Skip to main content
PMC home page
Nature Portfolio logoLink to Nature Portfolio
. 2013 Dec 18;4:3013. doi: 10.1038/ncomms4013

Topological structure dynamics revealing collective evolution in active nematics

Xia-qing Shi 1,2, Yu-qiang Ma 1,2,a
PMCID: PMC3905717  PMID: 24346733

Abstract

Topological defects frequently emerge in active matter like bacterial colonies, cytoskeleton extracts on substrates, self-propelled granular or colloidal layers and so on, but their dynamical properties and the relations to large-scale organization and fluctuations in these active systems are seldom touched. Here we reveal, through a simple model for active nematics using self-driven hard elliptic rods, that the excitation, annihilation and transportation of topological defects differ markedly from those in non-active media. These dynamical processes exhibit strong irreversibility in active nematics in the absence of detailed balance. Moreover, topological defects are the key factors in organizing large-scale dynamic structures and collective flows, resulting in multi-spatial temporal effects. These findings allow us to control the self-organization of active matter through topological structures.

Inline graphicTopological defects are observed in a range of active systems, but their dynamical properties are largely unknown. Here, the authors use a simulation of self-propelled hard-rods to generate topological defects in active nematics, finding that their anomalous dynamics may lead to large-scale collective motions.

Topological defects are singular points or lines surrounded by spatially varying order parameter fields. They emerge as a local manifestation of spatial heterogeneity of large-scale order and play a critical role in determining the physical property of matters ranging from early universe to materials in our daily life1,2,3,4. Recently, they have also been widely observed in active matter composed of self-propelled entities in states of exotic collective motion5,6,7,8,9,10,11,12,13,14,15,16. Active matter represents a new state of matter where large-scale mass flow emerges through the self-organization of interacting self-propelled particles. One common feature in active systems is the abnormal large density fluctuations, which are accompanied with highly dynamical collective swirling and swarming motions of active particles15,16. The nematic state of active matter is of particular interest, where genuine giant number fluctuations are predicted by theory and verified in experiment on driven rods10,17.

In the experiment by V. Narayan et al.10, the ballistic motion of topological defects is first observed and such motion shows the evidence of curvature-driven flows, which are predicted to be ubiquitous in active nematics13,14,17. In cytoskeleton mixtures, nematic aligned extensile microtubule bundles may spontaneously buckle, accompanied with the unbinding of topological defects8. It is well-known that, in equilibrium 2-dimensional (2D) system, the spontaneous unbinding of topological defects is a sign that the system enters into isotropic state18. In contrast to the well-known physical property of topological defects in equilibrium, in active system we still lack a clear picture of the route from the microscopic dynamics of active particles to their collective evolutions. Especially, despite knowledge about the collective motion of active nematics, it is still unclear how topological defects emerge and affect the exotic non-equilibrium behaviour in active nematics.

Here, to explore the general behaviour of topological defects, we combine simulation and analytical methods to study a 2D system of self-driven granular elliptic rods on a substrate, where we take the effect of collisions among particles explicitly into account. The model is a particle-based dry active nematic system without media fluids. It eliminates the effects of fluid dynamics on particles, which facilitates the construction of a corresponding kinetic theory. We reveal not only general dynamics of topological structures but also their roles in large-scale collective motions in such active media. First, the self-driven motion, dissipation and mutual collisions among particles break detailed balance in active media. Without detailed balance, in the process of spontaneous creation of topological defect pair, local polar disclination hinders immediate reversible annihilation and triggers active unbinding of topological defect pair. Collective motion arises in response to asymmetrical ordered structures near topological defects, which also drive super-diffusive motion of polar defects. Second, we find that the time regime for large-scale relaxation coincides with the regime of super-diffusivity of polar disclination. The system is in a state of chaos with the emergence of large-scale particle flows driven by non-static curved nematic field whose dynamics is governed by the spontaneous excitation, transportation and annihilation of topological defects. Once they are spontaneously unbound, topological defects cannot be eliminated by local adjustment except through mutual annihilation of opposite disclinations. As a result, the dynamics of these topological structures likely govern the system’s giant number fluctuations and their relaxations. The close correspondence between the dynamics of topological defects and multi-spatial temporal effects of the relaxation suggests a way to control collective motion in active media through tracking and manipulating topological defects in real time.

Results

Excitation of topological defects in active nematics

In 2D simulations of active nematics, we drive, typically, several thousands of hard elliptic rods along their own major axes. The driving force represents a simplification for the micro-driving along agitated rod or dragged filament7,10. To ensure head-tail symmetry of every particle, it can switch between forward and backward directions randomly after τ simulation sweeps on average (see Methods). In active nematic state, our simulations also observe typical topological defects shown in Fig. 1a–d. Figure 1e-h displays a process of the spontaneous excitation of topological defect pairs kd=1/2 and −1/2, which is created together obeying topological constraint in a formerly defect-free region. In the early stage (Fig. 1f), they are close to each other and distort the order-parameter field locally.

Figure 1. Spontaneous excitation of topological defects and their dynamics.

Figure 1

Open in a new tab

(a–d) Typical order parameter fields near the singular points of topological defects in 2D nematic state. If we follow a loop enclosing the singular point, we shall experience a total change of order parameter’s angle θ by Inline graphicds=2πkd, where s is the distance on the loop Γ and the disclination number kd indicates the strength of topological defect4. We have disclination number (a) kd=1/2, (b) kd=−1/2, (c) kd=1 (aster), and (d) kd=1 (vortex), respectively. (e–h) The process of the creation and separation of topological defects pair of disclination kd=1/2 (red spot) and −1/2 (cyan spot) for the mean particle number density ρ=4.6. The polar disclination kd=1/2 shows directional motion, while disclination kd=−1/2 is relatively idle in moving as required by local symmetry. (i) Average motion of topological defects in log-log plot and linear plot (inset). In active media, disclinations kd=1/2 (red solid square) show superdiffusivity in long-time regime, while kd=−1/2 (red square) exhibits weak subdiffusivity. Both kd=1/2 and −1/2 in equilibrium show sub-diffusivity.

Anomalous dynamics of topological defects

In equilibrium 2D nematic state, emerging defect pair must be tightly bound and would be reversibly annihilated18,19. In active nematics, however, we observe a fast separation of topological defects created as a pair (see Fig. 1f–h). To further qualitatively characterize the dynamic disparities between active and non-active media, we track the motions of topological defects in both systems (see Methods). Let us define Inline graphic as the average distance travelled by +1/2 and −1/2 disclinations for a period t after their creation at time Inline graphic, respectively. Inline graphic and Inline graphic are the initial positions of +1/2 and −1/2 disclinations of the spontaneously created defect pair i, and disclinations’ lifetimes are Inline graphic and Inline graphic, respectively. Inline graphic if Inline graphic, else Inline graphic.

In Fig. 1i, after an initial weak diffusive regime, we witness the supper-diffusive behaviour of +1/2 disclination, while −1/2 disclination exhibits weak subdiffusive behaviour in active media. In contrast, in non-active system, +1/2 disclination exhibits the same subdiffusive dynamics as −1/2 disclination. Thus, although topological defects in active system share the same mathematical description with their counterparts in non-active system, these same structures will give rise to totally different dynamical behaviours.

Effects of micro-driving on the motion of defects

To understand this major difference, let us focus on the microscopic level. We notice that in active media the presence of persistent micro-driving along a particle’s long axis breaks the detailed balance condition. As a result asymmetric structures may induce particle flows that are forbidden in equilibrium10,20,21,22. Here the asymmetric structures are self-emergent in the nematic field with the excitation of topological defect pairs. Defect of kd=1/2 with local polarity thus tends to move almost unidirectionally away from defect of kd=−1/2 after their co-emergence. In Fig. 2a–h, we measure how the kinetics of micro-driving affects the motion of defects. We start from a configuration with only a pair of defects (see Fig. 2e) and track their motion. In Fig. 2a–d, the moving trajectories of defects convince the disparities between the dynamics of kd=−1/2 (Fig. 2a,c) and kd=+1/2 (Fig. 2b,d), as also demonstrated in Figure 1i. Further, with the increase of average driving velocity v0 and persistent driving time τ, the motion of defect kd=1/2 speeds up significantly. As shown in Fig. 2g, the end-to-end distance ΔL for kd=1/2 grows with the increase of v0 and τ.

Figure 2. The motion of a single pair of topological defects.

Figure 2

Open in a new tab

(a–d) Moving trajectories of topological defects. (a) (kd=−1/2) and (b) (kd=1/2) are the trajectories for a fixed τ (=6.0) and v0 varying from 0.002 to 0.02. (c) (kd=−1/2) and (d) (kd=1/2) are the cases where τ varies from 2 to 20 with v0=0.012. All the simulations start from the same configuration as shown in (e), and run 2 × 105 simulation sweeps. Every trajectory is obtained by averaging 10 independent runs. (e) Configuration of topological defects pair at the beginning of simulations. (f) Polarity field near topological defects. To obtain the polarity field in simulation, the system is coarse-grained into 60 × 60 periodic square lattice cells, each with side length 0.5 in particle length. The polarity field is obtained by averaging Inline graphic (which represents instantaneous driving direction of particle, see Methods) of particles whose centre of mass locate in local unit cell. The average is performed over 5 × 103 (≫τ) continuous simulation sweeps and 100 independent runs starting from (e). Arrows indicate polar field in local unit cells. Both the colour scale and length of arrow indicate the magnitude of local polarity. (g) End-to-end distances ΔL of the moving trajectories of topological defects. (h) The maximum local polarity Inline graphic near +1/2 defect extracted from the polar field as shown in (f).

To elucidate the structural basis for the anomalous dynamics of topological defects, we calculate the distribution of local polarity field p(r) by coarse-graining and short-time averaging the simulation system. Figure 2f shows the snapshot of the polarity field p(r) near topological defect pair, where the maximum of p(r) locates near the discontinuity of defect kd=+1/2. For a finite τ, a simple analysis of Equation (7) shows that the distorted nematic alignment will induce the emergence of local polarity, which depends linearly on v0 and τ (see supplementary Equation (15) in Supplementary Discussion). In Fig. 2h, with the increase of τ and v0, we show the monotonic increase of maximum local polarity Inline graphic. Corresponding to the growth of ΔL as shown in Fig. 2g, such behaviour manifests that the weak but statistically significant polar arrangement of particles near kd=+1/2 defect favours to push the +1/2 defect away from −1/2 defect.

The interaction and annihilation of topological defects

With the excitation and active separation of disclinations, the interaction between disclinations and their mutual annihilations are unavoidable23,24 (see Supplementary Movie 1). In Fig. 3a–c, we show typical snapshots for the collision process between polar disclinations Inline graphic and the formation of transient aster-like structure with disclination number kd=1. After that, in Fig. 3d, the aster degrades into two polar disclinations again. In Fig. 3e,f, annihilation of kd=1/2 and −1/2 takes place, resulting in remarkable transformation of local nematic director field. Figure 3g shows the number of defects with significant fluctuations, revealing dynamical equilibrium between excitation and annihilation of disclinations.

Figure 3. Interaction and annihilation of topological defects.

Figure 3

Open in a new tab

(a–c) Collision between two disclinations of kd=1/2 and the formation of a transient aster (kd=1). (d–f) Decomposition of aster and annihilation of kd=1/2 and −1/2. (g) Simulation time sequences of number of defects (ND) in the system for ρ=4.6 in active simulation. kd=1/2 (red) and −1/2 (black) have the same number in the system. (h,i) Configurations of local particle arrangement, (h) before annihilation and (i) after excitation.

The annihilation process of disclination pair is not a simple reversion of its creation in such active media. Dynamical irreversibility will hinder the immediate annihilation of disclination pairs generated together. We notice that the configuration of disclination pair before its annihilation is different from that after its creation, as shown in Fig. 3e and Fig. 1f, respectively, which are also illustrated in Fig. 3h,i for clarity. After the spontaneous creation, the polar defect kd=1/2 is always on one of the apolar defect’s three branches (as shown in Fig. 3i) and tends to move away from kd=−1/2. In the annihilation configuration (as shown in Fig. 3h), the polar defect approaches the −1/2 defect through the valley between the latter’s two branches. Dynamically, these configurations greatly facilitate the corresponding processes.

Instability and the microscopic collision processes

A direct consequence of the spontaneous excitation of topological defect pairs and their irreversible separations is the breakdown of quasi-long-range nematic order. In Fig. 4a,b with the increase of mean particle number density ρ, we find that the order properties of active nematics are directly related to the quantities of topological defects. The measured appearant nematic order parameter Inline graphic is defined as the positive eigenvalue of matrix Inline graphic and nematic spatial correlation Inline graphic, where N is total particle number, uα(i) is the αth component of the ith particle orientation vector u(i)=(cosθi, sinθi) and ri is the position of its centre of mass. Inline graphic represent temporal average. As shown in Fig. 4a,b, to our surprise, we observe the breakdown of quasi-long-range nematic order in high density regime; in low density regime, however, the system achieves such order as indicated by the well-known power law decay, that is, g2(r)Inline graphicr−η. The non-active system, on the contrary, shows opposite tendency and attains topological order in high density regime. In accordance with the behaviours of Inline graphic and g2(r), we identify that the mean topological defect number increases with the breakdown of quasi-long-range order in active simulations (see the inset of Fig. 4a and snapshots of Fig. 4c,d).

Figure 4. Breakdown of topological nematic order in high density regime.

Figure 4

Open in a new tab

(a) Transition curves of Inline graphic for active nematics (red) and equilibrium ones (black). The inset shows the mean number of topological defects in active simulations, where mean total number (black) is the sum of the numbers for kd=1/2 (red) and kd=−1/2 (blue). (b) g2(r) for active (solid curve) and equilibrium (dashed curve) systems. Active system only exhibits algebraic order in low density regime. (c,d) Simulation snapshots for active system with (c) ρ=3.1 and (d) ρ=4.6. Note the transient excitation of vortex in d. (e,f) Driving-induced collision processes in highly dissipative system. The blue arrows indicate the direction of motion for particles on collision. Grey particles indicate the configurations before collision. Particle rotations depend on relative positions and angles between particles. In e, the colliding particle (red) tends to align with the collided particle (blue), while the collided particle tends to rotate away. In f, both particles align with each other. (g,h) Two different processes causing the instability of nematic alignment. Black lines indicate the bulk nematic alignment. Blue curves indicate the bending deformations of nematic alignment caused by fluctuations. Yellow arrows indicate the direction of motion for particles on collision. Green arrows indicate the direction of particle’s rotation caused by collision.

As illustrated in Fig. 4e–h, we show the microscopic collision processes leading to order and dynamic instability in low and high density regimes, respectively. Figure 4e,f shows two basic modes of collision-induced rotations, which depend on relative positions and angles between particles25,26,27,28,29. Particles in Fig. 4e rotate in the same direction upon collision, which actually has no contribution to local alignment. The collision in Fig. 4f, however, causes a net alignment. This nematic alignment collision is extensively studied by simulation and kinetic theory25,29,30; however, the effect of the collision process as shown in Fig. 4e on collective motion of active system is not well-understood. In Methods and Supplementary Discussion we give a detailed account of collision-induced rotations based on dynamic mean-field analysis. As given by Supplementary Equations (8) and (9) in Supplementary Discussion, the first terms on the right sides of these two equations give the rotations of the colliding (red) particles in Fig. 4e,f, whereas the second terms give the effect of rotations of the collided (blue) particles. Since the system is highly dissipative, the angular information exchanged upon collision holds long enough to facilitate order in low density, which causes enhanced ordering effect26. As shown in Supplementary Equation (23) in Supplementary Discussion, the isotropic nematic transition could take place at extremely low density if the rotational self-diffusion Dr approaches zero. In simulations Dr is set as 0, thus this analytical result explains the low density nematic order in simulations as shown in Fig. 4a.

The calculations in Supplementary Discussion further reveal two typical ways causing dynamic instability in high-density regime. Supplementary Equation (28) in Supplementary Discussion shows that the linear instability of bending deformation leads to the breakdown of nematic order, and such instability has two contributions as illustrated in Supplementary Equations (18)–(20) in Supplementary Discussion. As shown in Fig. 4g, one process deforming nematic alignment is the rotation of particles triggered by collisions from two sides of the inflection region of bending fluctuations. Another process enhancing bending is shown at the peak or valley region of bending fluctuations in Fig. 4h. When particles in these region are colliding particles on their flanks, they tend to align with particles on each side, which further sharpens the local curvature.

Abnormal density fluctuations and relaxations with defects

The instability leads to the nonlinear spontaneous excitation of topological defect pairs. The separation of created topological defects induces large-scale bending and splay of nematic director field, which further drive large-scale particle flows10,17,31,32,33. The system is characterized by the nonperiodic recurrence of collective particle flows that span spatial-temporal scales much larger than that can be achieved by the individual constituent (see Supplementary Movie 2). Such state distinguishes from conventional steady state which requires constant fluxes.

The collective swarming and swirling motions lead to highly dynamic density inhomogeneity and abnormal density fluctuations. To quantify the spatial property of such density inhomogeneity, we measure the root mean square deviation ΔN of a given area A by using the relation

graphic file with name ncomms4013-m17.jpg

where g(r) is the radial distribution function and the integrals are performed over a region A with mean particle number Inline graphic (ref. 4.) It is also measured directly by its definition Inline graphic (ref. 10). These two methods give the same results as shown in Fig. 5a, where ΔN/Inline graphic versus Inline graphic is plotted. In the regime Inline graphic<<1 (that is, Aρ0<<1), ΔN/Inline graphic varies as Inline graphic, since g(r)=0 (for r<b, b is a particle’s semiminor axis) as a result of exclude volume effect. It explains why all the curves coincide and exhibit the first drop when Inline graphic<1 in Fig. 5a34,35.

Figure 5. Spatial and temporal characterization of giant number fluctuations.

Figure 5

Open in a new tab

(a) Spatial number fluctuations are measured in active state (solid line) and compared with equilibrium simulations in the same densities (dashed line). Corresponding circles (cyan and green) show the results obtained by using Equation (1). (Inset) Typical radial distribution function g(r) for active state (solid line) and equilibrium state (dashed line). (b) Multi-time scale relaxations of local number autocorrelations in active simulations. Logarithmic decays are observed in short-time regime. In the long-time regime the decay slows down and forms slowly declining floors. (c) Self-diffusion in active system. Super-diffusive, subdiffusive and normal diffusions are observed on different time regimes. (Inset) Density dependence of the long-time diffusive behaviour for T=4 × 105τ. Circles are simulation data and solid line indicates exponential decay.

Abnormal large fluctuations in active nematics are clearly illustrated when their curves diverge from the equilibrium cases for Inline graphic>1. Giant number fluctuations are observed for the case where quasi-long-range alignment becomes unstable. The green line in Fig. 5a, indicating ΔNInline graphicInline graphic, represents the most sharp increase of fluctuations we observe. With the increase of density, the system becomes more compact and the fluctuations decrease accordingly34. The giant number fluctuations found here is a result of the large-scale dynamic evolution of the strongly segregated patterns shown in Fig. 4d and Supplementary Movie 2. Such evolution is driven by the deformation of nematic director fields as a consequence of the emergence of topological defects. The large voids found in Fig. 4d and Supplementary Movie 2 actually are just vortex defects or the combination of two +1/2 defects on the void’s boundary.

To investigate the relaxation processes of abnormal fluctuations, we measure the autocorrelation Inline graphic, where nL(t) is the particle number in a given square of side length L at time t and Inline graphic is its average number. We also measure the particle’s time-dependent mean-square-displacement Inline graphic, which characterizes the dynamic property of particle motion.

In short-time regime for t<200 τ, as shown in Fig. 5b, the autocorrelation ϕL(t) shows fast logarithmic decay10. Correspondingly, as shown in Fig. 5c, Inline graphic in this regime first exhibits super-diffusive and consequent subdiffusive behaviour as a result of driving- and collision-induced local caged adjustments, respectively. In the long-time regime, the logarithmic decay of ϕL(t) slows down after about 200 τ. This regime of slow decay coincides with the super-diffusive regime of topological defect kd=1/2 (Fig. 1i), and the height of the slowly declining floor is positively related to the strength of density inhomogeneity shown in Fig. 5a. They suggest a mutual correspondence between the relaxation of density inhomogeneities and the dynamics of topological defects. Furthermore, once topological defects are generated, they cannot be easily eliminated except through mutual annihilation. Such a conservative property make them play an important role in the large-scale collective dynamics of the system.

After 105τ, ϕL(t) approaches zero and Inline graphic approaches the final diffusive behaviour, indicating that density inhomogeneities are not static and no stable constant global particle flows exist in the system, in accordance with seemingly random spontaneous behaviours of topological defects. Furthermore, the inset of Fig. 5c shows that the self-diffusivity decreases exponentially with the increase of particle density. This notable effect is also observed in experiments36.

Discussion

The following two aspects are of extreme importance for both the understanding and further application of active matter. The first is the emergence of new dynamic structures in active matter, which is impossible or difficult to realize in equilibrium. The second is the novel dynamics and functionality of specific structures in active matter. The study of active media thus is useful both for generating structures and realizing dynamical properties to fulfil novel functions unachievable in non-active media. In this study, we just focused on the above two aspects of topological defects in active nematics.

Although topological defects may emerge both in active and non-active media, the dynamics of disclinations is qualitatively different in these two situations: polar disclination (kd=1/2) in non-active nematics is found bound with disclination kd=−1/2, while in active nematics, it shows strong super-diffusive motion (see Fig. 1i). In recent experiments of both driven granular rods and microtubules7,10, polar topological defects do show evidence of super-diffusive motions, although they are not critically determined by statistical measurement. On the other hand, the transportation behaviour of polar disclination in active nematics shows strong dynamical irreversibility that hinders the immediate annihilation of co-emerging polar and apolar disclinations. Local configuration of disclination pair determines the path to their annihilation or unbinding.

Furthermore, the abnormal dynamics of topological defects not only drives the instability of quasi-long-range nematic order but also plays a critical role in the collective motion and giant number fluctuations in the system. After the spontaneous excitation, the polar disclination point will move away from the co-emerging apolar disclination. This process inevitably induces large-scale bending and splay of nematic director field, which further drive large-scale particle flows. Since the spontaneous excitation, active separation and annihilation of disclinations are genuinely aperiodic and endless, the system can only stay in a dynamical state with ever evolving large-scale particle flows. It distinguishes from conventional steady state which requires constant fluxes. The system is characterized by the non-periodic recurrence of collective particle flows that span spatial-temporal scales much larger than that can be achieved by its individual constituent. These collective swarming and swirling motions lead to highly dynamic density inhomogeneity and abnormal density fluctuations. More interestingly, by measuring the autocorrelation of local density and comparing with the corresponding spatial fluctuations, we reveal that the time regime for large-scale density relaxation coincides with the regime of super-diffusivity for polar disclinations. The density relaxation thus is organized by the motion of topological defects, which can be eliminated only by mutual annihilation.

The dry system simulated here is different from active nematics in fluid media37,38,39,40. As a result of momentum conservation, in such wet active nematics, fluid flows driven by the activity of self-propelled particles play important roles in the collective motion of the system. Giomi et al.39 recently show the drift motion of topological defects of kd=1/2 in extensile wet active nematics, and the so-called backflow is found playing an important role in defects dynamics. Alignment parameter (that is, flow aligning parameter38) that serves as a feedback of fluid flow on nematic order is also found to be important for the emergence of topological defects37,40. The dry active nematics here, however, suggest a different mechanism for anomalous behaviour of topological defects. Collision-induced rotation is found important for the emergence of topological defects. Interestingly, we further identify weak polarity field near the topological defects, and its strength is found closely related to the drift speed of topological defects of kd=1/2. Such polarity field is enslaved to the spatial variation of nematic order and might play an important role in the evolution of topological defects, similar to the role of fluid flows in wet active nematics.

In addition, the mean-field theory is used to helpfully understand the above nematic ordering and dynamic instability in low and high-density regimes, respectively. The present theory is similar to that of Baskaran and Marchetti on self-propelled rods26,27,28, and the major difference is that here a reversal rate of driving directions is applied. Furthermore, during the collision process, in their model they apply energy and momentum conserving law upon collision, but here we directly start from simple collision rules. In active system, due to the complexity of self-propelling entities and the frictions of substrate, the collision process does not conserve the kinetic energy and momentum. The present collision rules allow us to examine the effects of different collision processes on collective behaviours. There are two major collision processes in our theory. The nematic alignment collision process shown in Fig. 4f is widely used to explain the nematic ordering in driven rods system25,29,30,32. To our knowledge, the previous models that only include nematic alignment collision will not drive the active unbinding of topological defect pair as described here. On the other hand, our theory shows that the instability in the high-density regime is mainly caused by the collision process as shown in Fig. 4e. With such instability, the hydrodynamic theory of Ramaswamy et al.17 on active nematics that predicts giant number fluctuations in 2D is not applicable in our situation. However, the observation of curvature driven flows still plays a critical role in large-scale relaxations.

The major results of this paper can be readily tested in systems of driven granular rods and mobility assay experiments6,7,8,10. For further applications, our study suggests a way to control collective evolution in active media through tracking and manipulating topological defects in real time. For example, we could speed up or slow down the relaxation of density fluctuations by directly driving or pinning polar defects, respectively. It would be more interesting, if these could be achieved by adding particles of different dynamic properties. Such manipulations could be implemented both in future experiments and theoretical studies.

Methods

Simulation

In active simulation, the state of an ellipse particle j at simulation step n is denoted by the position of its centre of mass Inline graphic and the angle of major axis Inline graphic. We perform three basic trial operations on the position and angle of particles:

graphic file with name ncomms4013-m35.jpg
graphic file with name ncomms4013-m36.jpg
graphic file with name ncomms4013-m37.jpg

where v0 is the average velocity along the particle axis and Inline graphic. Inline graphic is +1 or −1, indicating that the particle is moving in the direction of Inline graphic or Inline graphic, respectively. Inline graphic will change or maintain its sign randomly every τ simulation sweeps on average through abiding by the Poisson distribution. Inline graphic is a delta-correlated vector white noise with its norm Inline graphic≤1, and Inline graphic and Inline graphic are scalar white noises (Inline graphic[0,1] and Inline graphic[−π/2,π/2]). In Equation (2), Inline graphic gives an average driving velocity v0. Inline graphic and Inline graphic together give a coloured noise with mean zero and a finite correlation time τ. Collision event takes place if the renewed space occupied by particle j overlaps with other particles. Inline graphic is 1 if particle j collides with or is collided by other particles during major-axial driving operation Equation (2) in step n−1, otherwise it is 0. Thus operations Equations (3) and (4) are collision-induced translational and rotational motions caused by major-axial driving. σ1 and σr are two parameters controlling the strengthes of translational and rotational motions, respectively. Taking hard-core interactions into consideration, the trial movements in Equations (2)–(4) are set to zero if the corresponding updated configurations overlap with other particles. Finally, the states of particles are updated as:

graphic file with name ncomms4013-m53.jpg
graphic file with name ncomms4013-m54.jpg

In active simulations, the elliptic particles have the same aspect ratio as particles used in previously reported experiments10, that is, a/b=5.75, where a and b are semi major and minor axes of the particle, respectively. The major axis L=2a is used as unit length. Periodic conditions are used in simulations with system size d=30. The dynamic parameters v0=0.012, σ1=0.004, σr=0.015, and τ=6 are used in simulations unless otherwise indicated.

We also perform classic equilibrium Monte-Carlo simulation using the same hard elliptic particles as those in active simulations. In equilibrium simulation, particles only perform translational and rotational movements conforming detailed balance to track physically most probable and realistic kinetic process.

Defect identification and tracking

To identify topological defects in simulations, we first assign an angle ϕ(r) on every site r of a square lattice. ϕ(r) is given through tanϕ(r)=Inline graphic, where w(r−ri) is a weight function and ri and θi are the location and angle of the ith particle, respectively. In practice, we choose a gaussian form, w(r−ri)=Inline graphic, where r‖ and r⊥ are the parallel and normal components of r−ri relative to the major axis of particle i19. Topological defects are identified by observing a net change of ϕ when we follow a closed loop on the lattice. The location of Inline graphic Inline graphic topological defects is determined by the centre of the smallest square with 2π (−2π) clockwise changes of ϕ. In analysis, the size of lattice is L/4, δ‖=2a=L, and δ⊥=2b.

Dynamic mean-field theory

To describe the spatial and angular number density distributions of particles, we introduce one-body distribution function f±(r,u,t) for the particles that are driving in the direction of u or −u at time t, respectively. Further, we denote ω±(r,u,t) as the collision-induced rotation rates of particles that are driving in the ± direction when the collision takes place. The most simplified dynamic mean-field equations that include the driving- and collision-induced rotation processes in the approximation of Itô-formalism41 are given by

graphic file with name ncomms4013-m59.jpg

where Inline graphic=u × ∂u. The second term on the left-hand side of the equation represents the switching between two driving states with rate k (Inline graphic1/τ in simulation) and the third term is the instantaneous drift term with an average velocity v (=Inline graphic, where Inline graphic represents time average in simulation). On the right-hand side, the first term represents the self-rotational diffusion caused by driving noises, and the second term is the contribution of collision-induced rotations. Detailed analysis is given in Supplementary Fig. 1 and Supplementary Discussion.

Author contributions

X -q.S. and Y -q.M. conceived and designed the simulations, performed the simulations, analysed the data and co-wrote the paper. Both authors discussed the results and commented on the manuscript.

Additional information

How to cite this article: Shi, X.-q. and Ma, Y.-q. Topological structure dynamics revealing collective evolution in active nematics. Nat. Commun. 4:3013 doi: 10.1038/ncomms4013 (2013).

Supplementary Material

Supplementary Figure, Discussion and References

Supplementary Figure 1, Supplementary Discussion and Supplementary References

ncomms4013-s1.pdf (254.8KB, pdf)
Supplementary Movie 1

Collision and annihilation of disclinations.

Download video file (2.3MB, mov)
Supplementary Movie 2

The recurrence of large-scale density inhomogeneity in active nematics.

Download video file (2.8MB, mov)

Acknowledgments

We are thankful to the Advanced Study Group ‘Statistical Physics of Collective Motion’ of the Max Planck Institute for the Physics of Complex Systems (MPIPKS) in Dresden for Shi's visit during the revision of this paper. We thank H. Chaté, S. Ramaswamy and M. C. Marchetti for helpful discussions during the period of Advanced Study Group. This work was supported by the National Natural Science Foundation of China (Nos. 91027040, 11204194, and 31061160496) and the National Basic Research Program of China (No. 2012CB821500).

References

  1. Mermin N. D. The topological theory of defects in ordered media. Rev. Mod. Phys. 51, 591–648 (1979). [Google Scholar]
  2. Kibble T. Phase-transition dynamics in the lab and the universe. Phys. Today 60, 47–52 (2007). [Google Scholar]
  3. Senyuk B. et al. Topological colloids. Nature 493, 200–205 (2013). [DOI] [PubMed] [Google Scholar]
  4. Chaikin P. M. & Lubensky T. C. Principles of Condensed Matter Physics Cambridge University Press (1995). [Google Scholar]
  5. Nédélec F. J., Surrey T., Maggs A. C. & Leibler S. Self-organization of microtubules and motors. Nature 389, 305–308 (1997). [DOI] [PubMed] [Google Scholar]
  6. Schaller V. & Bausch A. R. Topological defects and density fluctuations in collectively moving systems. Proc. Natl. Acad. Sci. USA 110, 4488–4493 (2013). [Google Scholar]
  7. Sumino Y. et al. Large-scale vortex lattice emerging from collectively moving microtubules. Nature 483, 448–452 (2012). [DOI] [PubMed] [Google Scholar]
  8. Sanchez T. et al. Spontaneous motion in hierarchically assembled active matter. Nature 491, 431–434 (2012). [DOI] [PMC free article] [PubMed] [Google Scholar]
  9. Surrey T., Nédélec F., Leibler S. & Karsenti E. Physical properties determining self-organization of motors and microtubules. Science 292, 1167–1171 (2001). [DOI] [PubMed] [Google Scholar]
  10. Narayan V., Ramaswamy S. & Menon N. Long-lived giant number fluctuations in a swarming granular nematic. Science 317, 105–108 (2007). [DOI] [PubMed] [Google Scholar]
  11. Palacci J. et al. Living crystals of light-activated colloidal surfers. Science 339, 936–940 (2013). [DOI] [PubMed] [Google Scholar]
  12. Blair D. L., Neicu T. & Kudrolli A. Vortices in vibrated granular rods. Phys. Rev. E 67, 031303 (2003). [DOI] [PubMed] [Google Scholar]
  13. Toner J., Tu Y. & Ramaswamy S. Hydrodynamics and phases of flocks. Ann. Phys. 318, 170–244 (2005). [Google Scholar]
  14. Ramaswamy S. The mechanics and statistics of active matter. Annu. Rev. Condens. Matter Phys. 1, 323–345 (2010). [Google Scholar]
  15. Vicsek T. & Zafeiris A. Collective motion. Phys. Rep. 517, 71–140 (2012). [Google Scholar]
  16. Marchetti M. C. et al. Hydrodynamics of soft active matter. Rev. Mod. Phys. 85, 1143–1189 (2013). [Google Scholar]
  17. Ramaswamy S., Simha R. A. & Toner J. Active nematics on a substrate: Giant number fluctuations and long-time tails. Europhys. Lett. 62, 196–202 (2003). [Google Scholar]
  18. Kosterlitz J. M. & Thouless D. J. Ordering, metastability and phase transitions in two-dimensional systems. J. Phys. C: Solid State Phys. 6, 1181–1203 (1973). [DOI] [PubMed] [Google Scholar]
  19. Frenkel D. & Eppenga R. Evidence for algebraic orientational order in a two-dimensional hard-core nematic. Phys. Rev. A 31, 1776–1787 (1985). [DOI] [PubMed] [Google Scholar]
  20. Jülicher F., Ajdari A. & Prost J. Modeling molecular motors. Rev. Mod. Phys. 69, 1269–1281 (1997). [Google Scholar]
  21. Galajda P., Keymer J., Chaikin P. & Austin R. A wall of funnels concentrates swimming bacteria. J. Bacteriol. 189, 8704–8707 (2007). [DOI] [PMC free article] [PubMed] [Google Scholar]
  22. Sokolov A., Apodaca M. M., Grzybowski B. A. & Aranson I. S. Swimming bacteria power microscopic gears. Proc. Natl. Acad. Sci. USA 107, 969–974 (2010). [DOI] [PMC free article] [PubMed] [Google Scholar]
  23. Goren G., Procaccia I., Rasenat S. & Steinberg V. Interactions and dynamics of topological defects: Theory and experiments near the onset of weak turbulence. Phys. Rev. Lett. 63, 1237–1240 (1989). [DOI] [PubMed] [Google Scholar]
  24. Tóth G., Denniston C. & Yeomans J. M. Hydrodynamics of topological defects in nematic liquid crystals. Phys. Rev. Lett. 88, 105504 (2002). [DOI] [PubMed] [Google Scholar]
  25. Ginelli F., Peruani F., Bär M. & Chaté H. Large-scale collective properties of self-propelled rods. Phys. Rev. Lett. 104, 184502 (2010). [DOI] [PubMed] [Google Scholar]
  26. Baskaran A. & Marchetti M. C. Enhanced diffusion and ordering of self-propelled rods. Phys. Rev. Lett. 101, 268101 (2008). [DOI] [PubMed] [Google Scholar]
  27. Baskaran A. & Marchetti M. C. Self-regulation in self-propelled nematic fluids. Eur. Phys. J. E. 35, 95 (2012). [DOI] [PubMed] [Google Scholar]
  28. Baskaran A. & Marchetti M. C. Nonequilibrium statistical mechanics of self-propelled hard rods. J. Stat. Mech 2010,, P04019 (2010). [Google Scholar]
  29. Peshkov A., Aranson I. S., Bertin E., Chaté H. & Ginelli F. Nonlinear field equations for aligning self-propelled rods. Phys. Rev. Lett. 109, 268701 (2012). [DOI] [PubMed] [Google Scholar]
  30. Bertin E. et al. Mesoscopic theory for fluctuating active nematics. New J. Phys. 15, 085032 (2013). [Google Scholar]
  31. Mishra S. & Ramaswamy S. Active nematics are intrinsically phase separated. Phys. Rev. Lett. 97, 090602 (2006). [DOI] [PubMed] [Google Scholar]
  32. Chate H., Ginelli F. & Montagne R. Simple model for active nematics: Quasi-long-range order and giant fluctuations. Phys. Rev. Lett. 96, 180602 (2006). [DOI] [PubMed] [Google Scholar]
  33. Giomi L., Mahadevan L., Chakraborty B. & Hagan M. F. Excitable patterns in active nematics. Phys. Rev. Lett. 106, 218101 (2011). [DOI] [PubMed] [Google Scholar]
  34. Lei X., Ackerson B. J. & Tong P. Settling statistics of hard sphere particles. Phys. Rev. Lett. 86, 3300–3303 (2001). [DOI] [PubMed] [Google Scholar]
  35. Henkes S., Fily Y. & Marchetti M. C. Active jamming: Self-propelled soft particles at high density. Phys. Rev. E 84, 040301(R) (2011). [DOI] [PubMed] [Google Scholar]
  36. Kudrolli A. Concentration dependent diffusion of self-propelled rods. Phys. Rev. Lett. 104, 088001 (2010). [DOI] [PubMed] [Google Scholar]
  37. Fielding S. M., Marenduzzo D. & Cates M. E. Nonlinear dynamics and rheology of active fluids: Simulations in two dimensions. Phys. Rev. E 83, 041910 (2011). [DOI] [PubMed] [Google Scholar]
  38. Giomi L., Mahadevan L., Chakraborty B. & Hagan M. F. Banding, excitability and chaos in active nematic suspensions. Nonlinearity 25, 2245–2269 (2012). [Google Scholar]
  39. Giomi L., Bowick M. J., Ma X. & Marchetti M. C. Defect annihilation and proliferation in active nematics. Phys. Rev. Lett. 110, 228101 (2013). [DOI] [PubMed] [Google Scholar]
  40. Thampi S. P., Golestanian R. & Yeomans J. M. Velocity correlations in an active nematic. Preprint at http://arxiv.org/abs/1302.6732 (2013). [DOI] [PubMed]
  41. Van Kampen N. G. Stochastic Processes in Physics and Chemistry Elsevier B. V. (2007). [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

Supplementary Figure, Discussion and References

Supplementary Figure 1, Supplementary Discussion and Supplementary References

ncomms4013-s1.pdf (254.8KB, pdf)
Supplementary Movie 1

Collision and annihilation of disclinations.

Download video file (2.3MB, mov)
Supplementary Movie 2

The recurrence of large-scale density inhomogeneity in active nematics.

Download video file (2.8MB, mov)

Articles from Nature Communications are provided here courtesy of Nature Publishing Group

RESOURCES