Skip to main content
Acta Crystallographica Section E: Structure Reports Online logoLink to Acta Crystallographica Section E: Structure Reports Online
. 2009 Nov 25;65(Pt 12):o3217. doi: 10.1107/S1600536809048909

1,4-Bis(2-nitro­phen­oxy)butane

Perla Elizondo a, Cecilia Rodríguez de Barbarín a,*, Blanca Nájera a, Nancy Pérez a
PMCID: PMC2972046  PMID: 21578925

Abstract

The asymmetric unit of the title compound, C16H16N2O6, contains one-half mol­ecule, the mid-point of the central C—C bond being located on a crystallographic inversion center. The crystal structure shows weak inter­actions between the O atoms of the nitro groups and two different C—H groups of the benzene rings. The extended weak hydrogen-bond formation, involving the NO2 groups, generates an infinite three-dimensional network.

Related literature

For related structures, see: Han & Zhen (2005); Naz et al. (2007); Zhang et al. (2007). For recent examples of complexes with macrocyclic ligands, including diether subunits, see: Fernández et al. (2008); Platas-Iglesias et al. (2005); Tas et al. (2006).graphic file with name e-65-o3217-scheme1.jpg

Experimental

Crystal data

  • C16H16N2O6

  • M r = 332.31

  • Monoclinic, Inline graphic

  • a = 7.7977 (8) Å

  • b = 13.888 (2) Å

  • c = 7.6729 (8) Å

  • β = 110.866 (6)°

  • V = 776.4 (2) Å3

  • Z = 2

  • Mo Kα radiation

  • μ = 0.11 mm−1

  • T = 296 K

  • 0.7 × 0.6 × 0.4 mm

Data collection

  • Bruker P4 diffractometer

  • Absorption correction: none

  • 3850 measured reflections

  • 2256 independent reflections

  • 1752 reflections with I > 2σ(I)

  • R int = 0.030

  • 3 standard reflections every 97 reflections intensity decay: 2.3%

Refinement

  • R[F 2 > 2σ(F 2)] = 0.048

  • wR(F 2) = 0.130

  • S = 1.06

  • 2256 reflections

  • 110 parameters

  • H-atom parameters constrained

  • Δρmax = 0.22 e Å−3

  • Δρmin = −0.19 e Å−3

Data collection: XSCANS (Siemens, 1996); cell refinement: XSCANS; data reduction: SHELXTL-Plus (Sheldrick, 2008); program(s) used to solve structure: SHELXTL-Plus; program(s) used to refine structure: SHELXTL-Plus; molecular graphics: SHELXTL-Plus and Mercury (Macrae et al., 2006); software used to prepare material for publication: SHELXTL-Plus.

Supplementary Material

Crystal structure: contains datablocks I, global. DOI: 10.1107/S1600536809048909/im2156sup1.cif

e-65-o3217-sup1.cif (15.3KB, cif)

Structure factors: contains datablocks I. DOI: 10.1107/S1600536809048909/im2156Isup2.hkl

e-65-o3217-Isup2.hkl (110.9KB, hkl)

Additional supplementary materials: crystallographic information; 3D view; checkCIF report

Table 1. Hydrogen-bond geometry (Å, °).

D—H⋯A D—H H⋯A DA D—H⋯A
C3—H3A⋯O1i 0.93 2.63 3.284 (2) 128
C5—H5A⋯O2ii 0.93 2.58 3.476 (2) 163

Symmetry codes: (i) Inline graphic; (ii) Inline graphic; (iii) Inline graphic.

Acknowledgments

The authors thank the PAICYT of the UANL for support of this work [project Number CA-1260–06].

supplementary crystallographic information

Comment

The title compound (I) has been synthesized as a chemical precursor of a variety of acyclic and macrocyclic multidentate ligands and metal complexes.

Related compounds have been reported (Zhang et al., 2007; Naz et al., 2007 and Han & Zhen, 2005). Similar cyclic and macrocyclic ligands to (I), have been reported (Fernández et al., 2008; Tas et al., 2006 and Platas-Iglesias et al., 2005).

Compound (I) crystallizes with the molecule being situated on a crystallographic inversion center that is localized at the midpoint of the C8—C8i bond [symmetry code: (i) -x, -y, -z + 1] (Fig. 1). As a consequence of the centrosymmetric nature of the molecule a dihedral angle of 0° is observed between the benzene rings in (I). The torsion angle between a benzene ring and the corresponding nitro group is 38.5 (1)°. The conformation of the central chain is described by torsion angles, C6—O3—C7—C8, -178.2 (1)°, O3—C7—C8—C8i, 62.6 (2)° and C7—C8—C8i—C7i, constrained by symmetry to 180.0°. This trans-gauche-trans conformation stabilized in the solid state for (I) is less common than the all-trans conformation that is generally found in aliphatic systems. This molecular conformation is stabilized by weak intramolecular hydrogen bonds involving O3 and a symmetry related C—H group (O3···H8B 2.900 (2) Å). Nevertheless, O atoms in (I) may coordinate to a metal center as a chelating ligand after changing the conformation of this potential ligand. These observations suggest that (I) is a highly flexible molecule, with an almost free rotation about all σ bonds.

In addition, the crystal structure shows weak interactions between oxygen atoms of the nitro groups and two different C—H groups of benzene rings (O1···H3A 2.627 and O2···H5A 2.577 Å) as shown in Fig 2. The extended weak H bond formation, using the NO2 groups, produces an infinite three-dimensional network of the title compound.

Experimental

o-Nitrophenol (23.90 g) in hot DMF (25.0 ml) was treated with potassium carbonate (11.90 g), added slowly in portions. The solution was gently boiled and 1,4-dibromobutane (8.40 ml) was added during 30 min. Gentle reflux was mantained for another 2 h. Then solvent (15.0 ml) was destilled from the mixture and the remaining mixture was poured into water (250 ml). The granular yellow solid was filtered off, washed with dilute aqueous sodium hydroxide solution and water, then dried (23.8 g). M.p. 442–443 K, yield 81%.

Suitable crystals were obtained as colorless blocks from acetonitrile solution by slow evaporation of the solvent at 298 K. The solid was characterized by IR (KBr disc), 1H-NMR and elemental analysis, which are in agreement with the X-ray structure.

Refinement

Hydrogen atoms bonded to C atoms were included in calculated positions and refined using the riding method, with C—H distances constrained to 0.93 (aromatic CH) and 0.97 Å (methylene CH2) and Uiso(H) = 1.2Ueq(carrier C).

Figures

Fig. 1.

Fig. 1.

Molecular structure of (I). Displacement ellipsoids are drawn at the 30% probability level and H atoms are shown as small spheres of arbitrary radii. Atoms not labelled are related to the asymmetric unit by symmetry code -x, -y, -z + 1.

Fig. 2.

Fig. 2.

Molecular packing structure of (I) showing week interactions between O of the nitro groups and H atoms of two different C—H groups of the benzene rings (dashed bonds). H atoms not involved in this network have been omitted.

Crystal data

C16H16N2O6 F(000) = 348
Mr = 332.31 Dx = 1.421 Mg m3
Monoclinic, P21/c Melting point = 442–443 K
Hall symbol: -P 2ybc Mo Kα radiation, λ = 0.71073 Å
a = 7.7977 (8) Å Cell parameters from 85 reflections
b = 13.888 (2) Å θ = 5.2–12.4°
c = 7.6729 (8) Å µ = 0.11 mm1
β = 110.866 (6)° T = 296 K
V = 776.4 (2) Å3 Block, colorless
Z = 2 0.7 × 0.6 × 0.4 mm

Data collection

Bruker P4 diffractometer Rint = 0.030
Radiation source: fine-focus sealed tube θmax = 30.0°, θmin = 2.9°
graphite h = −10→10
ω scan k = −1→19
3850 measured reflections l = −10→5
2256 independent reflections 3 standard reflections every 97 reflections
1752 reflections with I > 2σ(I) intensity decay: 2.3%

Refinement

Refinement on F2 Primary atom site location: structure-invariant direct methods
Least-squares matrix: full Secondary atom site location: difference Fourier map
R[F2 > 2σ(F2)] = 0.048 Hydrogen site location: inferred from neighbouring sites
wR(F2) = 0.130 H-atom parameters constrained
S = 1.06 w = 1/[σ2(Fo2) + (0.0452P)2 + 0.1839P] where P = (Fo2 + 2Fc2)/3
2256 reflections (Δ/σ)max < 0.001
110 parameters Δρmax = 0.22 e Å3
0 restraints Δρmin = −0.19 e Å3

Special details

Experimental. Experimental absorption correction were not applied because the molecule is purely organic, and no better structure refinement was obtained.
Geometry. All e.s.d.'s (except the e.s.d. in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell e.s.d.'s are taken into account individually in the estimation of e.s.d.'s in distances, angles and torsion angles; correlations between e.s.d.'s in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell e.s.d.'s is used for estimating e.s.d.'s involving l.s. planes.
Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > σ(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R- factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2)

x y z Uiso*/Ueq
O1 0.19481 (19) 0.21566 (10) 0.9250 (3) 0.0923 (5)
O2 0.32880 (19) 0.33983 (9) 0.8740 (2) 0.0827 (4)
O3 0.28310 (12) 0.07009 (6) 0.74649 (13) 0.0474 (3)
N1 0.32195 (16) 0.25370 (9) 0.89929 (17) 0.0506 (3)
C1 0.47947 (16) 0.19562 (9) 0.90340 (16) 0.0392 (3)
C2 0.65074 (18) 0.23662 (10) 0.98583 (19) 0.0487 (3)
H2A 0.6618 0.2979 1.0376 0.058*
C3 0.80442 (19) 0.18694 (12) 0.9912 (2) 0.0575 (4)
H3A 0.9205 0.2136 1.0478 0.069*
C4 0.7837 (2) 0.09688 (12) 0.9114 (2) 0.0579 (4)
H4A 0.8874 0.0634 0.9126 0.070*
C5 0.61331 (19) 0.05505 (10) 0.8296 (2) 0.0497 (3)
H5A 0.6038 −0.0060 0.7772 0.060*
C6 0.45534 (16) 0.10362 (9) 0.82495 (16) 0.0388 (3)
C7 0.2563 (2) −0.01938 (9) 0.6464 (2) 0.0495 (3)
H7A 0.3192 −0.0712 0.7294 0.059*
H7B 0.3044 −0.0151 0.5462 0.059*
C8 0.0531 (2) −0.03792 (10) 0.5688 (2) 0.0534 (4)
H8A 0.0081 −0.0418 0.6699 0.064*
H8B 0.0315 −0.0991 0.5063 0.064*

Atomic displacement parameters (Å2)

U11 U22 U33 U12 U13 U23
O1 0.0717 (8) 0.0766 (9) 0.1558 (14) −0.0089 (7) 0.0739 (9) −0.0235 (9)
O2 0.0880 (9) 0.0461 (6) 0.1202 (12) 0.0135 (6) 0.0448 (8) 0.0006 (7)
O3 0.0423 (5) 0.0429 (5) 0.0527 (5) −0.0051 (4) 0.0117 (4) −0.0121 (4)
N1 0.0481 (6) 0.0500 (6) 0.0554 (7) −0.0005 (5) 0.0205 (5) −0.0119 (5)
C1 0.0392 (6) 0.0400 (6) 0.0386 (6) −0.0007 (4) 0.0142 (5) −0.0014 (5)
C2 0.0467 (7) 0.0481 (7) 0.0479 (7) −0.0098 (5) 0.0125 (5) −0.0025 (5)
C3 0.0388 (6) 0.0690 (9) 0.0584 (8) −0.0073 (6) 0.0098 (6) 0.0055 (7)
C4 0.0425 (7) 0.0699 (9) 0.0606 (9) 0.0146 (6) 0.0174 (6) 0.0126 (7)
C5 0.0506 (7) 0.0459 (7) 0.0510 (7) 0.0100 (5) 0.0160 (6) 0.0012 (6)
C6 0.0393 (6) 0.0388 (6) 0.0365 (5) −0.0013 (4) 0.0111 (4) 0.0003 (4)
C7 0.0574 (8) 0.0354 (6) 0.0501 (7) −0.0045 (5) 0.0122 (6) −0.0054 (5)
C8 0.0603 (8) 0.0385 (6) 0.0520 (8) −0.0123 (6) 0.0085 (6) 0.0006 (5)

Geometric parameters (Å, °)

O1—N1 1.2000 (16) C4—C5 1.380 (2)
O2—N1 1.2159 (17) C4—H4A 0.9300
O3—C6 1.3443 (15) C5—C6 1.3937 (18)
O3—C7 1.4363 (15) C5—H5A 0.9300
N1—C1 1.4604 (16) C7—C8 1.504 (2)
C1—C2 1.3807 (17) C7—H7A 0.9700
C1—C6 1.3962 (17) C7—H7B 0.9700
C2—C3 1.371 (2) C8—C8i 1.512 (3)
C2—H2A 0.9300 C8—H8A 0.9600
C3—C4 1.377 (2) C8—H8B 0.9601
C3—H3A 0.9300
C6—O3—C7 118.09 (10) C4—C5—H5A 119.8
O1—N1—O2 123.04 (14) C6—C5—H5A 119.8
O1—N1—C1 119.40 (13) O3—C6—C5 125.22 (12)
O2—N1—C1 117.54 (12) O3—C6—C1 118.02 (11)
C2—C1—C6 122.32 (11) C5—C6—C1 116.73 (11)
C2—C1—N1 116.81 (11) O3—C7—C8 106.96 (11)
C6—C1—N1 120.86 (11) O3—C7—H7A 110.3
C3—C2—C1 119.93 (13) C8—C7—H7A 110.3
C3—C2—H2A 120.0 O3—C7—H7B 110.3
C1—C2—H2A 120.0 C8—C7—H7B 110.3
C2—C3—C4 118.77 (13) H7A—C7—H7B 108.6
C2—C3—H3A 120.6 C7—C8—C8i 113.25 (14)
C4—C3—H3A 120.6 C7—C8—H8A 109.1
C3—C4—C5 121.74 (13) C8i—C8—H8A 109.7
C3—C4—H4A 119.1 C7—C8—H8B 108.7
C5—C4—H4A 119.1 C8i—C8—H8B 108.2
C4—C5—C6 120.48 (13) H8A—C8—H8B 107.7
O1—N1—C1—C2 −141.19 (16) C7—O3—C6—C1 172.71 (11)
O2—N1—C1—C2 37.07 (18) C4—C5—C6—O3 178.93 (13)
O1—N1—C1—C6 39.59 (19) C4—C5—C6—C1 1.0 (2)
O2—N1—C1—C6 −142.15 (14) C2—C1—C6—O3 −179.48 (12)
C6—C1—C2—C3 0.5 (2) N1—C1—C6—O3 −0.30 (17)
N1—C1—C2—C3 −178.69 (13) C2—C1—C6—C5 −1.43 (18)
C1—C2—C3—C4 0.8 (2) N1—C1—C6—C5 177.75 (12)
C2—C3—C4—C5 −1.2 (2) C6—O3—C7—C8 −178.18 (11)
C3—C4—C5—C6 0.2 (2) O3—C7—C8—C8i 62.6 (2)
C7—O3—C6—C5 −5.15 (19)

Symmetry codes: (i) −x, −y, −z+1.

Hydrogen-bond geometry (Å, °)

D—H···A D—H H···A D···A D—H···A
C3—H3A···O1ii 0.93 2.63 3.284 (2) 128
C5—H5A···O2iii 0.93 2.58 3.476 (2) 163
C8—H8B···O3i 0.96 2.56 2.900 (2) 101

Symmetry codes: (ii) x+1, y, z; (iii) −x+1, y−1/2, −z+3/2; (i) −x, −y, −z+1.

Footnotes

Supplementary data and figures for this paper are available from the IUCr electronic archives (Reference: IM2156).

References

  1. Fernández, M. del C., Bastida, R., Macías, A., Valencia, L. & Pérez, P. (2008). Polyhedron, 27, 2301–2308.
  2. Han, J.-R. & Zhen, X.-L. (2005). Acta Cryst. E61, o4358–o4359.
  3. Macrae, C. F., Edgington, P. R., McCabe, P., Pidcock, E., Shields, G. P., Taylor, R., Towler, M. & van de Streek, J. (2006). J. Appl. Cryst. 39, 453–457.
  4. Naz, T., Akhter, Z., Bolte, M. & Siddiqi, H. M. (2007). Acta Cryst. E63, o3777.
  5. Platas-Iglesias, C., Vaiana, L., Esteban-Gómez, D., Avecilla, F., Real, J. A., de Blas, A. & Rodríguez-Blas, T. (2005). Inorg. Chem. 44, 9704–9713. [DOI] [PubMed]
  6. Sheldrick, G. M. (2008). Acta Cryst. A64, 112–122. [DOI] [PubMed]
  7. Siemens (1996). XSCANS. Siemens Analytical X-ray Instruments Inc., Madison, Wisconsin, USA.
  8. Tas, E., Aslanoglu, M., Kilic, A., Kaplan, O. & Temel, H. (2006). J. Chem. Res. pp. 242–245.
  9. Zhang, Q.-L., Zhao, Y.-C., Zhang, Y.-Q., Xue, S.-F. & Tao, Z. (2007). Acta Cryst. E63, o4885.

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

Crystal structure: contains datablocks I, global. DOI: 10.1107/S1600536809048909/im2156sup1.cif

e-65-o3217-sup1.cif (15.3KB, cif)

Structure factors: contains datablocks I. DOI: 10.1107/S1600536809048909/im2156Isup2.hkl

e-65-o3217-Isup2.hkl (110.9KB, hkl)

Additional supplementary materials: crystallographic information; 3D view; checkCIF report


Articles from Acta Crystallographica Section E: Structure Reports Online are provided here courtesy of International Union of Crystallography

RESOURCES