engineered variants. Assays were conducted in triplicate (individual replicates shown as dots), with the insets tracking the kinetics of substrate consumption at 320 nm.

Conservation analysis demonstrated that metal-coordinating and substrate-binding residues are highly conserved across this enzyme class (Fig. 4D). The Phe94-Leu95-Leu96-Phe97 motif showed variable conservation; Phe94 was less conserved, while Leu95 and Leu96 remained predominantly leucine, and position 97 was occupied by His, Phe, or Tyr. We examined Phe94 and Phe97 specificity through substitution with polar residues (His, Tyr, Asp, Ser, and Thr) or bulkier hydrophobes (Trp, Met, and Leu). Nearly all substitutions abolished activity except F97Y, which retained wild-type levels (Fig. 4E). This mutational sensitivity reveals that both Phe94 and Phe97 are strictly required for activity.

Molecular dynamics (MD) simulations

We conducted 200 ns molecular dynamics simulations of Hpo-2,5-DHP to assess binding stability (Fig. S4). Protein RMSD stabilized rapidly and remained constant throughout (Fig. 5A), while ligand RMSD stayed low, confirming stable binding (Fig. 5B). The protein core remained rigid while loops (residues 60–70 and 270–280) showed increased flexibility. Hydrogen-bonding interactions persisted throughout the trajectory (Fig. S3). Since C1 of 2,5-DHP is the presumed cleavage site, we monitored Fe-C1 distance to evaluate substrate positioning (Fig. 5C). Wild-type Hpo maintained a stable Fe-C1 distance and productive substrate geometry. In contrast, F94A, F94H, and F97A showed increased Fe-C1 distances with substrate dissociation at multiple time points. F97H retained substrate in the pocket but with an elevated and variable Fe-C1 distance (Fig. 5D). These results demonstrate that Phe94 and Phe97 mutations destabilize substrate binding and explain the corresponding loss of activity.

Fig 5.

Line graphs show Hpo RMSD stabilizing near 2 angstroms and 2,5-DHP ligand RMSD near 0.13 angstroms over 200 ns. Distance d1 between C1 and Fe remains stable in WT but increases in F94A, F94H, F97A, and F97H mutants.

Molecular dynamics simulations of wild-type and mutant Hpo complexes. (A) Root-mean-square deviation (RMSD) profiles of Hpo C⍺ backbones during a 200 ns production trajectory. (B) Independent RMSD tracking of the bound 2,5-DHP ligand over the same timeline. (C) Structural schematic defining the monitored interatomic distance (d1) between the C1 atom of 2,5-DHP and the catalytic iron center. (D) Time evolution of the d1 trajectory for wild-type Hpo and select variants (F94A, F94H, F97A, and F97H), paired with their corresponding probability distribution frequencies in the right panel.

Since F97Y was the only substitution that retained appreciable activity, we additionally performed a 200 ns simulation of the F97Y mutant (Fig. S5). Superposition of 100 snapshots extracted from the equilibrated 100–200 ns portions of the trajectories showed that Phe97 in WT predominantly adopted an edge-to-face orientation relative to the aromatic ring of 2,5-DHP, whereas Tyr97 in F97Y displayed a more parallel and offset arrangement (Fig. S6). This alternative, parallel aromatic interaction helps stabilize 2,5-DHP within the binding pocket and maintain a catalytically relevant substrate pose.

DISCUSSION

Pyridine ring-cleaving enzymes constitute a rare subset of the non-heme Fe(II)-dependent dioxygenase superfamily. Phylogenetic analysis established that Hpo and NicX form a distinct clade, clearly separated from canonical extradiol ring-cleaving catechol dioxygenases and Rieske dioxygenases, with shared sequence identity (40%) and catalytic specialization for 2,5-DHP conversion to N-formylmaleamic acid (Fig. 1B). Both enzymes target pyridine-derived substrates lacking catechol functionality, distinguishing them from classical extradiol dioxygenases. While NicX has been mechanistically well-characterized, Hpo remained structurally unknown, and this work provides the first atomic-level insight into this specialized enzyme class.

The Hpo crystal structure revealed the conserved 2-His-1-carboxylate motif (His257, His310, and Asp312) characteristic of NicX. Notably, NicX contains an auxiliary serine ligand (Ser302) at the iron center—an unusual feature among non-heme iron-dependent dioxygenases. The structurally equivalent Ser294 in Hpo adopts a non-coordinating geometry in the apo structure and remains distant from iron. However, S294A mutagenesis abolished catalytic activity, and ICP-MS analysis demonstrated loss of iron binding, establishing that Ser294 is essential despite its non-coordinating position in the resting state. This apparent paradox may instead suggest an indirect role of Ser294 in stabilizing the catalytic machinery during turnover. Despite extensive efforts, attempts to obtain a cocrystal structure of Hpo were unsuccessful.

Beyond metal coordination, structural, mutagenic, and computational analyses revealed a highly selective substrate-binding pocket centered on a hydrophobic environment formed by Phe94, Phe97, Phe186, Phe188, and Arg285. The 2-hydroxyl of 2,5-DHP participates in hydrogen bonding with Glu169 and His181. This precisely calibrated pocket—combining hydrophobic packing with appropriately positioned polar interactions—restricts substrate specificity. Strikingly, related pyridine isomers, including 2-hydroxypyridine, 3-hydroxypyridine, 4-hydroxypyridine, 2,3-dihydroxypyridine, 2,4-dihydroxypyridine, and 2,6-dihydroxypyridine, showed no detectable activity (Table S3), demonstrating that Hpo achieves selectivity through precise steric and electronic complementarity rather than promiscuous tolerance of chemical analogs.

Intriguingly, NicX relies on His105 to form a hydrogen bond with 2,5-DHP, thereby guiding the substrate into a non-chelating binding pose and contributing to substrate specificity. By contrast, Hpo maintains equally stringent selectivity without a structurally analogous histidine. This finding indicates that alternative local architectures can confer substrate discrimination. Mutagenesis of Phe94 and Phe97 to polar residues (His, Asp, Ser, and Thr) generally proved intolerable; only F97Y retained wild-type activity, likely because tyrosine preserves aromatic character and spatial demands with minimal local perturbation. Molecular dynamics simulations confirmed that all four variants (F94A, F94H, F97A, and F97H) destabilized substrate positioning within the pocket. The distinct recognition modes of Hpo and NicX converge on the same functional outcome, revealing structural plasticity in the substrate-recognition region and highlighting them as hotspots for tuning substrate specificity. However, the precise mechanistic basis underlying Hpo’s specificity in the absence of His-mediated recognition remains incompletely understood. Direct structural characterization of the substrate-bound state would elucidate how this pocket geometry selectively accommodates 2,5-DHP and supports efficient catalysis.

This study provides the first structural characterization of Hpo and establishes a mechanistic framework for understanding pyridine ring-cleaving non-heme Fe(II)-dependent dioxygenases. Hpo employs a conserved 2-His-1-carboxylate iron-binding motif supplemented by substrate-activated Ser294 coordination, coupled with a highly selective binding pocket that discriminates among pyridine regioisomers through integrated hydrophobic and polar interactions. These findings advance molecular understanding of this rare enzyme class and illuminate principles governing substrate specificity in pyridine degradation pathways.

MATERIALS AND METHODS

Materials and strains

2-hydroxypyridine, 3-hydroxypyridine, 4-hydroxypyridine, 2,3-dihydroxypyridine, 2,4-dihydroxypyridine, 2,5-dihydroxypyridine, and 2,6-dihydroxypyridine were purchased from Macklin (China). Escherichia coli DH5α (Tsingke Biotechnology, China) served as the cloning host, and E. coli BL21(DE3) (Sangon Biotech, China) was utilized for recombinant protein overexpression. E. coli strains were cultured at 37°C in lysogeny broth (LB) medium supplemented with appropriate antibiotics.

Phylogenetic analysis

Phylogenetic analysis of Hpo was performed using its amino acid sequence. A multiple sequence alignment was generated via MAFFT, and a maximum likelihood (ML) phylogenetic tree was constructed using IQ-TREE with the parameters −m MFP −B 1000 −alrt 1000.

Gene cloning and site-directed mutagenesis

The hpo gene encoding 2,5-dihydroxypyridine dioxygenase was PCR-amplified from the Pseudomonas putida S16 genome using Phanta Flash Master DNA Polymerase (Vazyme Biotech Co., Ltd, China) and cloned into pET-24a(+). The resulting recombinant plasmid served as the template for site-directed mutagenesis, which was conducted as previously described. PCR products were digested with Dpn I and transformed into E. coli DH5α. Transformants were selected on LB agar containing 50 μg/mL kanamycin.

Protein expression and purification

Plasmids encoding wild-type or mutant Hpo were transformed into E. coli BL21(DE3). Transformants were grown at 37°C in LB medium containing 50 μg/mL kanamycin until the optical density at 600 nm reached 0.6–0.8. Protein expression was induced with 0.3 mM isopropyl-β-d-thiogalactopyranoside (IPTG) at 16°C for at least 18 h. Cells were harvested, resuspended in lysis buffer (25 mM Tris-HCl, 300 mM NaCl, pH 8.0), and disrupted under high pressure (800–1,000 bar). Recombinant Hpo proteins were purified via Ni2+-nitrilotriacetic acid (Ni-NTA) affinity chromatography (Sangon Biotech). Eluted proteins were concentrated and buffer-exchanged into reaction buffer (25 mM Tris-HCl, pH 8.0) using ultrafiltration. Purified proteins were analyzed by SDS-PAGE, and concentrations were determined by absorbance at 280 nm.

For crystallography, the E. coli BL21(DE3) carrying pET28a-HPO was cultivated in auto-induction medium at 37°C for 6 h, followed by an additional 48 h at 16°C. Cells were harvested by centrifugation (5,000 × g, 15 min), resuspended in crystallographic lysis buffer (25 mM Tris-HCl, pH 7.5, 150 mM NaCl, and 20 mM imidazole), and disrupted using a French Press. Cell debris was removed by centrifugation (17,000 × g, 1 h). The supernatant was loaded onto a Ni-NTA column using an FPLC System (GE Healthcare), and the target protein was eluted with a linear imidazole gradient (20–250 mM), peaking at approximately 100 mM imidazole. Concentrated eluates were further purified on a HiLoad 16/600 Superdex 200 size-exclusion column (GE Healthcare). Final protein purity (>95%) was verified via SDS-PAGE. To optimize crystal resolution, the purified protein was digested with subtilisin and concentrated to 12 mg/mL for crystallization screening.

Crystallization, data collection, processing, and refinement

Crystallization screening was performed at 25°C using the sitting-drop vapor-diffusion method in 48-well Cryschem plates. Drops consisting of 1 μL Hpo solution (12 mg/mL in 25 mM Tris-HCl, pH 7.5, and 150 mM NaCl) and 1 μL reservoir solution were equilibrated against 100 μL reservoir solution. Optimized Hpo crystals were obtained within 7–10 days in a condition consisting of 10% PEG 8000, 10% 1,5-pentanediol, 0.05 M Bis-Tris (pH 6.5), 0.05 M MOPSO, and 0.1 M Monosaccharides II (0.02 M each of xylitol, myo-inositol, d-(-)-fructose, l-rhamnose monohydrate, and d-sorbitol).

X-ray diffraction data were collected using an in-house Rigaku FRX source and beamlines BL17B, BL17U, BL18U1, BL19U1, and BL10U2 at the National Facility for Protein Science in Shanghai (NFPS), Shanghai Synchrotron Radiation Facility. Prior to data collection at 100 K, crystals were mounted in cryoloops and briefly soaked in a cryoprotectant solution containing the reservoir matrix supplemented with 20% glycerol. Diffraction images were integrated and scaled using HKL2000 (24). The Hpo structure was solved by molecular replacement with Phaser (25) from the CCP4 suite (26), using the esterase oxidoreductase structure from Pseudomonas putida KT2440https://www.rcsb.org/search?q=rcsb_entity_source_organism.taxonomy_lineage.name:Pseudomonas%20putida%20KT2440 (PDB code: 7CN3) as the search model. Iterative structural refinement was performed using Refmac5 (27) and Coot (28). A randomly selected 5% of the reflections were set aside as a test set to monitor Rfree (29) during refinement. Data collection and refinement statistics are summarized in Table S3. Structural figures were generated using PyMOL.

Enzyme assays and analytic methods

Hpo activity was quantified by monitoring the consumption of 2,5-dihydroxypyridine at 320 nm using a SPECORD 210 PLUS UV-visible spectrophotometer (Analytik Jena, Germany) (30). Purified Hpo was preincubated with FeCl2 on ice for 10 min prior to the assay. Standard 800 μL reaction mixtures contained 37.5 μg/mL 2,5-dihydroxypyridine, 0.025 mM Fe2+, 25 mM Tris-HCl (pH 8.0), and 0.01 mg/mL enzyme. Reactions were maintained at 25°C, and absorbance decreases were continuously recorded to calculate activity using an extinction coefficient of 5,200 M−1 cm−1 (7). Substrate specificity toward the various mono- and dihydroxypyridines was evaluated via high-performance liquid chromatography (HPLC). Analytes were separated on a Waters XBridge C18 column at a flow rate of 0.2 mL/min using a mobile phase of methanol and 0.1% aqueous formic acid (80:20, vol/vol).

Structure preparation and molecular docking

The experimental Hpo crystal structure served as the initial computational model. Missing loops were reconstructed using RosettaRemodel (31), and amino acid protonation states at pH 8.0 were assigned using the H ++ bioinformatic server (32) at pH 8.0. Ligand binding modalities were predicted via AutoDock Vina (33, 34). The catalytic iron center was parameterized with the ff14SB force field (35) using MCPB.py (36) within AmberTools (37). Final system topologies were converted to GROMACS format using ParmEd (38), and ligand topologies were generated with Sobtop (39).

Molecular dynamics simulation

The docked protein-ligand complexes served as starting configurations for molecular dynamics (MD) simulations, which were performed in GROMACS 2025 (40) using the ff14SB force field. Systems were centered in a cubic box with a minimum edge clearance of 0.8 nm, solvated with TIP3P water molecules (41), and neutralized with counterions. Energy minimization was performed via the steepest descent algorithm for 20,000 steps or until the maximum force fell below 5 kJ mol−1. Systems were equilibrated under NPT conditions at 298.15 K and 1 bar for 200 ps. During equilibration, position restraints were applied to the ligand with a force constant of 1,000 kJ mol−1 nm−2. Temperature and pressure were regulated using the V-rescale thermostat (42) and Parrinello-Rahman barostat (43), respectively. Covalent bonds involving hydrogen atoms were constrained using the LINCS algorithm (44), and long-range electrostatic interactions were computed via the Particle Mesh Ewald (PME) method (45). Production MD trajectories were subsequently collected for 200 ns under identical thermodynamic conditions. Mutant models were engineered from the wild-type framework using PyMOL (46) and subjected to the same simulation pipeline. Trajectory analyses, including root-mean-square deviation (RMSD), root-mean-square fluctuation (RMSF), hydrogen bonding networks, and critical interatomic distances, were performed using standard GROMACS utilities (gmx rms, gmx rmsf, gmx hbond, and gmx distance). PyMOL was used for structural visualization and figure preparation.

ACKNOWLEDGMENTS

We thank the staffs from BL02U1/BL18U1/BL19U1/BL10U2 beamline of the National Facility for Protein Science in Shanghai (NFPS) at Shanghai Synchrotron Radiation Facility, for assistance during data collection.

This study was supported by the National Key Research and Development Program of China (2024YFA0919000), the National Science Fund for Distinguished Young Scholars of China (32525009), the National Natural Science Foundation of China (32370106), the Shanghai Municipal Science and Technology Major Project, Project of State Key Laboratory of Microbial Metabolism, Shanghai Jiao Tong University (China) (SKLMMZD_07), and the Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China (JYB2025XDXM906).

Conceptualization: Hongzhi Tang and Zhenyu Cheng. Methodology: Zhenyu Cheng, Xu Han, and Hongli Wei. Investigation: Zhenyu Cheng, Haiyang Hu, and Hongzhi Tang. Visualization: Zhenyu Cheng. Funding acquisition: Hongzhi Tang and Haiyang Hu. Project administration: Hongzhi Tang and Haiyang Hu. Supervision: Hongzhi Tang. Writing—original draft: Zhenyu Cheng, Haiyang Hu, and Hongzhi Tang. Writing—review and editing: Zhenyu Cheng, Haiyang Hu, Ping Xu, Weidong Liu, and Hongzhi Tang.

Footnotes

This article is a direct contribution from Hongzhi Tang, a member of the Applied and Environmental Microbiology Editorial Board, who arranged for and secured reviews by Yong Nie, Peking University, and Zhenmei Lu, Zhejiang University.

Contributor Information

Haiyang Hu, Email: huhaiyang@sjtu.edu.cn.

Weidong Liu, Email: liu_wd@tib.cas.cn.

Hongzhi Tang, Email: tanghongzhi@sjtu.edu.cn.

Gemma Reguera, Michigan State University, East Lansing, Michigan, USA.

DATA AVAILABILITY

The atomic coordinates of the wild-type Hpo have been deposited in the Protein Data Bank (PDB) under accession number 27DQ. The data from this study are available from the corresponding author upon reasonable request.

SUPPLEMENTAL MATERIAL

The following material is available online at https://doi.org/10.1128/aem.01467-26.

Supplemental material. aem.01467-26-s0001.docx.

Fig. S1 to S6; Tables S1 to S3.

aem.01467-26-s0001.docx (1.8MB, docx)
DOI: 10.1128/aem.01467-26.SuF1

ASM does not own the copyrights to Supplemental Material that may be linked to, or accessed through, an article. The authors have granted ASM a non-exclusive, world-wide license to publish the Supplemental Material files. Please contact the corresponding author directly for reuse.

REFERENCES

  • 1. Kaiser JP, Feng Y, Bollag JM. 1996. Microbial metabolism of pyridine, quinoline, acridine, and their derivatives under aerobic and anaerobic conditions. Microbiol Rev 60:483–498. doi: 10.1128/mr.60.3.483-498.1996 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 2. Gao Q, Wang L, Li Z, Xie Y, He Q, Wang Y. 2019. Adsorptive removal of pyridine in simulation wastewater using coke powder. Processes 7:459. doi: 10.3390/pr7070459 [DOI] [Google Scholar]
  • 3. Padoley KV, Mudliar SN, Pandey RA. 2008. Heterocyclic nitrogenous pollutants in the environment and their treatment options--an overview. Bioresour Technol 99:4029–4043. doi: 10.1016/j.biortech.2007.01.047 [DOI] [PubMed] [Google Scholar]
  • 4. Lee S-T, Lee S-B, Park Y-H. 1991. Characterization of a pyridine-degrading branched Gram-positive bacterium isolated from the anoxic zone of an oil shale column. Appl Microbiol Biotechnol 35:824–829. doi: 10.1007/BF00169903 [DOI] [Google Scholar]
  • 5. Wang SN, Liu Z, Tang HZ, Meng J, Xu Ping. 2007. Characterization of environmentally friendly nicotine degradation by Pseudomonas putida biotype A strain S16. Microbiology 153:1556–1565. doi: 10.1099/mic.0.2006/005223-0 [DOI] [PubMed] [Google Scholar]
  • 6. Behrman EJ, Stanier RY. 1957. The bacterial oxidation of nicotinic acid. J Biol Chem 228:923–945. [PubMed] [Google Scholar]
  • 7. Jiménez JI, Canales A, Jiménez-Barbero J, Ginalski K, Rychlewski L, García JL, Díaz E. 2008. Deciphering the genetic determinants for aerobic nicotinic acid degradation: the nic cluster from Pseudomonas putida KT2440. Proc Natl Acad Sci USA 105:11329–11334. doi: 10.1073/pnas.0802273105 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 8. Tang H, Yao Y, Wang L, Yu H, Ren Y, Wu G, Xu P. 2012. Genomic analysis of Pseudomonas putida: genes in a genome island are crucial for nicotine degradation. Sci Rep 2:377. doi: 10.1038/srep00377 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 9. Tang H, Wang L, Wang W, Yu H, Zhang K, Yao Y, Xu P. 2013. Systematic unraveling of the unsolved pathway of nicotine degradation in Pseudomonas. Genet 9:e1003923. doi: 10.1371/journal.pgen.1003923 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 10. Ryle MJ, Hausinger RP. 2002. Non-heme iron oxygenases. Curr Opin Chem Biol 6:193–201. doi: 10.1016/s1367-5931(02)00302-2 [DOI] [PubMed] [Google Scholar]
  • 11. Solomon EI, Decker A, Lehnert N. 2003. Non-heme iron enzymes: contrasts to heme catalysis. Proc Natl Acad Sci USA 100:3589–3594. doi: 10.1073/pnas.0336792100 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 12. Bruijnincx PCA, van Koten G, Klein Gebbink RJM. 2008. Mononuclear non-heme iron enzymes with the 2-His-1-carboxylate facial triad: recent developments in enzymology and modeling studies. Chem Soc Rev 37:2716–2744. doi: 10.1039/b707179p [DOI] [PubMed] [Google Scholar]
  • 13. Perry C, de Los Santos ELC, Alkhalaf LM, Challis GL. 2018. Rieske non-heme iron-dependent oxygenases catalyse diverse reactions in natural product biosynthesis. Nat Prod Rep 35:622–632. doi: 10.1039/c8np00004b [DOI] [PubMed] [Google Scholar]
  • 14. White MD, Flashman E. 2016. Catalytic strategies of the non-heme iron dependent oxygenases and their roles in plant biology. Curr Opin Chem Biol 31:126–135. doi: 10.1016/j.cbpa.2016.02.017 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 15. Yao Y, Tang H, Ren H, Yu H, Wang L, Zhang W, Behrman EJ, Xu P. 2013. Iron(II)-dependent dioxygenase and N-formylamide deformylase catalyze the reactions from 5-hydroxy-2-pyridone to maleamate. Sci Rep 3:3235. doi: 10.1038/srep03235 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 16. Lange SJ, Que L. 1998. Oxygen activating nonheme iron enzymes. Curr Opin Chem Biol 2:159–172. doi: 10.1016/s1367-5931(98)80057-4 [DOI] [PubMed] [Google Scholar]
  • 17. Kal S, Que L. 2017. Dioxygen activation by nonheme iron enzymes with the 2-His-1-carboxylate facial triad that generate high-valent oxoiron oxidants. J Biol Inorg Chem 22:339–365. doi: 10.1007/s00775-016-1431-2 [DOI] [PubMed] [Google Scholar]
  • 18. Hegg EL, Jr LQ. 1997. The 2‐His‐1‐carboxylate facial triad — an emerging structural motif in mononuclear non‐heme iron(II) enzymes. Eur J Biochem 250:625–629. doi: 10.1111/j.1432-1033.1997.t01-1-00625.x [DOI] [PubMed] [Google Scholar]
  • 19. Liu G, Zhao Y-L, He F, Zhang P, Ouyang X, Tang H, Xu P. 2021. Structure-guided insights into heterocyclic ring-cleavage catalysis of the non-heme Fe (II) dioxygenase NicX. Nat Commun 12:1301. doi: 10.1038/s41467-021-21567-9 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 20. Ouyang X, Liu G, Ji S, Luo S, Shi T, Xu P, Zhao Y-L, Tang H. 2023. Dioxetane and lactone pathways in dioxygenolytic ring cleavage catalyzed by 2,5-dihydroxypyridine dioxygenase. Chem Catalysis 3:100480. doi: 10.1016/j.checat.2022.11.019 [DOI] [Google Scholar]
  • 21. Chovancova E, Pavelka A, Benes P, Strnad O, Brezovsky J, Kozlikova B, Gora A, Sustr V, Klvana M, Medek P, Biedermannova L, Sochor J, Damborsky J. 2012. CAVER 3.0: a tool for the analysis of transport pathways in dynamic protein structures. Comput Biol 8:e1002708. doi: 10.1371/journal.pcbi.1002708 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 22. Jendele L, Krivak R, Skoda P, Novotny M, Hoksza D. 2019. PrankWeb: a web server for ligand binding site prediction and visualization. Nucleic Acids Res 47:W345–W349. doi: 10.1093/nar/gkz424 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 23. Robert X, Guillon C, Gouet P. 2025. FoldScript: a web server for the efficient analysis of AI-generated 3D protein models. Nucleic Acids Res 53:W277–W282. doi: 10.1093/nar/gkaf326 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 24. Otwinowski Z, Minor W. 1997. Processing of X-ray diffraction data collected in oscillation mode. Meth Enzymol 276. doi: 10.1016/S0076-6879(97)76066-X [DOI] [PubMed] [Google Scholar]
  • 25. McCoy AJ, Grosse-Kunstleve RW, Adams PD, Winn MD, Storoni LC, Read RJ. 2007. Phaser crystallographic software. J Appl Crystallogr 40:658–674. doi: 10.1107/S0021889807021206 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 26. Winn MD, Ballard CC, Cowtan KD, Dodson EJ, Emsley P, Evans PR, Keegan RM, Krissinel EB, Leslie AGW, McCoy A, McNicholas SJ, Murshudov GN, Pannu NS, Potterton EA, Powell HR, Read RJ, Vagin A, Wilson KS. 2011. Overview of the CCP4 suite and current developments. Acta Crystallogr D Biol Crystallogr 67:235–242. doi: 10.1107/S0907444910045749 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 27. Murshudov GN, Skubák P, Lebedev AA, Pannu NS, Steiner RA, Nicholls RA, Winn MD, Long F, Vagin AA. 2011. REFMAC5 for the refinement of macromolecular crystal structures. Acta Crystallogr D Biol Crystallogr 67:355–367. doi: 10.1107/S0907444911001314 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 28. Emsley P, Cowtan K. 2004. Coot: model-building tools for molecular graphics. Acta Crystallogr D Biol Crystallogr 60:2126–2132. doi: 10.1107/S0907444904019158 [DOI] [PubMed] [Google Scholar]
  • 29. Brünger AT, Adams PD, Clore GM, DeLano WL, Gros P, Grosse-Kunstleve RW, Jiang JS, Kuszewski J, Nilges M, Pannu NS, Read RJ, Rice LM, Simonson T, Warren GL. 1998. Crystallography & NMR system: a new software suite for macromolecular structure determination. Acta Crystallogr D Biol Crystallogr 54:905–921. doi: 10.1107/s0907444998003254 [DOI] [PubMed] [Google Scholar]
  • 30. Gauthier JJ, Rittenberg SC. 1971. The metabolism of nicotinic acid. J Biol Chem 246:3737–3742. doi: 10.1016/S0021-9258(18)62189-1 [DOI] [PubMed] [Google Scholar]
  • 31. Huang P-S, Ban Y-E, Richter F, Andre I, Vernon R, Schief WR, Baker D. 2011. RosettaRemodel: a generalized framework for flexible backbone protein design. ONE 6:e24109. doi: 10.1371/journal.pone.0024109 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 32. Gordon JC, Myers JB, Folta T, Shoja V, Heath LS, Onufriev A. 2005. H++: a server for estimating pKas and adding missing hydrogens to macromolecules. Nucleic Acids Res 33:W368–71. doi: 10.1093/nar/gki464 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 33. Eberhardt J, Santos-Martins D, Tillack AF, Forli S. 2021. AutoDock Vina 1.2.0: new docking methods, expanded force field, and python bindings. J Chem Inf Model 61:3891–3898. doi: 10.1021/acs.jcim.1c00203 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 34. Trott O, Olson AJ. 2010. AutoDock Vina: improving the speed and accuracy of docking with a new scoring function, efficient optimization, and multithreading. J Comput Chem 31:455–461. doi: 10.1002/jcc.21334 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 35. Maier JA, Martinez C, Kasavajhala K, Wickstrom L, Hauser KE, Simmerling C. 2015. ff14SB: improving the accuracy of protein side chain and backbone parameters from ff99SB. J Chem Theory Comput 11:3696–3713. doi: 10.1021/acs.jctc.5b00255 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 36. Li P, Merz KM. 2016. MCPB.py: a python based metal center parameter builder. J Chem Inf Model 56:599–604. doi: 10.1021/acs.jcim.5b00674 [DOI] [PubMed] [Google Scholar]
  • 37. Case DA, Aktulga HM, Belfon K, Cerutti DS, Cisneros GA, Cruzeiro VWD, Forouzesh N, Giese TJ, Götz AW, Gohlke H, et al. 2023. AmberTools. J Chem Inf Model 63:6183–6191. doi: 10.1021/acs.jcim.3c01153 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 38. Shirts MR, Klein C, Swails JM, Yin J, Gilson MK, Mobley DL, Case DA, Zhong ED. 2017. Lessons learned from comparing molecular dynamics engines on the SAMPL5 dataset. J Comput Aided Mol Des 31:147–161. doi: 10.1007/s10822-016-9977-1 [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 39. Tian L. 2026. Sobtop, Version [2026.1.16]. http://sobereva.com/soft/Sobtop.
  • 40. Abraham MJ, Murtola T, Schulz R, Páll S, Smith JC, Hess B, Lindahl E. 2015. GROMACS: high performance molecular simulations through multi-level parallelism from laptops to supercomputers. SoftwareX 1–2:19–25. doi: 10.1016/j.softx.2015.06.001 [DOI] [Google Scholar]
  • 41. Mark P, Nilsson L. 2001. Structure and dynamics of the TIP3P, SPC, and SPC/E water models at 298 K. J Phys Chem A 105:9954–9960. doi: 10.1021/jp003020w [DOI] [Google Scholar]
  • 42. Bussi G, Donadio D, Parrinello M. 2007. Canonical sampling through velocity rescaling. J Chem Phys 126:014101. doi: 10.1063/1.2408420 [DOI] [PubMed] [Google Scholar]
  • 43. Parrinello M, Rahman A. 1981. Polymorphic transitions in single crystals: a new molecular dynamics method. J Appl Phys 52:7182–7190. doi: 10.1063/1.328693 [DOI] [Google Scholar]
  • 44. Hess B, Bekker H, Berendsen HJC, Fraaije JGEM. 1997. LINCS: a linear constraint solver for molecular simulations. J Comput Chem 18:1463–1472. doi: 10.1002/(SICI)1096-987X(199709)18:12<1463::AID-JCC4>3.0.CO;2-H [DOI] [Google Scholar]
  • 45. Darden T, York D, Pedersen L. 1993. Particle mesh Ewald: an N⋅log(N) method for Ewald sums in large systems. J Chem Phys 98:10089–10092. doi: 10.1063/1.464397 [DOI] [Google Scholar]
  • 46. Schrödinger LLC. 2015. The PyMOL molecular graphics system, version 1.8

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

Supplemental material. aem.01467-26-s0001.docx.

Fig. S1 to S6; Tables S1 to S3.

aem.01467-26-s0001.docx (1.8MB, docx)
DOI: 10.1128/aem.01467-26.SuF1

Data Availability Statement

The atomic coordinates of the wild-type Hpo have been deposited in the Protein Data Bank (PDB) under accession number 27DQ. The data from this study are available from the corresponding author upon reasonable request.


Articles from Applied and Environmental Microbiology are provided here courtesy of American Society for Microbiology (ASM)

RESOURCES