Abstract
In microbial ecosystems, bacteria are dependent on dynamic interspecific interactions related to carbon and energy flow. Substrates and end-metabolites are rapidly converted to other compounds, which protects the community from high concentrations of inhibitory molecules. In biotechnological applications, pure cultures are preferred because of the more straight-forward metabolic engineering and bioprocess control. However, the accumulation of unwanted side products can limit the cell growth and process efficiency. In this study, a rationally engineered coculture with a carbon channeling system was constructed using two well-characterized model strains Escherichia coli K12 and Acinetobacter baylyi ADP1. The directed carbon flow resulted in efficient acetate removal, and the coculture showed symbiotic nature in terms of substrate utilization and growth. Recombinant protein production was used as a proof-of-principle example to demonstrate the coculture utility and the effects on product formation. As a result, the biomass and recombinant protein titers of E. coli were enhanced in both minimal and rich medium simple batch cocultures. Finally, harnessing both the strains to the production resulted in enhanced recombinant protein titers. The study demonstrates the potential of rationally engineered cocultures for synthetic biology applications.
Introduction
In a microbial ecosystem, bacterial species cooperate by producing metabolites that serve as substrates for other species of a community. Dynamic and symbiotic interactions between different species enable an efficient carbon and energy flow. Furthermore, the interactions balance rapid environmental changes and high concentrations of substrates, intermediates, or other potentially harmful compounds. Common end-metabolites, such as organic acids, are rapidly converted to other compounds. Thus, tolerance to high concentrations of inhibitory compounds is not essential for individual members of a community. In biotechnological applications, however, engineered pure cultures are typically utilized as production platforms because of the easier bioprocess control and more straight-forward genetic engineering. Nevertheless, establishing a sustainable and economical bioprocess is a challenge, for which metabolic engineering and synthetic biology are seeking solutions [1]–[4]. For example, accumulation of unwanted side products and inefficient carbon and energy fluxes are common issues. Since Escherichia coli is a widely used host in bioprocesses, considerable effort is dedicated to controlling the overflow metabolism. In this phenomenon, carbon is excessively transported into the cells, and the capacity of tricarboxylic acid (TCA) cycle is exceeded. As a result, the metabolism is shifted to produce acetate from acetyl coenzyme A (CoA) [5]. The accumulation of acetate results in the induction of the stress response, growth inhibition, significant carbon loss, and eventually reduced productivity [6], [7].
Previous strategies to neglect the negative effects of acetate include both genetic engineering of E. coli to circumvent the acetate production and comprehensive optimization of fed-batch bioprocesses [8]–[10]. These approaches, however, potentially decrease the growth rate or require a substantial amount of optimization and engineering work. “Pure cocultures” typically consisting of two known strains are a more recent approach to improve the production platforms [11], [12], and a trend towards more controllable and tunable cocultures involving systems biology and synthetic biology solutions is growing stronger [13], [14]. For example, Eiteman et al. [15] have described the co-fermentation of hexoses and pentoses by a community of engineered E. coli. Tsai et al. [16] established a system for ethanol production from cellulose by a synthetic yeast community. Although the obtained ethanol yields are low, the study is an elegant example of the utilization of an engineered community for bioenergy production.
The culture systems described above are based on exploiting strains of single species, but they represent the first steps towards consolidated processing of sustainable substrate to products by an engineered consortium. Employing different strains of a single species broadens the engineering possibilities; however, the strains often possess very similar carbon utilization patterns, thus leaving unresolved the issues related to by-product accumulation and the inefficient carbon flow. On the other hand, genetic engineering is very challenging for mixed populations which efficiently degrade complex substrates and mixed sugars [17]. In the present study, the advantages of both mixed populations and readily engineered model strains are exploited; the well-characterized model organisms E. coli K12 and Acinetobacter baylyi ADP1 were employed for the construction of a synthetic and symbiotic microecosystem with directed carbon flow for improved culture performance. In the first stage of the study, the strains were cultured in a minimal medium batch cultivation to monitor the coculture compatibility, performance of individual strains, and carbon flow. Secondly, E. coli strain was engineered to produce recombinant protein, and batch cocultures with different substrate concentrations were conducted to demonstrate the effects of accelerated growth to recombinant protein production. Finally, both strains were engineered to produce the same recombinant protein, and cocultivations in a bioreactor were carried out.
Materials and Methods
Strains
In the initial coculture, E. coli K12 BW25113 (from Yale E. coli Genetic Stock Center CGSC, Connecticut, USA) was used. The single gene knock-out strain of A. baylyi ADP1 (DSM 24193) (gene deletion high-affinity gluconate permease, gntT, ACIAD0544) was employed in the study (kindly provided by Dr. Veronique de Berardinis, Genoscope, France). In the single gene knock-out mutant, the target gene is replaced with a gene cassette containing a kanamycin resistance gene (Kanr) [18]. The strain ADP1Δgnt::Kanr/tdk was transformed with a construct pVKK81-T-lux, and designated as ABlux. In the first stage of GFP production, E. coli K12 BW25113 was transformed with sfGFP/pAK400c and designated as ECsf. In the second stage, both E. coli K12 BW25113 and A. baylyi ADP1Δgnt::Kanr/tdk were transformed with a plasmid pBAV1C-T5-GFP, resulting in strains designated as ECg and ABg, respectively. For monitoring the individual GFP production of E. coli, a control strain ADP1Δgnt::Kanr/tdk transformed with a plasmid pBAV1C-ara without the insert was constructed, and the strain was designated as ABc. Genetic constructs are described in the section “plasmid construction and transformations”. The same strains without the plasmids were used as background control strains for fluorescence measurement.
Plasmid construction and transformations
For digestions and ligations, the enzymes and buffers were provided by Fermentas (Lithuania) and used according to the manufacturer's instructions. The PCR reagents were provided by Finnzymes (Finland) (DNA polymerase PhusionTM and buffer) and Fermentas (nucleotides). The primers were obtained from ThermoFisher Scientific (Germany) with appropriate restriction sites.
The superfolder GFP variant (from BBa_I746909) was amplified with primers 5′-GAGTTCTAGAGAAGGAGATATACATATGCGTAAAGGCGAAGAGCTGTTC-3′ and 5′-CTAGCAAGCTTAGTGGTGATGGTGATGATGTTTGTATAG-3′ with restriction sites XbaI and HindIII, respectively, and cloned to pAK400c vector [19], [20] under the IPTG-inducible lactose promoter, resulting in construct sfGFP/pAK400c. To construct the plasmid pBAV1C-T5-GFP with chloramphenicol resistance gene cat, the original plasmid pBAV1K-T5-GFP [21] was partially amplified with PCR using primers 5′-TAATAGCTAGCTATTTAAAGATACCCCAAGAAGCTAATTATAAC-3′ and 5′-TAATAGTGCACTCGCTTGGACTCCTGTTGATAG-3′. The product was ligated with cat gene amplified from pAK400c [19] using primers 5′-AATAGCTAGCCTGTAGAAAAGAGGAAGGAAATAATAAATGGAGAAAAAAATCACTGGATATAC-3′ and 5′-TAATAGTGCACTTACGCCCCGCCCTGCCAC-3′ with restriction sites NheI and ApaLI. For expression of bacterial luciferase operon, a plasmid pVKK81-T-lux (V. Santala and M. Karp, unpublished data) containing the bacterial luciferase genes luxCDABE from Photorhabdus luminescens and tetracycline resistance gene (T) was used. For ADP1, the plasmids pVKK81-T-lux, pBAV1C-T5-GFP, and pBAV1C-ara without an insert [22] were naturally transformed by the method described previously [23], and the colonies were selected from Luria-Agar (LA) plates (1 g/l NaCl, 5 g/l yeast extract, 10 g/l tryptone, 15 g/l agar) containing tetracycline (10 µg/ml) and chloramphenicol (25 µg/ml), respectively. For E. coli, the plasmids sfGFP/pAK400c and pBAV1C-T5-GFP were transformed by electroporation and the colonies were selected from LA plates containing chloramphenicol (25 µg/ml). The constructs were verified by restriction analysis, fluorescence, or luminescence determination.
Medium composition and cultivations
For the initial coculture, minimal salts medium MA/9 described previously (9) was used. Glucose (∼50 mM) was used as the initial carbon and energy source. The strains were cultivated in batch bottles (50 ml medium/250 ml Erlenmeyer flasks) at 37°C and 300 rpm both individually and in cocultures for 12 h. Two parallel bottles were used for each culture.
For study of the GFP production of E. coli both in monoculture and in coculture at variable substrate concentrations, the strains ECg and ABc were cultivated in 5 ml of a MA/9 medium supplemented with 50 mM, 100 mM, or 250 mM glucose and 100 µM IPTG at 30°C and 300 rpm. The cultivations were performed both individually and in cocultures in two parallel tubes for 24 h.
For 0.5-litre batch cultivations in a bioreactor, the monoculture (ECg) and the cocultures (ECg and ABg or ECg and ABc) were cultivated in a modified Luria-Bertani medium (1 g/l NaCl, 5 g/l yeast extract, 10 g/l tryptone) supplemented with 2 mM MgSO4, 0.5 mM CaCl2, 3 µM FeCl3 and 100 mM glucose, and 25 µg/ml chloramphenicol. The cultivation was carried out in a 1-litre vessel (Sartorius Biostat B plus Twin System, Germany) with an online pH monitoring system at 30°C for 10 h. The cultures were aerated by stirring (350 rpm) and supply of oxygen (O2 partial pressure set to 20%). Equal inoculum sizes for each strain were used. Control cultivations without glucose supplementation were conducted in 250 ml batch bottles in otherwise similar conditions.
Luminescence, fluorescence, and biomass determination
For luminescence measurements, samples were taken from the batch cultivations every hour and 200 µl of a sample (diluted when necessary) was applied on white microtiter well plates in three parallel samples. The luminescent signal was measured immediately with a Victor 2 plate reader (Perkin Elmer Life Sciences, Finland).
The total biomass in the bottles and in the bioreactor was determined by optical density measurement at the wavelength 600 nm every hour (OD600). Also, in the initial coculture and in the bioreactor experiments, the cells were plated every two hours (starting from 2 or 5 h) on LA plates with and without kanamycin (30 µg/ml) in order to determine the individual cell numbers of E. coli and A. baylyi according to CFU (colony forming units). For bioreactor batch cultures, 40 ml biomass samples were taken at the end of the cultivation, centrifuged at 30,000 g for 30 min and freeze-dried for gravimetric dry cell weight (CDW) determination.
For fluorescence determination, 1 ml samples were taken from all cultivations, centrifuged for 1 min at 10,000 g, and suspended in 1 ml 10 mM Tris-HCl buffer (pH 8.2) containing 150 mM NaCl. The samples for fluorescence measurements were diluted to linear range and measured as four 10–50 µl parallel samples with Fluoroskan Ascent FL (Thermo Labsystems, Finland) using the wavelengths 485 nm (excitation) and 538 nm (emission).
Analysis for glucose and end-metabolite concentrations
Glucose consumption and acetate accumulation/consumption in the cultivations were determined with high performance liquid chromatography (HPLC) as described previously [24]. Identification and quantification of glucose and end-metabolites were based on co-chromatography using external standards. The mediums were used as controls.
Results and Discussion
Establishing a synthetic coculture
In natural ecosystems, different species interact through diverse forms of cooperation, such as mutualism, parasitism, or symbiosis, creating a complex network of integrated metabolic pathways. From a synthetic biology point of view, cocultures can provide several advantages over monocultures by performing multi-step tasks and being more catabolically versatile [25]–[27].
In this study, a synthetic coculture was constructed using two strains of different species, E. coli K12 and A. baylyi ADP1, and the effects of connecting the carbon metabolism of these strains were investigated. For the construction of a functional, synthetic coculture, the bacterial species for the community were chosen based on characteristics supporting one another. To promote straight-forward system design and engineering, the availability of readily applicable engineering tools and well-characterized metabolic networks was considered essential here [28], [29]. In microbiological terms, the strains also share similar preferences for growth conditions.
A. baylyi ADP1 has been recently introduced as a competitive model organism for genetic studies [18] and metabolic engineering purposes [22], [23], and genetic tools are widely available for the strain [21], [30], [31]. A. baylyi ADP1 exhibits a relatively wide substrate range and is known to efficiently utilize organic acids such as acetate as a sole carbon and energy source [32], although the detailed mechanism for the uptake and utilization of acetate has not yet been characterized. Moreover, our recent studies suggest that ADP1 neither produces harmful overflow metabolites nor exhibits substrate inhibition (S. Santala and V. Santala, unpublished data).
In order to establish a functional symbiotic coculture system with directed carbon flow, and to produce unambiguous data for analyzing the coculture performance, a mutant strain of A. baylyi ADP1 made deficient of utilizing glucose was employed; according to the metabolic model of ADP1, the disruption of a high-affinity gluconate permease (gntT, ACIAD0544) blocks the glucose pathway. Due to the exceptional glucose utilization pathway of ADP1, a glucose molecule is oxidized to gluconate on the outer surface of the inner membrane by an electron carrier associated to glucose dehydrogenase, pyrroloquinoline quinine (PQQ). Subsequently, the high-affinity gluconate permease GntT transports gluconate into cells [32]. Here, a knock-out mutant strain A. baylyi ADP1ΔgntT::Kanr/tdk [18] was employed. When glucose is sufficiently available in the coculture, E. coli cells uptake glucose into the cells in excess and return a significant amount of the carbon into the medium in the form of acetate. Thus, in a coculture, the glucose negative mutant strain of ADP1 is dependent on the end-metabolites of E. coli, enabling an experimental validation of the carbon flow and fate. A schematic illustration of the proposed carbon flow is presented in Figure 1.
For a functional community, the compatibility of the two strains is evidently essential. In order to monitor the performance and growth of ADP1ΔgntT::Kanr/tdk in the coculture, pVKK81-T-lux containing a bacterial luciferase genes luxCDABE (from P. luminescens [33]) were transformed into the strain by natural transformation. A luminescent colony was selected from a plate containing 10 µg/ml tetracycline. The resulting strain ADP1ΔgntT::Kanr/tdk[lux_tetr] was designated as ABlux. In order to monitor the growth dynamics of E. coli and ABlux, the strains were cultivated both separately and in cocultures for 12 h in batch cultures. A minimal salts medium MA/9 supplemented with 50 mM glucose was used in the experiment. Biomass and luminescence were determined from the cultivations hourly. Selective plate count was also applied in order to determine the individual cell numbers of E. coli and ABlux. The total biomass of the coculture and the proportion of ABlux of the total biomass are presented in Figure 2. The use of luminescent construct enabled specific real-time monitoring of ABlux performance during the cocultivation (Figure 2, the inlet), and allowed the observation of potential fluctuations and problem situations in the cultures, not readily detectable by other means. According to the luminescence signal data, ABlux starts to grow in the coculture after a short lag phase, which was subsequently confirmed by the 5-hour timepoint plate count. After 11 h of cultivation, the strain reached an approximately 6% proportion of the total biomass.
The biomass of E. coli in the monoculture and in the coculture was calculated according to optical densities and plate counts: the data is presented in Figure 3A. In the E. coli monoculture, the growth shifted to an exponential phase after 5–6 hours of lag phase and reached a total cell number of ∼6.15·108 ml−1 after 12 h of cultivation. In the coculture, the lag phase for E. coli was shorter, 4–5 h, and the culture reached a slightly higher cell number of 6.63·108 ml−1 at 12 h timepoint.
The consumption of glucose and accumulation of end-metabolites in E. coli monoculture and coculture were analyzed by HPLC (Figure 3B). The consumption of glucose in E. coli monoculture was nearly linear after 7 h of cultivation, with a total decrease of 6 mM in the glucose concentration. Acetate could be reliably detected after an 8 h timepoint, the concentration reaching 4 mM at the end of the cultivation. End-metabolites other than acetate were not detected. In the coculture, the glucose was utilized more rapidly and efficiently, with the total decrease in glucose concentration being 9 mM. Detectable amounts of acetate could not be observed in the coculture until the 11 h timepoint, indicating efficient acetate utilization by ABlux. The acetate concentration in the end of the cultivation (2 mM) was lower compared to that of the monoculture of E. coli. The strain ABlux did not exhibit growth in the monoculture due to the lack of suitable carbon source, and neither consumption of glucose nor accumulation of end-metabolites was detected (data not shown).
We discovered that the coculture was beneficial for E. coli, as the cells grew faster in the cocultivation compared to the monoculture in the studied conditions. As expected, the proportion of ADP1 cells in the coculture increased as a result of E. coli acetate production. According to the E. coli growth curve, the consumption of acetate by ABlux positively affected the E. coli growth, which could be observed as a shorter lag phase and more sufficient growth. Even though the concentration of acetate did not reach the detection limit until the 8–10 h timepoint the cultures already showed differential performance after the 5 h timepoint, indicating that acetate already hinders growth at very low concentrations. Eventually, the coculture resulted in more efficient glucose utilization by E. coli and a lower overall acetate concentration in the culture. Thus, it could be concluded that the constructed carbon channeling system diminished the negative effects of acetate and favorably affected the E. coli growth, and a relatively low proportion of the supporting strain ABlux in the community was able to benefit the growth.
Production of recombinant protein by E. coli in the synthetic coculture
It was demonstrated that the coculture is beneficial for E. coli growth and biomass production. The next step was to study the effects of the coculture on production of the heterologous product that competes with the cell building blocks, demonstrated here by recombinant protein production. Green fluorescent protein (GFP) was chosen for the proof-of-principle production platform in order to enable real-time monitoring of production dynamics and comparability between the mono and cocultures. In addition, GFP has previously been successfully expressed both in E. coli and A. baylyi ADP1 [21]. A plasmid containing a superfolder variant of GFP (BBa_I746909) under inducible lactose promoter was constructed. The resulting plasmid sfGFP/pAK400c was transformed to E. coli, the clones were selected from chloramphenicol plates, and the strain was designated as ECsf. To enable A. baylyi ADP1 growth in the coculture, plasmid pBAV1C-ara (described elsewhere [22]) without an insert was transformed to the mutant strain ADP1ΔgntT::Kanr/tdk and selected from the chloramphenicol plates, resulting in a strain designated as ABc. The potential support of ABc for ECsf growth and protein production in a coculture was studied in minimal medium batch cultures supplied with different glucose concentrations: 50 mM, 100 mM, and 250 mM. The amount of GFP produced was estimated by fluorescence determination. The end-point biomasses (OD600) and fluorescence signals for monocultures and cocultures are presented in Figure 4. The cocultures grew to higher optical densities and produced more fluorescence with all studied glucose concentrations compared to the respective monocultures, and the highest optical density and fluorescence signal were obtained in the culture containing 50 mM glucose. Interestingly, the more glucose is present in the medium, the more significant is the difference between the mono- and cocultures. This indicates that high substrate concentrations may hinder E. coli growth by direct substrate inhibition and by accelerated overflow metabolism. In the cultures containing 250 mM glucose, a fluorescence signal of approximately 2-fold and an optical density of 3-fold higher were obtained for the coculture compared to the monoculture. Thus, the batch experiments further emphasized the coculture relevance for improved culture performance and productivity in variable substrate concentrations.
Production of recombinant protein by the synthetic coculture in a bioreactor
The previous experiments demonstrated that ABc efficiently supports ECsf growth in cocultures, being especially beneficial in cultures containing high substrate concentrations by neglecting the negative effects of acetate. In an ideal case, the secreted acetate could be directed to the product by the supportive strain. For such an approach to be practical, a single expression construct that is functional in both strains should be used. Indeed, an expression vector exploitable both in E. coli and A. baylyi ADP1 have been described [21]. Derived from the original vector, a plasmid pBAV1C-T5-GFP was constructed and transformed to E. coli and A. baylyi ADP1ΔgntT::Kanr/tdk. The vector contains the gene gfp under a constitutive strong promoter (T5), and a chloramphenicol resistance gene (cat). The resulting strains were designated as ECg and ABg, respectively.
To provide sufficient supply of nutrients and building blocks for the strains under strong over-expression, and to study the coculture functionality in simple unoptimized batch conditions without pH buffering or control, cultivations were performed in a rich medium supplied with glucose. The batch cultivations for the ECg and ABg coculture and ECg monoculture were carried out in a rich medium supplied with 100 mM glucose and aeration. The cultivations were conducted in a bioreactor in order to reveal more information about the culture characteristics and dynamics; oxygen partial pressure, pH, biomass production (OD), proportions of the coculture strains (%, CFU), substrate and end-metabolite concentrations, and fluorescence signals were monitored throughout the 10-hour cultivations (Figure 5). The coculture started to grow clearly faster after four hours of cultivation, reaching a final optical density of 13, which was ∼3-fold higher compared to the biomass of ECg monoculture (OD 4.3). The initial proportions of the two strains were equal but the proportion of ABg seemed to increase fastest between the 6–8 h timepoints, assumingly in parallel with the exponential growth phase of ECg. It was noted that when cultured in a rich medium, the proportion of ABg cells (20–30%) was much higher compared to the minimal medium coculture where the proportion of ABlux was approximately 6% by the end of the cultivation. The relatively high biomass of ABg did not, however, negatively affect ECg growth, which further supports the hypothesis of ADP1 not producing compounds inhibiting E. coli growth.
The fluorescence signals differentiated after 4 hours of cultivation, the final fluorescence signals being approximately 4-fold higher in the coculture compared to the ECg monoculture. The higher biomass and consequently the higher fluorescence signal of the coculture can be explained by the more propitious growth conditions; in both cultures, pH started to drop after 3–4 hours of cultivation, but the decline of pH in ECg monoculture was faster compared to the coculture. In the monoculture, the final pH of 5.4 was reached at 8–9 h timepoint. In the coculture, pH decreased more moderately, but increased rapidly after the 8 h timepoint, reaching a final pH of 6.5, which is very close to the initial pH of the culture. This implies an efficient internal buffering system in the coculture, which retains favorable growth conditions.
Acetate concentrations started to differentiate after the 6 h timepoint. At the end of the cultivation, the acetate concentration in the ECg monoculture was 13 mM, which probably affected the growth and cell performance negatively. In the coculture, the acetate concentration was only 3 mM, indicating successful recycle of acetate from the medium to the biomass and the product. The final glucose concentrations were 65 mM in the coculture and 90 mM in the monoculture. For the biomass samples collected at the end of the cultivations, the obtained CDWs were 2.1 g/l and 5.1 g/l for ECg and ECgABg cultures, respectively. Control cultivations without glucose supplementation were carried out in batch bottles. It was found that the coculture does not grow sufficiently in such conditions (data not shown), suggesting that the relevance of the coculture lies for the most part in the interactive glucose-acetate metabolism.
The previous minimal medium cultivations constituted of ECsf and ABc strains demonstrated that both biomass and product titers could be improved, even though ABc was not contributing to the protein production. In a minimal medium, ABc is completely dependent on the carbon provided by ECsf growth, and the proportion of ABc cells is low, whereas rich medium enables more rapid and independent growth of ABc (as for ABg), resulting in significantly higher cell proportions consuming valuable building blocks from protein production. Thus, we were interested to see how the increased number of ABc cells affects the protein production in a rich medium when only ECg contributes to protein production (Figure S1). In short, it was observed that the bioprocess trends, acetate production, glucose consumption, and biomass production were very similar compared to the ECgABg bioreactor coculture. According to the fluorescence signals, the recombinant protein titer was 50% higher in the ECgABc coculture compared to the ECg monoculture, which is expectedly less than improvements gained in ECgABg coculture. It can be concluded that as protein overexpression is highly dependent on the available biocomponents consumed by both the strains, it is not energetically affordable to maintain the system in a rich medium with high proportions of the supportive strain, without it participating in the production. Thus, the availability of genetic tools and the possibility to rationally engineer and commit both the strains to the production are crucial to take full advantage of the carbon redirection, as demonstrated here. Furthermore, the product example (recombinant protein) is constituted of amino acids instead of carbon based molecules, and thus the benefits of carbon rerouting could be potentially better exploited in production of hydrocarbons, such as fatty acid derived compounds for bioenergy [22], [23]. Our findings suggest it is possible to tune the coculture balance, nature, and dynamics by altering the medium, substrate concentration, and genetic constructs.
The accumulation of acetate is a widely recognized problem in bioprocessing of E. coli. This study demonstrates that by exploiting a coculture with optimally chosen strains, the growth, carbon utilization, and product formation can be improved through symbiotic interactions, and the negative effects of acetate can be diminished. Employing the coculture enabled the use of a high substrate concentration in a simple batch culture, and the over-flow metabolism of E. coli was successfully exploited in producing the protein of interest. Fluctuations in sugar concentrations in industrial feedstocks can impose restrictions for single strain cultures (6), whereas high substrate concentration is not an issue for the coculture system presented here. Thus, with regards to sustainable and economical carbon sources, exploiting a well-designed coculture may broaden the possibilities to exploit challenging liquors with high concentrations of carbohydrates.
Nevertheless, cocultures are complex systems involving numerous interactions. Despite the possibility to reduce these interactions, it is very difficult to identify all the mechanisms that are potentially beneficial for the culture. E. coli based bioprocesses have demanded decades of optimization work to build up a cost-effective bioproduction platform [34]. Thus, improvement of the utility, profitability, and viability of cocultures requires significant research efforts. It is impossible to exceed the production rates and yields of highly tuned and optimized systems at a single cell level, but the power of cocultures most probably lie in processes that cannot be readily optimized (e.g. processes exploiting diverse industrial streams) or in processes involving variable conditions.
Conclusions
Synthetic biology broadens the possibilities to tune sophisticated production platforms, and coculturing is seen as a promising new frontier for taking the bioproduction to the next level [35], [36]. This study demonstrates that rationally engineered synthetic cocultures can improve biomass production, culture viability, and product formation in simple unoptimized batch conditions. The study extends applications of novel type of bioprocess optimization, and provides clues for the development of functional, readily engineered, and dynamic cocultures for synthetic biology applications.
Supporting Information
Acknowledgments
We want to thank Dr. Anniina Kivistö and Rahul Mangayil for their assistance in HPLC analyses, as well as Antti Larjo for the computational metabolic analysis.
Data Availability
The authors confirm that all data underlying the findings are fully available without restriction. All relevant data are within the paper and its Supporting Information files.
Funding Statement
The project was funded by Academy of Finland (project ProChassis 272602, URL: http://www.aka.fi/fi/A/), and by Suomen Kulttuurirahasto (URL: http://www.skr.fi/) to MK. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
References
- 1. Keasling JD (2008) Synthetic biology for synthetic chemistry. ACS chemical biology 3:64–76. [DOI] [PubMed] [Google Scholar]
- 2. Lee SK, Chou H, Ham TS, Lee TS, Keasling JD (2008) Metabolic engineering of microorganisms for biofuels production: from bugs to synthetic biology to fuels. Curr Opin Biotechnol 19:556–563. [DOI] [PubMed] [Google Scholar]
- 3. Purnick PE, Weiss R (2009) The second wave of synthetic biology: from modules to systems. Nature reviews Molecular cell biology 10:410–422. [DOI] [PubMed] [Google Scholar]
- 4.Rabinovitch-Deere CA, Oliver JW, Rodriguez GM, Atsumi S (2013) Synthetic Biology and Metabolic Engineering Approaches To Produce Biofuels. Chemical reviews. [DOI] [PubMed]
- 5.Wolfe AJ (2005) The acetate switch. Microbiology and Molecular Biology Reviews 69:: 12–+. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 6. Luli GW, Strohl WR (1990) Comparison of growth, acetate production, and acetate inhibition of Escherichia coli strains in batch and fed-batch fermentations. Appl Environ Microbiol 56:1004–1011. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 7. Swartz JR (2001) Advances in Escherichia coli production of therapeutic proteins. Curr Opin Biotechnol 12:195–201. [DOI] [PubMed] [Google Scholar]
- 8. Eiteman MA, Altman E (2006) Overcoming acetate in Escherichia coli recombinant protein fermentations. Trends Biotechnol 24:530–536. [DOI] [PubMed] [Google Scholar]
- 9. De Mey M, De Maeseneire S, Soetaert W, Vandamme E (2007) Minimizing acetate formation in E. coli fermentations. J Ind Microbiol Biotechnol 34:689–700. [DOI] [PubMed] [Google Scholar]
- 10. Vemuri GN, Altman E, Sangurdekar DP, Khodursky AB, Eiteman MA (2006) Overflow metabolism in Escherichia coli during steady-state growth: transcriptional regulation and effect of the redox ratio. Appl Environ Microbiol 72:3653–3661. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 11. Li L, Ai H, Zhang S, Li S, Liang Z, et al. (2013) Enhanced butanol production by coculture of Clostridium beijerinckii and Clostridium tyrobutyricum . Bioresource Technology 143C:397–404. [DOI] [PubMed] [Google Scholar]
- 12.Seppälä J, Puhakka JA, Yli-Harja O, Karp MT, Santala V (2011) Fermentative hydrogen production by Clostridium butyricum and Escherichia coli in pure and cocultures. Int J Hydrogen Energ 10701–10708.
- 13. Bernstein HC, Paulson SD, Carlson RP (2011) Synthetic Escherichia coli consortia engineered for syntrophy demonstrate enhanced biomass productivity. Journal of Biotechnology 157:159–166. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 14. Hanly TJ, Henson MA (2011) Dynamic flux balance modeling of microbial co-cultures for efficient batch fermentation of glucose and xylose mixtures. Biotechnol Bioeng 108:376–385. [DOI] [PubMed] [Google Scholar]
- 15. Eiteman MA, Lee SA, Altman E (2008) A co-fermentation strategy to consume sugar mixtures effectively. J Biol Eng 2:3. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 16. Tsai SL, Goyal G, Chen W (2010) Surface display of a functional minicellulosome by intracellular complementation using a synthetic yeast consortium and its application to cellulose hydrolysis and ethanol production. Appl Environ Microbiol 76:7514–7520. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 17. Lynd LR, van Zyl WH, McBride JE, Laser M (2005) Consolidated bioprocessing of cellulosic biomass: an update. Curr Opin Biotechnol 16:577–583. [DOI] [PubMed] [Google Scholar]
- 18. de Berardinis V, Vallenet D, Castelli V, Besnard M, Pinet A, et al. (2008) A complete collection of single-gene deletion mutants of Acinetobacter baylyi ADP1. Mol Syst Biol 4:174. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 19. Santala V, Lamminmaki U (2004) Production of a biotinylated single-chain antibody fragment in the cytoplasm of Escherichia coli . J Immunol Methods 284:165–175. [DOI] [PubMed] [Google Scholar]
- 20. Abraham BG, Tkachenko NV, Santala V, Lemmetyinen H, Karp M (2011) Bidirectional fluorescence resonance energy transfer (FRET) in mutated and chemically modified yellow fluorescent protein (YFP). Bioconjugate chemistry 22:227–234. [DOI] [PubMed] [Google Scholar]
- 21. Bryksin AV, Matsumura I (2010) Rational design of a plasmid origin that replicates efficiently in both gram-positive and gram-negative bacteria. PloS one 5:e13244. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 22. Santala S, Efimova E, Koskinen P, Karp MT, Santala V (2014) Rewiring the wax ester production pathway of Acinetobacter baylyi ADP1. ACS Synthetic Biology 3:145–151. [DOI] [PubMed] [Google Scholar]
- 23. Santala S, Efimova E, Kivinen V, Larjo A, Aho T, et al. (2011) Improved Triacylglycerol Production in Acinetobacter baylyi ADP1 by Metabolic Engineering. Microbial Cell Factories 10:36. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 24. Santala S, Efimova E, Karp M, Santala V (2011) Real-Time monitoring of intracellular wax ester metabolism. Microbial Cell Factories 10:75. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 25. Bayer TS, Widmaier DM, Temme K, Mirsky EA, Santi DV, et al. (2009) Synthesis of methyl halides from biomass using engineered microbes. Journal of the American Chemical Society 131:6508–6515. [DOI] [PubMed] [Google Scholar]
- 26. Regot S, Macia J, Conde N, Furukawa K, Kjellen J, et al. (2011) Distributed biological computation with multicellular engineered networks. Nature 469:207–211. [DOI] [PubMed] [Google Scholar]
- 27. Hom EF, Murray AW (2014) Plant-fungal ecology. Niche engineering demonstrates a latent capacity for fungal-algal mutualism. Science 345:94–98. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 28. Durot M, Le Fevre F, de Berardinis V, Kreimeyer A, Vallenet D, et al. (2008) Iterative reconstruction of a global metabolic model of Acinetobacter baylyi ADP1 using high-throughput growth phenotype and gene essentiality data. BMC Syst Biol 2:85. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 29. Feist AM, Henry CS, Reed JL, Krummenacker M, Joyce AR, et al. (2007) A genome-scale metabolic reconstruction for Escherichia coli K-12 MG1655 that accounts for 1260 ORFs and thermodynamic information. Mol Syst Biol 3. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 30. Murin CD, Segal K, Bryksin A, Matsumura I (2012) Expression vectors for Acinetobacter baylyi ADP1. Appl Environ Microbiol 78:280–283. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 31.Santala S, Karp M, Santala V (2012) Monitoring Alkane Degradation by Single BioBrick Integration to an Optimal Cellular Framework. ACS Synthetic Biology 1. [DOI] [PubMed]
- 32. Young DM, Parke D, Ornston LN (2005) Opportunities for genetic investigation afforded by Acinetobacter baylyi, a nutritionally versatile bacterial species that is highly competent for natural transformation. Annu Rev Microbiol 59:519–551. [DOI] [PubMed] [Google Scholar]
- 33. Frackman S, Anhalt M, Nealson KH (1990) Cloning, organization, and expression of the bioluminescence genes of Xenorhabdus luminescens . J Bacteriol 172:5767–5773. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 34. Shiloach J, Fass R (2005) Growing E. coli to high cell density—a historical perspective on method development. Biotechnology Advances 23:345–357. [DOI] [PubMed] [Google Scholar]
- 35. Brenner K, You L, Arnold FH (2008) Engineering microbial consortia: a new frontier in synthetic biology. Trends Biotechnol 26:483–489. [DOI] [PubMed] [Google Scholar]
- 36.Goers L, Freemont P, Polizzi KM (2014) Co-culture systems and technologies: taking synthetic biology to the next level. Journal of the Royal Society, Interface/the Royal Society 11. [DOI] [PMC free article] [PubMed]
Associated Data
This section collects any data citations, data availability statements, or supplementary materials included in this article.
Supplementary Materials
Data Availability Statement
The authors confirm that all data underlying the findings are fully available without restriction. All relevant data are within the paper and its Supporting Information files.