Sliding window haplotype approaches overcome single SNP analysis limitations in identifying genes for meat tenderness in Nelore cattle

Abstract

Background

Traditional single nucleotide polymorphism (SNP) genome-wide association analysis (GWAA) can be inefficient because single SNPs provide limited genetic information about genomic regions. On the other hand, using haplotypes in the statistical analysis may increase the extent of linkage disequilibrium (LD) between haplotypes and causal variants and may also potentially capture epistastic interactions between variants within a haplotyped locus, providing an increase in the power and robustness of the association studies. We performed GWAA (413,355 SNP markers) using haplotypes based on variable-sized sliding windows and compared the results to a single-SNP GWAA using Warner-Bratzler shear force measured in the longissimus thorasis muscle of 3161 Nelore bulls to ascertain the optimal window size for identifying the genomic regions that influence meat tenderness.

Results

The GWAA using single SNPs identified eight variants influencing meat tenderness on BTA 3, 4, 9, 10 and 11. However, thirty-three putative meat tenderness QTL were detected on BTA 1, 3, 4, 5, 8, 9, 10, 11, 15, 17, 18, 24, 25, 26 and 29 using variable-sized sliding haplotype windows. Analyses using sliding window haplotypes of 3, 5, 7, 9 and 11 SNPs identified 57, 61, 42, 39, and 21% of all thirty-three putative QTL regions, respectively; however, the analyses using the 3 and 5 SNP haplotypes, cumulatively detected 88% of the putative QTL. The genes associated with variation in meat tenderness participate in myogenesis, neurogenesis, lipid and fatty acid metabolism and skeletal muscle structure or composition processes.

Conclusions

GWAA using haplotypes based on variable-sized sliding windows allowed the detection of more QTL than traditional single-SNP GWAA. Analyses using smaller haplotypes (3 and 5 SNPs) detected a higher proportion of the putative QTL.

Electronic supplementary material

The online version of this article (10.1186/s12863-019-0713-4) contains supplementary material, which is available to authorized users.

Background

Following the completion of the first draft bovine reference genome assembly, a high-density single nucleotide polymorphism (SNP) genotyping assay was developed [1], enabling genome-wide association analyses (GWAA), which are useful in understanding the underlying biology of traits [2, 3]. Several GWAA have identified SNP associated with meat tenderness in cattle [4–7], which is one of the most important attributes impacting consumer satisfaction and the price of beef [8]. Moreover, meat tenderness is the most important trait requiring improvement in Nelore cattle in order to increase beef quality and ensure consumer acceptability. However, studies have shown that the traditional single-SNP GWAA can be inefficient because single-SNPs provide limited information about the content of flanking genomic regions [9, 10]. On the other hand, using haplotypes in the statistical analysis may increase the extent of linkage disequilibrium (LD) between haplotypes and causal variants and also potentially capture epistastic interactions between variants within a haplotyped locus, providing increased power and robustness for association studies [10–16].

The use of haplotypes in GWAA analysis has not been widely exploited because there is no consensus on how many adjacent SNPs should be haplotyped, or on what is the best methodology for the definition and analysis of the haplotype blocks [17]. Different criteria have been proposed, but the most widely used approach is based on the extent of LD between markers as described by [18], which combines SNPs into haplotype blocks in genomic regions of high LD, i.e., with low evidence for recombination. However, the use of this approach can result in “orphan” SNPs that fall outside of predefined LD blocks, leading to a loss in ability to dissect genetic variation in these regions in the association analysis [14]. Thus, haplotype block approaches may not be the most efficient approach for association studies [19]. An alternative strategy for performing haplotype-based association analyses is based on overlapping sliding windows, in which several neighboring contiguous SNPs are included in a haplotype analysis, spanning the entire genome regardless of the extent of LD between the markers [10, 14, 20]. This approach has been shown to be more powerful than single-SNP and LD block–based haplotype analyses, particularly in genomic regions with high recombination and low LD [10, 21, 22]. Furthermore, according to [10], the use of sliding window haplotype analysis increases the likelihood of QTL detection and identification of the genomic regions harboring the causal variants.

We performed a GWAA using haplotypes defined by variable-sized sliding windows and compared the results to single-SNP GWAA to ascertain the optimal window size for identifying QTL regions that influence meat tenderness in Nelore cattle. The results of this study provide a better understanding of the genetic basis of meat tenderness in zebu cattle.

Methods

Animals

The 3161 Nelore bulls used in this study were born between 2008 and 2013 and were sourced from three different animal breeding programs. These animals were raised on pasture, finished in a feedlot for approximately 90 days, and then slaughtered in commercial slaughterhouses at a mean age of 691 ± 102 days. Contemporary groups (CG) were defined by the combination of farm of origin, year of birth, management group as long-yearlings and month and year of slaughter. The animals belonged to 116 CG with at least three animals per group.

Phenotypic and genotypic data

The animals were slaughtered in commercial slaughter houses and the carcasses were identified by tags and chilled for 24 to 48 h post-mortem. Steaks of 2.54 cm thickness were then collected from the longissimus thoracis muscle between the 12th and 13th ribs from the left half of the carcasses. The steaks were vacuum sealed and aged in a cold chamber for 150 h at 1 °C and then were frozen at − 20 °C. Next, the steaks were cooked in an oven to an internal temperature of 71 °C as proposed by [23]. Warner-Bratzler shear force (WBSF), a mechanical measurement of tenderness, was measured 24 h after cooking using a Salter shearing device (G-R Electric, Manhattan, KS). Eight 1.27 mm meat cores were obtained from each sample and the average shear force of the eight cores was used in analysis. The mean WBSF for the 3161 Nelore bulls was 5.9 ± 1.80 kg varying from 1.6 kg to 11.9 kg.

Using a DNeasy Blood & Tissue Kit (Qiagen GmbH, Hilden, Germany), tissues from the longissimus thoracis muscle were used to extract DNA according to the manufacturer’s instructions. Genotyping was performed by high-density BeadArray technology (777 K) using the Illumina (San Diego, CA) BovineHD Infinium Assay® with an Illumina HiScan System® for 1405 animals and the 1756 remaining animals were genotyped with a lower density bead array (GGP75Ki). Genotypes were imputed to the content of the BovineHD assay and phased using FImpute software [24] including available pedigree information. The average imputation accuracy from GGP75Ki to Illumina® BovineHD was 98.93%, as reported by [25]. Samples for which the genotype call rate was less than 90% and SNP markers with a call rate of less than 95%, or that had a minor allele frequency of less than 5%, or Hardy Weinberg Equilibrium test statistic probability of less than 10^− 5 or that were unmapped to autosomes or sex-linked were removed. A total of 413,355 SNP markers remained for analysis. The genomic coordinates for each SNP marker were based on the Bos taurus UMD3.1 reference assembly.

Construction of haplotypes

Five different haplotype sizes were constructed based on overlapping sliding windows methodology spanning the entire genome: three (SW3), five (SW5), seven (SW7), nine (SW9) or eleven (SW11) SNPs. Given an ordered set of markers (SNP₁, SNP₂, SNP₃, ..., SNP_n), where n is the number of SNP markers on the chromosome, sliding windows of overlapping haplotypes are tested in sequence. i.e. for SW3: haplotype 1 (SNP₁-SNP₂-SNP₃), haplotype 2 (SNP₂-SNP₃-SNP₄), haplotype 3 (SNP₃-SNP₄-SNP₅), ..., haplotype n (SNP_n-2, SNP_n-1, SNP_n) [14, 20]. The haplotypes were estimated for each locus and the diplotype of each animal was estimated as the combination of haplotypes i and i’ at locus j. Thus, the dummy variable for each haplotype were coded as: 0 = no copies of the haplotype, 1 = one copy of the haplotype (paternal or maternal), and 2 = two copies of the haplotype (paternal and maternal).

Genome-wide association analysis

The WBSF was pre-adjusted for fixed effect of CG and age at slaughter as covariate (linear effect). Fixed effects were estimated using a single-trait animal model implemented in AIREMLF90 [26]. The univariate linear mixed model analysis was performed for pre-adjusted WBSF using single-SNPs and each size of haplotype (three, five, seven, nine or eleven SNPs) individually in GEMMA [27] using the model: y = 1μ + Xβ + Zu + e; u~MVN_n(0, GV_g); e~MVN_n(0, IV_e); where: y is an n-vector of pre-adjusted WBSF; μ is the overall mean; X is the incidence matrix for single SNP or haplotype; β is the single SNP allele or haplotype effects; Z is an n x n identity matrix; u is an n-vector of random residual additive genetic effects; G is a n x n genomic relationship matrix (GRM); e is a vector of residuals; V_g is the residual additive genetic variance component; V_e is the residual variance component; and I is an n x n identity matrix. MVN_n denotes the n-dimensional multivariate normal distribution. The GRM was estimated using the standardized genotypes for all 413,355 SNP markers retained for analysis following filtering, using GEMMA. The same GRM was used for the single-SNPs and haplotype-based association analyses.

Estimating additive genetic variance

The additive genetic variance (V_A) explained by SNP markers was estimated as: ${\sigma }_i^2=2p_i\left(1-p_i\right)a_i^2$, where: ${\sigma }_i^2$ is the additive genetic variance for the i^th SNP; p_i is the allele frequency of one of the alleles at the i^th SNP; and a_i is the additive effect of the i^th SNP. An equivalent equation was used to estimate V_A explained by the haplotyped loci [28], as follows: ${\sigma }_j^2=\sum _{i=1}^{k_j-1}\sum _{l=2}^{k_j}{\left(a_{\mathit{ij}}-a_{\mathit{lj}}\right)}^2{p}_{\mathit{ij}}{p}_{\mathit{lj}}$, for l > i, where: ${\sigma }_j^2$is the additive genetic variance for the j^th haplotype, a_ij is the additive effect of the i^th allele at the j^th haplotype, a_lj is the additive effect of the l^th allele at the j^th haplotype, p_ij is the allele frequency for the i^th allele at the j^th haplotype, p_lj is the allele frequency for the l^th allele at the j^th haplotype, and k_j is the number of existing alleles at the j^th haplotype. The additive effects and frequencies of the SNP and haplotype alleles were calculated using GEMMA software as described in section “Genome-wide association analysis”.

For the identification of the SNPs and haplotyped loci that explained the greatest amounts of V_A for WBSF, the estimated V_A were assumed to follow a gamma distribution with parameters shape (α) and rate (β) [29]. The parameters (α and β) were predicted using the V_A explained by the SNPs and haplotyped loci which allowed establishing the value of gamma distribution quantile corrected for multiple testing by Bonferroni method (α ≤ 0.05). For the SNPs, the α and β were predicted using an approximation of the Newton-Raphson method [30] as: $\widehat{\alpha }\approx \frac{3-s\sqrt{{\left(3-s\right)}^2+24s}}{12s}$, where: $s=ln\left(\frac{1}{N}\sum _{i=1}^N{\sigma }_i^2\right)-\frac{1}{N}\sum _{i=1}^N\mathit{ln}\left({\sigma }_i^2\right)$; $\widehat{\beta }=\frac{\widehat{a}}{{\mu }_{{\sigma }_i^2}}$, where: ${\mu }_{{\sigma }_i^2}$ is the mean of estimated V_A explained by the SNPs. For the haplotyped loci, the estimated V_A were dependent on the number of alleles at each haplotyped locus. Therefore, a cubic regression model was used to predict α as a function of the number of alleles. For the $\widehat{\beta }$ parameter, the Brody non-linear regression model [31] was applied, as follows: $\widehat{\beta }=A\left(1-{\mathit{Be}}^{-\mathit{kt}}\right)+\epsilon$, where: $\widehat{\beta }$ is a predicted β parameter; A is the asymptotic limit for the β parameter; B is the integration constant; k is the curve parameter representing the ratio of maximum growth rate to asymptotic limit of $\widehat{\beta }$; t is the number of alleles at the haplotyped locus; and ε is the residual. From these equations, it was possible to estimate the gamma distribution in order to establish the thresholds that allowed identifying haplotyped loci (regarding the number of alleles) and SNP markers that explained the greatest amounts of V_A for WBSF.

Linkage disequilibrium analysis

The LD between each pair of the SNPs (413,355), measured as r², was calculated using Haploview [32]. The average r² values according to distance between markers are displayed in Fig. 1. The regions that explained the greatest amounts of V_A for WBSF were classified as strong (r² > 0.6), moderate (0.2 < r² < 0.6), weak (0.1 < r² < 0.2), and not in LD (r² < 0.1) based on the average r² values between the SNPs.

Fig. 1.

Linkage disequilibrium (r²) values according to distance between pairs of markers

SNP and haplotype annotation and gene networks

The SNPs and the genomic regions harboring all of the haplotyped loci identified were annotated using the Variant Effect Predictor (VEP) Ensembl API [33]. The identified genes were used to predict a gene interaction network using the GeneMANIA Cytoscape plug-in [34], based on the source organism Homo sapiens.

Results

Genome-wide association analysis

The single-SNP GWAA identified eight variants influencing WBSF on BTA 3, 4, 9, 10 and 11 (Table 1). The SNP rs134499129 (BTA3) explained the greatest amount of V_A (0.072 kg²) and rs41623448 (BTA10) had the largest allele substitution effect (0.73 ± 0.09 kg). Four of the detected variants (rs109294639, rs134499129, rs41595711 and rs42732955), located in NOS1AP and SUCLG1 were intronic, and four variants (rs43490295, rs137367597, rs41623448 and rs136174419) were intergenic. The intronic variant rs109294639 was in moderate LD with rs134499129 and rs41595711 (r² = 0.26 and 0.24, respectively), whereas rs134499129 and rs41595711 were in strong LD (r² = 0.71). The intergenic variants rs41623448 and rs136174419 are located near TBCD21 and SUCLG1, at a distance of 37 and 68 kb, respectively. The SNPs rs136174419 (near SUCLG1) and rs42732955 (SUCLG1, intron 1) were in strong LD (r² = 0.79) at a distance of 74 kb. However, rs43490295, rs137367597 and rs41623448 are not in LD with any neighboring SNP markers.

Table 1.

SNP markers that explained the greatest additive genetic variance for meat tenderness in Nelore cattle

SNP marker	BTA	Position (bp)	Allele frequencies (effectsa)		Var (kg2)	Gene
rs109294639	3	7,384,182	T = 0.094 (− 0.40 ± 0.08)	C = 0.906 (0.40 ± 0.08)	0.027	NOS1AP (intron1)
rs134499129	3	7,390,035	A = 0.163 (− 0.51 ± 0.06)	G = 0.837 (0.51 ± 0.06)	0.072	NOS1AP (intron1)
rs41595711	3	7,391,544	T = 0.185 (− 0.30 ± 0.06)	C = 0.815 (0.30 ± 0.06)	0.027	NOS1AP (intron1)
rs43490295	4	1,008,553	G = 0.120 (− 0.37 ± 0.07)	A = 0.880 (0.37 ± 0.07)	0.028	–
rs137367597	9	1,116,610	C = 0.135 (−0.34 ± 0.07)	A = 0.865 (0.34 ± 0.07)	0.028	–
rs41623448	10	20,486,971	C = 0.064 (−0.73 ± 0.09)	T = 0.936 (0.73 ± 0.09)	0.063	near TBCD21
rs136174419	11	50,332,078	A = 0.112 (−0.37 ± 0.07)	G = 0.888 (0.37 ± 0.07)	0.028	near SUCLG1
rs42732955	11	50,406,682	A = 0.124 (−0.39 ± 0.07)	G = 0.876 (0.39 ± 0.07)	0.032	SUCLG1 (intron1)

SNP single nucleotide polymorphism, BTA Bos taurus autosome, Var SNP marker additive genetic variance

^aAllele substitution effects from GEMMA software (kg)

Using the haplotype-based analysis we identified haplotyped loci that explained the greatest amounts of V_A for WBSF (Table 2). Thirty-three putative QTL regions for WBSF were detected, with 19 being identified by at least two different haplotype-based analyses and five QTLs were identified in all of the haplotype-based analyses. The SW3, SW5, SW7, SW9 and SW11 analyses identified 57, 61, 42, 39, and 21% of all 33 putative QTL regions, respectively, whereas, the analyses using SW3 and SW5 jointly detected 88% of all 33 QTL regions. Increasing the number of SNPs included in the haplotyped loci did not always lead to an increase in the amount of V_A that was explained by the haplotypes. Some QTLs appeared to only be captured using larger haplotypes while other QTLs could only be detected using smaller haplotypes.

Table 2.

QTL regions for meat tenderness detected using haplotype-based analysis on variable-sized sliding windows

BTA	Region	Position (bp)	Dist	LD	Additive genetic variance (kg2)
					SNP	SW3	SW5	SW7	SW9	SW11
1	rs43761056 – rs137207255	6,317,864 – 6,324,488	6625	M	–	0.032	0.036	–	–	–
1	rs42493480 – rs42493494	125,981,534 – 126,011,455	29,922	M	–	–	0.031	0.034	0.038	–
3	rs109872503 – rs110244139	7,371,235 – 7,460,489	89,255	M	0.072	0.098	0.071	0.085	0.086	0.089
3	rs132795858 – rs134534136	29,474,206 – 29,610,884	136,679	S	–	0.038	0.049	0.051	0.051	0.050
3	rs132763845 – rs109427593	90,594,180 – 90,664,268	70,089	M	–	–	–	0.036	0.045	–
3	rs134111725 – rs133976586	93,949,186 – 94,067,553	118,368	S	–	–	–	–	–	0.040
4	rs43490295	1,008,553	–	N	0.028	–	–	–	–	–
4	rs137252969 – rs43385178	24,143,662 – 24,225,606	81,945	W	–	–	0.037	–	–	–
4	rs110513194 – rs135604613	27,834,564 – 27,894,006	59,443	S	–	–	–	–	0.042	–
5	rs136407209 – rs110430223	7,525,121 – 7,583,435	58,315	S	–	–	0.030	–	–	–
5	rs41587994 – rs109349300	18,434,417 – 18,465,179	30,763	S	–	0.036	0.034	–	–	–
8	rs133253155 – rs135484797	92,216,117 – 92,289,515	73,399	S	–	0.033	0.034	0.033	–	–
9	rs137367597	1,116,610	–	N	0.028	–	–	–	–	–
9	rs110938040 – rs135589084	12,339,368 – 12,406,450	67,083	M	–	–	–	–	0.048	0.053
9	rs136867942 – rs135252570	21,441,424 – 21,497,606	56,183	M	–	–	–	–	0.037	–
9	rs133390891 – rs43600182	61,168,282 – 61,197,874	29,593	S	–	–	0.037	–	–	–
9	rs110730224 – rs109847831	66,977,872 – 67,045,614	67,743	M	–	0.040	0.039	0.040	0.040	–
9	rs135160781 – rs110936646	100,716,451 – 100,721,452	5002	S	–	0.034	–	–	–	–
10	rs137812088 – rs133615734	20,448,593 – 20,541,764	93,172	M	0.063	0.040	0.041	0.038	0.044	0.052
10	rs134006987 – rs136312573	43,692,759 – 43,726,489	33,731	S	–	0.033	0.031	–	–	–
11	rs109122230 – rs41655045	5,751,331 – 5,768,629	17,318	M	–	0.033	–	–	–	–
11	rs43755797 – rs137032372	43,129,117 – 43,135,745	6629	M	–	0.032	–	–	–	–
11	rs136174419 – rs42731923	50,332,078 – 50,417,494	85,417	S	0.032	0.069	–	–	–	–
15	rs132639440 – rs136091960	72,439,829 – 72,470,564	30,736	M	–	–	0.036	0.040	0.051	–
17	rs110304377 – rs42926409	70,788,438 – 70,935,589	147,152	M	–	0.035	0.043	0.054	0.056	–
18	rs137081181 – rs134146295	14,849,540 – 14,991,573	142,034	S	–	0.039	0.041	0.043	0.043	0.045
24	rs135709192 – rs136715705	47,570,379 – 47,596,815	26,437	S	–	0.033	0.033	0.034	0.034	0.034
24	rs110779214 – rs109148899	48,585,933 – 48,632,298	46,366	S	–	0.038	0.038	–	–	–
24	rs136382747– rs135235176	55,868,854 – 55,975,740	106,887	M	–	–	–	0.040	–	–
25	rs110607501 – rs108984883	17,590,025 – 17,598,054	8030	S	–	0.033	0.034	0.034	–	–
26	rs133176306 – rs109605337	19,035,737 – 19,066,768	31,032	S	–	0.034	0.038	–	–	–
28	rs134774253 – rs42146826	26,876,269 – 26,885,074	8806	S	–	0.033	–	–	–	–
29	rs136755211 – rs42192064	43,980,089 – 44,042,363	62,275	S	–	–	0.032	0.032	–	–

BTA Bos taurus autosome, Dist distance, LD linkage disequilibrium, SNP single nucleotide polymorphism, SW Sliding window haplotype, SW3 SW of three SNPs, SW5 SW of five SNPs, SW7 SW of seven SNPs, SW9 Haplotype SW of nine SNPs, SW11 SW of eleven SNPs, S strong LD (r² > 0.6), M moderate LD (0.2 < r² < 0.6), W weak LD (0.1 < r² < 0.2), N not LD (r² < 0.1)

Putative QTLs identified are located on BTA 1, 3, 4, 5, 8, 9, 10, 11, 15, 17, 18, 24, 25, 26 and 29. SNPs within most of the QTL regions found in this study were in strong or medium pair-wise LD and the length of the QTL regions varied from 5 to 147 kb with an avarage of 63 kb, as shown in Table 2. The QTL with the largest effect was identified in all of the haplotype window size analyses, however, the window for the SW3 analysis explained the greatest amount of V_A (0.098 kg²). This QTL region harbors NOS1AP (BTA3) and includes three SNPs (rs109294639, rs134499129 and rs41595711) identified in the single-SNP GWAA.

The SNPs rs43490295 and rs137367597 on BTA4 and BTA9 (Table 2), respectively, were only detected by the single-SNP GWAA. On the other hand, the haplotype-based association analyses captured many QTL regions that were not identified by the single-SNP GWAA. Full results for single-SNP and haplotype-based association analyses for each number of alleles at haplotyped loci are shown in Additional files 1, 2, 3, and 4.

Gene network analysis

Figure 2 illustrates the interactions among the genes located in genomic regions detected as being influencing WBSF in this study. The constructed gene interaction network revealed that 66.7% of the constituant genes are known to be co-expressed in humans. Moreover, 26.7% of the genes co-localize indicating that they are expressed in the same tissue or that their proteins are both identified in the same cellular locations. In addition, 70% of the genes interact, suggesting that they are functionally associated. The gene interaction network also revealed 20 genes, presented as grey circles, that interact with genes in the genomic regions that cause variation in WBSF. Among these, CAPN1 is related to genes that were found to be influencing WBSF in this study. CAPN1 interacts with NEFH, NIN, PTPRK and THOC5 and is co-expressed with MRPL49, SUCLG1, TM7SF2 and NF2.

Fig. 2.

Gene interaction network for genes in QTL regions for meat tenderness (WBSF). Genes presented as black circles were located in the QTL regions and genes that interact with those as grey circles. Edges in purple, green and red represent co-expression relationships, genetic interactions and co-localizations, respectively

Discussion

We performed a single-SNP GWAA and investigated a strategy for haplotype-based analysis using variable-sized sliding windows to detect genomic regions that influence WBSF. The desirable alleles (negative effects) for all eight SNPs identified influencing WBSF using single-SNP GWAA were in low frequency (Table 1), indicating that selection for these desirable alleles could improve tenderness in Nelore cattle. We found haplotypes affecting WBSF that were not detected in the single-SNP analysis (Table 2). This is consistent with previous studies that have shown that haplotype-based analysis provides a greater power for QTL detection than does single SNP analysis [15, 16, 35, 36]. The most likely reason for this finding is that QTL are more likely to be in strong LD with a multi-marker haplotype than with a single biallelic SNP, thus haplotype-based association methods have the opportunity to capture greater numbers of associations [10, 37, 38].

Genome-wide association analysis

The single-SNP analysis detected two SNPs (rs43490295 and rs137367597) that were not identified in the haplotype-based analyses. These SNPs explained the smallest amounts of QTL variance among the detected SNPs (0.028 kg²) and they were not in LD with neighboring SNPs. Using simulated data, [21] showed that haplotypes did not provide an advantage for detecting QTL with small effect sizes. In addition, haplotype-based analysis may also not have captured these signals because haplotype-based tests tend to be more powerful when moderate to high levels of LD exist in a chromosome region [39].

The variable-sized sliding window haplotype analysis strategy was used to ensure that every region of the genome was included in the analysis and that causal loci could be spanned by haplotyped regions. However, the number of contiguous SNPs to include in a haplotype window is a variable that requires optimization [9, 10]. The optimal haplotype size will vary according to SNP density, the patterning of LD throughout the genome and the genetic architecture of trait variation [40, 41]. We investigated five window sizes for haplotypes, containing 3, 5, 7, 9 or 11 SNP markers (SW3, SW5, SW7, SW9 and SW11, respectively). The choice of a maximum window length of 11 SNP markers was made based upon computational efficiency. The SW5 analysis detected the largest number of haplotypes loci followed by the SW3 analysis. This result may be because longer haplotype windows are more likely to introduce analytical problems such as high rates of recombination among distal SNPs resulting in excessive numbers of haplotypes, creating noise and computer memory problems [39, 42], and reducing the benefits of improved LD between haplotypes and causal variants [43].

Grapes et al.[35, 44] also found that the power to detect QTL improved as haplotype length increased to 6 SNP markers and decreased thereafter using a simulated bovine data set. However, [45] has shown that haplotypic diversity was best captured by a 20-marker sliding window in U.S. Angus cattle. The extent of LD in Nelore is much less than in Angus [46], suggesting that smaller window sizes will optimally capture haplotypic diversity in indicine cattle breeds. This assumption is supported by the length of all haplotype windows found in this study that ranged from 5 kb to 147 kb, and the SNPs within most of the QTL regions were in strong or medium pair-wise LD (Table 2). As shown in Fig. 1, the useful LD in our population extends for less than 100 kb (r² < 0.15), which is consistent with the findings of [47]. This suggests that haplotypes based on sliding windows of size no more than 100 kb will capture the LD genome-wide. On the other hand, some putative QTLs were detected only by larger haplotypes. One possible explanation is that such QTL have small to very small effects on WBSF, therefore many informative SNPs grouped would have larger aggregated effects [22]. Other hypothesis is that only the allele frequencies of the larger haplotypes were similar to the QTL allele frequencies in these regions, which allowed their detection [21, 38]. Thus, since the genetic architecture and population history differ across genes and traits, it is not reasonable to expect that one single method would be superior at detection of all QTL [21].

Genes influencing WBSF

The SNP and haplotype-based association analyses identified 37 candidate genes influencing WBSF in Nelore cattle (Table 3). Among these, five genes (GAS8, OLFML3, TWIST1, GPRC5B, and HIPK1) are involved in myogenesis, which is responsible for generating muscle tissue during embryonic development, regeneration of the mature skeletal musculature and maintenance of tissue homeostasis [48–52].

Table 3.

Genes located in QTL regions for meat tenderness in Nelore cattle

BTA	Position (bp)	Genes	Gene Name	Gene type
1	6,317,864 – 6,324,488	–	–	–
1	125,981,534 – 126,011,455	–	–	–
3	7,371,235 – 7,460,489	ENSBTAG00000010158	NOS1AP	Protein coding
3	29,474,206 – 29,610,884	ENSBTAG00000024319	LOC107132293	Pseudogene
		ENSBTAG00000011322	HIPK1	Protein coding
		ENSBTAG00000011327	OLFML3	Protein coding
3	90,594,180 – 90,664,268	–	–	–
3	93,949,186 – 94,067,553	ENSBTAG00000002910	ECHDC2	Protein coding
		ENSBTAG00000003746	SCP2	Protein coding
		ENSBTAG00000026032	FERD3L	Protein coding
4	1,008,553	–	–	–
4	24,143,662 – 24,225,606	ENSBTAG00000010168	–	–
4	27,834,564 – 27,894,006	ENSBTAG00000039955	ZYG11A	Protein coding
		ENSBTAG00000046922	TWIST1	Protein coding
5	7,525,121 – 7,583,435	ENSBTAG00000009852	NAV3	Protein coding
5	18,434,417 – 18,465,179	–	–	–
8	92,216,117 – 92,289,515	–	–	–
9	1,116,610	–	–	–
9	12,339,368 – 12,406,450	-	-	-
9	21,441,424 – 21,497,606	–	–	–
9	61,168,282 – 61,197,874	ENSBTAG00000020713	BACH2	Protein coding
9	66,977,872 – 67,045,614	ENSBTAG00000020829	PTPRK	Protein coding
9	100,716,451 – 100,721,452	–	–	–
10	20,448,593 – 20,541,764	ENSBTAG00000007800	TBC1D21	Protein coding
10	43,692,759 – 43,726,489	ENSBTAG00000020281	NIN	Protein coding
11	5,751,331 – 5,768,629	ENSBTAG00000042179	U6	SnRNA
		ENSBTAG00000046971	LOC107131213	Protein coding
11	43,129,117 – 43,135,745	ENSBTAG00000016534	BCL11A	Protein coding
11	50,332,078 – 50,417,494	ENSBTAG00000006075	SUCLG1	Protein coding
		ENSBTAG00000042444	U6	SnRNA
15	72,439,829 – 72,470,564	ENSBTAG00000037580	MSANTD3	Protein coding
17	70,788,438 – 70,935,589	ENSBTAG00000013150	THOC5	Protein coding
		ENSBTAG00000013153	NF2	Protein coding
		ENSBTAG00000013152	NIPSNAP1	Protein coding
		ENSBTAG00000013147	NEFH	Protein coding
18	14,849,540 – 14,991,573	ENSBTAG00000007096	GAS8	Protein coding
		ENSBTAG00000025283	LOC101904595	Pseudogene
		ENSBTAG00000029640	U1	SnRNA
		ENSBTAG00000033441	SHCBP1	Protein coding
24	47,570,379 – 47,596,815	–	–	–
24	48,585,933 – 48,632,298	–	–	–
24	55,868,854 – 55,975,740	–	–	–
25	17,590,025 – 17,598,054	ENSBTAG00000019596	GPRC5B	Protein coding
		ENSBTAG00000044092	IQCK	Protein coding
26	19,035,737 – 19,066,768	–	–	–
28	26,876,269 – 26,885,074	–	–	–
29	43,980,089 – 44,042,363	ENSBTAG00000005069	TM7SF2	Protein coding
		ENSBTAG00000005073	ZNHIT2	Protein coding
		ENSBTAG00000005075	MRPL49	Protein coding
		ENSBTAG00000005076	SYVN1	Protein coding
		ENSBTAG00000015499	VPS51	Protein coding
		ENSBTAG00000020807	FAU	Protein coding

Several genes located in the QTL regions for WBSF, such as NEFH, FERD3L, NAV3, BCL11A, ZNHIT2, NOS1AP and SHCBP1, participate in neurogenesis processes (GO:0022008) or the structure and function of neurons. Neurogenesis is essential for skeletal muscle development and regeneration [53]. Motor neuron, a neuromuscular junction component, regulates skeletal muscle contraction [54] and also has a role in the development and differentiating of muscle fibers [55]. NEFH, SHCBP1 and NOS1AP have previously been associated with WBSF in Nelore steers [6]. Moreover, NOS1AP has been associated with longissimus muscle area and marbling score in cattle [56]. BCL11A has been associated with marbling score in Canchim beef cattle [57] and a QTL region for meat tenderness harbored ZNHIT2 in pigs [58].

The NIN and NF2 genes putatively affect skeletal muscle structure and composition. NIN encodes a microtubule nucleation protein, which has previously been associated with skeletal muscle differentiation [59]. NF2 participates in actin cytoskeleton organization (GO:0030036), which may explain the association with WBSF after 7 days of aging in Nelore steers found by [6]. This process results in the assembly, arrangement of constituent parts, or disassembly of cytoskeletal structures comprising actin filaments and their associated proteins (GO:0030036). Actin is a myofibril protein, one of the major components of the sarcomere, which has been reported to affect meat tenderness [60].

Genes involved in lipid and fatty acid metabolism, such as SUCLG1, THOC5, NIPSNAP1, IQCK, TM7SF2, VPS51, PTPRK, ECHDC2 and SCP2, were also found to influence meat tenderness. Positive effects of lipid on meat tenderness are likely due to the lipid within cells in the perimysium, which separate muscle fiber bundles [61]. Furthermore, [62] found a genetic correlation between meat tenderness and fatty acid abundance using animals from the same population as used in the present study. THOC5 was found to be differentially expressed between low and high marbling beef cattle in a longissimus dorsi muscle transcriptome analysis [63]. [58] reported that TM7SF2 and VPS51 were located within a QTL region for meat tenderness in pigs. The protein encoded by PTPRK has been associated with marbling in beef cattle [64]. ECHDC2 expression is negatively correlated with non-esterified fatty acid abundance in pigs [65]. SCP2 was down-regulated in pork with high intramuscular fat content [66] and was associated with WBSF after 7 and 14 days of aging in Nelore steers [6].

There was no evidence of a biological link or biological mechanism connecting TBC1D21, MSANTD3, MRPL49, SYVN1, FAU, ZYG11A or BACH2 genes to meat tenderness. These genes may play a role in the regulation of transcription or translation, or may interact with important genes for meat tenderness as shown in Fig. 2. TBC1D21 encodes a GTPase-activating protein (GO:0090630) for Rab family proteins, which are involved in spermatogenesis [67]. Its association with meat tenderness appears to be through interactions with BACH2 and PTPRK. MSANTD3 is a member of the MSANTD3 family which contains DNA binding domains for Myb proteins and the SANT domain family. [68] speculated that MSANTD3 may be a transcription factor. In addition, MSANTD3 interacts with BCL11A, NIN, NOS1AP, SCP2 and TWIST1. A QTL region for meat tenderness in pigs harbors MRPL49, SYVN1 and FAU [58]. ZYG11A encodes a protein that plays an important role in the regulation of ubiquitin-protein transferase activity (GO:0051438). A ZYG11A family member has been related to marbling in beef cattle [63]. BACH2 is a transcription repressor and plays essential roles in the regulation of B cell development. B cells function in the humoral immunity component of the adaptive immune system by secreting antibodies [69]. BACH2 has been related to intramuscular fat content in bulls [70] and was associated with WBSF in Nelore steers [6].

Gene network analysis

The gene network analysis (Fig. 2) revealed interactions among the genes within QTL regions for WBSF and other genes that were not detected as influencing WBSF in the present study (grey circles), which are enriched for their functions in the regulation of transcription (GO:0006355), cell differentiation (GO:0030154), lipid metabolic process (GO:0006629), regulation of angiogenesis (GO:0045766), thyroid hormone transport (GO:0070327), proteolysis (GO:0006508), cellular response to insulin stimulus (GO:0032869) and cytoskeleton organization (GO:0007010). Among these, is a well-known gene influencing WBSF, CAPN1, which is responsible for the postmortem breakdown of myofibrillar proteins and seems to be the primary enzyme involved in the postmortem tenderization process [71]. The CAPN1 interacts with TM7SF2, ZNHIT2, MRPL49, SYVN1, VPS51 and FAU genes that are located in a QTL region for meat tenderness in this study. In addition, all of these genes are located near CAPN1 on BTA29 and their SNPs are in strong LD with SNPs located in CAPN1 in this population (with maximum r² = 0.86).

Conclusions

This study demonstrates that GWAA using haplotypes based on variable-sized sliding windows provides substantially more power to detect QTL than does single-SNP analysis, suggesting that this methodology should be considered for genomic predictions for WBSF and other traits. Analyses performed with smaller haplotype windows (3 and 5 SNPs) detected a higher proportion of QTLs than the analyses that used larger SNP windows. However, no single sliding window analysis identified all of the QTL that were found in the analyses using window sizes from 3 to 11 SNPs. This suggests that haplotype-based GWAA should employ several window sizes in order to detect the largest number of putative QTL. Likewise, the single-SNP analysis found two putative QTL that were not found by the haplotype-based analyses. While these may be type I errors, they may also be regulatory variants.

We identified thirty-seven candidate genes influencing meat tenderness that participate in myogenesis, neurogenesis, lipid and fatty acid metabolism and skeletal muscle structure or composition processes. These findings contribute to a better understanding of the biological mechanisms underlying meat tenderness in Nelore cattle. Further validation of these genes and polymorphisms in different populations would contribute to their use in breeding programs for Nelore cattle.

Abbreviations

SNP

Single nucleotide polymorphism

GWAA

Genome-wide association analysis

LD

Linkage disequilibrium

QTL

Quantitative trait locus

CG

Contemporary group

WBSF

Warner-Bratzler shear force

SW3

Sliding window haplotypes of three SNPs

SW5

Sliding window haplotypes of five SNPs

SW7

Sliding window haplotypes of seven SNPs

SW9

Sliding window haplotypes of nine SNPs

SW11

Sliding window haplotypes of eleven SNPs

GRM

Genomic relationship matrix

VEP

Variant effect predictor

BTA

Bos taurus autosome

NO

Nitric-oxide

nNOS

Neuronal nitric oxide synthase

HDL

High-density lipoprotein

GO

Gene ontology

Authors’ contributions

CUB conceived the study, analyzed and interpreted the results and, wrote the manuscript. TB, RE and FLBF helped conceive the study. JFT, RC, FB and LGA assisted with preparation of the manuscript and aided with interpretation of results; HNO assisted with analyses, preparation of the manuscript and interpretation of results. All authors read and approved the final manuscript.

Ethics approval

Use of animals was approved by the São Paulo State University (Unesp), School of Agricultural and Veterinary Science Ethical Committee (Approval No. 18.340/16).

Consent for publication

Not applicable.

Competing interests

The authors declare that they have no competing interests.

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.