Abstract
To describe the mechanical behaviour of biological tissues and transport processes in biological tissues, conservation laws such as conservation of mass, momentum and energy play a central role. Mathematically these are cast into the form of partial differential equations. Because of nonlinear material behaviour, inhomogeneous properties and usually a complex geometry, it is impossible to find closed-form analytical solutions for these sets of equations. The objective of the finite element method is to find approximate solutions for these problems. The concepts of the finite element method are explained on a finite element continuum model of skeletal muscle. In this case, the momentum equations have to be solved with an extra constraint, because the material behaves as nearly incompressible. The material behaviour consists of a highly nonlinear passive part and an active part. The latter is described with a two-state Huxley model. This means that an extra nonlinear partial differential equation has to be solved. The problems and solutions involved with this procedure are explained. The model is used to describe the mechanical behaviour of a tibialis anterior of a rat. The results have been compared with experimentally determined strains at the surface of the muscle. Qualitatively there is good agreement between measured and calculated strains, but the measured strains were higher.
Full Text
The Full Text of this article is available as a PDF (481.4 KB).
Selected References
These references are in PubMed. This may not be the complete list of references from this article.
- Bovendeerd P. H., Huyghe J. M., Arts T., van Campen D. H., Reneman R. S. Influence of endocardial-epicardial crossover of muscle fibers on left ventricular wall mechanics. J Biomech. 1994 Jul;27(7):941–951. doi: 10.1016/0021-9290(94)90266-6. [DOI] [PubMed] [Google Scholar]
- Breuls Roel G. M., Sengers Bram G., Oomens Cees W. J., Bouten Carlijn V. C., Baaijens Frank P. T. Predicting local cell deformations in engineered tissue constructs: a multilevel finite element approach. J Biomech Eng. 2002 Apr;124(2):198–207. doi: 10.1115/1.1449492. [DOI] [PubMed] [Google Scholar]
- Gielen A. W. J., Oomens C. W. J., Bovendeerd P. H. M., Arts T., Janssen J. D. A Finite Element Approach for Skeletal Muscle using a Distributed Moment Model of Contraction. Comput Methods Biomech Biomed Engin. 2000;3(3):231–244. doi: 10.1080/10255840008915267. [DOI] [PubMed] [Google Scholar]
- HUXLEY A. F. Muscle structure and theories of contraction. Prog Biophys Biophys Chem. 1957;7:255–318. [PubMed] [Google Scholar]
- Van Donkelaar C. C., Kretzers L. J., Bovendeerd P. H., Lataster L. M., Nicolay K., Janssen J. D., Drost M. R. Diffusion tensor imaging in biomechanical studies of skeletal muscle function. J Anat. 1999 Jan;194(Pt 1):79–88. doi: 10.1046/j.1469-7580.1999.19410079.x. [DOI] [PMC free article] [PubMed] [Google Scholar]
- Zahalak G. I., Ma S. P. Muscle activation and contraction: constitutive relations based directly on cross-bridge kinetics. J Biomech Eng. 1990 Feb;112(1):52–62. doi: 10.1115/1.2891126. [DOI] [PubMed] [Google Scholar]
- Zahalak G. I., Motabarzadeh I. A re-examination of calcium activation in the Huxley cross-bridge model. J Biomech Eng. 1997 Feb;119(1):20–29. doi: 10.1115/1.2796060. [DOI] [PubMed] [Google Scholar]
- van Doorn A., Bovendeerd P. H., Nicolay K., Drost M. R., Janssen J. D. Determination of muscle fibre orientation using Diffusion-Weighted MRI. Eur J Morphol. 1996;34(1):5–10. doi: 10.1076/ejom.34.1.5.13156. [DOI] [PubMed] [Google Scholar]