tert-Butyl 2-methyl-2-(4-nitro­benzo­yl)propanoate

Chelsey M Crosse; Marshall W Logue; Rudy L Luck; Louis R Pignotti; Melissa F Waineo

doi:10.1107/S1600536810003119

. 2010 Jan 30;66(Pt 2):o495–o496. doi: 10.1107/S1600536810003119

tert-Butyl 2-methyl-2-(4-nitrobenzoyl)propanoate

Chelsey M Crosse ^a, Marshall W Logue ^a, Rudy L Luck ^a,^*, Louis R Pignotti ^a, Melissa F Waineo ^a

PMCID: PMC2979732 PMID: 21579899

Abstract

The title compound, C₁₅H₁₉NO₅, is bent with a dihedral angle of 61.8 (2)° between the mean planes of the benzene ring and a group encompassing the ester functionality (O=C—O—C). The dihedral angle of 0.8 (2)° between the mean planes of the nitro group and the benzene ring indicates near coplanarity. In the crystal, each molecule is linked to four adjacent molecules by weak C—H⋯O hydrogen-bonding interactions. Both benzene H atoms ortho to the ketone O atom form C—H⋯O hydrogen bonds with the keto O atoms of two neighboring molecules (of the keto and ester groups, respectively), and the two other interactions involve the H atoms from a methyl group of the dimethyl residue, displaying C—H⋯O interactions with the O atoms of the nitro groups. These four interactions for each molecule lead to the formation of two-dimensional sheets with a hydrophilic interior, held together by weak hydrogen-bonded interactions, and a hydrophobic exterior composed of protruding methyl groups which interstack with the methyl groups in adjacent sheets.

Related literature

For the synthesis, spectroscopic characterization and reactivity of the title compound, see: Logue (1974 ▶); Logue et al. (1975 ▶). For related structures, see: Crosse et al. (2010 ▶); Gould et al. (2010 ▶); Logue et al. (2010 ▶). For the syntheses and characterization of structurally similar indanone-derived β-keto ester derivatives, see: Alemán et al. (2007 ▶); Elsner et al. (2008 ▶); Mouri et al. (2009 ▶); Noritake et al. (2008 ▶); Rigby & Dixon (2008 ▶); Wang et al. (2006 ▶). For weak hydrogen-bonded interactions, see: Karle et al. (2009 ▶).

Experimental

Crystal data

C₁₅H₁₉NO₅
M _r = 293.31
Monoclinic,
a = 11.379 (4) Å
b = 11.393 (4) Å
c = 12.283 (5) Å
β = 94.88 (3)°
V = 1586.6 (10) Å³
Z = 4
Mo Kα radiation
μ = 0.09 mm⁻¹
T = 291 K
0.50 × 0.20 × 0.05 mm

Data collection

Enraf–Nonius TurboCAD-4 diffractometer
Absorption correction: ψ scan (North et al., 1968 ▶) T _min = 0.931, T _max = 0.993
2933 measured reflections
2785 independent reflections
1196 reflections with I > 2σ(I)
R _int = 0.072
3 standard reflections every 166 min intensity decay: 3%

Refinement

R[F ² > 2σ(F ²)] = 0.061
wR(F ²) = 0.171
S = 0.98
2785 reflections
195 parameters
H-atom parameters constrained
Δρ_max = 0.17 e Å⁻³
Δρ_min = −0.18 e Å⁻³

Data collection: CAD-4 EXPRESS (Enraf–Nonius, 1994 ▶); cell refinement: CAD-4 EXPRESS; data reduction: XCAD4 (Harms & Wocadlo, 1995 ▶); program(s) used to solve structure: SIR2004 (Burla et al., 2005 ▶); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008 ▶); molecular graphics: ORTEP-3 for Windows (Farrugia, 1997 ▶) and Mercury (Macrae et al., 2008 ▶); software used to prepare material for publication: WinGX (Farrugia, 1999 ▶) and publCIF (Westrip, 2010 ▶).

Supplementary Material

Crystal structure: contains datablocks global, I. DOI: 10.1107/S1600536810003119/zl2264sup1.cif

e-66-0o495-sup1.cif^{(17.2KB, cif)}

Structure factors: contains datablocks I. DOI: 10.1107/S1600536810003119/zl2264Isup2.hkl

e-66-0o495-Isup2.hkl^{(134KB, hkl)}

Additional supplementary materials: crystallographic information; 3D view; checkCIF report

Table 1. Hydrogen-bond geometry (Å, °).

D—H⋯A	D—H	H⋯A	D⋯A	D—H⋯A
C3—H3⋯O3ⁱ	0.93	2.51	3.191 (4)	130
C5—H5⋯O4ⁱⁱ	0.93	2.57	3.387 (5)	147
C10—H10B⋯O2ⁱⁱⁱ	0.96	2.71	3.535 (5)	145

Open in a new tab

Symmetry codes: (i) Inline graphic ; (ii) ; (iii) .

Acknowledgments

Financial assistance from the Chemistry Department of Michigan Technological University is acknowledged.

supplementary crystallographic information

Comment

Treatment of 2,2-disubstituted t-butyl β-keto esters with trifluoroacetic acid at room temperature quantitatively generates the corresponding 2,2-disubstituted β-keto acids, which were used to probe the nature of the transition state of their thermal decarboxylation (Logue et al., 1975). Structurally similar indanone-derived β-keto ester derivatives have been prepared recently (Alemán et al., 2007; Elsner et al., 2008; Mouri et al., 2009; Noritake et al., 2008; Rigby & Dixon, 2008; Wang et al., 2006). The directing nature of weak C—H···O H-bonds has been noted to be of importance to afford the three dimensional structure observed in these kinds of molecules (Karle et al., 2009).

In this contribution we present the solid state structure of one such 2,2-disubstituted β-keto acid, i.e. the title compound being the 4-nitrophenyl derivative, and its structure is compared with those of a series of other such compounds with different substitutents in the para-position of the phenyl ring.

The title compound, C₁₅H₁₉N₁O₅, which is the final compound in a series of four (Crosse et al., 2010; Gould et al., 2010; Logue et al., 2010), is bent and has a dihedral angle between the mean planes of the phenyl ring and the ester functionality of 61.8 (2)°. The low value of the dihedral angle, 0.8 (2)°, between the mean planes for the nitro group and the phenyl ring suggests coplanarity. Each molecule is bonded to four adjacent molecules by weak C—H···O hydrogen bonding interactions. Both phenyl H-atoms ortho to the ketone O-atom form C—H···O hydrogen bonds with keto O atoms of two neighboring molecules (of the keto and ester groups, respectively), and the two other interactions involve H-atoms on the dimethyl group displaying C—H···O interactions with the O-atoms on the nitro groups, Fig. 3. These four interactions for each molecule result in two-dimensional sheets with a hydrophilic interior held together by weak H-bonded interactions and a hydrophobic exterior composed of protruding methyl groups (from the t-butyl moiety) which interact with the same on adjacent sheets, Fig. 4. This arrangement seems to result in a more tightly packed arrangement of molecules than in the other three derivatives, which without the nitro group as another acceptor for C—H···O interactions form only C—H···O bonded chains rather than layers and this might also be the reason why the density at 1.228 g/cm^-3 is greatest for the title compound compared to the other three molecules which range from 1.108—1.194 g/cm^-3.

The four structures studied which differ only in the substituent on the para-position of the phenyl ring of the title compound, H–, (Logue et al., 2010), CH₃–, (Gould et al., 2010), Cl-, (Crosse et al., 2010), and NO₂–, (this paper) are structurally very similar and there are no significant differences in the bonding distances or bond angle measurements in these four complexes. They do however display some conformational flexibility which are expressed by the slight variations of the torsion angles of the t-butyl oxopropanoate unit, listed in Table 2 (the common atom numbering used for all four atoms is given in Figure 2). Individually these angles vary by only small amounts, the largest variation is observed for 2—1—7—8 (the torsion angle between the phenyl ring and the plane of the keto functionality) wihich differs by 35° between the NO₂- and the CH₃- compound with -154.6 (3) and +170.4 (2) °, respectively. The maximum deviation for the next two torsion angles along the C(=O)—C—C(=O)—O—C backbone are with 17.22 (for 1—7—8—11) and 11.42 (for 7—8—11—O3) still significant. The last of these four torsion angles (8—11—O3—12), shows no significant variation between the four compounds.

The similarity of the torsion angles leads for all four compounds to a similar molecular geometry. They are all bent and the t-butyl 2,2-dimethyl units are folding back on the phenyl moiety with angles between the two units between 61.8 (2) and 75.3 (1)° at the extreme for the NO₂– and CH₃– substituted derivatives. The variations of the torsional angles result however in slightly different conformations for the four molecules, as can be seen in overlays between the various molecules as shown in Figs. 5 to 10. In all figures the six phenyl C-atoms in the two molecules depicted were positioned on top of one another in the overlay using the program Mercury (Macrae et al., 2008). The figures depict overlays of the H–derivative (in red) with one of the molecules containing a CH₃–substituent Fig. 5, Cl- Fig. 6 and NO₂– group Fig. 7 (each in blue); the CH₃–substituent (red) overlayed with Cl- (blue), Fig. 8 and the NO₂–group (blue), Fig. 9 and the Cl– (red) and NO₂–derivative (blue) overlay, Fig 10.

The effect of the torsional angle defined as 2—1—7—8 is then apparent as this displays the greatest variation among the other selected torsional angles listed in Table 2. As discussed above, the greatest difference in this angle occurs between the CH₃– and the NO₂–derivative, Fig. 9, and in this drawing the t-butyl groups display the greatest separation compared to the others. On the other hand the overlay displayed in Fig. 7 featuring the H– and NO₂– derivatives show the largest overlap between the two molecules with equivalent 2—1—7—8 torsional angles of -160.6 (2) and -154.6 (3)°.

These different conformations and the resultant shapes necessarily lead to different packing of the molecules, caused by different combinations of weak C-H···O interactions. These result in infinite chains of vastly different linkage arrangements in the case of the H–, (Logue et al., 2010), CH₃–, (Gould et al., 2010), and Cl-, (Crosse et al., 2010), derivatives and a 2-dimensional sheet for the NO₂– derivative (this paper). One constant theme in all of these structures is the acidity of one of the hydrogen atoms in the dimethyl moiety as one of the H atoms is involved in hydrogen bonding in all of them as is the case for other β-keto esters (Alemán et al., 2007; Elsner et al., 2008; Mouri et al., 2009; Noritake et al., 2008; Rigby & Dixon, 2008; Wang et al., 2006).

Experimental

Crystals of the material were synthesized as reported earlier and were grown by evaporation of a solution in hexane (Logue, 1974). M.p. 605-610 K. IR (KBr pellet, cm^-1): 3113, 2986, 2937 (m, C—H), 1734 (v.s., ester C=O), 1687 (v.s., ketone C=O) 1601 (m, C—C), 1524 (v.s., NO₂), 1458 (m), 1389 (m), 1369 (s), 1345 (v.s., NO₂), 1282 (s, alkyl methyl C—H), 1254 (s), 1152 (v.s., ester C—O), 989 (s), 932 (m), 847 (s, C—H bend), 721 (s). ¹H NMR (CDCl₃) δ: 1.28 (s, 9H), 1.50 (s, 6H), 7.99 (d, 2H, J=9.2 Hz), 8.24 (d, 2H, J=9.2 Hz). ¹³C NMR (CDCl₃) δ: 23.8, 27.8, 54.6, 82.6, 129.9, 130.9, 140.5, 150.1, 173.4, 196.9.

Figures

Fig. 1. — ORTEP-3 (Farrugia, 1997) drawing of the title compound with displacement ellipsoids drawn at the 50% probability level.

Fig. 2. — Labelling of the atoms for the purposes of defining the equivalent torsional angles in Table 2.

Fig. 3. — A Mercury (Macrae et al., 2008) illustration of the packing of the title compound depicting the H-bonded linkages to four adjacent molecules using blue dashed lines.

Fig. 4. — An expansion of the unit cell packing produced with Mercury (Macrae et al., 2008) depicting the nature of the weak H-bonded interactions illustrated with blue dashed lines and the relationships between non-interacting sheets looking down the c-axis.

Fig. 5. — Overlay of molecules produced with Mercury (Macrae et al., 2008) with H– (red), (Logue et al., 2010) and CH3– (blue), (Gould et al., 2010) as substituents on the para position of the phenyl ring.

Fig. 6. — Overlay of molecules produced with Mercury (Macrae et al., 2008) with H–(red), (Logue et al., 2010) and Cl–(blue), (Crosse et al., 2010) as substituents on the para position of the phenyl ring.

Fig. 7. — Overlay of molecules produced with Mercury (Macrae et al., 2008) with H–(red), (Logue et al., 2010) as the substituent on the para position of the phenyl ring and the title compound (blue).

Fig. 8. — Overlay of almost isosteric molecules produced with Mercury (Macrae et al., 2008) with CH3–(red), (Gould et al., 2010) and Cl–(blue), (Crosse et al., 2010) as substituents on the para position of the phenyl ring.

Fig. 9. — Overlay of almost isosteric molecules produced with Mercury (Macrae et al., 2008) with CH~3~–(red), (Gould et al., 2010) as the substituent on the para position of the phenyl ring and the title compound (blue).

Fig. 10. — Overlay of almost isosteric molecules produced with Mercury (Macrae et al., 2008) with Cl–(red), (Crosse et al., 2010) as the substituent on the para position of the phenyl ring and the title compound (blue).