Skip to main content
Scientific Reports logoLink to Scientific Reports
. 2018 Sep 26;8:14593. doi: 10.1038/s41598-018-32556-2

Author Correction: A Low-Cost Non-explosive Synthesis of Graphene Oxide for Scalable Applications

Pranay Ranjan 1,, Shweta Agrawal 2, Apurva Sinha 1, T Rajagopala Rao 2, Jayakumar Balakrishnan 1,3, Ajay D Thakur 1,
PMCID: PMC6156589  PMID: 30254338

Correction to: Scientific Reports 10.1038/s41598-018-30613-4, published online 13 August 2018

This Article contains errors.

In panels (b) and (c) of Figure 6, ‘O-C-O/C=O’ is incorrectly given as ‘O-C-O’. The correct Figure 6 appears below as Figure 1.

Figure 1.

Figure 1

(a) Intensity (I) versus binding energy (B. E.) in the full scan range for the XPS of the rGO film obtained after a 2 hour exposure to a 4 Watt, 365 nm UV lamp. (b) A multiple peak deconvolution of the GO C1s XPS data (corresponding to –C–C–, –C=C–, –C–O, –O–C–O–, –OH and –C=O respectively). The inset in panel (a) shows the XPS data corresponding to Mn 2p binding energy region for the rGO sample. (c) rGO C1s XPS data for the sample along with the deconvoluted peak structure corresponding to –C–C–, –C=C–, –C–O, –O–C–O–, and –C=O are marked.

In addition, Supplementary Table S2 contains the following errors.

“-C=O”

should read:

“C-O”

and

“C-O-C”

should read:

“O-C-O/C=O”

Contributor Information

Pranay Ranjan, Email: pranjan@iitp.ac.in.

Ajay D. Thakur, Email: ajay.thakur@iitp.ac.in


Articles from Scientific Reports are provided here courtesy of Nature Publishing Group

RESOURCES