Skip to main content
. Author manuscript; available in PMC: 2017 Oct 21.
Published in final edited form as: Analyst. 2016 Aug 3;141(20):5714–5721. doi: 10.1039/c6an01055e

Figure 2.

Figure 2

Fabrication of tissue and fluidic interfaces using 3D-printed templates. A) Image of a 3D-printed alignment container and a 6-well template for sculpting PDMS central reservoirs above SU-8 patterned microchannels. B) Cross-section of PDMS cured around an untreated 3D template and C) a template treated with THF vapours for 1 min. D) Cross-section of a typical PDMS microdevice. For clarity, only one microchannel sampling path is labelled.