Background
Closed reduction of forearm and hand fractures can be performed with Chinese finger traps. 1 These are applied individually to the fingers and the limb is suspended, with gravity providing countertraction to disimpact the fracture by ligamentotaxis. The fracture fragments are manipulated once length is restored. Chinese finger traps are a valuable tool that can maintain traction while a cast is applied and can also be useful during fracture fixation. 2 They are not readily available in many hospitals, however, particularly out of hours.
Technique
Strips of Tensoplast® tape (2.5cm × 4.5m; BSN medical, Hull, UK) are placed over the thumb and each finger in turn. A strip is placed over the dorsal and palmar aspects of each digit, ensuring that the metacarpophalangeal joints are covered to prevent shearing and blister formation. Approximately 1 inch of Tensoplast® is left loose distal to the fingertip and pinched together (Fig 1). A silk suture is passed through each of these loose ends, the needle is removed and the resulting silk loops are tied to a drip stand.
Figure 1.
Modified finger traps
Discussion
This technique ensures that each digit is suspended individually in a similar manner to Chinese finger traps. Gravity can be used to facilitate ligamentotaxis and fracture reduction. It is our practice to place a padded arm board below the arm as a ‘safety net’ but we have not experienced a hand falling out of this arrangement. This technique is particularly useful if there is no assistant available.
References
- 1.Earnshaw SA, Aladin A, Surendran S, Moran CG. Closed reduction of Colles fractures: comparison of manual manipulation and finger-trap traction: a prospective, randomized study. J Bone Joint Surg Am 2002; 84: 354–358 [DOI] [PubMed] [Google Scholar]
- 2.Haddad FS, Goddard NJ. Acute percutaneous scaphoid fixation. A pilot study. J Bone Joint Surg Br 1998; 80: 95–99 [DOI] [PubMed] [Google Scholar]