Skip to main content
PMC home page
Scientific Reports logoLink to Scientific Reports
. 2016 Mar 31;6:23786. doi: 10.1038/srep23786

Decoherence spectroscopy with individual two-level tunneling defects

Jürgen Lisenfeld 1,a, Alexander Bilmes 1, Shlomi Matityahu 2, Sebastian Zanker 3, Michael Marthaler 3, Moshe Schechter 2, Gerd Schön 3, Alexander Shnirman 4,5, Georg Weiss 1, Alexey V Ustinov 1,6,7
PMCID: PMC4815015  PMID: 27030167

Abstract

Recent progress with microfabricated quantum devices has revealed that an ubiquitous source of noise originates in tunneling material defects that give rise to a sparse bath of parasitic two-level systems (TLSs). For superconducting qubits, TLSs residing on electrode surfaces and in tunnel junctions account for a major part of decoherence and thus pose a serious roadblock to the realization of solid-state quantum processors. Here, we utilize a superconducting qubit to explore the quantum state evolution of coherently operated TLSs in order to shed new light on their individual properties and environmental interactions. We identify a frequency-dependence of TLS energy relaxation rates that can be explained by a coupling to phononic modes rather than by anticipated mutual TLS interactions. Most investigated TLSs are found to be free of pure dephasing at their energy degeneracy points, around which their Ramsey and spin-echo dephasing rates scale linearly and quadratically with asymmetry energy, respectively. We provide an explanation based on the standard tunneling model, and identify interaction with incoherent low-frequency (thermal) TLSs as the major mechanism of the pure dephasing in coherent high-frequency TLS.

Although the existence of two-level tunneling systems in amorphous materials has been known for decades, they have attracted much renewed interest after their detrimental effect on the performance of microfabricated quantum devices was discovered. There is evidence that TLSs reside in surface oxides of thin-film circuit electrodes1, at disordered interfaces2, and in the tunnel barrier of Josephson junctions3. Since TLSs possess both electric and elastic dipole moments by which they couple to their environment, they generate noise in various devices ranging from microwave resonators and kinetic inductance photon detectors4 through single-electron transistors5 to even nanomechanical resonators6. In state-of-the-art superconducting qubits, interaction with individual TLSs constitutes a major decoherence mechanism, where they give rise to fluctuations in time7 and frequency8 of qubit relaxation rates. On the other hand, this strong interaction turns qubits into versatile tools for studying the distribution of TLS9,10, their physical origin11 and mutual interactions12 as well as their quantum dynamics13.

The omnipresence of TLSs interference is contrasted by a notable lack of certainty regarding the microscopic nature of the tunneling entity14. Figure 1a illustrates some proposed models of TLS formation in the amorphous tunnel barrier of a Josephson junction: the tunnelling of individual or small groups of atoms between two configurations15,16, displacements of dangling bonds, and hydrogen defects17. Near the interface with superconducting electrodes, TLSs may also arise from bound electron/hole Andreev states18 or Kondo-fluctuators19.

Figure 1. Models of two-level systems (TLSs) in the Josephson junction of a superconducting qubit.

Figure 1

Open in a new tab

(a) Schematic of the phase qubit circuit used in this work and illustration of proposed TLS mechanisms: tunnelling atoms, trapped electrons, dangling bonds, and hydroxide defects. (b) Sketch of the TLS eigenfunctions in a double-well potential that is characterized by the strain-dependent asymmetry energy ε and the tunnel coupling Δ. (c) Potential energy and indication of the two lowest eigenstates of the phase qubit.

In this work, we present first direct measurements of the decoherence rates of individual TLSs in dependence of their strain-tuned internal asymmetry energy parameter. Our experiment provides unprecedented information about the spectrum of the environment to which a TLS couples and the nature of this coupling.

Without referring to a particular microscopic mechanism, the standard tunnelling model20,21 assumes the potential energy of TLSs to have the form of a double-well along a suitable configurational coordinate, giving rise to quantum mechanical eigenstates that are superpositions of the particle’s position as illustrated in Fig. 1b).

To study the quantum state evolution of individual TLSs, we exploit the strong interaction between a superconducting phase qubit and defects residing in the tunnel barrier of its Josephson junction3. Figure 1a shows the circuit schematic of the qubit, whose potential energy is tuned via an applied magnetic flux to adjust the energy splitting Eq between the two lowest qubit states as indicated in Fig. 1c. A TLS is read out by tuning the unexcited qubit into resonance, hereby realizing a coherent swap operation that maps the TLS’ quantum state onto the qubit12. Subsequently, a short flux pulse is applied to measure the qubit population probability P(|1〉)22 which directly reflects the population of the TLS’ excited state. In our case, the TLS signal is limited by energy relaxation that occurs in the qubit at a characteristic time of Inline graphic during the readout sequence.

A probed TLS is characterized by the tunnelling energy Δp and the strain-dependent asymmetry energy εp (index p stands here for “probed”). In our experiments, we tune the asymmetry energy in-situ by slightly bending the sample chip using a piezo actuator23, resulting in εp(V) = ηp · (V − V0,p) where V is the applied piezo voltage and V0,p the voltage at which the probed TLS becomes symmetric. The coefficient ηp is given by ηp = γp∂ϵ/∂V, where γp is the deformation potential which indicates how strongly the probed TLS couples to the applied strain. The strain is denoted by ϵ = δL/L and we estimate ∂ϵ/∂V ≈ 10−6/Volt based on results from a calibration of the piezo elongation per applied voltage and finite-elements-simulation of the mechanical chip deformation23. The TLS Hamiltonian reads

graphic file with name srep23786-m2.jpg

with the Pauli matrices Inline graphic and Inline graphic. Diagonalization results in the energy difference between the TLS eigenstates Inline graphic, with Planck’s constant ħ and the TLS resonance frequency ω10. We defined the Pauli matrix Inline graphic in the eigenbasis of the TLS, which acts on the eigenstates as Inline graphic.

Experiment

To measure TLS decoherence rates as a function of their asymmetry energy, we first apply our swap spectroscopy method12 to obtain an overview of the TLS frequency distribution in the sample. We then select a TLS whose symmetry point lies in the experimentally accessible strain range and perform microwave spectroscopy to calibrate its resonance frequency as a function of strain (see Fig. 3a). From a hyperbolic fit, we obtain the TLS’ tunnelling energy Δp, its asymmetry εp(V) as a function of the applied piezo voltage, and the deformation potential γp. We then apply standard resonant microwave pulse sequences illustrated in the insets of Fig. 2 to observe the TLS’ coherent state evolution in the time domain13. After a calibration of the driving strength by observing Rabi oscillations (Fig. 2a), we measure the energy relaxation rate Γ1 ≡ 1/T1 by exciting the TLS with a π-pulse and fitting the decaying state population with an exponential ∝ exp(−Γ1 · t) as shown in Fig. 2b. The experimental results on Γ1 are summarized in Fig. 3b.

Figure 3. Spectroscopy and results of decoherence measurements, obtained on four TLSs.

Figure 3

Open in a new tab

(a) Defect swap-spectroscopy, indicating the resonance frequencies of TLSs by a reduction δP of the qubit population probability (dark traces in color-coded data). Superimposed dots are obtained from microwave spectroscopy, to which hyperbolic fits (dashed lines) result in the static TLS parameters. (b) Energy relaxation rate Γ1. (c) Effective dephasing times T2,R (blue) and T2,E (green), measured using the Ramsey and spin-echo protocol, respectively. The thin black line indicates 2 · T1. (d) Pure dephasing rates calculated from the data in (b,c). Fitting curves (solid and dashed lines) are discussed in the text.

Figure 2. Quantum dynamics of TLS3.

Figure 2

Open in a new tab

Each panel shows a measurement near the TLS symmetry point (red) and at εp = 2π × 1 GHz (blue). Insets depict the sequence of applied microwave (μw) and flux pulses, where the latter realize a swap operation to map the TLS state onto the qubit plus a qubit readout pulse. (a) Rabi oscillations. (b) Energy relaxation to determine the T1 time. (c) Ramsey fringes to obtain the dephasing time T2,R. (d) Spin-echo measurement, resulting in the dephasing time T2,E. Blue curves in (a,c) were shifted by 0.3 for visibility. Panels (a–c) show raw data of the measured qubit population probability P(|1〉), whose reduced visibility is due to qubit energy relaxation during the TLS readout process.

Next, we measure dephasing using the Ramsey (see Fig. 2c) and the spin-echo protocol (see Fig. 2d). In both of these protocols, the TLS is initalized into a superposition of the eigenstates using a π/2-pulse. The decay of this superposition assumes the general functional form exp[−Γ1t/2 − xi(t)], where i = R for Ramsey and i = E for spin-echo. The dephasing functions xR(t) and xE(t) depend strongly on the environment’s fluctuation spectrum and will be in the focus of our discussion below. Further details of these experiments are contained in Supplementary Information I.

Our time-domain data do not allow us to determine the exact functional form of the dephasing signal, because only a few oscillation periods are observed at asymmetry energies where Γφ,R dominates over Γ1 (see Fig. 2c). Since this renders fits to a linear dependence xi = Γφ,it to appear practically indistinguishable from a Gaussian decay xi = (Γφ,it)2, we estimate the pure dephasing rates Γφ,i in the linear approximation and deduce their functional form from their strain dependence. Figure set 3c summarizes the extracted effective dephasing times T2,R = (Γ1/2 + Γφ,R)−1 and T2,E = (Γ1/2 + Γφ,E)−1 of four different TLSs, which were measured in the same qubit sample. Using the previously obtained data on Γ1, we extract the pure dephasing rates Γφ,R and Γφ,E, which are shown in Fig. 3d. Additional data obtained from other TLSs are included in the Supplementary Information I.

Energy relaxation

For all investigated TLSs, we observe (see Fig. 3b) that their energy relaxation rates exhibit a strain-dependent structure that appears symmetric with respect to the point of lowest TLS energy εp = 0. This indicates that the spectral density of the underlying relaxing modes depends only on frequency and is independent of the applied strain. Therefore, we conclude that the dominant relaxation mechanism of the probed TLSs is not due to their near-resonant coupling to other TLSs, because those would also be detuned by the applied strain and thus are expected to generate non-symmetric patterns in Γ1. This notion is further supported by the finding that strong mutual TLS interactions are rarely observed for our sample12.

If the noise spectral density was constant around ω = Δp/ħ, the strain dependence of Γ1 for Inline graphic would be given (see Supplementary Information II) by Inline graphic, i.e. it would show a weak parabolic decrease around the symmetry point. As seen in Fig. 3b, such a scaling is obscured by the pronounced frequency-dependence of the noise spectral density. One may assume that this structure originates from the coupling to phonon modes which should have a discrete spectrum since the lateral size of the junction’s dielectric is comparable to the wavelength of high-frequency phonons. Indeed, a comparison of Γ1 of different TLS as a function of their resonance frequencies (see Supplementary Information I) reveals a common maximum at 7.4 GHz for 3 out of 5 investigated TLS, indicating that those TLS may be coupled to the same phononic mode24.

Pure dephasing

The observed pure dephasing “rates” Γφ,R and Γφ,E show the following main features: a) the echo protocol is extraordinarily efficient, so that the ratios Γφ,R/Γφ,E reach very large values (see Table 1). b) the εp-dependence of the echo dephasing rate is clearly parabolic: Inline graphic; c) close to the symmetry point, the εp-dependence of the Ramsey dephasing rate Γφ,R could be fitted to a linear behavior, Γφ,R ∝ |εp|, in all TLSs. In the Supplementary Information II, we review shortly the well known results in order to identify possible sources of pure dephasing. We conclude that an environment characterized by white noise or by 1/f noise could not explain the experimental findings.

Table 1. Measured TLS parameters.

TLS Δp/2π (GHz) (∂εp/∂V)/2π (MHz/V) V0,p (V) D|| (eÅ) T1 @ εp = 0 (μs) A (μs)−1 B (μs)−1 Γφ,R/Γφ,E
1 7.075 115.5 −18.01 0.37 0.44 14 7.7 8
2 7.335 180.3 7.64 0.29 0.99 4.4 9.1 17
3 6.947 156.7 24.10 0.26 2 3.3 10.5 22
4 6.217 146.8 38.65 0.46 3.2 0.0 13.3 ∞
Open in a new tab

Static values Δp, ∂εp/∂V and V0,p are obtained from a spectroscopic fit of ω10(V). D‖ is the component of the TLS’ dipole moment parallel to the electric field in the junction, extracted from the measured coupling strength to the qubit. T1 is quoted at the TLS’ symmetry point. Parameters A and B result from fits of the measured dephasing rates in the region |εp|/2π < 1 GHz to the spin-echo dephasing rate Γφ,E = A · (εp/Ep)2 and Ramsey dephasing rate Γφ,R = A · (εp/Ep)2 + B · (|εp|/Ep), respectively. The last column gives the approximate ratio between Ramsey and echo rates, estimated in the region |εp|/2π < 1 GHz.

Interpretation of the experimental results

We argue that the experimental observations can be explained in the framework of the standard tunnelling model20,21. In contrast to the probed high frequency TLS, whose energy splitting is much higher than the thermal energy, Inline graphic, the TLSs responsible for pure dephasing are “thermal”, i.e. their energy splittings are lower than kBT so that they switch randomly between their states. We argue that the switching rates of thermal TLSs are very low, leading to the essentially non-Gaussian noise that has a spectral power more singular than 1/f. In this case, the Ramsey dephasing is dominated typically by the nearest neighbouring thermal TLS25,26,27. Since the asymmetry energies of the thermal TLSs also change with strain, one expects that some TLSs will go in and out of the group of relevant thermal TLSs as the strain is varied. Thus, the dominant decohering TLS will be replaced by another thermal TLS when the change of its asymmetry energy is on the order of the thermal energy kBT (that is, ~2π × 1 GHz). This gives rise to a non-regular behavior, reflected in a change of slope or small irregularities in the Ramsey dephasing rate as a function of strain as seen in Fig. 3d. Thus, we shall focus on a region of order |εp| < kBT ≈ 2π × 1 GHz (here and in other places we use ħ = 1) near the symmetry point and study the dephasing by a single thermal TLS. In this scenario, close to the symmetry point Γφ,R ∝ |εp| in the general case, or Γφ,R ∝ |εp|2 in the special case where the decohering TLS is near its own symmetry point. The dominant thermal TLS is almost completely eliminated by the echo protocol. This explains the very high efficiency of the echo technique. We argue that the echo dephasing rate due to the thermal TLSs is much lower than the one due to the residual white noise environment, which explains the observed Inline graphic.

Theory

In the standard tunnelling model each isolated TLS is described by a Hamiltonian Inline graphic as in Eq. (1), with the index p replaced by j. The asymmetry εj and tunneling energy Δj are assumed to be randomly distributed with a universal distribution function Inline graphic, where Inline graphic is a material dependent constant15. Each TLS is also characterised by its coupling γj to the strain field. Moreover, it is well established that TLSs interact via phonon-mediated interactions, which can be described by a low-energy effective Hamiltonian of the form28,29,30

graphic file with name srep23786-m16.jpg

with the interaction coefficients

graphic file with name srep23786-m17.jpg

Here Rij is the distance between the TLSs and ρ, c are the mass density and sound velocity, respectively. A central dimensionless parameter of the tunnelling model is the tunneling strength Inline graphic, where R0 and Inline graphic are the typical distance and typical interaction strength between nearest neighbour TLSs, respectively. The well-known similarity in the low-temperature properties of disordered solids is reflected in a universal value of C0 ≈ 10−3 31,32.

We consider now the probed TLS interacting with a set of thermal TLSs via the coupling mechanism of Eq. (2). Only the coupling terms involving the slow (non-rotating) variables of both the probed TLS, Inline graphic, and of the thermal TLSs, Inline graphic, are relevant for pure dephasing. Moreover, at frequencies relevant for pure dephasing, the operators Inline graphic can safely be replaced by classical stochastic processes τz,j(t) describing random switching between τz,j = ±1 with switching rate Γ1,j. Thus, the Hamiltonian of the probed TLS reduces effectively to

graphic file with name srep23786-m23.jpg

where Inline graphic. The effective couplings are given by

graphic file with name srep23786-m25.jpg

where Inline graphic and Inline graphic. Here Jj is the coupling strength (3) between the probed TLS and thermal TLS number j.

The theory of pure dephasing due to a coupling to an ensemble of TLSs is discussed in Supplementary Information II. Here we provide the qualitative estimates. The effect of a thermal TLS on the coherence properties of the probed TLS depends on the coupling vj and on the switching rate (relaxation rate) Γ1,j of the thermal TLS. We assume that the random transitions of each TLS are mainly due to their coupling to phonons, in which case the relaxation rate reads21,33

graphic file with name srep23786-m28.jpg

where cl and ct are the sound velocities of the longitudinal and transverse modes, respectively. The maximum switching rate Inline graphic among the thermal TLS for which Ej ≤ kBT (the TLSs with Ej > kBT are not thermal and do not give rise to low frequency noise) is obtained for Δj = Ej and Ej = kBT. Setting γj ≈ 1 eV and T = 35 mK10,15,23, we obtain Inline graphic.

Next, we estimate the typical coupling strength of the nearest thermal TLS, JT, by calculating the typical distance between the probed TLS and its nearest neighbouring thermal TLS in three and two dimensions (3D and 2D, respectively), and find (see Supplementary Information II)

graphic file with name srep23786-m31.jpg

where Inline graphic, with umin being a lower cutoff for the parameter u ≡ sin2 θ = (Δ/E)2 34, d ≈ 3 nm is the thickness of the tunnel dielectric, and we assumed the usual values C0 ≈ 10−3 and ξ ≈ 20.

The above estimates reveal that thermal TLSs satisfy Inline graphic. We recall the relation vj = Jj cos θj cos θp and take into account that, typically, cos θj = O(1). Thus, the closest thermal TLS is in the strong coupling regime, Inline graphic, except in the very close vicinity of the symmetry point εp = 0 of the probed TLS. Therefore, we should study the εp-dependence of the dephasing rates assuming the presence of strongly coupled thermal TLSs. Such a situation also provides an explanation for the effectiveness of the echo protocol. This is clearly illustrated by an example of dephasing caused by a single TLS with Inline graphic (we drop the TLS index j) discussed in ref. 26. While the Ramsey dephasing “rate” is of order v, the echo dephasing “rate” is of order Γ1 of the thermal TLS (see Supplementary Information II for details). Thus, in this case, Γφ,R ∝ |εp|, whereas Γφ,E is independent of the applied strain.

The situation is more involved in the case of an ensemble of thermal TLSs. Since the coupling strength between the TLSs scales with their distance r as 1/r3, the closest thermal TLS dominates the Ramsey dephasing. Averaging the decay function over the distribution function of TLSs is not appropriate, i.e., there is no self-averaging (see Supplementary Information II). The typical Ramsey decay is approximately characterized by an envelope function Inline graphic Inline graphic, with possible few oscillations due to a small number of decohering TLSs26. The Ramsey dephasing “rate” reads

graphic file with name srep23786-m38.jpg

In deriving Eq. (8), we assumed that the factor cos θj in Eq. (5) for the closest thermal TLS does not depend strongly on the applied strain. This assumption is valid in the most probable case, where the closest thermal TLS is not expected to be close to its own symmetry point (εj = 0) at the piezo voltage V = V0,p (i.e. at the same voltage for which the probed TLS is in its symmetry point). However, in the more special case in which the closest thermal TLS is near its symmetry point at V = V0,p, the Ramsey dephasing rate is expected to change quadratically with the piezo voltage, that is

graphic file with name srep23786-m39.jpg

This special situation could be of relevance for TLS1. Indeed, as one can observe in the leftmost column of Fig. 3d, a parabolic fitting could be performed here in a wider range of εp as compared to the shown linear fit.

For the echo decay due to a single strongly coupled thermal TLS, the dephasing rate is independent of εp. For an ensemble of TLSs it turns out that the decay function is not dominated by the closest TLS, but rather multiple TLSs contribute, i.e., there is self-averaging in this case (see Supplementary Information II). However, the theory predicts Γφ,E ∝ |εp|0.4 and Γφ,E ∝ |εp|0.5 in 2D and 3D, respectively, in disagreement with the experimental results that show a quadratic dependence of the echo dephasing rate. Moreover, the predicted order of magnitude is too small to explain the experimentally observed echo dephasing rate, i.e. the mechanism of interactions between TLSs is expected to yield echo efficiencies even stronger than those observed in our experiment. This is supported by the data obtained on TLS4 (see rightmost plot of Fig. 3d), for which the echo protocol is very efficient in the whole range of εp.

To explain the experimental findings we are forced to assume some extra white noise environment that leads (see Supplementary Information II) to

graphic file with name srep23786-m40.jpg

Such a white noise environment could result e.g. from fast relaxing TLSs30 or from non-equilibrium quasiparticles35,36. Quasiparticles are well known to induce decoherence in superconducting quantum devices. An estimate of the dephasing rate induced by non-equilibrium quasiparticles is in good agreement with the fitting parameter A (see Supplementary Information II).

The above contribution of the white noise [Eq. (10)] gives a similar contribution to the Ramsey dephasing rate. Thus, combining (8) with (10) we attempt to fit Γφ,R in Fig. 3d in the vicinity of the symmetry point (|εp|/2π < 1 GHz) using

graphic file with name srep23786-m41.jpg

As explained above, one should not expect a pure linear or parabolic behavior of the Ramsey dephasing rate on the whole range of εp. Being dominated by single thermal TLSs, the Ramsey dephasing rate is expected to exhibit a change of slope as the decohering TLSs go in and out of the set of thermal TLSs, that is when |εp|/2π > 1 GHz. Yet, in a typical case, one expects a linear behavior in a narrow vicinity of the symmetry point.

Table 1 summarizes the fitting parameters A and B as well as other extracted TLS parameters. According to our theory, the parameter B is associated with the coupling JT [Eqs (7) and (8)]. The estimations of the standard tunnelling model for JT in the 2D case are in good agreement with the fitting parameter B for all TLSs.

Summarizing, our measurements of TLS decoherence rates as a function of their asymmetry energy reveal that TLS relaxation occurs mainly due to their coupling to discrete phonon modes, while dephasing is dominated by their interaction with randomly fluctuating thermal TLS at low energies. Our theory predicts that thermal TLSs in the standard tunnelling model are characterized by Inline graphic, i.e. their coupling strength to the probed TLS exceeds their switching rate. Such TLSs produce noise which gives rise to an approximately linear dependence of the Ramsey dephasing rate of coherent TLS on the external strain (which, in more special cases, can also be quadratic). The Ramsey dephasing is dominated by a small number of thermal TLSs, which explains the observed irregularities in the Ramsey dephasing rate as a function of external strain. The order of magnitude of the measured Ramsey dephasing rate is in agreement with the theory. The strain dependence of the echo dephasing rate, on the other hand, can not be accounted for by the standard tunnelling model. Its explanation requires the presence of a white noise environment. This could consist e.g. of much faster fluctuators that are characterized by a weak interaction with the probed TLS, or non-equilibrium quasiparticles in the superconducting layers.

Methods

The phase qubit sample used in this work was fabricated in the group of J. M. Martinis at University of California, Santa Barbara (UCSB), as described in ref. 37. The qubit junction had an area of about 1 μm2, fabricated using aluminum as electrode material and its thermally grown oxide as a tunnel barrier. All data have been obtained at a sample temperature of about 35 mK. The mechanical strain was controlled by bending the sample chip with a piezo transducer as explained in ref. 23.

Additional Information

How to cite this article: Lisenfeld, J. et al. Decoherence spectroscopy with individual two-level tunneling defects. Sci. Rep. 6, 23786; doi: 10.1038/srep23786 (2016).

Supplementary Material

Supplementary Information
srep23786-s1.pdf (2MB, pdf)

Acknowledgments

We would like to thank J. M. Martinis (UCSB) for providing the qubit sample we measured in this work. We thank A. Würger, J. H. Cole and C. Müller for fruitful discussions. This work was supported by the Deutsche Forschungsgemeinschaft DFG (Grants SCHO 287/7-1, SH 81/2-1 and LI 2446/1-1) and by the German-Israeli Foundation (GIF Grant No. 1183-229.14/2011). Partial support by the Ministry of Education and Science of Russian Federation in the framework of Increase Competitiveness Program of the NUST MISIS (contract no. K2-2014-025 and K2-2015-002), as well as support from the Russian Science Foundation (contract no. 16-12-00095), are gratefully acknowledged. AS was supported by the Russian Science Foundation under Grant No. 14-42-00044.

Footnotes

Author Contributions The experiments were conceived by J.L., G.W. and A.V.U. and performed by J.L. and A.B. Dephasing by thermal TLS within the standard tunneling model was studied by S.M., A.S. and M.S. Dephasing due to quasiparticles was analyzed by S.Z., M.M. and G.S.

References

  1. Gao J. et al. Experimental evidence for a surface distribution of two-level systems in superconducting lithographed microwave resonators. Appl. Phys. Lett. 92, 152505 (2008). [Google Scholar]
  2. Quintana C. M. et al. Characterization and reduction of microfabrication-induced decoherence in superconducting quantum circuits. Appl. Phys. Lett. 105, 062601 (2014). [Google Scholar]
  3. Simmonds R. et al. Decoherence in Josephson phase qubits from junction Resonators. Phys. Rev. Lett. 93, 077003 (2004). [DOI] [PubMed] [Google Scholar]
  4. Zmuidzinas J. Superconducting Microresonators: Physics and Applications. Annu. Rev. Condens. Matter Phys. 3, 169–214 (2012). [Google Scholar]
  5. Pourkabirian A., Gustafsson M. V., Johansson G., Clarke J. & Delsing P. Nonequilibrium probing of two-level charge fluctuators using the step response of a single-electron transistor. Phys. Rev. Lett. 113, 256801 (2014). [DOI] [PubMed] [Google Scholar]
  6. Ahn K.-H. & Mohanty P. Quantum friction of micromechanical resonators at low temperatures. Phys. Rev. Lett. 90, 085504 (2003). [DOI] [PubMed] [Google Scholar]
  7. Müller C., Lisenfeld J., Shnirman A. & Poletto S. Interacting two-level defects as sources of fluctuating high-frequency noise in superconducting circuits. Phys. Rev. B 92, 035442 (2015). [Google Scholar]
  8. Barends R. et al. Superconducting quantum circuits at the surface code threshold for fault tolerance. Nature 508, 500 (2014). [DOI] [PubMed] [Google Scholar]
  9. Martinis J. M. et al. Decoherence in Josephson qubits from dielectric loss. Phys. Rev. Lett. 95, 210503 (2005). [DOI] [PubMed] [Google Scholar]
  10. Shalibo Y. et al. Lifetime and coherence of two-level defects in a Josephson junction. Phys. Rev. Lett. 105, 177001 (2010). [DOI] [PubMed] [Google Scholar]
  11. Cole J. H. et al. Quantitative evaluation of defect-models in superconducting phase qubits. Appl. Phys. Lett. 97, 252501 (2010). [Google Scholar]
  12. Lisenfeld J. et al. Observation of directly interacting coherent two-level systems in an amorphous material. Nat. Commun. 6, 6182 (2015). [DOI] [PMC free article] [PubMed] [Google Scholar]
  13. Lisenfeld J. et al. Measuring the temperature dependence of individual two-level systems by direct coherent control. Phys. Rev. Lett. 105, 230504 (2010). [DOI] [PubMed] [Google Scholar]
  14. Leggett A. J. & Vural D. C. “Tunneling two-level systems” model of the low-temperature properties of glasses: are “smoking-gun” tests possible? J. Phys. Chem. B 117, 12966–71 (2013). [DOI] [PubMed] [Google Scholar]
  15. Phillips W. A. Two-level states in glasses. Rep. Prog. Phys. 50, 1657 (1987). [Google Scholar]
  16. Agarwal K., Martin I., Lukin M. D. & Demler E. Polaronic model of two-level systems in amorphous solids. Phys. Rev. B 87, 144201 (2013). [Google Scholar]
  17. Holder A. M., Osborn K. D., Lobb C. J. & Musgrave C. B. Bulk and surface tunneling hydrogen defects in alumina. Phys. Rev. Lett. 111, 065901 (2013). [DOI] [PubMed] [Google Scholar]
  18. Faoro L., Bergli J., Altshuler B. L. & Galperin Y. M. Models of environment and T1 relaxation in Josephson charge qubits. Phys. Rev. Lett. 95, 046805 (2005). [DOI] [PubMed] [Google Scholar]
  19. Faoro L. & Ioffe L. B. Microscopic origin of critical current fluctuations in large, small, and ultra-small area Josephson junctions. Phys. Rev. B 75, 132505 (2007). [Google Scholar]
  20. Anderson P. W., Halperin B. I. & Varma C. Anomalous low-temperature thermal properties of glasses and spin glasses. Philos. Mag. 25, 1 (1972). [Google Scholar]
  21. Phillips W. A. Tunneling states in amorphous solids. J. Low Temp. Phys. 7, 351 (1972). [Google Scholar]
  22. Cooper K. B. et al. Observation of quantum oscillations between a Josephson phase qubit and a microscopic resonator using fast readout. Phys. Rev. Lett. 93, 180401 (2004). [DOI] [PubMed] [Google Scholar]
  23. Grabovskij G. J., Peichl T., Lisenfeld J., Weiss G. & Ustinov A. V. Strain Tuning of Individual Atomic Tunneling Systems Detected by a Superconducting Qubit. Science 338, 232–234 (2012). [DOI] [PubMed] [Google Scholar]
  24. Anghel D.-V. & Churochkin D. Anisotropic interaction of two-level systems with acoustic waves in disordered cubic crystals. Phys. Rev. B 78, 094202 (2008). [Google Scholar]
  25. Paladino E., Faoro L., Falci G. & Fazio R. Decoherence and 1/f noise in Josephson qubits. Phys. Rev. Lett. 88, 228304 (2002). [DOI] [PubMed] [Google Scholar]
  26. Galperin Y., Altshuler B. & Shantsev D. Low-frequency noise as a source of dephasing of a qubit. In Lerner I., Altshuler B. & Gefen Y. (eds.) Fundamental Problems of Mesoscopic Physics vol. 154 of NATO Science Series 141–165 (Springer: Netherlands,, 2004). [Google Scholar]
  27. Bergli J., Galperin Y. M. & Altshuler B. L. Decoherence in qubits due to low-frequency noise. New J. Phys. 11, 025002 (2009). [DOI] [PubMed] [Google Scholar]
  28. Black J. L. & Halperin B. I. Spectral diffusion, phonon echoes, and saturation recovery in glasses at low temperatures. Phys. Rev. B 16, 2879 (1977). [Google Scholar]
  29. Burin A. L., Natelson D., Osheroff D. D. & Kagan Y. Interactions between tunneling defects in amorphous solids. In Esquinazi P. (ed.) Tunneling Systems in Amorphous and Crystalline Solids (Springer, Berlin, 1998). [Google Scholar]
  30. Schechter M. & Stamp P. C. E. Inversion symmetric two-level systems and the low-temperature universality in disordered solids. Phys. Rev. B 88, 174202 (2013). [Google Scholar]
  31. Hunklinger S. & Raychaudhuri A. Chapter 3: Thermal and elastic anomalies in glasses at low temperatures. vol. 9 of Progress in Low Temperature Physics 265–344 (Elsevier, 1986). [Google Scholar]
  32. Pohl R. O., Liu X. & Thompson E. Low-temperature thermal conductivity and acoustic attenuation in amorphous solids. Rev. Mod. Phys. 74, 991–1013 (2002). [Google Scholar]
  33. Jäckle J. Ultrasonic attenuation in glasses at low temperatures. Z. Phys. 257, 212 (1972). [Google Scholar]
  34. Hunklinger S. Tunneling in amorphous solids. Cryogenics 28, 224–229 (1988). [Google Scholar]
  35. Martinis J. M., Ansmann M. & Aumentado J. Energy decay in superconducting Josephson-junction qubits from nonequilibrium quasiparticle excitations. Phys. Rev. Lett. 103, 097002 (2009). [DOI] [PubMed] [Google Scholar]
  36. Zanker S. & Marthaler M. Qubit dephasing due to quasiparticle tunneling. Phys. Rev. B 91, 174504 (2015). [Google Scholar]
  37. Steffen M. et al. State tomography of capacitively shunted phase qubits with high fidelity. Phys. Rev. Lett. 97, 050502 (2005). [DOI] [PubMed] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

Supplementary Information
srep23786-s1.pdf (2MB, pdf)

Articles from Scientific Reports are provided here courtesy of Nature Publishing Group

RESOURCES