N-(4-Chloro­phenyl)-N′-(4-methyl­phen­yl)succinamide

B S Saraswathi; Sabine Foro; B Thimme Gowda

doi:10.1107/S1600536811032740

. 2011 Aug 27;67(Pt 9):o2419. doi: 10.1107/S1600536811032740

N-(4-Chlorophenyl)-N′-(4-methylphenyl)succinamide

B S Saraswathi ^a, Sabine Foro ^b, B Thimme Gowda ^a,^*

PMCID: PMC3200890 PMID: 22059003

Abstract

The asymmetric unit of the title compound, C₁₇H₁₇ClN₂O₂, contains one half-molecule with a center of symmetry at the mid-point of the central C—C bond. The dihedral angle between the benzene ring and the adjacent NH—C(O)—CH₂ group is 39.9 (1)°. The methyl and Cl groups are disordered with respect to the para-positions of the benzene ring, with site-occupation factors of 0.5 each. In the crystal, intermolecular N—H⋯O hydrogen bonds link the molecules into chains parallel to the baxis.

Related literature

For our studies on the effects of substituents on the structures of N-(aryl)-amides, see: Arjunan et al. (2004 ▶); Bhat & Gowda (2000 ▶); Saraswathi et al. (2011 ▶), on N-(aryl)-methanesulfonamides, see: Gowda et al. (2007 ▶) and on arylsulfonamides, see: Gowda et al. (2003 ▶). For a similar structure, see Pierrot et al. (1984 ▶). For restrained geometry, see: Nardelli (1999 ▶).

Experimental

Crystal data

C₁₇H₁₇ClN₂O₂
M _r = 316.78
Monoclinic,
a = 17.305 (3) Å
b = 4.8446 (6) Å
c = 9.726 (1) Å
β = 101.58 (2)°
V = 798.79 (19) Å³
Z = 2
Mo Kα radiation
μ = 0.25 mm⁻¹
T = 293 K
0.46 × 0.36 × 0.20 mm

Data collection

Oxford Diffraction Xcalibur diffractometer with Sapphire CCD detector
Absorption correction: multi-scan (CrysAlis RED; Oxford Diffraction, 2009 ▶) T _min = 0.895, T _max = 0.952
2538 measured reflections
1452 independent reflections
1103 reflections with I > 2σ(I)
R _int = 0.009

Refinement

R[F ² > 2σ(F ²)] = 0.048
wR(F ²) = 0.131
S = 1.03
1452 reflections
112 parameters
16 restraints
H atoms treated by a mixture of independent and constrained refinement
Δρ_max = 0.21 e Å⁻³
Δρ_min = −0.21 e Å⁻³

Data collection: CrysAlis CCD (Oxford Diffraction, 2009 ▶); cell refinement: CrysAlis RED (Oxford Diffraction, 2009 ▶); data reduction: CrysAlis RED; program(s) used to solve structure: SHELXS97 (Sheldrick, 2008 ▶); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008 ▶); molecular graphics: PLATON (Spek, 2009 ▶); software used to prepare material for publication: SHELXL97.

Supplementary Material

Crystal structure: contains datablock(s) I, global. DOI: 10.1107/S1600536811032740/ds2134sup1.cif

e-67-o2419-sup1.cif^{(14.8KB, cif)}

Structure factors: contains datablock(s) I. DOI: 10.1107/S1600536811032740/ds2134Isup2.hkl

e-67-o2419-Isup2.hkl^{(71.7KB, hkl)}

Additional supplementary materials: crystallographic information; 3D view; checkCIF report

Table 1. Hydrogen-bond geometry (Å, °).

D—H⋯A	D—H	H⋯A	D⋯A	D—H⋯A
N1—H1N⋯O1ⁱ	0.85 (2)	2.11 (2)	2.918 (2)	160 (2)

Open in a new tab

Symmetry code: (i) Inline graphic .

Acknowledgments

BSS thanks the University Grants Commission, Government of India, New Delhi, for the award of a research fellowship under its faculty improvement program.

supplementary crystallographic information

Comment

The amide and sulfonamide moieties are important constituents of many biologically significant compounds. As part of our studies on the substituent effects on the structures and other aspects of N-(aryl)-amides (Arjunan et al., 2004; Bhat & Gowda, 2000; Saraswathi et al., 2011), N-(aryl)-methanesulfonamides (Gowda et al., 2007) and arylsulfonamides(Gowda et al., 2003), in the present work, the structure of N-(4-Chlorophenyl),N-(4-methylphenyl)-succinamide (I) has been determined (Fig.1). The asymmetric unit of (I) contains half a molecule with a center of symmetry at the mid-point of the central C—C bond, similar to that obseved in bis(2-chlorophenylaminocarbonylmethyl)disulfide (II)(Pierrot et al., 1984), N-(3-Chlorophenyl),N-(3-methylphenyl)- succinamide (III) (Saraswathi et al., 2011)

The conformations of the amide O atoms are anti to the H atoms attached to the adjacent C atoms.

The dihedral angle between the benzene ring and the NH—C(O)—CH₂ segment in the two halves of the molecule is 39.9 (1)°, compared to the value of 43.5 (1)° in (III).

The packing of molecules in the crystal linked by of N—H···O hydrogen bonds (Table 1) is shown in Fig. 2.

Experimental

Succinic anhydride (0.01 mol) in toluene (25 ml) was treated drop wise with 4-chloroaniline (0.01 mol) also in toluene (20 ml) with constant stirring. The resulting mixture was stirred for one hour and set aside for an additional hour at room temperature for completion of the reaction. The mixture was then treated with dilute hydrochloric acid to remove unreacted 4-chloroaniline. The resultant solid N-(4-chlorophenyl)-succinamic acid was filtered under suction and washed thoroughly with water to remove the unreacted succinic anhydride and succinic acid. The compound was recrystallized to constant melting point from ethanol. The purity of the compound was checked by elemental analysis and characterized by its infrared and NMR spectra.

The N-(4-chlorophenyl)succinamic acid obtained was then treated with phosphorous oxychloride and excess of 4-methylaniline at room temperature with constant stirring. The resultant mixture was stirred for 4 h, kept aside for additional 6 h for completion of the reaction and poured slowly into crushed ice with constant stirring. It was kept aside for a day. The resultant solid, N-(4-chlorophenyl), N-(4-methylphenyl)-succinamide was filtered under suction, washed thoroughly with water, dilute sodium hydroxide solution and finally with water. It was recrystallized to constant melting point from a mixture of acetone and toluene (3:1 v/v). The compound was characterized by its infrared and NMR spectra.

Rod like colorless single crystals used in X-ray diffraction studies were grown in a mixture of acetone and toluene (3:1 v/v) at room temperature.