Abstract
The IEEE has gone to ballot on a "Standard for Medical Device Communications", IEEE P1073. The lower layer, hardware portions of the standard are expected to be approved by the IEEE Standards Board at their December 11-13, 1994 meeting. Other portions of the standard are in the initial stages of the IEEE ballot process. The intent of the standard is to allow hospitals and other users to interface medical electronic devices to host computer systems in a standard, interchangeable manner. The standard is optimized for acute care environments such as ICU's, operating rooms, and emergency rooms. [1] IEEE General Committee and Subcommittee work has been on-going since 1984. Significant amounts of work have been done to discover and meet the needs of the patient care setting. Surveys performed in 1989 identified the following four key user requirements for medical device communications: 1) Frequent reconfiguration of the network. 2) Allow "plug and play" operation by users. 3) Associate devices with a specific bed and patient. 4) Support a wide range of hospital computer system topologies. Additionally, the most critical difference in the acute care setting is patient safety, which has an overall effect on the standard. The standard that went to ballot meets these requirements. The standard is based on existing ISO standards. P1073 is compliant with the OSI seven layer model. P1073 specifies the entire communication stack, from object-oriented software to hospital unique connectors. The standard will be able to be put forward as a true international standard, much in the way that the IEEE 802.x family of standards (like Ethernet) were presented as draft ISO standards.(ABSTRACT TRUNCATED AT 250 WORDS)
Full text
PDF
