Abstract
The purpose of this research was to investigate the use of polyethylene glycol (PEG) solutions as the primary binder liquid in a 2-step agglomeration process performed in a rotary processor and characterize the resulting granules and their tableting characteristics. This was done by granulation of binary mixtures of microcrystalline cellulose (MCC) and either lactose, calcium phosphate, acetaminophen, or theophylline, in a 1∶3 ratio, using a 50% (wt/wt) aqueous solution of PEG and water as the binder liquid. Formulations containing lactose were agglomerated using 5 different amounts of the PEG binder solution, giving rise to a PEG content in the range of 6% to 43% (wt/wt). The process outcome was characterized according to adhesion, yield, and water requirement, and the prepared granules were characterized according to size, size distribution, and flow properties as well as tableting properties. The agglomeration of all mixtures resulted in high yields of free-flowing agglomerates and gave rise to good reproducibility of the investigated agglomerate characteristics. The process allowed for the incorporation of 42.5% (wt/wt) PEG, which is higher than the percentage of PEG reported for other equipment. Tables of sufficient strength could be prepared with all investigated excipients using 20% wt/wt PEG; higher PEG contents gave rise to adhesion and prolonged disintegration. In conclusion, agglomeration in a torque-controlled rotary processor using solutions of PEG as the primary binder liquid was found to be a robust process, suitable for the incorporation of high contents of PEG and/or drug compounds.
Keywords: rotary processor, direct agglomeration, torque measurement, PEG binder liquid
Full Text
The Full Text of this article is available as a PDF (467.6 KB).
References
- 1.Seo A, Holm P, Kristensen HG, Schaefer T. The preparation of agglomerates containing solid dispersions of diazepam by melt agglomeration in a high shear mixer. Int J Pharm. 2003;259:161–171. doi: 10.1016/S0378-5173(03)00228-X. [DOI] [PubMed] [Google Scholar]
- 2.Vilhelmsen T, Eliasen H, Schaefer T. Effect of a melt agglomeration process on agglomerates containing solid dispersions. Int J Pharm. 2005;303:132–142. doi: 10.1016/j.ijpharm.2005.07.012. [DOI] [PubMed] [Google Scholar]
- 3.Schaefer T. Growth mechanisms in melt agglomeration in high shear mixers. Powder Technol. 2001;117:68–82. doi: 10.1016/S0032-5910(01)00315-1. [DOI] [Google Scholar]
- 4.Rubinstein MH. A new granulation method for compressed tablets. J Pharm Pharmacol. 1976;28:67–67. [PubMed] [Google Scholar]
- 5.El-Shanawany S. Sustained release of nitrofurantoin from inert wax matrices. J Control Release. 1993;26:11–19. doi: 10.1016/0168-3659(93)90204-I. [DOI] [Google Scholar]
- 6.Seo A, Holm P, Schaefer T. Effects of droplet size and type of binder on agglomerate growth mechanisms by melt agglomeration in a fluidised bed. Eur J Pharm Sci. 2002;16:95–105. doi: 10.1016/S0928-0987(02)00086-6. [DOI] [PubMed] [Google Scholar]
- 7.Schaefer T, Holm P, Kristensen HG. Melt pelletization in a high shear mixer. Part 3. Effects of lactose quality. Acta Pharm Nordica. 1992;4:245–252. [Google Scholar]
- 8.Vilhelmsen T, Kristensen J, Schaefer T. Melt pelletization with polyethylene glycol in a rotary processor. Int J Pharm. 2004;275:141–153. doi: 10.1016/j.ijpharm.2004.01.027. [DOI] [PubMed] [Google Scholar]
- 9.Gu L, Liew CV, Heng PW. Wet spheronization by rotary processing: a multistage single-pot process for producing spheroids. Drug Dev Ind Pharm. 2004;30:111–123. doi: 10.1081/DDC-120028706. [DOI] [PubMed] [Google Scholar]
- 10.Kristensen J, Schaefer T, Kleinebudde P. Direct pelletization in a rotary processor controlled by torque measurements, I: influence of process variables. Pharm Dev Technol. 2000;5:247–256. doi: 10.1081/PDT-100100539. [DOI] [PubMed] [Google Scholar]
- 11.Kristensen J, Schaefer T, Kleinebudde P. Direct pelletization in a rotary processor controlled by torque measurement, II: effect of changes in the content of microcrystalline cellulose. AAPS PharmSci. 2000;2:E24–E24. doi: 10.1208/ps020324. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 12.Murakami H, Yoneyama T, Najakima K, Kobayashi M. Correlation between loose density and compactability of granules prepared by various granulation methods. Int J Pharm. 2001;216:159–164. doi: 10.1016/S0378-5173(01)00575-0. [DOI] [PubMed] [Google Scholar]
- 13.European Pharmacopoeia. Strasbourg, France: Council of Europe; 2002.
- 14.Kristensen J, Hansen VW. Wet granulation in rotary processor and fluid bed: comparison of granule and tablet properties. AAPS PharmSciTech. 2006;7:E22–E22. doi: 10.1208/pt070359. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 15.Schaefer T, Mathiesen C. Melt pelletization in a high shear mixer, VIII: effects of binder viscosity. Int J Pharm. 1996;139:125–138. doi: 10.1016/0378-5173(96)04549-8. [DOI] [Google Scholar]
- 16.Petersen FJ, Wørts O, Schæfer T, Sojka PE. Effervescent atomization of aqueous polymer solutions and disperisons. Pharm Dev Technol. 2001;6:201–210. doi: 10.1081/PDT-100000737. [DOI] [PubMed] [Google Scholar]
- 17.Kristensen J. Direct pelletization in a rotary processor controlled by torque measurements, III: investigation of microcrystalline cellulose and lactose grade. AAPS PharmSciTech. 2005;6:E495–E503. doi: 10.1208/pt060362. [DOI] [PMC free article] [PubMed] [Google Scholar]