Molecular cloning and expression analysis of WRKY transcription factor genes in Salvia miltiorrhiza

Abstract

Background

WRKY proteins comprise a large family of transcription factors and play important regulatory roles in plant development and defense response. The WRKY gene family in Salvia miltiorrhiza has not been characterized.

Results

A total of 61 SmWRKYs were cloned from S. miltiorrhiza. Multiple sequence alignment showed that SmWRKYs could be classified into 3 groups and 8 subgroups. Sequence features, the WRKY domain and other motifs of SmWRKYs are largely conserved with Arabidopsis AtWRKYs. Each group of WRKY domains contains characteristic conserved sequences, and group-specific motifs might attribute to functional divergence of WRKYs. A total of 17 pairs of orthologous SmWRKY and AtWRKY genes and 21 pairs of paralogous SmWRKY genes were identified. Maximum likelihood analysis showed that SmWRKYs had undergone strong selective pressure for adaptive evolution. Functional divergence analysis suggested that the SmWRKY subgroup genes and many paralogous SmWRKY gene pairs were divergent in functions. Various critical amino acids contributed to functional divergence among subgroups were detected. Of the 61 SmWRKYs, 22, 13, 4 and 1 were predominantly expressed in roots, stems, leaves, and flowers, respectively. The other 21 were mainly expressed in at least two tissues analyzed. In S. miltiorrhiza roots treated with MeJA, significant changes of gene expression were observed for 49 SmWRKYs, of which 26 were up-regulated, 18 were down-regulated, while the other 5 were either up-regulated or down-regulated at different time-points of treatment. Analysis of published RNA-seq data showed that 42 of the 61 identified SmWRKYs were yeast extract and Ag⁺-responsive. Through a systematic analysis, SmWRKYs potentially involved in tanshinone biosynthesis were predicted.

Conclusion

These results provide insights into functional conservation and diversification of SmWRKYs and are useful information for further elucidating SmWRKY functions.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1411-x) contains supplementary material, which is available to authorized users.

Background

Salvia miltiorrhiza Bunge (Lamiaceae), known as danshen in Chinese, is one of the most important Traditional Chinese Medicine (TCM) materials. It has been widely used in Chinese medicines treating coronary heart disease, hepatitis, menstrual disorders, menostasis, blood circulation diseases, and other cardiovascular diseases [1]. The main bioactive components of S. miltiorrhiza include the water-soluble (hydrophilic) phenolics, such as rosmarinic acid, salvianolic acid A, salvianolic acid B and lithospermic acid [2], and the lipid-soluble (nonpolar, lipophilic) diterpenoids, known as tanshinones [3]. Enzymes catalyzing the biosynthesis of these bioactive components have been intensively studied recently [4-10]. A large number of genes involved in the biosynthesis of phenolics and terpenoids have been identified through either molecular cloning or transcriptome-wide characterization [3,11-17]. Collectively, S. miltiorrhiza is being developed to be a medicinal model plant [18].

Transcription factors are a class of significant regulators controlling plant growth and development through regulating gene expression at the transcriptional level. They bind to the specific regions, known as cis-elements, in the promoters of genes and then activate or repress the expression of regulated genes in collaboration with other regulatory factors. So far, two large transcription factor gene families, including the plant-specific SQUAMOSA promoter-binding protein-like (SPL) transcription factor gene family and the largest plant transcription factor gene family, termed MYB, have been characterized in S. miltiorrhiza [19,20]. A total of 15 SmSPLs and 110 SmMYBs have been identified from S. miltiorrhiza. SmSPLs are involved in the regulation of developmental timing in S. miltiorrhiza and eight of them are targets of miR156/157 [19]. Similarly, a subset of SmMYBs is regulated by microRNAs, such as miR159, miR319, miR828 and miR858. Many SmMYBs are involved in the biosynthesis of bioactive compounds in S. miltiorrhiza [20].

WRKY is a large transcription factor gene family specific to the green lineage, including green algae and land plants. The first WRKY gene, known as SPF1, was cloned from Ipomoea batatas about twenty year ago [21]. Since then, great progress has been achieved in WRKY gene identification and functional analysis. Plants with WRKYs identified include green alga (Chlamydomonas reinhardtii) [22], moss (Physcomitrella patens) [22], fern (Ceratopteris richardii) [22], pine (Pinus monticola) [23], Arabidopsis [24], tobacco (Nicotiana tabacum) [25-27], rice (Oryza sativa) [28,29], soybean (Glycine max) [30], maize (Zea mays) [31], barley (Hordeum vulgare) [32], grape (Vitis vinifera) [33,34], poplar (Populus trichocarpa) [35], tomato (Solanum lycopersicum) [36], cucumber (Cucumis sativus) [37], coffee (Coffea arabica) [38], and so forth.

Characterization of the identified WRKY genes showed that they were significant regulators involved in plant developmental processes and responsed to biotic and abiotic stresses [39]. The involvement of WRKYs in plant immune response against bacterial, fungal, and viral pathogens has been widely reported [40-51]. Recently, more and more evidence showed the regulatory roles of WRKY in plant response to abiotic stresses. For example, over-expression of three soybean WRKY genes (GmWRKY13, GmWRKY27 and GmWRKY54) in Arabidopsis showed that GmWRKY21-transgenic Arabidopsis plants were tolerant to cold stress, GmWRKY54 conferred salt and drought tolerance, whereas transgenic plants over-expressing GmWRKY13 had increased sensitivity to salt and mannitol stresses and decreased sensitivity to abscisic acid [52]. It suggests the involvement of WRKY genes in multiple abiotic stress-associated signaling pathways and the association of different WRKY members with different abiotic stresses. Moreover, WRKYs associated with same abiotic stress may show different responses. For instance, Arabidopsis WRKY25 and WRKY26 are heat-induced, whereas WRKY33 is heat-repressed [53]. In addition to stress responses, WRKYs also regulate various developmental processes, such as seed dormancy and germination, flowing, fruit maturation, stem elongation, pith secondary cell wall formation, plant senescence, and trichome development [54-58]. It suggests the importance of WRKYs and the complexity of WRKY-associated regulatory networks.

The defining feature of WRKY transcription factors is their DNA-binding domain, known as WRKY domain [39]. It is approximately 60 amino acids in length and includes the conserved amino acid sequence WRKYGQK at the N-terminus and an atypical zinc-finger motif either C2H2 (C–X_4–5–C–X_22–23–H–X₁–H) or C2HC (C–X₇–C–X₂₃–H–X₁–C) at the C-terminus. The structure of the WRKY domain allows it to specifically interact with W-box and SURE (sugar responsive) cis-elements in the promoter of target genes [59-61]. WRKY can be divided into three groups (Groups I, II and III) based on the number of WRKY domains (two domains in Group I and one in the others) and the pattern of zinc finger motif (C2H2 in Groups I and II and C2HC in Group III) [39,40]. Additionally, Group II WRKY proteins can be further divided into subgroups, including IIa, IIb, IIc, IId and IIe, based on the primary amino acid sequence of the WRKY domain.

Although WRKYs have been identified and characterized in various plant species, no information is available for the WRKY gene family in S. miltiorrhiza. In this study, we cloned and characterized 61 S. miltiorrhiza SmWRKYs.

Results and discussion

Molecular cloning of 61 SmWRKY genes from S. miltiorrhiza

It has been shown that 72 AtWRKY genes exist in the Arabidopsis genome (Additional file 1: Table S1). To identify SmWRKYs, BLAST analysis against the current assembly of the S. miltiorrhiza genome was performed using AtWRKY protein sequences as queries. A total of 61 gene models were predicted for SmWRKYs. The 5’-sequence of many SmWRKYs showed low homology with known plant WRKYs. It might cause errors in computational prediction. To verify the predicted gene models and correct errors of computation, full-length coding sequences (CDSs) of all 61 SmWRKYs were PCR-amplified using the primers listed in Additional file 2: Table S2 and then cloned and sequenced. It resulted in the identification of 61 SmWRKYs, which were named SmWRKY1–SmWRKY61, respectively. The deduced SmWRKY proteins have amino acid numbers from 129 to 706, isoelectric points (pI) from 4.76 to 9.9, and molecular weights (Mw) from 19.9 to 76.2 kDa. All of the 61 cloned CDSs have been submitted to GenBank under the accession numbers shown in Table 1. The number of identified SmWRKYs is comparable with that in Arabidopsis. Comparable gene numbers were also found for the MYB [20], SPL [19], Argonaute (AGO) [62] and RNA-dependent RNA polymerase (RDR) [63] gene families in S. miltiorrhiza and Arabidopsis. It suggests that S. miltiorrhiza and Arabidopsis may have similar number tfmkof gene members for many gene families. Thus, the identified SmWRKYs represent an almost complete set of WRKYs in S. miltiorrhiza, although it may be not a fully complete set.

Table 1.

Sequence features of WRKYs in S. miltiorrhiza

Name	Gene ID	AA Len	pI	Mw (Da)	Group	Conserved motif	Domain pattern	Zinc finger
SmWRKY1	KM823124	486	5.79	52075.53	2b	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY2	KM823125	526	7.2	57916.44	1	2×[WRKYGQK]	C-X4-C-X22-HXH	C2H2
SmWRKY3	KM823126	295	9.84	31785.84	2d	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY4	KM823127	292	7.05	32163.19	2c	WRKYGQK	C-X4-C-X23-HXH	C2H2
SmWRKY5	KM823128	283	6.6	31674.21	2e	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY6	KM823129	332	9.6	36424.23	2d	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY7	KM823130	262	6.18	29689.04	3	WRKYGQK	C-X7-C-X23-HXC	C2HC
SmWRKY8	KM823131	300	5.18	33675.01	2e	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY9	KM823132	269	8.91	29956.66	2a	WRKYGQK	C-X5-C-X23-HNH	C2H2
SmWRKY10	KM823133	343	5.37	38240.49	3	WRKYGQK	C-X7-C-X23-HXC	C2HC
SmWRKY11	KM823134	349	5.34	39120.3	3	WRKYGQK	C-X7-C-X23-HXC	C2HC
SmWRKY12	KM823135	211	8.11	24263.86	2c	WRKYGQK	C-X4-C-X23-HXH	C2H2
SmWRKY13	KM823136	435	5.7	47512.82	1	2×[WRKYGQK]	C-X4-C-X22-HXH	C2H2
SmWRKY14	KM823137	243	8.19	27565.82	2c	WRKYGKK	C-X4-C-X23-HXH	C2H2
SmWRKY15	KM823138	549	6.39	59091.35	2b	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY16	KM823139	321	5.02	35934.8	3	WRKYGQK	C-X7-C-X23-HXC	C2HC
SmWRKY17	KM823140	157	9.46	18126.30	2c	WRKYGQK	C-X4-C-X23-HXH	C2H2
SmWRKY18	KM823141	333	4.76	36599.98	2e	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY19	KM823142	221	9	25422.86	2c	WRKYGQK	C-X4-C-X23-HXH	C2H2
SmWRKY20	KM823143	328	9.56	35953	2d	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY21	KM823144	309	6.18	34870.74	2c	WRKYGQK	C-X4-C-X23-HXH	C2H2
SmWRKY22	KM823145	407	8.72	44553.66	2b	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY23	KM823146	341	9.61	37956.92	2d	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY24	KM823147	364	7.66	40559.08	1	2×[WRKYGQK]	C-X4-C-X22-HXH	C2H2
SmWRKY25	KM823148	329	5.9	36268.73	2c	WRKYGQK	C-X4-C-X23-HXH	C2H2
SmWRKY26	KM823149	445	6.33	49392.18	2b	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY27	KM823150	346	9.77	37310.40	2d	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY28	KM823151	486	8.38	53222.94	--	2×[WRKYGQK]	C-X4-C-X22-HXH	C2H2
SmWRKY29	KM823152	519	6.13	63235.29	2b	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY30	KM823153	509	6.84	55355.55	2b	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY31	KM823154	516	8.6	55885.41	1	2×[WRKYGQK]	C-X4-C-X22-HXH	C2H2
SmWRKY32	KM823155	129	9.3	15217.26	2c	WRKYGQK	C-X4-C-X23-HXH	C2H2
SmWRKY33	KM823156	175	9.36	19944.38	2c	WRKYGQK	C-X4-C-X23-HXH	C2H2
SmWRKY34	KM823157	309	8.11	34006.08	2a	WRKYGQK	C-X5-C-X23-HNH	C2H2
SmWRKY35	KM823158	508	6.12	55526.63	2b	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY36	KM823159	246	6.61	27210.05	2c	WRKYGQK	C-X4-C-X23-HXH	C2H2
SmWRKY37	KM823160	290	6.6	32766.16	2c	WRKYGQK	C-X4-C-X23-HXH	C2H2
SmWRKY38	KM823161	284	9.41	30581.63	2d	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY39	KM823162	390	6.64	43510.55	1	2×[WRKYGQK]	C-X4-C-X22-HXH	C2H2
SmWRKY40	KM823163	352	6.07	38849.51	2e	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY41	KM823164	587	9.12	64687.26	1	2×[WRKYGQK]	C-X4-C-X22-HXH	C2H2
SmWRKY42	KM823165	706	6.02	76197.45	1	2×[WRKYGQK]	C-X4-C-X22-HXH	C2H2
SmWRKY43	KM823166	179	5.39	19963.09	2c	WRKYGKK	C-X4-C-X23-HXH	C2H2
SmWRKY44	KM823167	265	5.73	28206.05	2c	WRKYGQK	C-X4-C-X23-HXH	C2H2
SmWRKY45	KM823168	336	5.95	37211.08	3	WRKYGQK	C-X7-C-X23-HXC	C2HC
SmWRKY46	KM823169	306	6.41	33426.96	2e	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY47	KM823170	268	5.86	30225.72	2c	WRKYGQK	C-X4-C-X23-HXH	C2H2
SmWRKY48	KM823171	224	5.88	25174.62	2e	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY49	KM823172	351	9.9	39451.59	2d	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY50	KM823173	291	5.45	33184.06	2e	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY51	KM823174	526	7.2	57916.44	1	2×[WRKYGQK]	C-X4-C-X22-HXH	C2H2
SmWRKY52	KM823175	171	6.66	19066.92	2c	WRKYGQK	C-X4-C-X23-HXH	C2H2
SmWRKY53	KM823176	575	6.54	62764.4	1	2×[WRKYGQK]	C-X4-C-X22-HXH	C2H2
SmWRKY54	KM823177	491	7.69	53504.9	1	2×[WRKYGQK]	C-X4-C-X22-HXH	C2H2
SmWRKY55	KM823178	449	9.12	49222.93	1	2×[WRKYGQK]	C-X4-C-X22-HXH	C2H2
SmWRKY56	KM823179	297	5.34	33782.19	2e	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY57	KM823180	281	5.18	31675.83	2c	WRKYGQK	C-X4-C-X23-HXH	C2H2
SmWRKY58	KM823181	272	6.32	30091.63	2a	WRKYGQK	C-X5-C-X23-HNH	C2H2
SmWRKY59	KM823182	352	8.34	38285.97	2b	WRKYGQK	C-X5-C-X23-HXH	C2H2
SmWRKY60	KM823183	379	7.63	42242.82	1	2×[WRKYGQK]	C-X4-C-X22-HXH	C2H2
SmWRKY61	KM823184	168	8.96	19153.70	3	WRKYGQK	C-X7-C-X23-HXC	C2HC

Classification of the WRKY domains and the WRKY proteins

Transcription factors in a family usually share highly conserved DNA-binding domains. In order to examine the phylogenetic relationships among WRKYs, a neighbor-joining (NJ) phylogenetic tree was constructed for the WRKY domain sequences of AtWRKYs, SmWRKYs, PpWRKYs, GCMa and FLYWCH using MEGA5.0 (Figure 1). According to the classification of AtWRKYs, the WRKY domains were divided into 3 groups (groups 1, 2 and 3). Group 1 WRKY domains come from proteins containing two WRKY domains, one of which is located in the N-terminal (NTWD), while the other one is in the C-terminal (CTWD). The exceptions within this group are the domains from AtWRKY10 and PpWRKY13, each of which possesses a single WRKY domain. Group 1 WRKY domains were further divided into two subgroups, termed group 1 N and group 1C, respectively. Based on their characteristics in the phylogenetic tree, group 2 WRKY domains could be classified into 5 subgroups, including groups 2a, 2b, 2c, 2d and 2e. Multiple sequence alignment of the core WRKY domains, each of which contains approximately 60 residues, showed that 71 of the 74 WRKY domains from 61 SmWRKYs contained the highly conserved sequence WRKYGQK, while the other three (SmWRKY43, SmWRKY52, and SmWRKY61) had WRKYGKK (Figure 2). Of the 61 SmWRKY, 13 are two-WRKY-domain-containing proteins and all of them have the C2H2-type zinc-finger motif (C–X₄–C–X_22–23–H–X₁–H) (Figure 2, Table 2). The other 48 SmWRKY proteins are one-WRKY-domain-containing proteins, 42 of which contain group 2 WRKY domains and have the same type of finger motif (C–X_4–5–C_23–24–H–X₁–H), while the other 6 contain group 3 WRKY domains and have the C2HC zinc finger motif (C–X₇–C₂₃–H–X₁–C) (Figure 2, Table 2). The distribution of residues in the WRKY domains of S. miltiorrhiza WRKY proteins is quite similar to that of Arabidopsis (Figures 2 and 3), suggesting evolutionary conservation of SmWRKYs and AtWRKYs. Comparing the number of SmWRKYs and AtWRKYs in each group/subgroup showed that the number of SmWRKYs in groups 1 and 2 is similar to that of AtWRKYs in the same group; however the number 6 of SmWRKY members belonging to group 3 is significantly less than the number 14 of AtWRKY members included in the same group. It is consistent with previous results showing group 3 WRKYs to be a newly defined and most dynamic group [22] and suggests the divergence of WRKYs in S. miltiorrhiza and Arabidopsis.

Figure 1.

Phylogenetic tree of the WRKY domain from SmWRKYs (red), AtWRKYs (blue). PpWRKYs (dark green), FLYWCH (pink) and GCMa (light green). Groups/subgroups are shown; ‘N’ and ‘C’ indicate the N-terminal and C-terminal WRKY domain of a specific WRKY protein.

Figure 2.

Multiple sequence alignment of the WRKY domain from SmWRKYs. Red box indicates conserved WRKY amino acid signature and zinc-finger motif; Black box indicates conserved amino acids. ‘N’ and ‘C’ indicate the N-terminal and C-terminal WRKY domain of a specific WRKY protein.

Table 2.

Number of WRKY domains from S. miltiorrhiza and Arabidopsis

Group	Subgroup	Gene number				Consensus	Exception
		AtWRKY		SmWRKY
1	1 N	27	13	26	13	C-X4-C-X22-HXH	n = 23, AtWRKY26
	1C		14		13	C-X4-C-X23-HXH
2	2a	44	3	42	3	C-X5-C-X23-HNH
	2b		8		8	C-X5-C-X23-HXH	n = 24, AtWRKY36
	2c		18		16	C-X4-C-X23-HXH
	2d		7		7	C-X5-C-X23-HXH
	2e		8		8	C-X5-C-X23-HXH
3		14	14	6	6	C-X7-C-X23-HXC	n = 22, m = 5, SmWRKY61
							AtWRKY52: HNH for HXC
Total		85		74

Figure 3.

Multiple sequence alignment of the WRKY domain from AtWRKYs. Red box indicates conserved WRKY amino acid signature and zinc-finger motif; Black box indicates conserved amino acids. ‘N’ and ‘C’ indicate the N-terminal and C-terminal WRKY domain of a specific WRKY protein.

In order to investigate whether the phylogenies are different between the WRKY domains and the corresponding WRKY proteins, we constructed an NJ tree based on the full-length amino acid sequences of SmWRKYs, AtWRKYs, PpWRKYs, GCMa and FLYWCH (Figure 4). The results showed that the phylogenetic tree of WRKY proteins was quite similar to the tree of WRKY domains with little difference observed (Figures 1 and 4). For instance, AtWRKY1, AtWRKY32 and SmWRKY28 having two WRKY domains and AtWRKY10 belonging to group 1 WRKY domains form separated clades outside group 1. AtWRKY19 and FLYWCH with the WRKY domain belonging to group 1, AtWRKY16 with the WRKY domain belonging to group 2e, and AtWRKY52 and GCMa with the WRKY domain belonging to group 3 form separated clades outside groups 1, 2 and 3. These results indicate the difference between the WRKY domain and the sequence outside the WRKY domain. Based on the NJ tree constructed with full-length amino acid sequences, we identified 17 pairs of orthologous WRKY genes in S. miltiorrhiza and Arabidopsis (Table 3). It suggests that many SmWRKYs and AtWRKYs are evolutionarily conserved.

Figure 4.

Phylogenetic analysis of SmWRKYs (red), AtWRKYs (blue). PpWRKYs (dark green), FLYWCH (light green) and GCMa (pink) proteins. The unrooted phylogenetic tree was constructed using the neighbor-joining method. The names of WRKY proteins not included in a group are shown.

Table 3.

WRKY orthologs in S. miltiorrhiza and Arabidopsis

SmWRKYs	Putative Arabidopsis orthologs	Phylogenetic group in the NJ tree
SmWRKY55	AtWRKY44	Group 1
SmWRKY54	AtWRKY3/AtWRKY4	Group 1
SmWRKY53	AtWRKY20	Group 1
SmWRKY51/SmWRKY2	AtWRKY33	Group 1
SmWRKY28	AtWRKY32	Out of group 1
SmWRKY34/SmWRKY58	AtWRKY40	Group 2a
SmWRKY59	AtWRKY72	Group 2b
SmWRKY57	AtWRKY23	Group 2c
SmWRKY12	AtWRKY12	Group 2c
SmWRKY19	AtWRKY13	Group 2c
SmWRKY47	AtWRKY49	Group 2c
SmWRKY49	AtWRKY39	Group 2d
SmWRKY56	AtWRKY29	Group 2e
SmWRKY40	AtWRKY35/AtWRKY14	Group 2e
SmWRKY8	AtWRKY27	Group 2e
SmWRKY45	AtWRKY55	Group 3
SmWRKY16	AtWRKY30	Group 3

Analysis of conserved motifs

In addition to the WRKY domain, other conserved motifs could be important for the diversified functions of WRKY proteins from S. miltiorrhiza and Arabidopsis [64,65]. Using the MEME program, we identified a total of 20 conserved motifs in WRKYs from S. miltiorrhiza and Arabidopsis (Figure 5). The length of motifs varies from 8 to 150 amino acids and the number of motifs in each WRKY varies between 2 and 11. The majority of the identified motifs were found in more than one subgroup of WRKYs. Many AtWRKYs in a subgroup contain the same motif(s) as their SmWRKYs orthologues in the subgroup. It suggests the conservation of motifs in S. miltiorrhiza and Arabidoopsis WRKYs belonging to a subgroup.

Figure 5.

Architecture of conserved protein motifs in SmWRKYs and AtWRKYs. A: Architecture of conserved protein motifs in SmWRKYs and AtWRKYs from different groups (or subgroups). Motifs represented with boxes are predicted using MEME. The number in boxes (1–20) represents motif 1–motif 20, respectively. Box size indicates the length of motifs; B: Sequence logo of eleven conserved motifs, including motif 7, motif 9–motif 12, motif 14–motif 18 and motif 20. The logos were created on the WebLogo server (http://weblogo.berkeley.edu/logo.cgi). Bits represent the conservation of sequence at a position.

Among the 20 conserved motifs, 9 motifs, including motifs 1, 2, 3, 4, 5, 6, 8, 13, and 19, are located in the WRKY domain, while the other 11 are located outside the domain. Most WRKY proteins in a group have similar motif compositions (Figure 5). For instance, motif 18 exists in almost all of group 1 WRKY proteins except for SmWRKY55. Motif 14 exists in 16 of the 21 group 1 S. miltiorrhiza and Arabidopsis WRKY proteins. Motifs 9 and 10 commonly exist in groups 2a and 2b, two close subgroups in the phylogenetic tree. Motifs 12, 16 and 17 exist in most WRKY proteins of group 2b but only in a few members of 2a. Motif 7 exists in all of the WRKY proteins belonging to group 2c. Motif 11 is shared by proteins belonging to groups 2d and 2e. Additionally, motif 15, known as the Ca²⁺-dependent CaM-binding domain (CaMBD) [66], commonly exists in most WRKY proteins belonging to groups 2d and 3. Group 2d WRKY proteins usually contain two motif 15 s, while the majority of group 3 proteins contain only one. Motif 20, known as the HARF motif [40,67], exists in 5 of 7 AtWRKYs and all 7 SmWRKYs in group 2d. The results indicate functional similarities of WRKY proteins belonging to a group. Group-specific motifs may attribute to functional divergence of WRKYs.

Selective constraints on SmWRKY genes

In order to preliminarily examine the evolutionary mechanism of WRKYs, we test the hypothesis of positive selection acting on SmWRKY genes using site models and branch-site models in PAML [68] developed by Nielsen and Yang [69] and Yang et al. [70]. Codon substitution models [71] M0, M1a, M2a, M3, M7 and M8 were applied to the alignments and these models assume variation in ω among sites. The parameter estimates, log-likelihood and the LRT tests for these models are shown in Table 4. To examine how dN/dS ratios differed among codon positions, we compared models M0 and M3. The log likelihood of M0 for SmWRKY sequences was l = −5119.032, with an estimate of ω = 0.038. The low ω value suggests a strong action of purifying selection in the evolution of SmWRKY analyzed. M3 (discrete) assumes a general discrete distribution with three site classes (p₀, p₁, p₂). The log likelihood of M3 was l = −4864.540, with an estimate of ω₀ = 0.00052, ω₁ = 0.02439, ω₂ = 0.08755 (Table 4). Consistent with M0, the data from M3 also suggest that all codons are under purifying selection. Additionally, the value of twice the log likelihood difference (2ΔlnL) between M3 and M0 is 508.98. It is strongly statistically significant (p < 0.01) and suggests the overall level of selective constraints fluctuated.

Table 4.

Tests for positive selection among codons of WRKY genes using site models

Model	lnL	Estimates of parameter 1		2ΔlnL	Positive selection sites 2
		Frequency	dN/dS
M0(one-ratio)	−5119.032	p = 1.000	ω = 0.03756	508.984 (M3 vs. M0)**	Not allowed
M3(discrete)	−4864.540	p0 = 0.30493	ω0 = 0.00052		None
		p1 = 0.32215	ω1 = 0.02439
		p2 = 0.37292	ω2 = 0.08755
M1a(nearly neutral)	−5119.251	p0 = 0.93054	ω0 = 0.04576	0 (M2a vs. M1a)	Not allowed
		p1 = 0.06946	ω1 = 1.00000
M2a(positive selection)	−5119.251	p0 = 0.93052	ω0 = 0.04576		None
		p1 = 0.03470	ω1 = 1.00000
		p2 = 0.03478	ω2 = 1.00000
M7(beta)	−4857.207	p = 0.39586		0.002 (M8 vs. M7)	Not allowed
		q = 9.86708
M8(beta & ω)	−4857.206	p0 = 0.99999	ω = 1.35981		None
		p = 0.39661
		p1 = 0.00001
		q = 9.86579

Note: *p < 0.05 and **p < 0.01 (x ² test).

¹ω was estimated under model M0,M3,M7, and M8; p and q are the parameters of the beta distribution.

²The number of amino acid sites estimated to have undergone positive selection.

To test whether positive selection promoted divergence between genes, the codon substitution models that allow positive selection (M2a and M8) and that hypothesize nearly neutral selection (M1a and M7) were compared (M2a vs. M1a and M8 vs. M7; Table 4). The log likelihood of M1a and M2a for SmWRKY sequences was l = −5119.251. However, no site was positively selected at a level of 95%. M7 and M8 fitted the sequences better than M0, M3, M1a and M2a with values of l = −4857.207 and −4857.206, respectively (Table 4). In both cases, no significant evidence of positive selection was found.

Branch-site models aim to detect positive selection affecting a few sites along particular lineages and allow ω ratios to vary among sites and lineages simultaneously [68]. It seems that the branch-site models are most suitable for describing evolutionary processes of the WRKY gene family. Therefore, we analyzed positively selected amino acid sites of SmWRKYs using the improved branch-site model [72]. The branches being tested for positive selection were used as the foreground, while all other branches on the tree were used as the background. The Bayes empirical Bayes (BEB) method was used to calculate the posterior probabilities. A codon is probably from the site class of positive selection if LRT suggested the presence of codons under positive selection on the foreground branch [73]. The parameter estimates for lineages under positive selection are given in Table 5. A total of 19 residues were found to be under positive selection (p > 90%). It includes 6 in group 2c and 10 in group 2d. The other three residues were found in group 2b, group 2e and group 3. No residues in group 1 and group 2a were found to be under positive selection. The results suggest that different WRKY groups may have different evolutionary rates. Groups 2c and 2d could be confronted with strong positive Darwinian selection, since many highly significant positive sites were detected at the 0.01 significance level (Table 5). The evolution in the other groups seems to be more conservative.

Table 5.

Parameters estimation and likelihood ratio tests for the branch-site models

Branch-site model
Foreground branches	Estimates of parameter				Positive delection sites(BEB)
	Site class 0	Site class 1	Site class 2a	Site class 2b
	P0 = 0.10272	P1 = 0.36090	P2a = 0.11884	P2b = 0.41754
Group 1	ω0(b) = 0.05880	ω1(b) = 1.00000	ω2a(b) = 0.05880	ω2b(b) = 1.00000	None
	ω0(f) = 0.05880	ω1(f) = 1.00000	ω2a(f) = 1.00000	ω2b(f) = 1.00000
	P0 = 0.45646	P1 = 0.17985	P2a = 0.26089	P2b = 0.10279
Group 2a	ω0(b) = 0.05165	ω1(b) = 1.00000	ω2a(b) = 0.05165	ω2b(b) = 1.00000	None
	ω0(f) = 0.05165	ω1(f) = 1.00000	ω2a(f) = 1.00000	ω2b(f) = 1.00000
	P0 = 0.42991	P1 = 0.34434	P2a = 0.12535	P2b = 0.10040
Group 2b	ω0(b) = 0.11089	ω1(b) = 1.00000	ω2a(b) = 0.11089	ω2b(b) = 1.00000	359 G*
	ω0(f) = 0.11089	ω1(f) = 1.00000	ω2a(f) = 999.00000	ω2b(f) = 999.00000
	P0 = 0.20480	P1 = 0.56991	P2a = 0.05956	P2b = 0.16573	171 K**, 181 Q**,
Group 2c	ω0(b) = 0.06509	ω1(b) = 1.00000	ω2a(b) = 0.06509	ω2b(b) = 1.00000	192S**, 210 A**,
	ω0(f) = 0.06509	ω1(f) = 1.00000	ω2a(f) = 5.55679	ω2b(f) = 5.55679	237 S**, 243 I**
	P0 = 0.55167	P1 = 0.13832	P2a = 0.24786	P2b = 0.06215	25 N**, 26 I**, 34 C**, 79 S**,
Group 2d	ω0(b) = 0.08684	ω1(b) = 1.00000	ω2a(b) = 0.08684	ω2b(b) = 1.00000	148 T**, 208 G**, 214 D**,
	ω0(f) = 0.08684	ω1(f) = 1.00000	ω2a(f) = 214.85997	ω2b(f) = 214.85997	269 H**, 363 C**, 395 N**
	P0 = 0.27330	P1 = 0.60581	P2a = 0.03758	P2b = 0.08331
Group 2e	ω0(b) = 0.08686	ω1(b) = 1.00000	ω2a(b) = 0.08686	ω2b(b) = 1.00000	196 E*
	ω0(f) = 0.08686	ω1(f) = 1.00000	ω2a(f) = 44.60691	ω2b(f) = 44.60691
	P0 = 0.42970	P1 = 0.32076	P2a = 0.14288	P2b = 0.10666
Group 3	ω0(b) = 0.07702	ω1(b) = 1.00000	ω2a(b) = 0.07702	ω2b(b) = 1.00000	107 F*
	ω0(f) = 0.07702	ω1(f) = 1.00000	ω2a(f) = 999.00000	ω2b(f) = 999.00000

Note: *p < 0.05 and **p < 0.01 (x² test).

Site class: The sites in the sequence evolve according to the same process, the transition probability matrix is calculated only once for all sites for each branch.

b: Background ω.

f: Foreground ω.

Positive delection sites: The number of amino acid sites estimated to have undergone positive selection.

BEB: Bayes Empirical Bayes.

Functional divergence analysis (FDA) of SmWRKY proteins

Using DIVERGE 2.0 that evaluates shifted evolutionary rate and altered amino acid property after gene duplication [74,75], we carried out posterior analysis for estimation of Type-I and Type-II functional divergence between SmWRKY clusters. The estimation was based on the WRKY protein neighbor-joining tree consisting of three major groups (group 1, group 2a–e, and group 3) (Figure 4). Comparison among SmWRKY subgroups showed that all of the coefficients for the type I functional divergence (θ_I) were greater than zero (Additional file 3: Table S3). The θ_I values of eight group pairs, including 1/2e, 1/3, 2a + b/2d, 2a + b/2e, 2a + b/3, 2c/2e, 2c/3 and 2d/3, were ranged from 0.219 to 0.772 and were statistically significant (P < 0.01) (Additional file 3: Table S3). It indicates that significant site-specific changes may have happened at certain amino acid sites between these group pairs, leading to a subgroup-specific functional evolution after their diversification.

Type II functional divergence (θ_II) values in six group pairs, including 1/2c, 1/2d, 2a + b/2d, 2c/2d and 2d/3, were also greater than zero and ranged from 0.017 to 0.234 (Additional file 4: Table S4). It indicates a radical shift in amino acid properties. In order to extensively reduce positive false, Q_k > 0.8 and 1.0 were empirically used as cutoff in the identification of the Type-I and Type-II functional divergence-related residues between gene groups, respectively (Figures 6 and 7). Detailed analysis showed that the number and the distribution of predicted residues for functional divergence in group pairs were different (Additional file 3: Table S3 and Additional file 4: Table S4) and the residues predominantly existed in the WRKY domain. It suggests that these residues probably play important roles in functional divergence of WRKYs during the evolutionary process.

Figure 6.

Site-specific prediction for type-I functional divergence between groups of SmWRKYs. The X-axis represents locations of sites. The Y-axis represents the probability of each group. The red line indicates cutoff = 0.80.

Figure 7.

Site-specific profile for predicting critical amino acid residues responsible for the type-II functional divergence between groups of SmWRKYs. The X-axis represents locations of sites. The Y-axis represents the probability of each group. The red line indicates cutoff = 1.0.

Tissue-specific expression of SmWRKYs

It has been shown that a number of WRKY proteins are involved in plant developmental processes [54,76,77]. In order to preliminarily understand the roles of WRKYs in S. miltiorrhiza development, we analyzed the expression of SmWRKYs in roots, stems, leaves and flowers of S. miltiorrhiza plants. All of the 61 SmWRKYs identified were expressed in at least a tissue analyzed and exhibited differential expression patterns (Figure 8). Of the 61 SmWRKYs, 22 (36.1%) showed predominant expression in roots, 13 (21.3%) in stems, 4 (6.6%) in leaves and 1 (1.6%) in flowers. The other 21 (34.4%) were mainly expressed in at least two tissues analyzed, indicating these genes are likely to play a more ubiquitous role in S. miltiorrhiza. Furthermore, some SmWRKYs in a group shared similar expression patterns, while the others were not. For example, SmWRKY2, SmWRKY24, SmWRKY39, SmWRKY54 and SmWRKY55, belonging to group 1, were predominantly expressed in roots, while the other group 1 members, such as SmWRKY42, SmWRKY13 and SmWRKY60, were mainly expressed in stems, leaves and flowers, respectively (Figure 8). It suggests that SmWRKYs belonging to a group do not necessarily indicate their functions in the same tissues. However, it has been shown that the tissues-specific expression patterns appear to be consistent with their role in the tissues. For example, VvWRKY01, belonging to group 2c, is involved in the regulation of lignin biosynthesis [78]. Over-expression of VvWRKY01 in tobacco resulted in the alteration of expression patterns of genes involved in lignin biosynthesis pathway [78]. Similarly, SmWRKY12, SmWRKY19 and SmWRKY47 in group 2c were predominantly expressed in stems (Figure 8). It indicates the putative roles of these SmWRKYs in the regulation of lignin biosynthesis in S. miltiorrhiza. AtWRKY6, a member of group 2b, and AtWRKY53 and AtWRKY70, two AtWRKYs in group 3, are an important regulator in senescent leaves [55,76,79-81]. Of them, AtWRKY6 acts in the upstream of SIRK during leaf senescence [55]. SmWRKY59 belonging to the same WRKY group of AtWRKY6 and SmWRKY7 included in group 3 could be regulators of leaf senescence in S. miltiorrhiza, since both of them showed predominant expression in leaves (Figure 8). It has been shown that AtWRKY44 included in group 1 is involved in trichome differentiation [54]. Several SmWRKYs in group 1, such as SmWRKY2, SmWRKY39, SmWRKY24, SmWRKY54 and SmWRKY55, were highly expressed in roots with abundant root hairs, and SmWRKY13 belonging to the same group was highly expressed in leaves with abundant of trichomes (Figure 8). It implies that these SmWRKY may be associated with trichome development in S. miltiorrhiza.

Figure 8.

Expression patterns of SmWRKY genes in roots (Rt), stems (St), leaves (Le) and flowers (Fl) of 2-year-old, field-grown S. miltiorrhiza Bunge (line 993). The expression level of SmWRKYs was analyzed by the quantitative RT-PCR method. Y-axis indicates relative expression levels. X-axis indicates different tissues. SmUBQ10 was used as the reference gene. Transcript levels in leaves were arbitrarily set to 1 and the levels in other tissues were given relative to this. Error bars represent standard deviations of mean value from three biological and three technical replicates. ANOVA (analysis of variance) was calculated using SPSS. P < 0.05 was considered statistically significant.

Methyl jasmonate (MeJA)-responsive SmWRKYs

MeJA is a key signaling molecule involved in plant response to stress and in regulating secondary metabolite production in many plant species, including S. miltiorrhiza [3,14]. More than 50% (39 of 74) of AtWRKYs were MeJA-responsive in Arabidopsis [82]. More than 1/3 of CrWRKY were regulated by MeJA in hairy roots of Catharanthus roseus [83]. Additionally, CaWRKY27 in Capsicum annuum [84], GbWRKY1 in Gossypium barbadense [85] and GhWRKY3 in Gossypium hirsutum [86] were also regulated by MeJA. In order to test whether WRKYs were responsive to MeJA treatment in S. miltiorrhiza, the expression level of SmWRKYs in roots of plantlets treated with MeJA was analyzed using the quantitative RT-PCR method. MeJA treatment showed a wide variety of SmWRKY gene expression profiles (Figure 9). Significant expression level changes were observed for 49 SmWRKYs, of which 26 were up-regulated, 18 were down-regulated, while the other 5, including SmWRKY1, SmWRKY15, SmWRKY17, SmWRKY20 and SmWRKY24, were either up-regulated or down-regulated at different time-points of treatment (Figure 9). It suggests that about 80% of the SmWRKYs analyzed are MeJA-responsive. Examination of the number of SmWRKYs with significant expression level changed at different time-points of treatment showed that the expression of 28, 43, 25 and 23 SmWRKYs was changed after MeJA treatment for 12, 24, 36, and 48 hours, respectively (Figure 9). It suggests that the majority of SmWRKYs have altered expression levels at the time-point of 24 h-treatment. The number of up-regulated SmWRKYs was 13, 26, 15, and 13 at the time-point of 12, 24, 36, and 48 hours, respectively, while that of down-regulated was 15, 17, 10, and 10, respectively. Additionally, 8 SmWRKYs, including SmWRKY9, SmWRKY13, SmWRKY14, SmWRKY25, SmWRKY32, SmWRKY38, SmWRKY44 and SmWRKY52, were significantly up-regulated at all time-points of MeJA treatment, while 7, including SmWRKY7, SmWRKY33, SmWRKY47, SmWRKY49, SmWRKY53, SmWRKY54 and SmWRKY58, were down-regulated (Figure 9). It suggests that the number of up-regulated SmWRKYs is slightly more than down-regulated.

Figure 9.

Quantitative RT-PCR analysis of SmWRKY gene expression in S. miltiorrhiza roots treated with MeJA. Fold changes of SmWRKYs in roots of S. miltiorrhiza plantlets treated with MeJA for 12, 24, 36 and 48 h are shown. SmUBQ10 was used as the reference gene. The level of transcripts in roots treated with carrier solution (CK) was arbitrarily set to 1 and the levels in roots treated with MeJA were given relative to this. Mean values and SDs were obtained from three biological and three technical replicates. Y-axis indicates relative expression levels. X-axis indicates different time-points of MeJA treatment. ANOVA (analysis of variance) was calculated using SPSS. P < 0.05 (*) and P < 0.01(**) were considered statistically significant and extremely significant, respectively.

Yeast extract and Ag⁺-responsive SmWRKYs

In order to further investigate the roles of SmWRKYs in S. miltiorrhiza, transcriptome-wide analysis of SmWRKY expression in response to yeast extract and Ag⁺ treatment was performed. RNA-seq data of S. miltiorrhiza hairy roots treated with or without yeast extract (100 μg/ml) and Ag⁺ (30 μM) were downloaded from GenBank under the accession number SRR924662 [12]. RNA-seq reads from non-treated (0 hpi) and treated for 12 h (12 hpi), 24 h (24 hpi) and 36 h (36 hpi) were mapped to SmWRKYs using the SOAP2 software [87]. The log-2-transformed RPKM (RNA-seq reads mapped to a SmWRKY per total million reads from a treatment per kilobases of the SmWRKY length) value of SmWRKYs varied between −3.04 and 8.38 (Additional file 5: Table S5). Using a cutoff of RPKM value >2.0, a total of 49 SmWRKYs were found to be expressed in hairy roots. Fisher’s exact test showed that 42 of the 49 SmWRKYs were differentially expressed (Additional file 5: Table S5). It includes 17 significantly up-regulated, 19 significantly down-regulated and 6 significantly up- or down-regulated at different time-points, suggesting the majority of the identified SmWRKYs were responsive to yeast extract and Ag⁺ treatment.

SmWRKY candidates potentially involved in tanshinone biosynthesis

Terpenoids are plant secondary metabolites with significant physiological and ecological functions and great economic values, and a class of terpenoids, known as tanshinones, is the main bioactive compounds in S. miltiorrhiza. Increasing evidence demonstrates the importance of WRKY genes in the biosynthesis of secondary metabolites, such as terpenoid indole alkaloid in Catharanthus roseus [83]. Additionally, it has been shown that Gossypium arboretum GaWRKY1, which belongs to group 2a, participates in sesquiterpene biosynthesis in cotton by controlling (+)-δ-cadinene synthase (CAD1) activity [88]. PqWRKY1, a member of group 2d, responds to MeJA treatment and is a positive regulator of osmotic stress response and triterpene ginsenoside biosynthesis in Panax quinquefolius [89]. AaWRKY1 and CrWRKY, belonging to group 3, are the other two terpenoid biosynthesis-related WRKYs. Artemisia annua AaWRKY1 was highly expressed in glandular secretory trichomes (GSTs), where the sesquiterpene artemisinin was synthesized [90]. AaWRKY1 might be strongly induced by MeJA and could bind to the W-box in the promoter of ADS gene encoding amorpha-4, 11-diene synthase, a key enzyme in the artemisinin biosynthesis pathway [90]. CrWRKY1 was preferentially expressed in roots of C. roseus and also induced by MeJA [91]. It controlled terpenoid indole alkaloid biosynthesis through positive regulation of DXS and SLS genes involved in the terpenoid pathway and AS and TDC genes involved in the indole pathway [91]. Thus, SmWRKYs included in group 2a, 2d and 3 probably have an evolutionarily conserved role in regulating terpenoid biosynthesis in S. miltiorrhiza.

Terpenoid tanshinones have been mainly produced and accumulated in roots of field-grown S. miltiorrhiza during the fast growing period from June to September [92-94]. The process of tanshinone production may be stimulated by MeJA, yeast extract and Ag⁺ [10,12,95]. Among the 61 identified SmWRKYs, sixteen showed similar responses to the MeJA treatment and the yeast extract and Ag⁺ treatment (Figure 9, Additional file 5: Table S5). SmWRKY2, SmWRKY3, SmWRKY9, SmWRKY11, SmWRKY25, SmWRKY32, SmWRKY37, SmWRKY43 and SmWRKY52 were up-regulated by both the MeJA treatment and the yeast extract and Ag⁺ treatment, while SmWRKY23, SmWRKY26, SmWRKY33, SmWRKY41, SmWRKY47, SmWRKY53 and SmWRKY59 were down-regulated (Figure 9, Additional file 5: Table S5). Among the sixteen SmWRKYs, eight, including six up-regulated (SmWRKY2, SmWRKY3, SmWRKY9, SmWRKY25, SmWRKY37 and SmWRKY52) and two down-regulated (SmWRKY26 and SmWRKY33), were predominantly expressed in roots of field-grown S. miltiorrhiza in August (Figure 8), suggesting their specific roles in roots. SmWRKY2, SmWRKY3, SmWRKY9 and SmWRKY26 are members of groups 1, 2d, 2a and 2b, respectively, while SmWRKY25, SmWRKY33, SmWRKY37 and SmWRKY52 are members of group 2c (Figures 1 and 4). Thus, SmWRKY3 and SmWRKY9 are two SmWRKYs (1) with similar responses to the MeJA treatment and the yeast extract and Ag⁺ treatment, (2) having root-specific expression, and (3) belonging to group 2a, 2d or 3 with members probably playing an evolutionarily conserved role in regulating terpenoid biosynthesis. It implicates that SmWRKY3 and SmWRKY9 are very likely to be activators in tanshinone production. Notably, we may not exclude the possibility that some other SmWRKYs are also involved in tanshinone biosynthesis based on the data currently available. Further analysis of transgenic S. miltiorrhiza plants with over-expressed or silenced SmWRKYs may help to elucidate their function.

Divergence of paralogous SmWRKY genes

Gene duplication is an important event for gene family expansion and functional diversity during evolution [65,96,97]. A total of 42 (68.85% of 61) SmWRKY genes appear to be duplicated (Additional file 5: Table S5). In order to preliminarily reveal the mechanism of functional diversity (nonfunctionalization, subfunctionalization and neofunctionalization [98]) of these genes after duplication, the synonymous (Ks) and non-synonymous (Ka) substitution rate were calculated using the CDS of paralogous SmWRKY genes (Additional file 6: Table S6). The Ka/Ks ratios for all of the 21 paralogous SmWRKY gene pairs were less than one with 5 pairs even close to zero. It suggests that the WRKY genes from S. miltiorrhiza have experienced strong purifying selection pressure. Some closely related gene pairs displayed different expression patterns, indicating functional divergences occurred. For example, SmWRKY13 was expressed dominantly in leaves, whereas the other member of the SmWRKY13/SmWRKY31 gene pair, SmWRKY31, was expressed mainly in roots and stems (Figure 8). In addition, SmWRKY13, but not SmWRKY31, was significantly up-regulated by MeJA (Figure 9). Expression patterns of other paralogous genes, such as SmWRKY23/49, SmWRKY30/35, SmWRKY41/55, SmWRKY42/53, and SmWRKY43/SmWRKY52, were also different (Figures 8 and 9). It indicates that many SmWRKY gene pairs are divergent under the purifying pressure [99].

Conclusions

In this study, we cloned a total of 61 SmWRKY genes. The cloned genes and the deduced proteins were characterized through a comprehensive approach, including phylogenetic tree construction, WRKY domain characterization, conserved motif identification, selective constraint analysis, functional divergence analysis, and expression profiling. We showed that many SmWRKYs and AtWRKYs were evolutionarily conserved. The WRKY domains could be divided into 3 groups (1, 2 and 3) and 8 subgroups (1 N, 1C, 2a, 2b, 2c, 2d, 2e and 3). Each group of WRKY domains contains characteristic conserved sequences. Additionally, sequence outside the WRKY domain might contribute to the difference between the phylogenetic tree constructed with the WRKY domains and that constructed with the whole WRKY proteins. A total of 20 conserved motifs were identified, of which group-specific motifs might attribute to functional divergence of WRKYs. We identified 17 pairs of orthologous SmWRKY and AtWRKY genes and 21 pairs of paralogous SmWRKY genes. Selective constraint analysis and functional divergence analysis showed that the SmWRKY subgroup genes have experienced strong positive selection and diverged in function. Gene expression profiles suggest that the majority of 61 SmWRKY genes are tissue-specific and MeJA- and yeast extract and Ag⁺-responsive. These results provide insights into functional conservation and diversification of SmWRKYs and are useful for further investigating SmWRKY functions in S. miltiorrhiza development and defense response.

Methods

Database search and sequence annotation

The nucleotide sequences and amino acids of 72 AtWRKY genes were obtained from the Arabidopsis Information Resource (TAIR; http://www.Arabidopsis.org/). S. miltiorrhiza WRKY (SmWRKY) genes were predicted by tBLASTn [100] search of AtWRKY [101] homologs against the current S. miltiorrhiza genome assembly, which covers about 92% of the entire genome and 96% of the protein-coding genes [18]. An e-value cut-off of 1e-10 was applied to the homologue recognition. The retrieved sequences were used for gene model prediction on the GENSCAN web server (http://genes.mit.edu/GENSCAN.html). Full-length CDSs of SmWRKYs were amplified by reverse transcription-PCR using the primers listed in Additional file 2: Table S2. PCR products were gel-purified, cloned, and then sequenced. The theoretical isoelectric point (pI) and molecular weight (Mw) were predicted using the Compute pI/Mw tool on the ExPASy server (http://web.expasy.org/compute_pi/) [102].

Multiple sequence alignment, phylogenetic analysis and motif detection

PpWRKY genes were obtained from Physcomitrella patens v3.1 (http://phytozome.jgi.doe.gov/pz/portal.html#!info?alias=Org_Ppatens_er). Human FLYWCH CRAa (EAW85450) and GCMa (BAA13651) were obtained from NCBI (http://www.ncbi.nlm.nih.gov/protein/). Multiple sequence alignment of the WRKY domain from 61 S. miltiorrhiza SmWRKYs and 72 Arabidopsis AtWRKYs was performed using CLUSTALW with BOXSHADE (http://bioweb.pasteur.fr) [103]. Phylogenetic trees were constructed using MEGA 5.0 with the neighbor-joining method [104]. Bootstrap test was replicated 1000 times. Motifs were detected using MEME 5.0 [105].

Plant materials and MeJA treatment

Roots, stems, leaves and flowers from 2-year-old, field-grown S. miltiorrhiza Bunge (line 993) plants were collected in August, 2012 and stored in liquid nitrogen until use. Plantlets cultivated in vitro were grown at 25°C with a photoperiod of 16 h light and 8 h dark for six weeks and treated with 200 μM methyl jasmonate (MeJA) for 12, 24, 36 and 48 h as described previously [3,63]. Plantlets treated with carrier solution were used as controls. Roots of plantlets with or without MeJA treatment were collected and stored in liquid nitrogen until use. Three independent biological replicates were carried out for each experiment.

RNA extraction and quantitative real-time reverse transcription-PCR (qRT-PCR)

Total RNA was extracted from plant tissues using the Quick RNA Isolation Kit (Huayueyang, China). RNA integrity was analyzed on a 1.2% agarose gel. RNA quantity was determined using a NanoDrop 2000C Spectrophotometer (Thermo Scientific, USA). cDNA synthesis was carried out using Superscript III Reverse Transcriptase (TaKaRa, China). qRT-PCRs were performed using the SYBR premix Ex Taq™ kit (TaKaRa, China) and carried out in triplicate for each tissue sample. Gene-specific primers (Additional file 7: Table S7) were designed using Primer Premier 5.0. The length of amplicons is between 80 bp and 250 bp. SmUBQ10 was selected as a reference gene as described previously [3]. Three independent biological replicates were performed. Statistical analysis was carried out as described [20]. Briefly, standardization of gene expression data was performed from three biological replicates as described [106]. 2-ΔΔCq was used to achieve results for relative quantification. For statistical analysis, ANOVA (analysis of variance) was calculated using SPSS (Version 19.0, IBM, USA).

Analysis of SmWRKY expression in response to yeast extract and Ag⁺ treatment

RNA-seq data for S. miltiorrhiza hairy roots treated with yeast extract (100 μg/ml) and Ag⁺ (30 μM) were downloaded from GenBank under the accession number SRR924662 [12]. RNA-seq reads from non-treated (0 hpi) and treated for 12 h (12 hpi), 24 h (24 hpi) and 36 h (36 hpi) were mapped to SmWRKYs using the SOAP2 software [87] and analyzed as described previously [107]. The parameter v cutoff of 3 and parameter r cutoff of 2 were applied. SmWRKYs with the RPKM value greater than 2 were analyzed for differential expression using Fisher’s exact test. P < 0.05 was considered as differentially expressed.

Ka and Ks calculation

Paralogous SmWRKY genes were inferred from phylogenetic analysis. Non-synonymous (Ka) and synonymous (Ks) substitution of each paralogous gene pair were also determined by PAL2NAL program (http://www.bork.embl.de/pal2nal/) [108], which is based on the codon model program in PAML [68].

Tests of positive selection

To determine whether the WRKY gene family exhibited evidence of positive selection under the site model and branch-site model [71], we applied the codeml program in PAML v4.8 to test the hypothesis of positive selection. An unrooted phylogenetic tree of SmWRKYs was reconstructed using the maximum likelihood method. In the site model, M0 (one ratio), M1a (neutral), M2a (selection), M3 (discrete), M7 (beta) and M8 (beta + ω > 1) were applied to the alignments, and we detected variation in the ω parameter among sites using the LRT for M1a vs. M2 a, M0 vs. M3 and M7 vs. M8. Branch-site model [72] was used to compare the non-synonymous/synonymous substitution rate ratio (Ka/Ks) between clades or sequences. The ratio of nonsynonymous-to-synonymous for each branch under model A was calculated. Posterior probabilities (Qks) were calculated using the BEB method [68].

Estimation of functional divergence

The software DIVERGE2 was used to detect the functional divergence among members of SmWRKY subgroups [74]. The method is based on maximum likelihood procedures to estimate significant changes in the site-specific shift. The coefficients of Type-I and Type-II functional divergence (θ_I and θ_II) between two clusters were calculated. The coefficients of Type-I and Type-II functional divergence (θ_I and θ_II) greater than 0 indicates that site specific altered selective constraints or a radical shift of amino acid physiochemical property occurred after gene duplication and/or speciation [74]. Large posterior probability (Qk) indicates a high possibility that the functional constraint (or the evolutionary rate) and/or the radical change in the amino acid property of a site is different between two clusters [74].

Availability of supporting data

SmWRKY sequences supporting the results of this article are available in GenBank under accession numbers KM823124–KM823184. The other supporting data are included within the article and its additional files.

Abbreviations

AS

Anthranilate synthase

BEB

Bayes empirical bayes

CAD1

(+)-δ-cadinene synthase

CDS

Coding sequence

Ka

Non-synonymous

Ks

Synonymous

DXS

1-deoxy-D-xylulose 5-phosphate synthase

GST

Glandular secretory trichome

LRT

Likelihood ratio test

MeJA

Methyl jasmonate

Mw

Molecular weight

pI

Isoelectric points

SLS

Secologanin synthase

TCM

Traditional Chinese medicine

TDC

Tryptophan decarboxylase

Additional files

Additional file 1: Table S1. ^{(64.5KB, xls)}

Sequence features of WRKYs in A. thaliana. Some sequence features of WRKYs in A. thaliana are shown.

Additional file 2: Table S2. ^{(33.5KB, xls)}

Primers used for cloning of SmWRKY CDSs. Complete set of primers used for amplification of SmWRKY CDSs.

Additional file 3: Table S3. ^{(47.5KB, doc)}

Maximum likelihood estimation of the coefficient of Type-I functional divergence (θ) from pairwise comparisons between WRKY groups. The coefficient of Type-I between WRKY groups is shown.

Additional file 4: Table S4. ^{(36KB, doc)}

Estimation of the coefficient of Type-II functional divergence (θ) from pairwise comparisons between WRKY groups. The coefficient of Type-II between WRKY groups is shown.

Additional file 5: Table S5. ^{(42KB, xls)}

Log-2 transformed RPKM value for SmWRKYs in hairy roots treated with or without yeast extract and Ag⁺. The transformed RPKM value and differential expression of SmWRKYs are shown.

Additional file 6: Table S6. ^{(37KB, xls)}

Ka/Ks and divergence analysis of paralogous SmWRKY genes. Ka, Ks and Ka/Ks are shown.

Additional file 7: Table S7. ^{(29.5KB, xls)}

Primers used for qRT-PCR analysis of SmWRKY genes. Complete set of primers used for qRT-PCR of SmWRKY genes.