Skip to main content
PMC home page
Nanoscale Research Letters logoLink to Nanoscale Research Letters
. 2015 Nov 17;10:444. doi: 10.1186/s11671-015-1147-1

Sensitivity and Reusability of SiO2 NRs@ Au NPs SERS Substrate in Trace Monochlorobiphenyl Detection

Mengjing Hou 1, Yu Huang 1, Lingwei Ma 1, Zhengjun Zhang 2,✉
PMCID: PMC4648809  PMID: 26577388

Abstract

Surface-enhanced Raman scattering (SERS) effect is quite preferred to detect trace pollutants, and reusable SERS substrate is of important practical value. In this research, a kind of effective SiO2 nanorods (NRs)@ Au nanoparticles (NPs) substrate was fabricated completely with physical methods, and it was quite sensitive so that 1 × 10−6 M monochlorobiphenyl (CB) could be detected. Furthermore, congeners of CB could be detected by reusing this kind of SERS substrate, and the cleaning treatment between every two detections was very simple. The excellent performance of the reusable SERS substrate indicated its great application potential.

Keywords: Monochlorobiphenyl, Surface-enhanced Raman scattering, Reusability, Trace detection, Principal component analysis

Background

Trace pollutant detection is increasingly concerning during the last several decades, on account of the danger to environment and public health caused by the accumulation of trace harmful chemicals [1–5]. The detection method based on surface-enhanced Raman scattering (SERS) effect has been preferred in recent years, [6–10] for it is accurate, rapid, and convenient. On the surface of noble metal nanostructures, localized electric field intensity would be enhanced due to the localized surface plasmon resonance (LSPR) excited by laser [11–14]. By being adsorbed on the SERS substrate, trace pollutants could be detected with a Raman spectrometer. To detect chemicals of lower concentration, a lot of effort has been taken by researchers to improve the SERS substrates. For example, kinds of Au or Ag nanostructures were synthesized with HAuCl4 or silver nitrate [15–18], while the ones fabricated by sputtering were also reported [19–21].

With well-designed SERS substrates, trace polychlorinated biphenyls (PCBs) were detected as reported. PCBs are a series of persistent organic pollutants which could accumulate in human bodies through the food chain rather than degrade even if their initial concentration in soil and water is low. With the least chlorine atom in the molecule, monochlorobiphenyl is highly volatile and easy to disperse throughout the environment, which leads to greater danger. As toxic chemicals, PCBs including monochlorobiphenyl could harm the reproductive system, integumentary system, brain, and so on and are also carcinogenic [22, 23]. Therefore, it is quite necessary to detect trace PCBs so that to prevent their diffusion. However, it is difficult for PCB molecules to adsorb on the surface of Au and Ag. Especially for SERS substrates fabricated with some kinds of solution, the limit of detection (LOD) is unsatisfactory. Hence, surface modification was generally carried out on the noble metal nanostructures. With β-cyclodextrin or alkanethiol, PCB molecules would be caught tightly near the metal surface, so that their Raman scattering signal would be enhanced significantly [24–26]. The modified molecules, however, would meanwhile prevent desorption of PCB molecules due to the action of van der Waals forces, which makes the reuse process of the SERS substrate quite hard, and the signal intensity of re-adsorbed PCBs becomes weaker obviously [27].

To achieve the objective of reusing SERS substrates to detect trace PCBs which is quite valuable in the actual application situation, a kind of SERS substrate fabricated with physical methods completely was designed and optimized in this research. With abundant “hot spots” formed on the rough surface of Au nanostructures and in the gaps between them, [28, 29] the SERS substrate showed excellent trace detection ability. Moreover, without other chemicals existing on the surface of Au, PCB molecules could contact the “hot spots” directly, as well as be desorbed and re-adsorbed easily. The experimental results of reusing the SERS substrate several times to detect the same type or different type of PCB congeners successfully demonstrated the effectiveness of this kind of substrate. To characterize the trace detection effect of the reusing process, the chemometrics method of principal component analysis (PCA) was employed to calculate the SERS signal intensity of the re-adsorbed PCB molecules and the desorption degree comprehensively.

Methods

Fabrication of SiO2 NRs@ Au NPs SERS Substrates

The SiO2 NRs@ Au NPs SERS substrates were fabricated completely by physical vapor deposition methods. To obtain a vertical SiO2 nanorod array, the glancing angle deposition (GLAD) technique was employed with a DZS-500 electronic beam evaporation system (SKY Technology Development Co., Ltd. Chinese Academy of Sciences) [30]. The wafer was kept in an in-plane rotation with a certain oblique angle, so that the incident angle of the SiO2 beam was 86°. The height of the vertical SiO2 nanorods was ~140 nm, with enough space between each other as Fig. 1a shows, which ensured the Au nanoparticles could reach the side of the nanorods during the next procedure. The oblique SiO2 nanorod array was deposited with a method which was a little different with GLAD. By keeping the oblique plane with an angle of 86° to the horizontal plane, the wafer received more SiO2 nanoparticles from a certain direction; thus, the oblique nanorod array took shape. As shown in Fig. 1b, the length of the oblique SiO2 nanorods was ~140 nm, which was similar to the vertical nanorods.

Fig. 1.

Fig. 1

Open in a new tab

SEM morphology of a vertical and b oblique SiO2 nanorod array

The Au nanoparticles were sputtered on the two kinds of SiO2 nanorod array afterwards by a SBC-12 vacuum ion coater (KYKY Technology Co., Ltd.). Through alteration of the deposition time of Au from 60, 90, 120,…, up to 360 s, the amount and morphology of the nanoparticles were modified. Hence, 22 kinds of samples in total were prepared.

Characterization of SERS Substrates

By scanning electron microscope (SEM, Merlin VP Compact, Carl Zeiss), the morphology of the SiO2 NRs@ Au NPs SERS substrates was characterized. And by transmission electron microscope (TEM, JEOL-2100F), the high-resolution image and diffraction pattern of the nanostructures were obtained.

Preparation of Analyte Solution

To compare the SERS effect of the substrates with a different amount and morphology of Au nanoparticles on vertical as well as oblique SiO2 nanorod arrays, trans-1,2-bis(4-pyridyl)-ethylene (BPE) (J&K Scientific Ltd.) was employed as a probe molecule. The BPE powder was dissolved in ethanol and diluted to 1 × 10−4, 1 × 10−6, 1 × 10−7, 1 × 10−8, and 1 × 10−9 M, in sequence. The analytes 2-chlorobiphenyl (2-CB), 3-chlorobiphenyl (3-CB), and 4-chlorobiphenyl (4-CB) (AccuStandard Inc.) were dissolved in acetone. 2-CB and 3-CB solutions with a concentration of 1 × 10−4 M and 4-CB solutions with concentrations of 1 × 10−4, 1 × 10−5, 5 × 10−6, and 1 × 10−6 M were prepared.

Adsorption of Probe Molecules

To make the molecules adsorb on the SERS substrates, proper methods were used. By immersing the SERS substrates in the solution, BPE molecules were adsorbed both physically and chemically. After being rinsed with ethanol, only chemisorbed molecules remained. Chlorobiphenyl solution was dropped on the SERS substrates, and the volumes of the droplets were 3 μL each time. To clean the adsorbed CB molecules, the SERS substrate was washed with acetone for several seconds.

Measurements of SERS Spectra

With an optical fiber micro-Raman system (i-Raman Plus, B&W TEK Inc.), the SERS spectra of the trace chemicals were measured. The employed 785-nm laser formed a beam spot of ~85 μm in diameter on the surface of the samples, while the laser power and the integral time were adjusted according to each series of samples.

Results and Discussion

The localized electric field could be significantly enhanced on the surface of the Au nanoparticles and gaps between them. On a rougher surface, the electric field intensity would be improved, and with more Au particles on the SERS substrate, the Raman signal would be stronger of course. Therefore, the Au nanoparticles used in this research were fabricated with the method of sputtering, and SiO2 nanorods were employed as skeletons to carry more Au nanoparticles in three-dimensional space. According to the previous studies [7], oblique Ag nanorods performed a strong SERS effect. This result leads to the idea that Au nanoparticles decorating on oblique SiO2 nanorods may be a good SERS substrate. Basing on this idea, vertical and oblique SiO2 nanorods were deposited as Fig. 1a, b showed, respectively. To obtain the substrate with the best SERS effect, the amount of Au nanoparticles adhered on the nanorods was adjusted by altering the sputtering time. A BPE solution of 1 × 10−4 M was employed to characterize the SERS effect of the samples with a different amount of Au nanoparticles decorated on the vertical and oblique SiO2 nanorods. Figure 2a b both showed the phenomenon that the SERS effect of the samples improved with the amount of adhering Au nanoparticles until the sputtering time of 240 s, and then, the Raman peaks’ intensity of BPE decreased a little when prolonging the sputtering time. The reason maybe lies in the morphology of Au nanoparticles. When too many Au nanoparticles gather on the top of SiO2 nanorods, they would form larger particles and prevent the incident laser from reaching the Au nanoparticles adhering on the side of the nanorods. Besides, the localized electric field would be weaker on the smoother surface of larger Au nanoparticles [31]. To compare the SERS effect of the substrates employing vertical and oblique SiO2 nanorods as skeletons, the intensity of the peak at 1200 cm−1 was marked in Fig. 2c. It could be observed that the variation laws of the SERS effect of samples employing vertical and oblique SiO2 nanorods as skeletons along with Au sputtering time are similar, and vertical nanorods skeletons contributed more to the SERS effect. This result’s difference with the initial guess could be explained according to the SEM photos of the substrates which were fabricated by depositing Au nanoparticles for 240 s on vertical (Fig. 3a) and oblique (Fig. 3b) SiO2 nanorods. Au nanoparticles adhering on the top of vertical nanorods were discrete, whereas the particles on the top of oblique nanorods formed lines which would generate a weaker localized electric field. Meanwhile, nanoparticles on the side of the oblique nanorods would be blocked so that their SERS effect could not work. Though the oblique SiO2 nanorods provided a larger surface to load Au nanoparticles, they were not suitable to act as skeletons on SERS substrates.

Fig. 2.

Fig. 2

Open in a new tab

SERS spectra of 1 × 10−4 M BPE adsorbed on substrates of a vertical and b oblique SiO2 nanorods sputtered with Au nanoparticles for 60, 90,…, 360 s. c Intensity of characteristic Raman peak of BPE at 1200 cm−1 measured with all kinds of SERS substrate samples. d SERS spectra of 1 × 10−6, 1 × 10−7, 1 × 10−8, and 1 × 10−9 M BPE measured with the vertical SiO2 NRs@ Au NPs SERS substrate whose Au sputtering time is 240 s. All of the spectra were average data of spectra measured on five positions randomly selected on each SERS substrate

Fig. 3.

Fig. 3

Open in a new tab

SEM morphology of SERS substrate samples fabricated by sputtering Au nanoparticles for 240 s on a vertical and b oblique SiO2 nanorods. c TEM morphology of SiO2 nanorods sputtered by Au for 240 s. The inset is the electron diffraction pattern of the sample. d HRTEM of Au nanoparticles decorated on SiO2 nanorod

The best SiO2 NRs@ Au NPs SERS substrate fabricated by sputtering Au for 240 s on vertical nanorods was measured with BPE solution. On the SERS spectra of BPE in the concentrations of 1 × 10−6, 1 × 10−7, 1 × 10−8, and 1 × 10−9 M in Fig. 2c, the characteristic peaks could be recognized. The LOD for BPE could reach 1 × 10−9 M, and the enhancement factor was estimated as about 108, which demonstrated the optimized SERS substrate was quite effective. The effectiveness should be attributed to abundant Au nanoparticles adhering on the whole nanorods, as the TEM photo (Fig. 3c) and HRTEM photo (Fig. 3d) showed.

The optimized SiO2@Au SERS substrate was then applied to detect trace monochlorobiphenyl. Firstly, SERS spectra of 1 × 10−5, 5 × 10−6, and 1 × 10−6 M 4-CB were measured. In Fig. 4a, characteristic peaks at 760, 1000, 1090, and 1274 cm−1 were assigned to ring deformation, ring trigonal breathing, C-Cl stretching, and C-C bridge-stretching mode, respectively [32, 33], could be observed. The LOD of 1 × 10−6 M obtained without the assistance of surface modification was actually satisfactory [32, 34].

Fig. 4.

Fig. 4

Open in a new tab

a SERS spectra of 1 × 10−5, 5 × 10−5, and 1 × 10−6 M 4-CB measured with the substrate fabricated by sputtering Au for 240 s on SiO2 nanorods. b SERS spectra of 1 × 10−4 M 4-CB repeatedly detected and washed. c PCA score plot of SERS spectra of 4-CB repeatedly detected and washed. d SERS spectra of 1 × 10−4 M 2-CB, 3-CB, and 4-CB repeatedly detected and washed. All of the spectra were average data of spectra measured on three positions randomly selected on each SERS substrate

Moreover, the SiO2@Au SERS substrate was used repeatedly to detect trace monochlorobiphenyl. The characteristic peaks of 4-CB detected with an as-deposited SERS substrate in Fig. 4b were significantly stronger than the ones detected after the SERS substrate washed by acetone. However, it is nice to see that the Raman signal intensity kept nearly constant for the following several times of re-detection. Besides, there was almost no characteristic peaks of 4-CB after the SERS substrate was washed, which showed that the substrate could be cleaned easily, benefiting from the weak forces between the CB molecules and the Au nanoparticles rather than the strong van der Waals force caused by surface modification molecules. With the chemometrics method of PCA, the reusability of the SERS substrate was analyzed quantitatively. Employing the spectra of 4-CB measured at the first time and the as-deposited SERS substrate as the calibration data, a PCA model was established and the score plot of principal component 1 (PC1) and PC2 was exhibited in Fig. 4c. Judging from the variance contribution, PC1 has already reflected most information of the spectra differences. Therefore, the reusing effect could be represented by the rate of PC1 score change which should be calculated through dividing the PC1 score difference between the re-detected and the as-deposited substrate spectra by the difference between the firstly detected and the as-deposited substrate spectra. As Table 1 shows, the 4-CB re-detection and cleaning effect of the SERS substrate are both satisfactory.

Table 1.

Rate of PC1 score change of 4-CB re-detection spectra and acetone-washed SERS substrate spectra

4-CB detection order 2nd time 3rd time 4th time 5th time 6th time
Rate of PC1 score change (%) 52.78 44.00 37.55 27.50 33.25
Acetone-washing order 1st time 2nd time 3rd time 4th time 5th time
Rate of PC1 score change (%) 11.02 10.47 6.65 5.52 5.82
Open in a new tab

Furthermore, the SERS substrate was applied to re-detect different congeners of monochlorobiphenyl. Observing from Fig. 4d, CB molecules could be washed away nearly completely, and other kinds of CB molecules could be detected even if the SERS substrate had been used several times. These spectra indicated that analytes of different chemical structures could also be detected with the reused substrate, without interference by other kinds of analytes, which widened the application range of the reusable SERS substrate.

Conclusions

In this research, the SiO2 NRs@ Au NPs SERS substrate was designed and optimized by adjusting the morphology of nanorods and nanoparticles. Resultingly, the SERS substrate performed an enhancement factor of about 108, and its LOD for 4-CB could reach 1 × 10−6 M, due to the great amount of “hot spots” and its directly contacting analytes. This kind of SERS substrate fabricated completely with physical methods could be reused to detect trace CB molecules of the same or different chemical structures, through easy cleaning treatments, because of its weak adsorption for CB compared to the stronger interaction existing on the surface modified substrates. By PCA method, the re-detection and cleaning effect of the SERS substrate was characterized quantitatively, and the performance of the substrate was quite excellent.

Acknowledgements

The authors are very grateful to the financial support by the National Basic Research Program of China (973 program, Grant No. 2013CB934301), the National Natural Science Foundation of China (Grant No. 51228101, No. 51531006 and No. 51572148), the Research Project of Chinese Ministry of Education (Grant No. 113007A), and the Tsinghua University Initiative Scientific Research Program. 

Footnotes

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

MH carried out the experiments. MH, YH, LM, and ZZ participated in the design of the study. MH and ZZ conceived of the study and participated in its design and coordination and helped to draft the manuscript. All authors read and approved the final manuscript.

Authors’ information

MH, YH, and LM are PhD candidates at the School of Materials Science and Engineering, Tsinghua University.

ZZ is the head of the School of Materials Science and Engineering, Tsinghua University.

Contributor Information

Mengjing Hou, Email: houmj11@mails.tsinghua.edu.cn.

Yu Huang, Email: huang-y07@mails.tsinghua.edu.cn.

Lingwei Ma, Email: 13120172565@163.com.

Zhengjun Zhang, Phone: +86-10-62797033, Email: zjzhang@tsinghua.edu.cn.

References

  • 1.Vallejo M, Román MFS, Ortiz I, Irabien A. Overview of the PCDD/Fs degradation potential and formation risk in the application of advanced oxidation processes (AOPs) to wastewater treatment. Chemosphere. 2015;118:44–56. doi: 10.1016/j.chemosphere.2014.05.077. [DOI] [PubMed] [Google Scholar]
  • 2.Duk-Hee L, Miquel P, Jacobs DR, Vandenberg LN. Chlorinated persistent organic pollutants, obesity, and type 2 diabetes. Endocr Rev. 2014;35(4):557–601. doi: 10.1210/er.2013-1084. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 3.Guo H, Jiao T, Zhang Q, Guo W, Peng Q, Yan X. Preparation of graphene oxide-based hydrogels as efficient dye adsorbents for wastewater treatment. Nanoscale Res Lett. 2015;10(1):931. doi: 10.1186/s11671-015-0931-2. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 4.Oost RVD, Beyer J, Vermeulen NPE. Fish bioaccumulation and biomarkers in environmental risk assessment: a review. Environ Toxicol Pharmacol. 2003;13(2):57–149. doi: 10.1016/S1382-6689(02)00126-6. [DOI] [PubMed] [Google Scholar]
  • 5.Evanthia DK, Jean-Pierre B, Giudice LC, Russ H, Prins GS, Soto AM, et al. Endocrine-disrupting chemicals: an Endocrine Society scientific statement. Endocr Rev. 2009;30(4):293–342. doi: 10.1210/er.2009-0002. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 6.An Q, Zhang P, Li JM, Ma WF, Guo J, Hu J, et al. Silver-coated magnetite-carbon core-shell microspheres as substrate-enhanced SERS probes for detection of trace persistent organic pollutants. Nanoscale. 2012;4(16):5210–6. doi: 10.1039/c2nr31061a. [DOI] [PubMed] [Google Scholar]
  • 7.Zhou Q, Yang Y, Ni J, Li Z, Zhang Z. Rapid detection of 2, 3, 3′, 4, 4′-pentachlorinated biphenyls by silver nanorods-enhanced Raman spectroscopy. Phys E. 2010;42:1717–20. doi: 10.1016/j.physe.2010.01.030. [DOI] [Google Scholar]
  • 8.I-Fang C, Tzu-Ying C, Rong-Ji L, Hung-Wei W. Rapid identification of bacteria utilizing amplified dielectrophoretic force-assisted nanoparticle-induced surface-enhanced Raman spectroscopy. Nanoscale Res Lett. 2014;9(7):324. doi: 10.1186/1556-276X-9-324. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 9.Jiang M, Qian Z, Zhou X, Xin X, Wu J, Chen C, et al. (2014) CTAB micelles assisted rGO–AgNP hybrids for SERS detection of polycyclic aromatic hydrocarbons. Phys Chem Chem Phys. 17(33):21158–63 [DOI] [PubMed]
  • 10.Tang H, Meng G, Huang Q, Zhang Z, Huang Z, Zhu C. Arrays of cone-shaped ZnO nanorods decorated with Ag nanoparticles as 3D surface-enhanced Raman scattering substrates for rapid detection of trace polychlorinated biphenyls. Adv Funct Mater. 2012;22(1):218–24. doi: 10.1002/adfm.201102274. [DOI] [Google Scholar]
  • 11.Willets KA, Duyne RPV. Localized surface plasmon resonance spectroscopy and sensing. Annu Rev Phys Chem. 2007;58:267–97. doi: 10.1146/annurev.physchem.58.032806.104607. [DOI] [PubMed] [Google Scholar]
  • 12.Pieczonka NPW, Aroca RF. Single molecule analysis by surfaced-enhanced Raman scattering. Chemsocrev. 2008;37(5):946–54. doi: 10.1039/b709739p. [DOI] [PubMed] [Google Scholar]
  • 13.Chen XJ, Cabello G, Wu DY, Tian ZQ. Surface-enhanced Raman spectroscopy toward application in plasmonic photocatalysis on metal nanostructures. J Photochem Photobiol C Photochem Rev. 2014;21:54–80. doi: 10.1016/j.jphotochemrev.2014.10.003. [DOI] [Google Scholar]
  • 14.Sheng-Qing Z, Tong Z, Xin-Li G, Xiao-Yang Z. Self-assembly of large-scale gold nanoparticle arrays and their application in SERS. Nanoscale Res Lett. 2014;9(1):114. doi: 10.1186/1556-276X-9-114. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 15.Leonardo S, Marc CP, Giner-Casares JJ, Judith L, Liz-Marzán LM. Monodisperse gold nanotriangles: size control, large-scale self-assembly, and performance in surface-enhanced Raman scattering. ACS Nano. 2014;8(6):5833–42. doi: 10.1021/nn500727w. [DOI] [PubMed] [Google Scholar]
  • 16.Lai Y, Pan W, Zhang D, Zhan J. Silver nanoplates prepared by modified galvanic displacement for surface-enhanced Raman spectroscopy. Nanoscale. 2011;3(5):2134–7. doi: 10.1039/c0nr01030h. [DOI] [PubMed] [Google Scholar]
  • 17.Fan W, Lee YH, Pedireddy S, Zhang Q, Liu T, Ling XY. Graphene oxide and shape-controlled silver nanoparticle hybrids for ultrasensitive single-particle surface-enhanced Raman scattering (SERS) sensing. Nanoscale. 2014;6(9):4843–51. doi: 10.1039/c3nr06316j. [DOI] [PubMed] [Google Scholar]
  • 18.Chiolerio A, Virga A, Pandolfi P, Martino P, Rivolo P, Geobaldo F, et al. Direct patterning of silver particles on porous silicon by inkjet printing of a silver salt via in-situ reduction. Nanoscale Res Lett. 2012;7(35):1–7. doi: 10.1186/1556-276X-7-502. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 19.Santoro G, Yu S, Schwartzkopf M, Zhang P, Koyiloth Vayalil S, Risch JFH, et al. Silver substrates for surface enhanced Raman scattering: correlation between nanostructure and Raman scattering enhancement. Appl Phys Lett. 2014;104(24):243107. doi: 10.1063/1.4884423. [DOI] [Google Scholar]
  • 20.Hou C, Meng G, Huang Q, Zhu C, Huang Z, Chen B, et al. Ag-nanoparticle-decorated Au-fractal patterns on bowl-like-dimple arrays on Al foil as an effective SERS substrate for the rapid detection of PCBs. Chem Commun. 2013;50(5):569–71. doi: 10.1039/C3CC46878J. [DOI] [PubMed] [Google Scholar]
  • 21.Lamberti A, Virga A, Angelini A, Ricci A, Descrovi E, Cocuzza M, et al. Metal–elastomer nanostructures for tunable SERS and easy microfluidic integration. Rsc Adv. 2014;5:4404–10. doi: 10.1039/C4RA12168F. [DOI] [Google Scholar]
  • 22.Van DBM, Birnbaum L, Bosveld AT, Brunström B, Cook P, Feeley M, et al. Toxic equivalency factors (TEFs) for PCBs, PCDDs, PCDFs for humans and wildlife. Environ Health Persp. 1998;106(12):775–92. doi: 10.1289/ehp.98106775. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 23.Gomes HI, Dias-Ferreira C, Ribeiro AB. Overview of in situ and ex situ remediation technologies for PCB-contaminated soils and sediments and obstacles for full-scale application. Sci Total Environ. 2013;445:237–60. doi: 10.1016/j.scitotenv.2012.11.098. [DOI] [PubMed] [Google Scholar]
  • 24.Wang ZW, Meng G, Huang Z, Li Z, Zhou Q, Wang ZW, et al. (2014) Ag-nanoparticles-decorated porous ZnO-nanosheets grafted on carbon fiber cloth as effective SERS substrates. Nanoscale 6:15280–85 [DOI] [PubMed]
  • 25.Qian Y, Meng G, Huang Q, Zhu C, Huang Z, Sun K, et al. Flexible membranes of Ag-nanosheet-grafted polyamide-nanofibers as effective 3D SERS substrates. Nanoscale. 2014;6(9):4781–8. doi: 10.1039/c3nr06483b. [DOI] [PubMed] [Google Scholar]
  • 26.Lu Y, Huang Q, Meng G, Wu L, Zhang J. Label-free selective SERS detection of PCB-77 based on DNA aptamer modified SiO2@Au core/shell nanoparticles. Analyst. 2014;139:3083–7. doi: 10.1039/c4an00197d. [DOI] [PubMed] [Google Scholar]
  • 27.Bantz KC, Haynes CL. Surface-enhanced Raman scattering detection and discrimination of polychlorinated biphenyls. Vib Spectrosc. 2009;50(1):29–35. doi: 10.1016/j.vibspec.2008.07.006. [DOI] [Google Scholar]
  • 28.Moskovits M. Surface-enhanced Raman spectroscopy: a brief retrospective. J Raman Spectrosc. 2005;36(6-7):485–96. doi: 10.1002/jrs.1362. [DOI] [Google Scholar]
  • 29.Lim DK, Jeon KS, Kim HM, Nam JM, Suh YD. Nanogap-engineerable Raman-active nanodumbbells for single-molecule detection. Nat Mater. 2010;9(1):60–7. doi: 10.1038/nmat2596. [DOI] [PubMed] [Google Scholar]
  • 30.Robbie K, Brett MJ. Sculptured thin films and glancing angle deposition: growth mechanics and applications. J Vac Sci Technol A Vac Surfaces Films. 1997;15(3):1460–5. doi: 10.1116/1.580562. [DOI] [Google Scholar]
  • 31.Njoki PN, Lim IS, Mott D, Park H, Khan B, Mishra S, et al. Size correlation of optical and spectroscopic properties for gold nanoparticles. J Phys Chem C. 2007;111(40):14664–9. doi: 10.1021/jp074902z. [DOI] [Google Scholar]
  • 32.Tang H, Meng G, Huang Q, Zhu C, Huang Z, Li Z, et al. Urchin-like Au-nanoparticles@Ag-nanohemisphere arrays as active SERS-substrates for recognition of PCBs. Rsc Adv. 2014;4(38):19654–7. doi: 10.1039/c4ra01156b. [DOI] [Google Scholar]
  • 33.Lu Y, Yao G, Sun K, Huang Q. β-Cyclodextrin coated SiO2@Au@Ag core-shell nanoparticles for SERS detection of PCBs. Phys Chem Chem Phys. 2015;17:21149–57. doi: 10.1039/C4CP04904G. [DOI] [PubMed] [Google Scholar]
  • 34.Zhu C, Meng G, Huang Q, Huang Z. Vertically aligned Ag nanoplate-assembled film as a sensitive and reproducible SERS substrate for the detection of PCB-77. J Hazard Mater. 2012;211-212(2):389–95. doi: 10.1016/j.jhazmat.2011.07.118. [DOI] [PubMed] [Google Scholar]

Articles from Nanoscale Research Letters are provided here courtesy of Springer

RESOURCES