Skip to main content
PMC home page
AAPS PharmSciTech logoLink to AAPS PharmSciTech
. 2004 Aug 16;5(4):25–29. doi: 10.1208/pt050454

Hydrophilic excipients modulate the time lag of time-controlled disintegrating press-coated tablets

Shan-Yang Lin 1,✉, Mei-Jane Li 1, Kung-Hsu Lin 1
PMCID: PMC2750479  PMID: 15760051

Abstract

An oral press-coated tablet was developed by means of direct compression to achieve the time-controlled disintegrating or rupturing function with a distinct predetermined lag time. This press-coated tablet containing sodium diclofenac in the inner core was formulated with an outer shell by different weight ratios of hydrophobic polymer of micronized ethylcellulose (EC) powder and hydrophilic excipients such as spray-dried lactose (SDL) or hydroxypropyl methylcellulose (HPMC). The effect of the formulation of an outer shell comprising both hydrophobic polymer and hydrophilic excipients on the time lag of drug release was investigated. The release profile of the press-coated tablet exhibited a time period without drug release (time lag) followed by a rapid and complete release phase, in which the outer shell ruptured or broke into 2 halves. The lag phase was markedly dependent on the weight ratios of EC/SDL or EC/HPMC in the outer shell. Different time lags of the press-coated tablets from 1.0 to 16.3 hours could be modulated by changing the type and amount of the excipients. A semilogarithmic plot of the time lag of the tablet against the weight ratios of EC/SDL or EC/HPMC in the outer shell demonstrated a good linear relationship, withr=0.976 andr=0.982, respectively. The predetermined time lag prior to the drug release from a press-coated tablet prepared by using a micronized EC as a retarding coating shell can be adequately scheduled with the addition of hydrophilic excipients according to the time or site requirements.

Keywords: micronized ethylcellulose, press-coated tablet, time lag, spray-dried lactose, HPMC, time-controlled disintegration, weight ratio

Full Text

The Full Text of this article is available as a PDF (203.0 KB).

References

  • 1.Jivraj M, Martini LG, Thomson CM. An overview of the different excipients useful for the direct compression of tablets. Pharm Sci Technol Today. 2000;3:58–63. doi: 10.1016/S1461-5347(99)00237-0. [DOI] [PubMed] [Google Scholar]
  • 2.Lindberg NO, Berdal A, Enstad G, Seifert E, Lundstedt T. Investigation of flow properties of powders by means of a uniaxial tester, in relation to direct tablet compression. Drug Dev Ind Pharm. 2002;28:15–28. doi: 10.1081/DDC-120001482. [DOI] [PubMed] [Google Scholar]
  • 3.Clausen AE, Bernkop-Schnurch A. Direct compressible polymethacrylic acid-starch compositions for site-specific drug delivery. J Control Release. 2001;75:93–102. doi: 10.1016/S0168-3659(01)00366-2. [DOI] [PubMed] [Google Scholar]
  • 4.Schiermeier S, Schmidt PC. Fast dispersible ibuprofen tablets. Eur J Pharm Sci. 2002;15:295–305. doi: 10.1016/S0928-0987(02)00011-8. [DOI] [PubMed] [Google Scholar]
  • 5.Fukui E, Uemura K, Kobayashi M. Studies on applicability of press-coated tablets using hydroxypropylcellulose (HPC) in the outer shell for timed-release preparations. J Control Release. 2000;68:215–223. doi: 10.1016/S0168-3659(00)00261-3. [DOI] [PubMed] [Google Scholar]
  • 6.Sangalli ME, Maroni A, Zema L, Busetti C, Giordano F, Gazzaniga A. In vitro and in vivo evaluation of an oral system for time and/or site-specific drug delivery. J Control Release. 2001;73:103–110. doi: 10.1016/S0168-3659(01)00291-7. [DOI] [PubMed] [Google Scholar]
  • 7.Krishnaiah YS, Bhaskar Reddy PR, Satyanarayana V, Karthikeyan RS. Studies on the development of oral colon targeted drug delivery systems for metronidazole in the treatment of amoebiasis. Int J Pharm. 2002;236:43–55. doi: 10.1016/S0378-5173(02)00006-6. [DOI] [PubMed] [Google Scholar]
  • 8.Ross AC, MacRae RJ, Walther M, Stevens HN. Chronopharmaceutical drug delivery from a pulsatile capsule device based on programmable erosion. J Pharm Pharmacol. 2000;52:903–909. doi: 10.1211/0022357001774787. [DOI] [PubMed] [Google Scholar]
  • 9.Bussemer T, Otto I, Bodmeier R. Pulsatile drug-delivery systems. Crit Rev Ther Drug Carrier Syst. 2001;18:433–458. [PubMed] [Google Scholar]
  • 10.Baichwal A, Neville D. Advanced drug delivery technology infuses new life into product life-cycles.Business Brief. Pharmatech. 2002; 1–5.
  • 11.Dahl TC. Ethylcellulose. In: Wade A, Weller PJ, editors. Handbook of Pharmaceutical Excipients. Washington, DC: American Pharmaceutical Association; 1994. pp. 186–190. [Google Scholar]
  • 12.Rekhi GS, Jambhekar SS. Ethylcellulose—A polymer review. Drug Dev Ind Pharm. 1995;21:61–77. doi: 10.3109/03639049509048096. [DOI] [Google Scholar]
  • 13.Wesseling M, Bodmeier R. Influence of plasticization time, curing conditions, storage time, and core properties on the drug release from aquacoat-coated pellets. Pharm Dev Technol. 2001;6:325–331. doi: 10.1081/PDT-100002614. [DOI] [PubMed] [Google Scholar]
  • 14.Kojima M, Nakagami H. Development of controlled release matrix pellets by annealing with micronized water-insoluble or enteric polymers. J Control Release. 2002;82:335–343. doi: 10.1016/S0168-3659(02)00143-8. [DOI] [PubMed] [Google Scholar]
  • 15.Upadrashta SM, Katikaneni PR, Hileman GA, Keshary PR. Direct compression controlled release tablets using ethylcellulose matrices. Drug Dev Ind Pharm. 1993;19:449–460. doi: 10.3109/03639049309063202. [DOI] [Google Scholar]
  • 16.Katikaneni PR, Upadrashta SM, Rowlings CE, Neau SH, Hileman GA. Consolidation of ethylcellulose: effect of particle size, press speed, and lubricant. Int J Pharm. 1995;117:13–21. doi: 10.1016/0378-5173(94)00288-G. [DOI] [Google Scholar]
  • 17.Desai RP, Neau SH, Pather SI, Johnston TP. Fine-particle ethylcellulose as a tablet binder in direct compression, immediate-release tablets. Drug Dev Ind Pharm. 2001;27:633–641. doi: 10.1081/DDC-100107319. [DOI] [PubMed] [Google Scholar]
  • 18.Lin SY, Lin KH. Compression behavior of the different grades of ethyl cellulose. J Pharm Sci Technol Japan. 1995;55:254–260. [Google Scholar]
  • 19.Lin SY, Lin KH. Water uptake and drug release behavior of drug-loaded compacts prepared from different grades of ethylcellulose. Eur J Pharm Biopharm. 2004;42:193–198. [Google Scholar]
  • 20.Agrawal AM, Manek RV, Kolling WM, Neau SH. Studies on the interaction of water with ethylcellulose: Effect of polymer particle size. AAPS PharmSciTech. 2003;4:E60–E60. doi: 10.1208/pt040460. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 21.Lin SY, Lin KH, Li MJ. Micronized ethylcellulose used for designing a directly compressed time-controlled disintegration tablet. J Control Release. 2001;70:321–328. doi: 10.1016/S0168-3659(00)00360-6. [DOI] [PubMed] [Google Scholar]
  • 22.Lin KH, Lin SY, Li MJ. Compression forces and amount of outer coating layer affecting the time-controlled disintegration of the compression-coated tablets prepared by direct compression with micronized ethylcellulose. J Pharm Sci. 2001;90:2005–2009. doi: 10.1002/jps.1151. [DOI] [PubMed] [Google Scholar]
  • 23.Lin SY, Lin KH, Li MJ. Influence of excipients, drugs, and osmotic agent in the inner core on the time-controlled disintegration of compression-coated ethylcellulose tablets. J Pharm Sci. 2002;91:2040–2046. doi: 10.1002/jps.10197. [DOI] [PubMed] [Google Scholar]
  • 24.Ishikawa T, Watanabe Y, Takayama K, Endo H, Matsumoto M. Effect of hydroxypropylmethylcellulose (HPMC) on the release profile and bioavailability of a poorly water-soluble drug from tablets prepared using macrogol and HPMC. Int J Pharm. 2000;202:173–178. doi: 10.1016/S0378-5173(00)00426-9. [DOI] [PubMed] [Google Scholar]
  • 25.Williams RO, Reynolds TD, Cabelka TD, Sykora MA, Mahaguna V. Investigation of excipient type and level on drug release from controlled release tablets containing HPMC. Pharm Dev Technol. 2002;7:181–193. doi: 10.1081/PDT-120003486. [DOI] [PubMed] [Google Scholar]
  • 26.Tiwari SB, Murthy TK, Pai MR, Mehta PR, Chowdary PB. Controlled release formulation of tramadol hydrochloride using hydrophilic and hydrophobic matrix system. AAPS PharmSciTech. 2003;4:E31–E31. doi: 10.1208/pt040331. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 27.Pozzi F, Furlani P, Gazzaniga A, Davis SS, Wilding IR. The time clock system: a new oral dosage form for fast and complete release of drug after a predetermined lag time. J Control Release. 1994;31:99–108. doi: 10.1016/0168-3659(94)90255-0. [DOI] [Google Scholar]
  • 28.Narisawa S, Nagata M, Danyoshi C, Yoshino H, Murata K, Hirakawa Y, Noda K. An organic acid-induced sigmoidal released system for oral controlled-release preparations. Pharm Res. 1994;11:111–116. doi: 10.1023/A:1018910114436. [DOI] [PubMed] [Google Scholar]
  • 29.Dorkoosh FA, Verhoef JC, Borchard G, Rafiee-Tehrani M, Junginger HE. Development and characterization of a novel peroral peptide drug delivery system. J Control Release. 2001;71:307–318. doi: 10.1016/S0168-3659(01)00232-2. [DOI] [PubMed] [Google Scholar]
  • 30.Takeuchi H, Yasuji T, Hino T, Yamamoto H, Kawashima Y. Compaction properties of composite particles consisting of lactose with sodium alginate prepared by spray-drying. Pharm Res. 1999;16:1193–1198. doi: 10.1023/A:1018937227794. [DOI] [PubMed] [Google Scholar]
  • 31.Takeuchi H, Yasuji T, Yamamoto H, Kawashima Y. Spray-dried lactose composite particles containing an ion complex of alginate-chitosan for designing a dry-coated tablet having a time-controlled releasing function. Pharm Res. 2000;17:94–99. doi: 10.1023/A:1007530927887. [DOI] [PubMed] [Google Scholar]
  • 32.Verma RK, Krishna DM, Garg S. Formulation aspects in the development of osmotically controlled oral drug delivery systems. J Control Release. 2002;79:7–27. doi: 10.1016/S0168-3659(01)00550-8. [DOI] [PubMed] [Google Scholar]
  • 33.Makhija SN, Vavia PR. Controlled porosity osmotic pump-based controlled release systems of pseudoephedrine. I. Cellulose acetate as a semipermeable membrane. J Control Release. 2003;89:5–18. doi: 10.1016/S0168-3659(02)00482-0. [DOI] [PubMed] [Google Scholar]
  • 34.Vervarcke S, Ollevier F, Kinget R, Michoel A. Development of a lag time coating for drug-layered fish feed pellets. Pharm Dev Technol. 2002;7:471–480. doi: 10.1081/PDT-120015049. [DOI] [PubMed] [Google Scholar]
  • 35.Martinez-Gonzalez I, Villafuerte-Robles L. Effect of varying the restriction degree of 4-aminopyridine release from HPMC matrices on the mechanism controlling the process. Int J Pharm. 2003;257:253–264. doi: 10.1016/S0378-5173(03)00150-9. [DOI] [PubMed] [Google Scholar]
  • 36.Frohoff-Hulsmann MA, Lippold BC, McGinity JW. Aqueous ethyl cellulose dispersion containing plasticizers of different water solubility and hydroxypropyl methyl-cellulose as coating material for diffusion pellets II: properties of sprayed films. Eur J Pharm Biopharm. 1999;48:67–75. doi: 10.1016/S0939-6411(99)00023-5. [DOI] [PubMed] [Google Scholar]
  • 37.Sadeghi F, Ford JL, Rubinstein MH, Rajabi-Siahboomi AR. Study of drug release from pellets coated with Surelease containing hydroxypropyl methylcellulose. Drug Dev Ind Pharm. 2001;27:419–430. doi: 10.1081/DDC-100104317. [DOI] [PubMed] [Google Scholar]

Articles from AAPS PharmSciTech are provided here courtesy of American Association of Pharmaceutical Scientists

RESOURCES