Skip to main content
PMC home page
Scientific Data logoLink to Scientific Data
. 2017 Jul 25;4:170095. doi: 10.1038/sdata.2017.95

A comprehensive data set of lake surface water temperature over the Tibetan Plateau derived from MODIS LST products 2001–2015

Wei Wan 1,2, Huan Li 1,2, Hongjie Xie 3,a, Yang Hong 1,2,4,b, Di Long 1,2, Limin Zhao 5,6, Zhongying Han 1,2, Yaokui Cui 1,2, Baojian Liu 7, Cunguang Wang 1,2, Wenting Yang 1,2
PMCID: PMC5525638  PMID: 28742066

Abstract

Lake surface water temperature (LSWT) is sensitive to long-term changes in thermal structure of lakes and regional air temperature. In the context of global climate change, recent studies showed a significant warming trend of LSWT based on investigating 291 lakes (71% are large lakes, ≥50 km2 each) globally. However, further efforts are needed to examine variation in LSWT at finer regional spatial and temporal scales. The Tibetan Plateau (TP), known as ‘the Roof of the World’ and ‘Asia’s water towers’, exerts large influences on and is sensitive to regional and even global climates. Aiming to examine detailed changing patterns and potential driven mechanisms for temperature variations of lakes across the TP region, this paper presents the first comprehensive data set of 15-year (2001–2015) nighttime and daytime LSWT for 374 lakes (≥10 km2 each), using MODIS (Moderate Resolution Imaging Spectroradiometer) Land Surface Temperature (LST) products as well as four lake boundary shapefiles (i.e., 2002, 2005, 2009, and 2014) derived from Landsat/CBERS/GaoFen-1 satellite images. The data set itself reveals significant information on LSWT and its changes over the TP and is an indispensable variable for numerous applications related to climate change, water budget analysis (particularly lake evaporation), water storage changes, glacier melting and permafrost degradation, etc.

Subject terms: Hydrology, Climate change, Limnology

Background & Summary

Lakes, particularly alpine lakes, act as sentinels by producing and storing signals that reflect the influence of climate change on terrestrial and aquatic ecosystems1. Changes in lakes reflect the changes of physical, chemical and biological processes in the surrounding catchment due to climate forcing2. Lake surface water temperature (LSWT), as being directly related to and sensitive to long-term changes in thermal structure of lakes and regional climate, is an important indicator to understand changes in lake state2,3 as well as surrounding basins and regional climate change. Recent studies on large lakes globally showed an overall marked warming trend that is clearly a response to the current warming climate4,5, whilst several studies on regional scale showed various degrees of responses 6,7,8.

The Tibetan Plateau (TP), a vast highland area in Central Asia, also known as ‘the Roof of the World’ and ‘Asia’s water towers’9, exerts a large influence on and is sensitive to regional and global climate through thermal and mechanical forcing mechanisms10. The TP consists of more than 1,100 large alpine lakes (>1 km2 each), with the total area exceeding 46,527 km2 (ref. 11). Recent studies have examined the status and change in lake area12,13, water level14,15, and water volume16,17 across the TP. The status and change in LSWT, however, still remain unclear, although the LSWT of over 50 large lakes has been previously reported8,18.

There are several different global-scale lake temperature data products which are publically accessible, e.g., the data set of ATSR Reprocessing for Climate: LSWT & Ice Cover (ARC-Lake, http://www.laketemp.net/, version 3 from 1995–2012 was released in year 2014)19, and the data set of lake temperature (1985–2009) created by the Global Lake Temperature Collaboration (GLTC, www.laketemperature.org) in 2015 (ref. 20). There are only a few regional-scale LSWT products that are publically available, e.g., the LSWT products for European Alpine lakes (1989–2013) using Advanced Very High Resolution Radiometer (AVHRR) data21. Furthermore, except for ARC-Lake, the above-mentioned existing data sets only included nighttime temperatures. This is insufficient to represent large diurnal variations experienced in some lakes, particularly large in small systems22,23. To date, there is no comprehensive data set on LSWT across the TP, especially no open-access data sets derived from satellite image; even the ARC-Lake and GLTC include only large lakes (i.e., ≥ 50 km2 each) within the TP region. In this paper, we present the first 15-year (2001–2015) comprehensive data set of nighttime and daytime LSWT from 374 lakes with areas greater than 10 km2 each (Figure 1). We used MODIS (Moderate Resolution Imaging Spectroradiometer) Land Surface Temperature (LST) 8-day composite products (MOD11A2, level 3), as well as four lake boundary files in ArcGIS format (i.e., 2002, 2005, 2009, and 2014) derived from Landsat/CBERS/GaoFen-1 satellite images, as the main data sources. The flowchart for producing and validating this data set is shown in Figure 2. This newly generated data set could be valuable in addressing scientific questions associated with regional climate change, water budget analysis (particularly lake evaporation), surface water storage changes, glacier melting and permafrost degradation, etc.

Figure 1. Map of lakes included in the generated data set.

Figure 1

Open in a new tab

The boundary of the TP is defined as above the elevation of 2,500 m using NASA Shuttle Radar Topographic Mission (SRTM) 90 m Digital Elevation Models (DEM) Database v4.111. (GLTC: Global Lake Temperature Collaboration).

Figure 2.

Figure 2

Open in a new tab

Methods

MODIS LST product pre-processing

MODIS/Terra LST level 3, 8-day average, per-pixel data of 1-km nominal spatial resolution (MOD11A2, version 6) were obtained from NASA’s Earth Observing System Data and Information System (EOSDIS, https://earthdata.nasa.gov). MOD11A2 is the averaged LSTs of daily MOD11A1 products over 8 days, including 46 8-day samples per year. Zhang et al.8 showed a comprehensive explanation of the reliability of choosing MOD11A2 as a basic MODIS data source in addition to others (e.g., MYD11A2). Day- and night-time LST layers (overpass time ~10.30 am and ~10.30 pm of local time, respectively) were extracted from MOD11A2. The LST tiles were resampled to a 1-km pixel size and reprojected onto a Geographic (GEO) projection using the MODIS Reprojection Tool (https://lpdaac.usgs.gov/tools/modis_reprojection_tool) from the original sinusoidal projection. The original tiles were then mosaicked and converted to a GeoTIFF format. Cloud-contaminated pixels in the raw MOD11A2 data were replaced with Nulls.

Lake boundary data processing

A previous study presented lake boundary data sets of the TP region for the 1960s, 2005, and 2014 (ref. 11). To match the time period of the Ice, Clouds, and Land Elevation Satellite (ICESat) and CryoSat-2 for monitoring lake level changes14,15, in this study, we further produced two more lake boundaries (i.e., 2002 and 2009) for lakes with area greater than 10 km2, using Landsat TM and ETM+ images and following the same procedure described in Wan et al.11. Considering the time periods of MODIS data in this study (i.e., 2001–2015), lake boundary shapefiles for 2002, 2005, 2009 and 2014 were used together as references for LSWT extraction. To reduce potential errors due to the fluctuation of land-water interfaces or the inconsistency of year-by-year water boundaries attributed to the geometric distortion of the GaoFen-1 images, and to reserve as many lakes as possible for LSWT extraction, a 1-km buffer zone offshore for lakes with area ≥ 30 km2 and a 0.5-km buffer zone offshore for lakes with area 10–30 km2 were generated, to exclude pixels along shorelines. Overlapped lakes appearing in all the four buffer shapefiles were selected and saved. Following the above steps, we finally obtained four lake buffer shapefiles, corresponding to the four lake boundary shapefiles, for a total of 374 lakes. The four buffer shapefiles were then used as base files (masks) for LSWT extraction from the MOD11A2 files.

LSWT deriving

A stepwise processing method was used to derive the final LSWT products and is described in detail as follows:

1) Zonal statistics

Lakes over the TP were either expanding or shrinking over the past few decades24,25,26,27 . In order to ensure accurate lake boundaries, for a specific year, we used the buffer boundary shapefile of lakes that was temporally close to the pre-processed MODIS LST data to represent the buffer zone of lakes. As shown in Figure 2, the 2002, 2005, 2009, and 2014 buffer shapefiles were used for masking the 2001–2003, 2004–2007, 2008–2011, and 2012–2015 MODIS data, respectively. For each year, the mean and standard deviation (STD) values of each lake were summarized within the zone of each buffer shape of the lake.

2) Post-processing

The majority of the lakes met the above-mentioned rules of zonal statistics. However, there were some lakes whose buffer areas were smaller than one pixel of the MODIS LST data; as a result, these lakes received no mean and STD values of temperature. To resolve this problem, we created a feature class containing points generated from the representative locations of those small buffers. This point-layer was then used to execute the zonal statistics to obtain temperature values for these lakes. After combining the above two statistics for means and STDs together, we converted the raw pixel values of the mean LST into degrees Celsius (°C) using a simple equation P×0.02–273.15, where p denotes the mean LST value of each lake. For a cloudy day with Null values for some lakes, the values were filled through interpolations using the temperature values before and after the present day (i.e., 8-day since it is the 8-day product).

3) Filtering

For the filled data in 2), due to the limitations of methods for removing cloudy data in the MODIS LST products28, there were still cloud-contaminated outliers in the data set, particularly for the nighttime data in summer. Previous studies applied different approaches to take into account this issue, such as using air temperature as a reference8, the MODIS quality control data sets (QC SDS)29, and filtering18. Here, we tested the effectiveness of several filters for both nighttime and daytime data and eventually chose two types of filters, i.e., the Percentile Filter and the Lowess Filter30. Figure 3 shows the performance of the two filtering methods on nighttime (a) and daytime (b) time series for two typical lakes: one is Yake Co (34.70°N, 87.19°E, NAME_ID=334) with the highest annual increasing rate (0.472±0.079 °C/year) for nighttime LSWT, and the other is Xiaokusai Lake (36.08°N, 92.80°E, NAME_ID=316) with the highest annual decreasing rate (−0.594±0.099 °C/year) for daytime LSWT. Note that for nighttime data, the Percentile Filter performed better than the Lowess Filter since it can smooth summer outliers in a more effective way. For daytime data, the Lowess Filter performed better since it can reserve more details while smoothing. For Percentile Filter, a fixed span value (i.e., span=5) was used for all data series, whilst for Lowess Filter, the fixed value was span=8.

Figure 3. Performances of the two filtering methods.

Figure 3

Open in a new tab

(a) Yake Co (34.70°N, 87.19°E) for nighttime time series; (b) Xiaokusai Lake (36.08°N, 92.80°E) for daytime time series. Black lines denote the raw LSWT data with Nulls being filled for the period 2001–2015; Red solid lines and blue dash lines denote the Lowess Filter and Percentile Filter, respectively.

Data Records

The overall information for the 374 investigated lakes is shown in the ‘LAKE_INFO.csv’ file, i.e., name, latitude/longitude, basin being located in, etc. The basins in which the lakes are located are numbered in alphabetical order: 1-AmuDarya, 2-Brahmaputra, 3-Hexi, 4-Indus, 5-Inner TP, 6-Qaidam, 7-Salween, 8-Tarim, 9-Yangtze, and 10-Yellow (Two basins, i.e., Ganges and Mekong, with no target lakes in them, are numbered with −999.). The Inner TP basin was subdivided into 6 small basins ranging from 51-InnerA to 56-InnerF. The data set is available in three folders. The ‘nighttime’ and ‘daytime’ folders, organized in the same way, contains four subfolders, ‘raw’, ‘filled’, ‘filter’, and ‘annual_monthly_mean’, respectively. Data organization and description are presented in Table 1. All the files containing the actual values can be linked to each other via the NAME_ID column. The 2005 and 2014 lake boundary data in the ‘shapefile’ folder used in this study were published in Wan et al.11. The 2002 and 2009 lake boundary data as well as all the LSWT data are first published here. The data set can be accessed at (Data Citation 1).

Table 1. Data organizations and descriptions for the generated data set.

Folder Subfolder File name Data label Description
shapefile boundary_shp   ESRI shapefiles for boundaries of the TP region as well as the 12 great basins and 6 subbasins inside the great basin Inner TP; The Basin_IDs are generally consistent with those in the following ‘lake_shp’ and ‘buffer_shp’ shapefiles, except that there are two basins (i.e., Ganges and Mekong) with no target lakes in them are labelled with −999.
  lake_shp Lake data set for the TP region from 2002, 2005, 2009, and 2014, in ESRI shapefile format ID Lake code in the industry standard36
      SHAPE Feature type of the lake object
      NAME_CH Chinese name of the lake
      NAME_EN English name of the lake
      LAT_NORTH North latitude of the geometric centre of the lake polygon in decimal degree
      LONG_EAST East longitude of the geometric centre of the lake polygon in decimal degree
      PERIMETER Perimeter of the lake polygon in kilometre
      WATER_S Area of the lake’s water surface in square kilometre
      BASIN The name of the basin where the lake is located in
      BUFF_DIST Buffer distance offshore for the lake. −1 indicates 1 km and −0.5 indicates 0.5 km
      NAME_ID Digital IDs for the 374 lakes. The same meaning for all the files in the new data set
      BASIN_ID Digital IDs for the basins used in the new data set
  buffer_shp   Buffer shapefiles for the 2002, 2005, 2009, and 2014 lake data set in the 'lake_shp' folder, in ESRI shapefile format. Data labels and descriptions could be refered to the ‘lake_shp’ shapefiles.
      nighttime
 LSWT_N_raw.txt MEAN_001~MEAN_361  N1: Raw LSWT(°C) derived from nighttime MODIS 8-day LST products (MOD11A2)
    LSWT_N_filled.txt    N2: Raw LSWT(°C) with Nulls in N1 being filled    
    LSWT_N_filter.txt    N3: Filtered LSWT(°C) in N2 using Percentile Filter    
    LSWT_N_monthly_mean.txt MEAN_001~MEAN_012 Nighttime monthly mean LSWT(°C) from Jan. to Dec.    
    LSWT_N_annual_mean.txt MEAN_2001~MEAN_2015 Nighttime annual mean LSWT(°C)    
      RATE Nighttime annual change rate    
      SE Standard error for nighttime change rate    
      daytime
 LSWT_D_raw.txt MEAN_001~MEAN_361  D1: Raw LSWT(°C) derived from daytime MODIS 8-day LST products (MOD11A2)
    LSWT_D_filled.txt    D2: Raw LSWT(°C) with Nulls in D1 being filled    
    LSWT_D_filter.txt    D3: Filtered LSWT(°C) in D2 using Percentile Filter    
    LSWT_D_monthly_mean.txt MEAN_001~MEAN_012 Daytime monthly mean LSWT(°C) from Jan. to Dec.    
    LSWT_D_annual_mean.txt MEAN_2001~MEAN_2015 Daytime annual mean LSWT(°C)    
      RATE Daytime annual change rate    
      SE Standard error for daytime change rate    
      figures
 yyyy_N_filter.png Plots of the filtered nighttime LSWT(°C) for the 374 lakes
    yyyy_D_filter.png Plots of the filtered daytime LSWT(°C) for the 374 lakes
    
    yyyy_N_monthly_mean.png Plots of the nighttime monthly mean LSWT(°C) for the 374 lakes
    
    yyyy_D_monthly_mean.png Plots of the daytime monthly mean LSWT(°C) for the 374 lakes    
Open in a new tab

For each lake in the new data set, the annual rate of change in temperature was derived using annual mean LSWT(°C) regressed against data acquisition year using the regression model described in Zhang et al.8. The monthly mean LSWT (°C) was calculated by averaging the 8-day samples whose DOYs were exactly within the range of a specific month. An overall monthly statistic for the variation in change percentage and rate of lakes in this data set is shown in Fig. 4. Figure 4 (a1) show positive or negative change percentages of the LSWT, for nighttime and daytime, respectively. Note that the percentages of positive lakes in September (72%, 76%), October (83%, 68%), and November (82%, 68%) are high for both nighttime and daytime. January for nighttime data also shows a high percentage (71%) for positive lakes. For daytime data, >85% lakes show decreasing rate from January to April. Figure 4 (a2) show change rates of LSWT for all lakes, positive lakes and negative lakes, in nighttime and daytime, respectively. Note that the change rates show two peaks for both positive and negative lakes in nighttime, whereas in daytime, there is only one peak at around June for positive lakes and April for negative lakes.

Figure 4. Monthly statistics for the lake surface water temperature (LSWT) changes from this data set (2001–2015):

Figure 4

Open in a new tab

Change percentage (a1,b1) and rate (a2,b2) of positive lakes (red), negative lakes (blue), and all lakes (black), in nighttime (a1,a2) and daytime (b1,b2), respectively.

Technical Validation

Quality control and assurance of the data set

We executed quality control for producing both the lake/buffer boundary data and the LSWT data. To produce the 2002 and 2009 lake boundary shapefiles, consistent rules for producing the previous data set published in Wan et al.11 were used by the same group and through the same techniques. The shapefiles for the lake and buffer boundaries were overlaid and examined in ESRI ArcGIS software carefully to ensure the consistency of the geographic locations and the shape. For each lake, Lake name and ID were examined to avoid any mismatching problem. To reduce erroneous values, the initial results were cross-checked lake by lake by three co-authors of this paper (Wei Wan, Huan Li, and Zhongying Han) to ensure that there were no erroneous lakes.

Each step was strictly controlled for producing the LSWT data set. After the assembly of the data set was completed, for the raw, filled, and filtered data sets, we examined the distribution of lake temperatures and the monthly mean values using a series of plots. These plots allowed us to identify outliers and unusual trends. Attention was paid to examine those lakes with abnormal temperature variations to ensure that we extracted LST values from the water surface rather than the land surface or mixed water and land surfaces. We also compared the distributions and trends of the change rates using maps and data from previous publications. Primary conclusions are shown in the final section of this paper.

Preliminary and interesting discoveries are found from the data set, e.g., for daytime data, in Gansenquan Lake (37.46°N, 92.77°E, NAME_ID=105) in Qaidam basin, a very high temperature in summer was observed (monthly mean exceeding 40 °C for June, July, and August). This was consistent with the maximum air temperature in this basin which can reach a high range of 40 °C −55 °C31. Another phenomenon was that the majority of lakes in the Brahmaputra basin exhibited abnormal seasonal cycles, in particular, Chumba Yumco (28.23°N, 89.64°E, NAME_ID=59) and Nariyong Co (28.30°N, 91.95°E, NAME_ID=203). Driving mechanisms contributing to this phenomenon should be further investigated.

Comparisons with other data sets and in situ measurements

After validating the accuracy of the extraction process for the developed data set, we further compared our data set to the two global data sets, i.e., the GLTC and ARC-Lake20. The GLTC data set assembled a global database of summer lake temperatures for 291 lakes collected in situ and/or by satellites for the period 1985–2009. There were eight lakes in both the GLTC data set and the new data set presented here that have data in the overlap period of 2001–2009 (Figure 1). These eight lakes are Ayakkum Lake (37.55°N, 89.42°E), Gyaring Lake (34.93°N, 97.26°E), Har Lake (38.29°N, 97.59°E), Nam Co (30.74°N, 90.60°E), Ngoring Lake (34.90°N, 97.70°E), Qinghai Lake (36.88°N, 100.20°E), Selin Co (31.80°N, 88.99°E), and Zhari Namco (30.93°N, 85.62°E). The surface temperatures of the eight lakes from the GLTC data set were collected by satellite data from either the Advanced Very High Resolution Radiometer (AVHRR) or the Along Track Scanning Radiometer (ATSR-1, ATSR-2, AATSR). The summer mean temperatures were calculated for a 3-month period from 1 July to 30 September. The final temperature presented in the GLTC data set was the bulk water temperatures calculated using satellite-derived surface temperature and sensor specific correction factors described in Sharma et al.20. The correlations between the two data sets for the eight lakes are shown in Figure 5(a). Note that the two data sets show pretty high agreement (R=0.97) with an average bias of ~2.5 °C, with GLTC values higher than MODIS values. The bias could be attributed to two factors, i.e., one is the systematic deviation between the surface temperature (MODIS) and bulk temperature (GLTC) (i.e., surface temperature is~0.46 °C smaller than the bulk temperature as reported in Hook et al.32), and the other is the systematic deviation between the different satellite sensors.

Figure 5. Correlations between the generated data set in this study and the other two data sets for eight same lakes during the corresponding overlap periods.

Figure 5

Open in a new tab

(a) the GLCT; (b1) the Nighttime data set of the ARC-Lake, and (b2) the Daytime data set of the ARC-Lake.

The ARC-Lake data set (version 3) included ATSR-2/AATSR-based lake surface temperatures for globally-distributed 1,628 target water bodies. The LSWTs of the above-mentioned eight lakes were used to compare between the ARC-Lake data set and the data set generated in this study. The two data sets used different strategies to deal with the LSWTs in frozen periods, i.e., the ARC-Lake substituted the frozen LSWTs with 0 °C based on climatologic approach, whilst the data set in this study used the original ice surface temperatures from MODIS. Therefore, only LSWTs higher than 5 °C were used for comparison (the additional 5 °C was to eliminate deviations generated from the climatologic algorithms). Figure 5(b1 show correlations between the monthly mean LSWTs of the two data sets for nighttime and daytime, for the overlap period from Jan. 2001-Mar. 2012, respectively. Note that the two data sets show pretty high agreements (R=0.96 for both), with an average bias of ~2.2 °C for nighttime data, however. Since both of the two data sets measured the lake surface temperatures by satellites, the bias from nighttime could be attributed to the systematic deviation between the different satellite sensors.

Satellite measurements of the LWSTs are biased due to characteristics such as weather-dependent, instantaneity in time, and methodology-dependent. It is crucial that the satellite data be validated against in situ data. The absolute differences between MODIS LST products and in situ measurements have been reported to be within the range of 0.8–1.9 K33,34,35. Several studies have compared the two for lakes over the TP region, which showed biases (LSWT versus in situ) of −1.74 °C18 and −1.4 °C8. Here, due to a lack of field observations in the TP, we did not directly compare our data set with in situ measurements, instead, in the following section, we compared the change rates calculated from our data set with those from the above-mentioned publications which had already validated using in situ mesurements8,18.

Evaluation of change rates from different data sources

Using the data set produced in this study, Figure 6 shows change rates of LSWT for the observed 374 lakes in both nighttime and daytime during 2001–2015. Note that long-term trends in LSWT showed opposite patterns in nighttime and daytime, with overall trends of 0.037±0.044 °C/year in nighttime and −0.054±0.051 °C/year in daytime. For nighttime data, 70% of the lakes showed increasing rates (mean 0.076±0.043), while only 30% showed decreasing rates (mean −0.053±0.045). For daytime data, the majority of lakes (71%) showed decreasing rates with a pretty low mean value of −0.095±0.053. 19%/21% of the lakes show consistent trend (warming/cooling) across day/night. This is generally consistent with results from 56 large lakes investigated in Song et al.18. We further compared our change rates with results published in the above-mentioned two studies, i.e., the 2001–2012 data for nighttime generated by Zhang et al.8 and the 2001–2015 data for both nighttime and daytime generated by Song et al.18. Both of the two data records used MOD11A2 as the original data source and compared with in situ measurements of both surface temperature and air temperature. Figure 7(a) shows the correlations between the change rates of LSWT derived from the generated new data set and those from Zhang et al.8. The two data sets showed good agreement with correlation coefficient of R=0.84. Note that our data are slightly higher than Zhang’s in general. This is reasonable since, for estimating LSWT, we averaged values of all pixels within the lake buffer boundaries whereas Zhang et al.8 used the averages from a 3×3 pixel window in the center of each lake. That method (Zhang et al.8), however, restricted the qualified lakes to only 56, whereas our method of utilizing every available non-cloud pixel value of each lake allowed 374 lakes qualified for value extraction, resulting in a more comprehensive and detailed picture of variations in LSWT across the TP. Figure 7(b) shows the correlations of the change rates of LSWT between our new data set and the data set generated by Song et al.,18 for both nighttime (R=0.72) and daytime (R=0.54). The reasons for this discrepancy between the two are perhaps attributed to different methods used for deriving lake boundaries and filtering. Lake boundaries from the Song’s data were static which were generated using the water index based on the NIR/Green ratio of Landsat TM images mainly from the year 2008, whilst we used four lake boundary shapefiles manually extracted from satellite images to account for lake water fluctuations during the 15-years period. The relatively lower consistency between the two for daytime is mainly attributed to the effects of solar irradiance from inconsistent lake boundaries inherited in the Song et al.18 method. In other words, this shows an accuracy difference between the two data sets, depending on lake size, since the smaller lakes or those that experienced greater changes, the LSWT would deviate more from a static lake boundary.

Figure 6. Change rates of LSWT for the observed 374 lakes in both nighttime (upper panel) and daytime (bottom panel) over 2001–2015.

Figure 6

Open in a new tab

Blue and red solid circles represent positive and negative change rates, respectively. The values on lower left of each panel are the mean rate of change (°C/year)±the s.e. for all, positive, negative lakes, respectively.

Figure 7. Correlations of change rates of LSWT derived from the generated data set and that from the other two data sets.

Figure 7

Open in a new tab

(a) Zhang et al.8; (b) Song et al.18. Error bars in (a) is the s.e. for trend estimation calculated using method described in Zhang et al.8.

Additional Information

How to cite this article: Wan, W. et al. A comprehensive data set of lake surface water temperature over the Tibetan Plateau derived from MODIS LST products 2001–2015. Sci. Data 4:170095 doi: 10.1038/sdata.2017.95 (2017).

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary Material

sdata201795-isa1.zip (11KB, zip)

Acknowledgments

This study is jointly supported by the National Natural Science Foundation of China (NSFC) project (Grant No. 91437214, No. 41501360, and No.91547210) and the China Postdoctoral Science Foundation (Grant No. 2015M570109). We thank Yue Wang from Wuhan University for her contributions to early data processing. All colleagues involved in producing this data set are highly appreciated. MODIS MOD11A2 products from 2001–2015 were obtained from https://lpdaac.usgs.gov, maintained by the NASA EOSDIS Land Processes Distributed Active Archive Center (LP DAAC) at the USGS/Earth Resources Observation and Science (EROS) Center, Sioux Falls, South Dakota.

Footnotes

The authors declare no competing financial interests.

Data Citations

  1. Wan W., Hong Y., Xie H. 2017. Figshare. http://dx.doi.org/10.6084/m9.figshare.4975835

References

  1. Williamson C. E., Saros J. E. & Schindler D. W. Sentinels of Change. Science 323, 887–888 (2009). [DOI] [PubMed] [Google Scholar]
  2. Pareeth S., Salmaso N., Adrian R. & Neteler M. Homogenised daily lake surface water temperature data generated from multiple satellite sensors: A long-term case study of a large sub-Alpine lake. Scientific Reports 6, 31251 (2016). [DOI] [PMC free article] [PubMed] [Google Scholar]
  3. Livingstone D. M. Impact of secular climate change on the thermal structure of a large temperate central European lake. Climatic Change 57, 205–225 (2003). [Google Scholar]
  4. O'Reilly C. M. et al. Rapid and highly variable warming of lake surface waters around the globe. Geophysical Research Letters 42, 10,773–710,781 (2015). [Google Scholar]
  5. Schneider P. & Hook S. J. Space observations of inland water bodies show rapid surface warming since 1985. Geophysical Research Letters 37, L22405 (2010). [Google Scholar]
  6. Moukomla S. & Blanken P. Remote sensing of the North American Laurentian Great Lakes’ surface temperature. Remote Sensing 8, 286 (2016). [Google Scholar]
  7. Torbick N., Ziniti B., Wu S. & Linder E. Spatiotemporal lake skin summer temperature trends in the Northeast United States. Earth Interactions 20, 1–21 (2016). [Google Scholar]
  8. Zhang G. et al. Estimating surface temperature changes of lakes in the Tibetan Plateau using MODIS LST data. Journal of Geophysical Research: Atmospheres 119, 8552–8567 (2014). [Google Scholar]
  9. Yao T. et al. Different glacier status with atmospheric circulations in Tibetan Plateau and surroundings. Nature Climate Change 2, 663–667 (2012). [Google Scholar]
  10. Shichang K. et al. Review of climate and cryospheric change in the Tibetan Plateau. Environmental Research Letters 5, 015101 (2010). [Google Scholar]
  11. Wan W. et al. A lake data set for the Tibetan Plateau from the 1960s, 2005, and 2014. Scientific Data 3, 160039 (2016). [DOI] [PMC free article] [PubMed] [Google Scholar]
  12. Song C., Huang B., Richards K., Ke L. & Hien Phan V. Accelerated lake expansion on the Tibetan Plateau in the 2000s: Induced by glacial melting or other processes? Water Resources Research 50, 3170–3186 (2014). [Google Scholar]
  13. Zhang G. et al. Extensive and drastically different alpine lake changes on Asia's high plateaus during the past four decades. Geophysical Research Letters 44, 252–260 (2017). [Google Scholar]
  14. Zhang G., Xie H., Kang S., Yi D. & Ackley S. F. Monitoring lake level changes on the Tibetan Plateau using ICESat altimetry data (2003–2009). Remote Sensing of Environment 115, 1733–1742 (2011). [Google Scholar]
  15. Song C., Ye Q., Sheng Y. & Gong T. Combined ICESat and CryoSat-2 altimetry for accessing water level dynamics of Tibetan lakes over 2003–2014. Water 7, 4685 (2015). [Google Scholar]
  16. Yang R. et al. Spatiotemporal variations in volume of closed lakes on the Tibetan Plateau and their climatic responses from 1976 to 2013. Climatic Change 140, 621–633 (2017). [Google Scholar]
  17. Song C., Huang B. & Ke L. Modeling and analysis of lake water storage changes on the Tibetan Plateau using multi-mission satellite data. Remote Sensing of Environment 135, 25–35 (2013). [Google Scholar]
  18. Song K. et al. Spatiotemporal variations of lake surface temperature across the Tibetan Plateau using MODIS LST product. Remote Sensing 8, 854 (2016). [Google Scholar]
  19. MacCallum S. N. & Merchant C. J. Surface water temperature observations of large lakes by optimal estimation. Canadian Journal of Remote Sensing 38, 25-4525-4545 (2012). [Google Scholar]
  20. Sharma S. et al. A global database of lake surface temperatures collected by in situ and satellite methods from 1985–2009. Scientific Data 2, 150008 (2015). [DOI] [PMC free article] [PubMed] [Google Scholar]
  21. Riffler M., Lieberherr G. & Wunderle S. Lake surface water temperatures of European Alpine lakes (1989–2013) based on the Advanced Very High Resolution Radiometer (AVHRR) 1 km data set. Earth System Science Data 7, 1–17 (2015). [Google Scholar]
  22. Woolway R. I., Jones I., Feuchtmayr H. & Maberly S. A comparison of the diel variability in epilimnetic temperature for five lakes in the English Lake District. Inland Waters 5, 139–154 (2015). [Google Scholar]
  23. Woolway R. I. et al. Diel surface temperature range scales with lake size. PLoS ONE 11, e0152466 (2016). [DOI] [PMC free article] [PubMed] [Google Scholar]
  24. Wan W. et al. Monitoring lake changes of Qinghai-Tibetan Plateau over the past 30 years using satellite remote sensing data. Chinese Science Bulletin 59, 1021–1035 (2014). [Google Scholar]
  25. Ma R. et al. China's lakes at present: Number, area and spatial distribution. Science China Earth Sciences 41, 394–401 (2010). [Google Scholar]
  26. Zhang G., Yao T., Xie H., Zhang K. & Zhu F. Lakes’ state and abundance across the Tibetan Plateau. Chinese Science Bulletin 59, 3010–3021 (2014). [Google Scholar]
  27. Ma R. et al. A half-century of changes in China's lakes: Global warming or human influence? Geophysical Research Letters 37, L24106 (2010). [Google Scholar]
  28. Wan Z. MODIS land surface temperature products user's guide (Collection-6). Institute for Computational Earth System Science, University of California. http://www.icess.ucsb.edu/modis/LstUsrGuide/usrguide.html (2013). [Google Scholar]
  29. Liu G. et al. Validating and Mapping Surface Water Temperatures in Lake Taihu: Results From MODIS Land Surface Temperature Products. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing 8, 1230–1244 (2015). [Google Scholar]
  30. Cleveland W. S. Robust Locally Weighted Regression and Smoothing Scatterplots. Journal of the American Statistical Association 74, 829–836 (1979). [Google Scholar]
  31. Shen J., Zhang C., Xu X., Xin P. & Ma Y. Variation characteristics of surface temperature in Qaidam Basin 1980-2015. Chinese Agricultural Science Bulletin 32, 58–64 (2016). [Google Scholar]
  32. Hook S. J. et al. Retrieval of lake bulk and skin temperatures using Along-Track Scanning Radiometer (ATSR-2) data: A case study using Lake Tahoe, California. Journal of Atmospheric and Oceanic Technology 20, 534–548 (2003). [Google Scholar]
  33. Crosman E. T. & Horel J. D. MODIS-derived surface temperature of the Great Salt Lake. Remote Sensing of Environment 113, 73–81 (2009). [Google Scholar]
  34. Schneider P. et al. Satellite observations indicate rapid warming trend for lakes in California and Nevada. Geophysical Research Letters 36, n/a–n/a (2009). [Google Scholar]
  35. Sima S., Ahmadalipour A. & Tajrishy M. Mapping surface temperature in a hyper-saline lake and investigating the effect of temperature distribution on the lake evaporation. Remote Sensing of Environment 136, 374–385 (2013). [Google Scholar]
  36. Code for China Lake Name. in China Industrial Standard SL261-98 (China Water Power Press, 1998). [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Data Citations

  1. Wan W., Hong Y., Xie H. 2017. Figshare. http://dx.doi.org/10.6084/m9.figshare.4975835

Supplementary Materials

sdata201795-isa1.zip (11KB, zip)

Articles from Scientific Data are provided here courtesy of Nature Publishing Group

RESOURCES