Skip to main content
Wiley Open Access Collection logoLink to Wiley Open Access Collection
. 2014 Mar 6;70(12):1831–1839. doi: 10.1002/ps.3725

Molecular and phenotypic characterization of Als1 and Als2 mutations conferring tolerance to acetolactate synthase herbicides in soybean

Kay L Walter a, Stephen D Strachan b, Nancy M Ferry b, Henrik H Albert a, Linda A Castle a, Scott A Sebastian c,*
PMCID: PMC4282486  PMID: 24425499

Abstract

BACKGROUND

Sulfonylurea (SU) herbicides are effective because they inhibit acetolactate synthase (ALS), a key enzyme in branched-chain amino acid synthesis required for plant growth. A soybean line known as W4-4 was developed through rounds of seed mutagenesis and was demonstrated to have a high degree of ALS-based resistance to both post-emergence and pre-emergence applications of a variety of SU herbicides. This report describes the molecular and phenotypic characterization of the Als1 and Als2 mutations that confer herbicide resistance to SUs and other ALS inhibitors.

RESULTS

The mutations are shown to occur in two different ALS genes that reside on different chromosomes: Als1 (P178S) on chromosome 4 and Als2 (W560L) on chromosome 6 (P197S and W574L in Arabidopsis thaliana).

CONCLUSION

Although the Als1 and Als2 genes are unlinked, the combination of these two mutations is synergistic for improved tolerance of soybeans to ALS-inhibiting herbicides. © 2014 DuPont Pioneer. Pest Management Science published by JohnWiley & Sons Ltd on behalf of Society of Chemical Industry.

Keywords: acetolactate synthase, acetohydroxyacid synthase, sulfonylurea, herbicide resistance, herbicide tolerance, soybean, mutation

INTRODUCTION

The class of chemistry known as sulfonylurea (SU) herbicides was discovered by DuPont in 1975, and the first SU herbicide products were commercialized in 1982. SUs provided farmers with the first high-specificity herbicides that could be used at very low use rates. Thirty years after their introduction, SUs are still sold in over 80 countries for use on over 25 crops.

SUs are effective herbicides because they inhibit acetolactate synthase (ALS), also known as acetohydroxyacid synthase (AHAS), a key enzyme in branched-chain amino acid synthesis required for plant growth.1 As this enzyme is absent in animals, SUs have very low toxicity to non-target species. These qualities make SUs valuable tools for controlling weeds in a wide variety of applications. Some SUs are non-selective (effective on all plants) and can be used for complete vegetation control in industrial settings. Others are selective, i.e. they act on some plant species but are tolerated by others, based on the plant's differential ability to detoxify the SU before significant inhibition of ALS activity.

To date, two specific SUs (chlorimuron ethyl and thifensulfuron) are registered and used in a variety of herbicide formulations for selective weed control in soybean. Wild-type soybeans tolerate these SUs through metabolic inactivation.2,3 However, higher resistance to these and other SUs can also be conferred through specific mutations within ALS gene(s) that make the enzyme less susceptible to SU inhibition while retaining vital catalytic activity.4,5

In the mid-1980s, mutation-breeding techniques were used to develop a soybean line called ‘W20’ (derived from the cultivar Williams) with ALS-based resistance to SU herbicides.6,7 W20 is the original source line of the soybean trait known commercially as STS® (sulfonylurea-tolerant soybean). STS® offers more selectivity and flexibility with SUs specifically registered for soybean and may provide options for the use of more efficacious and/or broad-spectrum SUs for weed control.

Seed of W20 was released broadly to all major soybean-breeding companies in both North and South America in the late 1980s. Although breeding and commercial use of the STS® trait expanded quickly in the early 1990s, this expansion slowed in favor of transgenic glyphosate resistance (the Roundup Ready® or RR® trait) by the mid-1990s. This shift was driven mainly by the simplicity and convenience to the applicator to apply only one herbicide for broad-spectrum weed control, the improved control of weeds developing resistance to other herbicidal modes of action and the improved soybean crop tolerance to glyphosate relative to the combinations of several of the commercial herbicides labeled for use in soybean at that time. Although ‘stacked’ (RR® + STS®) varieties have been available since the mid-1990s, there is now renewed interest in trait stacks to provide more options for the control of glyphosate-resistant weeds.8,9

Inheritance studies6 confirmed that whole-plant SU resistance of W20 was conferred by a single semi-dominant mutation, which was later found to be a proline-to-serine substitution at position 178 in a soybean ALS gene (Falco SC, unpublished), equivalent to P197S in Arabidopsis thaliana, that cosegregated with in vitro resistance of the ALS enzyme to SU inhibition. With this evidence, the name ‘Als1’ was given to the new allele conferring SU resistance in W20. As Als1 provides a high level of SU resistance compared with the wild-type ‘als1’ allele, simple and reliable phenotypic screens can distinguish between plants that are wild type (als1/als1), heterozygous (Als1/als1) and homozygous (Als1/Als1) in segregating breeding populations. Therefore, there was initially less incentive to develop genetic markers for marker-assisted selection (MAS) of Als1.

Subsequent to the development of W20, lines homozygous for Als1 were subjected to a second round of mutagenesis in an attempt to derive mutations that confer even higher levels of SU resistance than that provided by Als1 alone. From the second round of mutagenesis, a line ‘W4-4’ was selected and proven to be more resistant to SUs than the original W20 line via both in vitro ALS enzyme and whole-plant assays.7

Segregation for SU resistance within populations derived from W4-4 × wild-type crosses indicated that W4-4 was homozygous for Als1 plus a second independently segregating mutation herein called ‘Als2’ (Sebastian SA, unpublished). Other studies demonstrated repeatedly that the combination of Als1 and Als2 provides higher crop safety for virtually every SU tested, including broad-spectrum SUs that could be registered for use in soybean lines containing both Als1 and Als2.

Given the increasing incidence of glyphosate-resistant weeds, there is renewed interest in both Als1 and Als2 to expand future weed control options in soybean. To this end, incorporation of both mutations into elite soybean germplasm via conventional breeding methods is under way. Breeding efforts to stack Als1 and Als2 along with other desirable traits (both native and transgenic) could be greatly facilitated by the development of codominant SNP (single nucleotide polymorphism) markers for MAS. This would eliminate the need for phenotypic screening protocols that can differentiate the numerous zygosity states possible in breeding populations. Knowing the exact zygotic condition of single plants would reduce the need for progeny testing to confirm that breeding lines are ‘fixed’ (homozygous and homogeneous) for both Als1 and Als2 alleles. Efforts to backcross both genes into the latest elite germplasm would also be simplified with MAS. Hence, the following studies were conducted to determine the DNA sequence of the Als1 and Als2 alleles so that broadly applicable SNP markers could be developed for MAS of these valuable alleles. As W4-4 was known to contain both Als1 and Als2 mutations, based on its breeding history and SU-resistant phenotype, sequencing of these alleles was accomplished by comparing the sequence of ALS genes in W4-4 with the sequence of ALS genes in wild-type soybean lines.

MATERIALS AND METHODS

Sequencing studies

Genomic DNA extraction

Genomic DNA from W4-4 seeds was extracted at room temperature. Root sections, approximately 0.5 cm long, were removed from two germinated seeds on the fourth day and added to a 2 mL microfuge tube along with two stainless steel 5/32″ balls. The tubes were placed in a GenoGrinder 2000 to grind the tissue with settings 1 × 250 strokes min−1 for 1 min and 30 s. The tube was then microcentrifuged at 13 000 × g for 1 min. The root samples were ground and microcentrifuged a second time at the same settings, and genomic DNA was then isolated from the supernatant using the Qiagen DNeasy Plant Mini kit (Cat. No. 69104) as per the manufacturer's protocol.

Molecular cloning of the genomic DNA for the catalytic subunit of the ALS gene family

The cDNA sequence for the Als1 catalytic subunit was used to search a proprietary soy sequence database with the blastn program.10 Nine sequences described as acetolactate synthase were identified and mapped to the JGI/DOE soy genomic sequence assembly Glyma111 for wild-type genotype Williams 82. These nine sequences corresponded to five loci annotated as ALS genes listed in Table1. The gene on chromosome 1 with introns excised has an open reading frame length of 278 amino acids, which is less than half the size of the next smallest ALS gene on chromosome 4, which has 641 residues. It was unclear whether the chromosome 1 gene was a functional ALS gene or a pseudogene. Nevertheless, this gene was included in the sequencing analysis. PCR primers were designed to flank the genes predicted by the Fgenesh algorithm at these loci (Table2). Using W4-4 genomic DNA as the template, PCR products for the ALS genes were cloned using Finnzymes Phusion DNA polymerase (Cat. No. F-530S), following the instructions for recommended temperatures and cycles in the Phusion protocol. The PCR products were cloned into the vector pCR-BluntII-TOPO and transformed into TOP10 cells (Invitrogen Cat. No. K2800-20). Sequencing was done by Sequetech (Mountain View, CA). Sequences were aligned with Sequencher 4.8 software.

Table 1.

Gene names for ALS catalytic subunit genes from the soybean genome

Gene name Fgenesh Complete ORF length (AA) Wild-type allele name
Glyma01g09920.1 GM01_5367 278
Glyma04g37270.1 GM04_21145 641 als1
Glyma06g17790.1 GM06_4197 645 als2
Glyma13g31470.1 GM13_13846 645
Glyma15g07860.1 GM15_1662 653
Table 2.

Oligonucleotide primers used for cloning of ALS genes from W4-4 soybean genomic DNA

Primer name Primer sequence (5′ to 3′)
GM01F GAAACTCTCCACCGCCTC
GM01R GATCACTAAGTAACCATTAAAGAC
GM04F TTAATAAATTTTCTACATCCCAGTGA
GM04R GATGCTACTGCATGTAGTAAG
GM06F GACACACTCTGAGAGTCTC
GM06R TACCAAAACTACTGCAAACTATG
GM13F ACCTAAGTTAATTCATGAAATGTTTG
GM13R GCTATATTAGCTTACTATTTTTACAAAAC
GM15F GATCATTAAACGTTTTAACGCG
GM15R TATCTTAGTTGCCAACATGAATAC

Cloning of Als1 and Als2 cDNAs from W44

Two 6 mm leaf punches per tube were taken from the first trifoliate leaves of four-week-old W4-4 plants and stored at −80 °C. Total RNA from the plant tissue was purified using the Qiagen RNeasy Mini Plant kit (Cat. No. 74904), with the frozen tissue ground in a GenoGrinder 2000 set to 1 × 250 strokes min−1 for 1 min after the addition of two steel 3/32″ balls and kit lysis buffer containing beta mercaptoethanol in each tube. Synthesis of cDNA was done with Invitrogen's 3′ RACE kit (Cat. No. 18373019) using 1 µg of total RNA as template following the manufacturer's protocol. A no-reverse-transcriptase control was also included. Finnzymes Phusion DNA polymerase (Cat. No. F-530S) was used for PCR, with the cDNA as starting template, following the instructions for recommended temperatures and cycles in the Phusion protocol. Forward primers were designed in the 5′ untranslated regions for the two genes that were found to contain mutations located on chromosomes 4 and 6. Reverse primers were located in the gene near the stop codon and in the terminator region. The PCR primers are listed in Table3.

Table 3.

Oligonucleotide primers used for cloning of Als1 and Als2 genes from W4-4 soybean cDNA

Primer name Primer sequence (5′ to 3′)
ALS1F TGGTGCTACCCACACAACAC
ALS2F CAGTGCAGCCACACAAAGAC
ALS3′UTRR CTCACCACAGGCCAAATC
ALSR CATCCTTGAAGGATCCATTACTGGGAATCA

Reverse transcription quantitative PCR

To confirm the Als1 and Als2 expression results from cDNA cloning, reverse transcription quantitative PCR (RT-qPCR) was performed. Approximately 6 µg of total RNA that was isolated as explained in the previous section was DNase treated with the Qiagen RNase-Free DNase set (Cat. No. 79254) by following the manufacturer's RNA Cleanup protocol with DNase on-column digestion in the Qiagen RNeasy Mini kit (Cat. No. 74104). Synthesis of cDNA was performed using Invitrogen's 3′ RACE kit (Cat. No. 18373019) with 870 ng of total RNA as template. A no-reverse-transcriptase control was also included. The cDNA and the no-reverse-transcriptase control were both diluted with 60 µL of Tris-EDTA (pH 8.0) buffer. Forward and reverse primers were used to amplify regions of approximately 200 bp length for Als1 and Als2. Primers to amplify a region in the Glycine max eukaryotic initiation factor 4A-15-like (eIF-4A) gene (RefSeq accession NM_001255135.2) were used as a control. All primer sequences used for RT-qPCR are listed in Table4. PerfeCTa SYBR Green Supermix UNG (Quanta Biosciences Cat. No. 95068–500) was used for each reaction, which was scaled down to 25 µL from the manufacturer's original 50 µL protocol, as well as 2 µL of diluted cDNA (or no-RT control) and 1.25 µL of each 10 µM primer. Each template/primer pair reaction was done in triplicate. Amplification was performed with a Bio-Rad Chromo4 real-time detector with a DNA engine thermal cycler. Initial incubation was at 50 °C for 2 min, followed by denaturation at 95 °C for 2 min. Forty PCR cycles were performed: denaturation at 95 °C for 15 s, annealing at 58 °C for 10 s and elongation at 72 °C for 15 s. This was followed by a melting curve program reading every 0.2 °C from 65 to 85 °C. Opticon Monitor 3.1.32 software was used to analyze the results.

Table 4.

Oligonucleotide primers used for reverse transcription quantitative PCR (RT-qPCR)

Primer name Primer sequence (5′ to 3′)
ALS1QF CTTCACCAAGGAAGCGC
ALS1QR TTCGGCGGCGAAGAC
ALS2QF CGCCGGCAACATCAG
ALS2QR TCGGCGGCGAAGATG
EIF4AQF ATGCTGCGCAGACAGTCACT
EIF4AQR CAGCCTCATCCAATACAAACATCT

Phenotypic analyses

Evaluation of herbicide tolerance

Soybean isolines having wild-type als1 and als2 genes, the Als1 mutation, the Als2 mutation and both the Als1 and Als2 mutations were evaluated for their responses to eleven herbicides representing the five chemical families that inhibit the ALS enzyme. The five chemical families represented were: (1) the imidazolinones; (2) the pyrimidinylthiobenzoates; (3) the sulfo-nylaminocarbonyltriazolinones (also known as the triazolinones); (4) the sulfonylureas; (5) the triazolopyrimidines. Soybean seeds from each line were planted into 10 cm pots filled with Redi-Earth potting mix (Sun Gro Horticulture Canada Ltd, Alberta), and the resulting plants were grown in a greenhouse environment supplemented with lighting (16 h photoperiod) for the duration of the test. Herbicide active ingredients were applied as formulated materials in water containing 0.25% (v/v) non-ionic surfactant post-emergence to soybeans at the V2 growth stage.12 Herbicides were applied as post-emergence broadcast treatments in a spray volume of 280 L ha−1. Application rates tested were 0.5×, 1×, 2×, 4× and 8× the label rate for each active ingredient. Label rates (g AI = active ingredient ha−1) for each active ingredient were: imazapyr 17.5; imazethapyr 70; pyrithiobac sodium 70; chlorimuron 17.5; nicosulfuron 35; rimsulfuron 17.5; sulfometuron 8.75; thifensulfuron 8.75; tribenuron 8.75; flucarbazone 35; cloransulam methyl 17.5.

Phenotypic plant response was visually evaluated and recorded 14 days after herbicide application. Response scores were based on a 0–100 scale, where zero is no visual response and 100 is plant death. Controls consisted of soybean plants of the same variety that received no herbicide treatments for each of the varieties tested. There were two replications of each soybean line for each herbicide treatment.

Log-logistic dose–response curves were fitted to percentage phenotypic responses using log10 of dose.13 Curves were fitted using the logit link with normal errors. Inverse prediction was used to calculate the dose of herbicide estimated to elicit 50% (EC50) or 10% (EC10) response. The 95% confidence intervals for ECx values were calculated using Fieller's theorem.14 These ECx values and their confidence intervals were inputs to test for the interaction between the Als1 and Als2 genes using the isobole method of analysis. If phenotypic plant response to the highest dose of the herbicide was at least 80% for the Als1, Als2 and Als1 + Als2 biotypes, EC50 values were used to test for synergistic interactions between the Als1 and Als2 genes for improved tolerance to the herbicide. If phenotypic plant response to the highest dose of the herbicide was 20% or less for any one of the three biotypes, EC10 values were used to test for synergism.

Isobole method of analysis

Isoboles are a commonly used approach for assessing possible interaction. The historic basis for predicting the effect of a combination is based on the concept of dose equivalence, i.e. an equally effective dose (a) of one will add to the dose (b) of the other in a combination situation.15 Isobole analysis reduces phenotypic plant response plotted in three-dimensional space (X = contribution of Als1 gene, Y = contribution of Als2 gene, Z = plant response to the herbicide) to a two-dimensional plot by selecting a quantitatively defined effect as criterion for a graphic representation of the joint action of the two components (e.g. X = dose of herbicide estimated to produce 50% phytotoxicity when the Als1 gene is present and Y = dose of herbicide estimated to produce 50% phytotoxicity when the Als2 gene is present).16,17 In his research paper, Tammes18 quotes Loewe and Muischnek's studies19 on the joint action of drugs, naming such a line an ‘isobole’, a line of equal effect (zero interaction). The isobole method is generally valid, regardless of mechanisms of action.20

RESULTS

Sequencing results/alignments

Sequencing results for the five ALS genes showed a mutation for two out of the five genes in Table1, Glyma04g37270.1 and Glyma06g17790.1. The mutant allele in Glyma04g37270.1 is Als1 and the mutant allele in Glyma06g17790.1 is proposed as Als2. Alignments of the full-length wild-type als1 and als2 alleles with their Als1 and Als2 counterparts were made with the AlignX feature in Vector NTI software (Invitrogen). Results are shown in Figs. 1 and 2. W4-4's Als1 allele resulted in a proline-to-serine substitution at position 178 of the full-length soybean protein (P197S in A. thaliana), which confirms the mutation previously found in W20 (Falco SC, unpublished). W4-4's Als2 allele resulted in a tryptophan-to-leucine substitution at position 560 of the full-length soybean protein (W574L in A. thaliana). These mutations are similar to the mutations in the highly herbicide-resistant ALS variant known as HRA,2123 which, in soybean, has mutations P178A and W555L in the same ALS gene (P197A and W574L in A. thaliana). Amino acid position 555 in Als1 is analogous to amino acid 560 in Als2.

Figure 1.

Figure 1

Alignment of wild-type als1 with W4-4 Als1 with mutation P178S.

Figure 2.

Figure 2

Alignment of wild-type als2 with W4-4 Als2 with mutation W560L.

Expression of Als1 and Als2 mutations

Results of the cDNA cloning of the Als1 and Als2 mutations are shown in the 1% Tris-borate-EDTA (TBE) agarose gel in Fig.3 [30 min at 100 V, 1 kb ladder (NEB Cat. No. N0468S)]. The amplified cDNA fragments appear to match the expected fragment sizes of 2066 bp and 1942 bp for Als1 (see Fig.3, lanes marked ‘a’ and ‘b’ respectively) and 2083 bp and 1957 bp for Als2 (see Fig.3, lanes marked ‘c’ and ‘d’ respectively). The faint bands in the no-RT control lanes can be attributed to slight genomic contamination, as the original RNA isolation preparation was not DNase treated. The remaining RNA prep was subsequently DNase treated before cDNA synthesis and RT-qPCR. The RT-qPCR results are shown in quantification cycle (Cq) plots in Fig.4, where Cq is the terminology adopted in the MIQE guidelines.24 Lower Cq values indicate higher levels of the specific mRNA being analyzed. The Cq values are also listed in Table5. The Cq values for Als1 and Als2 were higher than the Cq value for the eIF-4A control in the W4-4 sample. This suggests that the expression of Als1 and Als2 was relatively low compared with eIF-4A. The no-RT control did not register Cq values for Als1 and Als2. Although the eIF-4A/no-RT combination had an average Cq value of 34.93, this value is significantly higher than the average Cq value of 21.41 for eIF-4A in the W4-4 sample, and the genomic contamination can be regarded as insignificant. The ratio of Als2 to Als1 is calculated using the formula25

graphic file with name ps0070-1831-m1.jpg

Figure 3.

Figure 3

Als1 and Als2 alleles were amplified from W4-4 cDNA with primers from Table3: a – ALS1F and ALS3′UTRR; b – ALS1F and ALSR; c – ALS2F and ALS3'UTRR; d – ALS2F and ALSR. Faint bands in no-RT control lanes are slight genomic contamination in the RNA preparation used for cDNA synthesis.

Figure 4.

Figure 4

Reverse transcriptase quantitative PCR results for Als1, Als2 and eIF-4A genes: (a) with W4-4 cDNA only; (b) with no-RT control only (all done in triplicate).

Table 5.

Cq values for RT-qPCR results

Sample Gene Efficiency Cq Average Cq Maximum Cq Minimum Cq Cq SD
W4-4 cDNA Als1 1.62 37.56 37.64 38.23 37.21 0.43
W4-4 cDNA Als2 1.68 37.04 37.14 37.7 36.18 0.68
W4-4 cDNA eIF-4a 1.78 21.39 21.41 21.52 21.21 0.14
No-RT control Als1 N/A N/A N/A N/A N/A N/A
No-RT control Als2 N/A N/A N/A N/A N/A N/A
No-RT control eIF-4a 1.67 34.89 34.93 35.56 34.52 0.45

where the average of the efficiencies for Als1 and Als2 was used, as well as the averages of the Cq values. This resulted in a ratio of 1.30, which suggests that the level of expression of Als1 and Als2 is essentially the same.

Together, the cDNA cloning and the RT-qPCR results confirm the expression of both of the Als1 (P178S) and Als2 (W560L) genes, suggesting that the mutations in both of these genes contribute to the high levels of sulfonylurea tolerance in the W4-4 soy line.

Evaluation of herbicide tolerance

Als1, Als2 and the Als1 + Als2 combination dramatically reduced soybean response to post-emergence applications of herbicides inhibiting the acetolactate synthase enzyme (Fig.5). Based on visual analysis of dose–response curves, when compared with the wild type, Als1 significantly improved soybean tolerance to chlorimuron, nicosulfuron, rimsulfuron, sulfometuron, thifensulfuron, tribenuron and flucarbazone. When compared with the wild type, Als2 improved soybean tolerance to imazapyr, chlorimuron, nicosulfuron, rimsulfuron, sulfometuron, thifensulfuron, tribenuron and flucarbazone. When compared with the wild type, inclusion of the combination of Als1 + Als2 improved soybean tolerance to imazapyr, pyrithiobac sodium, chlorimuron, nicosulfuron, rimsulfuron, sulfometuron, thifensulfuron, tribenuron and flucarbazone. When compared with soybean containing Als1 only or Als2 only, inclusion of the combination of Als1 + Als2 improved soybean tolerance to imazapyr, pyrithiobac sodium, nicosulfuron, rimsulfuron, sulfometuron and flucarbazone. These test results confirm that the inclusion of Als1, Als2 and the combination of Als1 + Als2 improve the tolerance of soybean to at least four of the five chemical families active on ALS. Wild-type soybean showed little phytotoxic response to imazethapyr or cloransulam methyl. Both of these herbicides are inherently selective for soybean tolerance and are labeled for weed control in soybean. Test results for imazethapyr and cloransulam methyl show that Als1, Als2 and the combination of Als1 + Als2 do not increase the sensitivity of soybean to either herbicide.

Figure 5.

Figure 5

Soybean response to post-emergence applications of ALS herbicides.

Data presented in Fig.5 were used to estimate doses of herbicides that elicit either 10% or 50% phytotoxicity response of ‘wild-type’ soybean and soybean containing the Als1, Als2 or Als1 + Als2 genes. These EC10 and EC50 values, and their confidence intervals, were subsequently used for isobole analysis to test for zero interaction, antagonism or synergism among the various ALS genotypes. For example, in Fig.6, the predicted dose–response curves based on log-logistic analysis are compared with the observed data for pyrithiobac sodium for the three soybean biotypes. Amounts of pyrithiobac sodium to cause 50% phytotoxicity were estimated to be 74 (62–89) g AI ha−1, 49 (46–53) g AI ha−1 and 450 (330 to >560) g AI ha−1 [mean (95% confidence interval)] for soybean containing Als1 only, Als2 only or Als1 + Als2 genes respectively. These EC50 values were then compared to test for interactions between the Als1 and Als2 genes.

Figure 6.

Figure 6

Soybean response to post-emergence applications of pyrithiobac sodium: (a) Als1 only; (b) Als2 only; (c) Als1 + Als2; (d) isobole plot based on EC50 for Als1 + Als2, illustrating synergism versus the zero interaction line.

The isobole method of analysis for gene interaction is based on the dose response of biologically active agents in combination and uses ‘isoeffective’ or equally effective doses for each of the components to build an isobole graph. In this study, the agents being evaluated were the Als1 and Als2 gene mutations. Soybean responses to increasing doses of herbicides were used to assess the effectiveness of each gene to improve tolerance to ALS-inhibiting herbicides. If there is no interaction between the genes, an isoeffective amount of one gene can be substituted for the other gene. The zero interaction line in the isobole is a straight line connecting isoeffective rates (e.g. EC50) for each of the two genes (Fig.6d). An EC50 line with confidence intervals was estimated for the observed response of soybean containing the combination of Als1 + Als2. These values were then plotted on the isobole graph by parsing out the contribution to the (Als1 + Als2) combination's EC50 from its Als1 and Als2 components using a 1:1 ratio assumption. A 1:1 ratio is assumed because Als1 + Als2 consists of a single mutation of Als1 on one ALS gene and a single mutation of Als2 on an independent ALS gene. If the zero interaction line is below the lower confidence interval for the combination, synergy is indicated. In addition, if the combination of the Als1 and Als2 genes is synergistic in their ability to improve soybean tolerance to ALS herbicides, substantially more herbicide is required to produce the same level of phytotoxic response in soybean containing both ALS genes than in soybean containing only one of the ALS genes. For example, substantially more pyrithiobac sodium (450 g AI ha−1) was required to cause 50% phytotoxicity in the Als1 + Als2 biotype versus the amount of pyrithiobac sodium necessary to cause a 50% phytotoxic response in either the Als1 only (74 g AI ha−1) or the Als2 only (49 g AI ha−1) biotypes (Fig.6). Synergistic activity of the combination of Als1 plus Als2 genes to improve soybean tolerance to ALS herbicides was observed for imazapyr, pyrithiobac sodium, rimsulfuron, sulfometuron, tribenuron and flucarbazone (Table6). These active ingredients represent four of the five chemical families with herbicidal activity on the acetolactate synthase enzyme, suggesting that the combination of Als1 + Als2 provides improved tolerance of soybean to all chemistries with activity on this site of action. Isobole analysis was not conducted for imazethapyr, chlorimuron, thifensulfuron or cloransulam methyl because insufficient herbicide was applied to produce substantial phytotoxicity in soybean containing either the Als1 or the Als2 gene and in soybean containing both genes. Wild-type soybean can tolerate these specific herbicides through independent (non-ALS-based) metabolic mechanisms. Although there was insufficient soybean response to test for synergism for imazethapyr, chlorimuron, thifensulfuron or cloransulam methyl, data from Fig.5 show that inclusion of the Als1, Als2 and Als1 + Als2 mutations at least maintains and can dramatically improve soybean tolerance to these herbicides.

Table 6.

Dose response and isobole analysis data of soybeans treated with ALS herbicides

Chemical family Active ingredient EC isobole Biotypea Geneinteraction
Wild type (als1 + als2) Als1 only Als2 only Als1 + Als2
(g AI ha−1) (g AI ha−1) (g AI ha−1) (g AI ha−1)
Imidazolinone Imazapyr EC50 22 (20–23) 39 (34–44) 94 (71–140) 110 (87 to >140)b Synergistic
Pyrimidinylthiobenzoate Pyrithiobac sodium EC50 <35c 74 (62–89) 49 (46–53) 450 (330 to >560) Synergistic
Sulfonylurea Nicosulfuron EC10 38 (26–49) 190 (90–220) 110 (60–140) >280 Zero interaction
Sulfonylurea Rimsulfuron EC10 10 (8–12) 29 (18–37) 24 (18–29) 120 (80 to >140) Synergistic
Sulfonylurea Sulfometuron EC10 <4.4 15 (9–19) <4.4 >70 (17 to >70) Synergistic
Sulfonylurea Tribenuron EC10 4 (<4–5) 70 (70) 5 (<4–8) >70 Synergistic
Triazolinone Flucarbazone EC10 <17.5 230 (120 to >280) <17.5 >280 Synergistic
a

Values are means (95% confidence intervals).

b

Values with > are higher than the highest dose of herbicide tested.

c

Values with < are lower than the lowest dose of herbicide tested.

ALS genes in other crops, including maize (Zea mays L.), wheat (Triticum aestivum L.), oilseed rape (Brassica napus L.), rice (Oryza sativa L.) and sunflower (Helianthus annuus L.), have been modified to improve the tolerance of these crops primarily to the imidazolinone herbicides, one of the five chemical families with activity on ALS.26 Tolerance to imidazolinone herbicides improved dramatically in maize, oilseed rape, rice and wheat when serine was replaced with asparagine at position 653 (positions in this section reference A. thaliana). In maize, a mutation from tryptophan to leucine at position 574 improved maize crop tolerance to the imidazolinone, sulfonylurea, triazolopyrimidine and pyrimidinylthiobenzoate chemical families. Consistent with these results in maize, in the present studies, a mutation from tryptophan to leucine at position 574 improved soybean tolerance to all five chemical families with ALS activity. For the imidazolinone-tolerant crops, oilseed rape and spring wheat, two mutations of ALS loci were required to produce crop hybrids or varieties with sufficient tolerance to be treated commercially with an imidazolinone herbicide for weed control.26 In oilseed rape, the two loci were unlinked and additive for improved tolerance to the herbicide. No information is given regarding how the two loci in spring wheat interact. In these studies with soybean, mutations at the two independent loci (positions 197 and 574) acted synergistically for improved crop tolerance to several of the ALS herbicides from different chemical families.

DISCUSSION

The genetic sequence information from this study has confirmed that the Als1 and Als2 mutations are indeed caused by base substitutions within the coding regions of known ALS genes. This study has also confirmed previous evidence that Als1 and Als2 are unlinked and on different chromosomes (GM04 and GM06 respectively). Although the Als1 and Als2 mutations are not linked, the combination of these two mutations is synergistic for improved tolerance of soybean to ALS-inhibiting herbicides. Most importantly, knowledge of the exact DNA sequence changes can be used to develop genetic markers that are optimized for detection of the causative SNPs responsible for the SU-resistant phenotypes. Markers designed around causative SNPs are preferred to markers that are merely linked with the trait of interest. Even closely linked markers could be linked in repulsion in some germplasm and/or decoupled from the causative SNP by recombination in future breeding cycles. Optimized markers will facilitate rapid and precise incorporation of these commercially useful mutations into a wide variety of elite soybean germplasm.

Acknowledgments

The authors wish to thank Alfredo Madrigal, Dan Siehl, the Hayward Vector Construction Group, the Pioneer Informatics group, the Controlled Environments Group and the Global Markers Technology Group.

REFERENCES

  • 1.Singh BK. Biosynthesis of valine, leucine and isoleucine. In: Singh BK, editor. Plant Amino Acids: Biochemistry and Biotechnology. New York, NY: Marcel Dekker; 1999. pp. 227–247. [Google Scholar]
  • 2.Brown HM, Neighbors SM. Soybean metabolism of chlorimuron ethyl: physiological basis for soybean selectivity. Pestic Biochem Physiol. 1987;29:112–120. [Google Scholar]
  • 3.Brown HM, Wittenbach VA, Forney DR, Strachan SD. Basis for soybean tolerance to thifensulfuron methyl. Pestic Biochem Physiol. 1990;37:303–313. [Google Scholar]
  • 4.Yu Q, Han H, Vila-Aiub MM, Powles SB. AHAS herbicide resistance endowing mutations: effect on AHAS functionality and plant growth. J Exp Bot. 2010;61:3925–3934. doi: 10.1093/jxb/erq205. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 5.Duggleby RG, McCourt JA, Guddat LW. Structure and mechanism of inhibition of plant acetohydroxyacid synthase. Plant Physiol Biochem. 2008;46:309–324. doi: 10.1016/j.plaphy.2007.12.004. [DOI] [PubMed] [Google Scholar]
  • 6.Sebastian SA, Fader GM, Ulrich JF, Forney DR, Chaleff RS. Semidominant soybean mutation for resistance to sulfonylurea herbicides. Crop Sci. 1989;29:1403–1408. [Google Scholar]
  • 7.Sebastian SA. Soybean plants with dominant selectable trait for herbicide resistance. 1992. US Patent 5084082.
  • 8.Green JM. Review of glyphosate and ALS-inhibiting herbicide crop resistance and resistant weed management. Weed Technol. 2007;21:547–558. [Google Scholar]
  • 9.Green JM, Owen MDK. Herbicide-resistant crops: utilities and limitations for herbicide-resistant weed management. J Agric Food Chem. 2010;59:5819–5829. doi: 10.1021/jf101286h. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 10.Altschul SF, Madden TL, Schaffer AA, Zhang J, Zhang Z, Miller W, et al. Gapped BLAST and PSI-BLAST: a new generation of protein database search programs. Nucleic Acids Res. 1997;25:3389–3402. doi: 10.1093/nar/25.17.3389. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 11.Schmutz J, Cannon SB, Schlueter J, Ma J, Mitros T, Nelson W, et al. Genome sequence of the palaeopolyploid soybean. Nature. 2010;463:178–183. doi: 10.1038/nature08670. [DOI] [PubMed] [Google Scholar]
  • 12.Ritchie SW, Hanway JJ, Thompson HE, Benson GO. How a soybean plant develops. Special Report No. 53; Iowa State University Cooperative Extension Service, Ames, IA. 1989. [Google Scholar]
  • 13.McCullagh P, Nelder JA. Generalized Linear Models. London, UK: Chapman and Hall; 1989. 2nd edition. [Google Scholar]
  • 14.Finney DJ, editor. Probit Analysis. London, UK: Cambridge University Press; 1971. 3rd edition. [Google Scholar]
  • 15.Tallarida RJ. An overview of drug combination analysis with isobolograms. J Pharmacol Exp Ther. 2006;319:1–7. doi: 10.1124/jpet.106.104117. [DOI] [PubMed] [Google Scholar]
  • 16.Ferry NM, Stanley BH, Armel GR. Proc Conf – Applied Statistics in Agriculture. Manhattan, KS: Kansas State University; 2005. The design and analysis of biological assays of mixtures. CD-ROM. [Google Scholar]
  • 17.Green JM, Streibig JC. Herbicide mixtures. In: Streibig JC, Kudsk P, editors. Herbicide Bioassays. Boca Raton, FL: CRC; 1993. pp. 117–134. [Google Scholar]
  • 18.Tammes PML. Isoboles, a graphic representation of synergism in pesticides. Neth J Plant Pathol. 1964;70:73–80. [Google Scholar]
  • 19.Loewe S, Muischnek H. Über Kombinationswirkungen. Naunyn-Schmiedeberg's Arch Pharmacol. 1926;114:313–326. [Google Scholar]
  • 20.Berenbaum MC. What is synergy? Pharmacol Rev. 1989;41:93–141. [PubMed] [Google Scholar]
  • 21.Bedbrook JR, Chaleff RS, Falco SC, Mazur BJ, Somerville CR, Yadav NS. Nucleic acid fragment encoding herbicide resistant plant acetolactate synthase. 1995. US Patent 5378824.
  • 22.Lee KY, Townsend J, Tepperman J, Black M, Chui CF, Mazur B, et al. The molecular basis of sulfonylurea herbicide resistance in tobacco. Embo J. 1988;7:1241–1248. doi: 10.1002/j.1460-2075.1988.tb02937.x. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 23.Mazur BJ, Falco SC. The development of herbicide resistant crops. Annu Rev Plant Biol. 1989;40:441–470. [Google Scholar]
  • 24.Bustin SA, Benes V, Garson JA, Hellemans J, Huggett J, Kubista M, et al. The MIQE guidelines: minimum information for publication of quantitative real-time PCR experiments. Clin Chem. 2009;55:611–622. doi: 10.1373/clinchem.2008.112797. [DOI] [PubMed] [Google Scholar]
  • 25.Pfaffl MW. A new mathematical model for relative quantification in real-time RT-PCR. Nucleic Acids Res. 2001;29:e45. doi: 10.1093/nar/29.9.e45. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 26.Tan S, Evans RR, Dahmer ML, Singh BK, Shaner DL. Imidazolinone-tolerant crops: history, current status and future. Pest Manag Sci. 2005;61:246–257. doi: 10.1002/ps.993. [DOI] [PubMed] [Google Scholar]

Articles from Pest Management Science are provided here courtesy of Wiley

RESOURCES