Bromido[(1,2,5,6-η)-cyclo­octa-1,5-diene]methyl­platinum(II)

Abstract

In the title complex, [PtBr(CH₃)(C₈H₁₂)], the Pt^II ion is in a distorted square-planar environment defined by the Br and methyl C atoms and the mid-points of the two π-coordinated double bonds of cyclo­octa-1,5-diene. As a result of the different trans influences of the Br atom and the methyl group, the Pt—C bonds trans to the methyl group [2.262 (11) and 2.261 (10) Å] are longer than those trans to the Br atom [2.118 (8) and 2.138 (9) Å].

Related literature

For the crystal structure of [(cod)PtCl₂] (cod = cyclo­octa-1,5-diene), see: Goel et al. (1982 ▶); Syed et al. (1984 ▶). For the crystal structures of [(cod)Pt(CH₃)L] (L = OH, CH₃ or Cl), see: Klein et al. (1999 ▶). For the crystal structure of [(cod)Pt(CH₃)I], see: Nieger (2008 ▶). For related Pt–cot complexes, [(cot )PtX ₂] (cot = cyclo­octa-1,3,5,7-tetra­ene; X = Br or I), see: Song et al. (2007a ▶,b ▶).

Experimental

Crystal data

• [PtBr(CH₃)(C₈H₁₂)]

• M _r = 398.21

• Orthorhombic,

• a = 7.1013 (15) Å

• b = 11.184 (2) Å

• c = 12.691 (3) Å

• V = 1007.9 (4) ų

• Z = 4

• Mo Kα radiation

• μ = 17.82 mm⁻¹

• T = 296 K

• 0.25 × 0.22 × 0.12 mm

Data collection

• Bruker SMART 1000 CCD diffractometer

• Absorption correction: multi-scan (SADABS; Bruker, 2007 ▶) T _min = 0.537, T _max = 1.000

• 7369 measured reflections

• 2514 independent reflections

• 1988 reflections with I > 2σ(I)

• R _int = 0.041

Refinement

• R[F ² > 2σ(F ²)] = 0.032

• wR(F ²) = 0.067

• S = 1.04

• 2514 reflections

• 101 parameters

• H-atom parameters constrained

• Δρ_max = 0.92 e Å⁻³

• Δρ_min = −1.27 e Å⁻³

• Absolute structure: Flack (1983 ▶), 1023 Friedel pairs

• Flack parameter: −0.02 (3)

Data collection: SMART (Bruker, 2007 ▶); cell refinement: SAINT (Bruker, 2007 ▶); data reduction: SAINT; program(s) used to solve structure: SHELXTL (Sheldrick, 2008 ▶); program(s) used to refine structure: SHELXTL; molecular graphics: ORTEP-3 (Farrugia, 1997 ▶); software used to prepare material for publication: SHELXTL.

Supplementary Material

Additional supplementary materials: crystallographic information; 3D view; checkCIF report

supplementary crystallographic information

Comment

In the title complex, [PtBr(CH₃)(C₈H₁₂)], the central Pt^II ion lies in a distorted square-planar environment defined by the Br and methyl C atoms and the two mid-points (M1, M2) of the π-coordinated double bonds of cycloocta-1,5-diene (cod) ligand (M1 and M2 denote the mid-points of the olefinic bonds C1—C2 and C5—C6, respectively) (Fig. 1). The Pt, Br, C9 atoms and the mid-points lie in a coordination plane with the largest deviation of 0.018 Å (M2) from the least-squares plane, and with bond angles in the range of 85.4°–94.5°. Because of the different trans influences of the Br atom and the methyl group, the Pt—C bonds trans to C9 of the methyl group (2.261 (10)–2.262 (11) Å) are longer than those trans to the Br atom (2.118 (8)–2.138 (9) Å). The cod ligand coordinates to the Pt atom in the twist-boat conformation with the coordinated double-bond lengths of 1.334 (13) and 1.367 (14) Å, and the cod ring angles lie in the range of 115.1 (10)°–127.3 (9)°.

Experimental

To a solution of cyclooctadienedimethylplatinum(II) (0.1677 g, 0.503 mmol) in CH₂Cl₂/MeOH (15 ml/15 ml) was added acetyl bromide (0.0740 g, 0.602 mmol), and stirred for 5 h at room temperature. The solvent was removed under vacuum, the residue was washed with pentane and dried, to give a white powder (0.1611 g). Crystals suitable for X-ray analysis were obtained by slow evaporation from a methanol solution.

Refinement

H atoms were positioned geometrically and allowed to ride on their respective parent atoms [C—H = 0.98 (CH), 0.97 (CH₂) or 0.96 (CH₃) Å and U_iso(H) = 1.2U_eq(C) or 1.5U_eq(methyl C)]. The highest peak (0.92 e Å^-3) and the deepest hole (-1.27 e Å^-3) in the difference Fourier map are located 0.95 and 0.56 Å from the atoms Pt1 and Br1, respectively.

Figures

Fig. 1.

The structure of the title compound, with displacement ellipsoids drawn at the 30% probability level for non-H atoms.

Crystal data

[PtBr(CH3)(C8H12)]	F(000) = 728
Mr = 398.21	Dx = 2.624 Mg m−3
Orthorhombic, P212121	Mo Kα radiation, λ = 0.71073 Å
Hall symbol: P 2ac 2ab	Cell parameters from 3683 reflections
a = 7.1013 (15) Å	θ = 2.4–28.4°
b = 11.184 (2) Å	µ = 17.82 mm−1
c = 12.691 (3) Å	T = 296 K
V = 1007.9 (4) Å3	Block, colourless
Z = 4	0.25 × 0.22 × 0.12 mm

Data collection

Bruker SMART 1000 CCD diffractometer	2514 independent reflections
Radiation source: fine-focus sealed tube	1988 reflections with I > 2σ(I)
graphite	Rint = 0.041
ω scans	θmax = 28.5°, θmin = 2.4°
Absorption correction: multi-scan (SADABS; Bruker, 2007)	h = −8→9
Tmin = 0.537, Tmax = 1.000	k = −15→8
7369 measured reflections	l = −15→16

Refinement

Refinement on F2	Secondary atom site location: difference Fourier map
Least-squares matrix: full	Hydrogen site location: inferred from neighbouring sites
R[F2 > 2σ(F2)] = 0.032	H-atom parameters constrained
wR(F2) = 0.067	w = 1/[σ2(Fo2) + (0.0196P)2] where P = (Fo2 + 2Fc2)/3
S = 1.04	(Δ/σ)max < 0.001
2514 reflections	Δρmax = 0.92 e Å−3
101 parameters	Δρmin = −1.27 e Å−3
0 restraints	Absolute structure: Flack (1983), 1023 Friedel pairs
Primary atom site location: structure-invariant direct methods	Flack parameter: −0.02 (3)

Special details

Geometry. All e.s.d.'s (except the e.s.d. in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell e.s.d.'s are taken into account individually in the estimation of e.s.d.'s in distances, angles and torsion angles; correlations between e.s.d.'s in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell e.s.d.'s is used for estimating e.s.d.'s involving l.s. planes.

Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > σ(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R- factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Ų)

	x	y	z	Uiso*/Ueq
Pt1	0.14514 (4)	0.09470 (4)	0.38595 (2)	0.03996 (10)
Br1	−0.13276 (14)	0.10500 (13)	0.27310 (7)	0.0679 (3)
C1	0.0998 (13)	−0.1007 (10)	0.4243 (7)	0.052 (2)
H1	0.0112	−0.1408	0.3768	0.063*
C2	0.0164 (14)	−0.0373 (11)	0.5001 (7)	0.059 (3)
H2	−0.1215	−0.0403	0.5006	0.071*
C3	0.109 (2)	−0.0160 (13)	0.6061 (8)	0.091 (4)
H3A	0.0092	−0.0039	0.6575	0.110*
H3B	0.1742	−0.0887	0.6258	0.110*
C4	0.2370 (16)	0.0801 (14)	0.6157 (9)	0.091 (4)
H4A	0.3361	0.0563	0.6640	0.109*
H4B	0.1715	0.1472	0.6474	0.109*
C5	0.3254 (13)	0.1214 (11)	0.5168 (7)	0.066 (3)
H5	0.3742	0.2032	0.5213	0.079*
C6	0.4194 (13)	0.0527 (11)	0.4448 (9)	0.060 (3)
H6	0.5218	0.0947	0.4086	0.072*
C7	0.4495 (15)	−0.0771 (15)	0.4554 (9)	0.082 (4)
H7A	0.4850	−0.0929	0.5279	0.098*
H7B	0.5562	−0.0985	0.4116	0.098*
C8	0.2914 (17)	−0.1587 (11)	0.4282 (9)	0.083 (4)
H8A	0.2879	−0.2229	0.4795	0.099*
H8B	0.3171	−0.1943	0.3600	0.099*
C9	0.2351 (11)	0.2549 (9)	0.3069 (7)	0.043 (2)
H9A	0.3702	0.2569	0.3041	0.064*
H9B	0.1900	0.3235	0.3447	0.064*
H9C	0.1854	0.2558	0.2365	0.064*

Atomic displacement parameters (Ų)

	U11	U22	U33	U12	U13	U23
Pt1	0.03947 (15)	0.03876 (19)	0.04166 (15)	−0.0015 (2)	−0.00064 (15)	0.00082 (18)
Br1	0.0593 (5)	0.0812 (9)	0.0631 (5)	0.0112 (9)	−0.0145 (5)	0.0043 (6)
C1	0.062 (6)	0.030 (5)	0.065 (6)	−0.018 (6)	−0.020 (4)	0.009 (5)
C2	0.055 (6)	0.064 (8)	0.059 (6)	−0.017 (6)	0.006 (5)	0.012 (6)
C3	0.130 (11)	0.100 (11)	0.045 (6)	0.011 (10)	0.012 (7)	0.012 (7)
C4	0.079 (7)	0.128 (14)	0.066 (7)	0.002 (10)	−0.021 (6)	−0.017 (11)
C5	0.057 (6)	0.078 (10)	0.063 (6)	−0.004 (7)	−0.025 (5)	−0.024 (6)
C6	0.035 (5)	0.059 (8)	0.086 (7)	−0.008 (5)	−0.013 (5)	0.009 (6)
C7	0.060 (6)	0.095 (12)	0.089 (8)	0.020 (9)	−0.017 (6)	−0.003 (9)
C8	0.106 (10)	0.045 (8)	0.097 (9)	0.009 (8)	−0.006 (7)	0.006 (7)
C9	0.038 (4)	0.029 (6)	0.061 (5)	−0.008 (5)	0.004 (4)	0.007 (5)

Geometric parameters (Å, °)

Pt1—C5	2.118 (8)	C4—H4A	0.9700
Pt1—C6	2.138 (9)	C4—H4B	0.9700
Pt1—C9	2.151 (9)	C5—C6	1.367 (14)
Pt1—C2	2.261 (10)	C5—H5	0.9800
Pt1—C1	2.262 (11)	C6—C7	1.473 (18)
Pt1—Br1	2.4410 (11)	C6—H6	0.9800
C1—C2	1.334 (13)	C7—C8	1.488 (17)
C1—C8	1.508 (14)	C7—H7A	0.9700
C1—H1	0.9800	C7—H7B	0.9700
C2—C3	1.515 (13)	C8—H8A	0.9700
C2—H2	0.9800	C8—H8B	0.9700
C3—C4	1.415 (17)	C9—H9A	0.9600
C3—H3A	0.9700	C9—H9B	0.9600
C3—H3B	0.9700	C9—H9C	0.9600
C4—C5	1.478 (14)
C5—Pt1—C6	37.5 (4)	C5—C4—H4A	108.3
C5—Pt1—C9	93.9 (4)	C3—C4—H4B	108.3
C6—Pt1—C9	94.3 (4)	C5—C4—H4B	108.3
C5—Pt1—C2	80.5 (4)	H4A—C4—H4B	107.4
C6—Pt1—C2	90.1 (4)	C6—C5—C4	126.8 (12)
C9—Pt1—C2	164.3 (4)	C6—C5—Pt1	72.1 (5)
C5—Pt1—C1	93.1 (4)	C4—C5—Pt1	111.4 (7)
C6—Pt1—C1	80.9 (4)	C6—C5—H5	113.1
C9—Pt1—C1	161.4 (4)	C4—C5—H5	113.1
C2—Pt1—C1	34.3 (3)	Pt1—C5—H5	113.1
C5—Pt1—Br1	160.4 (3)	C5—C6—C7	124.3 (11)
C6—Pt1—Br1	162.1 (3)	C5—C6—Pt1	70.4 (5)
C9—Pt1—Br1	85.8 (2)	C7—C6—Pt1	112.3 (7)
C2—Pt1—Br1	94.6 (2)	C5—C6—H6	114.0
C1—Pt1—Br1	93.3 (2)	C7—C6—H6	114.0
C2—C1—C8	127.3 (9)	Pt1—C6—H6	114.0
C2—C1—Pt1	72.8 (7)	C6—C7—C8	118.3 (10)
C8—C1—Pt1	107.1 (7)	C6—C7—H7A	107.7
C2—C1—H1	113.7	C8—C7—H7A	107.7
C8—C1—H1	113.7	C6—C7—H7B	107.7
Pt1—C1—H1	113.7	C8—C7—H7B	107.7
C1—C2—C3	122.1 (10)	H7A—C7—H7B	107.1
C1—C2—Pt1	72.9 (6)	C7—C8—C1	115.1 (10)
C3—C2—Pt1	107.0 (8)	C7—C8—H8A	108.5
C1—C2—H2	115.5	C1—C8—H8A	108.5
C3—C2—H2	115.5	C7—C8—H8B	108.5
Pt1—C2—H2	115.5	C1—C8—H8B	108.5
C4—C3—C2	118.3 (10)	H8A—C8—H8B	107.5
C4—C3—H3A	107.7	Pt1—C9—H9A	109.5
C2—C3—H3A	107.7	Pt1—C9—H9B	109.5
C4—C3—H3B	107.7	H9A—C9—H9B	109.5
C2—C3—H3B	107.7	Pt1—C9—H9C	109.5
H3A—C3—H3B	107.1	H9A—C9—H9C	109.5
C3—C4—C5	116.0 (10)	H9B—C9—H9C	109.5
C3—C4—H4A	108.3
C5—Pt1—C1—C2	68.1 (6)	C9—Pt1—C5—C6	−92.0 (7)
C6—Pt1—C1—C2	103.7 (6)	C2—Pt1—C5—C6	102.8 (7)
C9—Pt1—C1—C2	−179.9 (9)	C1—Pt1—C5—C6	70.7 (7)
Br1—Pt1—C1—C2	−93.3 (5)	Br1—Pt1—C5—C6	179.4 (7)
C5—Pt1—C1—C8	−56.6 (7)	C6—Pt1—C5—C4	−123.3 (13)
C6—Pt1—C1—C8	−21.0 (7)	C9—Pt1—C5—C4	144.7 (9)
C9—Pt1—C1—C8	55.4 (13)	C2—Pt1—C5—C4	−20.6 (9)
C2—Pt1—C1—C8	−124.7 (9)	C1—Pt1—C5—C4	−52.6 (9)
Br1—Pt1—C1—C8	142.0 (7)	Br1—Pt1—C5—C4	56.1 (15)
C8—C1—C2—C3	−0.9 (18)	C4—C5—C6—C7	−0.5 (16)
Pt1—C1—C2—C3	−99.6 (10)	Pt1—C5—C6—C7	−104.2 (10)
C8—C1—C2—Pt1	98.8 (11)	C4—C5—C6—Pt1	103.7 (9)
C5—Pt1—C2—C1	−110.0 (6)	C9—Pt1—C6—C5	90.8 (7)
C6—Pt1—C2—C1	−73.7 (6)	C2—Pt1—C6—C5	−74.1 (7)
C9—Pt1—C2—C1	179.9 (11)	C1—Pt1—C6—C5	−107.3 (8)
Br1—Pt1—C2—C1	89.1 (5)	Br1—Pt1—C6—C5	−179.4 (8)
C5—Pt1—C2—C3	9.2 (8)	C5—Pt1—C6—C7	120.0 (12)
C6—Pt1—C2—C3	45.6 (8)	C9—Pt1—C6—C7	−149.1 (9)
C9—Pt1—C2—C3	−60.9 (16)	C2—Pt1—C6—C7	45.9 (9)
C1—Pt1—C2—C3	119.2 (10)	C1—Pt1—C6—C7	12.7 (9)
Br1—Pt1—C2—C3	−151.7 (8)	Br1—Pt1—C6—C7	−59.4 (15)
C1—C2—C3—C4	84.4 (16)	C5—C6—C7—C8	79.3 (14)
Pt1—C2—C3—C4	4.3 (14)	Pt1—C6—C7—C8	−1.6 (14)
C2—C3—C4—C5	−22.8 (17)	C6—C7—C8—C1	−17.9 (16)
C3—C4—C5—C6	−53.1 (15)	C2—C1—C8—C7	−54.7 (15)
C3—C4—C5—Pt1	30.0 (14)	Pt1—C1—C8—C7	26.4 (12)