Synthesis and anion recognition properties of shape-persistent binaphthyl-containing chiral macrocyclic amides

Abstract

We report on the synthesis and characterization of novel shape-persistent, optically active arylamide macrocycles, which can be obtained using a one-pot methodology. Resolved, axially chiral binol scaffolds, which incorporate either methoxy or acetoxy functionalities in the 2,2' positions and carboxylic functionalities in the external 3,3' positions, were used as the source of chirality. Two of these binaphthyls are joined through amidation reactions using rigid diaryl amines of differing shapes, to give homochiral tetraamidic macrocycles. The recognition properties of these supramolecular receptors have been analyzed, and the results indicate a modulation of binding affinities towards dicarboxylate anions, with a drastic change of binding mode depending on the steric and electronic features of the functional groups in the 2,2' positions.

Introduction

Macrocyclic molecules possessing a high degree of shape persistency act as molecular cages, and the scientific interest for such compounds is certainly increasing [1–4]. Support for this statement arises from consideration in two main areas of interest: (a) the recognition properties towards suitable guests are usually enhanced by limiting the number of conformations accessible to the covalent cyclic structure (resulting in preorganization [5]); (b) shape persistency is a requirement for the formation of organic nanotubes by means of supramolecular organization of macrocycles in the third dimension [6–12].

Amide functionalities are hydrogen-bonding tools of widespread use for the conformational stabilization of nanostructures. Noticeable examples can be found in the field of foldamers [13–14] or in the design of assembled architectures functioning as artificial ion-channel mimics [15]. Amide functionalities are also widely used for their hydrogen bonding capability in the context of anion complexation. Several macrocyclic systems capable of effective anion recognition and discrimination have been previously reported [16–18]. Binol (1,1'-binaphthyl-2,2'-diol) based synthons are popular in the recent literature; given their robustness, they are frequently used to impart or transfer chiral information, not only in the field of asymmetric synthesis and catalysis, but also in materials science [19–24].

During the course of our ongoing efforts dealing with the use of binol-based synthons for the production of functional, oriented nanomaterials and chiroptical sensors [25–30], we have reported on the design, synthesis and characterization of a rigid, optically active tetraamidic macrocycle with recognition capabilities towards anions (Figure 1) [31].

Figure 1.

Structure of the macrocycle (R,R)-1 (top), and synthetic strategies for the production of novel amide-containing, axially chiral macrocycles (bottom).

In fact, macrocycle (R,R)-1 could be obtained efficiently (62% in the macrocyclization step) through a sequential, convergent methodology. It is a 32-membered macrocycle whose cyclic backbone is composed exclusively of sp²-hybridized carbon and nitrogen atoms. An additional internal rigidification of the macrocyclic cavity is given by the presence of stable, six-membered intramolecular hydrogen bonds between the protected (in the form of methyl ether) phenol moieties in the 2,2' positions and the NH protons of the amide functionalities in the neighboring 3,3' positions of the binaphthyl units. Macrocycle (R,R)-1 showed modest binding affinities towards carboxylate anions, yet detectable binding of proper difunctional carboxylates.

We deemed it to be very interesting to increase the availability of hydrogen-bond donors within the macrocycle cavity, and to unlock the hydrogen-bonding capability of the amide NHs to their full potential for anion recognition. The former could in principle be achieved by unmasking the phenolic oxygen atoms in the 2,2' positions of the binaphthyl skeletons. As for the latter, the introduction of another protecting group, sterically and electronically modulating the hydrogen-bond accepting capability of the phenolic oxygen, was needed.

In this paper, we present the exploitation of these strategies, resulting in the synthesis and characterization of three novel binaphthyl-based macrocycles, and the evaluation of their potential as supramolecular receptors for aliphatic bidentate carboxylate anions.

Results and Discussion

Design, synthesis and spectroscopic characterization

Reactions to deprotect the phenolic oxygens, performed directly on (R,R)-1 as a substrate and attempted under various reaction conditions, proved completely unsuccessful with degradation of the macrocyclic structure occurring in all cases. On the basis of the introductory considerations mentioned earlier, we set out to exploit two orthogonal synthetic strategies (Figure 1, bottom): (1) A direct amidation of the carboxylic acids in the 3,3' positions, in the presence of the free phenolic oxygens in the 2,2' positions. Literature precedents for such amidation using aromatic amines in the presence of vicinal phenol moieties (which compete since they are comparable in nucleophilicity with aromatic amines) are rare [32–33]. As already reported [31], test reactions on model compounds gave disappointing results. The use of benzylic amines, more nucleophilic than arylamines, and therefore competing less with the phenolic moieties in the 2,2' positions, was envisaged as a potential solution and was therefore actively pursued. (2) The use of milder (with respect to methyl ether) protecting groups for the phenolic functionalities in the 2,2' positions; we focused on the use of compound 3, bearing acetyl protecting groups, since its synthesis has been reported, and the deprotection of these groups usually occurs under mild basic conditions [34]. Aromatic amines, as in (R,R)-1, could in principle be used.

Preliminary synthetic work was performed on model compounds to test the reaction conditions. Both enantiomerically pure (R)-2 and (R)-3 and racemic (RS)-2 and (RS)-3 were used routinely in the experiments described in the following. Regarding approach (1), direct generation of the carboxylic acid chloride (with SOCl₂, or oxalyl chloride and DMF; method i), followed by reaction with benzylamine (4a) in the presence of Et₃N as the acid scavenger gave compound 5a in excellent yields (93%) after purification by column chromatography (Scheme 1). The yield was higher in our hands than the one previously reported [35].

Scheme 1.

Reagents and conditions: (i) SOCl₂, CHCl₃ or (COCl)₂, DMF, CH₂Cl₂ then amine, Et₃N, CH₂Cl₂ or (ii) CDI, THF.

Alternative one-pot amidation procedures, performed directly with the aromatic carboxylic acid and the benzylic amine (method ii) using carbonyldiimidazole (CDI) [36], successfully used by us in the past [29], were instead less than satisfactory. Both protocols were applied with commercially available monoprotected benzylic diamine 4c; in both cases, however, the desired product 5c could not be isolated. It is likely that the BOC protecting group is not compatible with the presence of the free phenolic groups in our substrates.

Switching to approach (2), when compound 3 was allowed to react with benzylamine (4a) or aniline (4b), only the aryl derivate 6b was obtained in good yield. Compound 6b could be efficiently deprotected under the reported conditions (K₂CO₃/MeOH) to give 5b. When the monoprotected aryl amine 4d was allowed to react with compound 3 using the same reaction conditions, however, compound 6d could not be efficiently synthesized. The low yield obtained in this step discouraged us from pursuing a stepwise methodology for the macrocyclization, which had been used in the case of (R,R)-1 [31].

In order to quickly evaluate the potential of acetyl-protected tetraamidic macrocyles as analogues of (R,R)-1, we proceeded to directly cyclize equimolar amounts of optically pure, resolved (R)-3 (via formation of the corresponding diacyl chloride) and commercially available diaryl amines 8 and 9, under classical high-dilution conditions [13] which were successful for the synthesis of compound 6b. Indeed, homochiral macrocycles (R,R)-10, (R,R)-11 and (R,R)-12 could be isolated after extensive purification by column chromatography, although in disappointingly low yields (0–5% isolated yield, Scheme 2).

Scheme 2.

Structure and synthesis of the macrocycles discussed in this paper.

Furthermore, macrocycle (R,R)-13 could not be isolated at all. The low quantities of macrocycles (R,R)-10 and (R,R)-11 obtained prevented us from exploring the cleavage of the acetyl functionalities.

¹H NMR spectra for all compounds were relatively simple (see Experimental and Supporting Information File 1), reflecting the structural symmetry found in precursors (C₂ molecular symmetry) and in homochiral macrocycles 10–12 (D₂ molecular symmetry). The peaks for the NH proton resonances of the amide functionalities are sharp in S(6)-type [37] hydrogen-bonded systems, such as those between the NH and the neighboring methoxy groups in (R,R)-1 and (R,R)-12. The NH proton resonances, however, could not be assigned either in the series of compounds 5, or in the acetoxy protected compounds 6 and macrocycles 10,11, as they are broad or below the baseline, so as to indicate unlocked (thus potentially more available to incoming guests), conformationally mobile NH groups (Table 1).

Table 1.

Selected chemical shifts for compounds in CDCl₃ (25 °C).^a

Entry	Compound	NH	Binol-H 4,4'b	OCH3	COCH3	OH
1	5a	9.88	8.74	—	—	12.44
2	5b	n. d.c	8.85	—	—	10.31
4	6b	n. d.	8.47	—	1.83	—
5	6d	n. d.	8.46	—	1.84	—
6	(R,R)-10	n. d.	8.58	—	1.82	—
7	(R,R)-11	n. d.	8.58	—	1.83	—
8	(R,R)-12	10.45	9.06	3.32	—	—
9	(R,R)-1	10.00	9.00	3.53	—	—

^aAll spectra recorded at 5–10 mM sample concentration. ^bResonances related to the singlet corresponding to the proton in the 4,4' positions of the binol skeleton. ^cn. d. = broad or not identified.

There are also substantial differences in the resonances of the H 4,4' protons of the binaphthyl skeleton, which are usually most sensitive to variations in the substitution pattern (and thus, in the electronic structure) within the naphthyl systems of the binaphthyl units.

The UV–vis spectra of macrocycles (R,R)-10 and (R,R)-11, recorded in solvents possessing different solvating and hydrogen-bonding abilities (CH₂Cl₂, EtOH), showed little solvent dependence, with λ_max around 230 nm in all cases, and with well-defined shoulders just below 300 nm. Comparison with data available on parent systems [31] reveals that the spectra cannot be explained as the sum of those generated by the two major aromatic chromophoric components (the naphthyl rings of the binaphthyl units and the aryl moieties of the spacing units); electronic communication between them is present (Figure 2).

Figure 2.

UV and CD (EtOH) spectra of macrocycles (R,R)-10, (R,R)-11 and (R,R)-12 in the range 220–400 nm.

It is interesting to note how the spectra of macrocycle (R,R)-12, bearing methoxy protected phenols, showed the most bathochromically shifted shoulder, centered at 320 nm (quite different from (R,R)-10). The CD spectra (in EtOH) show activity associated with all active UV chromophores and more marked activity for the macrocycle (R,R)-10, with exciton couplet signals greater in intensity than the ones of the other macrocycles.

Molecular modeling

Molecular modeling was performed on the structures of macrocycles (R,R)-10, (R,R)-11 and (R,R)-12, and on the hypothetical macrocycle (R,R)-13, in order to have an estimate of macrocyclic cavities, and to gather information on the relative orientation of the functional groups involved in the binding phenomena. Preliminary conformational structures were optimized by using the semiempirical PM3 method [38]. The geometries were then subjected to further refinement by using DFT B3LYP/6-31G(d) methods. In order to locate conformers having the minimum energy, the structures obtained by preliminary optimization were then subjected to molecular dynamics cycles and subsequent reoptimization [28]. The most stable minimized structures of the macrocycles are shown in Figure 3, in which the distances between the four hydrogen atoms of the NH amide groups within each macrocycle are reported (in angstroms).

Figure 3.

Minimized molecular structures of (from top left to bottom left, clockwise): (R,R)-10, (R,R)-11, (R,R)-13 and (R,R)-12 (distances between the H atoms of the NH amide groups are given in angstroms).

The two macrocycles bearing aryloxy ether spacers ((R,R)-10 and (R,R)-12) have a rectangular overall geometry, probably as a consequence of the imposed dihedral angle of the oxygen atom bridges. In fact, the two trifluoromethyl-containing macrocycles ((R,R)-11 and (R,R)-13) have a more square-like geometry, which seems to be associated with the smaller imposed angle of the sp³-hybridized carbon atom in the spacing units. The dimensions of the macrocycles are essentially identical for the homologous sets of (R,R)-11 and (R,R)-13 (14 Å × 15.7 Å), and of (R,R)-10 and (R,R)-12 (12.5 Å × 16.2 Å). In the case of (R,R)-1, the macrocycle cavity is more square-like, with the four amides all at a quite similar distance (ca. 6–7 Å). In the case of 10–13, however, there is a substantial differentiation in distances between the two sets of amide functionalities, those linked to each different binaphthyl unit within the macrocycle. (R,R)-11 and (R,R)-13 possess slightly less distorted molecular conformations in which a C₂ overall molecular symmetry seems to be retained. In fact, the dihedral angles of the binaphthyl units within the macrocycle are identical in the case of (R,R)-11 (76.1°) and of (R,R)-13 (79.5°), whereas they differ slightly in the case of the more distorted (R,R)-10 (70.8 and 72.6°) and (R,R)-12 (85.9 and 85.6°). Molecular modeling does not give clear hints as to why macrocycle (R,R)-13 could not be obtained.

The shortest distances between the symmetry-related NH groups, shown in Figure 3, are compatible with the insertion of either glutarate or succinate. In fact, the calculated dimensions of the two carboxylates are 5.3 Å for succinate and 6.5 Å for glutarate, considering their fully extended conformation. These data rationalize the preference shown in the case of macrocycle 12 for succinate; in detail, they suggest that the binding mode involves two NH groups linked to the same binaphthyl unit, rather than a complexation mode in which the bidentate guests are extended across the cavities of the macrocycles. These findings also explain why, in the presence of bulkier acetoxy groups on the binaphthyl units, this recognition mechanism in 10 and 11 is suppressed and alternative mechanisms take place (see below).

Complexation studies

¹H NMR titration experiments showed that the addition of anionic guests, in the form of their tetrabutylammonium salts, produced progressive chemical-shift variations, along with a broadening of the peaks belonging to the amide NH protons, indicating that these groups were engaged in hydrogen bonding with the carboxylate guests with a fast-exchanging equilibrium on the NMR time scale. Complexation-induced shifts on other resonances of the binaphthyl residues (Figure 4) indicated, as expected, a change of the electronic structure of these units upon complexation; these peaks were used for the calculation of the association constants, by using a 1:1 model equation (see Experimental).

Figure 4.

Aromatic region of the ¹H NMR (CDCl₃, 500 MHz, 25 °C) spectra of macrocycle (R,R)-12 (2.8 mM, bottom) and at the end of the titration with tetrabutylammonium succinate ([(R)-7] = 2.8 mM, [(CH₂CO₂)₂(Bu₄N)₂] = 28 mM, top). Asterisks indicate the residual solvent peaks.

Alternative binding models (i.e., stoichiometries) produced much poorer and hence unacceptable fitting of the titration data. In the case of (R,R)-12, we examined dicarboxylate anions such as glutarate and succinate, in order to have a direct point of comparison with (R,R)-1 (Table 2).

Table 2.

Binding constants (M⁻¹) for the 1:1 complexes between (R,R)-12 or (R,R)-1 and dicarboxylate anions in CDCl₃.^a

Entry	Macrocycle	Succinate	Glutarate
1	(R,R)-12	34 ± 3	21 ± 13
2b	(R,R)-1	n. d.	30 ± 12

^aMeasured by ¹H NMR (500 MHz, 298 K, CDCl₃) using tetrabutylammonium salts. ^bData taken from Ref. [31]; n. d. = not determined.

Succinate was found to bind better than glutarate to macrocycle (R,R)-12, probably as its length is more suited than glutarate to fit into the cavity of 12 by interacting simultaneously with two different NH groups placed on the same binaphthyl residue (see above, molecular modeling), possibly in a cooperative fashion [39].

Similar titrations were carried out on (R,R)-10 and (R,R)-11, bearing acetoxy substituents in the 2,2' positions of the binaphthyl skeletons, which are certainly bulkier than the methoxy substituents present in (R,R)-12. A very different behavior was observed for both macrocycles: The ¹H NMR spectra in CDCl₃, upon addition of both anionic guests, became very complex, with a complete loss of the initial symmetry. From the preliminary data in our hands, it is clear that there is a slow-exchanging equilibrium on the NMR time scale: the bulkier acetoxy group presumably inhibits a binding mechanism based on a fast host–guest exchange. A slow encapsulation mechanism, with multiple modes of binding of the difunctional anionic guests within the macrocycle, or the formation of aggregates of several macrocyclic units, held by the bifunctional anionic guests binding to a single amide of each macrocycle, cannot be ruled out at the present stage. Further studies are in progress to unravel the behavior of these acetoxy-bearing macrocycles.

Conclusion

We have reported the synthesis and characterization of three novel homochiral macrocycles, built upon resolved 1,1'-binaphthyl scaffolds, which incorporate either methoxy or acetoxy functionalities in the 2,2' positions, and carboxylic functionalities in the external 3,3' positions. After evaluation of the synthetic strategy through test reactions on model compounds, the macrocycles were obtained through one-pot amidation reactions by using two different rigid diarylamines and high-dilution conditions, although in low isolated yields (0–5%). The macrocycle bearing less sterically demanding methoxy substituents is an effective supramolecular receptor for dicarboxylate anions, with a preference for glutarate (K_a = 34 M⁻¹ for the 1:1 complex in CDCl₃), as measured by ¹H NMR spectroscopy. With the acetoxy groups installed within the macrocyclic framework, a drastic change of binding mode occurs, with slow aggregation equilibria on the NMR time scale.

Experimental

General. All commercially available compounds were purchased from commercial sources and used as received. Racemic or (R)-2 [40–41], racemic or (R)-3 [42], 4c [43], 4d [44] and (R)-7 [45] were prepared according to literature procedures. THF (Na), CH₂Cl₂ (CaH₂) and CHCl₃ (4 Å molecular sieves) were dried before use. Analytical thin-layer chromatography was performed on silica gel, chromophore-loaded, commercially available plates. Flash chromatography was carried out by using silica gel (pore size 60 Å, 230–400 mesh). ¹H and ¹³C NMR spectra were recorded from solutions in CDCl₃ on a 200, 300 or 500 MHz spectrometer with the solvent residual proton signal or tetramethylsilane as the standard. The UV–vis spectroscopic studies were recorded by using commercially available spectrophotometers. Mass spectra were recorded by using an electrospray ionization instrument. Optical rotations were measured on a polarimeter with a sodium lamp (λ = 589 nm) and are reported as follows: [α]_D^rt (c = g (100 mL solution)⁻¹). CD spectroscopy was performed by using a spectropolarimeter; spectra were recorded at 25 °C at a scanning speed of 50 nm min⁻¹ and were background corrected.

Compound 5a [35]. SOCl₂ (1.1 mL) was added to a solution of compound (RS)-2 (250 mg, 0.67 mmol, 1 equiv) in dry CHCl₃ (10 mL) and the solution was heated under reflux overnight. Then, the solution was concentrated in vacuo and the crude product was added to a solution of benzylamine cooled to 0 °C (430 mg, 4.00 mmol, 6 equiv) in dry CH₂Cl₂ (10 mL). After being stirred overnight at rt, the reaction mixture was quenched with 1 M HCl (30 mL), extracted with CH₂Cl₂ (3 × 25 mL), and dried (Na₂SO₄). The solution was filtered and concentrated in vacuo to yield pure 5a (340 mg, 93%). ¹H NMR (CDCl₃, 300 MHz, 25 °C) δ 12.44 (s, 2H, OH), 9.88 (s, 2H, NH), 8.74 (s, 2H, binaphthyl), 7.91 (d, 2H, binaphthyl), 7.37 (m, 14H, phenyl + binaphthyl), 6.98 (d, 2H, binaphthyl), 4.60 (d, CH₂). Alternative method: A solution of CDI (162 mg, 2.01 mmol, 3 equiv) in THF (12 mL) was added to a solution of (R)-2 (250 mg, 0.668 mmol, 1 equiv) in THF (20 mL). The solution was stirred for 1.5 h at rt, and then a solution of benzylamine (0.146 mL, 1.34 mmol, 2 equiv) in THF (12 mL) was added and the mixture was stirred for 15 h. The reaction mixture was concentrated in vacuo, and the crude product was purified by column chromatography (hexane/AcOEt 9:1) to yield 5a (44 mg, 12%).

Compound 6b. (COCl)₂ (0.137 mL, 1.57 mmol, 8 equiv) and one drop of DMF were added to a solution of compound (R)-3 (90 mg, 0.196 mmol, 1 equiv) and dry CH₂Cl₂ (10 mL). The solution was heated under reflux for 2 h. After 1 h at rt the solution was concentrated in vacuo, the crude product was dissolved in dry CH₂Cl₂ (5 mL), and a solution of 4b (0.045 mL, 0.49 mmol, 2.5 equiv) and Et₃N (0.082 mL, 0.59 mmol, 3 equiv) in dry CH₂Cl₂ (5 mL) was added. The resulting solution was heated under reflux for 2 h. After cooling, the reaction mixture was quenched with brine (20 mL), extracted with CH₂Cl₂ (3 × 25 mL), and dried (Na₂SO₄). The crude product was purified by column chromatography (hexane/AcOEt 8:2 to 7:3) to yield 6b (44 mg, 37%). ¹H NMR (CDCl₃, 300 MHz, 25 °C) δ 8.47 (s, 2H, binaphthyl), 8.10 (s, 2H, binaphthyl), 8.03 (m, 2H, phenyl), 7.60 (m, 6H, binaphthyl + phenyl), 7.37 (m, 4H, binaphthyl), 7.22 (m, 4H, phenyl), 1.83 (s, 6H, –COCH₃).

Compound 5b. K₂CO₃ (91 mg, 0.66 mmol, 8 equiv) and H₂O (10 mL) were added to a solution of compound 6b (44 mg, 0.082 mmol, 1 equiv) and CH₃OH (10 mL). Then, the solution was stirred for 4 h at rt. The reaction mixture was quenched with 1 M HCl, extracted with CH₂Cl₂ and dried (Na₂SO₄). The solution was filtered and concentrated in vacuo and the crude product was purified by column chromatography (hexane/AcOEt 7:3) to yield 5b (25 mg, 68%). ¹H NMR (CDCl₃, 300 MHz, 25 °C) δ 10.31 (brs, 2H, OH), 8.85 (s, 2H, binaphthyl), 7.97 (m, 2H, binaphthyl), 7.82 (m, 4H, phenyl), 7.40 (m, 8H, binaphthyl + phenyl), 7.17 (m, 4H, binaphthyl). The data are consistent with those reported in the literature [46].

Compound 6d. (COCl)₂ (0.28 mL, 3.21 mmol, 8 equiv) and one drop of DMF were added to a solution of compound 3 (184 mg, 0.402 mmol, 1 equiv) and dry CH₂Cl₂ (15 mL). Then, the solution was heated at reflux for 2 h. After 1 h at rt the solution was concentrated in vacuo and the crude product was dissolved in dry CH₂Cl₂ (10 mL). This solution and a solution of 4d (300 mg, 1 mmol, 2.5 equiv) in dry CH₂Cl₂ (10 mL) were added dropwise at the same rate over a period of 1 h to a solution of Et₃N (0.279 mL, 2 mmol, 5 equiv) in dry CH₂Cl₂ (10 mL). The resulting solution was heated under reflux for 2 h. After cooling, the reaction mixture was quenched with brine (20 mL), extracted with CH₂Cl₂ (3 × 25 mL) and dried (Na₂SO₄). The crude product was purified by column chromatography (CH₂Cl₂/AcOEt 10:0 to 9:1) to yield 6d (61 mg, 15%). ¹H NMR (CDCl₃, 300 MHz, 25 °C) δ 8.46 (s, 2H, binaphthyl), 8.04 (s, 4H, binaphthyl), 7.56 (d, 6H, binaphthyl + phenyl), 7.35 (m, 6H, binaphthyl + phenyl), 6.97 (d, 8H, phenyl), 1.84 (s, 6H, -COCH₃), 1.53 (s, 18H, t-Bu).

Macrocycle (R,R)-10. (COCl)₂ (0.381 mL, 4.38 mmol, 8 equiv) and one drop of DMF were added to a solution of compound (R)-3 (250 mg, 0.546 mmol, 1 equiv) in dry CH₂Cl₂ (20 mL). The solution was heated under reflux for 2 h. After 1 h at rt the solvent was removed in vacuo and the crude product was dissolved in dry CH₂Cl₂ (35 mL). This solution and a solution of 8 (109 mg, 0.546 mmol, 1 equiv) in dry CH₂Cl₂ (35 mL) were added dropwise at the same rate over a period of 1 h to a solution of Et₃N (0.228 mL, 1.64 mmol, 3 equiv) in dry CH₂Cl₂ (35 mL). The resulting solution was heated under reflux overnight. After cooling, the reaction mixture was quenched with brine (50 mL), extracted with CH₂Cl₂ (3 × 50 mL) and dried (Na₂SO₄). The solution was filtered and concentrated in vacuo, and the crude product was purified by column chromatography (CH₂Cl₂/AcOEt 9:1) to yield (R,R)-10 (7 mg, 4%). [α]_D²⁵ +101° (c 0.001, CH₂Cl₂); ¹H NMR (CDCl₃, 75 MHz, 25 °C) δ 8.58 (s, 4H, binaphthyl), 8.05 (m, 8H, phenyl), 7.50 (m, 16H, binaphthyl + phenyl), 6.97 (d, 8H, binaphthyl), 1.82 (s, 12H, -COCH₃); ¹³C NMR (CDCl₃, 75 MHz, 25 °C) δ 168.7 (O-CqOCH₃), 163.5 (O-CqON), 154.6 (Cq), 143.1 (Cq), 133.8 (Cq), 133.3 (CH), 131.2 (Cq) 131.0 (Cq), 129.0 (CH), 128.7 (2CH), 128.0 (Cq), 127.0 (CH), 126.4 (CH), 125.1 (Cq), 121.1 (CH), 119.7 (2CH), 20.4 (COCH₃); ESIMS m/z: 1267.5 ([M + Na]⁺, 100%).

Macrocycle (R,R)-11. The title compound was prepared by following the same procedure used for 10 but with diamine 9 used instead of 8. The crude product was purified by column chromatography (CH₂Cl₂/AcOEt 98:2) to yield (R,R)-11 (18 mg, 4%). [α]_D²⁵ +56° (c 0.0015, CH₂Cl₂); ¹H NMR (CDCl₃, 75 MHz, 25 °C) δ 8.58 (s, 4H, binaphthyl), 8.25 (s, 4H, phenyl), 8.07 (d, 4H, phenyl), 7.40 (m, 24H, binaphthyl + phenyl), 1.83 (s, 12H, COCH₃); ¹³C NMR (CDCl₃, 75 MHz, 25 °C) δ 168.9 (O-CqOCH₃), 163.8 (O-CqON), 143.0 (Cq), 138.1 (Cq), 133.9 (Cq), 131.3 (CH), 131.1 (2CH), 130.9 (Cq), 129.6 (Cq), 129.0 (CH), 128.9 (CH), 127.9 (Cq), 127.1 (CH), 126.3 (CH), 125.1 (Cq), 119.2 (2CH), 20.4 (CH₃); ESIMS m/z: 1535.1 ([M + Na]⁺, 100%).

Macrocycle (R,R)-12. The title compound was prepared by following the same procedure used for 10 but with (R)-7 used instead of (R)-3. The crude product was purified by column chromatography (CH₂Cl₂/AcOEt 99:1) to yield (R,R)-12 (6 mg, 5%). [α]²⁵_D +170° (c 0.0015, CH₂Cl₂); ¹H NMR (CDCl₃, 300 MHz, 25 °C) δ 10.44 (s, 4H, NH), 9.07 (s, 4H, binaphthyl), 8.15 (d, 4H, binaphthyl), 7.78 (d, 8H, phenyl), 7.56 (t, 4H, binaphthyl), 7.45 (t, 4H, binaphthyl), 7.27 (d, 4H, binaphthyl), 7.02 (d, 4H, phenyl), 3.33 (s, 12H, O-CH₃); ¹³C NMR (CDCl₃, 75 MHz, 25 °C) δ 162.3 (O-CqON), 154.0 (Cq), 153.5 (Cq), 135.2 (Cq), 134.5 (CH), 133.9 (Cq), 130.4 (Cq), 129.9 (CH), 129.0 (CH), 126.0 (CH), 125.3 (CH+Cq), 124.9 (Cq), 121.0 (2CH), 119.3 (2CH), 62.0 (OCH₃); ESIMS m/z: 1155.4 ([M + Na]⁺, 10%).

¹H NMR complexation experiments. All spectra were recorded at 500 MHz and at 298 K. K_a values for the complexation of (R,R)-12 with (n-Bu₄N⁺)₂X²⁻ (X²⁻ = ⁻O₂C(CH₂)₂CO₂⁻, ⁻O₂C(CH₂)₃CO₂⁻) were assessed by nonlinear treatment of the data obtained from ¹H NMR titration experiments. Samples were prepared by adding to a 0.5 mL solution of the host (5 mM in CDCl₃) successive aliquots of a stock solution of the guest (62.5 mM in CDCl₃), up to a final volume of 0.9 mL. Eight values of δ_obs for the H-4 resonances were collected by keeping the [host] to [guest] ratio in the (1:0.25)–(1:10) interval. Nonlinear regression analysis of δ_obs versus [guest], using the WinEQNMR for Windows software package [47], provided the K_a value.

Molecular modeling. Geometry optimizations for the structures presented were carried out, first by using the semiempirical PM3 method, and then refined at the B3LYP/6-31G(d) level [48]. All calculations were performed at the Cineca supercomputer facility by using the Gaussian 09, Revision C.01 package [49].

Supporting Information

File 1

Additional NMR and MS spectra for the macrocyles, and Cartesian coordinates for the calculated geometries discussed in the paper.

This article is part of the Thematic Series "Molecular switches and cages".