Skip to main content
PMC home page
Nature Portfolio logoLink to Nature Portfolio
. 2015 Jan 20;6:5879. doi: 10.1038/ncomms6879

Total synthesis of periploside A, a unique pregnane hexasaccharide with potent immunosuppressive effects

Xiaheng Zhang 1, Yu Zhou 2, Jianping Zuo 2, Biao Yu 1,a
PMCID: PMC4309423  PMID: 25600477

Abstract

Periploside A is a pregnane hexasaccharide identified from the Chinese medicinal plant Periploca sepium, which features a unique seven-membered formyl acetal bridged orthoester (FABO) motif and potent immunosuppressive activities. Here, we show the synthesis of this molecule in a total of 76 steps with the longest linear sequence of 29 steps and 9.2% overall yield. The FABO motif is constructed via a combination of Sinaÿ’s and Crich’s protocol for the formation of orthoester and acetal glycosides, respectively. The 2-deoxy-β-glycosidic linkages are assembled stereoselectively with judicious choice of the glycosylation methods. The epimer at the spiro-quaternary carbon in the FABO motif has also been elaborated in a stereo-controlled manner. This epimer, as well as the synthetic analogues bearing the FABO motif, retain largely the inhibitory activities of periploside A against the proliferation of T-lymphocyte, indicating the importance of the chemical connection of the FABO motif to their immunosuppressive activity.

Inline graphicPeriploside A is a natural pregnane glycoside with promising immunosuppressive properties, but the presence of a seven-membered formyl acetal bridged orthoester makes it difficult to chemically synthesize. Here, the authors present a 76-step total synthesis of periploside A.

Periploside A (or Periplocoside E) is the prototypical member of a group of pregnane glycosides isolated from Periploca sepium and P. forrestii (Asclepiadaceae), which features a unique seven-membered formyl acetal bridged orthoester (FABO) linkage between two sugar units1,2,3,4,5,6,7. This natural product shows immunosuppressive activities, that is, it inhibits the ConA-induced T cell proliferation as potently as rapamycin and cyclosporin A while showing reasonably low toxicity (IC50=0.64 μM and CC50=10.1 μM)5,6. The immunosuppressive effects of periploside A has also been found significant in mice models8,9,10, that validates the folkloric reputation of the plant as a traditional Chinese medicine for rheumatoid arthritis11. Such autoimmune diseases as rheumatoid arthritis, multiple sclerosis, systemic lupus erythematosus and Crohn’s disease, are notoriously malignant and refractory, thus efficacious new immunosuppressant drugs have long been a quest12.

The FABO motif in periplosides, which has been found critical to their activities6, remains ambiguous in both the chemical connection and stereochemistry for over two decades. In 1987, Hikino et al. reported the first structural assignment of periploside A, in that the connection of the orthoester was proposed on the basis of extensive chemical degradation and spectroscopic analysis1. However, the stereochemistry of the quaternary anomeric carbon was overlooked but drawn in a configuration comprising an unusual α-(1→4)-glycosidic linkage (1a). Shortly afterwards, Itokawa et al.2,3,4 suggested a novel peroxy linkage (1b) for periplosides (and named as periplocosides), as misled by a conventional colour reaction of peroxides, although all the analytical data of periplocoside E were found identical to those of the previous periploside A (ref. 3). This peroxide structure was then accepted till 2011 (refs 5, 6), Zhao and coworkers acquired an X-ray diffraction of a single crystal of a periploside congener, confirming the originally assigned FABO connection6. Unfortunately, the stereochemistry of the spiro-quaternary carbon remained incorrect until we examined it carefully during our journey toward the synthesis of periploside A (ref. 7).

Herein, we report the first total synthesis of periploside A (1), employing total of 76 steps of transformations from glucal, methyl α-D-glucopyranoside and dehydroepiandrosterone, with the longest linear sequence of 29 steps and in 9.2% overall yield. The stereoselective construction of the FABO motif with either the natural or unnatural configuration at the anomeric spiro-quaternary center is achieved via alternative combination of Crich’s protocol for acetal glycoside synthesis and Sinaÿ’s protocol for glycosyl orthoester formation. The 2-deoxy-β-glycosidic linkages are synthesized by glycosylation with trifluoroacetimidate donors (6/27) equipped with 2-iodide, with digitoxosyl ortho-alkynylbenzoate donor (8) installed with bulky TBDPS group on the remote 3,4-OH, and with cymarosyl ortho-alkynylbenzoate donor (2) under the promotion of Ph3PAuOTf/TTBP. In addition, a preliminary structure–activity relationship of the synthetic periplosides against the proliferation of T-lymphocyte is provided, indicating the importance of the chemical connection of the FABO motif to the activities.

Results

Retrosynthetic analysis

Given the big size and linear structure of the target molecule, a convergent synthesis was desired13. Thus, periploside A (1) was disconnected into two fragments of similar complexity, that is, tetrasaccharide donor 2 and pregnane FABO disaccharide 3 (Fig. 1). The (1→4)-cymarosyl linkage between the tetrasaccharide unit and 3 would be difficult to construct in favour of formation of the thermodynamically unfavored β-anomer14,15,16,17; the glycosylation protocol with ortho-alkynylbenzoates as leaving groups (as in 2) under the catalysis of a gold(I) complex could address this problem, in that substitution via an α-glycosyloxypyrylium or α-triflate intermediate might get invoked18. The β-(1→4)-cymarosyl linkages in tetrasaccharide 2, however, could be built stereoselectively under the influence of a substituent at the axial 3-OH of a digitoxosyl donor, which could subsequently be converted into the required methyl group. In this respect, we had screened carefully during the synthesis of digitoxin and gordonoside F and found gold(I)-catalysed glycosylation with digitoxosyl ortho-cyclopropylethynylbenzoate equipped with two bulky TBDPS groups at 3,4-OH (that is, 8) to be an optimal choice15,17. After furnishing the cymarose trisaccharide 5, its coupling with the terminal digitalose unit could be realized with donor 4, in that the formation of the β-linkage should be secured by participation of the 2-O-acetyl group; and the 4-O-chloroacetyl group was selectively removable afterwards. The p-methoxyphenyl (MP) group was employed throughout (as in 5, 9 and 11) as the anomeric protecting group, which could remain intact before cleavage and subsequently converting the saccharides into donors (for example, 2 and 6).

Figure 1. Periploside A 1 and the retrosynthetic analysis.

Figure 1

Open in a new tab

Shadowed in pale blue are the FABO motifs that have been previously assigned; highlighted in red are leaving groups in donors and in blue are hydroxyl groups in acceptors. Ac, acetyl; CA, chloroacetyl; MP, 4-methoxyphenyl; TBDPS, tert-butyldiphenylsilyl; TBS, tert-butyldimethylsilyl.

Uncertainty lies in the synthesis of FABO disaccharide 3. Condensation of 3β-silyloxy-pregnene-17α,20α-diol 7 with disaccharide trifluoroacetimidate 6, one of the most reliable type of glycosylation donors19, which was equipped with an equatorial iodide at C2 (ref. 20), would lead to the desired C20-O-β-glycoside 3 in a regio- and stereo- selective manner. However, few clues occur in the literatures, which could lead to the construction of a disaccharide precursor consisting of the FABO linkage. The most promising approach turned out to be a combination of Crich’s protocol to form the formyl acetal glycosidic linkage (from a thiomethyl glycoside donor such as 10; ref. 21) and Sinaÿ’s protocol to synthesize the anomeric orthoester via a ketene acetal intermediate (derived from a 2-selenoglycoside such as 9; refs 22, 23, 24). However, the tolerance of the formyl acetal (in 9) towards the strong conditions required for Sinaÿ’s oxidation–elimination–cyclization sequence and the stereochemistry in the formation of the seven-membered spiro-orthoester were beyond estimation.

Synthesis of tetrasaccharide donor 2

The desired digitalosyl and digtoxosyl ortho-cyclopropylethynylbenzoates 4 and 8 were prepared in a robust manner from D-fucose (13 steps and 37% overall yield) (see Supplementary Methods) and methyl α-D-glucopyranoside (10 steps and 47% overall yield)15, respectively. Subjection of 8 to glycosidation with p-methoxyphenol under optimized conditions (0.1 equivalent (equiv) Ph3PAuNTf2, toluene, 4 Å molecular sieves (MS), −40 °C) led to β-glycoside 12 as the sole anomer in an excellent 95% yield (Fig. 2). Removal of the 3,4-di-O-TBDPS group followed by selective acetylation of the axial 3-OH via orthoester formation/hydrolysis provided glycoside 13 bearing a free 4-OH (92%, two steps)25. Similar transformations were then applied to extend monosaccharide 13 to trisaccharide 17, in that the glycosidation of 8 with monosaccharide acceptor 13 and disaccharide acceptor 15 led to the corresponding coupled 2-deoxy-β-saccharides nearly quantitatively. Trisaccharide 3′′,4′′-diol 17 was then subjected to a tin-mediated selective benzylation on the equatorial 4′′-OH (ref. 26); cleavage and scramble of the acetyl groups on the axial hydroxyl groups were detected, nevertheless, exposure of the resultant mixture to LiOH afforded 18 in excellent yield (87%, three steps). The three axial hydroxyl groups in 18 were then methylated (99%). Unexpectedly, hydrogenolysis of the 4′′-O-benzyl group in trisaccharide 19 under conventional conditions (Pd(OH)2/C, H2, room temperature (RT)) led to cleavage of the glycosidic linkages, testifying the vulnerability of the cymarosyl-β-(1→4)-linkage. Thus, Et3N was added to sequester any nascent proton; the hydrogenolysis proceeded sluggishly, nevertheless, leading to the desired trisaccharide 5 in a satisfactory 93% yield at 50 °C for 2 days.

Figure 2. Synthesis of tetrasaccharide donor 2.

Figure 2

Open in a new tab

Highlighted in red are the nascent glycosidic bonds. (a) Ph3PAuNTf2 (0.1 equiv), toluene, 4 Å MS, −40 °C; 95% and β only (for 12); 99% and β only (for 14 and 16); (b) TBAF, THF, 0 °C to RT; 99% (from 12); 94% (from 14); 96% (from 16); (c) CH3(OMe)3, p-TsOH, RT, 93% for (13); 91% (for 15); (d) nBu2SnO, MeOH, reflux; (e) BnBr, DMF, CsF, RT; (f) LiOH, THF, H2O, RT; 87% (for three steps); (g) MeI, NaH, DMF, 0 °C to RT, 99%; (h) Pd(OH)2/C, H2 (1 atm), Et3N, EtOAc, MeOH, 50 °C, 93%; (i) Ph3PAuNTf2 (0.2 equiv), toluene, 5 Å MS, −50 °C to RT, 93%, β/α=4/1; (j) Ag(DPAH)2, CH3CN, H2O, 0 °C to RT, 95%; (k) o-cyclopropylethynylbenzoic acid, EDCI, DMAP, 4 Å MS, CH2Cl2, RT, 99%. DMAP, 4,4-dimethylaminopyridine; DPAH, bis(hydrogen dipicolinate); EDCI, N-ethyl-N′-(3-dimethylaminopropyl)carbodiimide hydrochloride; MS, molecular sieves; TBAF, tetrabutylammonium fluoride.

Given the acid lability of the cymarosyl-β-(1→4)-linkage, it was not fully surprising to find that glycosylation of trisaccharide acceptor 5 with digitalosyl donor 4 in the presence of Ph3PAuOTf led to considerable cleavage of the trisaccharide. Ph3PAuNTf2 was found to be more stable towards moisture (thus less acidic)27, therefore, it catalysed the condensation of 5 and 4 smoothly. However, in spite of the presence of 2-O-acetyl group in donor 4, the glycosylation led to anomeric mixtures of the coupled tetrasaccharide. Under optimized conditions (0.2 equiv Ph3PAuNTf2, toluene, 5Å MS, −50 °C to RT), tetrasaccharide 20 was obtained in 93% yield with β/α ratio of 4:1, which was separable on silica gel column chromatography. Removal of the anomeric MP group in tetrasaccharide 20 with CAN was not successful under a variety of conditions, resulting unavoidably degradation of the cymarosyl-β-(1→4)-linkages. Fortunately, a mild oxidizing agent, Ag(DPAH)2, could achieve this task (CH3CN/H2O, 0 °C to RT) to afford smoothly the corresponding hemiacetal (95%) (ref. 28), which was then subjected to the formation of ortho-cyclopropylethynylbenzoate 2 (99%) (see Supplementary Methods).

Attempts at construction of the FABO motif

We have tried a number of approaches to the construction of the FABO disaccharide motif, those include condensation of sugar lactones with vicinal diols in the presence of formaldehyde or its surrogates29,30, transacetalation of sugar lactones with sugar 4-hydroxyl-3-methyoxymethyl ether derivatives31, and intramolecular hydrogen atom transfer reactions of formyl acetal linked disaccharides21,32,33. However, no coupled FABO products have ever been detected, that prompted us to focus our attention on the planned Crich–Sinaÿ approach (Fig. 3). Thus, starting from D-glucal triacetate, 3-O-methyl-6-bromo-glucal 21 and p-methoxyphenyl 2,6-dideoxy-2-iodo-glucoside 11 were prepared in seven steps (66% overall yield) and 13 steps (18% overall yield), respectively (see Supplementary Methods). Glucal 21 was converted into the desired phenylthiomethyl 2-phenylseleno-α-D-mannopyranoside 10 in three steps (45%), that is, addition with PhSeCl to provide 2-phenylseleno-D-mannopyranose 22, conversion of the lactol into fluoride with DAST, and subsequent glycosidation with PhSCH2OH in the presence of SnCl2 (refs 23, 34). Condensation of 10 with sugar acceptor 11 under Crich’s conditions (NIS, TfOH, CH2Cl2, −30 °C) did lead to the desired acetal glycoside 24, albeit in only a moderate yield of ~30%; the major product turned out to be the α-glycoside 23 (~65%). A wide variety of the promoters for glycosidation of thioglycosides35 were screened in the present coupling (see Supplementary Table 1), including NBS/TfOH36, Tf2O/BSP/TTBP37, DMTST/TTBP38, MeOTf39 and NIS/AgOTf40. However, the yield of acetal glycoside 24 was not improved. These results indicate that the transient glycosyloxymethyl cation (generated from 10) decomposes favourably to the glycosyl oxocarbenium species (and a molecule of formaldehyde); capture of the oxocarbenium intermediate by the incoming hydroxyl group (in 11) leads to disaccharide 23. Adjustment of the substituting groups in donor 10, that is, removal of the 6-bromide and/or replacement of the 4-O-benzoyl group with benzyl group also failed to improve the yields of the corresponding acetal glycosides in condensation with 11. Gratifyingly, when we applied the inverse procedure41 (addition of donor 10 to a mixture of the acceptor 11 and promoter NIS/TfOH at −30 °C) and increased the equivalent of acceptor 11 (to 5.0 equiv), acetal glycoside 24 was obtained in a satisfactory 75% yield. The 4-O-acetyl and 4′-O-benzoyl group in 24 were removed simultaneously in the presence of MeONa in MeOH, providing diol 9 (93%), which was ready for Sinaÿ’s orthoester formation.

Figure 3. Construction of the FABO motif and synthesis of C1′′-epi-periploside A (31).

Figure 3

Open in a new tab

Highlighted in red are the nascent glycosidic bonds. (a) PhSeCl, CH3CN, −40 °C, 78%; (b) DAST, THF, −30 °C to RT; (c) PhSCH2OH, SnCl2, CH2Cl2, 4 Å MS, −40 °C to RT; 58% (for two steps); (d) NIS, TfOH, CH2Cl2, −30 °C, 75% (for 24), 20% (for 23); (e) MeONa, MeOH, CH2Cl2, RT, 93%; (f) NaIO4, NaHCO3, MeOH, CH2Cl2, H2O, RT, 99%; (g) vinyl acetate, toluene, DIPA, Mw, 145 °C, 20 min, 85%; (h) BzCl, Et3N, DMAP, CH2Cl2, 0 °C to RT, 99%; (i) Ag(DPAH)2, CH3CN, H2O, 0 °C to RT, 90%; (j) N-phenyl-2,2,2-trifluoroacetimidoyl chloride, Cs2CO3, CH2Cl2, RT, 95%; (k) TBSOTf, CH2Cl2, 5 Å MS, −78 °C, 85%, β/α=3/1; (l) Et3B, Bu3SnH, toluene, RT, 97%; (m) MeONa, MeOH, CH2Cl2, RT, 99%; (n) Ph3PAuOTf (0.8 equiv), TTBP, CH2Cl2, 4 Å MS, −20 °C to −10 °C, 64% (87% b.r.s.m.), β/α=2.1/1; (o) thiourea, pyridine, EtOH, 80 °C; (p) HF·py, pyridine; THF, 0 °C to RT; 91% (for two steps). DAST, (diethylamino)sulfur trifluoride; DIPA, diisopropylamine; TBSOTf, tert-butyldimethylsilyl trifluoromethane sulfonate; Mw, microwave; TTBP, 2,4,6-tri-tert-butylpyrimidine.

Thus, 2′-seleno-disaccharide 9 was subjected to oxidation (NaIO4, NaHCO3, MeOH/CH2Cl2/H2O, RT) to provide the selenoxide cleanly, subsequent syn-elimination and intramolecular cyclization of the resultant ketene acetal (A) took place sluggishly under forced conditions (vinyl acetate/toluene/DIPA, 140 °C), leading to an orthoester product (25) in a moderate 20% yield for 12 h. By carefully screening the reaction conditions, we finally managed to obtain 25 in an excellent 85% yield under microwave irradiation (145 °C, 20 min). The addition of the 4-hydroxyl group onto C1′ of the ketene acetal in A could proceed from both the top and the bottom faces, thus two diastereoisomers should be provided. Surprisingly, only one isomer (25) was isolated under various conditions. We had expected that the diastereoselectivity bestowed by the two sugar units could lead to formation of the native configuration in the natural product (opposite to that drawn in 25). However, in the previous synthesis of the Sinaÿ-type five- and six-membered orthoesters, cyclization of the incipient ketene acetals was found to favour formation of the axial α-linkage, so as to maximize the anomeric effect22,23,24 or to follow the trajectory of addition onto Woerpel’s low-energy conformer of the dioxocarbenium intermediate42,43. Determination of the configuration of the quaternary C1′ in 25 was not possible by spectroscopic methods, especially without comparison to its epimer, and attempts at acquisition of a single crystal of 25 or its derivatives for X-ray diffraction analysis were unsuccessful. Therefore, this problem was not solved until completion of the total synthesis.

Synthesis of C1′′-epi-periploside A (31)

Temporary protection of the 4′-OH in 25 with benzoyl group led to 26 (99%), which was subjected to selective cleavage of the anomeric MP group (Ag(DPAH)2, CH3CN, H2O, 90%) and subsequent formation of trifluoroacetimidate (95%) to afford the desired donor 27 (Fig. 3). Glycosylation of pregnane diol 7, which was prepared from hydroxyandrost-5-en-17-one in three steps (see Supplementary Methods and Supplementary Fig. 59), with disaccharide imidate 27 proceeded smoothly under the catalysis of TBSOTf (0.1 equiv) in the presence of 5 Å MS at −78 °C in CH2Cl2, affording pregnane 20-O-disaccharide 28 in 85% (96%, b.r.s.m.) yield and β/α ratio of 3:1. The erosion of 1,2-trans-selectivity in the glycosylation with a donor (that is, 27) equipped with an iodide at C2 could be contributed to the presence of the FABO motif, which might cause conformational restraint for the neighbouring participation. Notably, the present reaction must be quenched at −78 °C (with Et3N), so as to avoid the decomposition of the acid-labile FABO motif. Reductive removal of the bromide and iodide in 28 under the conventional radical conditions (AIBN/Bu3SnH, toluene, 80 °C) led to decomposition of the substrate. Et3B could initiate the radical reaction at RT44, which thus enabled the reduction of 28 with Bu3SnH to proceed smoothly to afford the corresponding deoxydisaccharide (99%). Subsequent removal of the 4′-O-benzoyl group provided the desired pregnane 20-O-disaccharide 29 (99%).

The expected challenge in stereoselective construction of the 2-deoxy-β-cymarosyl-(1→4)-linkage in the union of tetrasaccharide 2 and pregnane disaccharide 29 was further manifested by the fact that both the 2,6-dideoxyglycosidic linkages and the FABO motif were shown to be extremely labile toward acid. Thus, we screened carefully the coupling conditions, including the gold(I) catalyst, solvent and temperature. When the coupling of 2 and 29 was conducted in the presence of Ph3PAuNTf2 (0.2 equiv), the coupled hexasaccharide was obtained in good yield (50%) but in favour of the thermodynamically more stable α-anomer (β/α~1:3). With Ph3PAuOTf as the catalyst, however, the reaction of 2 and 29 provided a messy mixture. Careful isolation led to identification of a pentasaccharide lactone, which was derived from cleavage of the FABO linkage in the coupled hexasaccharide (30). Encouragingly, the originally formed cymarosyl-(1→4)-linkage in the resultant pentasaccharide lactone was found in the required β configuration, implying that the glycosylation reaction took place via a glycosyl α-triflate intermediate18. Nevertheless, the HOTf generated after glycosylation, before being quenched by the isochromen-4-yl gold(I) complex45, degraded the FABO linkage. On the basis of this rational, we introduced a hindered base, that is, 2,4,6-tri-tert-butylpyrimidine (TTBP), into the present Ph3PAuOTf-catalysed glycosylation to rest the incipient HOTf, so as to avoid the cleavage of the FABO linkage. The sequester of the HOTf also retarded the gold(I) catalytic cycle, therefore, requiring almost equivalent of the gold complex to drive the reaction to completion45,46. In fact, the condensation of 2 and 29 proceeded smoothly in the presence of Ph3PAuOTf (0.8 equiv) and TTBP (1.5 equiv) in CH2Cl2 at −10 °C, leading to the coupled hexasaccharide 30 in a satisfactory yield of 64% (87%, b.r.s.m.) and β/α ratio of 2.1:1. Finally, removal of the terminal CA group and TBS group was achieved with thiourea47 and pyridine-buffered HF·pyridine, respectively, furnishing the target pregnane hexasaccharide 31 cleanly (91%, two steps).

The 1H and 13C NMR spectra of 31 are similar to those of the authentic periploside A (1) (see Supplementary Figs 60 and 61). However, discrepancies occur for the signals from the formyl acetyl CH2 residue (88.4 p.p.m. for the 13C signal in 31 versus 86.4 p.p.m. in 1; 4.93 and 4.82 p.p.m. for the 1H signals in 31 versus 5.13 and 4.74 p.p.m. in 1) (see Supplementary Table 3). In addition, the adjacent C4′, C2′′ and C3′′ are also in disparate chemical shifts (C4′: 81.5 versus 79.2 p.p.m.; C2′′: 37.9 versus 36.7 p.p.m.; C3′′: 77.4 versus 78.3 p.p.m., in 31 and 1, respectively). These discrepancies indicate that the synthetic 31 is indeed the epimer of periploside A (1) with the opposite configuration at the quaternary C1′′. The problem of diastereoselectivity in the previous formation of the FABO motif is thus addressed.

Construction of the FABO motif of the natural configuration

The addition of the hydroxyl group onto the ketene acetal in A proceeded exclusively from the α face, leading to the FABO disaccharide with the unnatural configuration (9→25). The presence of a nucleophile capable of interception of the oxocarbenium species developed from the ketene acetal might lead to a thermodynamically favored α-intermediate; substitution of the intermediate in situ by the 4-hydroxyl group would then proceed from the β face to provide the FABO disaccharide with the natural configuration. Therefore, we tried the elimination/cyclization (from 9) in various nucleophilic solvents, including CH3CN, 1,4-dioxane, THF, DME, DMF and MeOH, under varied temperatures; however, the only FABO disaccharide identified was 25. Addition of nucleophilic additives, such as 4-dimethylaminopyridine (DMAP), LiBr, NaBr and NaI, was also found futile. The presence of an electrophilic reagent, such as NIS, NBS and I2, might convert the ketene acetal into a 1,2-halonium intermediate, which could then be attacked by the 4-hydroxyl group to give the FABO disaccharide. These attempts were again unsuccessful.

The failure in formation of the seven-membered orthoester in the desired stereochemistry forced us to construct the orthoester before cyclization of the formyl acetal (Fig. 4). Thus, 2-phenylseleno-D-mannopyranoside 22 was converted into the fluoride (with DAST), which was then coupled with sugar acceptor 32 (see Supplementary Methods) under the action of SnCl2 to give α-disaccharide 33 (85%). Gratifyingly, after intensive attempts, we managed to obtain the ketene acetal 34 in excellent yield (91%) from disaccharide 33 via selenoxide formation and syn-elimination under the modified Sinaÿ conditions (NaIO4, NaHCO3, MeOH/CH2Cl2/H2O, RT; then vinyl acetate/toluene/DIPA, microwave 140 °C, 40 min). Although purification of 34 on silica gel required the addition of 1% Et3N in the eluent to prevent hydrolysis, the purified ketene acetal 34 remained stable at −20 °C for several days. To the best of our knowledge, this is the first time a ketene acetal linked disaccharide (that is, 34) being isolated. Noteworthy is the decisive role played by the 3-O-Lev group (in 33–35), which facilitated the procurement of the ketene acetal disaccharide as well as the selective removal afterwards; in contrast, analogues of 33 bearing an electron-donating group (for example, TBS) at the 3-OH led to decomposed monosaccharide derivatives under identical conditions.

Figure 4. Construction of the FABO motif with the natural configuration.

Figure 4

Open in a new tab

Highlighted in red are the nascent glycosidic bonds. (a) DAST, THF, −30 °C to RT; (b) SnCl2, Et2O, 4 Å MS, 0 °C to RT; 85% (for two steps); (c) NaIO4, NaHCO3, MeOH, CH2Cl2, H2O, RT, 99%; (d) vinyl acetate, toluene, DIPA, Mw, 140 °C, 40 min, 92%; (e) EtSCH2OH, DCCl3, Mw, 10 min, 110 °C, 81%; (f) H2NNH2·H2O, pyridine, HOAc, 0 °C to RT, 92%; (g) BSP, Tf2O, DTBP, 5 Å MS, Et2O, −114 °C, 64% (for 37), 18% (for 38). BSP, 1-benzenesulfinyl piperidine; DTBP, 2,6-di-tert-butylpyridine; Lev, levuloyl; Mw, microwave.

Addition of PhSCH2OH onto ketene acetal 34 was first attempted in CDCl3 at 50 °C (ref. 48), the starting ketene acetal decomposed largely in 12 h, with the desired orthoester being isolated in low yield (20%) as a single α-isomer. By raising the temperature and shortening the reaction duration (CDCl3, microwave 100 °C, 1 h), the addition of 34 and PhSCH2OH led to the desired orthoester in a good 70% yield but in a moderate diastereoselectivity of 1.4/1. Modification of the reaction conditions by the addition of acidic promoters (p-TsOH or PPTS) or variation of solvent (toluene, CH2Cl2 or CHCl3) failed to improve the yield or the diastereoselectivity. Fortunately, replacement of PhSCH2OH with the more nucleophilic EtSCH2OH, the addition with ketene acetal 34 under the optimal conditions (CDCl3, microwave 110 °C, 10 min) furnished the desired orthoester 35 in 81% yield as a single α-isomer. It should be noted that the replacement of CDCl3 with CHCl3 or toluene led to lower yields of 35 (<65%). Selective removal of the 3-O-Lev group in 35 was achieved with H2NNH2·H2O to provide orthoester 36 (92%).

Treatment of ethylthiomethyl glycoside 36 with the mild promoters for glycosidation of thioglycosides (see Supplementary Table 2), such as MeOTf/TTBP, DMTST/TTBP, and CuBr2/Bu4NBr49, failed to afford the seven-membered FABO derivative 37; instead, the five-membered orthoester 38 was isolated in high yield (>80%) as a mixture of the two diastereoisomers. These results indicate again (cf., 10→23/24) that the glycosyloxymethyl cation (B) generated via activation of the thioacetal could readily undergo decomposition to the glycosyl oxocarbenium (C) and formaldehyde; intramolecular addition of the proximal hydroxyl group to C led to the five-membered orthoester. Thus, a strong promoter which can activate the thioacetal under milder conditions might be able to allow the transient glycosyloxymethyl cation B to be captured by the hydroxyl group before decomposition. Using Crich’s conditions (Tf2O/BSP/TTBP, −60 °C, CH2Cl2)37, however, the five-membered orthoester 38 was again obtained nearly quantitatively as a mixture of the diastereoisomers. Encouragingly, when lowering the reaction temperature to −78 °C, a trace amount of the desired seven-membered FABO product 37 was detected. Optimizing along this direction, we finally managed to obtain the desired 37 in a satisfactory 64% yield in the presence of Tf2O/BSP/DTBP in Et2O at −114 °C, whereas the five-membered orthoester 38 was isolated in 18% yield as a single diastereoisomer. Comparison of the NMR data of the present FABO disaccharide 37 with those of the previous 26 supported that we had fixed the desired configuration by the present approach.

Completion of the synthesis of periploside A (1)

The transformations previously developed for the synthesis of C1′′-epi-periploside A (26→31, eight steps, 28% overall yield) were applied to the synthesis of periploside A (Fig. 5). Thus, FABO disaccharide 37 was subjected to selective cleavage of the anomeric MP group (with Ag(DPAH)2, 91%) and conversion into the trifluoroacetimidate donor 6 (90%). Coupling of pregnane diol 7 with donor 6 under the similar conditions as that for 7+27→28 (85%, β/α=3:1) led to the corresponding disaccharide 39 in a similar yield (87%) but much higher β selectivity (β/α=6.1:1). This result supports the previous assumption that the conformational restraint provided by the FABO motif affects the glycosidation transition state of the disaccharide. The bromide and iodide in 39 were removed cleanly with Et3B/Bu3SnH (95%); subsequent cleavage of the 4′-O-benzoyl group (NaOMe, HOMe, 96%) provided the desired disaccharide acceptor 3. Condensation of 3 with tetrasaccharide donor 2 under the optimized conditions for 29+2→30 (64%, β/α=2.1:1) afforded hexasaccharide 40 in a higher 80% (92%, b.r.s.m.) yield and similar β/α ratio of 2:1. Finally, the terminal CA and TBS groups were removed successfully with thiourea and pyridine-buffered HF-pyridine, respectively, furnishing the target periploside A (1) (93%, two steps). Gratifyingly, all the analytical data of 1 are in full agreement with those obtained for the natural product1 (see Supplementary Table 3).

Figure 5. Completion of the total synthesis of periploside A (1).

Figure 5

Open in a new tab

Highlighted in red are the nascent glycosidic bonds. (a) Ag(DPAH)2, CH3CN, H2O, 0 °C, 91%; (b) N-phenyl-trifluoroacetimidoyl chloride, Cs2CO3, CH2Cl2, RT, 90%; (c) TBSOTf, CH2Cl2, 5 Å MS, −78 °C, 87%, β/α=6.1/1; (d) Et3B, Bu3SnH, toluene, RT, 95%; (e) MeONa, MeOH, CH2Cl2, RT, 96%; (f) Ph3PAuOTf (0.8 equiv), TTBP, CH2Cl2, 4 Å MS, −10 °C, 80%, β/α=2/1; (g) thiourea, pyridine, EtOH, 80 °C; (h) HF·py, pyridine, THF, 0 °C to RT, 93% (for two steps).

The immunosuppressive activities of the synthetic compounds

The synthetic periploside A (1) showed similar toxicity and activity as the natural product against T-lymphocyte and their proliferation induced by ConA5,6. The C1′′-epimer (31) which has the opposite configuration at the FABO motif as in periploside A was also found active (IC50=0.41 μM), although being ~2.4-fold less potent than the natural product (Table 1). The C1′′′-epimer of periploside A (41) was also active (IC50=1.96 μM) (Fig. 6). Interestingly, disaccharide 42, with the tetrasaccharide in 31 being truncated, still had certain activity (IC50=6.20 μM); and its α-anomer 43 even showed a higher activity (IC50=3.70 μM). Previous assays have demonstrated that reductive cleavage of the formyl acetal in the FABO motif in periploside A abolished the activity completely6. Taken together, it demonstrates that the chemical connection of the FABO motif, rather than the stereochemistry, has a critical role in the immunosuppressive activities of periplosides. The capability of releasing a formylaldehyde might be taken into account in the future researches into the mechanism of action of this unique type of compounds.

Table 1. Inhibitory activity of periploside A and analogues against T-lymphocyte proliferation*.

Compound CC50 (μM) IC50 (μM) SI
Periploside A (1) 2.10±0.32 0.17±0.04 12
C1′′-epi-periploside A (31) 1.58±0.19 0.41±0.15 3.9
C1′′′-epi-periploside A (41) 11.40±3.66 1.96±0.43 5.8
Disaccharide 42 12.80±0.52 6.20±3.20 2.1
Disaccharide 43 27.70±6.61 3.70±2.25 7.5
Open in a new tab

Figure 6. Synthetic analogues of periplosides.

Figure 6

Open in a new tab

Shadowed in pale blue are the carbon centres with opposite configurations to those in the nature product.

Methods

General methods

All the reactions were carried out under nitrogen or argon with anhydrous solvents in flame-dried glassware, unless otherwise noted. All the glycosylation reactions were performed in the presence of 4 or 5 Å MS, which were flame-dried immediately before use in the reaction under high vacuum. Glycosylation solvents were dried using a solvent purification system and used directly without further drying. The chemicals used were reagent grade as supplied, except where noted. For details of the synthetic procedures and the characterization data of compounds, see Supplementary Methods. For 1H and 13C NMR spectra of the compounds prepared in this study, see Supplementary Figs 1–58.

Synthesis of acetal glycoside 24

To a solution of sugar alcohol 11 (620 mg, 1.47 mmol) in CH2Cl2 (5 ml) was added acid-washed 3 Å MS at RT. After stirring for 30 min at RT, NIS (142 mg, 0.63 mmol) and TfOH (2.6 μl, 0.029 mmol) were added to the mixture at −30 °C, followed by the addition of a solution of phenylthiomethyl glycoside 10 (183 mg, 0.29 mmol) in CH2Cl2 (3 ml) via a syringe pump. The reaction mixture was stirred at −30 °C for 1 h. When TLC showed the donor 10 had been consumed, saturated aqueous NaHCO3 was added at 0 °C. The mixture was filtered. The filtrate was washed with a solution of NaS2O3 and brine, respectively, and was then dried over Na2SO4 and concentrated. The residue was purified by flash chromatography (petroleum ether/CH2Cl2/EtOAc=8:1:1) to afford 24 (206 mg, 75%) and glycoside 23 (53 mg, 20%) as syrups.

Synthesis of FABO disaccharide 25

To a solution of acetal glycoside 9 (187 mg, 0.24 mmol) in MeOH/CH2Cl2/H2O (3 ml/2 ml/1 ml) were added NaIO4 (507 mg, 2.37 mmol) and NaHCO3 (159 mg, 1.90 mmol) at RT. After stirring for 3 h, the mixture was diluted with CH2Cl2, washed with saturated NH4Cl solution and brine, respectively, and was then dried over Na2SO4 and concentrated. The resultant selenoxide was azeotroped with toluene (3 × 5 ml) and dried under high vacuum for 2 h to afford a white solid (190 mg, 99%). The above selenoxide (125 mg, 0.155 mmol) was dissolved in toluene (6 ml). Diisopropylamine (3 ml) and vinyl acetate (6 ml) were added, and the reaction was conducted under microwave at 145 °C for 20 min. The mixture was cooled to RT and concentrated. The residue was purified by flash chromatography on silica gel (petroleum ether/EtOAc=1.5:1) to afford 25 (83 mg, 85%) as a colourless syrup.

Synthesis of α-disaccharide 33

To a solution of lactol 22 (603 mg, 1.21 mmol) in THF (10 ml) was added DAST (0.44 ml, 3.63 mmol) at −30 °C. After stirring for 1.5 h while warming to RT, a saturated NaHCO3 solution was added slowly to the mixture. The resulting mixture was extracted with CH2Cl2. The combined organic layer was washed with brine, dried over Na2SO4 and concentrated. The crude glycosyl fluoride was azeotroped with toluene (3 × 5 ml). After drying under high vacuum for 2 h, the above product was dissolved in Et2O (10 ml), 4 Å MS (1.2 g) and sugar alcohol 32 (330 mg, 0.69 mmol) were added and the reaction mixture was stirred at 0 °C for 30 min. SnCl2 (235 mg, 1.24 mmol) was added in one portion and the reaction mixture was allowed to warm to RT and stirred for 4 h. The mixture was quenched with Et3N (1 ml) and filtered. The solution was diluted with EtOAc and washed with water. The water layer was extracted with EtOAc twice. The combined organic layer was washed with saturated NaHCO3 solution and brine, respectively, and was then dried over Na2SO4 and concentrated. The residue was purified by flash chromatography (petroleum ether/EtOAc=4:1) to afford 33 (560 mg, 85%) as a colourless syrup.

Synthesis of ketene acetal 34

To a solution of 33 (248 mg, 0.26 mmol) in MeOH/CH2Cl2/H2O (3 ml/2 ml/1 ml) were added NaIO4 (552 mg, 2.58 mmol) and NaHCO3 (173 mg, 2.06 mmol) at RT. After stirring for 12 h at RT, the mixture was diluted with CH2Cl2, and washed with saturated NH4Cl solution and brine, respectively. The organic layer was dried over Na2SO4 and concentrated. The crude selenoxide was azeotroped with toluene (3 × 5 ml) and dried under high vacuum for 2 h to afford a colourless syrup (251 mg, 99%). The above selenoxide (104 mg, 0.11 mmol) was dissolved in toluene (2 ml). Diisopropylamine (1 ml) and vinyl acetate (2 ml) were added. The reaction was conducted under microwave at 140 °C for 40 min. The mixture was cooled to RT and concentrated. The residue was purified by flash chromatography (petroleum ether/EtOAc=5:1, containing 1% Et3N) to afford 34 (85 mg, 92%) as a colourless syrup.

Synthesis of orthoester 35

To a solution of 34 (75 mg, 0.093 mmol) in CDCl3 (3 ml) was added EtSCH2OH (0.05 ml) at RT. The reaction was conducted under microwave at 110 °C for 10 min. The mixture was cooled to RT and concentrated. The residue was purified by flash chromatography (petroleum ether/EtOAc=5:1, containing 1% Et3N) to afford 35 (67 mg, 81%) as a colourless syrup.

Synthesis of orthoester 36

To a solution of 35 (110 mg, 0.120 mmol) in pyridine/HOAc (3 ml/2 ml) was added H2NNH2 H2O (0.10 ml, 1.60 mmol) at 0 °C. After stirring at RT for 5 h, the mixture was diluted with CH2Cl2, and washed with ice water and then with a saturated NaHCO3 solution and brine, respectively. The organic layer was dried over Na2SO4 and concentrated. The residue was purified by flash chromatography (petroleum ether/EtOAc=5:1, containing 1% Et3N) to afford 36 (90 mg, 92%) as a colourless syrup.

Synthesis of FABO disaccharide 37

To a solution of 36 (19.1 mg, 0.024 mmol) in Et2O (3 ml) were added BSP (8.2 mg, 0.036 mmol), 2,6-di-tert-butylpyridine (16.0 μl, 0.072 mmol) and 5 Å MS at RT. After stirring at −114 °C (liq. N2-EtOH) for 20 min, Tf2O (6.0 μl, 0.036 mmol) was added to the mixture. The mixture was stirred at −114 °C for 1 h, and was then warmed to RT and filtered. The filtrate was washed with a saturated aqueous NaHCO3 solution and brine, respectively, and was then dried over Na2SO4 and concentrated. The residue was purified by flash chromatography on silica gel (petroleum ether/EtOAc=5:1) to afford 37 (11.3 mg, 64%) and the five-membered orthoester 38 (3.0 mg, 18%) as colourless syrups.

Synthesis of FABO disaccharide trifluoroacetimidate 6

To a solution of p-methoxyphenyl glycoside 37 (36 mg, 0.049 mmol) in CH3CN/H2O (3 ml/3 ml) was added Ag(DPAH)2 (79 mg, 0.17 mmol) at 0 °C. After stirring for 30 min at this temperature, the mixture was filtered. The filtrate was diluted with CH2Cl2, washed with saturated NaHCO3 solution and brine, respectively, and was then dried over Na2SO4 and concentrated. The residue was purified by flash chromatography (petroleum ether/EtOAc=3:1) to yield the corresponding hemiacetal (28 mg, 91%) as a colourless syrup. To a solution of the hemiacetal (29 mg, 0.046 mmol) in CH2Cl2 (3 ml) were added Cs2CO3 (75 mg, 0.23 mmol) and N-phenyl-2,2,2-trifluoroacetimidoyl chloride (14 μl, 0.14 mmol) at RT. After stirring for 3 h, the mixture was filtered. The filtrate was evaporated in vacuo to give a residue, which was subjected to chromatography on Davisil silica (pH=7.0, petroleum ether/EtOAc, 5:1) to give 6 (33 mg, 90%) as a colourless syrup. This compound was used directly without further characterization.

Synthesis of pregnane β-disaccharide 39

To a solution of imidate 6 (33.0 mg, 0.041 mmol) and pregnane diol 7 (15.6 mg, 0.035 mmol) in CH2Cl2 (3 ml) was added 5 Å MS at RT. After stirring at −78 °C for 30 min, TBSOTf (1.2 μl, 0.0052, mmol) was added to the mixture. After stirring for 6 h at this temperature, Et3N was added to quench the reaction. The resulting mixture was filtered. The filtrate was evaporated in vacuo to give a residue, which was purified by flash chromatography (petroleum ether/CH2Cl2/EtOAc=10:5:1) to afford 39 (27.6 mg, 75%) and its α-anomer (4.5 mg, 12%) as white solids.

Synthesis of pregnane disaccharide 3

To a solution of 39 (21.0 mg, 0.020 mmol) in toluene (2 ml) were added Bu3SnH (32 μl, 0.12 mmol) and Et3B (12 μl, 0.012 mmol) at 0 °C. After stirring for 1 h at RT, the mixture was concentrated in vacuo. The residue was purified by flash chromatography (petroleum ether/EtOAc=5:1) to afford the corresponding 2′,6′′-deoxy derivative (16.5 mg, 97%) as a white solid (see Supplementary Methods). To a solution of this compound (16.5 mg, 0.019 mmol) in CH2Cl2/MeOH (1.5 ml/1.5 ml) was added NaOMe (20 mg, 0.37 mmol) at RT. After stirring for 40 h, the mixture was filtered through silica gel. The filtrate was evaporated in vacuo to give a residue, which was purified by flash chromatography (petroleum ether/EtOAc=2:1) to afford 3 (14.0 mg, 97%) as a white solid.

Synthesis of pregnane hexasaccharide 40

To a solution of tetrasaccharide ortho-cyclopropylethynylbenzoate 2 (22.3 mg, 0.025 mmol), pregnane disaccharide 3 (8.0 mg, 0.011 mmol) and 2,4,6-tri-tert-butylpyrimidine (TTBP) (4.0 mg, 0.016 mmol) in CH2Cl2 (2 ml) was added 4 Å MS at RT. After stirring for 30 min at −20 °C, a solution of PPh3AuOTf in CH2Cl2 (0.05 ml, 0.1 M) was added to the mixture. The mixture was stirred for 2 h while warming to −10 °C, then another portion of PPh3AuOTf in CH2Cl2 (0.05 ml, 0.1 M) was added to the mixture. After stirring for 4 h at −10 °C, Et3N was added to quench the reaction. The resulting mixture was filtered and concentrated. The residue was purified by flash chromatography (petroleum ether/CH2Cl2/EtOAc=1:1:1) to afford 40 (8.3 mg, 53%), its α-anomer (4.2 mg, 27%) as white foams, and recovered 3 (1.0 mg, 13%).

Synthesis of Periploside A 1

To a solution of 40 (4.7 mg, 3.2 μmol) in pyridine/EtOH (1.0 ml/1.0 ml) was added thiourea (10 mg, 0.13 mmol) at RT. After stirring for 2 h at 80 °C, the mixture was concentrated in vacuo to give a residue, which was purified by flash chromatography (CHCl3/MeOH=30:1) to afford a colourless syrup. The syrup was dissolved in THF/pyridine (1.5 ml/0.75 ml). HF-py (70% HF in pyridine, 0.10 ml) was added dropwise at 0 °C. After stirring for 40 h at RT, a saturated NaHCO3 solution was added slowly to the mixture at RT. The resulting mixture was diluted with CH2Cl2, washed with saturated NaHCO3 solution and was then extracted with CH2Cl2 twice. The combined organic layer was washed with brine, dried over Na2SO4 and concentrated. The residue was purified by flash chromatography (CHCl3/MeOH=30:1) to afford periploside A (1) (3.8 mg, 93%) as a white foam.

Author contributions

X.Z. and B.Y. conceived the synthetic route. X.Z. conducted the synthetic work. Y.Z. and J.Z. conducted bioassay. B.Y. and X.Z. wrote the manuscript.

Additional information

How to cite this article: Zhang, X. et al. Total synthesis of periploside A, a unique pregnane hexasaccharide with potent immunosuppressive effects. Nat. Commun. 6:5879 doi: 10.1038/ncomms6879 (2015).

Supplementary Material

Supplementary Information

Supplementary Figures 1-63, Supplementary Tables 1-3, Supplementary Methods and Supplementary References

ncomms6879-s1.pdf (6.6MB, pdf)

Acknowledgments

This work is financially supported by the National Natural Science Foundation of China (21432012 and 91213301), the Ministry of Sciences and Technology of China (2012ZX09502-002) and the E-Institute of Shanghai Municipal Education Commission (E09013). We are grateful to Professor Wei-Min Zhao for providing an authentic sample of the natural product periploside A and to Professor Tian-Xiang Li for providing a photo of the plant.

References

  1. Oshima Y., Hirota T. & Hikino H. Periplosides A, B and C, steroidal glycosides of Periploca sepium root barks. Heterocycles 26, 2093–2098 (1987). [Google Scholar]
  2. Itokawa H. et al. Studies on chemical constituents of antitumor fraction from Periploca sepium. II. Structures of new pregnane glycosides, periplocosides A, B and C. Chem. Pharm. Bull. 36, 982–987 (1988). [DOI] [PubMed] [Google Scholar]
  3. Itokawa H. et al. Studies on chemical constituents of antitumor fraction from Periploca sepium. IV. Structures of new pregnane glycosides, periplocosides D, E, L and M. Chem. Pharm. Bull. 36, 2084–2089 (1988). [DOI] [PubMed] [Google Scholar]
  4. Itokawa H. et al. Studies on chemical constituents of antitumor fraction from Periploca sepium. V. Structures of new pregnane glycosides, periplocosides J, K, F and O. Chem. Pharm. Bull. 36, 4441–4446 (1988). [DOI] [PubMed] [Google Scholar]
  5. Feng J. Q. et al. Immunosuppressive pregnane glycosides from Periploca sepium and Periploca forrestii. Phytochemistry 69, 2716–2723 (2008). [DOI] [PubMed] [Google Scholar]
  6. Wang L.-Y. et al. Structural revision of periplocosides and periperoxides, natural immunosuppressive agents from the genus Periploca. Phytochemistry 72, 2230–2236 (2011). [DOI] [PubMed] [Google Scholar]
  7. Wang L.-Y. et al. Corrigendum to “Structural revision of periplocosides and periperoxides, natural immunosuppressive agents from the genus Periploca”. Phytochemistry 95, 445 (2013). [DOI] [PubMed] [Google Scholar]
  8. Zhu Y.-N. et al. Periplocoside E, an effective compound from Periploca sepium Bge, inhibited T cell proliferation in vitro and in vivo. J. Pharmacol. Exp. Ther. 316, 662–669 (2006). [DOI] [PubMed] [Google Scholar]
  9. Zhu Y.-N. et al. Periplocoside E inhibits experimental allergic encephalomyelitis by suppressing IL-12-dependent CCR5 expression and IFN-γ-dependent CXCR3 expression in T lymphocytes. J. Pharmacol. Exp. Ther. 318, 1153–1162 (2006). [DOI] [PubMed] [Google Scholar]
  10. Zhao W. et al. Use of periplocoside A and periplocoside E for preparing immunosuppressants used for preventing and treating autoimmune diseases such as rheumatoid arthritis, autoimmune hepatitis and insulin-dependent diabetes. WO2007036113-A1; CN1939324-A; CN1939324-B.
  11. Jiangsu New Medical College. Dictionary of Chinese Herb Medicines 1683 and 2388A (Shanghai Scientific and Technologic Press (1998). [Google Scholar]
  12. Mann J. Natural products as immunosuppressive agents. Nat. Prod. Rep. 18, 417–430 (2001). [DOI] [PubMed] [Google Scholar]
  13. Yu B., Sun J. & Yang X. Assembly of naturally occurring glycosides, evolved tactics, and glycosylation methods. Acc. Chem. Res. 45, 1227–1236 (2012). [DOI] [PubMed] [Google Scholar]
  14. Borovika A. & Nagorny P. Recent advances in the synthesis of natural 2-deoxy-β-glycosides. J. Carbohydr. Chem. 31, 255–283 (2012). [Google Scholar]
  15. Ma Y., Li Z., Shi H., Zhang J. & Yu B. Assembly of digitoxin by gold(I)-catalyzed glycosidation of glycosyl o-alkynylbenzoates. J. Org. Chem. 76, 9748–9756 (2011). [DOI] [PubMed] [Google Scholar]
  16. Zhang J., Shi H., Ma Y. & Yu B. Expeditious synthesis of saponin P57, an appetite suppressant from Hoodia plants. Chem. Commun. 48, 8679–8681 (2012). [DOI] [PubMed] [Google Scholar]
  17. Zhang S., Ma Y., Ma J., Yu B. & Xie X. Molecular matchmaking between the popular ‘weight loss’ herb Hoodia gordonii and GPR119, a potential drug target for metabolic disorders. Proc. Natl Acad. Sci. USA 111, 14571–14576 (2014). [DOI] [PMC free article] [PubMed] [Google Scholar]
  18. Tang Y., Li J., Zhu Y., Li Y. & Yu B. Mechanistic insights into the gold(I)-catalyzed activation of glycosyl ortho-alkynylbenzoates for glycosidation. J. Am. Chem. Soc. 135, 18396–18405 (2013). [DOI] [PubMed] [Google Scholar]
  19. Yu B. & Sun J. Glycosylation with glycosyl N-phenyltrifluoroacetimidates (PTFAI) and a perspective of the future development of new glycosylation methods. Chem. Commun. 46, 4668–4679 (2010). [DOI] [PubMed] [Google Scholar]
  20. Roush W. R. & Bennett C. E. A highly stereoselective synthesis of 2-deoxy-β-glycosides using 2-deoxy-2-iodo-glucopyranosyl acetate donors. J. Am. Chem. Soc. 121, 3541–3542 (1999). [Google Scholar]
  21. Crich D. & Yang F. Phenylthiomethyl glycosides: convenient synthons for the formation of azidomethyl and glycosylmethyl glycosides and their derivatives. Angew. Chem. Int. Ed. 48, 8896–8899 (2009). [DOI] [PMC free article] [PubMed] [Google Scholar]
  22. Jaurand G., Beau J.-M. & Sinaÿ P. Organoselenium chemistry: stereoselective conversion of glycals into anomeric spiro-orthoesters using a glycosyloxyselenation-oxidation elimination sequence. J. Chem. Soc. Chem. Commun. 701–703 (1982). [Google Scholar]
  23. Nicolaou K. C. et al. Total synthesis of everninomicin 13,384-1-part 2: synthesis of the FGHA2 fragment. Angew. Chem. Int. Ed. 38, 3340–3345 (1999). [DOI] [PubMed] [Google Scholar]
  24. Nicolaou K. C. et al. 1,2-Seleno migrations in carbohydrate chemistry: solution and solid-phase synthesis of 2-deoxy glycosides, orthoesters, and allyl orthoesters. Angew. Chem. Int. Ed. 39, 1089–1093 (2000). [DOI] [PubMed] [Google Scholar]
  25. Zhou M. & O’Doherty G. A. A stereoselective synthesis of digitoxin and digitoxigen mono- and bisdigitoxoside from digitoxigenin via a palladium-catalyzed glycosylation. Org. Lett. 8, 4339–4342 (2006). [DOI] [PMC free article] [PubMed] [Google Scholar]
  26. Kadota I. & Yamamoto Y. Stereocontrolled total synthesis of hemibrevetoxin B. J. Org. Chem. 63, 6597–6606 (1998). [Google Scholar]
  27. Tang Y. & Yu B. Identification of (phosphine)gold(I) hydrates and their equilibria in wet solutions. RSC Adv. 2, 12686–12689 (2012). [Google Scholar]
  28. Noshita T., Sugiyama T., Kitazumi Y. & Oritani T. Phenolic Ferrier reaction and its application to the natural product synthesis. Tetrahedron Lett. 35, 8259–8262 (1994). [Google Scholar]
  29. Horito S., Asano K., Umemura K., Hashimoto H. & Yoshimura J. A new synthesis of 2,3,4,6-tetra-O-benzyl-D-glucopyranosylidene acetals, using trimethylsilyl trifluoromethanesulfonate as the catalyst. Carbohydr. Res. 121, 175–185 (1983). [Google Scholar]
  30. Ohtake H., Ichiba N. & Ikegami S. Synthesis and structure of 4-O,6-O-glycosylidene glycosides. J. Org. Chem. 65, 8164–8170 (2000). [DOI] [PubMed] [Google Scholar]
  31. Durham T. B., Blanchard N., Savall B. M., Powell N. A. & Roush W. R. Total synthesis of formamicin. J. Am. Chem. Soc. 126, 9307–9317 (2004). [DOI] [PubMed] [Google Scholar]
  32. Praly J.-P. & Descotes G. Photocyclisation d’hydroxyalkyl glycosides en orthoesters glycosidiques. Tetrahedron Lett. 23, 849–852 (1982). [Google Scholar]
  33. Martín A., Pérez-Martín I., Quintanal L. M. & Suárez E. Intramolecular 1,8- versus 1,6-hydrogen atom transfer between pyranose units in α (1→4)-disaccharide model promoted by alkoxyl radicals. Conformational and stereochemical requirements. Org. Lett. 9, 1785–1788 (2007). [DOI] [PubMed] [Google Scholar]
  34. Nicolaou K. C. et al. Total synthesis of apoptolidin: construction of enantiomerically pure fragments. J. Am. Chem. Soc. 125, 15433–15442 (2003). [DOI] [PubMed] [Google Scholar]
  35. Lian G., Zhang X. & Yu B. Thioglycosides in carbohydrate research. Carbohydr. Res. doi: 10.1016/j.carres.2014.06.009 (in the press). [DOI] [PubMed] [Google Scholar]
  36. Sasaki M. & Tachibana K. An efficient and stereocontrolled synthesis of the nephritogenoside core structure. Tetrahedron Lett. 32, 6873–6876 (1991). [Google Scholar]
  37. Crich D. & Smith M. 1-Benzenesulfinyl piperidine/trifluoromethanesulfonic anhydride: a potent combination of shelf-stable reagents for the low-temperature conversion of thioglycosides to glycosyl triflates and for the formation of diverse glycosidic linkages. J. Am. Chem. Soc. 123, 9015–9020 (2001). [DOI] [PubMed] [Google Scholar]
  38. Fügedi P. & Garegg P. J. A novel promoter for the efficient construction of 1,2-trans linkages in glycoside synthesis, using thioglycosides as glycosyl donors. Carbohydr. Res. 149, C9–C12 (1986). [Google Scholar]
  39. Ishiwata A., Sakurai A., Nishimiya Y., Tsuda S. & Ito Y. Synthetic study and structural analysis of the antifreeze agent xylomannan from Upis ceramboides. J. Am. Chem. Soc. 133, 19524–19535 (2011). [DOI] [PubMed] [Google Scholar]
  40. Konradsson P., Udodong U. E. & Fraser-Reid B. Iodonium promoted reactions of disarmed thioglycosides. Tetrahedron Lett. 31, 4313–4316 (1990). [Google Scholar]
  41. Schmidt R. R. & Toepfer A. Glycosylation with highly reactive glycosyl donors: efficiency of the inverse procedure. Tetrahedron Lett. 32, 3353–3356 (1991). [Google Scholar]
  42. Yang M. T. & Woerpel K. A. The effect of electrostatic interactions on conformational equilibria of multiply substituted tetrahydropyran oxocarbenium ions. J. Org. Chem. 74, 545–553 (2009). [DOI] [PMC free article] [PubMed] [Google Scholar]
  43. Chamberland S., Ziller J. W. & Woerpel K. A. Structural evidence that alkoxy substituents adopt electronically preferred pseudoaxial orientations in six-membered ring dioxocarbenium ions. J. Am. Chem. Soc. 127, 5322–5323 (2005). [DOI] [PubMed] [Google Scholar]
  44. Miura K. et al. Triethylborane-induced hydrodehalogenation of organic halides by tin hydrides. Bull. Chem. Soc. Jpn 62, 143–147 (1989). [Google Scholar]
  45. Zhu Y. & Yu B. Characterization of the isochromen-4-yl-gold(I) intermediate in the gold(I)-catalyzed glycosidation of glycosyl ortho-alkynylbenzoates and enhancement of the catalytic efficiency thereof. Angew. Chem. Int. Ed. 50, 8329–8332 (2011). [DOI] [PubMed] [Google Scholar]
  46. Nie S., Li W. & Yu B. Total synthesis of nucleoside antibiotic A201A. J. Am. Chem. Soc. 136, 4157–4160 (2014). [DOI] [PubMed] [Google Scholar]
  47. Cook A. F. & Maichuk D. T. Use of chloroacetic anhydride for the protection of nucleoside hydroxyl groups. J. Org. Chem. 35, 1940–1943 (1970). [DOI] [PubMed] [Google Scholar]
  48. Adam W. & Wang X. E/Z Isomerization, solvolysis, addition, and cycloaddition reactions of (E)-tert-butylketene methyl tert-butyldimethylsilyl acetal. J. Org. Chem. 56, 7244–7250 (1991). [Google Scholar]
  49. Sawada D. & Ito Y. A new method for formacetal linkage formation: protection of alcohols, phenols and carboxylic acids. Tetrahedron Lett. 42, 2501–2504 (2001). [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

Supplementary Information

Supplementary Figures 1-63, Supplementary Tables 1-3, Supplementary Methods and Supplementary References

ncomms6879-s1.pdf (6.6MB, pdf)

Articles from Nature Communications are provided here courtesy of Nature Publishing Group

RESOURCES