Skip to main content
AAPS PharmSciTech logoLink to AAPS PharmSciTech
. 2005 Dec 7;6(4):E626–E632. doi: 10.1208/pt060477

Design and evaluation of 1- and 3-layer matrices of verapamil hydrochloride for sustaining its release

Mohammad Reza Siahi 1, Mohammad Barzegar-Jalali 1, Farnaz Monajjemzadeh 1, Fatemeh Ghaffari 1, Shirzad Azarmi 1,
PMCID: PMC2750610  PMID: 16408864

Abstract

The present study was performed to design oral controlled delivery systems for the water-soluble drug, verapamil hydrochloride, using natural and semisynthetic polymers as carriers in the forms of 1- and 3-layer matrix tablets. Verapamil hydrochloride 1-layer matrix tablets containing hydroxypropylmethylcellulose, tragacanth, and acacia either alone or mixed were prepared by direct compression technique. 3-layer matrix tablets were prepared by compressing the polymers as release retardant layers on both sides of the core containing the drug. The prepared tablets were subjected to in vitro drug release studies. Tragacanth when used as the carrier in the formulation of 1- and 3-layer matrices produced satisfactory release prolongation either alone or in combination with the other 2 polymers. On the other hand, acacia did not show enough prolonging efficiency in 1- and 3-layer matrix tablets. The results also showed that the location of the polymers in the 3-layer tablets has a pronounced effect on the drug release. Kinetic analysis of drug release from matrices exhibiting sustained release indicated that release was predominantly attributable to the contribution made by Fickian diffusion, while the erosion/relaxation mechanisms had a minor role in the release.

Keywords: verapamil, sustained release, 1- and 3-layer matrix, tragacanth, acacia, HPMC

Full Text

The Full Text of this article is available as a PDF (206.1 KB).

References

  • 1.Peppas NA. Hydrogels in Medicine and Pharmacy. Boca Raton, FL: CRC Press; 1998. [Google Scholar]
  • 2.Conte U, Maggi L, Colombo P, Manna A. Multilayered hydrophilic matrices as constant release devices (Geomatrix Systems) J Control Release. 1993;26:39–47. doi: 10.1016/0168-3659(93)90207-L. [DOI] [Google Scholar]
  • 3.Narasimhan B, Langer R. Zero-order release of micro- and macromolecules from polymeric devices: the role of burst effect. J Control Release. 1997;47:13–20. doi: 10.1016/S0168-3659(96)01611-2. [DOI] [Google Scholar]
  • 4.Lee ES, Kim SW, Kim SH, Cardinal JR, Jacobs H. Drug release from hydrogel devices with rate-controlling barriers. J Membr Sci. 1980;7:293–303. doi: 10.1016/S0376-7388(00)80474-3. [DOI] [Google Scholar]
  • 5.Bodmeier R, Paeratakul O. Drug release from laminated polymeric films prepared from aqueous latexes. J Pharm Sci. 1990;79:32–36. doi: 10.1002/jps.2600790109. [DOI] [PubMed] [Google Scholar]
  • 6.Krishnaiah YS, Karthikeyan RS, Gouri Sankar V, Satyanarayana V. Three-layer guar gum matrix tablet formulations for oral controlled delivery of highly soluble trimetazidine dihydrochloride. J Control Release. 2002;81:45–56. doi: 10.1016/S0168-3659(02)00031-7. [DOI] [PubMed] [Google Scholar]
  • 7.Wade A, Weller PJ. Handbook of Pharmaceutical Excipients. London, UK: The Pharmaceutical Press; 1994. [Google Scholar]
  • 8.Khan KA. Concept of dissolution efficiency. J Pharm Pharmacol. 1975;27:48–49. doi: 10.1111/j.2042-7158.1975.tb09378.x. [DOI] [PubMed] [Google Scholar]
  • 9.Peppas NA, Sahlin JJ. A simple equation for the description of solute release. 3. Coupling of diffusion and relaxation. Int J Pharm. 1989;57:169–172. doi: 10.1016/0378-5173(89)90306-2. [DOI] [Google Scholar]
  • 10.Chukwu KI, Udeala OK. Binding effectiveness of Colocasia esculenta gum in poorly compressible drugs-paracetamol and metronidazole tablet formulations. Boll Chim Farm. 2000;139:89–97. [PubMed] [Google Scholar]
  • 11.Bhardwaj TR, Kanwar M, Lal R, Gupta A. Natural gums and modified natural gums as sustained release carriers. Drug Dev Ind Pharm. 2000;26:1025–1038. doi: 10.1081/DDC-100100266. [DOI] [PubMed] [Google Scholar]
  • 12.Meshali MM, Gabr KE. Effect of interpolymer complex formation of chitosan with pectin or acacia on the release behavior of chlorpromazine HCl. Int J Pharm. 1993;89:177–181. doi: 10.1016/0378-5173(93)90241-7. [DOI] [Google Scholar]
  • 13.Johnston D, Gray MR, Reed CS, Bonner FW, Anderson NH. Comparative evaluation of 5 common suspending agents used in drug safety studies. Drug Dev Ind Pharm. 1990;16:1893–1909. doi: 10.3109/03639049009028346. [DOI] [Google Scholar]
  • 14.Chukwu A. Studies on Detarium microcarpium gum. 2. Investigation as a prolonged release matrix for encapsulated chlorpheniramine maleate. STP Pharma Sci. 1994;4:399–403. [Google Scholar]
  • 15.Chukwu A. Studies on Detarium microcarpium gum. 3. In vitro characteristics of prolonged release chlorpheniramine maleate tablets. STP Pharma Sci. 1994;4:404–408. [Google Scholar]
  • 16.Berens AR, Hopfenberg HB. Diffusion and relaxation in glassy polymer powders. 2. Separation of diffusion and relaxation parameters. Polymers. 1978;19:489–497. doi: 10.1016/0032-3861(78)90269-0. [DOI] [Google Scholar]
  • 17.Pham AT, Lee PI. Probing the mechanism of drug release from hydroxypropylmethyl cellulose matrices. Pharm Res. 1994;11:1379–1384. doi: 10.1023/A:1018975318805. [DOI] [PubMed] [Google Scholar]
  • 18.Durig T, Fassihi R. Guar-based monolithic matrix systems: effect of ionizable and non-ionizable substances and excipients on gel dynamics and release kinetics. J Control Release. 2002;80:45–56. doi: 10.1016/S0168-3659(01)00546-6. [DOI] [PubMed] [Google Scholar]
  • 19.Pillay V, Fassihi R. A novel approach for constant rate delivery of highly soluble bioactives from a simple monolithic system. J Control Release. 2000;67:67–78. doi: 10.1016/S0168-3659(00)00193-0. [DOI] [PubMed] [Google Scholar]

Articles from AAPS PharmSciTech are provided here courtesy of American Association of Pharmaceutical Scientists

RESOURCES