Xpert® Mtb/Rif assay for pulmonary tuberculosis and rifampicin resistance in adults

Karen R Steingart; Hojoon Sohn; Ian Schiller; Lorie A Kloda; Catharina C Boehme; Madhukar Pai; Nandini Dendukuri

doi:10.1002/14651858.CD009593.pub2

. 2013 Jan 31;(1):1–131. doi: 10.1002/14651858.CD009593.pub2

Xpert® Mtb/Rif assay for pulmonary tuberculosis and rifampicin resistance in adults

Karen R Steingart ¹, Hojoon Sohn ², Ian Schiller ³, Lorie A Kloda ⁴, Catharina C Boehme ⁵, Madhukar Pai ², Nandini Dendukuri ²

PMCID: PMC4470352 PMID: 23440842

Abstract

Background

Accurate and rapid detection of tuberculosis (TB) and drug resistance are critical for improving patient care and decreasing the spread of TB. Xpert® MTB/RIF assay (Xpert) is a rapid, automated test that can detect both TB and rifampicin resistance, within two hours after starting the test, with minimal hands-on technical time, but is more expensive than conventional sputum microscopy.

Objectives

To assess the diagnostic accuracy of Xpert for pulmonary TB (TB detection), both where Xpert was used as an initial test replacing microscopy, and where Xpert was used as an add-on test following a negative smear microscopy result.

To assess the diagnostic accuracy of Xpert for rifampicin resistance detection where Xpert was used as the initial test, replacing conventional culture-based drug susceptibility testing.

The population of interest was adults suspected of having pulmonary TB or multidrug-resistant TB (MDR-TB), with or without HIV infection.

Search methods

We performed a comprehensive search of the following databases: Cochrane Infectious Diseases Group Specialized Register; MEDLINE; EMBASE; ISI Web of Knowledge; MEDION; LILACS; BIOSIS; and SCOPUS. We also searched the metaRegister of Controlled Trials (mRCT) and the search portal of the WHO International Clinical Trials Registry Platform to identify ongoing trials. We performed searches on 25 September 2011 and we repeated them on 15 December 2011, without language restriction.

Selection criteria

We included randomized controlled trials, cross-sectional, and cohort studies that used respiratory specimens to compare Xpert with culture for detecting TB and Xpert with conventional phenotypic drug susceptibility testing for detecting rifampicin resistance.

Data collection and analysis

For each study, two review authors independently extracted a set of data using a standardized data extraction form. When possible, we extracted data for subgroups by smear and HIV status. We assessed the quality of studies using the QUADAS-2 tool. We carried out meta-analyses to estimate the pooled sensitivity and specificity of Xpert separately for TB detection and rifampicin resistance detection using a bivariate random-effects model. We estimated the median pooled sensitivity and specificity and their 95% credible intervals (CrI).

Main results

We identified 18 unique studies as eligible for this review, including two multicentre international studies, one with five and the other with six distinct study centres. The majority of studies (55.6%) were performed in low-income and middle-income countries. In 17 of the 18 studies, Xpert was performed by trained technicians in reference laboratories.

When used as an initial test replacing smear microscopy (15 studies, 7517 participants), Xpert achieved a pooled sensitivity of 88% (95% CrI 83% to 92%) and pooled specificity of 98% (95% CrI 97% to 99%). As an add-on test following a negative smear microscopy result (14 studies, 5719 participants), Xpert yielded a pooled sensitivity of 67% (95% CrI 58% to 74%) and pooled specificity of 98% (95% CrI 97% to 99%). In clinical subgroups, we found the following accuracy estimates: the pooled sensitivity was 98% (95% CrI 97% to 99%) for smear-positive, culture-positive TB and 68% (95% CrI 59% to 75%) for smear-negative, culture-positive TB (15 studies); the pooled sensitivity was 80% (95% CrI 67% to 88%) in people living with HIV and 89% (95% CrI 81% to 94%) in people without HIV infection (four studies). For rifampicin resistance detection (11 studies, 2340 participants), Xpert achieved a pooled sensitivity of 94% (95% CrI 87% to 97%) and pooled specificity of 98% (95% CrI 97% to 99%). In a separate analysis, Xpert could distinguish between TB and nontuberculous mycobacteria (NTM) in clinical samples with high accuracy: among 139 specimens with NTM, Xpert was positive in only one specimen that grew NTM.

In a hypothetical cohort of 1000 individuals suspected of having rifampicin resistance (a proxy for MDR-TB), where the prevalence of rifampicin resistance is 30%, we estimated that on average Xpert would wrongly identify 14 patients as being rifampicin resistant. In comparison, where the prevalence of rifampicin resistance is only 2%, we estimated that the number of individuals wrongly identified as rifampicin resistant would increase to 20, an increase of 43%.

Authors' conclusions

This review shows that Xpert used as an initial diagnostic test for TB detection and rifampicin resistance detection in patients suspected of having TB, MDR-TB, or HIV-associated TB is sensitive and specific. Xpert may also be valuable as an add-on test following microscopy for patients who have previously been found to be smear-negative. An Xpert result that is positive for rifampicin resistance should be carefully interpreted and take into consideration the risk of MDR-TB in a given patient and the expected prevalence of MDR-TB in a given setting.

Studies in this review mainly assessed sensitivity and specificity of the test when used in reference laboratories in research investigations. Most studies were performed in high TB burden countries. Ongoing use of Xpert in high TB burden countries will contribute to the evidence base on the diagnostic accuracy and clinical impact of Xpert in routine programmatic and peripheral health care settings, including settings where the test is performed at the point of care.

Background

Tuberculosis (TB) is one of the world's most important infectious causes of morbidity and mortality among adults. When TB is detected and effectively treated, the disease is largely curable. However, in 2010, 8.8 million people developed TB disease (active TB) for the first time (WHO Global Report 2011). Of the total new TB cases, approximately 13% occurred among people living with HIV. Among people without HIV infection, 1.1 million people (14%) died of TB and among people with HIV infection, 350,000 people (31%) died of TB (WHO Global Report 2011).

Drug-resistant TB, including multidrug-resistant TB (MDR-TB, defined as resistance to at least isoniazid and rifampicin, the two most important first-line anti-TB drugs) and extensively drug-resistant TB (XDR-TB, defined as MDR-TB plus resistance to any fluoroquinolone (such as ofloxacin or moxifloxacin) and to at least one of three injectable second-line drugs (amikacin, capreomycin, or kanamycin)) has emerged as a serious threat to global health (Zumla 2012). In 2010, there were an estimated 650,000 cases of MDR-TB (WHO Global Report 2011). Recently, the World Health Organization (WHO) reported the highest rates (greater than 65% in people who had previously received TB treatment) of MDR-TB ever recorded in several areas of the former Soviet Union (Zignol 2012). Worldwide, a substantial percentage (˜35%) of patients with drug-susceptible TB remain undiagnosed and a staggering percentage (˜85%) of patients with MDR-TB remain undiagnosed (WHO Global Report 2011). Of the people diagnosed with TB, less than 3% are tested to determine the pattern of drug resistance (Chaisson 2012). In addition to drug resistance, another major challenge is the accurate detection of smear-negative disease which disproportionately occurs in HIV-positive people with TB (Harries 2004).

Accurate and rapid detection of TB, including smear-negative TB and drug resistant-TB, are critical for improving patient outcomes (increased cure and decreased mortality, additional drug resistance, treatment failure, and relapse) and decreasing TB transmission. Mycobacterial culture is generally considered the best available reference standard for TB diagnosis and is the first step in detecting drug resistance. However, this is a relatively complex and slow procedure. Solid culture typically takes four to eight weeks for results and liquid culture, though more rapid than solid culture, takes days for results. Liquid culture is, however, more prone to contamination (WHO Policy Framework 2010). In addition, culture requires specialized laboratories and highly skilled staff. In 2010, WHO endorsed a novel, rapid, automated, cartridge-based nucleic acid amplification test (NAAT), the Xpert® MTB/RIF assay (Cepheid, Sunnyvale, USA) (hereafter referred to as Xpert), that can simultaneously detect TB and rifampicin resistance (WHO Policy Xpert 2011), WHO recommends that Xpert be used as the initial diagnostic test in individuals suspected of MDR-TB or HIV-associated TB. If Xpert detects rifampicin resistance in patients considered at risk of MDR-TB, an appropriate MDR-TB regimen should be started while additional sputum specimens are obtained for culture and drug susceptibility testing. Subsequent testing will confirm the presence of rifampicin resistance and enable testing for drug resistance to isoniazid and other first-line drugs and second-line drugs. Ideally, Xpert should be used at the district or subdistrict health facility level (WHO Policy Xpert 2011).

Target condition being diagnosed

Tuberculosis

TB is caused by the bacterium Mycobacterium tuberculosis and is spread from person to person through the air. TB most commonly affects the lungs (pulmonary TB), but may affect any organ or tissue, such as the brain or bones, outside of the lungs (extrapulmonary TB). Signs and symptoms of pulmonary TB include cough for at least two weeks, fever, chills, night sweats, weight loss, haemoptysis (coughing up blood), and fatigue. Signs and symptoms of extrapulmonary TB depend on the site of disease. TB treatment regimens must contain multiple drugs to which the organisms are sensitive to be effective. The treatment of MDR-TB is complex, usually requiring two years or more of therapy and drugs that are less potent and more toxic than the drugs used to treat drug-susceptible TB. International guidelines for TB treatment are issued by WHO and regularly updated. Current WHO guidelines on TB treatment are based on evidence assessed according to the GRADE (Grading of Recommendations Assessment, Development and Evaluation) approach for developing health care recommendations (Guyatt 2011; WHO Guidelines Drug-resistant TB 2011; WHO Guidelines TB Treatment 2010).

Rifampicin resistance

Rifampicin acts by inhibiting bacterial DNA-dependent RNA polymerase, encoded by the RNA polymerase gene (rpoB) (Hartmann 1967). Rifampicin resistance has mainly been associated with mutations in a limited region of the rpoB gene (Telenti 1993). Rifampicin resistance may occur alone or in association with resistance to isoniazid and other drugs. In high MDR-TB settings, the presence of rifampicin resistance alone may serve as a proxy for MDR-TB (WHO Rapid Implementation 2011). Patients with drug-resistant TB can transmit the infection to others.

Index test(s)

Xpert is an automated polymerase chain reaction (PCR) test (molecular test) utilizing the GeneXpert® platform (Blakemore 2010; Cepheid 2009; Helb 2010). Xpert is a single test that can both detect M. tuberculosis complex and rifampicin resistance within two hours after starting the test, with minimal hands-on technical time. Unlike conventional nucleic acid amplification tests (NAATs), Xpert is unique because sample processing and PCR amplification and detection are integrated into a single self-enclosed test unit, the GeneXpert cartridge. Following sample loading, all steps in the assay are completely automated and self-contained. In addition, the assay's sample reagent, used to liquefy sputum, has potent tuberculocidal (the ability to kill TB bacteria) properties and so largely eliminates biosafety concerns during the test procedure (Banada 2010). These features allow the technology to be taken out of a reference laboratory and used nearer to the patient (Small 2011). Xpert requires an uninterrupted and stable electrical power supply, temperature control, and yearly calibration of the cartridge modules (WHO Rapid Implementation 2011).

The test procedure may be used directly on clinical specimens, either raw sputum samples or sputum pellets (also called sputum sediment), samples created after decontaminating and concentrating the sputum (Blakemore 2010). In both cases, the test material is combined with the assay sample reagent, mixed by hand or vortex, and incubated at room temperature for 15 minutes. After the incubation step, 2 mL of the treated sample are transferred to the cartridge and the run initiated (Helb 2010).

Xpert's limit of detection, "the lowest number of colony forming units per sample that can be reproducibly distinguished from negative samples with 95% confidence" (Cepheid 2009), is 5 genome copies of purified DNA per reaction or 131 colony forming units per mL in M. tuberculosis spiked sputum (Helb 2010). In comparison, to see TB bacilli by microscopic examination requires at least 10,000 bacilli per mL of sputum (Toman 2004). Xpert detects both live and dead bacteria (Miotto 2012).

Xpert uses molecular beacon technology to detect rifampicin resistance. Molecular beacons are nucleic acid probes that recognize and report the presence or absence of the normal, rifampicin-susceptible, 'wild type' sequence of the rpoB gene of TB. Five different coloured beacons are used, each covering a separate nucleic acid sequence within the amplified rpoB gene. When a beacon binds to the matching sequence, it fluoresces or 'lights up', which indicates the presence of one of the gene sequences that is characteristic of rifampicin-susceptible TB. Failure of the beacon to bind or delayed binding to the matching sequence indicates potential rifampicin resistance. The number and timing of detection (when the fluorescent signal rises above a pre-determined baseline cycle threshold) of positive beacons as well as results of sample processing controls allows the test to distinguish among the following results: 'No TB; 'TB detected, rifampicin resistance detected'; 'TB detected, no rifampicin resistance detected'; and an 'invalid result' (Figure 1). As mentioned, a single Xpert run will provide both detection of TB and detection of rifampicin resistance. One cannot deselect testing for rifampicin resistance and only run the assay for TB detection, although it is possible for the laboratory to omit results for rifampicin resistance when reporting to the healthcare provider.

Readout of Xpert MTB/RIF assay for a TB positive, rifampicin-susceptible specimen. Courtesy: Karin Weyer, The WHO STOP TB Department.

Since Xpert was released, there have been four generations of the test involving different software and cartridge combinations. Studies using the first three generations (G1, G2, and G3 cartridges) are included in this systematic review. A newer cartridge, G4, to be used with software version 4.0 or higher, has been released and is now included in all Xpert kits (personal communication; Ellen Jo Baron, Cepheid, 26 June 2012). Studies using G4 and newer versions of the assay will be included in updates of this review.

Clinical pathway

Patients suspected of having pulmonary TB or MDR-TB.

Prior test(s)

For TB detection, Xpert could be used as an initial test or as an add-on test following a negative smear microscopy result.

Role of index test(s)

Consistent with WHO recommendations (WHO Policy Xpert 2011), we were interested in the following purposes for testing:

I. Xpert for TB detection

A. Xpert used as an initial test replacing smear microscopy in a population unselected by smear status

B. Xpert used as an add-on test following a negative smear microscopy result

II. Xpert for rifampicin resistance detection

A. Xpert used as an initial test for rifampicin resistance replacing conventional phenotypic drug susceptibility testing as the initial test.

Xpert does not eliminate the need for subsequent culture and phenotypic drug susceptibility testing, which are required to monitor treatment progress and to detect resistance to drugs other than rifampicin.

Alternative test(s)

In this section, we describe selected alternative tests for detection of TB and rifampicin resistance. For a comprehensive review of these tests, we refer the reader to several excellent resources (Drobniewski 2012; Nahid 2012; UNITAID 2012).

Smear microscopy, the direct examination of sputum smears with Ziehl-Neelsen staining for acid-fast bacilli (TB bacteria), is the most commonly used test for TB detection in resource-limited settings (International Standards 2009). Advantages of smear microscopy include its simplicity, low cost, speed, and high specificity in high TB burden areas. In addition, smear microscopy identifies the most infectious TB patients. Smear microscopy can be performed in basic laboratories. Drawbacks of smear microscopy include the need for specialized training and its relatively low sensitivity, 50% to 60% on average. Although, the sensitivity of microscopy can be improved by approximately 10% with fluorescence (Steingart 2006), a large number of TB cases still go undiagnosed. Smear microscopy contributes little to the diagnosis of paediatric TB and does not, by definition, identify smear-negative TB which may account for 24% to 61% of all pulmonary cases in people living with HIV (Getahun 2007; Perkins 2007; Steingart 2006a). Microscopy cannot distinguish between drug-susceptible TB and drug-resistant TB.

Nucleic acid amplification tests (NAATs) are molecular systems that can detect small quantities of genetic material (DNA or RNA) from microorganisms, such as TB. A variety of molecular amplification methods are available, of which PCR is the most common. NAATs are available as commercial kits and in-house tests (based on a protocol developed in a non-commercial laboratory) and are used routinely in high-income countries for TB detection. In-house PCR is widely used in developing countries because these tests are less expensive than commercial kits. However, in-house PCR is known to produce highly inconsistent results (Flores 2005). The use of NAATs has recently been recommended as standard practice in the United States (CDC 2009). The main advantage of NAATs is that they can provide results several weeks earlier than culture (CDC 2009). Drawbacks are that these tests are often too expensive and complex for routine use by TB programmes in resource-limited settings. In addition, although the specificity of NAATs is high, some NAATs have shown variable and low sensitivity, especially in sputum smear-negative patients (Flores 2005; Greco 2006; Ling 2008a).

Loop-mediated isothermal amplification (LAMP), a molecular method for TB detection, amplifies DNA under isothermal conditions. The large quantity of DNA generated makes it possible to detect amplification and interpret the assay result by visual inspection for fluorescence or turbidity (Boehme 2007). Advantages of LAMP are that the method is rapid (results can be obtained within several hours) and highly specific for M. tuberculosis complex. In addition, LAMP can be used in areas with limited resources such as district level laboratories because it is relatively inexpensive, does not require the use of a thermal cycler, and is simple to perform (UNITAID 2012). Drawbacks include the difficulty in interpreting test results via the colorimetric change. A decision and potential policy guidance from the WHO Expert Group that reviewed the available evidence on LAMP is forthcoming (personal communication; Wayne Van Gemert, 20 June 2012).

Alternative molecular methods for drug susceptibility testing include the commercial line probe assays, INNO-LiPA Rif.TB (Innogenetics, Ghent, Belgium) and GenoType® MTBDRplus assay (Hain LifeScience GmbH, Nehren, Germany). The INNO-LiPA Rif.TB assay targets common mutations in the rpoB gene associated with rifampicin resistance while the GenoType® MTBDRplus assay also targets the common mutations in katG and inhA genes associated with isoniazid resistance in addition to the mutations in the rpoB gene (UNITAID 2012). Advantages of lIne probe assays are that they can provide a result for detection of TB and drug resistance in 1 to 2 days. Line probe assays have both high sensitivity (greater than 97%) and high specificity (greater than 99%) for the detection of rifampicin resistance alone, or in combination with isoniazid (sensitivity greater than 90%; specificity greater than 99%), on TB isolates and smear-positive sputum specimens (Ling 2008). Drawbacks are that line probe assays are expensive and must be used in reference laboratories (Nahid 2012). These tests have been endorsed by WHO (WHO Policy Line Probe Assays 2008).

Several alternative culture-based methods for TB detection and drug susceptibility testing are available, including the microscopic observation drug susceptibility (MODS) assay which is available in both a non-commercial and commercial version (Hardy Diagnostics, USA), non-commercial colorimetric redox indicator methods and the non-commercial nitrate reductase assay. MODS is used for both detection of TB and detection of resistance to rifampicin and isoniazid. The basic principle underlying MODS is that M. tuberculosis complex bacteria grow as a corded mass while most nontuberculous mycobacteria (NTM) do not. The morphology of the bacteria can be observed with an inverted microscope (Moore 2006). Colorimetric redox indicator methods use the principle of a change in the colour of a dye to indicate the growth of viable mycobacteria in the medium (Martin 2007). The nitrate reductase assay is based on the ability of M. tuberculosis to reduce nitrate to nitrite. A dye is used to indicate bacterial growth (Martin 2008). All three methods have high accuracy for detection of rifampicin resistance, are inexpensive, and are relatively rapid (results are generally available in less than 10 days). Drawbacks of these tests include biosafety requirements, the need for specialized training, and the absence of standard methods for colorimetric methods and the nitrate reductase assay. Culture-based methods also involve challenges with preparing, diluting and storing drug solutions, and a need for a consistent power supply to maintain incubator temperatures (UNITAID 2012). WHO has endorsed MODS and the nitrate reductase assay for direct drug susceptibility testing of sputum specimens and all three methods for indirect drug susceptibility testing of TB isolates grown in conventional culture (WHO Policy Noncommercial Culture 2011). WHO considers the use of these tests as an interim solution while TB programmes build capacity for molecular tests or automated liquid culture and drug susceptibility testing (WHO Policy Noncommercial Culture 2011).

Rationale

Xpert, if accurate, would provide obvious benefits for patients (earlier diagnosis and the opportunity to begin earlier, appropriate treatment) and for public health (opportunities to interrupt TB transmission), especially in developing countries. To our knowledge, at the time of writing this review, one systematic review and meta-analysis on the diagnostic accuracy of Xpert has been published (Chang 2012). However, the authors used statistical methods for meta-analysis other than the currently recommended bivariate random-effects models (Macaskill 2010).

In September 2010, the WHO Stop TB Department convened an Expert Group meeting to review the available evidence on Xpert for the purpose of formulating recommendations to guide the use of the test (WHO Policy Xpert 2011). Since that time, the evidence has rapidly accumulated and additional studies on Xpert have been published. We conducted a systematic review to synthesize this body of evidence using currently recommended methods.

Objectives

Primary objectives

Since Xpert can detect both TB and rifampicin resistance, we had two review questions with the following primary objectives:

I. Xpert for TB detection

To determine summary estimates of the diagnostic accuracy of Xpert for the diagnosis of pulmonary TB in adults

II. Xpert for rifampicin resistance detection

To determine summary estimates of the diagnostic accuracy of Xpert for detection of rifampicin resistance in adults

Setting of testing

We were interested in how Xpert performed in patients who were evaluated in peripheral laboratories or health facilities. Laboratory services for TB may be described at three levels: peripheral level (typically district or subdistrict laboratories or more decentralized peripheral microscopy centres); intermediate level (typically regional laboratories); and central level (typically national or reference laboratories) (WHO Policy Framework 2010). Diagnostic tests often perform well when initially evaluated in reference laboratories; however tests may not perform as well when they are run in settings of intended use. As mentioned above, Xpert is intended for use in laboratories or health facilities at the district or subdistrict level. Xpert is currently not intended for use at peripheral microscopy centres.

Methods

Criteria for considering studies for this review

Types of studies

We included primary studies that assessed the diagnostic accuracy of Xpert for pulmonary TB and/or rifampicin resistance. Diagnostic accuracy studies are typically cross-sectional in design. However, we also searched for randomized controlled trials (RCTs) and cohort studies. We only included studies that reported data comparing Xpert to an acceptable reference standard from which we could extract true positive (TP), true negative (TN), false positive (FP), and false negative (FN) values. Xpert could be assessed alone or together with other tests.

We excluded studies with a case-control design because these types of studies are prone to bias, in particular, studies enrolling patients with severe disease and healthy participants without disease. We also excluded studies reported only in abstracts.

Participants

Studies had to include adult or predominantly adult patients suspected of having pulmonary TB or MDR-TB, with or without HIV infection. We considered adults to be 15 years of age or older. We included studies that assessed the diagnostic accuracy of Xpert using sputum and other respiratory specimens, such as fluid obtained from bronchial alveolar lavage and tracheal aspiration. We included studies from all settings and all countries. Data on age of study participants were available for the majority of included studies. We considered it highly likely that studies that did not report age data involved all or predominantly adults for the following reasons: the vast majority of specimens evaluated with Xpert were sputum specimens and children have difficulty producing sputum; we excluded data on specimens obtained by gastric aspiration, as this specimen collection method is used mostly for investigating TB in children; we excluded studies that specifically evaluated the use of Xpert in children; and we performed a sensitivity analysis by dropping studies that did not report age data to check whether the accuracy results changed (Sensitivity analyses).

Index tests

Xpert was the index test under evaluation.

Target conditions

The target conditions were active pulmonary TB and rifampicin resistance.

Reference standards

For TB, acceptable reference standards utilized solid media: Löwenstein-Jensen, Middlebrook 7H10 or 7H11, or Ogawa media; or a commercial liquid culture system: such as BACTEC™ 460TB System or BACTEC™ MGIT™ (mycobacterial growth indicator tube) 960 Mycobacterial Detection System, BD, USA; BacT/ALERT® System, bioMérieux, France; or both solid media and a commercial liquid culture system; or VersaTREK® Mycobacteria Detection & Susceptibility, Thermo Fisher Scientific, USA.

For rifampicin resistance, the reference standards were conventional phenotypic drug susceptibility testing methods as recommended by WHO (WHO Policy DST 2008). Acceptable methods used solid media, such as Löwenstein-Jensen, Middlebrook 7H10 or 7H11, or Ogawa media and/or a commercial liquid culture system, such as BACTEC™ 460TB System or BACTEC™ MGIT™ (mycobacterial growth indicator tube) 960 Mycobacterial Detection System, BD, USA; BacT/ALERT® System, bioMérieux, France; or VersaTREK® Mycobacteria Detection & Susceptibility, Thermo Fisher Scientific, USA.

Search methods for identification of studies

We attempted to identify all relevant studies regardless of language or publication status (published, unpublished, in press, and ongoing).

Electronic searches

Vittoria Lutje, (VL) the Information Specialist from the Cochrane Infectious Diseases Group, searched the following databases on 25 September 2011 using the strategy described in Appendix 1: Cochrane Infectious Diseases Group Specialized Register; MEDLINE; EMBASE; ISI Web of Knowledge; MEDION; LILACS; BIOSIS; and SCOPUS. She also searched the metaRegister of Controlled Trials (mRCT) and the search portal of the WHO International Clinical Trials Registry Platform, to identify ongoing trials. She repeated searches on 15 December 2011. We limited all searches to 2007 onward because the development of Xpert was completed in 2009 and the first paper describing its clinical use was published electronically in 2009 (Helb 2010). VL performed the searches without language restriction.

Searching other resources

To identify additional published, unpublished, and ongoing studies, we performed the following tasks:

reviewed reference lists of included articles and review articles identified through the above methods;
contacted Cepheid, the test manufacturer;
handsearched WHO reports on Xpert;
contacted researchers at the Foundation for Innovative New Diagnostics (FIND), members of the Stop TB Partnership's New Diagnostics Working Group, and other experts in the field of TB diagnostics.

While preparing this review, the Xpert MTB/RIF Mapping Tool became available (http://xrmt.treattb.org/projects-listing2). This tool has been developed by the International Union Against Tuberculosis and Lung Disease, through the USAID-funded TREAT TB initiative, and supported by WHO. The tool allows researchers and policy makers to globally map ongoing research activities related to Xpert. We may use this tool to identify studies for updates of this review.

Data collection and analysis

Selection of studies

Two review authors (KRS and HS) independently scrutinized titles and abstracts identified by electronic literature searching to identify potentially eligible studies (screen 1). We selected any citation identified by either review author during screen 1 for full-text review. Next, we retrieved the full paper of each potentially eligible article identified in the search. Two review authors (KRS and HS) independently assessed articles for inclusion using predefined inclusion and exclusion criteria (screen 2). In screen 2, we resolved any discrepancies by discussion between the review authors, or if necessary, by decision of a third review author (MP). We maintained a list of excluded studies and their reasons for exclusion.

We named studies according to the surname of the first author and year of publication. For multicentre studies, the study-naming scheme uniquely identifies multiple study centres from within each study (Boehme 2010a; Boehme 2010b), each of which reported data separately for a distinct population at a given study site. Hence, the number of study centres exceeds the number of studies. (Please note that when cited in the text, "Boehme [year]a" refers to an overall paper, consisting of all centres).

Data extraction and management

We extracted data on the following characteristics:

author; publication year; study design; case country of residence; country income status classified by the World Bank List of Economies (World Bank 2011); clinical setting; laboratory setting;
population, age, gender, HIV status, smear status, and follow-up;
reference standard;
parameter value in the Xpert system associated with determining rifampicin resistance;
specimen collection (expectorated sputum, induced sputum)
condition of the specimen (fresh or frozen);
preparation of the specimen (processed or unprocessed);
QUADAS-2 items (Whiting 2011);
data for two-by-two tables for Xpert, including results reported as indeterminate (results reported as invalid, error, or no result);
time to diagnosis (time from specimen collection until there is an available TB result in laboratory or clinic);
time to treatment initiation (time from specimen collection until time patient starts treatment).

Whenever possible, we extracted TP, FP, FN, and TN values based on one Xpert result for one specimen provided by one patient. However, in some of the studies, the number of specimens (and Xpert results) exceeded the number of patients, suggesting that a single patient may have provided multiple specimens. We therefore compared pooled sensitivity and specificity for TB detection in all studies with pooled sensitivity and specificity in the subset of studies that provided one Xpert result based on one specimen provided by one patient (see Sensitivity analyses).

When data were available, we extracted FP and TN values for participants without TB disease by their smear and HIV status. Concerning the definition of smear positivity, as the vast majority of included studies performed Xpert in reference laboratories, we assumed these studies adhered to the revised definition of a new sputum smear-positive pulmonary TB case based on the presence of at least one acid-fast bacillus in at least one sputum sample in countries with a well functioning external quality assurance system (WHO Policy Smear-positive TB Case 2007).

We developed a standardized data extraction form and piloted the form with four studies (22%). Based upon the pilot, we finalized the form. Two review authors (KRS and HS) independently extracted data from each study using the final form. We contacted authors of studies for missing data and clarifications. We entered all data into Excel and SPSS 2006. The final data extraction form is included in Appendix 2.

Assessment of methodological quality

We appraised the quality of included studies with the Quality Assessment of Diagnostic Accuracy Studies (QUADAS-2) tool (Whiting 2011). QUADAS-2 consists of four domains: patient selection, index test, reference standard, and flow and timing. We assessed all domains for the potential for risk of bias, and, in addition, we assessed the first three domains for concerns regarding applicability. We used questions, called signalling questions, for each domain to form judgments about the risk of bias. As recommended, we first developed guidance on how to appraise each signalling question and interpret this information. Then, one review author (KRS) piloted the tool with four (22%) of the included studies. Based on experience gained from the pilot, we finalized the tool. Two review authors independently assessed the methodological quality of the included studies with the finalized tool. We presented results in the text, in graphs, and in a table. We did not generate a summary "quality score" because of problems associated with such numeric scores (Juni 1999; Whiting 2005). The domains of the QUADAS-2 tool and their interpretation are provided in Appendix 3.

Statistical analysis and data synthesis

We performed descriptive analyses for the results of the included studies using SPSS 2006 and present key study characteristics in Characteristics of included studies. We used data reported in the two-by-two tables to calculate sensitivity and specificity estimates and 95% confidence intervals (CI) for individual studies and to generate forest plots using Review Manager 5. We chose to use data that were not subject to discrepant analyses (ie unresolved data), since resolved data after discrepant analyses are a potential for risk of bias (Hadgu 2005).

We carried out meta-analyses to estimate the pooled sensitivity and specificity of Xpert separately for TB detection (I. A. and I. B) and rifampicin resistance detection (II. A.). We determined pooled estimates using an adaptation of the bivariate random-effects model (Reitsma 2005) to allow for a hierarchical structure for the two multicentre studies (Boehme 2010a; Boehme 2011a). The bivariate random-effects approach allowed us to calculate the pooled estimates of sensitivity and specificity while dealing with potential sources of variation caused by (1) imprecision of sensitivity and specificity estimates within individual studies; (2) correlation between sensitivity and specificity across studies; and (3) variation in sensitivity and specificity between studies.

We estimated all models using a Bayesian approach with non-subjective prior distributions and implemented using WinBUGS (Version 1.4.3) (Lunn 2000). Under the Bayesian approach, all unknown parameters must be provided a prior distribution that defines the range of possible values of the parameter and the likelihood of each of those values based on information external to the data. In order to let the observed data determine the final results, we chose to use low-information prior distributions over the pooled sensitivity and specificity parameters and their between-study standard deviation parameters. The model we used is summarized in the Statistical Appendix together with the WinBUGS program used to implement it (Appendix 4). Information from the prior distribution is combined with the likelihood of the observed data in accordance with Bayes Theorem to obtain a posterior distribution for each unknown parameter.

Using a sample from the posterior distribution we can obtain various descriptive statistics of interest. We estimated the median pooled sensitivity and specificity and their 95% credible intervals (CrI).The median or the 50% quantile is the value below which 50% of the posterior sample lies. We chose to report the median because the posterior distributions of some parameters may be skewed and the median would be considered a better point estimate of the unknown parameter than the mean in such cases. The 95% CrI is the Bayesian equivalent of the classical (frequentist) 95% CI. (We have indicated 95% CI for individual study estimates and 95% CrI for pooled study estimates as appropriate).The 95% CrI may be interpreted as an interval that has a 95% probability of capturing the true value of the unknown parameter given the observed data and the prior information. We also extracted estimates of the 'predicted' sensitivity and specificity in a future study together with their 95% CrIs. The predicted value gives an idea of heterogeneity at the study level. We can compare the predicted intervals to the pooled intervals to get an idea of the heterogeneity. With a large number of studies, the pooled interval may be narrow. However, if there is considerable variability in sensitivity and specificity estimates between studies, this variability will be reflected in a wide predicted interval despite the large number of studies. We generated the plots using R (version 2.15.1) (R 2008).

I. B. Xpert used as an add-on test following a negative smear microscopy result

To determine the value of Xpert as an add-on test, we estimated its sensitivity and specificity among smear-negative patients. We did this by evaluating two types of studies: 1) studies that enrolled participants selected to be predominantly smear negative by prior microscopic examination and 2) studies that enrolled unselected participants who were evaluated by both Xpert and microscopy concurrently. In the second group, we used only the data for those individuals who had a negative microscopy result. As described above, we determined pooled estimates using an adaptation of the bivariate random-effects model (Reitsma 2005).

Approach to indeterminate index test results

We excluded indeterminate test results from the analyses for determination of sensitivity and specificity for both TB detection and rifampicin resistance detection. We used a hierarchical model for a single proportion to estimate the proportion of indeterminate index test results.

Investigations of heterogeneity

I. A. TB detection

We first investigated heterogeneity through visual examination of forest plots of sensitivity and specificity. We then explored the possible influence of clinical factors by analyses of the subgroups described in the protocol. We expected the majority of studies to report TP, FP, FN, and TN values by smear status and several studies to report values by HIV status. Therefore, we fit the meta-analysis model separately within subgroups defined by smear and HIV status to examine the effects of these covariates on the pooled sensitivity and specificity. To study the impact of the remaining covariates of interest, we extended the meta-analysis model to a meta-regression model for the sake of statistical efficiency. We did this by expressing the pooled logit(sensitivity) and logit(specificity) as linear functions of a dichotomous covariate to examine the effects of individual covariates on the pooled sensitivity and specificity. The covariates considered were all dichotomous variables and related to the condition of the specimens (fresh versus frozen), preparation of the specimens (unprocessed versus processed), TB prevalence (low ≤ 30% versus high = 30%), and country income status (low-/middle-income versus high-income).

II. A. Detection of rifampicin resistance

As mentioned, there have been four versions of Xpert, G1, G2, G3, and G4 (the current version). At the time we performed this review, there were no published studies of G4. Studies included in this review used Xpert versions G1, G2, and G3. The different Xpert versions involve software and cartridge processing adjustments with consequent changes in the way the presence or absence of rifampicin resistance is determined in the Xpert system. One of several factors influencing the determination of rifampicin resistance in the earlier Xpert versions (those included in this review) was a parameter value, also called delta cycle threshold cutoff adjusted to provide the optimum tradeoff between sensitivity for detecting 'rifampicin resistant' samples and specificity for detecting 'rifampicin susceptible' samples. A parameter value of 3.5 was incorporated in the algorithm for Xpert version G1, and a parameter value of 5, in the algorithm for Xpert versions G2 and G3. We investigated the influence of these two parameter values (3.5 and 5) on sensitivity and specificity by including a dichotomous covariate in the regression model.

We also explored the influence of rifampicin resistance prevalence on the pooled sensitivity and specificity estimates by including a dichotomous covariate, high prevalence = 15% and low prevalence ≤ 15%, in the regression model.

Sensitivity analyses

We performed sensitivity analyses by limiting inclusion in the meta-analysis to: 1) studies that provided data by age that explicitly met the age criterion for participants; 2) studies where consecutive patients were selected; 3) studies where a single specimen yielded a single Xpert result for a given patient; and 4) studies that explicitly represented the use of Xpert for the diagnosis of patients suspected of having TB.

Assessment of reporting bias

We chose not to carry out formal assessment of publication bias using methods such as funnel plots or regression tests because such techniques have not been found to be helpful for diagnostic test accuracy studies (Macaskill 2010). However, Xpert is produced by only one manufacturer and, being a new test for which there has been considerable attention and scrutiny, we believe reporting bias was minimal.

Other analyses

NTM

NTM, such as M. avium complex and M. intracellulare, comprise a multi-species group of human pathogens that are ubiquitous in water and soil. NTM can cause severe pulmonary and other diseases that share clinical signs with TB but are treated differently from TB, including drug-resistant TB. People living with HIV with severe immunosuppression are particularly vulnerable to infections caused by NTM (Gopinath 2010). NTMs were not mentioned in the majority of studies, and, when reported, were usually excluded from specificity determinations. We, therefore, summarized separately data for NTM by determining the percent of false-positive Xpert results in samples that grew NTMs (see Other analyses: NTM).

Results

Results of the search

We performed the initial electronic search on 25 September 2011 and we identified 139 titles. We added five titles through reference checking and correspondence with experts in the field. After we removed duplicates, 137 titles remained of which we excluded 78 titles based on a review of title and abstract. We retrieved full-text articles for 59 citations, of which we excluded 41 for the following reasons: abstract (nine studies); case control design (one study); cost-effectiveness analysis (one study); duplicate title (one study); editorials or comments (15 studies); evaluation of Xpert for extrapulmonary TB (five studies) or paediatric TB (one study); narrative reviews (six studies); and technical aspects (two studies) (Characteristics of excluded studies describes selected papers). We performed an updated search on 15 December 2011 that yielded 81 titles, all of which had been identified during the previous search or were ineligible based on title or abstract. Thus, we included 18 relevant studies in this review, (Figure 2). Of the total 18 studies, two were international multicentre studies (Boehme 2010a; Boehme 2011a) carried out at five and six study centres, respectively. The two studies by Boehme involved different patients. For Boehme 2010a and Boehme 2011a descriptive results and methodological quality were presented at the study centre level. Meta-analysis results were presented at the study level. One other study, conducted at three sites, presented accuracy data for the three sites combined and was considered as a single study and a single study centre (Marlowe 2011). Hence there were 27 study centres in the review.

Methodological quality of included studies

Figure 3 shows the overall quality of the 27 study centres included in the review. In the patient selection domain, we considered 20 study centres (74%) to be at low risk of bias because participants were enrolled consecutively. We considered the majority of the remaining study centres to be at high risk of bias, mainly because the sampling method was by convenience. With regard to applicability (patient characteristics and setting), we judged six study centres (one study) to be of low concern because the study centres in this study evaluated Xpert in decentralized laboratories associated with health clinics and provincial hospitals (Boehme 2011a). The remaining study centres in the review ran Xpert in reference laboratories, thus their results may not be generalizable to other settings that lack specialized laboratory infrastructure and highly trained personnel. We also noted that no study centre used Xpert at the point of care in a health facility outside a laboratory. In the index test domain, we considered all study centres to be at low concern for both risk of bias and applicability. In the reference standard domain, we judged 23 study centres (85%) to be at low risk of bias for TB and 24 study centres (89%) to be at low risk of bias for rifampicin resistance. In the reference standard domain, we judged Hanif 2011 to be at high risk of bias for TB as the target condition (objective I) because blinding was not reported, but low risk of bias for rifampicin resistance as the target condition (objective II) since this study used BACTEC 460, a system that provides an automated test result. We judged applicability to be of low concern for all studies in the reference standard domain. In the flow and timing domain, we considered 23 study centres (85%) to be of low concern for risk of bias because all patients were accounted for in the analysis and information about indeterminate results was provided. The quality assessment results for the individual study centres can be found in Figure 4. Note that we had nearly complete information for all study centres.

Risk of bias and applicability concerns graph: review authors' judgements about each domain presented as percentages across the 27 included study centres (18 studies). The reference standard domain pertains to TB as the target condition. See text for the reference standard pertaining to rifampicin resistance.

Risk of bias and applicability concerns summary: review authors' judgements about each domain for each included study centre.

Findings

Eighteen studies including 7816 participants (median number in the studies 117, Interquartile range (IQR) 93, 214), evaluated Xpert for TB detection. The prevalence of TB in the 18 studies ranged from 18.3% (Lawn 2011) to 100% (Friedrich 2011), median 37.4% (IQR 29.4, 59.8). Of the total 18 studies, 11 studies including 2340 participants provided data for 2 x 2 tables for rifampicin resistance detection. Of the remaining studies, four studies reported that all specimens were found to be drug sensitive (no rifampicin resistant specimens) (Ciftci 2011; Hanif 2011; Marlowe 2011; Rachow 2011); two studies provided data jointly for pulmonary and extrapulmonary specimens (Miller 2011; Moure 2011); and one study did not report information on rifampicin resistance (Helb 2010). The prevalence of rifampicin resistance in the 11 studies ranged from 0.8% (Teo 2011) to 29.4% (Scott 2011), median 7.3% (IQR 3.0, 19.6). All studies used a cross-sectional study design relevant to determining the diagnostic accuracy of Xpert. The majority of studies used expectorated (coughed-up) sputum not induced sputum.

Characteristics of included studies presents key characteristics for the 27 study centres. Nineteen study centres (70.4%) (10 studies (55.6%)) were located in low-income or middle-income countries. In the countries represented by the 27 study centres, TB incidence rates per 100,000 population ranged from 4.1 (USA) to 981 (South Africa). The percent MDR-TB among new TB cases ranged from 0.9% (Greece and South Africa, Cape Town) to 22.3% (Azerbaijan) and among retreatment cases, ranged from 0% (Tanzania) to 55.8% (Azerbaijan) (Wright 2009; WHO Drug Resistance 2008; WHO M/XDR-TB 2010; Zignol 2012).

I. A. TB detection, Xpert used as an initial test replacing smear microscopy

Forest plots of Xpert sensitivity and specificity for TB detection are presented for the total 18 studies (27 study centres) in Figure 5. Sensitivity estimates varied from 58% to 100% and specificity estimates, from 94% to 100%. We included fifteen of the total 18 studies, including 7517 participants, in this meta-analysis. We excluded one study because it preferentially enrolled smear-positive patients (Friedrich 2011) and two studies because they preferentially enrolled smear-negative patients (Ioannidis 2011; Moure 2011). The pooled median sensitivity and specificity were 88% (95% CrI 83% to 92%) and 98% (95% CrI 97% to 99%), respectively, (Table 1). The predicted sensitivity and specificity for Xpert for TB detection were 88% (95% CrI 66% to 97%) and 98% (95% CrI 92% to 100%), respectively, the wider 95% CrIs around the predicted values suggesting some variability between studies particularly in sensitivity. Figure 6 presents the pooled and predicted sensitivity and specificity estimates together with the credible and prediction regions for Xpert for TB detection. The summary point appears close to the upper left-hand corner of the plot, suggesting high accuracy of Xpert for TB detection. The 95% credible region around the summary (pooled) value of sensitivity and specificity, the region that contains likely combinations of the pooled sensitivity and specificity, is relatively narrow. The 95% prediction region is wider, displaying more uncertainty as to where the likely values of sensitivity and specificity might occur for individual studies.

Forest plots of Xpert sensitivity and specificity for TB detection, Xpert used as an initial test replacing smear microscopy. The individual studies are ordered by decreasing sensitivity. TP = True Positive; FP = False Positive; FN = False Negative; TN = True Negative. Between brackets are the 95% CI of sensitivity and specificity. The figure shows the estimated sensitivity and specificity of the study (blue square) and its 95% CI (black horizontal line). Xpert specificity could not be estimated in one study.

Table 1.

Xpert MTB/RIF assay for detection of TB and rifampicin resistance

Type of analysis (Number of studies)	Pooled sensitivity Median (95% credible interval)	Pooled specificity Median (95% credible interval)	Predicted sensitivity Median (95% credible interval)	Predicted specificity Median (95% credible interval)
Xpert used as an initial test for TB detection replacing microscopy (15)*	88% (83, 92)	98% (97, 99)	88% (66, 97)	98% (92, 100)

Xpert used as an add-on test for TB detection following a negative smear microscopy result (14)	67% (58, 74)	98% (97, 99)	66% (40, 86)	98% (93, 100)

Xpert used as an initial test for rifampicin resistance detection replacing conventional drug susceptibility testing as the initial test (11)	94% (87, 97)	98% (97, 99)	94% (75, 99)	98% (91, 100)

Covariate	Sensitivity Median (95% credible interval)	Specificity Median (95% credible interval)
Smear status

Smear +	98% (97, 99)	***

Smear -	68% (59, 75)	98% (97, 99)

Difference (Smear+ minus Smear-)	31% (23, 39)	**

P (Smear+ = Smear-)	1.00	**

HIV status

HIV+	80% (67, 88)	97% (93, 99)

HIV-	89% (81, 94)	99% (96, 99)

Difference (HIV+ minus HIV-)	-9% (-22, 3)	-1% (-5, 2)

P (HIV+ = HIV-)	0.06	0.21

Condition of specimen

Fresh	88% (80, 93)	99% (98, 100)

Frozen	85% (77, 91)	97% (95, 99)

Difference (Fresh minus Frozen)	3% (-7, 13)	2% (0.1, 4)

P (Fresh = Frozen)	0.73	0.98

Specimen preparation

Unprocessed	92% (87, 96)	99% (97, 99)

Processed	85% (79, 90)	98% (96, 99)

Difference (Unprocessed minus Processed)	7% (0.2, 14)	0.8% (-1, 3)

P (Unprocessed = Processed)	0.98	0.84

TB prevalence

High (= 30%)	89% (84, 93)	98% (96, 99)

Low (≤ 30%)	86% (77, 92)	99% (97, 99)

Difference (High minus Low)	3% (-5, 12)	-0.4% (-2, 1)

P (High = Low)	0.80	0.29

Country income level

High-income	92% (86, 96)	98% (95, 99)

Low- and middle-income	85% (79, 90)	99% (97, 99)

Difference (High-income minus Low- and middle-income)	6% (-1, 14)	-1% (-3, 1)

P (High-income = Low- and middle-income)	0.96	0.23

Covariate	Sensitivity Median (95% credible interval)	Specificity Median (95% credible interval)
Parameter value (delta cycle threshold cutoff)

Parameter value 5	94% (86, 97)	98% (96, 99)

Parameter value 3.5	96% (81, 100)	100% (98, 100)

Difference (Parameter value 5 minus Parameter value 3)	-3% (-10, 11)	-2% (-4, -0.3)

P (Parameter value 5 = Parameter value 3)	0.26	0.01

Rifampicin resistance prevalence

High (= 15%)	94% (85, 98)	98% (95, 99)

Low (≤ 15%)	93% (80, 99)	98% (96, 99)

Difference (High minus Low)	0.4% (-8, 13)	-0.4% (-4, 2)

P (High = Low)	0.54	0.34

Review question: What is the diagnostic accuracy of Xpert MTB/RIF assay for detection of pulmonary TB and detection of rifampicin resistance?
Patients/population: Adults suspected of having pulmonary TB or MDR-TB (for TB detection); confirmed TB cases (for rifampicin resistance detection)
Purpose: TB detection: Xpert MTB/RIF assay used as an initial test replacing microscopy and used as an add-on test following a negative smear microscopy result. Rifampicin resistance detection: Xpert MTB/RIF assay as an initial test replacing conventional phenotypic drug susceptibility testing
Setting: Basic laboratories and primary health facilities (peripheral health services level)
Index test: Xpert MTB/RIF assay
Importance: Compared with culture and conventional drug susceptibility testing, Xpert MTB/RIF assay could have considerable advantages for scaling up programmatic management of TB by offering rapid diagnosis nearer to the point of care, standardized testing, potential for high throughput, and fewer requirements for laboratory biosafety
Reference standards: TB: solid or liquid culture; rifampicin resistance: phenotypic drug susceptibility testing
Studies: Cross-sectional or cohort

Diagnostic accuracy for TB detection

Type of analysis	Effect (95% credible interval)	No. of participants (studies)	What do these results mean given 5% prevalence of TB among individuals suspected of having pulmonary TB?	What do these results mean given 15% prevalence of TB among individuals suspected of having pulmonary TB?	What do these results mean given 30% prevalence of TB among individuals suspected of having pulmonary TB?

TB detection, Xpert used as an initial test replacing microscopy	Pooled median sensitivity 88% (83, 92) and pooled median specificity 98% (97, 98)	7517 (15)	With a prevalence of 5%, 50/1000 individuals will have pulmonary TB. Of these, 44 (TP) will be identified; 6 (FN) will be missed. Of the 950 individuals without TB, 931 (TN) will not be treated; 19 (FP) may be unnecessarily treated	With a prevalence of 15%, 150/1000 individuals will have pulmonary TB. Of these, 132 (TP) will be identified; 18 (FN) will be missed. Of the 850 individuals without TB, 833 (TN) will not be treated; 17 (FP) may be unnecessarily treated	With a prevalence of 30%, 300/1000 individuals will have pulmonary TB. Of these, 264 (TP) will be identified; 36 (FN) will be missed. Of the 700 individuals without TB, 686 (TN) will not be treated; 14 (FP) may be unnecessarily treated

TB detection, Xpert used as an add-on test following a negative smear microscopy result	Pooled median sensitivity 67% (58, 74) and pooled median specificity 98% (97, 98)	5719 (14)	With a prevalence of 5%, 50/1000 individuals will have pulmonary TB. Of these, 34 (TP) will be identified; 16 (FN) will be missed. Of the 950 individuals without TB, 931 (TN) will not be treated; 19 (FP) may be unnecessarily treated	With a prevalence of 15%, 150/1000 individuals will have pulmonary TB. Of these, 101 (TP) will be identified; 49 (FN) will be missed. Of the 850 individuals without TB, 833 (TN) will not be treated; 17 (FP) may be unnecessarily treated	With a prevalence of 30%, 300/1000 individuals will have pulmonary TB. Of these, 201 (TP) will be identified; 99 (FN) will be missed. Of the 700 individuals without TB, 686 (TN) will not be treated; 14 (FP) may be unnecessarily treated

Smear-positive, culture-positive subgroup, within- study comparison	Pooled median sensitivity 98% (97, 99); specificity of Xpert could not be estimated in these studies	1735 (15)	With a prevalence of 5%, 50/1000 individuals will have pulmonary TB. Of these, 49 (TP) will be identified; 1 (FN) will be missed	With a prevalence of 15%, 150/1000 individuals will have pulmonary TB. Of these, 147 (TP) will be identified; 3 (FN) will be missed	With a prevalence of 30%, 300/1000 individuals will have pulmonary TB. Of these, 294 (TP) will be identified; 6 (FN) will be missed

Smear-negative, culture-positive subgroup	Pooled median sensitivity 68% (59, 75) and pooled median specificity 98% (97, 99)	5771 (15)	With a prevalence of 5%, 50/1000 individuals will have pulmonary TB. Of these, 34 (TP) will be identified; 16 (FN) will be missed. Of the 950 individuals without TB, 931 (TN) will not be treated; 19 (FP) may be unnecessarily treated	With a prevalence of 15%, 150/1000 individuals will have pulmonary TB. Of these, 102 (TP) will be identified; 48 (FN) will be missed. Of the 850 individuals without TB, 833 (TN) will not be treated; 17 (FP) may be unnecessarily treated	With a prevalence of 30%, 300/1000 individuals will have pulmonary TB. Of these, 204 (TP) will be identified; 96 (FN) will be missed. Of the 700 individuals without TB, 686 (TN) will not be treated; 14 (FP) may be unnecessarily treated

HIV-positive subgroup	Pooled median sensitivity 80% (67, 88) and pooled median specificity 97% (93, 99)	1163 (4)	With a prevalence of 5%, 50/1000 individuals will have pulmonary TB. Of these, 40 (TP) will be identified; 10 (FN) will be missed. Of the 950 individuals without TB, 922 (TN) will not be treated; 28 (FP) may be unnecessarily treated	With a prevalence of 15%, 150/1000 individuals will have pulmonary TB. Of these, 120 (TP) will be identified; 30 (FN) will be missed. Of the 850 individuals without TB, 825 (TN) will not be treated; 25 (FP) may be unnecessarily treated	With a prevalence of 30%, 300/1000 individuals will have pulmonary TB. Of these, 240 (TP) will be identified; 60 (FN) will be missed. Of the 700 individuals without TB, 679 (TN) will not be treated; 21 (FP) may be unnecessarily treated

HIV-negative subgroup	Pooled median sensitivity 89% (81, 94) and pooled median specificity 99% (96, 99)	1981 (4)	With a prevalence of 5%, 50/1000 individuals will have pulmonary TB. Of these, 45 (TP) will be identified; 5 (FN) will be missed. Of the 950 individuals without TB, 941 (TN) will not be treated; 9 (FP) may be unnecessarily treated	With a prevalence of 15%, 150/1000 individuals will have pulmonary TB. Of these, 134 (TP) will be identified; 16 (FN) will be missed. Of the 850 individuals without TB, 842 (TN) will not be treated; 8 (FP) may be unnecessarily treated	With a prevalence of 30%, 300/1000 individuals will have pulmonary TB. Of these, 267 (TP) will be identified; 33 (FN) will be missed. Of the 700 patients individuals without TB, 693 (TN) will not be treated; 7 (FP) may be unnecessarily treated

Diagnostic accuracy for detection of rifampicin resistance

Type of analysis	Effect (95% credible interval)	No. of participants (studies)	What do these results mean given 2% prevalence of rifampicin resistance among individuals with TB?	What do these results mean given 15% prevalence of rifampicin resistance among individuals with TB?	What do these results mean given 30% prevalence of rifampicin resistance among individuals with TB?

Rifampicin resistance detection, Xpert used as an initial test replacing conventional drug susceptibility testing	Pooled median sensitivity 94% (87, 97) and pooled median specificity 98% (97, 99)	2340 (11)	With a prevalence of 2%, 20/1000 will have rifampicin resistance. Of these, 19 (TP) will be identified; 1 (FN) will be missed. Of the 980 patients with TB sensitive to rifampicin, 960 (TN) will not be treated; 20 (FP) may be unnecessarily treated	With a prevalence of 15%, 150/1000 will have rifampicin resistance. Of these, 141 (TP) will be identified; 9 (FN) will be missed. Of the 850 patients with TB sensitive to rifampicin, 833 (TN) will not be treated; 17 (FP) may be unnecessarily treated	With a prevalence of 30%, 300/1000 will have rifampicin resistance Of these, 282 (TP) will be identified; 18 (FN) will be missed. Of the 700 patients with TB sensitive to rifampicin, 686 (TN) will not be treated; 14 (FP) may be unnecessarily treated

Study and year of publication	Time to TB detection	Time to detection of rifampicin resistance	Time to treatment initiation
Boehme 2011a; Boehme 2011b; Boehme 2011c; Boehme 2011d; Boehme 2011e; Boehme 2011f	Median (IQR) Xpert: 0 days (0, 1) Smear: 1 day (0, 1) Solid culture: 30 days (23, 43) Liquid culture: 16 days (13-21)	Median (IQR) Xpert: 1 day (0, 1) Line probe assay (direct testing): 20 days (10, 16) Phenotypic DST: 106 days (30, 124)	Median (IQR) Smear-, culture+ TB Before Xpert introduced: 56 days (39, 81) After Xpert introduced: 5 days (2, 8)

Helb 2010	Xpert (1 sample): 1 hour 55 minutes Xpert (8 samples processed together): 2 hours

Lawn 2011	Median* (IQR) Xpert: 4 days (3, 6) Smear: 3 days (2, 5) Liquid culture (smear+): 12 days (10,14) Liquid culture (smear-): 20 days (17, 27)	Xpert: mean 2 days MTBDRplus assay (with positive culture isolate): mean 21 days Phenotypic DST (liquid culture): mean 40 days

Marlowe 2011	Xpert: hands-on time was 5 minutes; run time was less than 2 hours

Miller 2011	Xpert: hands-on time was 15 minutes: run time was 113 minutes

Moure 2011	Xpert: total time of 2 hours

Rachow 2011	Xpert: within two hours

Zeka 2011**	Xpert (routine practice): 3-24 hours Liquid culture: 19 days mean (range 3-42 days)

ID

ID substudy (for study centres: a, b, c, etc)

First Author

Corresponding author & email

Was author contacted?	1 – Yes 2 – No If yes, dates(s)

Title

Year (of publication)

Year (study start date)

Language	1 – English 2 – Other If other, specify:

Was the study conducted without industry sponsorship?	1 – Yes 2 – No 9 – Unk/NR

If industry sponsorship was present, select one item from the list	Select one: answers ordered from least to most industry involvement: Donation of Xpert® for use in study Xpert® at a special preferred price Receipt of educational support, grants, or speaking fees Financial relationship - author is employee/consultant/stockholder Involvement in design, analysis, or manuscript production

For TB detection, what reference standard(s) was used?	1 – Solid Culture (specify 1a) 2 – Liquid Culture (specify 2a) 3 – Both Solid & Liquid Culture (specify 1a & 2a) 9 – Unk/NR 1a - Solid Culture LJ 7H10 7H11 Other 2a – Liquid Culture MGIT 960 Bactec 460 Other

For rifampicin resistance detection, what reference standard(s) was used?	1 – Solid Culture (specify 1a) 2 – Liquid Culture (specify 2a) 3 – Both Solid & Liquid Culture (specify 1a & 2 a) 9 – Unk/NR 1a - Solid Culture LJ 7H10 7H11 Other Specify method, eg, proportion 2a – Liquid Culture MGIT 960 Bactec 460 Other

Clinical setting; describe as written in the paper	1 – Outpatient 2- Inpatient 3 – Both out- and in-patient 4 – Other, specify 5 – Laboratory 9 – Unk/NR Describe as in paper:

Laboratory services level Specify type of laboratory	1- Central (Reference) 2 - Intermediate (Regional) 3 - Peripheral (Microscopy centre, health clinic, provincial hospital) 4- Other, specify

Was Xpert run outside of a laboratory, eg, clinic?	1 - Yes 2 - No

Country where study was conducted

Country World Bank Classification	1 – Middle/Low 2 – High 3 – Both middle/low and high

Study design	1 – Randomized Trial 2 – Cross-sectional 3 – Cohort 4 – Other, specify 9 – Unk/NR If other, specify:

Participant selection	1 – Consecutive 2 – Random 3 – Convenience 7 – Other 9 – NR/Unclear

Direction of study data collection	1 – Prospective 2 – Retrospective 9 – Unk/NR

Comments about study design

Number after screening by exclusion & inclusion criteria	_____ 9 – Unk/NR

Number included in analysis (# screened - # withdrawals)	_____ 9 – Unk/NR

Unit of analysis	1 – One specimen per patient 2 – Multiple specimens per patient 3 - Unknown number of specimens per patient 9 – NR/Unclear Describe as in paper, if unclear:

Prior testing by microscopy for triage	1 – Yes 2 – No 9 – Unk/NR

Did the study include patients with previous TB history?	1 – Yes 2 – No 9 – Unk/NR

If so, what is the percentage?	% Specify numerator/denominator

HIV status of participants	0 – HIV - 1 – HIV + 2 – Both HIV+/- 9 – Unk/NR

If HIV-positive participants included, what is the percentage?	% Specify numerator/denominator

Specimen collection (may include expectorated sputum, induced sputum, bronchial alveolar lavage (BAL), tracheal aspiration)	1 – All expectorated 2 – All induced 3 – All BAL 4 – Multiple types 5 – Other 9 – Unk/NR If 4 or 5, describe and record numbers:

Were Xpert sample and culture obtained from same specimen?	1 – Yes 2 – No 9 – Unk/NR

Number of cultures used to exclude TB	1 – One 2 – Two 3 – Three 4 – Four 5 – Other, specify 9 - Unk/NR Specify, if = 4: NOTES:

Pre-treatment processing procedure for Xpert	1 – None 2 – NALC-NaOH 3 – NaOH (Petroff) 4 – Other 9 – Unk/NR

Was microscopy used	1 – Yes 2 – No 9 – Unk/NR

Type of microscopy used	1 – Ziehl-Neelsen 2 – FM 9 – Unk/NR

Smear type	1 – Direct 2 – Concentrated (processed) 9 – Unk/NR

Minimum number of sputum specimens used to determine smear positivity	1 – One 2 – Two 3 – Three 4 – =3 9 – Unk/NR

How was a positive smear defined? (if guideline referenced, look up guideline)	≥____bacilli per____ high power fields 9 – Unk/NR * complete both fields

For Xpert specimen, what was the condition of the specimen when tested?	1 – Fresh 2 – Frozen 9 – Unk/NR

If fresh, specify:	1 – Tested after storage at room temperature or refrigerated w/in 48 hours of collection 2 – Tested after storage at room temperature or refrigerated = 48 hours of collection 9 – Unk/NR

If frozen, specify:	1 – Tested after frozen < 1 year of storage 2 – Tested frozen ≥ 1 year of storage 9 – Unk/NR

Version of software for test interpretation	1 – Version 1 2 – Version 2 3 – Version 3 4 - Version 4 9 – Unk/NR

Enter percentage contaminated cultures, if provided: # of contaminated culture Total # cultures performed	_____________ 9 – Unk/NR

Were indeterminate results reported for Xpert for TB detection?	1 – Yes 2 – No 9 – Unk/NR

Were indeterminate results reported for Xpert for rifampicin resistance detection?	1 – Yes 2 – No 9 – Unk/NR

Were patient important outcomes evaluated?	1 – Yes 2 – No 9 – Unk/NR

Time to diagnosis	Xpert: Culture: 9 – Unk/NR

Time to treatment initiation	Xpert: Culture: 9 – Unk/NR

Other patient outcomes	Specify:

RIF resistance detection		Confirmed rifampicin resistance

		Yes	No	Total
Xpert result	Yes (resistant)

	No (susceptible)

	Total

	Indeterminate

Discrepant analysis		Comments:

Criteria	Number
Xpert+/culture - baseline

Deemed TB after further evaluation

Percent found to be TB on discrepant analysis

Study characteristics

Patient sampling	Prospective study with consecutive enrolment of participants; site in a multicentre study

Patient characteristics and setting	Presenting signs and symptoms: Persistent productive cough for ≥ 2 weeks Age: median 37 years; range 20 to 69 years Sex, female: 0% HIV infection: 4.7% History of TB: 54.6% Sample size: 216 Clinical setting: Special treatment facility for prisoners, high MDR-TB setting Laboratory: Reference laboratory Country: Azerbaijan World Bank Income Classification: Middle-/low-income TB incidence rate: 110 per 100,000 MDR-TB prevalence: Percent MDR-TB among new TB cases = 22.3% and among retreatment cases = 55.8% (Source: survey in Baku, 2007) TB prevalence in study centre: 68.1%

Index tests	Index: Xpert MTB/RIF assay Specimen condition: Fresh Specimen preparation: Unprocessed Parameter value for rifampicin resistance: 3.5

Target condition and reference standard(s)	Target condition: Pulmonary TB Reference standard for pulmonary TB: Löwenstein-Jensen culture and MGIT 960 Target condition: Rifampicin resistance Reference standard for rifampicin resistance: Proportion method on Löwenstein-Jensen media

Flow and timing

Comparative

Notes	Women were not included, but otherwise considered representative spectrum Data for one specimen per patient were provided by the study author

Methodological quality

Item	Authors' judgement	Risk of bias	Applicability concerns

DOMAIN 1: Patient Selection

Was a consecutive or random sample of patients enrolled?	Yes

Was a case-control design avoided?	Yes

Did the study avoid inappropriate exclusions?	No

			High

DOMAIN 2: Index Test All tests

Were the index test results interpreted without knowledge of the results of the reference standard?	Yes

If a threshold was used, was it pre-specified?	Yes

			Low

DOMAIN 3: Reference Standard

Is the reference standards likely to correctly classify the target condition?	Yes

Were the reference standard results for TB detection interpreted without knowledge of the results of the index test?	Yes

Were the reference standard results for rifampicin resistance detection interpreted without knowledge of the results of the index test?	Yes

			Low

DOMAIN 4: Flow and Timing

Was there an appropriate interval between index test and reference standard?	Yes

Did all patients receive the same reference standard?	Yes

Were all patients included in the analysis?	Yes

Study characteristics

Patient sampling	Prospective and retrospective study with enrolment of participants by convenience

Patient characteristics and setting	Presenting signs and symptoms: Not reported Age: Not stated Sex, female: Not stated HIV infection: Not stated History of TB: Not stated Sample size: 89 Clinical setting: Laboratory-based evaluation of respiratory specimens (predominantly sputum specimens) from a TB reference clinic Laboratory: Reference laboratory Country: Netherlands World Bank Income Classification: High-income TB incidence rate: 7.3 per 100,000 MDR-TB prevalence: Percent MDR-TB among new TB cases = 1.3% and among retreatment cases = 3.4% (Source: Nationwide surveillance, 2010) TB prevalence in study: 71.9%

Index tests	Index: Xpert MTB/RIF assay Specimen Condition: 26 fresh and 63 frozen (previously stored) samples Specimen Preparation: Unprocessed Parameter value for rifampicin resistance: 3.5

Target condition and reference standard(s)	Target condition: Pulmonary TB Reference standard for pulmonary TB: MGIT 960 Target condition: Rifampicin resistance Reference standard for rifampicin resistance: MGIT 960

Flow and timing

Comparative

Notes	Sample included 2 extrapulmonary specimens (1 pleural fluid and 1 gastric aspirate) One patient whose sample was smear and culture-negative was culture-positive on a sample 11 days later

Methodological quality

Item	Authors' judgement	Risk of bias	Applicability concerns

DOMAIN 1: Patient Selection

Was a consecutive or random sample of patients enrolled?	No

Was a case-control design avoided?	Yes

Did the study avoid inappropriate exclusions?	Yes

			High

DOMAIN 2: Index Test All tests

Were the index test results interpreted without knowledge of the results of the reference standard?	Yes

If a threshold was used, was it pre-specified?	Yes

			Low

DOMAIN 3: Reference Standard

Is the reference standards likely to correctly classify the target condition?	Yes

Were the reference standard results for TB detection interpreted without knowledge of the results of the index test?	Yes

Were the reference standard results for rifampicin resistance detection interpreted without knowledge of the results of the index test?	Yes

			Low

DOMAIN 4: Flow and Timing

Was there an appropriate interval between index test and reference standard?	Yes

Did all patients receive the same reference standard?	Yes

Were all patients included in the analysis?	Unclear

Study characteristics

Patient sampling	Prospective study; the sampling method was unclear

Patient characteristics and setting	Presenting signs and symptoms: Symptoms suggestive of TB Age: Not stated Sex, female: Not stated HIV infection: Not stated History of TB: Not stated Sample size: 85 Clinical setting: Laboratory-based evaluation of respiratory specimens (predominantly sputum) at a university hospital Laboratory: Reference laboratory Country: Turkey World Bank Income Classification: Middle/low income TB incidence rate: 28 per 100,000 MDR-TB prevalence: Data not available TB prevalence in study: 29.4%

Index tests	Index: Xpert MTB/RIF assay Specimen Condition: Fresh Specimen Preparation: Unprocessed Parameter value for rifampicin resistance: 3.5

Target condition and reference standard(s)	Target condition: Pulmonary TB Reference standard for pulmonary TB: BACTEC 460 Target condition: Rifampicin resistance Reference standard for rifampicin resistance: BACTEC 460

Flow and timing

Comparative

Notes	Paper was written in Turkish: sample included 10 extrapulmonary specimens (5 pleural fluid and 5 urine samples); no patients were found to have rifampicin resistance

Methodological quality

Item	Authors' judgement	Risk of bias	Applicability concerns

DOMAIN 1: Patient Selection

Was a consecutive or random sample of patients enrolled?	Unclear

Was a case-control design avoided?	Yes

Did the study avoid inappropriate exclusions?	Yes

			High

DOMAIN 2: Index Test All tests

Were the index test results interpreted without knowledge of the results of the reference standard?	Yes

If a threshold was used, was it pre-specified?	Yes

			Low

DOMAIN 3: Reference Standard

Is the reference standards likely to correctly classify the target condition?	Yes

Were the reference standard results for TB detection interpreted without knowledge of the results of the index test?	Yes

Were the reference standard results for rifampicin resistance detection interpreted without knowledge of the results of the index test?	Yes

			Low

DOMAIN 4: Flow and Timing

Was there an appropriate interval between index test and reference standard?	Yes

Did all patients receive the same reference standard?	Yes

Were all patients included in the analysis?	Unclear

Study characteristics

Patient sampling	Retrospective study with consecutive enrolment of participants

Patient characteristics and setting	Presenting signs and symptoms: Cough lasting at least 2 weeks Age: median 34 years; range 18 to 76 years Sex, female: 30.8% HIV infection: 0.9% History of TB: 1.9% Sample size: 107 Clinical setting: TB hospital Laboratory: Reference laboratory Country: Vietnam World Bank Income Classification: Middle/low income TB incidence rate: 180 per 100,000 MDR-TB prevalence: Percent MDR-TB among new TB cases = 2.7% and among retreatment cases = 19.3% (Source: Nationwide survey, 2006) TB prevalence in study: 76.6%

Index tests	Index: Xpert MTB/RIF assay Specimen Condition: Frozen Specimen Preparation: Processed Parameter value for rifampicin resistance: 3.5

Target condition and reference standard(s)	Target condition: Pulmonary TB Reference standard: Löwenstein-Jensen culture and MGIT 960

Flow and timing

Comparative

Notes	Rifampicin resistance data were not reported

Methodological quality

Item	Authors' judgement	Risk of bias	Applicability concerns

DOMAIN 1: Patient Selection

Was a consecutive or random sample of patients enrolled?	Yes

Was a case-control design avoided?	Yes

Did the study avoid inappropriate exclusions?	Yes

			High

DOMAIN 2: Index Test All tests

Were the index test results interpreted without knowledge of the results of the reference standard?	Yes

If a threshold was used, was it pre-specified?	Yes

			Low

DOMAIN 3: Reference Standard

Is the reference standards likely to correctly classify the target condition?	Yes

Were the reference standard results for TB detection interpreted without knowledge of the results of the index test?	Yes

Were the reference standard results for rifampicin resistance detection interpreted without knowledge of the results of the index test?	Yes

			Low

DOMAIN 4: Flow and Timing

Was there an appropriate interval between index test and reference standard?	Yes

Did all patients receive the same reference standard?	Yes

Were all patients included in the analysis?	Unclear

Study characteristics

Patient sampling	Retrospective study; with enrolment of participants by convenience

Patient characteristics and setting	Presenting signs and symptoms: Not reported Age: Data provided for patients with pulmonary and extrapulmonary combined; 95% of patients were 15 years and older Sex, female: Not stated HIV infection: Not stated History of TB: Not stated Sample size: 89 pulmonary specimens (study also included 23 extrapulmonary specimens) Clinical setting: Laboratory-based evaluation of clinical specimens at a university hospital Laboratory: Reference laboratory Country: USA World Bank Income Classification: High-income TB incidence rate: 4.1 per 100,000 MDR-TB prevalence: Percent MDR-TB among new TB cases = 1.1% and among retreatment cases = 4.4% (Source: Nationwide surveillance, 2010) TB prevalence in study: 32.6%

Index tests	Index: Xpert MTB/RIF assay Condition: Frozen Preparation: Processed Parameter value for rifampicin resistance: 5

Target condition and reference standard(s)	Target condition: Pulmonary TB Reference standard for pulmonary TB: Löwenstein-Jensen culture and MGIT 960 Target condition: Rifampicin resistance Reference standard for rifampicin resistance: MGIT 960

Flow and timing

Comparative

Notes	Of specimens tested, four were positive by Xpert for rifampicin resistance; three were positive by the reference standard

Methodological quality

Item	Authors' judgement	Risk of bias	Applicability concerns

DOMAIN 1: Patient Selection

Was a consecutive or random sample of patients enrolled?	No

Was a case-control design avoided?	Yes

Did the study avoid inappropriate exclusions?	Yes

			High

DOMAIN 2: Index Test All tests

Were the index test results interpreted without knowledge of the results of the reference standard?	Yes

If a threshold was used, was it pre-specified?	Yes

			Low

DOMAIN 3: Reference Standard

Is the reference standards likely to correctly classify the target condition?	Yes

Were the reference standard results for TB detection interpreted without knowledge of the results of the index test?	Yes

Were the reference standard results for rifampicin resistance detection interpreted without knowledge of the results of the index test?	Yes

			Low

DOMAIN 4: Flow and Timing

Was there an appropriate interval between index test and reference standard?	Yes

Did all patients receive the same reference standard?	Yes

Were all patients included in the analysis?	Yes

Study characteristics

Patient sampling	Retrospective study with enrolment of participants by convenience

Patient characteristics and setting	Presenting signs and symptoms: Patients found to be smear negative by microscopy examination Age: All patients were 15 years of age or older Sex, female: Not stated HIV infection: Not stated History of TB: Not stated Sample size: 107 Clinical setting: Laboratory-based evaluation of clinical specimens at a university hospital Laboratory: Reference laboratory Country: Spain World Bank Income Classification: High income TB incidence rate: 16 per 100,000 MDR-TB prevalence: Percent MDR-TB among new TB cases = 0.2% and among retreatment cases = 1.5% (Source: Survey in Galicia region, 2005) TB prevalence in study: 72.9%

Index tests	Index: Xpert MTB/RIF assay Specimen Condition: Frozen Specimen Preparation: Processed Parameter value for rifampicin resistance: 3.5

Target condition and reference standard(s)	Target condition: Pulmonary TB Reference standard for pulmonary TB: Lowenstein-Jensen culture and MGIT 960 Target condition: Rifampicin resistance Reference standard for rifampicin resistance: Bactec 460

Flow and timing

Comparative

Notes	Sample set Include 1 pulmonary biopsy specimen Of 85 pulmonary and extrapulmonary specimens tested, 6 were positive by Xpert for rifampicin resistance: 7 specimens were positive by the reference standard

Methodological quality

Item	Authors' judgement	Risk of bias	Applicability concerns

DOMAIN 1: Patient Selection

Was a consecutive or random sample of patients enrolled?	No

Was a case-control design avoided?	Yes

Did the study avoid inappropriate exclusions?	No

			High

DOMAIN 2: Index Test All tests

Were the index test results interpreted without knowledge of the results of the reference standard?	Yes

If a threshold was used, was it pre-specified?	Yes

			Low

DOMAIN 3: Reference Standard

Is the reference standards likely to correctly classify the target condition?	Yes

Were the reference standard results for TB detection interpreted without knowledge of the results of the index test?	Unclear

Were the reference standard results for rifampicin resistance detection interpreted without knowledge of the results of the index test?	Yes

			Low

DOMAIN 4: Flow and Timing

Was there an appropriate interval between index test and reference standard?	Yes

Did all patients receive the same reference standard?	Yes

Were all patients included in the analysis?	Yes

Study	Reason for exclusion
Armand 2011	This was a case control study that compared Xpert MTB/RIF assay with an in-house IS6110-based real-time PCR using TaqMan probes (IS6110-TaqMan assay) for TB detection

Blakemore 2011	This was a technical paper that compared bacterial load quantitation determined by Xpert with the load determined by conventional quantitative methods.

Causse 2011	This study evaluated Xpert for the diagnosis of extrapulmonary TB

Friedrich 2011a	This study evaluated Xpert for the diagnosis of pleural TB, a form of extrapulmonary TB

Hillemann 2011	This study evaluated Xpert for the diagnosis of extrapulmonary TB

Lawn 2011b	This was a narrative review that covered the development, technical details, and diagnostic accuracy of Xpert in adults and children

Ligthelm 2011	This study evaluated Xpert for the diagnosis of TB lymphadenitis, a form of extrapulmonary TB

Nicol 2011	This study evaluated Xpert for the diagnosis of TB in children

Vadwai 2011	This study evaluated Xpert for the diagnosis of extrapulmonary TB

Van Rie 2010	This was a review that covered technical details of Xpert and the test's potential value as a point-of-care test

Trial name or title	Multicentre randomised control trial of point-of-treatment (Clinic-based) Xpert MTB/RIF assay

Target condition and reference standard(s)	TB: reference standard: MGIT 960

Index and comparator tests	Xpert MTB/RIF assay and smear microscopy

Starting date	7 July 2011

Contact information	keertan.dheda@uct.ac.za; jonny.peter@uct.ac.za

Notes	RCT to assess the impact of Xpert on time-to-treatment and TB-related patient morbidity in primary care clinics. Identifier: NCT01554384

Trial name or title	Evaluation of Xpert MTB/RIF assay for the rapid identification of TB and TB rifampin resistance in HIV-infected and HIV-uninfected pulmonary tuberculosis suspects

Target condition and reference standard(s)	TB: reference standard: MGIT culture

Index and comparator tests	Xpert MTB/RIF assay

Starting date	24 April 2012

Contact information	Jay (John) Dwyer jdwyer@php.ucsf.edu

Notes	Cohort study of diagnostic accuracy of Xpert in HIV-infected and HIV-uninfected patients suspected of having pulmonary TB. Identifier: NCT01587469

Trial name or title	A randomised control trial of sputum induction, and new and emerging technologies in a high HIV prevalence primary care setting

Target condition and reference standard(s)	TB: liquid culture

Index and comparator tests	Xpert MTB/RIF assay

Starting date	August 2009

Contact information	jonny.peter@uct.ac.za

Notes	RCT to evaluate sputum induction for TB diagnosis in a primary care clinic for adults suspected of having TB. Identifier: NCT01545661

Test	No. of studies	No. of participants
1 TB detection, all studies	27	7816
2 Add on	23	5719
3 Smear positive	24	1735
4 Smear negative	25	5878
5 HIV positive	11	1557
6 HIV negative	13	1981
7 TB detection, condition of specimen	24	7453
8 TB detection, specimen preparation	27	7816
9 TB prevalence	27	7816
10 Income status	27	7816
11 Rifampicin resistance	20	2340
12 RIF resistance prevalence	20	2340

PERMALINK

Xpert® Mtb/Rif assay for pulmonary tuberculosis and rifampicin resistance in adults

Karen R Steingart

Hojoon Sohn

Ian Schiller

Lorie A Kloda

Catharina C Boehme

Madhukar Pai

Nandini Dendukuri

Abstract

Background

Objectives

Search methods

Selection criteria

Data collection and analysis

Main results

Authors' conclusions

Background

Target condition being diagnosed

Tuberculosis

Rifampicin resistance

Index test(s)

Figure 1.

Clinical pathway

Prior test(s)

Role of index test(s)

Alternative test(s)

Rationale

Objectives

Primary objectives

Setting of testing

Methods

Criteria for considering studies for this review

Types of studies

Participants

Index tests

Target conditions

Reference standards

Search methods for identification of studies

Electronic searches

Searching other resources

Data collection and analysis

Selection of studies

Data extraction and management

Assessment of methodological quality

Statistical analysis and data synthesis

I. B. Xpert used as an add-on test following a negative smear microscopy result

Approach to indeterminate index test results

Investigations of heterogeneity

I. A. TB detection

II. A. Detection of rifampicin resistance

Sensitivity analyses

Assessment of reporting bias

Other analyses

NTM

Results

Results of the search

Figure 2.

Methodological quality of included studies

Figure 3.

Figure 4.

Findings

I. A. TB detection, Xpert used as an initial test replacing smear microscopy

Figure 5.

Table 1.

Figure 6.

I. B. TB detection, Xpert used as an add-on test following a negative smear microscopy result

Figure 7.

Figure 8.

Indeterminate results

Investigations of heterogeneity, TB detection

Clinical subgroups

TB detection in smear-positive and smear-negative patients

Figure 9.

Table 2.

TB detection among people living with HIV

Figure 10.

Figure 11.

TB detection among HIV-positive smear-negative patients

Effect of condition of the specimen