Skip to main content
Springer logoLink to Springer
. 2015 Apr 18;24(5):1131–1140. doi: 10.1007/s10646-015-1460-6

Copper tolerance and distribution of epibiotic bacteria associated with giant kelp Macrocystis pyrifera in southern California

Julia Busch 1,2, Juliana Ribeiro Nascimento 3, Ana Carolina Rubem Magalhães 4, Bas E Dutilh 5,6, Elizabeth Dinsdale 1,
PMCID: PMC4460293  PMID: 25893330

Abstract

Kelp forests in southern California are important ecosystems that provide habitat and nutrition to a multitude of species. Macrocystis pyrifera and other brown algae that dominate kelp forests, produce negatively charged polysaccharides on the cell surface, which have the ability to accumulate transition metals such as copper. Kelp forests near areas with high levels of boating and other industrial activities are exposed to increased amounts of these metals, leading to increased concentrations on the algal surface. The increased concentration of transition metals creates a harsh environment for colonizing microbes altering community structure. The impact of altered bacterial populations in the kelp forest have unknown consequences that could be harmful to the health of the ecosystem. In this study we describe the community of microorganisms associated with M. pyrifera, using a culture based approach, and their increasing tolerance to the transition metal, copper, across a gradient of human activity in southern California. The results support the hypothesis that M. pyrifera forms a distinct marine microhabitat and selects for species of bacteria that are rarer in the water column, and that copper-resistant isolates are selected for in locations with elevated exposure to transition metals associated with human activity.

Keywords: Copper tolerance, Bacterial isolate, Kelp forest

Introduction

Kelp forests are one of the most widespread and productive ecosystems. Found in shallow temperate coastal waters as well as deeper tropical waters, kelp forests are dominated by brown algae from the genus Laminaria (Santelices 2007), such as Macrocystis pyrifera (giant kelp) and their high productivity provide habitats and nutrients to an entire ecosystem (Egan et al. 2008; Goecke et al. 2010). The nutrient-rich surface of the macroalgae provides a desirable location for epibiotic colonization resulting in higher abundance and diversity of microbial populations (Egan et al. 2008; Blight and Thompson 2008; Armstrong et al. 2001; Lachnit et al. 2011). Kelp produces a matrix of acidic polysaccharides that have a high binding affinity for transition metals such as copper (Davis et al. 2003; Andrade et al. 2004, 2010). While the algal surface is desirable for colonization, in locations where the amount of transition metals is increased by human activity, the bioaccumulation of metals by the kelp may create a stressful environment for bacteria.

Urbanization, industrialization and boating activity can increase the levels of transition metals entering the ocean. In particular, copper-based paint used to prevent marine fouling on boat hulls contributes to elevated levels of transition metals in marinas and bays around the world (Dobalian and Arias 2005; Biggs and D’Anna 2012; Schiff et al. 2006). In 2004 the average copper level in San Diego Bay was 8 ppb (Johnson and Gonzalez 2005), a 36-fold increase of the natural level of 0.225 ppb in ocean water (Blossom 2007). While copper is an essential micronutrient, in high levels it is lethal. The distribution of marine cyanobacteria cells is adversely affected by copper exposure and strains from populated coastal areas are more tolerant to elevated copper levels than those from the open ocean (Stuart et al. 2009; Moffett et al. 2012). However, little research has been conducted on the microbes associated with the kelp forest and the effects of transition metal accumulation. In southern California, the combination of high boating activity and the close proximity of kelp forests to marinas may increase the bioaccumulation of transition metals. To examine whether there was an effect of bioaccumulation of transition metals on microbial populations, we isolated bacteria from the kelp surface and surrounding water at three locations in southern California and described their taxonomic distribution and effect of copper on their growth.

Materials and methods

Bacteria were cultured from blades of M. pyrifera and surface seawater from three different kelp forest locations in southern California: The Point Loma kelp forest (32°39′59.56″N, 117°14′50.62″W) close to the port of San Diego, La Jolla kelp forest (32°50′3.71″N, 117°16′54.57″W) located adjacent to an urban area but with minimal boating activity, and Santa Catalina Island (33°27′1.89″N, 118°29′12.32″W) located adjacent a marine protected area approximately 70 km from the mainland (Fig. 1). Bacteria associated with the surface of the algae were obtained by washing the blade in 0.02 μm-filtered seawater to remove loosely associated bacteria. After washing, the kelp was wiped across the media plates transferring the viscous surface mucus and associated microbes onto the agar. Bacteria closely associated with the kelp blade tissue were isolated using a technique adapted from Burke et al. (2009) in which kelp surface-associated bacteria were eliminated before plating. The kelp blade pieces were washed in a 1 % bleach solution with gentle agitation for 30 s followed by two washes in 0.02 μm filtered seawater and the blade pieces were applied directly onto the agar. Additional bacterial isolates were obtained by crushing the kelp blade using a sterile mortar and pestle and a 100 μl sample was pipetted onto the media. Bacteria from the water column were obtained from around the kelp blades and 100 μl plated. The media used included TCBS (Neogen Cat. No. 7210A) and Marine Broth (Difco Laboratories Cat. No. 2013-10-31) with 15 g/l agar added. Bacteria were cultured at room temperature and streaked until purification. A total of 600 bacterial isolates were grown and a random set (98) were selected for RFLP analysis and copper tolerance assays.

Fig. 1.

Fig. 1

a A map of the San Diego Bay labeled with the areas with high boating activity that contribute to the copper load in the water. a Navy Submarine Base; b Shelter Island; c Fisherman’s Landing; d Harbor Island; e US Coast Guard; f B St. Cruise Ship Terminal, Broadway Pier, USS Midway; g Tuna Basin; h Embarcadero Marina; i US Naval Station; j Chula Vista Yacht Club; k South Bay Power Plant; l Coronado Cays; m Fiddler’s Cove; n Naval Amphibious Base Coronado; o Glorietta Bay; p Naval Air Station North Island. b Sampling locations off the coast of southern California. La Jolla (32°50′3.71″N, 117°16′54.57″W); Pt. Loma (32°39′59.56″N, 117°14′50.62″W); Catalina (33°27′1.89″N, 118°29′12.32″W)

Bacterial DNA was extracted using nuclei lysis buffer and protein precipitate solution. 16S PCR amplification was performed in which the DNA was denatured for 5 min at 94 °C and amplified through 30 cycles of 94 °C for 1 min, 65 °C for 1 min with 0.5 °C touchdown, 72 °C for 3 min, with a final extension of 72 °C for 10 min. The amplified 16S rDNA was detected by electrophoresis on a 1 % agarose gel with 0.5 μg/ml ethidium bromide in 1× TBE buffer.

To investigate the types of bacteria that were associated with either kelp or the water column at the three locations we conducted a restriction fragment length polymorphism (RFLP) analysis. The 16S sequences of 98 randomly selected bacteria were purified and digested using three restriction endonucleases: ScaI, HaeIII, and MspI. The digested 16S rDNA was run on a 2 % agarose gel followed by staining in ethidium bromide with a final concentration of 0.5 μg/ml. The 16S rDNA PCR product of one isolate from each RFLP group was sequenced using Sanger sequencing. Two sequences were sequenced from Pattern A to investigate whether the restriction pattern were unique to a species. The sequences were aligned with MUSCLE (Edgar 2004) and a maximum likelihood phylogenetic tree was created using RAxML (Stamatakis 2014) with standard settings and 100 bootstrap repetitions. Reference sequences for the phylogenetic analysis where chosen from NCBI after the alignment to identify the type strain of the closes matches to our 16S sequences. The type strains used were of Alteromonas addita, Photobacterium phosphoreum, Pseudoalteromonas arctica, Pseudoalteromonas citrea, Pseudoalteromonas espejiana, Psychroserpens burtonensis, Ruegeria mobilis, Shewanella fidelia, Vibrio cyclitrophicus, Vibrio mediterranei, Vibrio parahaemolyticus, Vibrio splendidus, and Vibrio wodanis (accession numbers: AY682202, PHR16SRD4, DQ787199, X82137, X82143, PBU62913, AB255401, AF420312, AM162656, X74710, AF388386, AJ515230, AJ132227 respectively).

The accumulation of copper in kelp was compared for Pt. Loma, near the highest human occupation and Catalina near the lowest level of human occupation in this study. The amount of copper in M. pyrifera blades were quantified using an acid digestion method modified from Warnau et al. (1995). The digested samples were analyzed on a Perkin–Elmer DV 4300 inductively coupled plasmid atomic emissions spectrometer (ICP-AES) and conversion calculations were performed to determine the for Cu concentrations. Differences between the copper concentrations at Catalina and Pt. Loma were compared using a student t test. Water quality measurements, including temperature, salinity, pH, dissolved oxygen, and chlorophyll-a were taken at surface (~0.5 m) and benthos (~12 m) for both the Pt. Loma and Catalina Island kelp forest collection sites with a MANTA-2 multiprobe (Measurement Specialties, VA, USA). A two sample two sided t test for each of the water quality measurements was use to compare the mean from three replicate measurements.

Growth inhibition assays were conducted in order to identify whether the bacteria isolated from different kelp forests had varying tolerance to copper. The median inhibitory concentration (IC50) of a bacterial isolate was defined as the lowest concentration of Cu at which growth was half the control value. IC50 assays were performed on ten bacterial isolates from Pt. Loma, ten bacterial isolates from La Jolla, and eight bacterial isolates from Catalina. A stock copper solution of CuSO4·5H2O in deionized water was prepared and sterilized. Bacterial isolates were grown from 1:1000 inoculations of overnight cultures in sterile Zobell Marine Broth 2216 (Difco™) with ranging concentrations of copper. Five replicates of each copper concentration were incubated for 18–20 h at room temperature. Optical density was measured at 550 nm to compare bacterial growth inhibition. To explore the relationship of kelp-associated and seawater isolates and growth inhibition by copper, a one-way ANOVA test was conducted, with the effect of geographic location and sample type (i.e., kelp or seawater) being tested.

Results

To investigate whether sample type (i.e., kelp tissue or water) or geographic location affected bacterial distribution, a random selection of 98 isolates was classified and 18 different RFLP patterns (labeled A through R) were identified (Table 1). Of the 98 isolates, 57 were Vibrio species and were found in both kelp and water from all three locations (Table 1, 2). Bacteria with RFLP Pattern A—most similar to V. splendidus were the most abundant and widespread, while Pattern B—most similar to V. cyclitrophicus was found across all three locations but not all sample types (Table 1). In addition to geographical differences, eight bacterial species most similar to Ruegeria sp., three Pseudoalteromonas spp., Alteromonas sp., two additional Vibrio spp., and Psychroserpens sp. were specific to kelp (n = 18 isolates), and two groups of bacteria were found exclusively in water (n = 7 isolates) including species similar to V. wodanis and P. phosphoreum.

Table 1.

Sizes of RFLP fragments obtained from PCR amplified 16S rDNA of marine bacterial isolates

Stock number Location ScaI HaeIII MspI Restriction pattern
156 Catalina kelp 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
157 Catalina kelp 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
260 Catalina kelp 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
330 Catalina kelp 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
131 Catalina water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
147 Catalina water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
149 Catalina water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
189 Catalina water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
3 La Jolla kelp 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
4 La Jolla kelp 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
5 La Jolla kelp 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
592 La Jolla kelp 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
593 La Jolla kelp 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
594 La Jolla kelp 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
595 La Jolla kelp 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
596 La Jolla kelp 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
598 La Jolla kelp 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
599 La Jolla kelp 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
582 La Jolla water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
584 La Jolla water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
585 La Jolla water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
586 La Jolla water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
590 La Jolla water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
591 La Jolla water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
642 La Jolla water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
400 Pt. Loma water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
401 Pt. Loma water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
403 Pt. Loma water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
404 Pt. Loma water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
406 Pt. Loma water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
407 Pt. Loma water 1100, 475 310, 290, 210, 190, 150 550, 520, 125 A
252 Catalina water 1100, 475 310, 290, 210, 190, 150 550, 520 B
411 Catalina water 1100, 475 310, 290, 210, 190, 150 550, 520 B
653 La Jolla kelp 1100, 475 310, 290, 210, 190, 150 550, 520 B
643 La Jolla water 1100, 475 310, 290, 210, 190, 150 550, 520 B
478 Pt. Loma kelp 1100, 475 310, 290, 210, 190, 150 550, 520 B
479 Pt. Loma kelp 1100, 475 310, 290, 210, 190, 150 550, 520 B
480 Pt. Loma kelp 1100, 475 310, 290, 210, 190, 150 550, 520 B
482 Pt. Loma kelp 1100, 475 310, 290, 210, 190, 150 550, 520 B
501 Pt. Loma kelp 1100, 475 310, 290, 210, 190, 150 550, 520 B
129 Catalina kelp Uncut 310, 290, 210, 190, 150 550, 520 C
136 Catalina kelp Uncut 310, 290, 210, 190, 150 550, 520 C
517 Catalina kelp Uncut 310, 290, 210, 190, 150 550, 520 C
120 Catalina water Uncut 310, 290, 210, 190, 150 550, 520 C
121 Catalina water Uncut 310, 290, 210, 190, 150 550, 520 C
122 Catalina water Uncut 310, 290, 210, 190, 150 550, 520 C
137 Catalina water Uncut 310, 290, 210, 190, 150 550, 520 C
515 Catalina water Uncut 310, 290, 210, 190, 150 550, 520 C
635 Catalina water Uncut 310, 290, 210, 190, 150 550, 520 C
522 Pt. Loma kelp Uncut 500, 290, 190, 125 600, 475, 275, 150 D
523 Pt. Loma kelp Uncut 500, 290, 190, 125 600, 475, 275, 150 D
524 Pt. Loma kelp Uncut 500, 290, 190, 125 600, 475, 275, 150 D
525 Pt. Loma kelp Uncut 500, 290, 190, 125 600, 475, 275, 150 D
526 Pt. Loma kelp Uncut 500, 290, 190, 125 600, 475, 275, 150 D
527 Pt. Loma kelp Uncut 500, 290, 190, 125 600, 475, 275, 150 D
575 Pt. Loma kelp Uncut 500, 290, 190, 125 600, 475, 275, 150 D
576 Pt. Loma kelp Uncut 500, 290, 190, 125 600, 475, 275, 150 D
583 La Jolla water Uncut 500, 290, 190, 125, 100 500, 375, 190, 125 E
644 La Jolla water Uncut 500, 290, 190, 125, 100 500, 375, 190, 125 E
645 La Jolla water Uncut 500, 290, 190, 125, 100 500, 375, 190, 125 E
646 La Jolla water Uncut 500, 290, 190, 125, 100 500, 375, 190, 125 E
483 Pt. Loma kelp Uncut 500, 290, 190, 125, 100 500, 375, 190, 125 E
484 Pt. Loma kelp Uncut 500, 290, 190, 125, 100 500, 375, 190, 125 E
485 Pt. Loma kelp Uncut 500, 290, 190, 125, 100 500, 375, 190, 125 E
521 Pt. Loma kelp Uncut 500, 290, 190, 125, 100 500, 375, 190, 125 E
588 La Jolla kelp 1100, 475 500, 290, 190, 125 550, 520 F
654 La Jolla kelp 1100, 475 500, 290, 190, 125 550, 520 F
657 La Jolla kelp 1100, 475 500, 290, 190, 125 550, 520 F
658 La Jolla kelp 1100, 475 500, 290, 190, 125 550, 520 F
659 La Jolla kelp 1100, 475 500, 290, 190, 125 550, 520 F
581 La Jolla water 1100, 475 500, 290, 190, 125 550, 520 F
132 Catalina water 1100, 475 310, 290, 210, 190, 150 510, 480 G
187 Catalina water 1100, 475 310, 290, 210, 190, 150 510, 480 G
253 Catalina water 1100, 475 310, 290, 210, 190, 150 510, 480 G
412 Catalina water 1100, 475 310, 290, 210, 190, 150 510, 480 G
639 La Jolla water 1100, 475 310, 290, 210, 190, 150 510, 480 G
127 Catalina kelp 1100, 475 310, 290, 250, 210, 190, 150 550, 520 H
133 Catalina kelp 1100, 475 310, 290, 250, 210, 190, 150 550, 520 H
134 Catalina kelp 1100, 475 310, 290, 250, 210, 190, 150 550, 520 H
135 Catalina kelp 1100, 475 310, 290, 250, 210, 190, 150 550, 520 H
641 La Jolla water 1100, 475 310, 290, 250, 210, 190, 150 550, 520 H
329 Catalina kelp Uncut 310, 290, 210, 190, 150 510, 480, 125 I
416 Catalina kelp Uncut 310, 290, 210, 190, 150 510, 480, 125 I
139 Catalina water Uncut 310, 290, 210, 190, 150 510, 480, 125 I
248 Catalina kelp 1100, 475 500, 290, 210, 190, 125 510, 375, 180 J
647 La Jolla water 1100, 475 500, 290, 210, 190, 125 510, 375, 180 J
587 La Jolla kelp 850, 475, 225 500, 290, 190, 125 550, 520 K
589 La Jolla kelp 850, 475, 225 500, 290, 190, 125 550, 520 K
656 La Jolla kelp Uncut 310, 290, 190, 150 550, 520 L
486 Pt. Loma kelp Uncut 310, 290, 190, 150 550, 520 L
142 Catalina kelp Uncut 500, 290, 190, 125 510, 375, 180 M
143 Catalina kelp Uncut 500, 290, 190, 125 510, 375, 180 M
651 La Jolla kelp 850, 650 310, 290, 190, 150 510, 480 N
413 Catalina kelp Uncut 310, 290, 210, 175, 150 550, 520 O
124 Catalina water Uncut 390, 310, 290, 190, 150 550, 520 P
637 Pt. Loma kelp Uncut 500, 290, 190, 125, 100 550, 520, 125 Q
481 Pt. Loma kelp Uncut 650, 290,250, 190 800, 450, 125 R

Bold numbers indicate sequenced Isolates from each group

Table 2.

BLASTn results of 16S rDNA sequences from each RFLP pattern

Sequenced stock number RFLP pattern number of isolates Percent found in kelp Class Family Hypothesized classification Accession number
ED401 A 31 45.16 Gamma proteobacteria Vibrionaceae Vibrio sp. KF442438
ED478 B 9 66.6 Gamma proteobacteria Vibrionaceae Vibrio sp. KF442439
ED121 C 9 33.3 Gamma proteobacteria Vibrionaceae Vibrio sp. KF442440
ED575 D 8 100 Alpha proteobacteria Rhodobacteraceae Ruegeria sp. KF442441
ED583 E 8 50 Gamma proteobacteria Alteromonadaceae Pseudoalteromonas sp. KF442442
ED588 F 6 83.3 Gamma proteobacteria Alteromonadaceae Pseudoalteromonas sp. KF442443
ED187 G 5 0 Gamma proteobacteria Vibrionaceae Photobacterium sp. KF442444
ED641 H 5 80 Gamma proteobacteria Vibrionaceae Vibrio sp. KF442445
ED329 I 3 66.6 Gamma proteobacteria Shewanellaceae Shewanella sp. KF442446
ED248 J 2 50 Gamma proteobacteria Alteromonadaceae Pseudoalteromonas sp. KF442447
ED589 K 2 100 Gamma proteobacteria Alteromonadaceae Pseudoalteromonas sp. KF442448
ED486 L 2 100 Gamma proteobacteria Alteromonadaceae Alteromonas sp. KF442449
ED142 M 2 100 Gamma proteobacteria Alteromonadaceae Pseudoalteromonas sp. KF442450
ED651 N 1 100 Gamma proteobacteria Vibrionaceae Vibrio sp. KF442451
ED413 O 1 100 Gamma proteobacteria Vibrionaceae Vibrio sp. KF442452
ED124 P 1 0 Gamma proteobacteria Vibrionaceae Vibrio sp. KF442453
ED637 Q 1 100 Gamma proteobacteria Alteromonadaceae Pseudoalteromonas sp. KF442454
ED481 R 1 100 Flavobacteria Flavobacteriaceae Psychroserpens sp. KF442455
Total 18 97 3 5 18

Isolates from geographic locations and sample types were distributed evenly throughout the phylogenetic tree (Fig. 2). The Vibrio and Pseudoalteromonas species clustered into two separated groups and bacteria isolates that had the RLFP Pattern D were not similar to anything in the database and appeared as an outlier in the phylogenetic analysis, suggesting it is a new species based on the 16S rDNA sequence (Fig. 2).

Fig. 2.

Fig. 2

Phylogenetic tree of 16S rDNA sequences created from a MUSCLE alignment using RAxML. Bootstrap values (100 iterations) are indicated at the nodes. The scale bar indicates 0.2 mutations per site

The concentration of copper found in the kelp from Pt. Loma was greater with a mean of 6.21 (± 0.19) ppm compared with the kelp from Catalina which had a mean of 4.33 (±0.08) ppm (Tdf=4 = 10.334, p < 0.001). No data was collected from La Jolla. Water quality measurements indicate that the Pt. Loma and Catalina Island kelp forests were similar at surface depths for dissolved oxygen levels (p = 0.345) and salinity (p = 0.107), and similar at the benthos for chlorophyll-a (p = 0.891). In contrast, temperature was higher at the surface in Pt. Loma compared to Catalina [x̄PtLoma = 16.807 (±0.039) °C, x̄Catalina = 16.593 (±0.009) °C] (p = 0.027), yet lower in the benthos of Pt. Loma compared to Catalina [x̄PtLoma = 12.210 (±0.015) °C, x̄Catalina = 15.167 (±0.003) °C] (p < 0.001). In addition, pH was higher in Catalina at surface [x̄PtLoma = 8.073 (±0.055), x̄Catalina = 8.847 (±0.009)] (p = 0.004) and benthos [x̄PtLoma = 8.397 (±0.003), x̄Catalina = 8.783 (±0.007)] (p < 0.001). Furthermore, chlorophyll-a was higher at the surface of Pt. Loma [x̄PtLoma = 1.347 (±0.015) mg/l, x̄Catalina = 1.253 (±0.018) mg/l] (p = 0.016), while dissolved oxygen was lower [x̄PtLoma = 6.123 (±0.023) mg/l, x̄Catalina = 8.880 (±0.010) mg/L] (p < 0.001) and salinity was higher [x̄PtLoma = 45.361 (±0.026) ppt, x̄Catalina = 41.770 (±0.027) ppt] (p < 0.001) at the benthos of Pt. Loma compared to Catalina (Table 3).

Table 3.

Water quality measurements taken with a MANTA-2 multiprobe

Depth (m) Temp (°C) Salinity (ppt) pH Chlorophyll-a (mg/l) Dissolved oxygen
(% sat)
Dissolved oxygen
(mg/l)
Pt. Loma 0.607 ± 0.047 16.807 ± 0.039 40.308 ± 0.039 8.073 ± 0.055 1.347 ± 0.015 118.067 ± 2.034 9.367 ± 0.153
13.950 ± 0.183 12.210 ± 0.015 45.361 ± 0.026 8.397 ± 0.003 3.853 ± 0.116 70.267 ± 0.260 6.123 ± 0.023
Catalina 0.230 ± 0.006 16.593 ± 0.009 40.205 ± 0.010 8.847 ± 0.009 1.253 ± 0.018 115.000 ± 0.808 9.177 ± 0.064
11.490 ± 0.074 15.167 ± 0.003 41.770 ± 0.027 8.783 ± 0.007 3.973 ± 0.766 108.233 ± 0.167 8.880 ± 0.010

Data was logged at surface and benthos depths for each water collection site; Pt. Loma and Catalina Island, California kelp forests. Values displayed are the mean for three replicate measurements, with standard error of the mean (SEM)

For all kelp forest bacterial isolates, the lowest concentrations of copper in the media resulted in a slight decrease in optical density. After the decrease, bacterial growth was maintained until a steep drop was observed in the graph of absorbance versus copper concentration suggesting the copper concentration had reached an inhibitory level (Fig. 3a–c). The IC50 data for Pt. Loma isolates (n = 10) showed higher copper tolerance with the majority of growth inhibition occurring between 200 and 250 ppm Cu (Fig. 3a). The bacterial isolates from La Jolla (n = 10) showed growth inhibition occurring between 150 and 275 ppm Cu (Fig. 1b). Catalina isolates (n = 9) showed growth inhibition occurring between 100 and 225 ppm of Cu (Fig. 3c).

Fig. 3.

Fig. 3

a The concentration of copper that inhibited bacterial growth in isolates from Pt. Loma was found to be above 200 ppm in all but one sample. b The concentration of copper that inhibited bacterial growth in isolates from La Jolla was found to range from 150 to 275 ppm. c The concentration of copper that inhibited bacterial growth in isolates from Catalina was found to range from 100 to 225 ppm. d Mean copper inhibitory growth concentrations of M. pyrifera (green) and seawater (blue) associated bacterial isolates across three geographic locations. e The copper MIC assay data for bacterial species classified as similar to V. cyclitrophicus by 16S rDNA isolated from Pt. Loma (red), La Jolla (blue), and Catalina (green). The isolates from Pt. Loma were the most resistant to copper while the one collected from Catalina was the least copper tolerant. Isolate numbers used in the MIC are from: Pattern A—ED400, ED3, ED4, ED5, ED582, ED147,ED149, Pattern B—D8, ED478, ED482, ED395, ED653, ED643, Pattern C—ED129, Pattern E—ED583, ED484, Pattern G—ED639, Pattern H—ED2, ED133, Pattern I—ED416, ED139, Pattern O—ED413 (Color figure online)

The minimal inhibitory concentration varied with location (Fdf=2 = 41.215 and p < 0.001), sample type (Fdf=1 = 4.018 and p = 0.047) and there was an interaction between location and sample type (Fdf=2 = 11.394 and p < 0.001) (Fig. 3d). The minimal inhibitory concentration was highest at Pt. Loma and the kelp associated bacteria had a higher IC50 than the water associated bacteria. The second highest IC50 values were found at La Jolla, but the water associated bacteria had higher IC50 than the kelp associated bacteria. Catalina showed the lowest IC50 and once again the kelp associated bacteria had higher IC50 than the water associated bacteria. Trends of the copper tolerance of the community of bacteria were observed in specific bacterial species where five isolates similar to V. cyclitrophicus from M. pyrifera and seawater showed different values for copper tolerance across the three geographic locations (Fig. 3e). The copper tolerance of isolates was negatively correlated with distance from human urbanization and marinas.

Discussion

High levels of urbanization, boating and the resultant copper introduced into the water column from antifouling paint may be capable of affecting the structure and function of bacterial populations in kelp forests. Bacterial isolates from Pt. Loma, the location with highest measured copper levels, were able to tolerate copper concentrations significantly higher than bacteria isolated from La Jolla and Catalina, locations with less human activity (Fig. 3d). We showed that the input of transient metals causes a physiological change (tolerance to copper) in the bacteria and the ramifications of these changes on the kelp health will be the goals of future research. Because a range of bacterial species were tested, we show that the development of copper tolerance was location rather than species specific, suggesting that bacteria that lived in a higher copper habitat develop the ability to withstand higher levels of copper.

In addition to the positive correlation between copper pollution and bacterial copper resistance across different species, we observed that strains of a single species, similar to V. cyclitrophicus, had higher copper tolerance from Catalina to La Jolla, and the greatest tolerance was found in isolates from Pt. Loma (Fig. 3e). The results of increased copper tolerance in bacteria from areas with higher levels of copper are consistent with findings that Enterobacteriaceae strains from marine sediments and seawater have copper resistance directly influenced by pollution (Altug and Balkis 2009). These results suggest that some marine bacteria are able to increase their tolerance to higher levels of copper when living in locations with elevated inputs of transient metals.

Copper in the oceanic water column is reported to be 0. 225 ppb (Blossom 2007) and levels in San Diego Bay was ~8 ppb (Johnson and Gonzalez 2005; Neira et al. 2011), and we found that the copper in the kelp at Pt. Loma and Catalina was high, a mean 6.21 and 4.5 ppm respectively, showing the kelp is concentrating the copper from the water column. The amount of copper in an organism depends on the diffusion across tissue boundaries and the amount to which it is retained in the organism (Neira et al. 2011). The switch in higher copper tolerance in the microbes isolated from the water column compared to the kelp at La Jolla, suggests that at this location the copper may be returning to solution at a faster rate than at Pt. Loma or Catalina. Although the concentrations of copper at which bacterial growth was inhibited for the majority of isolates were above the levels found in M. pyrifera from Pt. Loma and Catalina, our results suggests that the transient metals in the environment are correlated with a phenotypic change in the bacteria. In addition previous studies have shown that the brown macroalgae Ascophyllum sp. and Laminaria japonica can accumulate 80.06 and 100.03 ppt of Cu respectively (Mehta and Gaur 2005),which is 1000 fold greater than the concentrations shown to inhibit growth of the bacterial isolates (Fig. 3). If the antifoulant paint used on boats in the San Diego Bay and other marinas worldwide continue to contribute copper to the water, in addition to other anthropogenic inputs, the algae in adjacent kelp forests such as Pt. Loma are capable of accumulating lethal concentrations of copper for even the most resistant bacterial isolate and these changes in epibiosis may affect kelp health.

A distinct bacterial communities associated with giant kelp were identified. Of the 18 RFLP patterns observed, ten were found in a particular location and ten are specific to either kelp or seawater. These results support the hypothesis that kelp forms a distinct microhabitat that selects for certain species of bacteria that are rare in the surrounding water and we are currently investigating the genotypes of these species to identify why they a specific to either kelp or water column. Vibrio species were the dominant organism cultured from the kelp and surrounding water (Table 1). These gram negative, motile rod-shaped species are ubiquitous in marine environments and are found in especially high amounts on eukaryotic host organisms, such as coral and algae (Thompson et al. 2004). This is consistent with our findings as bacterial species from the Vibrio genus were the most widespread in terms of location as well as the most abundant. Pseudoalteromonas is another well-represented marine Gamma proteobacteria and representatives from this genus have been isolated from both brown and green algae as well as seawater (Egan et al. 2008; Sawabe et al. 1998; Staufenberger et al. 2008). Shewanella species have previously been isolated from both seawater and marine organisms and also have the ability to digest agar (Ivanova et al. 2001, 2004). While some species were isolated from both sample types across all sampling sites, many were exclusive to geographical location. Catalina and Pt. Loma, the sites with the least and greatest anthropogenic effects, respectively, have more species that appear to be specific to the locations than La Jolla. Our current research is investigating the non-cultured organisms associated with the kelp using next generation DNA sequencing of metagenomes, which will provide a more complete picture of the kelp microbiome. By culturing bacteria we are able to conduct phenotypic analysis, which are not possible with metagenomics. In addition, we are sequencing the genomes of the cultured bacteria to understand the underpinnings of the phenotypic differences in copper tolerance of the bacteria.

The results of this study suggest that marine microbes are subject to selection at the species level across different geographical locations with varying anthropogenic and industrial influences. Furthermore, kelp appears to select for certain species of bacteria, creating a diverse and distinct microbiome on the algal surface. Kelp forests near industrial areas appear to be decreasing in cover and to date, have failed to recover to pre-1950 levels (Coleman et al. 2008; Connell et al. 2008; Foster and Schiel 2010). The consequences of an altered microbial community could have dramatic effects on the health of the ecosystem and warrants further investigation.

Acknowledgments

Dinsdale is supported by NSF Division of Undergraduate Education #1323809 and Division of Microbial Biology #1330800, and FIPSE-CAPES USA-Brazil Higher Education Consortia Program. Nascimento and Magalhães are supported by CAPES-FIPSE. Dutilh is supported by the Dutch Science foundation (NWO) Veni Grant 016.111.075.

Conflict of interest

The authors declare that they have no conflict of interest.

References

  1. Altug G, Balkis N. Levels of some toxic elements and frequency of bacterial heavy metal resistance in sediment and sea water. Environ Monit Assess. 2009;149:61–69. doi: 10.1007/s10661-008-0183-z. [DOI] [PubMed] [Google Scholar]
  2. Andrade LR, Salgado LT, Farina M, et al. Ultrastructure of acidic polysaccharides from the cell walls of brown algae. J Struct Biol. 2004;145:216–225. doi: 10.1016/j.jsb.2003.11.011. [DOI] [PubMed] [Google Scholar]
  3. Andrade LR, Leal RN, Noseda M, et al. Brown algae overproduce cell wall polysaccharides as a protection mechanism against the heavy metal toxicity. Mar Pollut Bull. 2010;60:1482–1488. doi: 10.1016/j.marpolbul.2010.05.004. [DOI] [PubMed] [Google Scholar]
  4. Armstrong E, Yan L, Boyd KG, et al. The symbiotic role of marine microbes on living surfaces. Water. 2001;461:37–40. [Google Scholar]
  5. Biggs TW, D’Anna H. Rapid increase in copper concentrations in a new marina, San Diego Bay. Mar Pollut Bull. 2012;64:627–635. doi: 10.1016/j.marpolbul.2011.12.006. [DOI] [PubMed] [Google Scholar]
  6. Blight AJ, Thompson RC. Epibiont species richness varies between holdfasts of a northern and a southerly distributed kelp species. J Mar Biol Assoc UK. 2008;88:469–475. doi: 10.1017/S0025315408000994. [DOI] [Google Scholar]
  7. Blossom N (2007) Copper in the Ocean Environment. Am Chemet Corp 1–8
  8. Burke C, Kjelleberg S, Thomas T. Selective extraction of bacterial DNA from the surfaces of macroalgae. Appl Environ Microbiol. 2009;75:252–256. doi: 10.1128/AEM.01630-08. [DOI] [PMC free article] [PubMed] [Google Scholar]
  9. Coleman MA, Kelaher BP, Steinberg PD, Millar AJK. Absence of a large brown macroalgae on urbanized rocky reefs around Sydney, Australia, and evidence for historical decline 1. J Phycol. 2008;44:897–901. doi: 10.1111/j.1529-8817.2008.00541.x. [DOI] [PubMed] [Google Scholar]
  10. Connell S, Russell B, Turner D, et al. Recovering a lost baseline: missing kelp forests from a metropolitan coast. Mar Ecol Prog Ser. 2008;360:63–72. doi: 10.3354/meps07526. [DOI] [Google Scholar]
  11. Davis TA, Volesky B, Mucci A. A review of the biochemistry of heavy metal biosorption by brown algae. Water Res. 2003;37:4311–4330. doi: 10.1016/S0043-1354(03)00293-8. [DOI] [PubMed] [Google Scholar]
  12. Dobalian L, Arias CM (2005) Total maximum daily load for dissolved copper in Shelter Island Yacht Basin. San Diego Regional Water Quality Board, Executive Officer's Report, 16 pp
  13. Edgar RC. MUSCLE: multiple sequence alignment with high accuracy and high throughput. Nucleic Acids Res. 2004;32:1792–1797. doi: 10.1093/nar/gkh340. [DOI] [PMC free article] [PubMed] [Google Scholar]
  14. Egan S, Thomas T, Kjelleberg S. Unlocking the diversity and biotechnological potential of marine surface associated microbial communities. Curr Opin Microbiol. 2008;11:219–225. doi: 10.1016/j.mib.2008.04.001. [DOI] [PubMed] [Google Scholar]
  15. Foster MS, Schiel DR. Loss of predators and the collapse of southern California kelp forests (?): alternatives, explanations and generalizations. J Exp Mar Bio Ecol. 2010;393:59–70. doi: 10.1016/j.jembe.2010.07.002. [DOI] [Google Scholar]
  16. Goecke F, Labes A, Wiese J, Imhoff J. Chemical interactions between marine macroalgae and bacteria. Mar Ecol Prog Ser. 2010;409:267–299. doi: 10.3354/meps08607. [DOI] [Google Scholar]
  17. Ivanova EP, Sawabe T, Gorshkova NM, et al. Shewanella japonica sp. nov. Int J Syst Evol Microbiol. 2001;51:1027–1033. doi: 10.1099/00207713-51-3-1027. [DOI] [PubMed] [Google Scholar]
  18. Ivanova EP, Gorshkova NM, Bowman JP, et al. Shewanella pacifica sp. nov., a polyunsaturated fatty acid-producing bacterium isolated from sea water. Int J Syst Evol Microbiol. 2004;54:1083–1087. doi: 10.1099/ijs.0.02993-0. [DOI] [PubMed] [Google Scholar]
  19. Lachnit T, Meske D, Wahl M, et al. Epibacterial community patterns on marine macroalgae are host-specific but temporally variable. Environ Microbiol. 2011;13:655–665. doi: 10.1111/j.1462-2920.2010.02371.x. [DOI] [PubMed] [Google Scholar]
  20. Mehta SK, Gaur JP. Use of algae for removing heavy metal ions from wastewater: progress and prospects. Crit Rev Biotechnol. 2005;25:113–152. doi: 10.1080/07388550500248571. [DOI] [PubMed] [Google Scholar]
  21. Moffett JW, Brand LE, Croot PL, et al. Cu speciation and cyanobacterial distribution in harbors subject to anthropogenic Cu inputs. Limnol Oceanogr. 2012;42:789–799. doi: 10.4319/lo.1997.42.5.0789. [DOI] [Google Scholar]
  22. Neira C, Mendoza G, Levin LA, Zirino A, Delgadillo-Hinojosa F, Porrachia M, Deheyn DD. Macrobenthic community response to copper in Shelter Island Yacht Basin, San Diego Bay, California. Mar Poll Bull. 2011;62:701–717. doi: 10.1016/j.marpolbul.2011.01.027. [DOI] [PubMed] [Google Scholar]
  23. Santelices B. The discovery of kelp forests in deep-water habitats of tropical regions. Proc Natl Acad Sci USA. 2007;104:19163–19164. doi: 10.1073/pnas.0708963104. [DOI] [PMC free article] [PubMed] [Google Scholar]
  24. Sawabe T, Makino H, Tatsumi M, et al. Pseudoalteromonas bacteriolytica sp. nov., a marine bacterium that is the causative agent of red spot disease of Laminaria japonica. Int J Syst Bacteriol. 1998;48:769–774. doi: 10.1099/00207713-48-3-769. [DOI] [PubMed] [Google Scholar]
  25. Schiff K, Brown J, Diehl D. Extent and magnitude of copper contamination in Marinas of the San Diego Region, California. Water Res. 2006;54:322–328. doi: 10.1016/j.marpolbul.2006.10.013. [DOI] [PubMed] [Google Scholar]
  26. Stamatakis A. RAxML version 8: a tool for phylogenetic analysis and post-analysis of large phylogenies. Bioinformatics. 2014;30:1312–1313. doi: 10.1093/bioinformatics/btu033. [DOI] [PMC free article] [PubMed] [Google Scholar]
  27. Staufenberger T, Thiel V, Wiese J, Imhoff JF. Phylogenetic analysis of bacteria associated with Laminaria saccharina. FEMS Microbiol Ecol. 2008;64:65–77. doi: 10.1111/j.1574-6941.2008.00445.x. [DOI] [PubMed] [Google Scholar]
  28. Stuart RK, Dupont CL, Johnson DA, et al. Coastal strains of marine Synechococcus species exhibit increased tolerance to copper shock and a distinctive transcriptional response relative to those of open-ocean strains. Appl Environ Microbiol. 2009;75:5047–5057. doi: 10.1128/AEM.00271-09. [DOI] [PMC free article] [PubMed] [Google Scholar]
  29. Thompson FL, Iida T, Swings J. Biodiversity of Vibrios. Microbiol Mol Biol Rev. 2004;68:403–431. doi: 10.1128/MMBR.68.3.403-431.2004. [DOI] [PMC free article] [PubMed] [Google Scholar]
  30. Warnau M, Ledent G, Temaral A, Jangouxr M. Experimental cadmium contamination of the echinoid Paracentrotus iividus: influence of exposure mode and distribution of the metal in the organism. Mar Ecol Prog Ser. 1995;116:117–124. doi: 10.3354/meps116117. [DOI] [Google Scholar]
  31. Johnson LT, Gonzalez JA (2005) Nontoxic antifouling? Demonstrating a solution to copper boat bottom paint pollution. In Proceedings of the 14th Biennial Coastal Zone Conference

Articles from Ecotoxicology (London, England) are provided here courtesy of Springer

RESOURCES