Abstract
Optimum bond strength between denture soft liner and denture base resin is very important for the success of any denture prosthesis. The tensile bond strength of two commercially available silicone-based heat cured (Molloplast B) and auto polymerizing (Mollosil) was compared with denture base material (trevalon). Molloplast B-trevalon bond in both un-polymerized (dough stage) and already polymerized forms were also compared. Lloyds Universal testing machine was used to test 60 samples. Molloplast B bond strength was greater than Mollosil soft denture liner; it was even greater when packed against trevalon in an un-polymerized form than an already polymerized trevalon using primo adhesive. Both the soft lining materials used are acceptable for clinical usage.
Keywords: Auto polymerizing soft denture liner, Denture base resin, Heat cure soft denture liner, Tensile bond strength
References
- 1.Jin C., Nikawa H., Makihira S., Hamada T., Furukawa M., Murata H. Changes in surface roughness and colour stability of soft denture lining materials caused by denture cleansers. J Oral Rehabil. 2003;30:125–130. doi: 10.1046/j.1365-2842.2003.01014.x. [DOI] [PubMed] [Google Scholar]
- 2.Matthews E. Soft resin lining for dentures. Br Dent J. 1945;78:140. [Google Scholar]
- 3.Hadary A.E., Drummond J.L. Comparative study of water sorption, solubility, and tensile bond strength of two soft lining materials. J Prosthet Dent. 2000;83:356–361. doi: 10.1016/S0022-3913(00)70140-5. [DOI] [PubMed] [Google Scholar]
- 4.Bates J.F., Smith D.C. Evaluation of indirect resilient liners for denture laboratory and clinical tests. J Am Dent Assoc. 1965;70:344–353. doi: 10.14219/jada.archive.1965.0286. [DOI] [PubMed] [Google Scholar]
- 5.Kawano F., Dootz E.R., Koran A., 3rd, Craig R.G. Comparison of bond strength of six soft denture liners to denture base resins. J Prosthet Dent. 1992;68:368–371. doi: 10.1016/0022-3913(92)90347-D. [DOI] [PubMed] [Google Scholar]
- 6.McCabe J.F., Carrick T.E., Kamohara H. Adhesive bond strength and compliance for denture soft lining materials. Biomaterials. 2002;23:1347–1352. doi: 10.1016/S0142-9612(01)00253-8. [DOI] [PubMed] [Google Scholar]
- 7.Mordie R.M., King G.E. Evaluation of primers used for bonding silicone to denture base material. J Prosthet Dent. 1989;61:636–639. doi: 10.1016/0022-3913(89)90292-8. [DOI] [PubMed] [Google Scholar]
- 8.Fowler JA (1968) A comparison of bonding strength characteristics between a silicone rubber, Silastic 390, and various denture base resins (MScD thesis) University of Texas
- 9.Al-Athel M.S., Jagger R.G. Effect of test method on the bond strength of a silicone resilient denture lining material. J Prosthet Dent. 1996;76:535–540. doi: 10.1016/S0022-3913(96)90014-1. [DOI] [PubMed] [Google Scholar]
- 10.Cantor R., Webber R.L., Stroud L., Ryge G. Methods for evaluating prosthetic facial materials. J Prosthet Dent. 1969;21:324–332. doi: 10.1016/0022-3913(69)90295-9. [DOI] [PubMed] [Google Scholar]
- 11.Aydin A.K., Terzioglu H., Akinay A.E., Ulubayram K., Hasirci N. Bond strength and failure analysis of lining materials to denture resin. Dent Mater. 1999;15:211–218. doi: 10.1016/S0109-5641(99)00038-X. [DOI] [PubMed] [Google Scholar]
- 12.Amin W.M., Fletcher A.M., Ritchie G.M. The nature of the interface between polymethylmethacrylate denture base materials and soft lining materials. J Dent. 1981;9:336–346. doi: 10.1016/0300-5712(81)90007-5. [DOI] [PubMed] [Google Scholar]
- 13.Jagger R.G., Al-Athel M.S., Jagger D.C., Vowles R.W. Some variables influencing the bond strength between PMMA and a silicone denture lining material. Int J Prosthodont. 2002;15:55–58. [PubMed] [Google Scholar]
- 14.Craig R.G., Gibbons P. Properties of resilient denture liners. J Am Dent Assoc. 1961;63:382–390. doi: 10.14219/jada.archive.1961.0218. [DOI] [PubMed] [Google Scholar]
- 15.Khan Z., Martin J., Collard S. Adhesion characteristics of visible light cured denture base material bonded to resilient lining materials. J Prosthet Dent. 1989;62:196–200. doi: 10.1016/0022-3913(89)90313-2. [DOI] [PubMed] [Google Scholar]