Skip to main content
PMC home page
Nature Portfolio logoLink to Nature Portfolio
. 2012 Nov 27;3:1226. doi: 10.1038/ncomms2233

Carbon nanotube–liposome supramolecular nanotrains for intelligent molecular-transport systems

Eijiro Miyako 1,a, Kenji Kono 2, Eiji Yuba 2, Chie Hosokawa 1, Hidenori Nagai 1, Yoshihisa Hagihara 1
PMCID: PMC3514502  PMID: 23187626

Abstract

Biological network systems, such as inter- and intra-cellular signalling systems, are handled in a sophisticated manner by the transport of molecular information. Over the past few decades, there has been a growing interest in the development of synthetic molecular-transport systems. However, several key technologies have not been sufficiently realized to achieve optimum performance of transportation methods. Here we show that a new type of supramolecular system comprising of carbon nanotubes and liposomes enables the directional transport and controlled release of carrier molecules, and allows an enzymatic reaction at a desired area. The study highlights important progress that has been made towards the development of biomimetic molecular-transport systems and various lab-on-a-chip applications, such as medical diagnosis, sensors, bionic computers and artificial biological networks.

Inline graphicThere is growing interest in the development of artificial molecular-transport systems. Miyako et al. develop a supramolecular system consisting of carbon nanotubes and liposomes that allows the directional transport and controlled release of cargo molecules.

Human activities (for example, thought, emotion and behaviour) are directly formed by biological network systems. Biological network systems such as inter/intra-cell-signalling systems are handled in a sophisticated manner by the molecular transport of molecular information (low-molecular-weight compounds, proteins and genes and so on)1. Over the past few decades, there has been a strong interest in the development of molecular-transport systems using microorganisms2, naturally occurring biomolecular motors3,4 and synthetic micro-nanoscale robots (micro-nanobots)5,6,7,8. However, the following key technologies are not sufficiently developed to realize optimum performance from the transportation method: directional propagation of transporters4,9,10,11, controlled release8 of carrier molecules and transmission/reception systems (artificial molecular signalling; expression of significant biochemical reactions in the targeted sites) for transferred carrier molecules3,6.

Nanomaterials are potentially promising for a number of scientific and technological applications12. For the creation of functional nanomaterials for various nanobiosystems, molecular self-assembly technologies have attracted significant attention, as they are easily processed12. In particular, liposomes are one of the most well-known self-assembled materials and have numerous uses as biochemical and biophysical tools because of their many attractive properties, which includes encapsulating a variety of molecules (drugs, peptides, proteins and genes and so on) and exhibiting dramatic conformation changes due to external physical or chemical stimulations (pH, light and temperatureand so on)13,14,15,16. On the other hand, carbon nanotubes (CNTs) offer a unique combination of electrical, mechanical, thermal and optical properties that make them highly promising materials for numerous applications17,18,19,20,21,22,23,24. We have been investigating the use of laser-induced CNTs as a potent photothermal nanomaterial in various thermal applications17,18,19,20,21,22,23,24. Of several photothermally active nanomaterials that were considered, CNTs are particularly interesting because of the extraordinarily high efficiency of their photothermal energy conversion and high light-absorption cross-section over a wide range of wavelengths17,18,19,20,21,22,23,24. The functionalization of CNTs is the next key step for the integration of these new materials into different systems for technological and biomedical applications25.

In this study, we demonstrate that (1) an electrical train-like nanobot based on a CNT and temperature-responsive liposome (CNT–liposome nanotrain) can be formed by a self-assembly technology; (2) the CNT–liposome nanotrains successfully function in microdevices for various applications, such as the solving of mazes and molecular transportations after the application of voltage and because of the photothermal property of CNT; and (3) the electric- and light-driven CNT–liposome nanotrains effectively illustrated the enzymatic reaction at the targeted position. Our newly developed molecular-transport system, which is based on the photoinduced-CNT–liposome nanotrains, can easily trigger the unloading of molecules and an enzymatic reaction in a targeted area in a non-contact manner. This is performed using a highly focused external laser beam. Our designed supramolecular nanotrains and the intelligent molecular-transport system provide a starting point for the exploration of more sophisticated biomimetic molecular-transport systems with directionally controlled motion, on-time controlled release of carrier molecules and various biochemical reactions derived from the receipt of functional molecules at the desired area.

Results

Characterization of nanotrains

To develop an intelligent molecular-transport system, we synthesized the CNT–liposome nanotrains using a self-assembly technology (Fig. 1) (see Methods for details). However, generally, CNTs are not dispersed in solvents because of their strong tendency to aggregate17,18,19,20,21,22,23,24. Hence, we employed a highly water-dispersible avidin–polyethylene glycol-2,000 (PEG2,000, molecular weight of PEG=2,000)–phospholipid (PL)-functionalized-single-walled CNT (SWNT) (avidin–PEG2,000–PL–SWNT) complex by the non-covalent approach17,18,19,20,21,22,23,24 (Fig. 1a). The hydrocarbon chains of PLs were adsorbed onto the graphitic surfaces of SWNTs via van der Waals and hydrophobic interactions, whereas the hydrophilic PEG chains extended into the aqueous phase to impart solubility23. On the other hand, generally, the functional liposomes were prepared by labelling 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[biotinyl(polyethyleneglycol)-2,000] (biotin–PEG2,000–PL) and N-(7-nitrobenz-2-oxa-1,3-diazol-4-yl)dioleoyl phosphatidylethanolamine (NBD–PE) molecules on the surface of liposomes. In addition, the functional liposomes are composed of dipalmitoylphosphatidylcholine, hydrogenated soybean phosphatidylcholine (HSPC) and cholesterol (see Methods for details). Furthermore, the functional liposomes spontaneously bind to SWNTs through the ligand–receptor interaction of biotin–avidin, and NBD molecules15 on the liposomes enable the tracking of the CNT–liposome nanotrain movement in the microdevices as a fluorescent tracer. Fluorescence microscopy analysis showed that the Brownian motion of green fluorescent CNT–liposome nanotrains (average size ≤1 μm) is observed in aqueous solution (Fig. 1b). These visible green fluorescent nanotrain particles are observed only when the SWNT and liposome are mixed in a predetermined stoichiometry (Table 1 and Fig. 2). We investigated the compounding ratio of SWNTs and liposome for the synthesis of microscopically detectable fluorescent nanotrains. Visible green fluorescent particles are observed only when the SWNT and liposome are mixed in a specific compounding ratio (Table 1; entry 1) (Fig. 2a). As a result, the entry 1 sample shows the maximum fluorescence intensity. On the other hand, visible black aggregations resulting from CNTs are formed in the cuvette in cases where there is a low liposome-compounding ratio (Table 1; entry 2 and 3). This is believed to be caused by the precipitation of CNTs when a small amount of liposomes form tightly roped bundles via the avidin–biotin interaction (Fig. 2b). Although the background fluorescence intensity is relatively high, visible fluorescent particles are not observed in the case of a high liposome-compounding ratio (Table 1; entry 4), because of the low synthetic yield of nanotrains (Fig. 2d). We can detect neither the avidin–PEG2,000–PL–SWNT nor the functional liposome by fluorescence microscopy because of the detection limitations of microscopy (Table 1; entries 5 and 6) (Fig. 2e). Also, a mixed solution of the functional liposome and NH2–PEG2,000–PL–SWNT does not exhibit fluorescence because of incomplete supramolecular complexes (Table 1; entry 7) (Fig. 2g). These results clearly indicate that the optimum concentrations of the avidin–PEG2,000–PL–SWNT and the functional liposome are ~5 and 20,000 nM, respectively. Next, the CNT–liposome nanotrain was structurally characterized by transmission electron microscopy (TEM) (Fig. 3). TEM analysis of the CNT–liposome nanotrain revealed that spherical liposomes (average diameter≈100 nm) are attached on the surface of an avidin–PEG2,000–PL–SWNT nanofibre (average diameter≈10 nm, length≈200–1,000 nm), as shown in Fig. 1a. We also observed that the lipid-coated fibreform SWNTs became entangled on the surface of liposomes and resulted in the formation of aciniform structures. These results clearly show that the synthesized CNT–liposome nanotrains have supramolecular nanostructures, and their luminary fluorescence facilitates the observation of microscopic fluorescence.

Figure 1. Structural characterization of CNT–liposome nanotrains.

Figure 1

Open in a new tab

(a) Schematic illustration of the CNT–liposome nanotrain. (b) Fluorescence microscopic images of CNT–liposome nanotrains. Magnification: X100. Scale bars, 10 μm.

Table 1. Synthesis of CNT–liposome nanotrain.

Entry Sample concentration (nM)
 Fluorescence intensity Visible aggregation in cuvette
  SWNT Liposome    
1 5 20,000 18.577 −
2 9 3,600 5.276 +
3 10 400 7.387 +
4 1 36,000 14.08 −
5 10 0 6.714 −
6 0 40,000 5.244 −
7* 5 20,000 5.925 −
Open in a new tab

*Mixed solution of biotin-functionalized liposome and NH2–PEG2,000–PL–SWNT (without avidin molecules).

Figure 2. Effect of SWNT and liposome concentrations on the nanostructure of CNT–liposome nanotrains.

Figure 2

Open in a new tab

(a–g) Fluorescence micrographs of various CNT–liposome nanotrains in Table 1 (entry 1–7). Scale bars, 10 μm. (h–n) Schematic illustrations of various CNT–liposome nanotrains in Table 1 (entry 1–7). Visible green fluorescent nanotrain particles are observed only when the SWNT and liposome are mixed in a specific compounding ratio (entry 1 in Table 1). Graphics depict the expected nanotrain conformations (Fig. 2h–n). These results clearly indicate that the optimum compounding ratio of the avidin–PEG2,000–PL–SWNT and functional liposome is 1:4,000 for further experiments (entry 1 in Table 1).

Figure 3. TEM images of CNT–liposome nanotrains.

Figure 3

Open in a new tab

Sample concentration for these observations: SWNT=5 nM, liposome=20,000 nM. Scale bars, 100 nm.

Nanotrains movement in the microdevice

The ability to use electrical control for the direction and motion of CNT–liposome nanotrains in a microdevice is illustrated in Fig. 4. First, we prepared a polydimethylsiloxane (PDMS) microdevice based on a straight microchannel (width: 100 μm, depth: 50 μm) to investigate the microscale behaviour of CNT–liposome nanotrains by applying a voltage (Fig. 4a). To prevent the adhesion of nanotrains to the surface of the microchannels, the fabricated microdevice was treated with a hydrophilic polymer (Methods). In addition, 20 wt% of dextran was introduced into the microchannel to prevent the undesired permission of nanotrains to enter a microchannel caused by molecular diffusion (Methods). The synthesized CNT–liposome nanotrains are negatively charged in the 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) buffer (pH 7.1) (zeta potential=−0.21±1.6 mV). In this way, the CNT–liposome nanotrains can move to the positively charged goal position from the negatively charged start position by the application of voltage. Green fluorescent CNT–liposome nanotrains gradually move straight ahead to the goal position after a voltage is applied (50 V), as indicated by fluorescence microscopy (Fig. 4c and Supplementary Movie 1). Figure 2d shows the absolute and relative speeds of the CNT–liposome nanotrains in a microchannel with the application of different voltages and current outputs. Under these conditions, the nanotrains can reach absolute speeds of ~700 μm s−1, which correspond to a relative speed of ~1,200 body lengths (bl) per second. Thus, we report the realization of fast, electric-driven nanobots with speeds that are comparable to that of catalytic self-propelled microengines (ca. 200 bl s−1)5 and some bacteria (ca. 50–150 bl s−1)5. Figure 2e reveals the fluorescence intensity curves for the moved CNT–liposome nanotrains with the application of various voltages (50–400 W). We found that there was a significant increase in the fluorescence intensity of nanotrains as the voltage output increased. On the other hand, it is well known that the electrocataphoresis of DNA in a micro-nanodevice is rapid because of the small cavity in micro-nanochannels26. Hence, the speed of the CNT–liposome nanotrain was investigated for comparison with that of the representative DNA molecule (λ phage DNA), which has a negative charge that is derived from phosphate backbone (zeta potential=−16.3±0.82 mV) (Fig. 4f). In the present system, the average speed of the CNT–liposome nanotrains is approximately two times higher than that of λ phage DNA molecules. This may be due to the physical migration barrier of molecules in the dextran gel construct (Fig. 4g). From fluorescence microscopy, the particle sizes of the λ phage DNA molecules intercalated with GelRed (average size≈10 μm) are obviously greater than those of CNT–liposome nanotrains (average size≤1 μm) (Fig. 4h and Supplementary Movie 2). Furthermore, to realize the advanced electronic regulation of nanotrains, we investigated the switchback control of the CNT–liposome nanotrain movements in a microchannel (Fig. 4i). The direction of the nanotrain’s movement is easily controlled using this mechanical switchback feature in a manner similar to that of an electric train (Fig. 4j and Supplementary Movie 3). These results completely indicate that electric-driven CNT–liposome nanotrains can be directionally moved in a microdevice similar to ‘electrotaxis’, which is the movement of organisms towards or away from a source of electrostimulation using a biased-random-walk process27.

Figure 4. Electrical control of CNT–liposome nanotrain movement.

Figure 4

Open in a new tab

(a) Schematic illustration of the experiment system. S, start; G, goal. (b) Design drawing of the microdevice based on a straight microchannel. Red arrows show the direction of CNT–liposome nanotrain movement. (c) Movement of the CNT–liposome nanotrains in a straight microchannel after applying a voltage. The white square shows the location at which the fluorescence intensity of the moving CNT–liposome nanotrains was analysed. Applying a voltage=50 V. Magnification of the inset close-up figure: X10. Scale bars, 100 μm. (d) Speed of the CNT–liposome nanotrains and current in microchannel versus applying a voltage. (e) Fluorescent intensity curves of the moved CNT–liposome nanotrain at various applied voltages (50–400 W). (f) Schematic illustration of the single λ phage DNA intercalated with GelRed molecules. (g) Fluorescence microscopic image of the λ phage DNA molecules in a straight microchannel. Applying a voltage=200 V. Magnification: X10. (h) Speed of the CNT–liposome nanotrains and λ phage DNA molecules in a straight microchannel after applying voltage. Scale bar, 100 μm. (i) Switchback control of the CNT–liposome nanotrain movement. Red arrows show the direction of CNT–liposome nanotrain movement. (j) A direct observation of the switchback movement of the CNT–liposome nanotrains by fluorescence microscopy. Magnification: X10. Applying voltage=300 V. Scale bars, 100 μm.

Navigation system

Next, we investigated about a higher level of motion control of CNT–liposome nanotrains (Fig. 5). The solving of maze problems is relevant to the everyday issues of urban transportation and experimental psychology and is also one of the model problems in network and graph theory and robotics28,29,30,31,32. In this study, we posed several problems: finding the shortest paths in the bifurcated microchannel (Fig. 5a), the simple maze (Fig. 5b and Supplementary Fig. S1) and the complicated maze (Fig. 5e) using biomimetic CNT–liposome nanotrain electrotaxis. These devices have 100-μm-wide and 50-μm-deep microchannels (see Methods). Once in the maze, the CNT–liposome nanotrains move towards the goal position; that is, towards the source of the electrical potential gradient. In doing so, the shortest path was always found through the bifurcated microchannels (Fig. 5c and Supplementary Movie 4). The speed v of the CNT–liposome nanotrains in the microchannel is given by the following equation33:

Figure 5. Navigations by CNT–liposome nanotrains.

Figure 5

Open in a new tab

(a,b,e) Design drawings of the microdevices based on bifurcated, simple-maze and complicated-maze microchannels, respectively. Red arrows show the direction of CNT–liposome nanotrain movement. Green and pink lines indicate the shortest and the longest paths, respectively. S, start; G, goal; G1, goal 1; G2, goal 2; G3, goal 3. (c) A direct observation of the nanotrain’s behaviour in the bifurcated microchannel after applying a voltage (300 V). Image of the nanotrain movement showing the shortest path between S and G. Scale bar, 100 μm. (d) A direct observation of the nanotrain behaviour in the simple-maze microchannel after applying a voltage (300 V). Image of the nanotrain movement showing the route for the shortest path in the maze. Scale bar, 100 μm. (f) A direct observation of the nanotrain behaviour in the complicated-maze microchannel after applying voltage (300 V). Image of the nanotrain movement showing the quickest route from S to G for a more complex maze. Scale bar, 500 μm.

graphic file with name ncomms2233-m1.jpg

where μ is the mobility of the nanotrains, E is the electric field strength, V is the applied voltage and L the length of the microchannel. Thus, CNT–liposome nanotrains go the shortest path because v is indirectly proportional to L. CNT–liposome nanotrains can be quickly moved to the various targeted goals (G1–G3) from the start by alteration of the electrode position in the goal (Fig. 5d; Supplementary Movie 5 and Supplementary Fig. S1). Surprisingly, CNT–liposome nanotrains are also able to solve the complicated maze and migrate smoothly along the shortest path within ~1.5 min without ‘steepness’ or ‘errors’ (Fig. 5f and Supplementary Movie 6). These results clearly demonstrate that CNT–liposome nanotrains have intelligent performance navigation for solving mazes using an electrical potential gradient.

Molecular-transport system

One of the main goals of this study is to demonstrate for the first time the controlled (triggered) release of substrates from CNT–liposome nanotrains (Fig. 6). To accomplish the challenging goal of the controlled release from synthetic CNT–liposome nanotrains, we functionalized the surface of the CNT–liposome nanotrains with a mixed-binding lissamine rhodamine B–sulfonyl phosphatidylethanolamine (Rh–PE) as a temperature indicator18,19,20,21 and encapsulated calcein as a transporting model molecule into the liposomes (Fig. 6a). The present functional liposome has a temperature-responsive property that is designed to structurally destruct at a temperature of greater than 42 °C by adjusting these chemical components13,14. Recently, we have demonstrated that photoinduced CNTs can operate as exothermic nanomaterials17,18,19,20,21,22,23,24. Therefore, laser-induced-CNT–liposome nanotrains can trigger the release of calceins from within the liposomes, as shown in Fig. 6a. When the moving CNT–liposome nanotrain in the microchannel was irradiated by a near-infrared (NIR) laser (wavelength: 1,064 nm, laser power: 700 mW (ca. 69 mW μm−2), laser spot diameter: ca. 3.6 μm), we immediately observed the shiny green fluorescence caused by released calcein molecules (Fig. 6d and Supplementary Movie 7). The fluorescence of calcein is not observed before laser irradiation because calcein molecules inside the liposomes are self quenched at high concentrations16. The controlled release of calceins from the CNT–liposome nanotrains was achieved by the sequential ‘on’ and ‘off’ switching of the NIR laser. Figure 6e shows the fluorescence profiles at four different laser powers (100, 300, 500 and 700 mW (10, 30, 49 and 69 mW μm−2, respectively)). We found that the fluorescence intensity increases significantly with the NIR laser power. Upon laser NIR irradiation, we estimated the temperature of nanotrains utilizing Rh molecules on the liposomes (Fig. 6f and Supplementary Movie 8). The fluorescence quenching of Rh for the nanotrains in the microchannel was observed almost immediately (below 0.03 s) upon NIR laser irradiation and is similar to our previous studies18,19,20,21. In addition, the temperatures at laser powers of 100, 300, 500 and 700 mW (10, 30, 49 and 69 mW μm−2, respectively) increased from 21 °C to 22, 36, 45 and 53 °C, respectively (Fig. 6e). There were no fluorescent changes illustrating the release of calcein or changes in temperature during the control experiments without CNTs (only functional liposome).

Figure 6. Molecular-transport system by CNT–liposome nanotrains.

Figure 6

Open in a new tab

(a) Concept of molecular transportation by CNT–liposome nanotrains. (b) Chemical structure of calcein and Rh–PE. (c) Design drawing of the microdevice based on a straight microchannel for molecular transportation. Black arrows show the direction of CNT–liposome nanotrain movement. S, start; G, goal. (d) Sequential calcein release by laser-induced-CNT–liposome nanotrains. The white dot square shows the location at which the fluorescence intensity of released calcein molecules was analysed. Magnification: X20. Applying voltage=100 V. Scale bars, 100 μm. (e) Fluorescence intensities of the released calcein molecules at various laser powers (100–700 mW (10–69 mW μm−2)). (f) A direct observation of ultrafast temperature change in the microchannel. The white dot square indicates the location at which the temperature was analysed in Fig. 4e. The white arrow indicates the fluorescence quenching of Rh by the photothermal property of CNTs. Magnification: X20. Laser power: 700 mW (69 mW μm−2). Applying voltage=100 V. Scale bars, 100 μm.

Artificial molecular signalling

Molecular transportation is inspired by the observation that communication in biological systems, such as inter/intra-cell signalling, is done through molecules1. To construct these biomimetic molecular-transport systems, the most important research challenges are directional propagation, the controlled release of carrier molecules and transmission/reception systems for carrier molecules. As a result, we investigated a transmission/reception system—‘artificial molecular signalling’—in which the enzymatic reaction was triggered by the laser-induced-CNT–liposome nanotrains at the targeted position (Fig. 7). The concept of this artificial molecular signalling is illustrated in Fig. 7a. First, the CNT–liposome nanotrains encapsulating fluorescein digalactoside (FDG) that act as transporters of signal molecules are transferred to the targeted goal reservoir (site G) from the start position (site S) by the application of voltage. Next, directionally migrated CNT–liposome nanotrains in site G are irradiated by an NIR laser (1,064 nm), and FDG molecules are released at the targeted area. It is well known that FDG is a fluorogeneic substrate for β-galactosidase34. Hence, non-fluorescent FDG is sequentially hydrolysed by the enzymes in site G, and it then transformed to highly fluorescent fluorescein34. We can observe bright-green-coloured fluorescence in site G that is caused by the enzymatic reaction as soon as 700-mW (69 mW μm−1) NIR irradiation begins (Fig. 7b and Supplementary Movie 9). There were no changes in the fluorescent observations of the enzymatic reaction when the control experiments without CNTs (only functional liposome) were performed. We conclude that the laser-induced-CNT–liposome nanotrains permit the controlled release of substances and the triggered enzymatic reaction through the molecular-transport system, based on the nanotrain’s electrotaxis and the powerful photothermal property of CNT nanoheaters.

Figure 7. Artificial molecular signalling by CNT–liposome nanotrains.

Figure 7

Open in a new tab

(a) Concept of artificial molecular signalling. Black arrows show the direction of CNT–liposome nanotrain movement. (b) Direct observation of enzymatic reaction triggered by artificial molecular signalling. The white arrow indicates the irradiation position of the laser beam. Magnification: X20. Laser power: 700 mW (69 mW μm−2). Applying voltage=100 V. Scale bars, 200 μm.

Discussion

We successfully developed a novel supramolecular nanotrain based on CNTs and liposome using the self-assembly technique. The nanotrain enables both directional migration and the solving of mazes in an electric field. In addition, the controlled release of substrates and a triggered enzymatic reaction were successfully achieved at a targeted position using laser irradiation. This study represents an important advance in the creation of programmable and adaptable nanobiosystems. The application of micro-nanobots in micro-nanofabricated environments is an exciting development2,3,4,5,6,7,8,9,10,11. Our technology is also going to offer novel possibilities for future developments in lab-on-a-chip applications, such as medical diagnosis, sensors, bionic computers and artificial biological networks. In particular, our system will provide a simulation tool for potential in vivo medical applications, such as remote controlling of untethered micro-nanobots in blood vessels. We believe that these kinds of simulation are very useful for development of advanced drug-delivery systems and nano-surgery of biological system by the use of micro-nanobots.

Methods

Synthesis of CNT–liposome nanotrains

The avidin–PEG2,000–PL–SWNT was synthesized as follows. SWNT (2.5 mg) (high-pressure carbon monoxide, super-purified SWNTs (purity>95%); Unidym) and 3-(N-succinimidylocyglutaryl) aminopropyl, polyethyleneglycol carbamyl distearoylphosphatidylethanolamine (NHS–PEG2,000–PL) (5 mg) (molecular weight of PEG chain=2,000; NOF) were sonicated for 15 min in PBS buffer (pH 7.3) (5 ml) on ice (<8 °C) in an ultrasonication bath (USD-2R; AS ONE) to obtain a uniform dispersion. The NHS–PEG2,000–PL–SWNT solutions were centrifuged (10,000 g, 15 min, 4 °C) (3500; Kubota). The supernatant was carefully collected after centrifugation. The superfluous NHS–PEG2,000–PL was filtered though a polytetrafluoroethylene membrane (pore size=100 nm; Millipore) washed with PBS buffer (50 ml). The black-coloured NHS–PEG2,000–PL–SWNT sheet on a polytetrafluoroethylene membrane was dispersed in PBS buffer (5 ml) by sonication for a few minutes. Avidin (1 mg) (Wako) was dispersed in a NHS–PEG2,000–PL–SWNT solution (5 ml). After the mixture was vigorously stirred for 3 h at room temperature, it was filtered to remove the unreacted avidin and washed with HEPES buffer (pH 7.1) (50 ml). The obtained avidin–PEG2,000–PL–SWNT sheet was dispersed in the HEPES buffer (5 ml) by sonication. The quantity of SWNTs dispersed in the HEPES buffer by avidin–PEG2,000–PL molecules was determined through weight measurements by the thorough washing and removal of avidin–PEG2,000–PL and was found to be ca. 200 μg SWNT per ml HEPES buffer (ca. 1 μM). The amino-terminated–PEG2,000–PL-functionalized SWNT (NH2–PEG2,000–PL–SWNT) was synthesized in the same way as the avidin–PEG2,000–PL–SWNT, with the exception of the functionalization of avidin, except for the process by which avidin is modified. The functional liposomes were synthesized as follows. A mixture of dipalmitoylphosphatidylcholine (Sigma), HSPC (NOF), cholesterol (Sigma), biotin–PEG2,000–PL (molecular weight of PEG chain=2,000; Avanti Polar Lipids) and Rh–PE (Avanti Polar Lipids) or NBD–PE (Avanti Polar Lipids) in the molar ratio of 58.2:29.1:11.6:0.5:0.6 was dissolved in chloroform, and the solvent was removed by evaporation to afford a thin mixed-lipid membrane. The HSPC was generously donated by NOF (Tokyo, Japan). The obtained membrane was further dried under vacuum conditions and dispersed in a 20 mM HEPES-buffered solution containing 150 mM NaCl (pH 7.4) (HBS) by 10 min sonication using a bath-type sonicator at ~65 °C. The obtained liposome suspension was extruded through a polycarbonate membrane (pore size=100 nm; Advantec). The lipid concentration was determined by the choline oxidase method (Phospholipid C Test Wako; Wako). For the loading of calcein (Wako) or FDG (Molecular Probes), a 63-mM calcein solution (pH 7.4) or HBS containing FDG (1 mg ml−1) was used for the hydration of the lipid membrane. The free calcein or FDG from the liposome suspension was removed using a Sepharose 4B column (GE Healthcare) with HBS. Finally, the CNT–liposome nanotrains were synthesized by mixing the avidin–PEG2,000–DSPE–SWNT with the functional liposomes. The compounding ratio of the SWNT and liposome is 1:4,000 (Table 1).

Characterization of CNT–liposome nanotrains

The CNT–liposome nanotrains were characterized using a fluorescence microscope (IX71; Olympus) equipped with an electron-multiplying charge-coupled device (EM-CCD) camera (PhotonMAX: 1024B; Princeton Instruments), a TEM (Tecnai G2F20; FEI) (acceleration voltage: 120 kV) and a zeta potential analyser (Nicomp 380 ZLS dynamic light-scattering instrument; Particle Sizing Systems). The TEM observations were supported by the IBEC Innovation Platform, AIST. Before the TEM observation, the CNT–liposome nanotrain in the PBS buffer (pH 7.3) was deposited on a carbon-coated support and negatively stained using a 1% uranyl acetate solution.

Microdevices

The four varieties of microdevices were based on straight, bifurcated, simple-maze and complicated-maze microchannels (width: 100 μm, depth: 50 μm) and fabricated by soft lithography and photolithography methods. First, the PDMS (Sylgard 184; Dow Corning) base and crosslinker (Sylgard 184; Dow Corning) were mixed at a weight ratio of 10:1, as specified by the manufacturer. Second, the mixture was subjected to shear mixing to ensure the uniform blending of the host matrix and the crosslinker. Next, the mixture was degassed in vacuum. A master was prepared by exposing and developing a photoresist pattern on a silicon wafer (SU-8 50; MicroChem). The PDMS/crosslinker mixture was poured onto the master. After curing, the PDMS substrate was peeled away from the master. Then, the PDMS sheet was punched with holes (diameter: 3 mm) to produce reservoirs. The PDMS and glass (Matsunami) substrates were closely bonded to each other by plasma treatment using a vacuum plasma coater (PDC210; Yamato). Finally, the microchannels were hydrophilized using a water-soluble polymer (lipidure CR1705; NOF). The lipidure was diluted 50 times with ethanol and introduced into the microchannels with a syringe or by decompression treatment. After several minutes, the microchannels were dried using a syringe.

Observation of nanotrain movement in a microchannel

The 20 wt% dextran (molecular weight=100,000–200,000; Polysciences) was dissolved in the HEPES buffer (pH 7.3), and it was introduced into the microchannels with a syringe or by decompression treatment. Then, the dextran solution in the start position reservoir was replaced by the CNT–liposome nanotrain solution (ca. 20 μl). The platinum electrodes (diameter: 600 μm; Nilaco) were placed in both start and goal positions, and a voltage (50–400 V) was applied to the microchannel using a high-voltage-power-supply system (HVS448; LabSmith). The nanotrain’s movement in the microchannel was observed by fluorescence microscopy (IX70; Olympus) with a colour CCD video camera (VB-7010; Keyence). The speed of the nanotrains was analysed by image-analysis software (ImageJ; NIH). The switchback of the nanotrain movement was controlled by the software (sequence; Labsmith). The movement of λ phage DNA (32 mDa, 48502, bp; Toyobo) molecules in a microchannel was monitored in a manner similar to that in nanotrains. Before the experiments, the DNA solution (90 μl, 16 μg ml−1) was mixed with 1 × GelRed solution (10 μL) (Wako) as an intercalator.

Laser experiments

The directional molecular transport, the temperature distribution in the microchannel and the artificial molecular-signalling experiments using the laser-irradiation set-up were performed as follows. The general procedures for these experiments are illustrated in Figs 4a and 5a. A 1,064-nm NIR laser beam from a continuous-wave YVO4 laser (BL106-C; Spectra Physics) (100–700 mW (10–69 mW μm−2)) was incorporated into the fluorescence microscopy set-up (IX71; Olympus), as described previously35. The laser beam was focused into the moved nanotrains in a straight microchannel with the objective (magnification: X20, numerical aperture 0.4; Olympus) during the application of voltage (50–300 V). The fluorescence images before and during the laser irradiation were recorded using an EM-CCD camera. The sequential calcein release experiment was performed by manual laser ‘on’–‘off’ switching. The temperature distribution around the laser spot was determined from the fluorescence intensity distribution of Rh molecules on the liposomes. The control experiment for the temperature assay was also studied by introducing the biotin- and Rh-labelled liposome containing calcein without the CNT (1 mM) in the microchannel with a syringe. The fluorescence intensities of calcein, Rh and fluorescein were analysed by ImageJ. The artificial molecular-signalling experiment was performed by setting β-galactosidase from Escherichia coli (0.5 mg ml−1; Roche)/HEPES (pH 7.1) solution (ca. 20 μl) in the goal position reservoir.

Author contributions

E.M. conceived, designed, performed the experiments and also analysed the data. K.K. and E.Y. synthesized the liposomes. C.H. constructed the laser-irradiation system. E.M. prepared the paper. All authors discussed the results and contributed to the manuscript.

Additional information

How to cite this article: Miyako E. et al. Carbon nanotube–liposome supramolecular nanotrains for intelligent molecular-transport systems. Nat. Commun. 3:1226 doi: 10.1038/ncomms2233 (2012).

Supplementary Material

Supplementary Figure

Supplementary Figure S1

ncomms2233-s1.pdf (87.9KB, pdf)
Supplementary Movie 1

Directional movement of CNT–liposome nanotrains in the microdevice based on a straight microchannel.

Download video file (6.4MB, mov)
Supplementary Movie 2

Directional movement of DNA molecules in the microdevice based on a straight microchannel.

Download video file (4.1MB, mov)
Supplementary Movie 3

Switchback control of the CNT–liposome nanotrain motion.

Download video file (8.5MB, mov)
Supplementary Movie 4

Movement of CNT–liposome nanotrains in the microdevice based on bifurcated microchannel.

Download video file (6.2MB, mov)
Supplementary Movie 5

Navigation of simple-maze microchannel.

Download video file (3.3MB, mov)
Supplementary Movie 6

Navigation of complicated-maze microchannel.

Download video file (3.9MB, mov)
Supplementary Movie 7

Sequential calcein release by laser-induced-CNT–liposome nanotrains.

Download video file (2.9MB, mov)
Supplementary Movie 8

Microthermal effect by laser-induced CNT–liposome nanotrains.

Download video file (1.5MB, mov)
Supplementary Movie 9

Artificial molecular signalling triggered by laser-induced-CNT–liposome nanotrains.

Download video file (6.6MB, mov)

Acknowledgments

This work was supported by The Kao Foundation for Arts and Sciences, The Japan Prize Foundation and Grant-in-Aid for Young Scientists B (23700568). We are grateful to NOF (Tokyo, Japan) for providing the HSPC. We also thank Dr Kazunori Kawasaki (HRI, AIST) and Dr Takeyuki Uchida (IBEC centre, AIST) for TEM observations, Dr Hideya Nagata (Advanced Scientific Technology & Management Research Institute of Kyoto) for fruitful discussions, Mrs Keiko Nishio (HRI, AIST) and Ms Nahoko Naruishi (HRI, AIST) for assisting experiments.

References

  1. Alberts B. et al. Essential Cell Biology, 3rd edn (Garland, 2009). [Google Scholar]
  2. Weibel D. B. et al. Microoxen: microorganisms to move microscale loads. Proc. Natl Acad. Sci. USA 102, 11963–11967 (2005). [DOI] [PMC free article] [PubMed] [Google Scholar]
  3. Fischer T., Agarwal A., Hess H. A smart dust biosensor powered by kinesin motors. Nat. Nanotech. 4, 162–166 (2009). [DOI] [PubMed] [Google Scholar]
  4. van den Heuvel M. G. L., de Graaff M. P., Dekker C. Molecular sorting by electrical steering of microtubules in kinesin-coated channels. Science 312, 910–914 (2006). [DOI] [PubMed] [Google Scholar]
  5. Sanchez S., Ananth A. N., Fomin V. M., Viehrig M., Schmidt O. G. Superfast motion of catalytic microjet engines at physiological temperature. J. Am. Chem. Soc. 133, 14860–14863 (2011). [DOI] [PubMed] [Google Scholar]
  6. Wu J. et al. Motion-based DNA detection using catalytic nanomotors. Nat. Commun 1, 36 (2010). [DOI] [PubMed] [Google Scholar]
  7. Paxton W. F., Sundararajan S., Mallouk T. E., Sen A. Chemical locomotion. Angew. Chem. Int. Ed. 45, 5420–5429 (2006). [DOI] [PubMed] [Google Scholar]
  8. Orozco J. et al. Dynamic isolation and unloading of target proteins by aptamer-modified microtransporters. Anal. Chem. 83, 7962–7969 (2011). [DOI] [PubMed] [Google Scholar]
  9. Tamaru S. et al. Fluidic supramolecular nano- and microfibres as molecular rails for regulated movement of nanosubstances. Nat. Commun. 1, 20 (2010). [DOI] [PubMed] [Google Scholar]
  10. Wickham S. F. J. et al. Direct observation of stepwise movement of a synthetic molecular transporter. Nat. Nanotech. 6, 166–169 (2011). [DOI] [PubMed] [Google Scholar]
  11. Kudernac T. et al. Electrically driven directional motion of a four-wheeled molecule on a metal surface. Nature 479, 208–211 (2011). [DOI] [PubMed] [Google Scholar]
  12. Steed J. W., Gale P. A. Supramolecular chemistry: From molecules to nanomaterials (Wiley-VCH, 2012). [Google Scholar]
  13. Kono K. Thermosensitive polymer-modified liposomes. Adv. Drug Deliv. Rev. 53, 307–319 (2001). [DOI] [PubMed] [Google Scholar]
  14. Gaber M. H., Hong K., Huang S. K., Papahadjoponlos D. Thermosensitive sterically stabilized liposomes: Formulation and in vitro studies on mechanism of doxorubicin release by bovine serum and human plasma. Pharm. Res. 12, 1407–1416 (1995). [DOI] [PubMed] [Google Scholar]
  15. Yuba E., Harada A., Sakanishi Y., Kono K. Carboxylated hyperbranched poly(glycidol)s for preparation of pH-sensitive liposomes. J. Control. Release 149, 72–80 (2011). [DOI] [PubMed] [Google Scholar]
  16. Kono K., Igawa T., Takagishi T. Cytoplasmic delivery of calcein mediated by liposomes modified with a pH-sensitive poly(ethylene glycol) derivative. Biochim. Biophys. Acta 1325, 143–154 (1997). [DOI] [PubMed] [Google Scholar]
  17. Miyako E. et al. Photothermic regulation of gene expression triggered by laser-induced carbon nanohorns. Proc. Natl Acad. Sci. USA 109, 7523–7528 (2012). [DOI] [PMC free article] [PubMed] [Google Scholar]
  18. Miyako E. et al. A photo-thermal-electrical converter based on carbon nanotubes for bioelectronic applications. Angew. Chem. Int. Ed. 123, 12474–12478 (2011). [DOI] [PubMed] [Google Scholar]
  19. Miyako E., Nagata H., Hirano K., Hirotsu T. Carbon nanotube–polymer composite for light-driven microthermal control. Angew. Chem. Int. Ed. 47, 3610–3613 (2008). [DOI] [PubMed] [Google Scholar]
  20. Miyako E., Nagata H., Hirano K., Hirotsu T. Micropatterned carbon nanotube-gel composite as photothermal material. Adv. Mater. 21, 2819–2823 (2009). [Google Scholar]
  21. Miyako E., Nagata H., Hirano K., Hirotsu T. Laser-triggered carbon nanotube microdevice for remote control of biocatalytic reactions. Lab. Chip 9, 788–794 (2009). [DOI] [PubMed] [Google Scholar]
  22. Miyako E., Itho T., Nara Y., Hirotsu T. Ionic liquids on photoinduced nanotube composite arrays as a reaction medium. Chem. Eur. J. 15, 7520–7525 (2009). [DOI] [PubMed] [Google Scholar]
  23. Miyako E., Nagata H., Hirano K., Hirotsu T. Photodynamic thermoresponsive nanocarbon–polymer gel hybrids. Small 4, 1711–1715 (2008). [DOI] [PubMed] [Google Scholar]
  24. Miyako E. et al. Near-infrared laser-triggered carbon nanohorns for selective elimination of microbes. Nanotechnology 18, 475103 (2007). [Google Scholar]
  25. Karchemski F., Zucker D., Barenholz Y., Regev O. Carbon nanotubes–liposomes conjugate as a platform for drug delivery into cells. J. Control. Release 160, 339–345 (2012). [DOI] [PubMed] [Google Scholar]
  26. Sparreboom W., van den Berg A., Eijkel J. C. T. Principles and applications of nanofluidic transport. Nat. Nanotech. 4, 713–720 (2009). [DOI] [PubMed] [Google Scholar]
  27. van West P., Appiah A. A., Gow N. A. R. Advances in research on oomycete root pathogens. Physiol. Mol. Plant. Pathol. 62, 99–113 (2003). [Google Scholar]
  28. Fuerstman M. J. et al. Solving mazes using microfluidic networks. Langmuir 19, 4714–4722 (2003). [Google Scholar]
  29. Lagzi I., Soh S., Wesson P. J., Browne K. P., Grzybowski B. A. Maze solving by chemotactic droplets. J. Am. Chem. Soc. 132, 1198–1199 (2010). [DOI] [PubMed] [Google Scholar]
  30. Steinbock O., Tóth Á., Showalter K. Navigating complex labyrinths: optimal paths from chemical waves. Nature 267, 868–871 (1995). [DOI] [PubMed] [Google Scholar]
  31. Reyes D. R., Ghanem M. M., Whitesides G. M., Manz A. Glow discharge in microfluidic chips for visible analog computing. Lab Chip 2, 113–116 (2002). [DOI] [PubMed] [Google Scholar]
  32. Nakagaki T., Yamada H., Tóth Á. Maze-solving by an amoeboid organism. Nature 407, 470 (2000). [DOI] [PubMed] [Google Scholar]
  33. Li S. F. Y. Capillary Electrophoresis: Principles, Practice and Applications (Elsevier, 1992). [Google Scholar]
  34. Arata H. F., Rondelez Y., Noji H., Fujita H. Temperature alternation by an on-chip microheater to reveal enzymatic activity of β-galactosidase at high temperatures. Anal. Chem 77, 4810–4814 (2005). [DOI] [PubMed] [Google Scholar]
  35. Hosokawa C., Kudoh S. N., Kiyohara A., Taguchi T. Optical trapping of synaptic vesicles in neurons. Appl. Phys. Lett. 98, 163705 (2011). [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

Supplementary Figure

Supplementary Figure S1

ncomms2233-s1.pdf (87.9KB, pdf)
Supplementary Movie 1

Directional movement of CNT–liposome nanotrains in the microdevice based on a straight microchannel.

Download video file (6.4MB, mov)
Supplementary Movie 2

Directional movement of DNA molecules in the microdevice based on a straight microchannel.

Download video file (4.1MB, mov)
Supplementary Movie 3

Switchback control of the CNT–liposome nanotrain motion.

Download video file (8.5MB, mov)
Supplementary Movie 4

Movement of CNT–liposome nanotrains in the microdevice based on bifurcated microchannel.

Download video file (6.2MB, mov)
Supplementary Movie 5

Navigation of simple-maze microchannel.

Download video file (3.3MB, mov)
Supplementary Movie 6

Navigation of complicated-maze microchannel.

Download video file (3.9MB, mov)
Supplementary Movie 7

Sequential calcein release by laser-induced-CNT–liposome nanotrains.

Download video file (2.9MB, mov)
Supplementary Movie 8

Microthermal effect by laser-induced CNT–liposome nanotrains.

Download video file (1.5MB, mov)
Supplementary Movie 9

Artificial molecular signalling triggered by laser-induced-CNT–liposome nanotrains.

Download video file (6.6MB, mov)

Articles from Nature Communications are provided here courtesy of Nature Publishing Group

RESOURCES