Identification of nonserotypeable Shigella spp. using genome sequencing: a step forward

Abstract

Aim:

Sequencing technology has replaced conventional methods in identifying and characterizing bacterial pathogens. We characterized 23 nonserotypeable Shigella that biochemically resembled Shigella spp. using whole genome sequencing.

Materials & methods:

Genome sequences were analyzed using online tools based on 16S rRNA, k-mer, gyrB sequences and analysis of O-antigen arrangement was done using PATRIC database for species identification. Sequence types, plasmid types, antimicrobial resistance and virulence genes were also investigated.

Results:

The SpeciesFinder using 16S rRNA sequences identified only 74% of the isolates, whereas KmerFinder and gyrB sequence analysis identified 100% of the isolates to its species level. Antimicrobial resistance, virulence and plasmid incompatibility groups were identified in all the isolates. Sequence types were determined.

Conclusion:

This study shows that whole genome sequencing approach for Shigella O-antigen analysis has greater discriminative power than other methods using different bioinformatics pipeline for identification of nonserotypeable Shigella.

Lay abstract

Shigellosis is one of the major health concerns in developing countries. Shigella spp. that is not serotypeable with available antisera is a hurdle in laboratory diagnosis. Sequencing technology has replaced conventional methods in identifying nonserotypeable Shigella. In this study, we characterized 23 nonserotypeable Shigella using whole genome sequences. Manual comparison of O-antigen gene arrangement provided definitive results compared with other methods. Development of a database including whole genome sequencing of all known serotypes will help in easy identification of Shigella serotypes in the future.

Shigella species have been reported to be the major cause of human gastroenteritis in developing countries. This includes S. dysenteriae, S. flexneri, S. boydii and S. sonnei. The diarrheal disease caused by Shigella is highly contagious due to its low infectious dose. Identification of the bacterial species in clinical specimens is crucial for choosing optimal treatment and for infection control measures. Identification of Shigella spp. by biochemical characteristics is suboptimal and requires serotyping for complete identification [1]. The variability of O antigen provides the major basis for serotyping of many Gram-negative bacteria, and it is the only antigen used for serotyping of Shigella as they lack H and K antigens [2]. Rarely, the genus Shigella is difficult to serotype with the available Shigella polyvalent and monovalent antisera, which could be due to morphological transition from smooth to rough forms. Rough isolates do not produce O-antigen (which is responsible for serological diversity) due to mutations in one or more of the multiple genes controlling O-antigen synthesis and polymerization [3]. Further, the modification in the S. flexneri O-antigen backbone except serotype 6 gives rise to different serotypes due to the addition of glucosyl, O-acetyl or phosphoethanolamine groups to one or more sugars [4].

Several studies have reported that Shigella spp. and other closely related species (such as enteroinvasive E. coli) share a similar pathogenic mechanism, yet it is essential to discriminate due to their clinical relevance and for outbreak responses. This close relatedness makes biochemical- and serological-based identification difficult. Although various molecular methods like restriction fragment length polymorphism targeting the rfb and fliC gene, ribotyping, PFGE (pulse field gel electrophoresis), MALDI-TOF MS and PCR-based methods including ERIC (Enterobacterial Repetitive Intergenic Consensus)-PCR have been proposed in the past years, the discrimination between the species is still challenging [5,6].

Recently, a whole-genome sequence (WGS) based analysis using publicly available bioinformatics tool was found to replace traditional methods. WGS analysis shows better discrimination between closely related species and can provide clinically relevant information [7]. The report by Chattway et al., showed that the k-mer-based identification approach on whole genome data effectively differentiated Shigella from E. coli and provided information on phylogenetic relationship [8].

In this study, we studied the whole genome of 23 nontypeable Shigella isolates by various in-silico methods. Multiple analyses using organism-specific bioinformatics pipeline were performed to resolve the identification difficulty. Additionally, the isolates were investigated for the presence of antimicrobial resistance (AMR) genes, plasmids. Sequence types were also determined.

Materials & methods

Bacterial strains

Seven hundred and sixty four Shigella isolates were collected during the years 2011–2015 at Christian Medical College, Vellore, India. All the strains were isolated from stool specimens of patients with gastroenteritis. Individual isolates were characterized using standard biochemical tests [9]. Serologic identification was done by slide agglutination test using polyvalent somatic (O) antigen grouping sera, followed by monovalent antisera (Denka, Seiken, Japan) for Shigella specific serotype identification. Twenty-three Shigella isolates out of 48 Shigella spp. that were identified to be nonagglutinable with either poly- or monovalent Shigella antisera were randomly selected and included in the study for further characterization.

Antimicrobial susceptibility testing

All the isolates were tested for antimicrobial susceptibility against the following antibiotics: ampicillin (10 μg), trimethoprim/sulfamethoxazole (1.25/23.75 μg), nalidixic acid (30 μg), norfloxacin (10 μg), cefotaxime (30 μg) and cefixime (5 μg) by disc diffusion method. Results were interpreted using Clinical and Laboratory Standards Institute Guidelines 2015 [10]. Quality control strains used were: E. coli ATCC 35218 for ampicillin and E. coli ATCC 25922 for rest of the antibiotics.

Next generation sequencing

The WGS for the study strains were performed using Ion Torrent (PGM, Life Technologies, CA, USA) with 400-bp read chemistry (Life Technologies). Library preparations were performed according to manufacturer's instructions using (Ion Plus Fragment Library Kit; Life Technologies). Genomic library was purified using AMPure beads, and concentrations were determined using the Qubit 3.0 fluorimeter (Invitrogen, Merelbeke, Belgium). Emulsion PCR was performed on pooled libraries (Ion One Touch Hi-Q 400 Template Kit v2 DL Kit; Life Technologies), and template-positive Ion Sphere particles were enriched using Dynabeads Myone streptavidin C1 beads. Finally pooled samples were loaded on an Ion 318 chip for sequencing.

Assembly & annotation

The generated whole genome data were assembled de novo using AssemblerSPAdes v.5.0.0.0 embedded in Torrent suite server v.5.0.4. The genome sequence was annotated using PATRIC, the bacterial bioinformatics database and analysis resource (www.patricbrc.org), and the NCBI Prokaryotic Genome Automatic Annotation Pipeline (www.ncbi.nlm.nih.gov/genomes/static/Pipeline.html) [11].

Downstream genome analysis

The whole genome data were analyzed using open access tools at Center for Genomic Epidemiology (CGE) web-based server. Sequence types for the study isolates were determined using multilocus sequence typing 1.8 tool (MLST 1.8) (https://cge.cbs.dtu.dk//services/MLST/) [12], AMR and virulence genes were identified using ResFinder 2.1 (https://cge.cbs.dtu.dk//services/ResFinder/) [13] and VirulenceFinder 1.5 (https://cge.cbs.dtu.dk//services/VirulenceFinder/) [14] with the 90% threshold for identity and with 60% of minimum length coverage. Presence of plasmids were analyzed using PlasmidFinder 1.3 (https://cge.cbs.dtu.dk//services/PlasmidFinder/) [15] with 95% threshold for identity.

WGS analysis for identification of nonserotypeable Shigella

Species identification using 16S rRNA sequence analysis

SpeciesFinder 1.0 predicts species based on their 16S rRNA gene, where the assembled genome sequences will be aligned against the16S rRNA sequences from the database using the default BLAST algorithm (https://cge.cbs.dtu.dk/services/SpeciesFinder/) [16]. The best BLAST hit was chosen based on the query coverage, % identity, number of mismatches and number of gaps in the alignments.

k-mer-based species identification

This method finds the unique k-mers in the input sequence and predicts species based on the number of overlapping k-mers, that is, 16-mers, between the query genome and genomes in a reference database. The prediction was made at which it has the highest number of 16-mers in common despite of position. The program ran with the ‘winner takes it all’ scoring method (https://cge.cbs.dtu.dk/services/KmerFinder/) [7].

gyrB sequence based species identification

Shigella genomes were analyzed for gyrB gene sequences to classify closely related species. The query gyrB sequences obtained from WGS were manually BLAST matched using NCBI pipeline [17].

Manual serotype identification using O-antigen gene cluster

The number of genes in O-antigen clusters varies and strains of different serotypes can show completely different gene sets. The sequential arrangements of O-antigen genes which are usually bordered by galF and gnd genes were compared manually with those available as Shigella WGS database in the PATRIC database [18].

Phylogenetic analysis

Phylogenetic analysis was performed for gyrB sequences of the isolates on the Phylogeny.fr platform. Sequences were aligned with MUSCLE (v3.8.31) with the default settings. After alignment, gaps and poorly aligned sequences were removed with Gblocks (v0.91b) using the following parameters: minimum length of a block after gap cleaning: ten, no gap positions were allowed in the final alignment, all segments with contiguous nonconserved positions bigger than eight were rejected and minimum number of sequences for a flank position: 85%.

The phylogenetic tree was reconstructed using the maximum likelihood method implemented in the PhyML program (v3.1/3.0 aLRT). The HKY85 substitution model was selected assuming an estimated proportion of invariant sites (of 0.910) and four γ-distributed rate categories to account for rate heterogeneity across sites. The γ-shape parameter was estimated directly from the data (γ = 95.586). Reliability for internal branch was assessed using the aLRT test (SH-Like). Graphical representation and edition of the phylogenetic tree were performed with TreeDyn (v198.3) [19,20].

Results

From 2011 to 2015, a total of 716 Shigella species with known serotypes were isolated with S. flexneri the predominant serogroup followed by S. sonnei (Figure 1).

Figure 1. . Serogroup distribution of Shigella from feces specimens over 5 years (2011–2015).

AMR profile

Among the selected isolates 48% were found to be multidrug resistant. The isolates showed 69% resistance to nalidixic acid followed by trimethoprim/sulfamethoxazole 66%, ampicillin 52%, cefotaxime 17%, norfloxacin 13% and cefixime 4%, respectively. The antimicrobial susceptibility trends of nonserotypeable and typeable Shigella spp. over the past 5 years are presented in Figure 2.

Figure 2. . Antimicrobial susceptibility trend of serotypeable and nonserotypeable Shigella spp. over 5 years (2011–2015).

Genome analysis of nonserotypeable Shigella

SpeciesFinder

SpeciesFinder predicts the prokaryotic species based on the 16S rRNA gene similarity with the known reference sequence. This method identified eleven isolates (FC1, FC 2, FC6–FC9, FC14–FC17 and FC20) as S. boydii, three isolates (FC10–FC12) as S. flexneri but failed to identify the species for six isolates (FC3–FC5, FC13, FC18 and FC19). Further three isolates (FC21–FC23) were identified as E. coli (Table 1).

Table 1. . Comparative analysis of SpeciesFinder, KmerFinder, gyrB sequence and O-antigen gene sequence based identification of nonserotypeable Shigella.

Isolate ID	Manual analysis using PATRIC	Center for Genomic Epidemiology		BLAST gyrB sequence analysis	Sequence types
		SpeciesFinder	KmerFinder
FC1	S. boydii	S. boydii	S. boydii	S. boydii	145
FC2	S. boydii	S. boydii	S. boydii	S. boydii	145
FC3	S. boydii	Matching failed	S. boydii	S. boydii	243
FC4	S. boydii	Matching failed	S. boydii	S. boydii	145
FC5	S. boydii	Matching failed	S. boydii	S. boydii	145
FC6	S. boydii	S. boydii	S. boydii	S. boydii	145
FC7	S. boydii	S. boydii	S. boydii	S. boydii	145
FC8	S. boydii	S. boydii	S. boydii	S. boydii	145
FC9	S. boydii	S. boydii	S. boydii	S. boydii	145
FC10	S. flexneri 2a	S. flexneri	S. flexneri	S. flexneri	245
FC11	S. flexneri 2a	S. flexneri	S. flexneri	S. flexneri	245
FC12	S. flexneri 2a	S. flexneri	S. flexneri	S. flexneri	245
FC13	S. dysenteriae	Matching failed	S. boydii	S. boydii†	148
FC14	S. dysenteriae	S. boydii	S. boydii	S. boydii†	148
FC15	S. dysenteriae	S. boydii	S. boydii	S. boydii†	148
FC16	S. dysenteriae	S. boydii	S. boydii	S. boydii†	148
FC17	S. dysenteriae	S. boydii	S. boydii	S. boydii†	148
FC18	–	Matching failed	S. boydii	S. boydii	243
FC19	–	Matching failed	S. boydii	S. boydii†	148
FC20	–	S. boydii	S. boydii	S. boydii†	148
FC21	–	E. coli	E. coli	E. coli	6199
FC22	–	E. coli	E. coli	E. coli	6199
FC23	–	E. coli	E. coli	E. coli	6270

^†Isolates with only 99% identity.

KmerFinder

KmerFinder identified the isolates (FC1–FC9, FC13–FC20) as S. boydii and isolates FC10, FC11 and FC12 as S. flexneri. The three isolates (FC21, 22 and 23) showed similar results as that of SpeciesFinder, by k-mer method and were identified as E. coli. (Table 1).

GyrB sequence based species identification

This method targets gyrB gene that encode the subunit B protein of DNA gyrase (topoisomerase type II protein). gyrB gene sequences has greater divergence values between the closely related species. BLAST matching the query sequence resulted in identification of the species based on sequence similarity. The results of gyrB gene sequence analysis matches with that of KmerFinder as shown in Table 1. But this method identified seven isolates as S. boydii only with 99% identity to the reference genome available in the NCBI database.

Manual serotype identification by O-antigen gene analysis

The genome sequence analysis revealed that the O-antigen structure of the isolates FC1–FC 9 matched with the reference strain S. boydii in the database. Isolates FC10–FC12 were found to be S. flexneri 2a, and was concordant with all methods. In contrast, five isolates (FC13–FC17) had O-antigen structure similar to S. dysenteriae through manual comparison but was identified as S. boydii by other three methods. However, the O-antigen gene arrangement of five isolates (FC18–FC22) did not match with any of the reference Shigella sequence in the PATRIC database.

MLST/AMR/virulence identification

MLST reveals the sequence type of the isolates based on allelic profile. The sequence types of the isolates were determined using E. coli MLST database [23]. Shigella boydii isolates (n = 9) were found to have two sequence types, ST145 and ST243 (Table 1). Five isolates identified as S. dysenteriae belong to ST148, and three S. flexneri isolates were identified as ST245.

Acquired AMR genes were identified in all except four isolates (FC4, 5, 11 and 23). The virulence genes responsible for Shigella pathogenesis are located in the chromosome and in the invasion (inv) plasmid. Multiple virulence factors were identified in 22 isolates using VirulenceFinder tool and are given in Table 2. Plasmid analysis revealed the presence of various incompatibility groups among the isolates, of which IncFII was the most common type (n = 19). Five isolates (FC4, FC5, FC10, FC12 and FC23) were found to have either AMR genes or plasmids (Table 2) and one isolate (FC11) neither had any AMR genes nor plasmids.

Table 2. . Genomic characteristics of nonserotypeable Shigella (n = 23).

Isolate ID	Total size (bp)	Antimicrobial resistance profile	ResFinder	VirulenceFinder	PlasmidFinder	Accession
FC1	4511440	SXT-NAL	strA, strB, aadA1, sul2, dfrA1	iha, senB, ipaD, virF	IncFII	MDDI00000000
FC2	4669256	AMP-SXT	strA, strB, blaTEM1B, qnrS1, sul2, tetA, dfrA14	virF, ipaD, senB, ipaH, iha	IncFII, IncFIB	MDDH00000000
FC3	4553246	SXT-NAL-FIX	aadA1, sul1, tetA, dfrA1, dfrA4	virF, capU, ipaD, ipfA, senB, iha	IncA/C2, IncFII	MDGW00000000
FC4	4561671	–	–	iha, capU, ipaD, sigA,senB, virF	IncFII	MDJL00000000
FC5	4579536	AMP-SXT-NAL	–	iha, capU, sigA, ipaD, senB, virF	IncFII	MIIV00000000
FC6	4556438	AMP-SXT	strA, strB, blaTEM-1B, qnrS1, sul2, tetA, dfrA14	iha, capU, sigA, ipaD, senB, virF	IncFII, IncFIB	MINP00000000
FC7	4514218	SXT-NAL-NOR	aadA1, dfrA1	senB, ipaD, iha, virF, capU, sigA	IncFII	MINQ00000000
FC8	4512137	SXT	aadA1, dfrA1	senB, ipaD, virF, iha, capU, sigA	IncFII	MINR00000000
FC9	4622022	AMP-SXT-NAL†	strA.strB, blaTEM-1B, qnrS1, sul2, dfrA14	iha, capU, sigA, ipaD, senB, virF	IncFII, IncFIB	MINU00000000
FC10	4378269	AMP-SXT-NAL-NOR†	strA, strB, aadA1, blaOXA-1, sul2, tetB, dfrA1	ipfA, pic, sigA	–	MDJJ00000000
FC11	4309816	AMP-SXT	–	ipfA	–	MECX00000000
FC12	4411934	AMP-SXT-NAL-NOR†	strA, strB, blaOXA1, sul2, tetB, dfrA1	ipaH, ipfA, pic, sigA	–	MDJI00000000
FC13	4558192	NAL-TAX	strA, strB, aadA1, sul2, tetB, dfrA1	capU, virF, ipaD, sigA, senB, ipfA, iha	IncFII	MECW00000000
FC14	4561234	SXT	aadA1, blaOXA-1, tetB, dfrA1	capU, ipaD, sigA, senB, iha, ipfA, virF	IncFII	MIIX00000000
FC15	4655758	NAL	tetB, dfrA1	capU, ipaD, senB, ipfA, sigA, iha, virF	IncFII	MIIY00000000
FC16	4575582	AMP-NAL-TAX	aadA1, blaOXA-1, tetB, dfrA1	capU, virF, ipaD, sigA, senB, ipfA, iha	IncFII	MINS00000000
FC17	4561447	AMP-NAL-TAX	aadA1, blaOXA-1, tetB, dfrA1	capU, ipaD, iha, sigA,senB, ipfA, virF	IncFII	MINT00000000
FC18	4502544	AMP-SXT-NAL	strA, strB, aadA1, blaTEM-1B, qnrS1, sul2, dfrA1	ipfA, capU, ipaD, virF, senB, iha, sigA	IncN, IncFII	MDJK00000000
FC19	4458457	AMP-SXT-NAL	strA, strB, blaTEM-1B, qnrS1, sul2, dfrA14	capU, ipaD, sigA,senB, iha, ipfA, virF	IncFII, IncFIB	MECT00000000
FC20	4651491	AMP-SXT-NAL	strA, strB, aadA1, blaOXA-1, sul2, tetB, dfrA1	capU, ipaD, iha, sigA, senB, ipfA, virF	IncFII	MINV00000000
FC21	5432092	–	dfrA5, sul1	senB, sat, capU, iha, ipfA	IncFII, Col(BS512), ColpVC, IncFIB, IncB/O/K/Z	MDES00000000
FC22	5416583	NAL-TAX	dfrA5, sul1	senB, iha, sat, capU, ipfA	IncFII, IncFIB, Col(BS512), IncB/O/K/Z. Col156	MDDJ00000000
FC23	4664034	NAL	–	–	IncX1	MECV00000000

^†Intermediate susceptible.

Phylogenetic analysis of gyrB gene

Along with the study isolates, known gyrB sequence data of S. dysenteriae, S. boydii, S. flexneri and E. coli were included to deduce the relationship between isolates. Within these three strains, FC21, 22 and 23, were E. coli, while other strains were Shigella spp. which is related to their common ancestor E. coli. FC10, 11 and 12 form a branch and matches with S. flexneri, while others are related to S. boydii and formed a separate clade. In this clade, 8 strains (FC1, 2, 4, 5, 6, 7, 8 and 9) were found to be S. boydii, from which two branches were evolved. One branch had seven strains (FC13, 14, 15, 16, 17, 19 and 20) with 92% similarity with S. boydii and the other had two strains (FC3 and 18) with 95% similarity with S. dysenteriae. The phylogenetic tree for the isolates based on their gyrB gene sequences is shown in the Figure 3.

Figure 3. . Phylogenetic tree was constructed using maximum likelihood method of nucleotide sequences of gyrB genes for the study isolates.

Discussion

Although Shigella and E. coli share common characteristics there is often a clinical or public health need to differentiate these pathogens as they have different entities in epidemiology and clinical medicine. The incidence of new variants of Shigella serotype which do not agglutinate with commercially available antisera is increasing [21]. Studies on molecular characterization of such isolates are very rare especially in developing countries with a lower resource setting. In one such study, research from Kolkata, India, characterized 13 provisional serovars of Shigella with respect to their AMR, plasmids, virulence genes and PFGE profiles [21].

Sequence types identified in the current study are reported earlier. Previous studies have shown that the sequence type ST245 was found in various S. flexneri serotypes (1a, 1b, 2a, 2b, 3a, 3b, 3c, 4a, 4b, 4c and X) [22]. ST243 was recognized in S. flexneri serotypes 6 and 6a, S. boydii 1, 3, 6, 8, 10 and18 and S. dysenteriae 5 and 7. Several STs may be present within a serotype, therefore categorizing the serotypes based on the ST's is not possible [22].

Previous studies from Iran and other countries observed that the tetracycline resistance was seen in the majority of the clinical Shigella strains due to the development of intrinsic resistance to this antibiotic. Shahsavan et al., reported the MLST of multidrug resistant Shigella spp. and found that ampicillin resistance was frequently observed in ST245 and tetracycline susceptibility in S. flexneri ST145 strain. This suggests that isolates with different sequence types correspond to specific AMR patterns. Regular evaluation of ST and AMR data will help to treat shigellosis caused by resistant strains [23]. In this study, eight isolates identified as S. boydii belong to ST145. Novel sequence types were obtained for E. coli (ST6199 and ST6270) in this study and have not been reported earlier.

Genome annotation results showed more than 50-times coverage for all the isolates. The genome sequences were analyzed in-silico by different methods using various web-based tools for species identification. SpeciesFinder, which is based on the 16S rRNA gene, had shown lesser resolution than the other methods discussed in this study, which identified only 17 isolates to species level. This could be due to substantial intergene variation and the fact that 16S rRNA gene corresponds to 0.1% of the coding part of a microbial genome (Table 3). Bacterial identification using 16S rRNA sequencing was reported to have limitations such as its inability to distinguish atypical E. coli from Shigella spp. The sequence similarities of S. flexneri, S. sonnei and S. boydii with E. coli were reported to be 99.8, 99.9 and 99.7%, respectively [24]. This shows that the species identification by 16S rRNA sequences is not reliable and accurate.

Table 3. . 16S rRNA sequence similarity within Shigella species.

Organism	S. dysenteriae	S. boydii	S. sonnei	S. flexneri	S. flexneri 5a
S. dysenteriae	100
S. boydii	98.72	100
S. sonnei	98.79	99.4	100
S. flexneri	99.06	99.66	99.73	100
S. flexneri 5a	98.86	99.47	99.68	99.8	100

KmerFinder identified all the isolates to species level. The method predicts the species based on the closest match to the isolate in the k-mer database. Among the tested isolates, FC17 and 12 isolates results were in concordance with the SpeciesFinder and PATRIC respectively.

The gyrB gene sequence analysis presented better results when compared with 16S rRNA analysis; this is in accordance with the previous study, where gyrB gene analysis was found to be effective in classifying closely related species [17]. The results obtained by this method matched with KmerFinder results. This can be explained as the rate of genetic divergence of gyrB sequences differed greatly from 16S rRNA sequence and have four- to tenfold increase in the length of branches between closely related species of Shigella and E. coli. The percent divergences of E. coli from S. sonnei, S. flexneri and S. boydii were 1.9, 2.3 and 2.0%, respectively, indicating the reliability of gyrB gene sequence analysis method than 16S rRNA analysis [24]. However, this method identified few isolates with only 99% identity and does not provide accurate (100%) identification results.

Analysis of O-antigen gene cluster arrangement using PATRIC revealed the isolates FC18–FC23 did not match with any known Shigella sequences in the PATRIC database, which could be due to limitations inherent to the database. However, the rest of the isolates showed similar results to those of SpeciesFinder, KmerFinder and gyrB sequence analysis methods.

Five isolates (FC13–FC17) was identified as S. dysenteriae through manual comparison of O-antigen using PATRIC but were misidentified as S. boydii by the other three methods. Traditionally, S. boydii and S. dysenteriae are physiologically similar but were differentiated biochemically by the mannitol test and these two species can be found within the same STs, which shows their close phylogenetic relationship.

Overall, SpeciesFinder, based on the 16S rRNA gene analysis, showed poor performance, which can identify only 74% of the isolates up to species level. KmerFinder and gyrB sequence analysis both identified 100% of the isolates to the species level despite its accuracy.

Occasionally, O-antigen modification within the species affects the serotyping assay and makes the strain untypeable. The modification is widely seen in S. flexneri serotypes (1a, 1b, 2a, 5a and Y) as these have bacteriophage-mediated serotype conversion [4]. Consequently the laboratory identification of Shigella by agglutination method becomes difficult with commercially available polyvalent-antisera and may not cover all possible epitopes of the Shigella O-antigen. Another problem is due to high genetic similarity between Shigella and E. coli and in fact that majority of Shigella O antigens cross-react serologically with some strains of E. coli O antigen [2]. It was found that cross-reacting strains of Shigella spp. and E. coli may express shared lipopolysaccharide epitopes yet their lipopolysaccharide structures are not identical [25]. Therefore, differentiation between Shigella and cross-reacting enteroinvasive E. coli strains are often difficult as both show similar biochemical traits and can cause dysentery using the same mode of invasion [26].

In contrast to the earlier study by Dutta et al. [21] who demonstrated that multidrug resistance was reported rarely in the provisional serovars of Shigella isolates, most of our study isolates were found resistant to first-line antibiotics like ampicillin, trimethoprim/sulfamethoxazole and nalidixic acid but were highly susceptible to second-generation quinolone (norfloxacin) and third-generation cephalosporin (cefotaxime and cefixime). The nontypeable Shigella isolates from our setting over the last 5 years showed susceptibility of around 90% to norfloxacin, cefotaxime and cefixime in contrast to typeable Shigella isolates but had similar resistance profile for ampicillin. Serotypeable isolates were highly resistant to co-trimoxazole and nalidixic acid compared with nontypeable isolates.

Further, the study isolates were found to harbor AMR genes through sequence analysis and the results correlate with the phenotypic resistance profile except for three isolates (FC5, FC11 and FC23). One isolate (FC21) does not show any resistance phenotypically but had AMR genes.

Molecular typing of nonserotypeable Shigella is important as this species represents the major causes of bacterial diarrhea in developing countries. This study shows that some limitations such as inability to distinguish closely related species were observed with the 16S rRNA sequence method, but this can be overcome by the k-mer approach and gyrB gene analysis. However, the manual comparison of O-antigen gene arrangement provided considerable and more definitive results than the k-mer and gyrB method in identifying the species although it could not identify a few isolates due to the lack of genome sequences of all Shigella serotypes in the database. This study underlines the need for genome sequences of all known Shigella serotypes reported till date, for detailed understanding of the species with enhanced resolution.

Limitations

A reference database including O-antigen sequences of all known serotypes of Shigella spp. was not available. Manual comparison of O-antigen arrangements is error prone; however, utmost care was taken to avoid such errors.

Conclusion & future perspective

The O-antigen determination of clinical Shigella isolates is essential for diagnostic and epidemiologic purpose. Knowledge on the distribution of different Shigella serotypes remains important as humans demonstrate only serotype-specific immunity. Therefore, the characterization of isolates using WGS could provide better results and have greater discriminative power compared with other commonly used methods. Development of a database including WGS of all known Shigella serotypes is required for future identification and comparison of nontypeable Shigella. Also, an SNP-based phylogenetic analysis will be a supporting evidence for Shigella serotype diversification.

Summary points.

Background

• Identification of the bacterial species in clinical specimens is crucial for choosing optimal treatment and for infection control measures.

• The discrimination between closely related species is still challenging. This close relatedness makes the biochemical and serological based identification difficult.

• Recently, whole genome sequencing technology has replaced the conventional methods in identifying and characterizing the bacterial pathogens.

• Here, we studied the whole genome of 23 nonserotypeable Shigella isolates to resolve the identification difficulty.

• Overall, SpeciesFinder, based on the 16S rRNA gene, had the poorest performance, which identifies only 74% of the isolates up to its species level.

• Whereas KmerFinder and gyrB sequence analysis, both had the highest performance and identify 100% of the isolates to the species level.

• The manual comparison of O-antigen gene arrangement was considered to be the reliable method for identifying nonserotypeable Shigella.

Conclusion

• Whole genome sequencing was found to have greater discriminative power compared with other commonly used methods.

• Also knowledge on the distribution of different Shigella serotypes remains important as humans demonstrate serotype specific immunity.