Cryo-EM structure of substrate-bound human telomerase holoenzyme

Summary

Telomerase adds telomeric repeats to chromosome ends to balance incomplete replication. Telomerase regulation is implicated in cancer, aging and other human diseases, but progress towards telomerase clinical manipulation is hampered by the lack of structural data. Here we present the cryo-electron microscopy structure of substrate-bound human telomerase holoenzyme at subnanometer resolution, describing two flexibly RNA-tethered lobes: the catalytic core with telomerase reverse transcriptase (TERT) and conserved motifs of telomerase RNA (hTR), and an H/ACA ribonucleoprotein (RNP). In the catalytic core, RNA encircles TERT, adopting a well-ordered tertiary structure with surprisingly limited protein-RNA interactions. The H/ACA RNP lobe comprises two sets of heterotetrameric H/ACA proteins and one Cajal body protein, TCAB1, representing a pioneering structure of a large eukaryotic family of ribosome and spliceosome biogenesis factors. Our findings provide a structural framework for understanding human telomerase disease mutations and represent an important step towards telomerase-related clinical therapeutics.

Linear eukaryotic chromosomes are capped by telomeric repeat tracts that recruit the telomere-binding proteins essential to distinguish telomeres from DNA breaks and thus avoid telomere end-resection and interchromosomal fusions^1,2. Due to inherently incomplete genome replication, telomeres are progressively shortened in each cell cycle³. Critically short telomeres result in genome instability and cell death^2,4,5. To compensate for this sequence loss, a specialized reverse transcriptase, telomerase, adds telomeric repeats to the chromosome 3’ end, using the telomerase reverse transcriptase (TERT), and an integral telomerase RNA subunit (TER) with an internal template for repeat synthesis⁶. Human telomerase activation in embryogenesis and its repression in somatic tissues govern cellular renewal capacity, with telomerase deficiency imposing hematopoietic and epithelial failures and aberrant telomerase activation enabling tumorigenesis⁷.

Despite its medical relevance, efforts to design drugs targeting telomerase are hampered by limited structural information. Endogenous human telomerase holoenzyme is scarce. Most studies of human telomerase use cellular overexpression of limiting TER (hTR in human) and TERT⁸. Two hTR domains are critical for activity^9,10: a domain with the template and adjacent pseudoknot (PK, together t/PK) and the conserved regions 4 and 5 (CR4/5) consisting of a branched junction of stems P5, P6, and the activity-critical stem-loop P6.1 (Fig. 1a). Together with TERT, they are sufficient to reconstitute telomerase activity with the repeat addition processivity characteristic of cellular holoenzyme¹¹. TERT is composed of four domains: the N-terminal (TEN) domain, the high-affinity RNA binding domain (TRBD), the reverse transcriptase domain (RT), and a C-terminal extension (CTE) analogous to a polymerase thumb¹¹ (Fig. 1a). The high-resolution structure of a streamlined TERT from the flour beetle Tribolium castaneum, which lacks the TEN domain, established that the latter three domains form a ring, referred to as the TERT ring¹². The TERT ring alone can bind a template-primer duplex¹³, and, accordingly, the human TERT ring has been shown to support single-repeat synthesis¹⁴. Purified or overexpressed hTR and TERT form heterogeneous complexes, only some of which are catalytically active¹⁵. It remains controversial whether active enzyme requires an hTR and TERT dimer^16,17 or only a monomer of each subunit^18,15. The landmark 9 Å cryo-electron microscopy (cryo-EM) structure of the ciliate Tetrahymena thermophila telomerase holoenzyme revealed its overall architecture, including a monomeric TERT-TER catalytic core¹⁹. However, the subunit composition of Tetrahymena telomerase holoenzyme is distinct from its human counterpart, and available structural information on human telomerase holoenzyme is limited to a 30 Å negative-stain EM reconstruction¹⁷. Therefore, both structure and composition of human telomerase holoenzyme remain poorly characterized.

Figure 1 |. Telomerase holoenzyme reconstitution and characterization.

a, Domain architecture of TERT (top) and secondary structure of hTR. Paired stems (P) are shown compacted in length. b, Silver-stained SDS-PAGE gel showing fractionation of purified, heterogeneously active TERT RNP. Proteins were detected by mass spectrometry and immunoblotting (Extended Data Fig. 1a and Extended Data Table 1). c, In vitro telomerase assays performed on the three elution fractions shown in b, the beads after elution, and five-fold diluted E1. A 12 nucleotide (nt) oligo was used as recovery control (RC). Processive repeat additions are numbered. d, e, Representative negative-stain 2D class averages for fractions E1 and E2, respectively. We also observed a small fraction of E2-like particles in E1 (data not shown), while E2 contained predominantly the particles shown in e. Experiments in b and c were performed three times and twice, respectively, with similar results. For gel source data, see Supplementary Figure 1.

Telomerase assembly initiates in human cells with nascent hTR binding to H/ACA proteins and their chaperones²⁰. Human H/ACA proteins are shared by telomerase and the small nucleolar (sno) and small Cajal body (sca) RNP families that catalyze ribosomal and spliceosomal RNA modifications^21,22. Eukaryotic H/ACA snoRNPs contain the pseudouridine synthase dyskerin (Cbf5), NOP10, NHP2, and GAR1, assembled on each of two hairpin stems; and sca RNPs also contain TCAB1/WDR79 bound to loop CAB-box motifs. The hTR H/ACA 3’ hairpin loop has a CAB box but the 5’ hairpin instead extends into CR4/5 (Fig. 1a). All eukaryotic H/ACA RNPs, including telomerase, require both hairpins of the H/ACA motif for RNP biogenesis in cells²², unlike their single-hairpin archaeal counterparts²¹, but it remains controversial whether active human telomerase holoenzyme has one or two sets of H/ACA proteins¹⁸, only dyskerin²³, or only dyskerin and NOP10 (ref. 17). Syndromes of human telomerase deficiency have been traced to mutations in dyskerin, NOP10, NHP2 and their chaperone NAF1⁵. While structure of the related single-hairpin archaeal RNP is known²⁴, there is no high-resolution structure of any complete eukaryotic H/ACA RNP.

Here, to address the structure and composition of human telomerase holoenzyme, we optimized active telomerase purification and used cryo-EM to determine its structure at subnanometer resolution, which allowed us to fit available high-resolution structures and homology models of all components. Our structure reveals in detail the organization of 10 protein subunits and hTR, illuminating the structural basis of hTR motif functions and human disease mutation causes of telomerase deficiency.

Different activities for distinct structural states of purified human telomerase

We reconstituted human telomerase holoenzyme by transient transfection of HEK 293T cells with vectors expressing TERT and hTR⁸. After affinity purification steps to enrich for hTR and TERT, the predominant additional proteins in the sample were TCAB1 and the H/ACA proteins (dyskerin, NOP10, NHP2 and GAR1), each of which was assigned by immunoblotting and, excepting glycine-arginine rich GAR1, also confirmed by mass spectrometry (Fig. 1b, Extended Data Fig. 1a, Extended Data Table 1). Furthermore, protein identities were confirmed by subunit drop-out purifications (see below). Direct primer-extension assays of eluted fractions showed that the amount of TERT did not fully correlate with the amount of telomerase activity; also, dilution of the less active fraction E1 increased rather than decreased activity, (Fig. 1c). Visualization by negative-stain EM of E1 and E2, which we refer to as inactive and active fractions, respectively, revealed morphologically distinct populations of particles. Particles from the inactive fraction were more elongated (typically 400 Å or more in length) and more heterogeneous than those in the active fraction (Fig. 1d and e). Particles from the active fraction consisted of two asymmetric lobes, nearly 300 Å in length (Fig. 1e). Previous studies have shown that cellular human telomerase reconstitution yields complexes both monomeric and dimeric for TERT^15,17, explaining the observed particle heterogeneity. For cryo-EM studies, we modified our purification protocol to recover only active fractions (Extended Data Fig. 1b and c), added a DNA substrate (T₁₄AG₃) during purification, and confirmed the presence of the bound substrate in the purified RNP (Extended Data Fig. 1c). We also demonstrated that our tagged TERT was active in vivo (Extended Data Fig. 2a-e).

Overall architecture and flexibility of human telomerase

We prepared ΔTCAB1 telomerase with a hTR CAB box mutant that disrupted TCAB1 binding^25,26 and TERT-hTRmin^27,28, in which hTRmin only contains the activity-essential t/PK and CR4/5 domains of hTR. By comparing their negative-stain 2D class averages to those of intact holoenzyme, we established the particle regions corresponding to TCAB1, the H/ACA RNA motif and proteins, and TERT with the two activity-essential domains of hTR (Extended Data Fig. 1d-h). This revealed that one lobe of the holoenzyme contained TERT and its associated hTR motifs (henceforth the catalytic core) and the other contained H/ACA RNP components and TCAB1 (henceforth the H/ACA lobe). We next collected cryo-EM data to determine the structure of the substrate-bound human telomerase holoenzyme (Extended Data Fig. 3a and b, Extended Data Table 2a). Initial image processing revealed extensive conformational flexibility between the two lobes, as well as within each lobe, which limited the quality of the overall reconstruction (Extended Data Fig. 3c and 4a). We performed focused classification with signal subtraction²⁹ to obtain more homogeneous subsets of particles for each lobe separately. This procedure yielded reconstructions at 7.7 Å and 8.2 Å resolution for the catalytic core and H/ACA lobes, respectively (Extended Data Fig. 3c, 4b-e). At these resolutions, densities for protein α-helices, β-barrels, and double-stranded RNA are discernible, allowing us to unambiguously fit available protein and RNA structures or homology models, and ultimately account for the majority of the density, except for flexible regions of single-stranded RNA and protein extensions (Fig. 2a, 2b and Extended Data Fig. 4f). We also obtained a reconstruction of the entire holoenzyme at 10.2 Å resolution (Extended Data Fig. 3c).

Figure 2 |. Cryo-EM structure of the substrate-bound human telomerase holoenzyme.

a, Schematic of subunit arrangements. b, Front (left panel) and back (right panel) views of the cryo-EM reconstructions for the H/ACA lobe at 8.2 Å and the catalytic core at 7.7 Å, with fitted subunits color-coded as indicated.

Subunit distribution across the two lobes of human telomerase

The bilobal human telomerase includes one TERT molecule and one hTR (Fig. 2a and b), in agreement with suggestions of an evolutionarily conserved single-TERT catalytic core for telomerases from ciliate and yeast model systems^30,31 to human^15,18,32. The complex also contains one TCAB1 and two sets of the four mature H/ACA RNP proteins. The previous human telomerase negative-stain EM reconstruction also had a bilobal architecture, interpreted as dimeric TERT, although gold-labeling experiments indicated the presence of a mixture of RNPs containing both one (50%) and two (36.5%) TERT molecules¹⁷. Incomplete separation of active from inactive TERT assemblies may account for the previous study mixture of complexes. Our finding of separate lobes for the catalytic core and the H/ACA RNP gives a structural explanation for why telomerase holoenzyme RNP biogenesis strategies have such plasticity across eukaryotes¹¹.

The extended architecture of hTR scaffolds the overall subunit organization across both lobes (Fig. 3a and b). The catalytic core and H/ACA lobes are bridged by stems P1a and P4.2 (Fig. 2a, 2b and 3b). The crystal structure of Tribolium TERT in complex with an RNA-DNA duplex¹³ could be readily fitted within the catalytic core density (Fig. 4a; Extended Data Fig. 5c, 5d and 6b). As the Oryzias latipes (medaka) TRBD structure³³ includes vertebrate TERT motifs not present in the streamlined Tribolium TERT (Extended Data Fig. 7e), we removed extensions from the medaka TRBD structure that did not fit our density and used this model to replace the Tribolium TRBD (Extended Data Fig. 5b). Adjacent to the TERT ring, there is globular density with approximately the dimensions of the Tetrahymena TEN domain crystal structure³⁴ (Fig. 4b, Extended Data Fig. 5a). The Tetrahymena and human TEN domains share only 20% sequence identity and have differences in predicted secondary structure³⁵ (Extended Data Fig. 6a); thus we removed regions of the former that are likely to be less structurally congruent with the human structure for tentative fitting into our map. The NMR structure for the human PK³⁶ and the crystal structure of the medaka CR4/5 in the conformation bound to TRBD³³ were fitted in one side of the catalytic core (Fig. 2b, 3a, 3b, 4a, and Extended Data Fig. 5h). The PK (P3+P2b) is connected to the template region located in the TERT active site by a bent helical RNA density that we attributed to J2a/b-P2a-J2a/a.1-P2a.1 (ref. 10, 37, 38) (Fig. 4a).

Figure 3 |. hTR structure in human telomerase holoenzyme.

a, Schematic of secondary structure of hTR, with domains arranged based on the cryo-EM reconstruction. Regions modeled are highlighted with soft-colored background. b, Front and back views of the structure of hTR highlighted within the human telomerase holoenzyme structure, with domains color-coded as in a and unmodelled connections shown as dashes.

Figure 4 |. Structure of the catalytic core.

a, Front (left panel) and back (right panel) views of the catalytic core. Domains of human TERT and hTR are color-coded as in Fig. 1a. hTR is in semi-transparent space-filling representation, and base-triples within the PK are indicated in blue. b, Route of single-stranded RNA connecting hTR P2a.1 and the template, which threads near the TEN domain. c, TERT interactions with the substrate-template duplex. Active site residues are shown as blue spheres. The human TERT IFD insertion missing in the Tribolium TERT is indicated between helices α10 and α11 of the Tribolium TERT¹³ (Extended Data Fig. 6b). A dotted line depicts the linker connection of TEN and TRBD domains. d, The human TRBD and CTE domains are encircled by hTR P2 (yellow) and PK (orange) and CR4/5 (wheat) domains. e, f, Architecture of Tetrahymena TERT domains with TER motif colors as indicated¹⁹: PK, orange; template recognition element (TRE), yellow; SL2, dark grey; and SL4, wheat. Base-triples within the PK are indicated in blue. For clarity, domains of TER colored in light grey in f are not shown in the structure in e. g, The Tetrahymena TRBD and CTE domains are encircled by t/PK (orange), TRE (yellow), SL2 (grey) and part of SL4 (wheat). Base-triples with the PK are indicated in blue.

We docked two copies of the crystal structure of an archaeal H/ACA RNP²⁴, each consisting of Cbf5 (orthologous to dyskerin), GAR1, NOP10 and L7Ae (structurally related to NHP2) and a single-hairpin RNA, into the H/ACA lobe (Fig. 2a-c, 5a, 5b and Extended Data Fig. 5e and 5f, 7f, 8a-d). The single-hairpin RNA was truncated to a 9 bp stem flanked by the ACA motif to mimic P4 and P7 stems flanked by box H and ACA, respectively, in hTR. The hTR segments bound by each archaeal RNP equivalent can be unambiguously assigned based on their connectivity with the rest of the RNA densities. The P4-P4.1 stem is connected to the CR4/5 domain in the catalytic core via the P4.2 stem, while P7 is connected to the P8 stem-loop (Fig. 3a, 3b, 5a and 5b and Extended Data Fig. 5i). Density in the regions of P1, P4.1 and P4.2 was fitted with A-form RNA duplexes. TCAB1 harbors a WD40 domain, and its homology model fit uniquely at the top of the H/ACA lobe (Fig. 2b, 5a and 5b and Extended Data Fig. 5g and 7g), consistent with the missing density from hTR CAB-box mutation (Extended Data Fig. 1h). This assignment of TCAB1 places it adjacent to an RNA-hairpin-like density that was fitted with the NMR structure of the P8 stem-loop³⁹.

Figure 5 |. The H/ACA domain and disease mutations.

a, Front and back views of the H/ACA lobe within the human telomerase structure, with color-coded subunits: TCAB1, yellow; dyskerin, blue; GAR1, red; NOP10, orange; NHP2, magenta; hTR, black. To distinguish the two sets of the H/ACA proteins, the first set bound to the 5’ hairpin (P4 stem) is in lighter shade. b, Schematics of subunit arrangements within the H/ACA lobe. c, Interactions of TCAB1 with hTR and H/ACA proteins. The backbone amides of disease-associated mutations in dyskerin, NOP10 and NHP2 that mapped near TCAB1 and P8 interaction surfaces are highlighted as spheres. d, Mapping of a cluster of disease mutations (backbone amides shown as spheres) in dyskerin near the dyskerin-dyskerin and dyskerin-RNA interfaces.

The catalytic core

The t/PK and CR4/5 domains of hTR wrap around TERT to form the catalytic core (Fig. 4a). In turn, the human TERT ring encircles the fitted Tribolium TERT RNA-DNA bound to the TERT active site (Fig. 4a and 4c), which shifts the template position compared to that in the substrate-free Tetrahymena telomerase holoenzyme (Extended Data Fig. 7i). The majority of the TERT RNA binding surface is contributed by the TRBD and CTE, which are sandwiched between the PK (P2b-P3) and CR4/5 (Fig. 4d). The human PK (P2b-P3) is connected to P2a by the J2a/b bulge, and P2a connects to the less conserved helical extension P2a.1 before the transition to the single-stranded 3’-template-flanking region (Fig. 1a, 3a and 4a). The t/PK forms a rigid, arc-like structure (Fig. 1a and 4a), as predicted by modeling using NMR structures of its subdomains^10,36,38. The less conserved end of the PK P3 stem approaches the TRBD close to its interface with the CTE and co-axially stacks with P2b (Fig. 4d). The unexpectedly limited interaction between the hTR PK and TERT favors a model for indirect PK function in the co-folding of TERT and hTR^30,40. The location of P2a.1 positions the immediately 5’ single-stranded 3’-template-flanking RNA such that it could thread between the TEN domain and the TERT ring (Fig. 4b and Extended Data Fig. 7c), similar to the path of the 3’-template-flanking TER in the Tetrahymena telomerase holoenzyme ^9,10,19 (Fig. 4e), despite major changes in the remainder of t/PK secondary and tertiary structure (Fig. 1a and 4f and Extended Data Fig. 7j). The TEN domain proximity to the template 3’ end further reinforces its proposed role in stabilization of RNA-DNA duplex at the template 3’ end^14,27. The position of the Tetrahymena 5’ template-boundary element, stem-loop 2 (SL2), relative to the TRBD, is roughly similar to that of human P1b (Fig. 4d and g), consistent with their common function in 5’ template boundary determination⁴¹.

The CR4/5 domain, which consists of P5, P6 and P6.1 stems connected as a three-way junction, adopts a similar conformation to that in the medaka CR4/5-TRBD crystal structure³³ (Fig. 4d and Extended Data Fig. 7d), except that human P6 is longer and composed of two stems, P6a and P6b. The P6a stem binds along TRBD (Fig. 4d), while the P6.1 hairpin emanates from the three-way junction almost perpendicularly to P6a, inserting into the interface between the TRBD and CTE. Clear helical density is observed for P6b, which makes no RNA-RNA or RNA-protein interactions. P5 co-axially stacks with P6a, but like P6b, it does not interact with TERT (Fig. 4d and Extended Data Fig. 7d). The P6.1-TERT interaction is critical for TERT association with hTR and telomerase catalytic activity^42,43. The P6.1 apical loop was disordered in the TRBD-CR4/5 crystal structure³³ and, although our resolution is insufficient for de novo building, its density is visible in our cryo-EM map, appearing packed against the CTE (Extended Data Fig. 7d). Our structure suggests that interaction with the CTE stabilizes this loop, agreeing with previous crosslinking studies⁴⁴. In the Tetrahymena telomerase cryo-EM structure, the stem-terminus element (SL4) is bound at the interface between the TRBD and CTE of TERT¹⁹, similar to P6.1 in our human telomerase structure (Fig. 4d and 4g). Whether or not they are related evolutionarily, P6.1 and SL4 serve a similar structural role in telomerase catalytic core architecture. Finally, the catalytic core has extra density that likely corresponds to TERT and hTR regions that were not possible to model (Extended Data Fig. 4f), such as the “insertion in fingers” (IFD) subdomain of the RT domain (residues 734-802) that is missing in Tribolium TERT (Extended Data Fig. 6b, 7a and 7b), and the non-conserved flexible linker between the TEN domain and the TERT ring (Fig. 4c).

The H/ACA RNP and human disease mutations

Our structure offers the first glimpse of the subunit architecture of an intact eukaryotic H/ACA RNP, with two sets of H/ACA heterotetramers that bind two RNA hairpins (Fig. 5a and b). As expected, the 3’ hairpin loop associates with the single holoenzyme TCAB1 subunit (Fig. 5a-c). We observe an interaction between the two H/ACA protein heterotetramers, predominantly mediated by the two dyskerin molecules (Fig. 5d and Extended data Fig. 7h). The first set of H/ACA proteins contacts the 5’ hairpin P4 stem exclusively via dyskerin (Fig. 5a and b, Extended Data Fig. 5e). In contrast, the second set forms more extensive interactions with the 3’ hairpin P7 stem and P8 stem-loop. The P7 stem is bound by dyskerin, similarly to the 5’ hairpin P4, and continues to P8, which interacts with NOP10, NHP2 and additionally TCAB1 (Fig. 5a and b, Extended Data Fig. 5f and 5i). That binding of dyskerin at the base of the 5’ hairpin is sufficient for anchoring the entire core heterotetramer, and accounts for the evolutionary divergence of the vertebrate TER 5’ H/ACA hairpin⁴⁵ and for the hTR 5’ hairpin tolerance of changes in stem and pocket structure⁴⁶. Loss of hTR 5’ hairpin contacts to H/ACA proteins is compensated by an hTR-specific increase in protein binding to the 3’ hairpin¹⁸. The position of dyskerin defined by our structure explains why H/ACA RNP subunit exchange occurs in cell extracts for GAR1, NOP10 and NHP2, but not dyskerin⁴⁷. The surprisingly limited protein-RNA interaction of the hTR 5’ hairpin implies that a wider breadth of RNA structures can assemble H/ACA proteins than has been predicted from the snoRNAs and scaRNAs, which conserve not only H/ACA protein binding but also requirements for dyskerin catalytic function²¹.

The single subunit of TCAB1 in human telomerase contacts both the 3’ hairpin CAB box and dyskerin in the second set of H/ACA proteins (Fig. 5c; Extended Data Fig. 7g), giving a unifying explanation for its simultaneous identification as an RNA-independent dyskerin binding protein and a sequence-specific, direct RNA binding protein^48,49. Unexpectedly, TCAB1 also contacts GAR1 (Fig. 5c; Extended Data Fig. 7g). Protein-protein interactions by TCAB1 account for why such a limited amount of CAB-box sequence can stabilize its association with H/ACA RNPs. Structure fitting of the archaeal H/ACA RNP, combined with sequence homology between the archaeal and human proteins, allowed mapping of human dyskeratosis congenita and Hoyerall-Hreidarsson disease mutations in our structure⁵⁰ (Extended Data Fig. 8a-d). Interestingly, a large number of dyskerin mutations cluster at the dyskerin-dyskerin interface, which is also close to its RNA binding surface (Fig. 5d; Extended Data Fig. 7f and 7h). Additionally, dyskerin R158 is near TCAB1 and NOP10 R34 and NHP2 V126 are located near the P8 stem (Fig. 5c). Mutations at any of these newly evident interfaces would be expected to have more severe impact on hTR than snoRNAs or scaRNAs because (a) crippled protein-RNA interaction of the hTR 5’ hairpin makes 5’ hairpin assembly more dependent on cross-hairpin dyskerin-dyskerin interactions, (b) hTR is uniquely reliant on enhanced H/ACA-protein affinity for the 3’-hairpin P8 stem-loop, and (c) hTR has one rather than two CAB box locations for TCAB1 association^18,46. Our ability to map disease mutations to H/ACA RNP structure expands the scope of telomerase deficiency mechanisms beyond decreased assembly of core heterotrimer (dyskerin, NOP10, NHP2) (ref. 22) to include decreased dyskerin interaction with itself and with TCAB1 as well as with hTR.

Conclusions

The structure presented here provides the first architectural characterization of a telomerase holoenzyme from a multicellular species, addressing the longstanding question of vertebrate telomerase holoenzyme subunit content and arrangement. Our structure opens new opportunities for the design and screening of inhibitors targeting hTR folding and TERT interaction that will hold promise as general anti-cancer therapeutics⁷.

Methods

Telomerase reconstitution

Human telomerase was reconstituted in cells with the TERT expression plasmid pcDNA3.1-ZZ-Tev-TwinStrep-TERT and the hTR expression plasmid pcDNA3.1-U3-hTR-HDV. HDV is the Hepatitis Delta Virus ribozyme, which was previously shown to increase hTR accumulation^46,28. Initially we used suspension HEK 293 cells lacking N-acetylglucosaminyltransferase I (GnTI)⁵¹ and transfected the cells using polyethylenimine (PEI)⁵². These cells were cultured in FreeStyle 293 Expression medium (ThermoFisher). After 48 hours of transfection, whole cell-extract was prepared by CHAPS lysis⁵³. We obtained populations of inactive and active telomerase RNP purified from these extracts. To enrich for the active telomerase RNP, we used adherent HEK 293T cultured in DMEM with GlutaMAX (ThermoFisher) supplemented with 10% FBS, 100 units/mL penicillin and 100 μg/ml Streptomycin. The cells were transfected with TERT and hTR expression plasmids by calcium phosphate. After 48 hours, the cells were harvested and resuspended in hypotonic lysis buffer (HLB) (20 mM HEPES NaOH pH 8, 2 mM MgCl₂, 0.2 mM EGTA, 10% glycerol, 0.1% NP40, 1 mM DTT and 0.1 mM PMSF). Whole-cell extract was prepared by three freeze-thaw cycles and adjusted to 300 mM before being cleared by centrifugation. The clarified extract was adjusted to 150 mM NaCl. For ΔTCAB1 telomerase and TERT-hTRmin, we used a previously characterized CAB-box mutant hTR (G414C)²⁵ and LhTRmin²⁸. HEK 293 cell lines are long-term lab stocks and had the expected morphology and growth. They have not been authenticated or tested for mycoplasma recently.

Telomerase purification

The prepared whole-cell extract (from 120 plates of adherent cells or 6L of suspension cells) was incubated with streptavidin agarose resin (Sigma-Aldrich) pre-bound to a 5’-biotinylated oligonucleotide¹⁵ at room temperature for 3 hours. The resin was washed with wash buffer (20 mM HEPES NaOH pH 8.0, 150 mM NaCl, 2 mM MgCl₂, 0.2 mM EGTA, 10% glycerol, 0.1% Igepal CA-630, 1 mM DTT) and eluted with a competitor oligonucleotide¹⁵. The eluate was subsequently incubated with MagStrep XT resin (IBA LifeSciences) for 2 hours at 4°C. The resin was washed with wash buffer and eluted in batch with biotin elution buffer (100 mM Tris HCl pH 8.0, 150 mM NaCl, 1 mM EDTA, 5-10 mM biotin, 2 mM MgCl₂, 0.1% Igepal CA-630, 10% glycerol, 1 mM DTT). We collected three sequential batch elution fractions for which the elution buffer was incubated with the resin for 30 minutes each time. For mass spectrometry, the eluate was combined and precipitated using trichloroacetic acid (TCA). The pellet was washed extensively with acetone and resuspended in water. The sample was subjected by MudPIT to identify the protein components present in the sample⁵⁴. For cryo-EM studies, the final eluate was concentrated and buffer-exchanged with cryo-EM buffer (20 mM HEPES NaOH pH 8.0, 150 mM NaCl, 2 mM MgCl₂, 0.05% Igepal CA-630, 1% trehalose, 1 mM DTT). To prepare DNA-substrate bound telomerase, oligonucleotide T₁₄AG₃ (1 μM) was added in the MagStrep binding step, and excess DNA substrate was washed away. Substrate-bound telomerase was eluted as described above.

Immunoblotting

The purified telomerase samples (E1 and E2) from the CHAPS lysis protocol were resolved by bis-Tris SDS-PAGE. Proteins were transferred to a nitrocellulose membrane and blocked with 4% nonfat milk (Carnation) in TBS buffer (50 mM Tris pH 7.5, 150 mM NaCl) for 1 hour at room-temperature. The membranes were incubated with primary antibodies overnight at 4°C and washed with TBS before being probed with secondary antibodies (Invitrogen) in 4% nonfat milk in TBS for 1 hour at room-temperature. We blotted for TERT, TCAB1, dyskerin and GAR1 on the same membrane, and NHP2 and NOP10 on a different membrane. The small sizes of NHP2 and NOP10 required a shorter protein transfer time than the other proteins. The membranes were washed extensively with TBS and visualized on a LI-COR Odyssey imager. The primary antibodies used were rabbit anti-dyskerin (Santa Cruz Biotechnology), mouse anti-TCAB1 (Sigma), rabbit anti-GAR1 (Novus), rabbit anti-NHP2 (Proteintech), rabbit anti-NOP10 (Abcam), mouse anti-Strep (Abcam), mouse anti-tubulin (Abcam) and rabbit IgG (Sigma-Aldrich).

Direct telomerase activity assays

Direct primer extension assays were performed using 1 μl of sample in a 20 μl reaction volume containing 50 mM Tris-acetate pH 8.0, 4 mM MgCl₂, 5 mM DTT, 250 μM dTTP, 250 μM dATP, 5 μM unlabeled dGTP, 0.1 μM α−³²P dGTP (3000 Ci/mmole, 10 mCi/ml, Perkin-Elmer), 500 nM 5’-(T₂AG₃)₃-3’ primer unless primer was pre-bound. Reactions were incubated at 30°C for 40 min and stopped with TES buffer (50 mM Tris HCl pH 7.5, 20 mM EDTA, 0.2% SDS). The products were extracted and precipitated together with a 12-nt ³²P-end-labeled oligonucleotide as a recovery control and resolved on a denaturing polyacrylamide gel. The dried gels were exposed to a phosphorimager screen and imaged on a Typhoon Trio system (GE Healthcare).

HCT116 cell culture and genome editing

HCT116 cells were cultured in DMEM with GlutaMax (ThermoFisher) supplemented with 10% FBS and 100 μg/ml Primocin (Invivogen). Clonal cell lines with homozygous TERT disruption were generated previously²⁸. Transgene integration at the AAVS1 safe harbor locus was conducted as previously described⁵⁵ using CAGGS promoter for TERT expression and a neomycin resistance cassette for selection. Genome engineering in HCT116 cells was performed using the manufacturer’s transfection protocol (Lipofectamine 3000, Thermo) with media exchange at 24 hours into selection with 200 μg/ml of G418 and 100 μg/ml of hygromycin. Cells were passaged continuously with selection media for >3 months after selection for cells with the integrated TERT transgenes. HCT116 cells were obtained from Molecular and Cell Biology Department Tissue Culture Facility (UC Berkeley) and were tested for mycoplasma.

Telomeric repeat amplification assays

Cell extract was prepared using the HLB method as described above and normalized to 2 mg/ml, which was quantified by the Bio-Rad Bradford protein assay. Dilutions were made of the whole cell extract, which were used for the PCR-based telomeric repeat amplification protocol (TRAP) as previously described⁵⁵. Two μl with 400 ng total protein was used per 20 μl QTRAP reaction, consisting of 0.1 μg/μl TS primer (5’-AATCCGTCGAGCAGAGTT-3’), 0.1 μg/μl ACX primer (5’-GCGCGGCTTACCCTTACCCTTACCCTAACC-3’), and iTaq Universal Green Supermix (BioRad). Samples were incubated on a CFX96 Touch Real-Time PCR Detection System (Bio-Rad, Hercules, CA) at 30°C for 30 min, followed by a hot start of 95°C for 2 min. The samples were then cycled 35 times between 95°C for 20 seconds and 61°C for 90 seconds. Relative telomerase activity was calculated by a ΔCt normalized to the parental sample. Serial dilutions of 10, 30, and 100 ng were used for the hotTRAP protocol. The TS and ACX primers were used to amplify telomeric repeats labeled by incorporation of α−³²P-dGTP. TSNT (5’-AATCCGTCGAGCAGAGTTAAAAGGCCGAGAAGCGAT-3’) was used as the internal control (IC) for all samples, and NT (5’- ATCGCTTCTCGGCCTTTT-3’) was the dedicated TSNT reverse primer. Samples were resolved on a native gel. The gel was dried, exposed on a phosphorimager screen and imaged on a Typhoon scanner (GE Healthcare).

Southern blotting

Genomic DNA preparation was conducted as previously described²⁸. Four-8 ug of DNA was digested 8 hours to overnight with AluI and MboI at 37°C before electrophoresis on a 0.7% agarose gel (Seakem ME agarose). The gel was dried and denatured in 1.5 M NaCl and 0.5 M NaOH for 1 hour at 50°C. The gel was then washed twice with 4X SSC + 0.1% SDS before prehybridization with Church’s buffer (1% BSA, 1 mM EDTA, 0.5 M Na₃PO₄ pH 7.2, 7% SDS) for 30 minutes at 50°C. ³²P-end-labeled probes were made of the telomeric repeat (T₂AG₃)₃ as well as the O’Generuler 1 kb plus ladder (Thermo). These probes were both added and hybridized overnight at 50°C. The gel was washed with 4X SSC + 0.1% SDS at 40°C before exposing on a phosphorimager screen and imaging on a Typhoon scanner (GE Healthcare).

Negative-stain electron microscopy and data processing

For negative-stain grid preparation, 4 μL of telomerase sample was incubated on glow-discharged 400-mesh copper grids, which had been previously coated with a homemade carbon film on nitrocellulose, for 90 s and stained with 2% w/v uranyl formate. Micrographs for the inactive and active fractions of telomerase were collected on an FEI Tecnai 12 transmission electron microscope operated at 120 kV and equipped with a TVIPS TemCam F416. Data was collected using the Leginon package⁵⁶ and data processing was done in RELION 1.4 (ref. 57) unless otherwise indicated. Initial particle picking of ~1,500 particles was performed manually, particles were extracted with a 220² pixel box at a pixel size of 2.18 Å/pixel and subjected to reference-free 2D classification to obtain 2D initial references for auto-picking within RELION⁵⁸. A total of 51,423 and 26,350 particles were picked for the inactive and active fractions, respectively. We performed two rounds of reference-free 2D classification for each dataset.

Micrographs for the enriched active fraction of intact holoenzyme, ΔTCAB1 telomerase, and TERT-hTRmin samples were collected on an FEI Tecnai F20 transmission electron microscope operated at 120 kV and equipped with a Gatan US4000 CCD camera. Data collection was done using the Leginon software package⁵⁶. Initial particle picking for intact telomerase holoenzyme was done using DOG PICKER⁵⁹ within the APPION pipeline⁶⁰. This yielded approximately 16,000 particles, which were extracted using a 400² pixel box at a pixel size of 1.5 Å/pixel and subjected to reference-free 2D classification to obtain initial 2D class averages. These 2D class averages were subsequently used as references for automatic picking within RELION⁵⁸ to yield 15,293 and 23,922 particles for intact telomerase holoenzyme and ΔTCAB1 mutant, respectively. Reference-free 2D classification was again performed on these particles. For TERT-hTRmin complex, which is a much smaller RNP than telomerase holoenzyme, DOG PICKER was initially used to pick approximately 48,000 particles, which were extracted using a 180² pixel box at a pixel size of 1.5 Å/pixel. 2D class averages resulting from reference-free 2D classification of these particles were used as references for automatic picking in RELION to give 50,720 particles, which were subjected to another round of reference-free 2D classification. A comparison of the 2D class averages of intact telomerase holoenzyme, ΔTCAB1 mutant and TERT-hTRmin is shown in Extended Data Fig. 1e-h.

Cryo-EM electron microscopy

For cryo-EM analysis, 3 μl of the purified telomerase was applied to C-flat CF 4/2 grids (Protochips) that had been previously coated with a 6-nm-thick layer of homemade continuous carbon film and glow-discharged in amylamine⁶¹ to overcome the preferred orientation of the telomerase holoenzyme on untreated carbon film. The grids were blotted for 4-5 s at 100% humidity and 4°C and plunged into a mixture of liquid ethane and propane cooled by liquid nitrogen⁶² using an FEI Vitrobot MK IV. The grids were loaded onto an FEI Titan Krios transmission electron microscope operated at 300 kV and equipped with a Gatan K2 Summit direct electron detector camera mounted behind a GIF Quantum energy filter. Images were collected automatically using the Serial-EM package⁶³ in super-resolution counting mode at a calibrated magnification of 43477x (physical pixel size of 1.15 Å/pixel), with a total electron dose of 42 electrons per Ų during a total exposure time of 7 s, dose-fractionated into 28 movie frames. We used a slit width of 25 eV on the energy filter and a defocus range of 1.5-3.5 μm. A total of 11,654 micrographs were collected from two separate data collection sessions.

Image processing

Most steps of data processing were done in RELION 2.0 (ref. 64) unless otherwise stated (Extended Data Fig. 3c). The movie stacks for each micrograph were corrected for drift and dose-weighted using MOTIONCOR2 (ref. 65) running within Focus⁶⁶ during data collection. Contrast transfer function (CTF) parameters were estimated for the drift-corrected micrographs using GCTF⁶⁷. Initial particle picking was performed on a subset of 350 micrographs using Gautomatch (obtained from Kai Zhang, MRC-LMB, Cambridge) and templates from a previous dataset collected on substrate-free telomerase at a different magnification (data not used and not shown in this study), resulting in approximately 32,000 particles. These particles were extracted with a 400² pixel box for reference-free 2D classification to obtain 2D references for automatic picking of all micrographs by Gautomatch. A total of 1,091,177 particles from 11,450 micrographs were picked, binned by 2 and extracted with a box size of 200² pixel. The data were initially processed in two batches, one for each data collection session. 3D classification into five classes was run for 30 iterations with an angular sampling of 7.5°, a regularization parameter T of 4 and a 60 Å-low-pass filtered initial model obtained from the previous dataset of substrate-free telomerase (data not used and not shown in this study). The initial model used for the substrate-free telomerase was that of the published 30 Å negative stain reconstruction of human telomerase¹⁷. For dataset 1, a subset of 121,116 particles from one class with the best features was selected and un-binned. For dataset 2, we selected two 3D classes and subjected them to one round of reference-free 2D classification to remove more particle images showing contaminants or damaged telomerase complexes. A subset of 214,157 particles from this dataset was unbinned and combined with the subset of particles selected from dataset 1. The combined subset of 335,283 particles was refined and yielded a reconstruction that was hard to interpret due to the conformational heterogeneity between the two lobes and within each lobe. The angular assignments resulting from this refinement were used for focused 3D classification with signal subtraction for each lobe to resolve the conformational heterogeneity within each lobe²⁹. The two lobes are henceforth referred to as the H/ACA lobe and the catalytic core, according to our subunit assignments using negative-stain EM (Extended Data Fig. 1e-h). The best class consisting of 103,363 particles for the catalytic lobe was refined to 7.8 Å resolution while that for the H/ACA lobe was refined to 8.8 Å resolution from 104,330 particles. These reconstructions show clear secondary structure features as expected for this resolution range. To further reduce conformational heterogeneity, we performed another round of alignment-free 3D classification, using the alignment parameters from the refinement run for each lobe, and refined the resulting best class. We obtained a 7.7 Å resolution reconstruction from 39,860 particles for the catalytic core and 8.2 Å resolution reconstruction from 36,210 particles for the H/ACA lobe. These reconstructions were used for model fitting (see below).

We also performed alignment-free 2D classification on the original (unsubtracted) particles using the orientations determined by the 3D refinement of each lobe to assess the relative orientation of the other lobe (Extended Data Fig. 4a). For both cases, the other lobe adopts a wide range of conformations relative to the lobe that is aligned, clearly showing that the quality of any reconstruction for the whole structure is limited by both the continuous movements between the two lobes relative to each other and the conformational heterogeneity within each lobe. To obtain a better reconstruction encompassing both lobes, we performed global 3D classification for the subset of 335,283 particles before signal subtraction (25 iterations, T=8, angular sampling of 7.5°) (Extended Data Fig. 3c). As expected for a particle population exhibiting continuous motion, it resulted in four classes with nearly equal distribution and the two lobes adopting different conformations relative to each other. We refined each of these classes and obtained 10.2 Å resolution for the best class.

All refinements were performed using fully independent data half-sets (gold-standard refinement) and resolutions are reported based on the Fourier shell correlation (FSC) = 0.143 criterion^68,69 (Extended Data Fig. 4b). FSC curves were calculated with a soft mask. For visualization, maps were corrected for the modulation transfer function of the detector and sharpened by applying a negative B-factor as determined by the post-processing function of RELION. Local resolution (Extended Data Fig. 4d and 4e) was calculated within RELION 2.0. For model versus map FSC curves calculations, we converted the catalytic core and H/ACA RNP models into density using EMAN⁷⁰. Due to small regions of unmodelled density in our maps (Extended Data Fig. 4f), we prepared a soft mask (6-pixel soft edge) from the model and extracted the cryo-EM maps of each model using this mask. FSC model versus map was calculated using Xmipp⁷¹ (Extended Data Fig. 4c).

Model fitting

Initial fitting of all X-ray structures, NMR ensembles and homology models was performed manually by visual inspection of the best maps of the individual two lobes, followed by fit optimization in Chimera⁷² (Extended Data Table 2b, Supplementary Data 1 and Supplementary Video 1). The fitted structure for each lobe was subsequently rigid-body fitted into the overall map resulting from refinement of the best 3D class from global 3D classification. A homology model for TCAB1 WD40 domain was obtained using Phyre⁷³ based on the structure of coatomer subunit alpha in the COPI coat linkage structure⁷⁴ (PDB 5A1V) and fitted into the density located by comparisons of the 2D class averages for WT and ΔTCAB1 telomerase (Extended Data Fig. 1e-h). The Tetrahymena TEN domain and the TRBD, RT and CTE domains of the Tribolium TERT¹³ (PDB 3KYL) were fitted by rigid-body fitting into the map separately. We compared the fittings of the Tribolium TRBD and the medaka TRBD (PDB 4O26) (Extended Data Fig. 7e). The former has a truncated TRBD, while the latter is closely related to the human TRBD in sequence. Some of the medaka TRBD extensions close to the RNA binding surface fit our map, while those in the periphery of the domain (including residues 403-425 and residues 545-572) did not. We removed extensions that did not fit from the medaka TRBD and replace the Tribolium TRBD with this truncated version. Our substrate can form a 6bp duplex with hTR template region. Thus we truncated the DNA/RNA duplex model in the duplex-bound Tribolium TERT (PDB 3KYL) to 6 bp. Overall, the relative orientations of the domains and the DNA/RNA duplex are very similar to that of the crystal structure. For the H/ACA RNP, the RNA used in the single-hairpin archaeal crystal structure (PDB 2HVY) was truncated to a 9 bp hairpin flanked by the 3’ ACA motif. We used this model to fit both H/ACA copies because no structure of H/ACA proteins bound to the H box is available. Fitted structures of available hTR domains include the human P2b-P3 pseudoknot³⁶ (PDB 2K95), P2a-J2a/b-P2b³⁷ (PDB 2L3E), P2a.1 (ref. 38), P8 stem (or CR7) (ref. 39) (PDB 2QH2), and the medaka TRBD-bound CR4/5 (ref. 33) (PDB 4O26). The P4 and P7 stems bound by the H/ACA proteins were adapted from the truncated archaeal hairpin RNA model, as mentioned above. We used COOT⁷⁵ to place idealized A-form RNA helices in the map regions assigned to P1, P4.2, P4.2 and P6b stems.

Map and model visualization

Maps were visualized in Chimera⁷² and all model illustrations were prepared using either Pymol (www.pymol.org) or Chimera.

Extended Data

Extended Data Figure 1 |. Protein identification by immunoblotting, enriching active telomerase, substrate pre-binding, and comparison of wild-type (WT), ΔTCAB1, and TERT-hTRmin RNPs.

a, Immunoblotting of TERT, TCAB1, dyskerin, GAR1, NHP2 and NOP10 in telomerase purified after CHAPS lysis protocol as shown in Fig. 1b. We used primary antibodies against each protein, except ZZ-SS-TERT, for which we used rabbit IgG. Due to the wide range of the molecular weights of the proteins in our sample, TERT, TCAB1, dyskerin and GAR1 were detected in one blot, while NHP2 and NOP10 were detected in a separate blot. The use of the same sample to probe all proteins was performed only once, but TERT, dyskerin and TCAB1 were also probed individually twice. b, Silver-stained SDS-PAGE gel of purified telomerase fractions obtained from adherent cells lysed using the hypotonic lysis method that enriches active telomerase. This experiment was repeated over five times with similar results. c, Direct primer-extension assays of the purified telomerase fractions shown in b, confirming that E1 is no longer inactive (left panel), and of the substrate-bound purified telomerase fractions with additional DNA substrate omitted from the assays (right panel). The activity observed confirmed that purified telomerase contains the DNA substrate. The activity assays with substrate added were repeated over five times and the activity assays with substrate pre-bound were repeated twice. All repeats showed similar results. d, Silver-stained SDS-PAGE gel of purified intact and ΔTCAB1 telomerase and TERT-hTRmin telomerase prepared for subunit assignments. This experiment was done only once to provide a direct comparison between these different purified telomerase complexes. e, f, g, Negative-stained 2D class averages of intact and ΔTCAB1 telomerase and TERT-hTRmin, respectively. h, Comparison of representative 2D class averages intact and ΔTCAB1 and TERT-hTRmin showing the inferred localization of TCAB1 and TERT. For gel source data, see Supplementary Figure 1.

Extended Data Figure 2 |. Cellular function of the tagged TERT used for structural analysis.

a, Western blot detection of ZZ-SS-TERT in TERT knock-out (KO) cells rescued by untagged TERT or ZZ-SS-TERT expression. Whole-cell extracts were probed using Strep antibody. HCT116 is the parental cell line. Lysate prepared from HEK 293T cells transiently transfected with ZZ-SS-TERT and hTR was used as a positive control (Ctrl). Tubulin was detected as a loading control. This experiment was performed only once to confirm the success of ZZ-SS-TERT incorporation into the HCT116 TERT KO cells. b, Telomeric restriction fragment analysis of HCT116 parental cells, TERT KO cells (before senescence), and TERT KO cells rescued with untagged or ZZ-SS-TERT transgene. Transgene-expressing cells were sampled at 31, 62 and 98 days post-transfection with transgene vectors. This experiment was performed twice with similar results. c, TRAP assay detection of telomerase activity in HCT116 parental cells, TERT KO cells, and TERT KO cells rescued with untagged TERT or ZZ-SS-TERT transgene. Whole-cell extracts were normalized by total protein concentration and assayed at 100, 30 or 10 ng of total protein per reaction. IC is an internal control. This experiment was repeated four times with similar results. d, Quantification of Q-TRAP assay detection of telomerase activity in HCT parental cells, TERT KO cells and TERT KO cells rescued with untagged TERT or ZZ-SS-TERT transgene. Error bars were calculated by taking the standard deviation of the average ΔCt from four different time points. Data points were shown as overlays. e, Direct primer-extension assay of telomerase after template-complementary oligonucleotide purification from extracts of TERT KO cells rescued by untagged TERT or ZZ-SS-TERT transgene. Assays were performed on clarified cell lysate (crude), flow-through (O-FT) and elution (OE) using equivalent amounts of cell extract. This experiment was performed only once to re-confirm the results in c. For gel source data, see Supplementary Figure 1.

Extended Data Figure 3 |. Image processing procedures.

a, Representative raw micrograph. We collected a total of 11,654 micrographs for this study. b, Representative 2D class averages obtained from reference-free 2D classification. c, Data processing strategy used in this study.

Extended Data Figure 4 |. Resolution estimation and analysis of the flexibility of the complex.

a, Representative 2D class averages obtained from 2D classification without alignment of particles that were aligned on either the catalytic core or the H/ACA lobe. For both cases, the other lobe adopts a wide range of conformations, as illustrated by the blurriness of the density. b, FSC curves for the overall map and the maps of the catalytic core and H/ACA lobe resulting from focused classification with signal subtraction and gold-standard refinement. c, Model versus map FSC curves for the catalytic core and the H/ACA RNP. We fitted only homology models as rigid bodies into the map and did not perform model coordinate refinement due to the limited resolutions of the maps. Therefore, we used a lower FSC threshold of 0.25 for resolution estimates. d, e, Local resolution for the catalytic lobe (d) and the H/ACA lobe (e) estimated by RELION 2.0 (ref. 64). Most of the catalytic core is resolved at 6-8 Å while most of the H/ACA lobe is resolved at 7-9 Å. f, Front (left panel) and back (right panel) views of the reconstruction showing modeled (grey) and unmodelled (gold) density. Most of the unmodelled density corresponds to single stranded RNA regions or RNA bulges, and human protein extensions that cannot be built de novo at this resolution.

Extended Data Figure 5 |. Fittings of proteins and RNA into the cryo-EM map.

a-d, Domains of TERT. a, The TEN domain from Tetrahymena³⁴ (PDB 2B2A). b, The truncated medaka TRBD domain³³ (PDB 4O26). c, d, The RT and CTE domains from Tribolium¹³ (PDB 3KYL). e, Front (top) and back (bottom) views of the 5’ hairpin set of H/ACA proteins (dyskerin, red; GAR1, cyan; NOP10, wheat; NHP2, pink) bound to P4 stem (dark blue) fit by the archaeal H/ACA RNP²⁴ (PDB 2HVY). f, Front (top) and back (bottom) views of the 3’ hairpin set of H/ACA proteins using the same model and color scheme as e. g, Homology model of TCAB1 WD40 domain. h, Front (top) and bottom (bottom) views of hTR in the catalytic core. i, hTR in the H/ACA lobe.

Extended Data Figure 6 |. Sequence alignment of TERT with secondary structure assignments based on known structures.

a, Sequence alignment of Tetrahymena and human TEN domains. The secondary structure assignments of the Tetrahymena TEN domain³⁴ (PDB 2B2A) are shown above the aligned sequences. Regions removed prior to fitting are indicated with dashed lines below the sequences. b, Sequence alignment of the Tribolium, human and Tetrahymena TERT, with the latter two N-terminally truncated to match Tribolium. Secondary structure assignments of the Tribolium TERT are shown on top, with conserved motifs labeled in blue. Throughout the figure, the η symbol refers to a 3₁₀-helix. Strict β-turns and strict α-turns are displayed as TT and TTT. The three catalytic aspartic acids are indicated with black arrowheads. ESpript was used to generate this figure⁷⁶.

Extended Data Figure 7 |. Selected protein-protein and protein-RNA interactions in telomerase holoenzyme and comparisons between human and Tetrahymena TERT.

a, Interactions between the RT and CTE domains of TERT and the substrate-template duplex. The RT domain is divided into two subdomains, the palm (green) and fingers (orange) that are commonly observed in retroviral reverse transcriptases. The CTE (cyan) is the putative thumb. The IFD insertion that is missing in the Tribolium TERT is indicated. b, Region of the cryo-EM reconstruction shown in a. Unassigned density close to the IFD insertion is highlighted in magenta. c, Cryo-EM density of the TEN domain in the same view as that in Fig. 4b. Connecting density is observed between the template region and the P2a.1 stem. d, Map of the CR4/5 three-way junction (wheat) and the nearby TERT domains highlighting the position of the P6.1 loop near the interface of the CTE (cyan) and TRBD (blue) domains of TERT. This loop was not ordered in medaka CR4/5 bound to the TRBD alone³³. e, Comparison of the Tribolium (left panel) and medaka TRBD (right panel) with the medaka CR4/5 domain of hTR^13,33. Extensions of the medaka TRBD that did not fit the map were truncated for visualization. f, Cryo-EM map with H/ACA components fitted. Detailed views of regions boxed in f show TCAB1 interactions with dyskerin, GAR1 and the P8 stem-loop (g); and interactions between the two dyskerin molecules (h), where a cluster of DC mutations are found (Fig. 5d). i, Comparison of the human and Tetrahymena TERT superposed on the RT domain. Domains of human TERT are colored as in Fig. 1a, while Tetrahymena TERT is colored in grey. The bound human and Tetrahymena templates are colored in dark and light red, respectively. j, Comparison of human and Tetrahymena¹⁹ catalytic core fitted into the corresponding cryo-EM maps. Domains of TERT were colored as in Fig. 1a and TER is colored as yellow. We used the catalytic core and H/ACA lobe densities resulting from our focused classification/refinement for the human telomerase and the overall 9.4 Å Tetrahymena telomerase map (EMD-6442).

Extended Data Figure 8 |. Sequence alignments of H/ACA proteins with secondary structure assignments based on known structures.

a-d, Sequence alignments of Pyrococcus furiosus (archaeal) and human Cbf5/dyskerin (a), GAR1 (b), NOP10 (c), and L7Ae/NHP2 (d). Secondary structure assignments displayed on the top are from the archaeal H/ACA RNP structure²⁴ (PDB 2HVY). The η symbol refers to a 3₁₀-helix. Strict β-turns and strict α-turns are displayed as TT and TTT. Known human dyskeratosis congenita and Hoyeraal-Hreidarsson disease mutations⁵⁰ in H/ACA proteins are indicated with arrowheads. Blue arrowheads indicate residues that can be mapped onto the archaeal structure and black arrowheads indicate residues that were not mapped. ESpript was used to generate this figure⁷⁶.

Extended Data Table 1 |. Mass spectrometry analysis of the purified telomerase sample.

Proteins are ranked according to their percentage of sequence coverage eliminating keratins, histones, and abundant cytoskeletal proteins. Only proteins with sequence coverages of above 5% or known telomerase-associated proteins (highlighted in red background) with any level of detection are shown.

Protein name	Sequence count	Sequence coverage (%)	Length (aa)	MW (KDa)
NHP2 (H/ACA subunit 2)	2	19	153	17.2
NOP10 (H/ACA subunit 3)	1	17.2	64	7.7
Nuclease-sensitive element binding protein	4	13.6	324	35.9
Methylosome subunit pICIn	2	13.5	237	26.2
TERT	11	10.6	1132	127
Insulin-like growth factor 2	3	8.6	548	60.1
TCAB1/WDR79/WRAP53beta	3	8.6	548	59.3
squamous cell carcinoma antigen recognised by T-cells 3 (SART3)	6	8	963	110
Importin subunit a-1	3	7.8	529	57.9
Dyskerin (H/ACA subunit 4)	5	7.2	514	57.7
hnRNP A2/B1	2	7.7	313	33.9
hnRNP A3	1	5.8	378	39.6
Protein arginine N-methyltransferase 5	1	5.6	531	61.1
ATP-dependent RNA helicase DHX36	2	2.7	1008	114.8

Extended Data Table 2 |. Summary of cryo-EM data collection and modelling of protein and RNA subunits.

a. Cryo-EM data collection

	Catalytic Core (EMDB-7518)	H/ACA lobe (EMDB-7519)	Overall (EMDB-7521)
Data collection and processing
Magnification	300	300	300
Voltage (kV)
Electron exposure (e—/Å2)	42	42	42
Defocus range (μm)	1.5-3.5	1.5-3.5	1.5-3.5
Pixel size (Å)	1.15	1.15	1.15
Symmetry imposed	C1	Cl	Cl
Initial particle images (no.)	1,091,177	1,091,177	1,091,177
Final particle images (no.)	39,860	36,210	88,200
Map resolution (Å)	7.7	8.2	10.2
FSC threshold	0.143	0.143	0.143
Map resolution range (Å)	6-9	7-9

b. Modelling of protein and RNA subunits

Protein/RNA	Total residues	M.W. (KDa)	Domain	PDB code or modelling	Reference
TERT	1132	127	TEN	2B2A (Tetrahymena model)	34
			TRBD	4026 (medaka model)	33
			RT	3KYL (Tribolium model)	13
			CTE
TCAB1	548	59	β-propeller domain	homology model by Phyre
Dyskerin	514	57		2HVY (archaeal model)	24
GAR1	217	21
NOP10	64	8
NHP2	153	17
hTR	451	138	P1	A-form double helix
			P2a.1	model from Chan et al, 2017	10, 38
			P2a-J2a/b-P2b	2L3E	37
			template	3KYL	13
			P3	2K95	36
			P4	2HVY as part of the H/ACA RNP	24
			P4.1	A-form double helix
			P4.2	A-form double helix
			P5-P6.1-P6a	4026 (medaka model)	33
			P6b	A-form double helix
			P7	2HVY as part of the H/ACA RNP	24
			P8	2QH2	39