Skip to main content
PMC home page
Nature Communications logoLink to Nature Communications
. 2017 May 2;8:15071. doi: 10.1038/ncomms15071

Facile access to potent antiviral quinazoline heterocycles with fluorescence properties via merging metal-free domino reactions

Felix E Held 1, Anton A Guryev 1, Tony Fröhlich 1, Frank Hampel 1, Axel Kahnt 2, Corina Hutterer 3, Mirjam Steingruber 3, Hanife Bahsi 3, Clemens von Bojničić-Kninski 4, Daniela S Mattes 4, Tobias C Foertsch 4, Alexander Nesterov-Mueller 4, Manfred Marschall 3, Svetlana B Tsogoeva 1,a
PMCID: PMC5418574  PMID: 28462939

Abstract

Most of the known approved drugs comprise functionalized heterocyclic compounds as subunits. Among them, non-fluorescent quinazolines with four different substitution patterns are found in a variety of clinically used pharmaceuticals, while 4,5,7,8-substituted quinazolines and those displaying their own specific fluorescence, favourable for cellular uptake visualization, have not been described so far. Here we report the development of a one-pot synthetic strategy to access these 4,5,7,8-substituted quinazolines, which are fluorescent and feature strong antiviral properties (EC50 down to 0.6±0.1 μM) against human cytomegalovirus (HCMV). Merging multistep domino processes in one-pot under fully metal-free conditions leads to sustainable, maximum efficient and high-yielding organic synthesis. Furthermore, generation of artesunic acid–quinazoline hybrids and their application against HCMV (EC50 down to 0.1±0.0 μM) is demonstrated. Fluorescence of new antiviral hybrids and quinazolines has potential applications in molecular imaging in drug development and mechanistic studies, avoiding requirement of linkage to external fluorescent markers.

Heterocycles are ubiquitous in bioactive compounds and routes to different substitution patterns are important to access the full substrate space. Here the authors report a route to 4,5,7,8-substituted antiviral fluorescent quinazolines, to allow cellular uptake visualization without external marker.

Quinazoline heterocycles are ubiquitous in pharmaceutical compounds and drugs. They are important subunits of a broad variety of natural products as well as synthetic pharmaceuticals possessing anti-inflammatory1, antiviral2, antimalarial3 and anticancer4 activities. The known quinazoline-based drugs, which are not demonstrating fluorescence properties, can be divided into four groups A–D (2,4,6,7-; 4,6,7-; 2,4,5,6- and 2,4,6,7,8-substituted quinazolines), representing four types of existing substitution patterns (Fig. 1a).

Figure 1. Quinazoline scaffolds with different substitution patterns.

Figure 1

Open in a new tab

(a) List of the selected corresponding non-fluorescent quinazoline-marketed drugs: Alfuzosin (adrenergic blocker), Bunazosin (antihypertensive agent), Prazosin (adrenergic blocker), Terazosin (adrenergic blocker), Erlotinib (anticancer agent), Gefitinib (anticancer agent), Vandetanib (tyrosine kinase inhibitor), Trimetrexane (dihydrofolate reductase inhibitor) and Trimazosin (antihypertensive agent). (b) Antiviral quinazolines with fluorescence properties developed in this work.

The synthesis of known quinazoline heterocycles by conventional ways is a hard work that implies many synthetic steps and expensive starting materials, and involves time-consuming and waste-producing isolation and purification of product intermediates4,5,6,7,8. The number of synthetic methods to afford quinazolines is, furthermore, restricted to the availability of the appropriate starting compounds. For this reason, development of new efficient and straightforward synthetic methods towards quinazoline heterocyclic compounds of value to medicinal chemistry, starting from simple precursors, is of high current demand. To our knowledge, the class of 4,5,7,8-substituted quinazolines (E-type, Fig. 1b) have not been prepared to date because of the lack of a synthetic route towards these compounds. Furthermore, no examples of fluorescent quinazolines have been reported so far. External fluorescent labels are usually employed to study the functions of quinazoline-based pharmacophores within cells. However, fluorescent markers can influence or change the properties of studied lead compounds and drugs. Therefore, the drug candidate should ideally display its own fluorescence to allow its cellular uptake visualization and without incorporation of external fluorescent labels. The motivation and desire to address these gaps prompted the research work we report here.

Recently, combined processes, where several fundamentally different catalytic reactions are joined in a one-pot protocol, were introduced9. Among known examples are combinations of (i) organocatalysis and transition–metal catalysis10, (ii) organocatalysis and silver or gold catalysis11,12,13 or (iii) organocatalysis and (photo)redox catalysis14,15. Even more efficient and economical methods towards heterocyclic compounds are domino processes16,17,18,19,20,21,22.

In terms of efficiency and sustainability, generation of bioactive heterocycles through multicomponent multistep reactions avoiding intermediate isolation and purification steps, is unbeatable. While examples of organocatalysed linear domino reactions17,18,20 and of a single branched domino process21 are known, surprisingly, combining them in one-pot is unprecedented, although such a multistep one-pot process would further reduce costs and waste production in the synthesis of versatile heterocycles.

Herein, we describe development of a combined process, which joins a new five-step branched domino reaction with two-step linear and subsequent three-step linear domino reactions. This new metal-free 10-step sequence, with only a single work up procedure and starting from simple and readily available compounds, results in new functionalized quinazolines of type E (Fig. 1b), which exceed the antiviral potency of the clinical reference drug ganciclovir23. Furthermore, selected fluorescent quinazolines were applied for synthesis of first artesunic acid–quinazoline hybrids, which are, remarkably, also fluorescent and display superior potency against HCMV (EC50 down to 0.1±0.0 μM) compared to that of their parent quinazolines (EC50 down to 4.6±0.9 μM) and artesunic acid (EC50 3.8±0.4 μM), as well as ganciclovir (EC50 2.6±0.5 μM). For all quinazoline compounds, cytotoxicity for primary human fibroblasts (HFFs; CC50) was undetectable at concentrations up to 100 μM, indicating that the new quinazolines and hybrid compounds are selective. Importantly, the fluorescent quinazolines could nicely be depicted both in extracellular and intracellular localizations when analysing primary HFFs and virus-infected cells using confocal laser-scanning microscopy. An accumulation of fluorescent quinazolines was mostly observed in cytoplasmic areas, thus visually indicating their efficient cellular uptake. These results open up new perspectives for molecular imaging in the drug development process and mechanistic studies, avoiding the requirement of linkage of external fluorescent labels to potential drug molecules.

Results

Proposed one-pot approach towards fluorescent quinazolines

Inspired by the power of the domino concept introduced by Tietze16,22, we envisioned the possibility of designing a multicomponent one-pot process, involving domino reactions, which might allow to generate quinazolines starting from simple precursors: aldehydes, nitroalkenes and malononitrile (Fig. 2). The proposed unprecedented quinazolines, bearing amino (donor) and cyano (acceptor) groups at the same time, were expected to demonstrate desirable fluorescence properties.

Figure 2. Proposed convenient synthesis of fluorescent quinazolines.

Figure 2

Open in a new tab

One-pot multistep synthetic approach towards 4,5,7,8-substituted quinazolines from simple compounds.

One-pot synthesis of cyclohexenes and 2,6-dicyanoanilines

We started by exploring a reaction of trans-β-nitrostyrene (1), benzaldehyde (2) and malononitrile (3; Figs 3 and 4a). Our most recent finding of an imidazole-catalysed six-step linear domino reaction of malononitrile with phenylethanal derivatives24 inspired us to apply imidazole as a catalyst also for this new transformation (Supplementary Fig. 1). To our delight, the domino process using dichloromethane as a solvent in presence of imidazole at room temperature resulted in highly functionalized cyclohexene derivative 4a. Structure and relative stereochemistry of isolated major diastereomer 4a was confirmed by X-ray analysis (Fig. 3).

Figure 3. Merging metal-free domino reactions.

Figure 3

Open in a new tab

Development of one-pot access to new 2,6-dicyanoaniline-based multichromophores and 4,5,7,8-substituted quinazolines. For detailed X-ray data of compounds 4a, 4a′ and 7a, see Supplementary Tables 2–4.

Figure 4. Optimization of domino and one-pot processes.

Figure 4

Open in a new tab

(a) Four-component (ABC2) five-step branched domino reaction. (b,c) Optimization of one-pot two-step synthesis of 2,6-dicyanoaniline derivative 5a (see Supplementary Methods).

We next screened further commercially available bases (Supplementary Fig. 1). A significant improvement of product yields to >99% was observed in presence of hydroquinine 1,4-phthalazinediyl diether ((DHQ)2PHAL, Fig. 4a), well known as a ligand in osmium-catalysed Sharpless dihydroxylation reaction25.

The proposed mechanism of the branched domino reaction was confirmed by ESI- and APPI-MS studies (Fig. 3). In presence of a catalyst, we observed signals at m/z 154 [M]+ and m/z 218 [M+3H]3+, which correspond to products of two transformations running in parallel, Knoevenagel (step 1) and nitro-Michael (step 2) reactions, respectively. A signal at m/z 370 [M+H]+ corresponds to product of a subsequent nitroalkane-Michael reaction (step 3) between previously formed nitroalkane derivative (donor) and a Knoevenagel product (Michael acceptor). The last steps, leading to target compound 4a, involve intramolecular addition (step 4) and tautomerization (step 5).

Next, optimal conditions for 2,6-dicyanoaniline derivative 5a formation (key intermediate for quinazoline synthesis according to Fig. 2) from cyclohexene 4a were studied (see Supplementary Table 1). Notably, 2,6-dicyanoaniline derivatives have recently attracted considerable attention, since they exhibit strong fluorescence in ultraviolet light and may have utility in synthesis of fluorescent materials, non-natural photosynthetic systems, materials with semiconducting or nonlinear optical properties, molecular electronic devices and light-emitting diodes26,27,28,29.

Since direct aromatization of 4a was not successful using different oxidizing agents (see Supplementary Table 1), we assumed that hydrolysis of CN groups to COOH might facilitate the subsequent aromatization step through CO2 release and might also prevent generation of toxic hydrogen cyanide (HCN). Applying acetic acid (AcOH) and carrying out the reaction at 130 °C for 6.5 h, product 4a′ with a quaternary carbon centre was isolated in 75% yield (Fig. 4b). Subsequently, we reacted 4a′ with Ac2O/Py, giving desired product 5a in 95% yield. Next, we turned our attention to finding the optimal conditions for two-step one-pot synthesis of 5a from 4a (Fig. 4c). Carrying out the reaction in presence of AcOH/Py (1:1) at 80 °C for 15 h, desired product 5a was isolated in 41% yield. We obtained, furthermore, performing the same reaction under otherwise identical conditions—but in presence of ammonium acetate (6) as an additive—the product 5a in a higher yield of 52% over two steps (Fig. 4c).

Another specific aim was to combine the five-step branched domino reaction with the optimized two-step linear domino reaction in a seven-step one-pot process, which we successfully realized (Fig. 5a). Noteworthy, all reactions investigated can be effected in 31–67% overall yield over seven steps. Generally, higher yields (61–67% for 5a–5e) were obtained using substrates with both neutral and electron-withdrawing moieties on benzene rings.

Figure 5. One-pot seven-step process and imaging experiments with 5d using combinatorial laser-induced forward transfer (cLIFT) method.

Figure 5

Open in a new tab

(a) Synthesis of new 2,6-dicyanoaniline-based multichromophores via seven-step one-pot sequence. * (1) Catalyst (DHQ)2PHAL (5 mol%), CH2Cl2, RT, 3 h, (2) AcOH/Py=1/1, 1 eq. NH4OAc, 80 °C, 15 h. ** (1) Catalyst (DHQ)2PHAL (20 mol%), CH2Cl2, 0 °C, 6 h, (2) AcOH/Py=1/1, 1 eq. NH4OAc, 80 °C, 15 h (see Supplementary Methods). (b) Fluorescent image of an array (10 × 10 spots) of the selected new fluorophore 5d patterned via cLIFT. Excited at 254 nm, the fluorescence was captured for 10 s at ISO 1,600 with a resolution of 1.25 μm per pixel (scale bar, 1 mm). (c) Imaging of Friedrich-Alexander University logo with the new fluorophore 5d patterned on a glass slide using cLIFT (imaging parameters see b; scale bar, 2 mm), see Supplementary Fig. 2 and Supplementary Note 1. (d) Demonstration of the fluorescence properties of 5d in two different solvents illuminated by ultraviolet light.

Laser-induced fluorescence imaging with 2,6-dicyanoaniline

Using the combinatorial laser-induced forward transfer method30, we patterned selected new fluorophore 5d in the form of an array consisting of 10 × 10 spots (Fig. 5b), and the logo of Friedrich-Alexander University, consisting of single overlapping spots (Fig. 5c). Hereby, laser irradiation (wavelength of 532 nm) transferred the small amounts of 2,6-dicyanoaniline derivative 5d from the donor slide to an acceptor (see Supplementary Fig. 2 and Supplementary Note 1). In accord with the absorption spectrum of compound 5d, an excitation wavelength of 254 nm was chosen. The expected fluorescent image was detected with an optical set-up developed for rapid wide-field screening of chromophores (see Supplementary Fig. 2). The fact that the combinatorial laser-induced forward transfer procedure does not harm push–pull chromophore 5d opens up the possibility to test and optimize optical properties in a high-density array format by performing parallel screenings for different chromophores at the same time. In addition, 5d showed also solvatochromic properties (Fig. 5d).

One-pot 10-step synthesis of fluorescent quinazolines

Consequently, anticipated one-pot synthesis of quinazolines 7a–i was performed via combination of our new seven-step one-pot process with a three-step linear domino reaction using formamide as a suitable reagent in 2 h reaction time (Figs 3 and 6). Reaction of 5a with formamide can proceed through an imine formation (step 1), intramolecular condensation (step 2) and tautomerization (step 3) linear domino process (Fig. 3). We explored the substrate scope of the resulting 10-step one-pot process (Fig. 6). All applied aromatic substrates (carrying either neutral, electron-withdrawing or electron-donating groups) afforded high overall yields of 20–50% over 10 steps. Remarkably, calculated average yields of every individual step in these multistep one-pot reactions, deduced from a total yield of up to 67% (seven-step, Fig. 5a) and up to 50% (10-step, Fig. 6) is 94% and 93%, respectively.

Figure 6. Synthesis and fluorescence properties of quinazolines.

Figure 6

Open in a new tab

Synthesis of new quinazolines via 10-step one-pot process and demonstration of the fluorescence properties of 7h in different solvents illuminated by ultraviolet light. * (1) Catalyst (DHQ)2PHAL (5 mol%), CH2Cl2, RT, 3 h, (2) AcOH/Py=1/1, 1 eq. NH4OAc, 80 °C, 15 h; (3) formamide, reflux, 2 h. ** (1) Catalyst (DHQ)2PHAL (20 mol%), CH2Cl2, 0 °C, 6 h, (2) AcOH, 130 °C, 15 h, (3) formamide, reflux, 2 h. ‡ (1) Catalyst (DHQ)2PHAL (5 mol%), CH2Cl2, RT, 3 h, (2) AcOH, 130 °C, 15 h, (3) formamide, reflux, 2 h. § (1) Pyrrolidine (20 mol%), CH2Cl2, 0 °C, 6 h, (2) AcOH, 130 °C, 15 h, (3) formamide, reflux, 2 h.

Photophysical study of selected fluorescent quinazoline

On example of selected compound 7h we demonstrate the solvatochromy of new quinazolines (Fig. 6). Inspired by this interesting property, we conducted a basic photophysical study of 7h in acetonitrile (see Supplementary Fig. 3, Supplementary Discussion and Supplementary Methods). First insights into the excited-state properties came from steady-state fluorescence measurements. Quinazoline compound 7h exhibits strong fluorescence between 370 and 600 nm, with a maximum at 439 nm. The fluorescence properties of potentially bioactive compounds, for example, antiviral, antimalarial and anticancer agents, might be very useful for an in vitro monitoring of compound-treated cultured cells by use of fluorescence microscopy.

Synthesis of artesunic acid–quinazoline hybrids

Human cytomegalovirus (HCMV) is a major human pathogen showing worldwide prevalence. Prevention and clinical interventions for HCMV disease are limited, since cross-resistance to all approved anti-HCMV drugs is increasingly observed31. As alternatives to standard drugs23,32, our ongoing search for highly active hybrid molecules33,34,35, which exceed their parent compounds in activity against HCMV, resulted in synthesis of new artesunic acid–quinazoline hybrids 8 and 9 (Fig. 7a and Supplementary Methods). We chose compounds 7g and 7h (Fig. 6) as coupling partners, since their fluorescence properties were considered beneficial for biological investigations. Artesunic acid on the other hand was selected because it proved to be a valuable building block in order to get highly bioactive compounds with just a few chemical transformations and also because of its promising pharmacological properties23,32,35.

Figure 7. Microscopy-based visualization of cellular uptake of fluorescent quinazoline compounds.

Figure 7

Open in a new tab

(a) Artesunic acid–quinazoline hybrids 8 and 9. (b–d) Compounds 7h, 7g and 9 were analysed for properties of fluorescence imaging using confocal laser-scanning microscopy. HFFs were cultivated in six-well plates on cover slips and were either directly incubated with compounds by addition to the culture media for 20 h (c) or were added after HCMV infection (b,d; compound addition at 50 h post infection, fixation and analysis of cells 20 h later; scale bar, 10 μm). The chosen concentrations were 10 μM for compounds 7h, 7g and 9, or 1 μM for compound 9 in panels 4, 9 (b), panels 5, 10 (c) and panels 6–10 (d), referring to the compounds' EC50 values of anti-HCMV activity (see Table 1). The depicted images are representative for three independent experiments. Lack of mycoplasm contamination was verified by routine 4,6-diamidino-2-phenylindole staining. General procedures of cell fixation, indirect immunofluorescence staining of proteins (d) and microscopic analysis have been described elsewhere36,37.

Antiviral activities of quinazolines and hybrid compounds

Subsequently, the selected quinazolines 7b, 7g, 7h, 7i and hybrids 8, 9 were quantitatively analysed for their antiviral activity against HCMV (Table 1). The new quinazolines 7b, 7g, 7h and 7i consistently demonstrated a high activity against HCMV, among which the quinazoline heterocycle 7i displayed the most potent antiviral efficacy with a lower in vitro EC50 value than the reference drug ganciclovir (Table 1).

Table 1. EC50 values of anti-HCMV activity (AD169-GFP) determined in primary HFFs.

Compound HCMV EC50 (μM)*,† HFFs CC50 (μM)*,‡
Ganciclovir 2.6±0.5 >100
Artesunic acid 3.8±0.4 82.0±0.9
Artemisinin >10 >100
7b 9.5±4.8 >100
7g 4.9±0.2 >100
7h 4.6±0.9 >100
7i 0.6±0.1 >100
8 0.6±0.1 >100
9 0.1±0.0 >100
Open in a new tab

*The cell culture-based systems for the determination of EC50 and CC50 values (trypan blue exclusion assay) has been previously reported38.

†n=4.

‡n=6 (except artesunic acid: n=3).

Furthermore, our results clearly demonstrate the great potential of the hybridization concept. Artesunic acid–quinazoline hybrids 8 and 9 (EC50 0.6±0.1 and 0.1±0.0 μM, respectively) are not only 6- to 46-fold more active than their parent compounds: artesunic acid, 7g and 7h (EC50 3.8±0.4, 4.9±0.2 and 4.6±0.9 μM, respectively); they also exceed antiviral activity of the reference drug ganciclovir (EC50 2.6±0.5 μM) that is in use for standard treatment of HCMV infections. The measurement of antiviral activity was based on automated fluorometry using a green fluorescent protein (GFP)-expressing, recombinant HCMV (excitation 485 nm, emission 535 nm; see Supplementary Note 2, Supplementary Data 1 and Supplementary Fig. 4 for dose–response curves).

In addition, EC50 values were confirmed using non-GFP-expressing HCMV (strain AD169) by a classical plaque formation assay on HFFs (n=4), providing data consistent with the GFP-based data shown in Table 1, that is, compound 7h, 7.3±0.7 μM; compound 8, 0.3±0.0 μM; compound 9, 0.3±0.1 μM. Moreover, antiviral activity was clearly separated from putative cytotoxic effects because of the results obtained with a standard trypan blue exclusion assay. For all compounds, cytotoxicity for primary HFFs (CC50) was low or undetectable at concentrations up to 100 μM (that is, cytotoxicity values obtained at the highest test concentration of 100 μM remained under the cutoff level for all compounds except artesunic acid also comprising a high CC50 of 82.0±0.9), while anti-HCMV activities (EC50) were in a sub- or single-digit micromolar range. Consistent with these findings are results from a MTS-based cell proliferation assay, showing moderate or no antiproliferative effects on HFFs for all analysed compounds in concentrations up to 30 μM (see Supplementary Fig. 5 and Supplementary Methods). Thus, the new quinazolines and hybrid compounds can be regarded as selective, which is one of the most important aspects in drug design.

Discussion

We describe the operationally simple and expeditious one-pot synthetic method—merging multistep domino reactions under fully metal-free conditions—providing unprecedented convenient access to a new class of antiviral 4,5,7,8-substituted quinazolines, bearing amino and cyano groups at the same time, in high overall yields, starting from simple and readily available compounds (Figs 3 and 6). Only one purification step is involved, leading to significant reduction of costs, waste and labour input. The investigated quinazolines 7b, 7g, 7h, 7i exhibit significant activity against HCMV. Furthermore, selected fluorescent quinazolines 7g, 7h were applied for synthesis of first artesunic acid–quinazoline hybrids 8 and 9, which are, strikingly, also fluorescent and display superior anti-HCMV activity (EC50 down to 0.1±0.0 μM) compared to the parent compounds (artesunic acid and quinazolines) as well as the reference drug ganciclovir (EC50 2.6±0.5 μM).

When analysing primary HFFs, the fluorescent compounds 7g, 7h and 9 could nicely be depicted both in extracellular (transparent arrows) and intracellular localizations (filled arrows; Fig. 7b,c). Interestingly, the extracellular signals included well-ordered crystalline structures (Fig. 7b, panel 8; Fig. 7c, panels 8–9) in the range of the applied concentrations (1–10 μM). The intracellular fluorescence pattern of the compounds showed a speckled accumulation mostly in cytoplasmic areas, thus visually indicating their efficient cellular uptake (Fig. 7b, panels 2–5 and 7–10; Fig. 7c, panels 3–5 and 8–10). A nonfluorescent artemisinin-derived control compound (Fig. 7c, panels 2 and 7; see also Supplementary Fig. 6), the DMSO panels (solvent controls) as well as the inspection of different excitation wavelengths of the confocal laser-scanning microscopy confirmed the specificity of signals and a lack of unwarranted cross-fluorescence. Of note, the fluorescent capacity of compounds 7h, 7g and 9 (depicted by microscopic imaging scored at a laser wavelength of 405 nm; Fig. 7b–d) did not interfere with GFP fluorometry, so that control measurements with these compounds did not produce signals above background levels. Importantly, the evaluation of virus-infected cells could also be included in this analytic approach, opening new perspectives in the investigation of antiviral activity and mechanistic details of the compounds (the latter point might be supported by the study of intracellular drug–target binding and localization in future applications). An indirect immunofluorescence counterstaining of viral and cellular proteins36,37 led to the detection of nuclear markers, that is, the viral protein kinase pUL97 and cellular lamins type A/C (Fig. 7d, panels 4, 9, 14 or 5, 10, 15, respectively), in the context of extracellular and intracellular fluorescence signals of compounds 7h and 9 (Fig. 7d, panels 1–5 or 6–15, respectively). The direct co-staining of putative target proteins of the compounds seems to be a further realistic goal and might be realizable at a later stage.

The fact that the studied antiviral quinazoline compounds are fluorescent opens up a new vista of molecular imaging in drug development and mechanistic studies, avoiding the requirement of linkage of external fluorescent markers to quinazoline drugs. Through fluorescence these new compounds might then be analysed for details of putative biological activities, such as in vitro inhibitory properties against HCMV as demonstrated in the present study and also for the aspects of drug delivery in single cells and whole tissue.

In general, these unprecedented findings have important future implications for the development of efficient drugs (for example, antiviral, anticancer and antimalarial) for clinics based on fluorescent bioactive heterocycles as lead compounds.

Methods

General methods

For details of the reaction optimization procedures and product characterizations, see Supplementary Fig. 1, Supplementary Table 1 and Supplementary Methods. For X-ray data of compounds 4a, 4a′ and 7a, see Supplementary Tables 2–4. For fluorescent imaging with 5d, see Supplementary Fig. 2 and Supplementary Note 1. For photophysical studies of compound 7h, see Supplementary Fig. 3, Supplementary Methods and Supplementary Discussion. For antiviral studies of selected compounds in this manuscript, see Supplementary Figs 4 and 5, Supplementary Methods and Supplementary Note 2. For 1H, 13C NMR spectra of the compounds in this article, see Supplementary Figs 6–52.

Data availability

CCDC 1472467 (4a), 1472469 (4a′) and 1472470 (7a) contain the supplementary crystallographic data for this paper. These data are provided free of charge by The Cambridge Crystallographic Data Centre. The authors declare that all other data supporting the findings of this study are available within the article and its Supplementary Information file.

Additional information

How to cite this article: Held, F. E. et al. Facile access to potent antiviral quinazoline heterocycles with fluorescence properties via merging metal-free domino reactions. Nat. Commun. 8, 15071 doi: 10.1038/ncomms15071 (2017).

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary Material

Supplementary Information

Supplementary figures, supplementary tables, supplementary notes, supplementary discussion, supplementary methods and supplementary references.

ncomms15071-s1.pdf (3.8MB, pdf)
Supplementary Data 1

Excel sheet with EC50 data.

ncomms15071-s2.xlsx (65.2KB, xlsx)

Acknowledgments

We gratefully acknowledge the financial support from Deutsche Forschungsgemeinschaft (DFG) by grants TS 87/17-1 (SPP 1807, Priority Programme ‘Control of London Dispersion Interactions in Molecular Chemistry'), TS 87/15-1, TS 87/16-3 and MM 1289/7-1/7-3. We also thank the Graduate School Molecular Science (GSMS), Interdisciplinary Center for Molecular Materials (ICMM), the Wilhelm Sander-Stiftung (Grants Nr. 2014.019.1 and 2011.085.1-2), BMBF (Grant Nr. 031A095C) and Emerging Fields Initiative (EFI) ‘Chemistry in Live Cells' supported by Friedrich-Alexander-Universität Erlangen-Nürnberg for research funding.

Footnotes

The authors declare no competing financial interests.

Author contributions F.E.H. and A.A.G. conducted the domino reactions and one-pot multistep transformations. F.E.H. contributed to the development and evaluation of the scope of 2,6-dicyano-anilines and quinazolines synthesis. A.A.G. contributed to the scope of 2,6-dicyano-anilines synthesis. T.F. performed the synthesis of artesunic acid–quinazoline hybrid molecules. F.H. conducted the X-ray analysis. A.K. performed the photophysical measurements. H.B. and C.H. performed antiviral tests and cytotoxicity studies. M.S. performed confocal microscopy analyses. M.M. and C.H. supervised the biological investigations of new quinazoline molecules, evaluated data and included the relevant sections into the manuscript. C.v.B.-K., D.S.M., T.F. conducted and A.N.-M. supervised the laser-induced imaging with selected new fluorophore. S.B.T. conceived and directed the research, supervised the synthetic experiments and wrote the manuscript; all authors discussed the results and commented on the manuscript.

References

  1. Alafeefy A. M., Kadi A. A., Al-Deeb O. A., El-Tahir K. E. & Al-Jaber N. A. Synthesis, analgesic and anti-inflammatory evaluation of some novel quinazoline derivatives. Eur. J. Med. Chem. 45, 4947–4952 (2010). [DOI] [PubMed] [Google Scholar]
  2. Hutterer C. et al. The chemical class of quinazoline compounds provides a core structure for the design of anticytomegaloviral kinase inhibitors. Antiviral Res. 134, 130–143 (2016). [DOI] [PubMed] [Google Scholar]
  3. Madapa S. et al. Search for new pharmacophores for antimalarial activity. Part II: synthesis and antimalarial activity of new 6-ureido-4-anilinoquinazolines. Bioorg. Med. Chem. 17, 222–234 (2009). [DOI] [PubMed] [Google Scholar]
  4. Zhang Y. et al. Synthesis and anticancer activities of 5,6,7-trimethoxy-N-phenyl(ethyl)-4-aminoquinazoline derivatives. Eur. J. Med. Chem. 66, 335–344 (2013). [DOI] [PubMed] [Google Scholar]
  5. Erba E., Pocar D. & Valle M. ν-Triazolines. Part 41.1 A new synthesis of 2-alkylquinazolines and 2,9-dialkylpyrimido[4,5-b] indoles. J.Chem. Soc. Perkin Trans. 1, 421–426 (1999). [Google Scholar]
  6. Bedi P. M., Kumar V. & Mahajan M. P. Synthesis and biological activity of novel antibacterial quinazolines. Bioorg. Med. Chem. Lett. 14, 5211–5213 (2004). [DOI] [PubMed] [Google Scholar]
  7. Zhang Z.-H., Zhang X.-N., Mo L.-P., Li Y.-X. & Ma F.-P. Catalyst-free synthesis of quinazoline derivatives using low melting sugar–urea–salt mixture as a solvent. Green Chem. 14, 1502 (2012). [Google Scholar]
  8. Karnakar K., Kumar A. V., Murthy S. N., Ramesh K. & Nageswar Y. V. D. Recyclable graphite oxide promoted efficient synthesis of 2-phenyl quinazoline derivatives in the presence of TBHP as an oxidant. Tetrahedron Lett. 53, 4613–4617 (2012). [Google Scholar]
  9. Du Z. & Shao Z. Combining transition metal catalysis and organocatalysis—an update. Chem. Soc. Rev. 42, 1337–1378 (2013). [DOI] [PubMed] [Google Scholar]
  10. Deiana L. et al. Highly enantioselective cascade transformations by merging heterogeneous transition metal catalysis with asymmetric aminocatalysis. Sci. Rep. 2, 851 (2012). [DOI] [PMC free article] [PubMed] [Google Scholar]
  11. Loh C. C., Badorrek J., Raabe G. & Enders D. Merging organocatalysis and gold catalysis: enantioselective synthesis of tetracyclic indole derivatives through a sequential double Friedel-Crafts type reaction. Chem. Eur. J. 17, 13409–13414 (2011). [DOI] [PubMed] [Google Scholar]
  12. Loh C. C. & Enders D. Merging organocatalysis and gold catalysis—a critical evaluation of the underlying concepts. Chem. Eur. J. 18, 10212–10225 (2012). [DOI] [PubMed] [Google Scholar]
  13. Hack D. et al. Combining silver catalysis and organocatalysis: a sequential Michael addition/hydroalkoxylation one-pot approach to annulated coumarins. Org. Lett. 16, 5188–5191 (2014). [DOI] [PMC free article] [PubMed] [Google Scholar]
  14. Tejedor D., Mendez-Abt G., Cotos L. & Garcia-Tellado F. Merging domino and redox chemistry: stereoselective access to di- and trisubstituted β,γ-unsaturated acids and esters. Chem. Eur. J. 18, 3468–3472 (2012). [DOI] [PubMed] [Google Scholar]
  15. Nicewicz D. A. & MacMillan D. W. Merging photoredox catalysis with organocatalysis: the direct asymmetric alkylation of aldehydes. Science 322, 77–80 (2008). [DOI] [PMC free article] [PubMed] [Google Scholar]
  16. Tietze L. F. Domino reactions in organic synthesis. Chem. Rev. 96, 115–136 (1996). [DOI] [PubMed] [Google Scholar]
  17. Enders D., Huttl M. R., Grondal C. & Raabe G. Control of four stereocentres in a triple cascade organocatalytic reaction. Nature 441, 861–863 (2006). [DOI] [PubMed] [Google Scholar]
  18. Enders D., Grondal C. & Huttl M. R. Asymmetric organocatalytic domino reactions. Angew. Chem. Int. Ed. 46, 1570–1581 (2007). [DOI] [PubMed] [Google Scholar]
  19. Grondal C., Jeanty M. & Enders D. Organocatalytic cascade reactions as a new tool in total synthesis. Nat. Chem. 2, 167–178 (2010). [DOI] [PubMed] [Google Scholar]
  20. Albrecht L., Jiang H. & Jorgensen K. A. A simple recipe for sophisticated cocktails: organocatalytic one-pot reactions—concept, nomenclature, and future perspectives. Angew. Chem. Int. Ed. 50, 8492–8509 (2011). [DOI] [PubMed] [Google Scholar]
  21. Zeng X., Ni Q., Raabe G. & Enders D. A branched domino reaction: asymmetric organocatalytic two-component four-step synthesis of polyfunctionalized cyclohexene derivatives. Angew. Chem. Int. Ed. 52, 2977–2980 (2013). [DOI] [PubMed] [Google Scholar]
  22. Tietze L. F. Domino Reactions: Concepts for Efficient Organic Synthesis Wiley-VCH (2014). [Google Scholar]
  23. Reiter C. et al. Highly potent artemisinin-derived dimers and trimers: synthesis and evaluation of their antimalarial, antileukemia and antiviral activities. Bioorg. Med. Chem. 23, 5452–5458 (2015). [DOI] [PubMed] [Google Scholar]
  24. Bock C. M. et al. Generation of complex azabicycles and carbobicycles from two simple compounds in a single operation through a metal-free six-step domino reaction. Chem. Eur. J. 22, 5189–5197 (2016). [DOI] [PubMed] [Google Scholar]
  25. Dupau P., Epple R., Thomas A. A., Fokin V. V. & Sharpless K. B. Osmium-catalyzed dihydroxylation of olefins in acidic media: old process, new tricks. Adv. Synth. Catal. 344, 421–433 (2002). [Google Scholar]
  26. Kanis D. R., Ratner M. A. & Marks T. J. Design and construction of molecular assemblies with large second-order optical nonlinearities. Quantum chemical aspects. Chem. Rev. 94, 195–242 (1994). [Google Scholar]
  27. Bendikov M., Wudl F. & Perepichka D. F. Tetrathiafulvalenes, oligoacenenes, and their buckminsterfullerene derivatives: the brick and mortar of organic electronics. Chem. Rev. 104, 4891–4946 (2004). [DOI] [PubMed] [Google Scholar]
  28. Kulkarni A. P., Kong X. & Jenekhe S. A. High-performance organic light-emitting diodes based on intramolecular charge-transfer emission from donor–acceptor molecules: significance of electron-donor strength and molecular geometry. Adv. Funct. Mater. 16, 1057–1066 (2006). [Google Scholar]
  29. Das P., Butcher R. J. & Mukhopadhyay C. Zinc titanate nanopowder: an advanced nanotechnology based recyclable heterogeneous catalyst for the one-pot selective synthesis of self-aggregated low-molecular mass acceptor–donor–acceptor–acceptor systems and acceptor–donor–acceptor triads. Green Chem. 14, 1376 (2012). [Google Scholar]
  30. Loeffler F. F. et al. High-flexibility combinatorial peptide synthesis with laser-based transfer of monomers in solid matrix material. Nat. Commun. 7, 11844 (2016). [DOI] [PMC free article] [PubMed] [Google Scholar]
  31. Lurain N. S. & Chou S. Antiviral drug resistance of human cytomegalovirus. Clin. Microbiol. Rev. 23, 689–712 (2010). [DOI] [PMC free article] [PubMed] [Google Scholar]
  32. Reiter C. et al. New efficient artemisinin derived agents against human leukemia cells, human cytomegalovirus and Plasmodium falciparum: 2nd generation 1,2,4-trioxane-ferrocene hybrids. Eur. J. Med. Chem. 97, 164–172 (2015). [DOI] [PubMed] [Google Scholar]
  33. Tietze L. F., Bell H. P. & Chandrasekhar S. Natural product hybrids as new leads for drug discovery. Angew. Chem. Int. Ed. 42, 3996–4028 (2003). [DOI] [PubMed] [Google Scholar]
  34. Tsogoeva S. B. Recent progress in the development of synthetic hybrids of natural or unnatural bioactive compounds for medicinal chemistry. Mini-Rev. Med. Chem. 10, 773–793 (2010). [DOI] [PubMed] [Google Scholar]
  35. Fröhlich T., Capci Karagöz A., Reiter C. & Tsogoeva S. B. Artemisinin-derived dimers: potent antimalarial and anticancer agents. J. Med. Chem. 59, 7360–7388 (2016). [DOI] [PubMed] [Google Scholar]
  36. Steingruber M. et al. The interaction between cyclin B1 and cytomegalovirus protein kinase pUL97 is determined by an qctive kinase domain. Viruses 7, 4582–4601 (2015). [DOI] [PMC free article] [PubMed] [Google Scholar]
  37. Milbradt J. et al. The prolyl isomerase Pin1 promotes the herpesvirus-induced phosphorylation-dependent disassembly of the nuclear lamina required for nucleocytoplasmic egress. PLoS Pathog. 12, e1005825 (2016). [DOI] [PMC free article] [PubMed] [Google Scholar]
  38. Hutterer C. et al. A novel CDK7 inhibitor of the Pyrazolotriazine class exerts broad-spectrum antiviral activity at nanomolar concentrations. Antimicrob. Agents Chemother. 59, 2062–2071 (2015). [DOI] [PMC free article] [PubMed] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

Supplementary Information

Supplementary figures, supplementary tables, supplementary notes, supplementary discussion, supplementary methods and supplementary references.

ncomms15071-s1.pdf (3.8MB, pdf)
Supplementary Data 1

Excel sheet with EC50 data.

ncomms15071-s2.xlsx (65.2KB, xlsx)

Data Availability Statement

CCDC 1472467 (4a), 1472469 (4a′) and 1472470 (7a) contain the supplementary crystallographic data for this paper. These data are provided free of charge by The Cambridge Crystallographic Data Centre. The authors declare that all other data supporting the findings of this study are available within the article and its Supplementary Information file.

Articles from Nature Communications are provided here courtesy of Nature Publishing Group

RESOURCES