Abstract
Subway systems span most large cities, and railway networks most countries in the world. These networks are fundamental in the development of countries and their cities, and it is therefore crucial to understand their formation and evolution. However, if the topological properties of these networks are fairly well understood, how they relate to population and socio-economical properties remains an open question. We propose here a general coarse-grained approach, based on a cost-benefit analysis that accounts for the scaling properties of the main quantities characterizing these systems (the number of stations, the total length, and the ridership) with the substrate's population, area and wealth. More precisely, we show that the length, number of stations and ridership of subways and rail networks can be estimated knowing the area, population and wealth of the underlying region. These predictions are in good agreement with data gathered for about 
subway systems and more than 
railway networks in the world. We also show that train networks and subway systems can be described within the same framework, but with a fundamental difference: while the interstation distance seems to be constant and determined by the typical walking distance for subways, the interstation distance for railways scales with the number of stations.
Introduction
Almost 
subway systems run through the largest agglomerations in the world and offer an efficient alternative to congested road networks in urban areas. Previous studies have explored the topological and geometrical static properties of these transit systems [1]–[5], as well as their evolution in time [6]–[8]. However, subways are not mere geometrical structures growing in empty space: they are usually embedded in large, highly congested urban areas and it seems plausible that some properties of these systems find their origin in the interaction with the city they are in. Previous studies [9], [10] have indeed shown that the growth and properties of transportation networks are tightly linked to the characteristics of urban environment. Levinson [9] for instance, showed that rail development in London followed a logic of both ‘induced supply’ and ‘induced demand’. In other words, while the development of rail systems within cities answers a need for transportation between different areas, this development also has an impact on the organisation of the city. Therefore, while the growth of transportation systems cannot be understood without considering the underlying city, the development of the city cannot be understood without considering the transportation networks that run through it. As a result, the subway system and the city can be thought as two systems exhibiting a symbiotic behaviour. Understanding this behaviour is crucial if we want to gain deeper insights into the growth of cities and how the mobility patterns organise themselves in urban environments.
At a different scale, railway networks answer a need for fast transportation between different urban centers, and we therefore expect their properties to be linked to the characteristics of the underlying country. A model of growth has been recently proposed [11], and relates the existence of a given line to the economical and geographical features of the environment. An interesting question is thus to know whether subways and railway networks behave in the same way, but at different scales. In other words, we are interested to know whether subways are merely scaled down railway networks, or whether they are fundamentally different objects, following different growth mechanisms. Also, the existence of scaling between the system's output and its size is important as it suggests that very general processes are governing the growth of these networks [12], [13].
Although many studies [3], [5], [14] explore the interplay between regional characteristics and the structure of transportation networks, a simple picture relating the network's most basic quantities and the region's properties is still lacking. In the spirit of what has recently been done for cities [13] and for railway networks [11], [15], we propose here a large-scale framework and try to understand how subways and railway networks scale with some of the substrates' most basic attributes: population, surface area and wealth. As a result, we are able to relate the total ridership, the number of stations, the length of the network to socio-economical features of the environment. We find that these relations are in good agreement with the data gathered for 
subway systems and 
railway networks accross the world. In particular, we show that even if the main mechanisms are the same, the fact that both systems operate at different scales is responsible for their different behaviors. We believe this should lay the foundations for more specific and involved discussions.
Results
Framework
A transportation network is at least characterized by its total number of nodes (which are here train or subway stations), its total length, and the total (yearly) ridership. On the other hand, a city (or a country in the railway case) is characterized by its area, its population and its Gross Domestic Product (GDP). Because transportation systems do not grow in empty space, but result from multiple interactions with the substrate, an important question is how network characteristics and socio-economical indicators relate to one another. Naturally, a cost-benefit analysis seems to be the appropriate theoretical framework. This approach has been developed in the context of the growth of railway networks [11], [15], and in these studies an iterative growth was considered: at each step an edge 
is built such that the cost function
 |
(1) |
is maximum. The quantity 
is the expected benefit and 
the expected cost of edge 
. In the following, we consider networks after they have been built, and we assume that they are in a ‘steady-state’ for which we can write a cost function of the form
 |
(2) |
where 
is the total expected benefits and 
the total expected costs, mainly due to maintenance (in the steady state regime). We further assume that, during this steady-state, operating costs are balanced by benefits. In other words
 |
(3) |
Indeed, because lines and stations cost money to be maintained, we expect the network to adapt to the way it is being used. Therefore we can reasonably expect that at first order the cost of operating the system is compensated by the benefits gained from its use. In the following we will apply this general framework to subway and railway networks in order to determine the behavior of various quantities with respect to population and GDP.
Subways
In the case of subways, the total benefits in the steady-state are simply connected to the total ridership 
and the ticket price 
over a given period of time. The costs, on the other hand, are due to the maintenance costs of the lines and stations, so that we can write (for a given period of time)
 |
(4) |
where 
is the total length of the network, 
the maintenance cost of a line per unit of length, 
the total number of stations and 
the maintenance cost of a station (for a given period time).
It is usually difficult to estimate the ridership of a system given its characteristics and those of the underlying city. Due to the importance of such estimates for planning purposes, the problem of estimating the number of boardings per station given the properties of the area surrounding the stations has been the subject of numerous studies [16], [17]. Here we are interested in the dependence of global, average behavior of the ridership on the network and the underlying city. Very generally, we write that the number 
of people using the station 
will be a function of the area 
serviced by this station–the ‘coverage’ [3]–and of the population density 
in the city
 |
(5) |
where 
is a random number of order one representing the fraction of people that are in the area serviced by the station and who use the subway. The main difficulty is in finding the expression of the coverage. It depends, a priori, on local particularities such as the accessibility of the station, and should thus vary from one station to another. We take here a simple approach and assume that on average
 |
(6) |
where 
is the typical size of the attraction basin of a given station. If we assume that it is constant, the total ridership can be written as
 |
(7) |
where 
is of the order of 1.
We gathered the relevant data for 
metro systems across the world (see Materials and Methods), which we cross-verified when possible with the data given by network operators. We plot the ridership 
as a function of 
on Fig. 1 (left) and observe that the data is consistent with a linear behavior. We measure a slope of 
which gives an estimate for 
 |
(8) |
Figure 1. (Subway) Relationship between ridership and coverage.
(Left) We plot the total yearly ridership 
as a function of 
. A linear fit on the 
data points gives 
(
) which leads to a typical effective length of attraction 
per station. (Right) Map of Paris (France) with each subway station represented by a red circle of radius 
.
We illustrate this result on Fig. 1 (right) by representing each subway stations of Paris with a circle of radius 
. So far, the distance 
appears here an intrinsic feature of user's behaviors: it is the maximal distance that an individual would walk to go to a subway station.
The average interstation distance 
is another distance characteristic of the subway system. Rigorously, this distance depends on the average degree 
of the network so that 
. It has however been found [7] that for the 
largest subway systems in the world, 
, so that we can reasonably take 
and thus
 |
(9) |
The interstation distance depends in general on many technological and economical parameters, but we expect that for a properly designed system it will match human constraints. Indeed, if 
, the network is not dense enough and in the opposite case 
, the system is not economically interesting. We can thus reasonably expect that the interstation distance fluctuates slightly around an average value given by twice the typical station attraction distance 
 |
(10) |
It follows from this assumption that the interstation distance is constant and independent from the population size. In order to test our assumption, we plot on Fig. 2 (left) the total length of subway networks as a function of the number of stations. The data agrees well with a linear fit 
. We also plot on Fig. 2 (right) the normalized histogram of the inter-station length, showing that the interstation distance is indeed narrowly distributed around an average value 
with a variance 
, consistently with the value found above for 
. The outliers are San Francisco, whose subway system is more of a suburban rail service and Dalian, a very large chinese city whose metro system is very young and still under development.
Figure 2. (Subway) Relation between the length and the number of stations.
(Left) Length of 
subway networks in the world as a function of the number of stations. A linear fit gives 
(Right) Empirical distribution of the inter-station length. The average interstation distance is found to be 
and the relative standard deviation is approximately 
.
As a result of the previous argument, we can express 
in terms of the systems characteristics. Indeed, the total ridership now reads
 |
(11) |
If we assume to be in the steady-state 
, using the results from Eqs. (4,11), we find that the total length of the network and the number of stations are linked at first order in 
by
 |
(12) |
and that the interstation distance reads
 |
(13) |
This relation implies that the interstation distance increases with the station maintenance cost, and decreases with increasing line maintenance costs, density and fare. We thus see that the adjustment of 
to match 
can be made through the fare price (or subsidies by the local authorities or national government). At this point, it would be interesting to get reliable data about the maintenance costs and fares for subway systems in order to pursue in this direction and to test the accuracy of this prediction.
So far, we have a relation between the total length and the number of stations, but we need another equation in order to compute their value. Intuitively, it is clear that the number of stations – or equivalently the total length – of a subway system is an increasing function of the wealth of the city. We assume a simple, linear relation of the form
 |
(14) |
where 
is the city's Gross Metropolitan Product (GMP), and 
the fraction of the city's wealth invested in public transportation. This relation can equivalently be interpreted as the proportional relation between the number of station per person and the city's development, as measured by its GMP per capita. On Fig. 3 (left) we plot the number of stations of different metro systems around the world as a function of the Gross Metropolitan Product of the corresponding city. A linear fit agrees relatively well with the data (
, dashed line), and gives 
. However, the dispersion around the linear average behaviour is important: more specific data is needed in order to investigate whether differences in the construction costs and investments (or the age of the system) can explain the dispersion, or if other important parameters need to be taken into account. Incidentally, another possibility would be to assume that the size of the system depends on the age of the system or the development of the city (measured by the GMP per capita). However, in both cases, we found poor correlations. At this stage, we thus conclude that the number of stations (respectively the density of stations) mostly depends on the total GMP (respectively the GMP per capita).
Figure 3. (Subway) Size of the subway system and city's wealth.
(Left) We plot the number of stations for the different subway systems in the dataset as a function of the Gross Metropolitan Product of the corresponding cities (obtained for 
subway systems). A linear fit (dashed line) gives 
(
). (Subway) Number of lines and number of stations (Right) We plot the number of metro lines 
as a function of the number of stations 
. A linear fit on the 
data points gives 
, or, in other words, metro lines comprise on average 
stations.
Finally, we consider the number of different lines with distinct tracks. A natural question is how the number of lines 
scales with the number stations 
, that is to say whether lines get proportionally smaller, larger or the same with the size of the whole system. We plot the number of lines as a number of stations on Fig. 3 (right) and find that the data agree with a linear relationship between both quantities (
). In other words, the number of stations per line is distributed around a typical value of 
, whatever the size of the system.
Railway networks
We first discuss an important difference between railway and subway networks. In the subway case, the interstation distance 
is such that it matches human constraints: 
where 
is the typical distance that one would walk to reach a subway station. For the railway network, the logic is however different: while subways are built to allow people to move within a dense urban environment, the purpose of building a railway is to connect different cities in a country. In addition, due to the long distance and hence high costs, it seems reasonable to assume that each city is connected to its closest neighbouring city. In this respect, the railway network appears as a planar graph connecting in an economical way, randomly distributed nodes (cities) in the plane. If we assume that a country has an area 
and 
train stations, the typical distance between nearest stations is
 |
(15) |
The total length 
is then given by
 |
(16) |
In order to test this relation for different countries, we plot the adimensional quantity 
as a function of the number of stations 
on Fig. 4. A power law fit gives an exponent 
, which is consistent with the previous argument.
Figure 4. (Train) Total length and number of stations.
Total length of the national railway network 
rescaled by the typical size of the country 
as a function of the number of stations 
. The dashed line shows the best power-law fit on the 
data points with an exponent 
.
At this point, we have a relation between 
and 
, but we need to find expressions for the other quantities. In contrast with subway systems, due to distances involved, the ticket price usually depends on the distance travelled and we denote by 
the ticket price per unit distance. The relevant quantity for benefits is therefore not the raw number of passengers – as in subways – but rather the total distance travelled on the network 
. Also, again due to the long distances spanned by the network, the costs of stations can be neglected as a first approximation, and we get for the budget the following expression
 |
(17) |
In the steady-state regime 
, or in other words the revenue generated by the network use must be of the order of the total maintenance costs [11], which leads to
 |
(18) |
In addition, if we assume that the order of magnitude of a trip is given by 
, the total travelled length is simply proportional to the ridership 
leading to
 |
(19) |
We thus plot the total daily ridership 
as a function of the total number of stations 
(figure 5), and despite the small number of available data points, a linear relationship between these both quantities seems to agree with empirical data on average (
). This result should be taken with caution, however, due to the important dispersion that is observed around the average behaviour, and the small number of observations.
Figure 5. (Train) Ridership and number of stations.
The total yearly ridership 
of the railway networks as a function of the number of stations. A linear fit on the 
data points gives 
(
)
According to the previous result, the total length and the number of stations are related to each other. We now would like to understand what property of the underlying country determines the total length of the network. That is to say, why networks are longer in some countries than in others. As in subway systems, economical reasons seem appealing. Indeed, the railway networks of some large african countries such as Nigeria are way smaller than that of countries such as France or the UK of similar surface areas. A priori, when estimating the cost of a railway network, one should take into account both the costs of building lines and the stations. However, as stated above, considering the distances involved, the cost of building a station is negligible compared to that of building the actual lines. We thus can reasonably expect to have
 |
(20) |
where 
is here the country's Gross Domestic Product (GDP) used as an indicator of the country's wealth, and 
the ratio of the GDP invested in railway transportation. We plot 
as a function of 
on Fig. 6 and the data agree well (
) with a linear dependence between 
and 
(note that we have more points here due to the fact that the data about the total length of a railway network is easier to get). Again, the dispersion indicates that the linear trend should only be understood as an average behaviour and that local particularities can have a strong impact on the important deviations observed. For instance, the United Arab Emirates are far from the average behaviour, with a 
network and a GDP of roughly 
million dollars. Yet, the construction of a 
railway network has been decided in 2010, which would bring the country closer to the average behaviour. As in the case of subways, we also tried to see whether 
could better be explained by the development of the country, as measured by its GDP per capita, but we didn't find any significant correlations.
Figure 6. (Train) Total length of the network and wealth.
Total length of the railway network 
as a function of the country GDP 
. The dashed line shows the linear fit on the 
data points which gives 
.
Discussion
We observed scaling relations for global properties of railways and subways and the existence of such relations suggests that basic, common mechanisms are at play during their evolution. A probable reason for the presence of these systems is the mobility demand and their structure is driven by economical mechanisms that seem to be the same for all countries, independently from any cultural, or historical considerations. The fact that macroscopic properties seem to be independent from specific details opens the possibility for simple modelling, and in this spirit, we have proposed a general framework to connect the properties of railway and subway systems (ridership, total length and number of stations) to the socio-economic and spatial characteristics (population, area, GDP) of the country or city where they are built. Despite their simplicity, our arguments agree satisfactorily with data we gathered for almost 
subway systems and 
railway networks accross the world. As a result, and maybe surprisingly, the knowledge of simple characteristics of a country or a city are enough to give an estimate of the size and use of its transportation system.
It should be noted that the noise associated with the data (and sometimes their definition, see Material and Methods) makes it difficult to infer behaviours from the empirical analysis alone. Therefore, the most appropriate way to proceed, we believe, is to make assumptions about the systems and build a model whose predictions can then be tested against data.
This study suggests that the fundamental difference between railways and subways comes from the determination of the interstation distance. While it is imposed by human constraints in the subway case, the railway network has to adapt to the spatial distribution of cities in a country. This remark is at the heart of the different behaviors observed for railways and subways (see Table 1 for a summary of these differences).
Table 1. Summary of the differences between subways and railways.
| Subway | Train | |
|
cste. |
|
|
|
|
|
|
|
We summarize the difference of behaviour between subways and railways. The scaling of the average interstation length 
of the network with the number of stations 
reveals the different logics behind the growth of these systems. Another difference lies in the total ridership 
: while it depends also on the population density 
for subways, it only depends on the number of stations 
for train networks. Finally, the size of both types of networks can be expressed as a function of the wealth of the region, represented here by the GDP 
. However, because the interstation length is constant for subways, the size can be expressed in terms of the number of stations 
or the length. In the railway networks case, the cost of stations is negligible compared to the building cost of lines, and the size is expressed in terms of the total length 
.
The previous arguments are able to explain the average behaviour of various quantities. Nevertheless, it would be interesting to identify deviations from these behaviours, and see as suggested in [3] whether they are correlated with topological properties of the system, or other properties of the network and the region. We think that the relations presented here provide however a simple framework within which local particularities can be discussed and understood. We also think that this framework could serve as a useful null-model to quantify the efficiency of individual transportation networks, and compare them to each other. This would however require more specific data than those that were available to us.
While we have focused on an average, static description of metro systems, we believe that our study provides a better understanding of how these systems interact with the region they serve. This new insight is a necessary step towards a model for the growth of subway systems that takes the characteristics of the city into account. Indeed, although models of network growth exist, the length of networks and nodes at a given time is usually imposed exogeneously, instead of being linked to the socio-economic properties of the substrate. This study provides a simple approach to these complex problems and could help in building more realistic models, with less exogeneous parameters.
It would also be interesting to gather data about the exact structure of all the networks, to study whether there is a relationship between their topology (degree distribution, detour index, etc.) and properties of the substrate, as was done for the road network in [5].
Finally, gathering historical data should allow to address the problem of the conditions for the appearance of a subway in a city. Indeed, we observe empirically that the GDP of the cities that have a subway system is always larger than about 
dollars, a fact that calls for a theoretical explanation.
Materials and Methods
Data for 
subways accross the world were mainly collected on Wikipedia [18], and cross-referenced with the operators' data when possible. The cities' GDP per capita was retrieved for 
cities from Brooking's Global MetroMonitor [19]. The choice of population and city area was more subtle. Indeed, most subway systems span an area greater than the city core, and the relevant area therefore lies somewhere between the city core's area and the total urbanized area. We chose to use the population and surface area data for urbanized areas provided by Demographia [20].
While data about ridership, network length were easily retrievable for more than 
countries from the UIC Railisa 2011 database [21], data about the number of stations were more difficult to find. We had to use various data sources, mainly scrapping the operators' ticket booking websites. Data about the GDP, population and surface areas of different countries were obtained from the World Bank [22], and the United Nations Statistics Division [23].
All the data used for this study are publicly available in tsv format at [24].
Acknowledgments
We thank Giulia Ajmone-Marsan and Rüdiger Ahrend for interesting discussions at an early stage of this project.
Data Availability
The authors confirm that all data underlying the findings are fully available without restriction. All data files available from the URL https://github.com/rlouf/data/tree/master/scaling_transportation
Funding Statement
The authors have no support or funding to report.
References
- 1. Benguigui L (1992) The fractal dimension of some railway networks. Journal de Physique I 2: 385–388. [Google Scholar]
- 2. Benguigui L (1995) A fractal analysis of the public transportation system of paris. Environment and Planning A 27: 1147–1161. [Google Scholar]
- 3. Derrible S, Kennedy C (2009) Network analysis of world subway systems using updated graph theory. Transportation Research Record: Journal of the Transportation Research Board 2112: 17–25. [Google Scholar]
- 4. Sienkiewicz J, Holyst JA (2005) Statistical analysis of 22 public transport networks in poland. Physical Review E 72: 046127. [DOI] [PubMed] [Google Scholar]
- 5. Levinson D (2012) Network structure and city size. PLoS ONE 7: e29721. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 6.Von Ferber C, Holovatch T, Holovatch Y, Palchykov V (2009) Modeling metropolis public transport. In: Traffic and Granular Flow, Springer. pp. 709719. [Google Scholar]
- 7. Roth C, Kang SM, Batty M, Barthelemy M (2012) A long-time limit for world subway networks. Journal of The Royal Society Interface 9: 25402550. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 8. Leng B, Zhao X, Xiong Z (2014) Evaluating the evolution of subway networks: Evidence from beijing subway network. EPL (Europhysics Letters) 105: 58004. [Google Scholar]
- 9. Levinson D (2008) Density and dispersion: the co-development of land use and rail in london. Journal of Economic Geography 8: 5577. [Google Scholar]
- 10. Xie F, Levinson D (2009) Topological evolution of surface transportation networks. Computers, Environment and Urban Systems 33: 211–223. [Google Scholar]
- 11. Louf R, Jensen P, Barthelemy M (2013) Emergence of hierarchy in cost-driven growth of spatial networks. Proceedings of the National Academy of Sciences 110: 8824–8829. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 13.Louf R, Barthelemy M (2014) How congestion shapes cities: from mobility patterns to scaling. Scientific Reports, in press. ArXiv:14018200. [DOI] [PMC free article] [PubMed]
- 14.Kansky KJ (1963) Structure of transportation networks: relationships between network geometry and regional characteristics. PhD Thesis.
- 15. Black WR (1971) An iterative model for generating transportation networks. Geographical Analysis 3: 283288. [Google Scholar]
- 16. Matsunaka R, Oba T, Nakagawa D, Nagao M, Nawrocki J (2013) International comparison of the relationship between urban structure and the service level of urban public transportation: A comprehensive analysis in local cities in japan, france and germany. Transport Policy 30: 26–39. [Google Scholar]
- 17. Kuby M, Barranda A, Upchurch C (2004) Factors influencing light-rail station boardings in the united states. Transportation Research Part A: Policy and Practice 38: 223–247. [Google Scholar]
- 18.Data about subway length, number of stations are available on the wikipedia website http://www.wikipedia.org.
- 19.GMP per capita data for different cities accross the world are available on Brookings Global Metromonitor website http://www.brookings.edu/research/interactives/global-metro-monitor-3.
- 20.Surface area and population data for urbanized areas accross the world are available on the Demographia website http://www.demographia.com.
- 21.The Railisa database is available on the UICs website http://www.uic.org/spip.php?article1353.
- 22.Data about the gdp of countries were taken from the World Banks website http://data.worldbank.org/indicator/NY.GDP.MKTP.CD.
- 23.Population and surface areas of countries were taken from the Demographic Yearbook, available on the United Nation Statistical Divisions website http://unstats.un.org/unsd/demographic/products/dyb/dyb2.htm.
- 24.All the data used for this study are available in tsv format at http://github.com/rlouf/data/tree/master/scaling_transportation.
Associated Data
This section collects any data citations, data availability statements, or supplementary materials included in this article.
Data Availability Statement
The authors confirm that all data underlying the findings are fully available without restriction. All data files available from the URL https://github.com/rlouf/data/tree/master/scaling_transportation