Abstract
With the resurgence of the use of bone cement in total hip arthroplasty, a renewed concern in techniques or designs that may reduce cement fixation failure has arisen. Analysis of the stresses at the tip of the prosthesis may suggest strategies to reduce loosening. Using a three-dimensional finite element model this study analyzed stresses in the bone, cement, and prosthesis near the tip of a femoral component as a function of cement thickness. A section of an idealized circular femoral shaft with implant prosthesis and cement was modeled with loading conditions representing the stance phase of gait. Increasing cement thickness is predicted to significantly reduce stress in the cement mantle of a femoral implant. Tensile stress is reduced by fifty percent while shear stress is reduced at least twelve percent. Peak tensile stresses occur on the medial side at the tip of the prosthesis in a transverse direction, indicating likelihood of failure due to debonding. Local shear stress peaks also occur at the tip. Shear stresses in the cement mantle are in the same range as the tensile stresses and must be considered when analyzing the possible modes of failure. However, the mode of failure in shear is complex, and shear strength of the stem-cement interface is unknown at present.
Full text
PDF
Selected References
These references are in PubMed. This may not be the complete list of references from this article.
- Davies J. P., Burke D. W., O'Connor D. O., Harris W. H. Comparison of the fatigue characteristics of centrifuged and uncentrifuged Simplex P bone cement. J Orthop Res. 1987;5(3):366–371. doi: 10.1002/jor.1100050308. [DOI] [PubMed] [Google Scholar]
- Harrigan T. P., Harris W. H. A three-dimensional non-linear finite element study of the effect of cement-prosthesis debonding in cemented femoral total hip components. J Biomech. 1991;24(11):1047–1058. doi: 10.1016/0021-9290(91)90021-e. [DOI] [PubMed] [Google Scholar]
- Harrigan T. P., Kareh J. A., O'Connor D. O., Burke D. W., Harris W. H. A finite element study of the initiation of failure of fixation in cemented femoral total hip components. J Orthop Res. 1992 Jan;10(1):134–144. doi: 10.1002/jor.1100100116. [DOI] [PubMed] [Google Scholar]
- Maloney W. J., Jasty M., Burke D. W., O'Connor D. O., Zalenski E. B., Bragdon C., Harris W. H. Biomechanical and histologic investigation of cemented total hip arthroplasties. A study of autopsy-retrieved femurs after in vivo cycling. Clin Orthop Relat Res. 1989 Dec;(249):129–140. [PubMed] [Google Scholar]
- Raab S., Ahmed A. M., Provan J. W. The quasistatic and fatigue performance of the implant/bone-cement interface. J Biomed Mater Res. 1981 Mar;15(2):159–182. doi: 10.1002/jbm.820150205. [DOI] [PubMed] [Google Scholar]
- Saha S., Pal S. Mechanical properties of bone cement: a review. J Biomed Mater Res. 1984 Apr;18(4):435–462. doi: 10.1002/jbm.820180411. [DOI] [PubMed] [Google Scholar]