Periprosthetic Bone Remodeling after 12 Years Differs in Cemented and Uncemented Hip Arthroplasties

Abstract

Background

Different patterns of stress shielding may lead to differences in periprosthetic bone preservation around cemented and uncemented hips in the long term?

Questions/purposes

The purpose of this study is to compare the difference in periprosthetic bone density between cemented Charnley total hip and uncemented hydroxyapatite-coated Furlong^® THAs at a minimum followup of 12 years (mean, 16 years; range, 12–24 years).

Methods

We studied a cohort of 17 patients who had bilateral THAs with a cemented Charnley THA on one side and an uncemented Furlong^® hydroxyapatite-coated THA on the other side. At a minimum followup of 12 years, Harris and Oxford hip scores were used to determine the function, and dual-energy x-ray absorptiometry was used to quantify bone mineral density adjacent to the prosthesis. The results of the dual-energy x-ray absorptiometry scan for cemented and uncemented hips were analyzed using paired-sample two-tailed t-tests. To compare the Harris hip scores, a nonparametric Wilcoxon test was used.

Results

Bone mineral density was higher on the uncemented Furlong^® side in Gruen Zones 2, 3, 5, and 6 of the proximal femur and DeLee and Charnley Zone 1 of the acetabulum. In all other zones, there was no difference. Comparison of Harris and Oxford hip scores showed no differences between the two hips.

Conclusion

Bone density is better preserved around the uncemented hydroxyapatite-coated Furlong^® stem compared with the Charnley cemented stem.

Level of Evidence

Level III, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Introduction

Periprosthetic bone behavior is complex and poorly understood. Numerous studies have enumerated various patterns of bone remodeling around cemented or uncemented hip prostheses. There exists a major difference in bone remodeling between them [1, 8, 11, 13, 21]. Alterations of the physiologic stresses around the hip contribute to the development of subsequent adaptive remodeling to determine the quality of the periprosthetic bone. Preoperative bone density and mechanical characteristics of the implant, which includes stiffness, rigidity, load transmission characteristics, and the surface coating of the prosthesis determine the homeostasis of the remodeled periprosthetic bone [3, 13, 16].

Commonly, there is a loss of 10% to 45% of the periprosthetic bone mass during the first years after THA. Studies have suggested this bone loss is not necessarily progressive and some degree of restoration of bone density around implants occurs usually by 2 years [13, 19]. However, some studies have shown up to 40% loss in average bone mineral content inside the lesser trochanter and 28% loss in average bone mineral content 4.8 cm distal to the lesser trochanter in the medial cortex. The data suggest that the loss in mineral content may progress and could account for as much as a 50% decrease in bone mass in the long term [17]. The quality of periprosthetic bone determines the risk of periprosthetic fracture and also defines the complexity of revision surgery if needed. Better periprosthetic bone preservation can decrease the need for complex reconstruction. Most studies reporting bone remodeling around cemented or uncemented hip prostheses do not make a direct comparison between them. Studying the long-term difference in periprosthetic bone density between the cemented or uncemented hip prostheses could help in choosing the bone-preserving prosthesis for hip arthroplasty.

Dual-energy x-ray absorptiometry (DEXA) scans have been widely accepted as a reliable tool with high reproducibility to quantify bone mineral density (BMD) changes adjacent to a THA [20]. It is a precise and an accurate method of measurement for small changes in BMD around femoral implants [4, 13–15, 26, 27].

We studied a cohort of patients who had bilateral THAs with a cemented Charnley prosthesis on one side and an uncemented hydroxyapatite (HA)-coated Furlong^® (JRI Limited, London, UK) prosthesis on the other side. The aims of this study were (1) to compare the difference in periprosthetic bone density between cemented Charnley and uncemented HA-coated Furlong^® prostheses at a minimum followup of 12 years (range, 12–24 years); (2) to assess if differences in periprosthetic bone density were associated with differences in Harris or Oxford hip scores; and (3) to compare radiographic signs of loosening.

Patients and Methods

Between 1980 and 1994, 22 patients had bilateral hip arthroplasties with the cemented Charnley prosthesis on one side and an uncemented Furlong^® prosthesis on the other side. The Furlong^® prosthesis is fully HA-coated, and the coating is applied by plasma spray with thickness of 200 μm and bond strength of 40 Mpa. All surgeries were performed by two senior authors (MA, JGB) using a similar technique. At the time of study, five patients had died and 17 were alive and were invited to participate in the study. Seven of the patients were males. The mean age of all patients at the time of assessment was 78 years (range, 62–93 years). The average time from cemented hip arthroplasty to assessment was 18 years (range, 13–24 years), and the time from uncemented hip arthroplasty to assessment was 14 years (range, 12–17 years) (Table 1). We obtained local and regional ethical committee approval.

Table 1.

Comparative details of cemented and uncemented THAs*

Details	Minimum	Maximum	Mean	Standard deviation
Age of patient at time of uncemented operation	54.4	80.3	65.2	7.9
Age of patient at time of cemented operation	38.4	79.4	59.6	9.9
Age of patient at time of scan	61.6	92.7	77.8	8.9
Time between cemented operation and scan	13.3	24.0	18.2	3.4
Time between uncemented operation and scan	12.2	16.8	14.6	2.6

* Data in years.

We clinically assessed all patients by recording Oxford and Harris hip scores. Standardized AP and lateral radiographs were taken. The AP projection was centered on the symphysis pubis and was taken at a standard distance of 1 m. We used Gruen zones [9] for the femoral component and DeLee and Charnley [6] zones for the acetabular component as references. The radiographs were assessed for radiolucent lines, osteolysis, and endosteal bone formation (spot welds) by one observer (PC); pedestal formation was used to assess fixation and stability of the uncemented stem (Fig. 1).

Fig. 1.

A bilateral THA with a cemented Charnley prosthesis on one side and the uncemented HA-coated Furlong^® uncemented prosthesis on the other side is shown.

All patients had DEXA scans of both hips to determine the quality of bone around the prosthesis. We collected data regarding bone density and remodeling patterns. The DEXA scanner used was a GE LUNAR prodigy orthopaedic scanner (GE Medical Systems Lunar, Milwaukee, WI, USA), a narrow-angle fan-beam densitometer. We used validated orthopaedic analysis software (GE Medical Systems Lunar) solely to measure the periprosthetic bone density excluding metal and cement artifacts; Gruen and DeLee-Charnley zones were used as references and were quantified in mg/cm².

We analyzed the results from the DEXA scans using paired-sample two-tailed t-tests. To compare the Harris hip scores, a nonparametric Wilcoxon test was used. Pearson correlations were done to examine the relationship between the bone density measures (averaged for each zone) and the quality-of-life measures.

Results

DEXA scans showed the BMD was significantly higher (p < 0.05) on the Furlong^® side in Gruen Zones 2, 3, 5, and 6 of the proximal femur and DeLee and Charnley Zone 1 of the acetabulum (Table 2). In all other zones, there was no difference. Age was negatively correlated with bone density in Gruen Zones 6 and 7 and acetabular Zones 2 and 3.

Table 2.

Comparison of various zones between two sides (paired-samples t-test)

Zones	Paired differences					Significance (two-tailed)
	Mean	Standard deviation	Standard error mean	95% confidence interval of the difference
				Lower	Upper
Z1 cemented – Z1 uncemented	−0.185	0.404	0.104	−0.409	0.038	0.098
Z2 cemented – Z2 uncemented	−0.261	0.437	0.113	−0.504	−0.019	0.036
Z3 cemented – Z3 uncemented	−0.413	0.516	0.133	−0.699	−0.126	0.008
Z4 cemented – Z4 uncemented	0.106	0.292	0.075	−0.055	0.268	0.180
Z5 cemented – Z5 uncemented	−0.420	0.301	0.077	−0.587	−0.253	0.002
Z6 cemented – Z6 uncemented	−0.410	0.400	0.122	−0.600	−0.120	0.009
Z7 cemented – Z7 uncemented	−0.160	0.599	0.154	−0.492	0.171	0.317
CZ1 cemented – CZ1 uncemented	−0.188	0.146	0.037	−0.269	−0.107	0.004
CZ2 cemented – CZ2 uncemented	0.009	0.220	0.056	−0.112	0.131	0.871
CZ3 cemented – CZ3 uncemented	−0.008	0.285	0.073	−0.166	0.149	0.909

Z = Gruen femoral zones; CZ = DeLee-Charnley acetabular zones.

Comparison of Harris and Oxford hip scores showed no statistically significant difference between the two hips (p = 0.108).

All prostheses were well fixed, which included both stems and the cups on either side. Radiographs showed radiolucent lines in two Gruen zones in two cases around the femur on the cemented Charnley prosthesis side. No osteolysis, loosening, or migration of the prosthesis was seen in any of the hips. In addition, 13 patients in the Furlong^® uncemented group showed endosteal bone formation (spot welds), and pedestal formation was observed in 12.

Discussion

Periprosthetic bone remodeling is complex and poorly defined, particularly with relation to the different cemented or uncemented prostheses currently in use. In our study, the comparative results revealed better preservation of periprosthetic bone with the uncemented HA-coated Furlong^® prosthesis in Gruen Zones 2, 3, 5, and 6 on the femoral side and DeLee and Charnley Zone 1 on the acetabular side when compared with the cemented Charnley prosthesis.

Our study has several limitations. It lacks the baseline preoperative, postoperative BMD, and serial postoperative measurements of bone density; these data would have helped to identify longitudinal long-term changes resulting from the implantation and subsequent remodeling and also helped us to determine if the prosthesis has better preserved or increased the BMD in the periprosthetic region. Our primary aim was to compare the long-term difference in periprosthetic bone density between the cemented and uncemented HA-coated implants and the available data helped us to make that comparison. The followup of the patients who underwent cemented hip arthroplasties is approximately 4 years longer than for the patients who had the uncemented arthroplasties. Theoretically, the cemented hip prostheses have been in place longer and therefore, it might be expected that more bone was lost. Some studies have shown remodeling in the periprosthetic region varies with time and reaches homeostasis by approximately 2 years [1, 10] and few changes are expected later. Our study involves observing long-term homeostasis in bone remodeling and we believe the difference in timing of implantation of cemented and uncemented implants would not skew our results. Age has been found to negatively correlate with bone densities in femoral Zones 6 and 7 and acetabular Zones 2 and 3, suggesting older age is associated with lower bone densities. The small sample size in our study gives little power to detect such relationships. All radiologic observations were made once by one observer (PC), which could introduce interobserver and intraobserver bias and adds to the limitation of the radiologic findings.

There are no long-term studies that directly compare cemented and uncemented periprosthetic bone remodeling. In the short term, up to 4 years [12], studies show that on the femoral side, the cemented prosthesis induced bone mass reduction in the lesser trochanter area and in the distal lateral cortex and with the uncemented stem produced significant bone resorption in the area of the lesser trochanter and in the medial and the lateral distal cortex of the femur; both induced an increase in the bone mass in the greater trochanter area. In comparison, our study showed a different pattern of bone remodeling with greater preservation of bone density in the distal medial and the distal lateral cortex with the uncemented stem. Longitudinal noncomparison studies with Charnley cemented prostheses [5] have observed that at 1 year, there was a reduction in BMD of 6.7% in the calcar region and an increase of 5.3% in the femoral shaft distal to the tip of the implant [22]. Studies with an uncemented HA-coated prosthesis [19] showed that the BMD was lower in Gruen Zones 1 and 7 and concluded prosthesis design influences periprosthetic bone loss. Similar studies with HA-coated ABG prostheses showed bone density values averaged between 96% and 113.8% for Gruen Zones 1 to 6, and in Zone 7, there was a decline to an average of 72.1% at 24 months [24]. In contrast, one study [17] showed a 40% loss of bone proximally and 49% distally at 7 to 14 years [10]. In our study with the HA-coated Furlong^® prosthesis, we observe preservation in the BMD in Gruen Zones 2, 3, 5, and 6 of the proximal femur. The difference in periprosthetic bone density observed in our study could be the result of the mechanical properties and load transmission characteristics of the prosthesis [25]. The femoral stems in the Furlong^® prosthesis transmit load largely in the metaphyseal-diaphyseal region as compared with the Charnley prosthesis, suggesting a stress-related remodeling pattern for long-surviving prostheses.

On the acetabular side, the uncemented socket induced bone resorption at the medial and caudal zones, and the cemented socket showed significantly increased BMD in the cranial zone [12]. Other studies with the cemented acetabular component observed the periacetabular bone mass returned to baseline values at 2 years with a pattern suggesting uniform transmission of load to the acetabulum [5]. Our study showed the BMD was better preserved in DeLee and Charnley Zone 1 of the acetabulum. These observations reflect the difference in load transmission of the different socket designs suggesting a more uniform load distribution with the Charnley cups as compared with the screw-in design of the uncemented Furlong^® cups, which probably had a higher load transmission in Zone 1 [23].

HA coatings induce bony ingrowth onto the surface of the prosthesis; its influence on the periprosthetic BMD is not clear. Although a fully HA-coated stem is expected to induce greater bone apposition, wider trabecular struts, and more connectivity compared with half HA-coated stems [2], or tapered corundum-blasted titanium stems [1], it is not clear if the HA coating has any role in better preserving bone stock, with studies showing good bony integration with uncemented nonbioactive surface implants [7, 18].

With good survival of the HA-coated Furlong^® cup and stem [22], better preservation of periprosthetic bone would potentially make revision surgery less complex and also possibly decrease the risk of periprosthetic fracture. Additional long-term studies of remodeling and periprosthetic bone density between cemented and uncemented implants can help us understand preservation and behavior of periprosthetic bone stock.

Bone density is better preserved around the uncemented HA-coated stem in Gruen Zones 2, 3, 5, and 6 on the femoral side and Zone 1 on the acetabular side compared with the Charnley cemented stem.