Two-step complete polarization logic Bell-state analysis

Abstract

The Bell state plays a significant role in the fundamental tests of quantum mechanics, such as the nonlocality of the quantum world. The Bell-state analysis is of vice importance in quantum communication. Existing Bell-state analysis protocols usually focus on the Bell-state encoding in the physical qubit directly. In this paper, we will describe an alternative approach to realize the near complete logic Bell-state analysis for the polarized concatenated Greenberger-Horne-Zeilinger (C-GHZ) state with two logic qubits. We show that the logic Bell-state can be distinguished in two steps with the help of the parity-check measurement (PCM) constructed by the cross-Kerr nonlinearity. This approach can be also used to distinguish arbitrary C-GHZ state with N logic qubits. As both the recent theoretical and experiment work showed that the C-GHZ state has its robust feature in practical noisy environment, this protocol may be useful in future long-distance quantum communication based on the logic-qubit entanglement.

Bell-state analysis (BSA) is of vice importance in quantum communication. Quantum teleportation¹, quantum key distribution², and quantum secure direct communication³,⁴ all need the BSA. Especially, in long-distance quantum communication, in order to resist the environmental noise, they should exploit the entanglement swapping instead of distributing the photon directly to extend the length of the entanglement, which is called the quantum repeaters⁵. The key element of the quantum repeaters is still the BSA.

Usually, in an optical system, there are three different approaches to realize the BSA. The first approach requires the linear optical elements⁶,⁷,⁸. However, one cannot perform the complete BSA with only linear optics, for the optimal success probability is only 50%⁶,⁷. The second approach still requires the linear optical elements but resorts to the hyperentanglement⁹,¹⁰,¹¹,¹². For example, Walborn et al. described a feasible and interesting hyperentanglement-assisted BSA protocol⁹. In their protocol, the hyperentangled state is prepared in both polarization and momentum degrees of freedom. With the help of momentum-entangled Bell state, they can completely distinguish four polarized Bell states. Their protocol can also distinguish four momentum-entangled Bell states, with the help of polarization Bell state. In 2008, the group of Kwiat beat the channel capacity limit for linear photonic superdense coding¹². They can completely distinguish four polarized Bell states with orbital-angular momentum entanglement. In essence, this approach works in a large Hilbert space in two degrees of freedom. The third approach works in a nonlinear optical system¹³,¹⁴,¹⁵,¹⁶. For instance, with the help of the cross-Kerr nonlinearity, they can perform the near complete parity-check measurement (PCM)¹³,¹⁷. The PCM can distinguish the even parity states and from the odd parity states and near deterministically. Here is the horizonal polarized photon and is the vertical polarized photon, respectively. The complete polarization BSA can be well performed in two steps. The first step is to distinguish from . The second step is to distinguish from , and from , respectively. Here and are four polarized Bell states of the form

On the other hand, it is known that the decoherence is one of the main obstacles in long-distance quantum communication. In the past decades, people developed serval approaches to resist the decoherence. They presented the quantum repeaters⁵ and nonlinear photon amplification¹⁸,¹⁹,²⁰ to resist the photon loss during the entanglement distribution. They also proposed the entanglement purification²¹,²²,²³,²⁴,²⁵,²⁶,²⁷,²⁸,²⁹,³⁰ and concentration³¹,³²,³³,³⁴,³⁵ to improve the quality of the degraded entanglement. In current quantum communication protocols, they usually encode the quantum qubit in the physical qubit directly. In 2011, Fröwis and Dür developed a class of quantum entanglement, which encodes many physical qubits in a logic qubit³⁶. Such logic-qubit entanglement has the similar feature as the Greenberger-Horne-Zeiglinger (GHZ) state, but is more robust than the normal GHZ state in a noisy environment. In 2012, Munro et al. developed a new approach of quantum communication based on logic qubits³⁷. The logic-qubit entanglement, which is also called the concatenated GHZ (C-GHZ) state can be described as³⁸,³⁹,⁴⁰,⁴¹,⁴²

Here N is the number of logic qubit and M is the number of the physical qubit in each logic qubit. are the M-photon polarized GHZ states as

In 2014, Lu et al. realized the first experiment of C-GHZ state with N = 2 and M = 3 in a linear optical system⁴². By observing the dynamics of distillability of the C-GHZ evolving under a collective noisy environment, they showed that the C-GHZ state can tolerate more noise than the GHZ state.

As the logic-qubit entangled state is more robust than the entanglement encoded in the physical qubit directly, it is possible to perform the quantum communication based on logic-qubit entanglement. Due to the importance of BSA in quantum communication, it is interesting to discuss the BSA encoded in logic qubit. One line of the research for logic Bell-state analysis (LBSA) in based on linear optics. For example, recently, Lee et al. described the LBSA for another type of logic qubit. Their protocol is based on the linear optics and does not require photon-number-resolving measurements, which is feasible in current experimental condition⁴³. Another line of research exploits the cross-Kerr nonlinearity. For example, we will describe an approach to realize the near complete LBSA based on logic-qubit entanglement. We also show that this approach can be used to perform the arbitrary C-GHZ state analysis (Supplementary Materials). Such LBSA will provide us some interesting application in future quantum information processing, such as the quantum teleportation and entanglement swapping for an arbitrary logic qubit. In this way, we can set up the long-distance quantum entanglement channel based on the logic-qubit entanglement.

Results

In this section, we will start to explain our LBSA. A logic Bell state can be regarded as the special state of the C-GHZ state with N = M = 2. A logic Bell state contains two logic qubits. Each logic qubit is encoded in a polarized Bell state. The four logic Bell states can be described as

From Fig. 1, the two photons in logic qubit A are in the spatial modes a₁ and a₂, respectively. The two photons in logic qubit B are in the spatial modes b₁ and b₂, respectively. We first let four photons pass through the half wave plates (HWPs), which will make and . The HWPs act as the role of Hadamard operation. The four HWPs will transform the states in Eq. (4) to

Figure 1. A schematic drawing of our LBSA.

PCM represents the parity-check measurement gate described in Method section.

After passing through the HWPs, the state can be described as

In the first step, we let the four photons in spatial modes a₁ and b₁, a₂ and b₂ pass through the two PCM gates, respectively. The PCM gate is detailed in the Method Section. Briefly speaking, in each PCM gate, the two photons combined with the coherent state will couple with the cross-Kerr material. The PCM gate can distinguish the even parity states and from the odd parity states and , by measuring the phase shift of the coherent state. If the coherent state picks up no phase shift, we will get the even parity state. On the other hand, if the coherent state picks up 2θ phase shift, we will get the odd parity state. During the whole measurement, we do not measure the two photons directly. Such function is also described in Ref. 13. Interestingly, if the initial state is , after performing the measurements, the results of the two PCMs are the same. If the PCM results are both even, will become

While if the PCM results are both odd, will become

On the other hand, if the initial state is , we can obtain the same results as . In detail, if the PCM results are even, will collapse to

while if the measurement results are both odd, will become

If the initial state is , after performing the PCM operations, the measurement results of the two PCM gates are different. If the PCM result in spatial modes a₁ and b₁ is even, the PCM result in spatial modes a₂ and b₂ must be odd. While if the PCM reslut in spatial modes a₁ and b₁ is odd, the PCM result in spatial modes a₂ and b₂ must be even. In the first case, the will collapse to and will collapse to . In the second case, will collapse to and will collapse to .

From above description, according to the PCM results, the four logic Bell states can be divided into two groups. If the PCM results are the same, they are . If the PCM results are different, they are . The second step is to distinguish or in each group. We take for example. From Eqs (7 and 9), if the initial state is , the state in a₁b₁ must be Otherwise, if the initial state is , the state in a₁b₁ must be . Therefore, the second step only needs to distinguish the states . After two photons passing through the two HWPs, state will not change, while will become . Finally, we let two photons pass through two polarization beam splitters (PBSs), respectively. The PBS can transmit polarized photon and reflect polarized photon, respectively. will make two photons both transmit or reflect from two PBSs, but will make one photon transmit from the PBS, and the other reflect from the PBS, respectively. According to the output modes of the two photons, we can easily distinguish from . If the initial states are , they can be distinguished in the same way. In this way, the four logic Bell states can be completely distinguished.

Discussion

So far, we have fully described our LBSA. This approach can be extended to perform the C-GHZ state analysis (see Supplementary Materials). In the LBSA, two PCM gates are required. In the first step, two PCM operations on the a₁b₁ and a₂b₂ spatial modes are both performed. According to the measurement results, we can distinguish the states from . If the measurement results are the same, the original states must be . Otherwise, the original states must be . In the second step, we only need to distinguish the conventional polarized Bell state from . It can be well distinguished by two PBSs. In this way, the four logic Bell states can be completely distinguished. In above explanation, we let the logic qubits are . If the logic qubits are arbitrary polarized GHZ states , this LBSA can also be well performed (see Supplementary Materials).

It is known that BSA plays an important role in quantum communication. If the LBSA can be well performed, it may provide us an additional application in quantum communication. For example, we can teleportate an arbitrary logic qubit . Suppose the logic qubit is

with . The logic qubits B and C are the logic-qubit entanglement with

The logic qubit A combined with the logic-qubit entanglement B and C can be written as

From Eq. (13), if we can well perform the LBSA on logic qubit A and B, we can teleportate the logic qubit A to C. Briefly speaking, if the LBSA result is , logic qubit C has the same form of the original qubit A, which is defined as . If the LBSA result is , the logic qubit C is . It can be transformed to by performing a phase flip operation on one of the photons. If the LBSA result is , the logic qubit C is , one can perform bit-flip operation on all the photons to transform it to . Finally, if the LBSA result is , one can also transform the state to . In this way, the logic qubit teleportation can be completely performed.

We can also perform the entanglement swapping with logic-qubit entanglement. Quantum repeaters based on logic-qubit entanglement will provide the double protection from the environmental noise. Suppose that the logic-qubit entanglement A and B, and C and D are both . The whole system can be described as

From Eq. (14), if we perform the LBSA on logic qubit B and C, we can connect the entanglement between the logic qubit A and D.

In our protocol, the key element to realize the LBSA is the PCM gate, which is constructed by the cross-Kerr nonlinearity. As pointed out by Refs ^{17, 44}, the error probability of the PCM gate can be described as , where α is the parameter of the coherent state and θ is the phase shift of the coherent state. P_error can be explained as follows. The parity of the measured state is even, but the PCM shows odd, with the probability P_error. On the other hand, the parity of measured state is odd, but the PCM shows even, with the same probability P_error. In LBSA, if the logic qubits are , we can calculate the fidelity of LBSA as

Here the fidelity is denoted as the probability to perform the correct LBSA. As shown in Fig. 1, we are required to perform PCM twice. Suppose that the initial state are one of the states . After performing the PCM operations, the initial state collapses to the state in Eq. (7). During such precess, if both PCM results are even, with the right probability of (1 − P_error)², we will judge the right state in Eq. (7). However, if both PCM results are odd, with the error probability of , we will judge the error state in Eq. (8). Actually, the collapsed state is still the state in Eq. (7). Interestingly, both states in Eq. (7) and 8 mean that the original state are . It reveals that even if both PCM results are wrong, it does not affect the discrimination. Certainly, if one of PCM is right and the other is wrong with the probability of 2P_error(1 − P_error), which shows that the PCM results are different, it will mislead us that the original state is . In this way, it contributes the error discrimination.

Interestingly, in the C-GHZ state analysis, the discrimination number of the states is 2^N, which is decided by the logic qubit number N. The physical qubit number M does not affect the discrimination number of the state. Using single-qubit rotation and single-qubit measurement, we can transform to by measuring M − 2 photons in each logic qubit. If we only consider that the error coming from the PCM, the number M does not affect the total fidelity. However, the number of logic qubit N will decrease the fidelity. It can be written as

As pointed out in Refs ^{13, 44}, highly accurate discrimination is possible with weak cross-Kerr nonlinearities. In an NV-diamond system, such error probability can reach P_error = 0.01. In Fig. 2, we calculated the fidelity F_N altered with the logic qubit number N. We let P_error be 0.01, 0.05 and 0.1, respectively. From Fig. 2, if P_error = 0.01, we can obtain F_N ∼ 0.9 with N = 10. Another imperfection comes from the detection efficiency. The detection efficiency means that the single photon enters the single-photon detector, but the single-photon does not register it with the probability of η. Therefore, the success probability of registering a single photon is 1 − η. From Fig. 1, the detection efficiency will decrease the total success probability. For the LBSA with N = M = 2, the success probability is P_2,2 = (1 − η)². We can also obtain P_N,2 = (1 − η)^N with M = 2. If M > 2, we first convert the states to by measuring M − 2 photons in each logic qubit. Here k = 1, 2, …, 2^N − 1. Such success probability is [(1 − η)^M − 2]^N. Therefore, the total success probability is P_N,m = (1 − η)^{(M − 2)N}. It shown that if M > 2, it will greatly decrease the total success probability. For example, if η = 0.1, P_3,2 ≈ 0.73, while P_3,3 ≈ 0.387.

Figure 2. Schematic of the fidelity of the C-GHZ state analysis altered with the logic qubit number N.

The P_error is 0.01, 0.05, and 0.1, respectively.

On the other hand, though the robustness of the C-GHZ state was discussed both by theory and experiment, there is still a controversial topic. For example, Chaves et al. did not acknowledge that the simpler GHZ encodings is robust against simpler dephasing noise⁴⁵,⁴⁶, which requires us to perform further investigation. Moreover, though there are many theoretical works for quantum information processing based on cross-Kerr nonlinearity, the cross-Kerr nonlinearity is also a controversial topic⁴⁷. The debate over the usefulness of photonic quantum information processing based on the cross-Kerr nonlinearity is that the phase shift is too small to be measured in a single photon level. It is a typical dimensionless magnitude of θ ∼ 10⁻¹⁸. Fortunately, the theoretical work showed that with electromagnetically induced transparencies (EIT), whispering-gallery microresonators, optical fibers, or cavity QED systems, nonlinearities of magnitude θ can reach θ ∼ 10^{−2 13},⁴⁴. Moreover, some recent researches also showed that it is possible to obtain the observable value of the Kerr phase shift⁴⁸,⁴⁹,⁵⁰.

In conclusion, we have described a two-step approach to realize the near complete logic Bell-state and arbitrary C-GHZ state analysis. In our protocol, we exploit the cross-Kerr nonlinearity to construct the PCM gate. The whole task can be divided into two steps. In the first step, after performing the PCM operations, the four states can be divided in two groups. The first group is and the second group is . In the second step, the states and in each group can also be discriminated by PCM operation. Our protocol can be extended to distinguish the arbitrary C-GHZ state. It can also be divided into two steps. In the first step, all the 2^N C-GHZ states can be divided into 2^N − 1 groups, according to the different PCM results in both left and right sides. In each group, the two states can also be completely distinguished in the second step. We also discussed the potential application of this LBSA, such as teleportating a logic qubit and performing the logic-qubit entanglement swapping. This LBSA may provide an alternative approach to perform the other quantum communication tasks, such as quantum key distribution, quantum secure direct communication, quantum state sharing, and so on.

Methods

Cross-Kerr nonlinearity provides us a powerful tool to construct the PCM gate, which has been widely used in quantum information processing. There are many researches based on the cross-Kerr nonlinearity, including the construction of the controlled-not (CNOT) gate¹⁷, performing the quantum communication⁵¹, quantum computation⁵², and the BSA¹³, realizing the entanglement purification²² and concentration³³, and so on⁴⁴,⁵³,⁵⁴,⁵⁵,⁵⁶.

As shown in Fig. 3, the Hamiltonian of a cross-Kerr nonlinear medium can be written as . The is the number operator for mode a(b)¹⁷. The is the coupling strength of the nonlinearity. It is decided by the cross-Kerr material. If we consider a two-photon state . Here and a₁(a²) is the spatial mode as shown in Fig. 3. The combined with the coherent state can be described as

Figure 3. A schematic drawing of our PCM gate.

It can distinguish the even parity states and from the odd parity states and . PBS represents the polarization beam splitters which can transmit the photon and reflect the photon. The similar PCM gate is also shown Ref. 17.

The PCM gate works as follows. From Eq. (17), if the coherent state picks up no phase shift, the state will become the even parity state . If the coherent state picks up the phase shift 2θ, the state will collapse to the odd parity state . Here we should require the ±2θ undistinguished, which can be completed by X quadrature measurement. It can be achieved by choosing the local oscillator phase π/2 offset from the probe phase¹⁷. The error probability can be easily obtained with the same principle as described in Refs ^{13, 17}. It can be described as . If we choose the same coherent probe beam and weak cross-Kerr nonlinearities with αθ² > 9, we can obtain that P_error is less than 10⁻⁵.

Additional Information

How to cite this article: Sheng, Y.-B. and Zhou, L. Two-step complete polarization logic Bell-state analysis. Sci. Rep. 5, 13453; doi: 10.1038/srep13453 (2015).