Design, synthesis, and biologic evaluation of novel chrysin derivatives as cytotoxic agents and caspase-3/7 activators

Abstract

Background

Chrysin (5,7-dihydroxyflavone) is a widely distributed natural flavonoid found in many plant extracts, honey and propolis. Several studies revealed that chrysin possesses multiple biological activities including anti-cancer effects. It has been established that activation of apoptosis is the key molecular mechanism responsible for the cytotoxic potential of chrysin. The objective of this study was to design and synthesize potent chrysin analogues as potential cytotoxic agents.

Methods

A series of chrysin derivatives (3a-m) bearing N′-alkylidene/arylideneacetohydrazide moiety were designed, synthesized, and evaluated for their antiproliferative activity against two human breast cancer cell lines, MDA-MB-231 and MCF-7 by applying the MTT colorimetric assay. Selected compounds were tested for their ability to induce apoptosis through caspase 3/7 activation in MDA-MB-231 cells only since MCF-7 cells lack procaspase 3.

Results

Compounds (3a-m) were obtained as geometrical isomers (E/Z isomers) in good yields upon treatment of hydrazide 5 with different aliphatic and aromatic aldehydes. Most of the synthesized compounds demonstrated moderate-to-good activity against both cell lines. The cytotoxicity results revealed the importance of lipophilic moieties at C-4 position of ring D in imparting the cytotoxic activities to the compounds. Compound 3e with 4-benzyloxy substituent was found to be the most active among the synthesized compounds with IC50 3.3 µM against MDA-MB-231 and 4.2 µM against MCF-7 cell lines. The cytotoxic potential of compound 3e is comparable to that of the well-known anti-cancer agent doxorubicin. In addition, compounds substituted with fluoro (3b), nitro (3h), and dimethylamino (3j) exhibited good cytotoxicity with IC₅₀ <6.5 µM against MDA-MB-231 and <12 µM against MCF-7. Selected compounds were able to induce apoptosis in MDA-MB-231 cells as indicated by caspase-3 and/or -7 activation.

Conclusion

Our results show that the newly designed chrysin derivatives exert anticancer activity in human breast cancer cell lines, MDA-MB-231 and MCF-7. Therefore, they can be considered as leads for further development of more potent and selective cytotoxic agents.

Introduction

Cancer is a worldwide epidemic that has been a primary concern in the field of medicinal chemistry research. Despite the significant work and the huge effort in finding cancer chemotherapeutic agents, many obstacles were faced including toxicity and lack of sensitivity.1,2 Therefore, there is a growing need to develop new and effective anticancer agents that can overcome the problems with the currently available agents.

Apoptosis or programmed cell death is a regulatory mechanism in multicellular organisms that plays a massive role in maintaining tissue homeostasis through balancing cell proliferation as well as eliminating unwanted and damaged cells.3–5 It has been established that the main mechanism of action for several anticancer agents involves induction of apoptosis.6 This leads to the fact that designing effective apoptosis inducers is considered a potential strategy to develop efficient anticancer agents. Caspases are well known to play a vital role in the process of apoptosis. Caspases 3 and 7 have been identified as key effector enzymes that are normally presented as inactive zymogens inside cells. Activating theses zymogens will result in irreversible apoptotic cell death.7 Accordingly, compounds that have the ability to activate caspases are of potential interest as new therapeutic anticancer agents.

Flavonoids are natural polyphenolic compounds that are abundant in plants and various common foods. Chrysin (5,7-dihydroxyflavone, compound 1 in Figure 1) is a widely distributed natural flavonoid found in many plant extracts, honey, and propolis. Chrysin exhibits a wide range of biologic activities such as antioxidant,8 antiallergic,9 antibacterial,10 anti-inflammatory,11 antidiabetic,12 anxiolytic,13 and anticancer effects.14 Several studies on a wide variety of cancer cell lines revealed that activation of apoptosis is the key molecular mechanism responsible for the anticancer activity of chrysin.14 In some types of cells, activation of apoptosis is associated with caspase-3 activation.15 To improve the pharmaceutical activity of chrysin, many recent studies have been done utilizing the synthesis of chrysin derivatives.16–20

Figure 1.

Chemical structures of chrysin (1), PAC-1 (2a), De-allyl PAC-1 (2b), and hybrid structure of 1 and 2 (3a-m).

On the other hand, it was reported that the proapototic small molecules PAC-1 and De-allyl PAC-1 (compounds 2a-b in Figure 1) induce apoptosis in different types of cancerous cells through activation of caspase-3/7.21,22 Structurally, compounds 2a-b possess an acetohydrazide moiety linked directly to the nitrogen atom of the benzylpiperazine moiety. It has been demonstrated that structural alterations on the acetohydrazide moiety of PAC-1 diminish the cytotoxic activity of the compound, whereas structural modifications on the corresponding piperazine ring retained the activity. These findings highlight the importance of the acetohydrazide moiety as a chemical feature required for the cytotoxic activity in contrast to the piperazine moiety that was found not essential for the activity. Based on these results and for obtaining potent chrysin analogs as cytotoxic agents, hybrid structures of chrysin (1) and compounds 2a-b were synthesized in which the chrysin scaffold was linked to the acetohydrazide moiety. The cytotoxic activities of the synthesized compounds were evaluated against two human breast cancer cell lines, MDA-MB-231 and MCF-7. Selected compounds were tested for their ability to induce apoptosis through caspase-3/7 activation in MDA-MB-231 cells only since MCF-7 cells lack procaspase 3.23,24 The general structure of the hybrid compounds (3a-m) is shown in Figure 1. The chemical modifications of the hybrid compounds were chosen to include a variety of aliphatic and para-substituted aromatic moieties.

Materials and methods

Chemistry

General experimental procedures Reagents and solvents were purchased from Sigma Aldrich, Acros Organics, and Cayman Chemicals and used without further purification. Reaction’s progress was qualitatively analyzed by thin-layer chromatography performed on precoated silica gel plates (Merk, Kieselgel 60 F-254, 0.2 mm). Compound spots were visualized by UV light (254 nm). Compounds were characterized by ¹H-NMR and ¹³C-NMR using a 400 MHz Bruker Avance Ultrashield Spectrometer (Switzerland); the spectra were obtained in ppm using automatic calibration to the residual proton peak of the solvent, DMSO-d₆. The ¹H NMR data are presented as follows: chemical shift (δ ppm), multiplicity (s = singlet, d = doublet, dd = doublet of doublet, t = triplet, q = quartet, m = multiplet), coupling constants (Hz), and integration. The ¹³C NMR analyses were reported in terms of chemical shift. ¹H and ¹³C NMR spectra for all compounds are included in the Supplementary material. HRMS data were acquired using a Thermo QExactive Plus mass spectrometer equipped with an electrospray ionization source (Thermo Fisher Scientific).

Synthesis of methyl 2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy)acetate (4)

Chrysin 1 (1.0 g, 3.93 mmol) and potassium carbonate (1.63 g, 11.8 mmol) were dissolved in 20 mL anhydrous DMF and allowed to cool down to 0°C in ice/water bath. Methyl 2-bromoacetate (0.37 mL, 3.93 mmol) was then added dropwise and the reaction mixture left stirring at the same temperature for 3 hours. After completion, the mixture was diluted with ethyl acetate (35 mL) and washed with water (35 mL × 2). The aqueous layers were combined and extracted with ethyl acetate (35 mL × 2). The combined organic layers were washed with brine, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure. The resulting residue was purified by flash column chromatography (5% methanol in chloroform) that afforded the desired product as pale yellow powder (0.77 g, 60%).

Alternative workup procedure: after reaction completion the reaction mixture was slowly poured into well-stirred ice/ water mixture. The formed precipitate was filtered, washed with water, and dried on air to give the title compound as pure yellow powder. Yield (1.2 g, 94%). ¹H NMR (DMSO-d₆): δ 12.80 (s, 1H), 8.11 (d, J=7.6 Hz, 2H), 7.62–7.56 (m, 3H), 7.04 (s, 1H), 6.84 (s, 1H), 6.43 (s, 1H), 4.96 (s, 2H), 3.73 (s, 3H).

Synthesis of 2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy)acetohydrazide (5)

Method A

A suspension of ester 4 (1.0 g, 3.0 mmol) in absolute ethanol (30 mL) was cooled down to 0°C in ice/water bath. To that was added dropwise 80% hydrazine hydrate (0.58 mL, 12 mmol). The resulting mixture was allowed to stir at same temperature for 1 hour and then at room temperature for few days. After completion, the reaction mixture was poured into ice/water mixture. The formed precipitate was filtered, washed with water, and dried on air overnight to give the desired pure product as off-white powder.

Method B

To an ice-cold suspension of ester 4 (1.0 g, 3.0 mmol) in anhydrous methanol (30 mL) was added dropwise 80% hydrazine hydrate (0.58 mL, 12 mmol) and few drops of hydrochloric acid. After 1 hour, the reaction was completed. The mixture was poured into ice/water mixture and the formed precipitate was filtered, washed with water, and dried on air overnight.

Yield (0.98 g, 98%). ¹H NMR (DMSO-d₆): δ 12.81 (s, 1H), 9.43 (s, 1H), 8.09 (d, J=7.2 Hz, 2H), 7.65–7.57 (m, 3H), 7.05 (s, 1H), 6.82 (d, J=1.6 Hz, 1H), 6.45 (d, J=1.68 Hz, 1H), 4.64 (s, 2H), 4.38 (s, 2H). ¹³C NMR (DMSO-d₆): δ 182.11, 165.85, 163.78, 163.62, 161.10, 157.21, 132.21, 130.57, 129.19, 126.48, 105.45, 105.27, 98.83, 93.57, 66.58. HRMS (ESI, m/z): calculated for C₁₇H₁₄N₂O₅ [M+H]⁺ 327.0975; found 327.0965.

General procedure for the synthesis of N′-alkylidene/arylidene-2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy)acetohydrazide (3a-m)

Method C

To a solution of hydrazide 5 (1.0 g, 3.0 mmol) in anhydrous DMF (60 mL) was added the appropriate aldehyde (3.0 mmol) and allowed to stir at room temperature for few days. Upon reaction completion, the mixture was poured into ice-cold water and the formed precipitate was filtered, washed with water exhaustively, and dried on air overnight to give pure desired compounds in good yields.

Method D

To a suspension of hydrazide 5 (1.0 g, 3.0 mmol) in anhydrous methanol (60 mL) was added the appropriate aldehyde (3.0 mmol) and few drops of hydrochloric acid. After 1 hour, the reaction was completed and the formed precipitate was separated by filtration, washed with methanol, and dried on air to give pure desired compounds in good yields.

(E, Z)-N′-benzylidene-2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy)acetohydrazide (3a)

The product was obtained as white powder. Yield (82%). ¹H NMR (DMSO-d₆) (E:Z=1:0.5): δ 12.84–12.81 (m, 1.5H), 11.69–11.63 (m, 1.5H), 8.34 (s, 0.5H), 8.12–8.04 (m, 4H), 7.76–7.45 (m, 12H), 7.08–7.06 (m, 1.5H), 6.89–6.87 (m, 1.5H), 6.50–6.43 (m, 1.5H), 5.34 (s, 2H), 4.85 (s, 1H). ¹³C NMR (DMSO-d₆): δ 182.03, 168.22, 164.40, 163.71, 163.58, 163.43, 163.41, 161.14, 161.05, 157.20, 148.07, 144.04, 134.01, 133.91, 132.10, 130.53, 130.20, 129.98, 129.08, 128.76, 127.14, 126.98, 126.44, 105.42, 105.30, 105.07, 98.70, 93.60, 93.45, 66.63, 65.32. HRMS (ESI, m/z): calculated for C₂₄H₁₈N₂O₅ [M+H]⁺ 415.1301; found 415.1284.

(E, Z)-N′-(4-fluorobenzylidene)-2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy)acetohydrazide (3b)

The product was obtained as off-white powder. Yield (62%). ¹H NMR (DMSO-d₆) (E:Z=1:0.5): δ 12.84–12.81 (m, 1.5H), 11.70–11.66 (m, 1.5H), 8.33 (s, 0.5H), 8.11–8.03 (m, 4H), 7.83–7.75 (m, 3H), 7.64–7.55 (m, 4.5H), 7.32– 7.27 (m, 3H), 7.06–7.05 (m, 1.5H), 6.88–6.85 (m, 1.5H), 6.49–6.41 (m, 1.5H), 5.33 (s, 2H), 4.84 (s, 1H). ¹³C NMR (DMSO-d₆): δ 182.03, 168.45, 166.87, 164.37, 163.67, 163.60, 163.48, 161.15, 161.06, 157.22, 146.88, 142.95, 138.03, 137.92, 132.10, 131.87, 131.67, 130.55, 129.68, 129.08, 127.16, 127.01, 126.45, 105.43, 105.32, 105.09, 98.73, 93.61, 93.48, 66.63, 65.34. HRMS (ESI, m/z): calculated for C₂₄H₁₇FN₂O₅ [M+H]⁺ 433.1194; found 433.1196.

(E, Z)-2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy)-N′-(4-hydroxybenzylidene)acetohydrazide (3c)

The product was obtained as white powder. Yield (90%). ¹H NMR (DMSO-d₆) (E:Z=1:0.5): δ 12.83–12.80 (m, 1.5H), 11.48–11.42 (m, 1.5H), 9.96–9.93 (m, 1.5H), 8.21–8.09 (m, 3.5H), 7.93 (s, 1H), 7.62–7.53 (m, 7.5H), 7.06–7.05 (m, 1.5H), 6.87–6.82 (m, 4.5H), 6.49–6.41 (m, 1.5H), 5.28 (s, 2H), 4.80 (s, 1H). ¹³C NMR (DMSO-d₆): δ 182.12, 182.07, 167.90, 164.48, 163.79, 163.68, 163.55, 163.07, 161.18, 161.09, 159.59, 159.37, 157.27, 157.24, 148.51, 144.50, 132.22, 132.16, 130.58, 129.20, 129.15, 129.01, 128.79, 126.50, 124.99, 115.75, 115.72, 105.46, 105.37, 105.34, 105.11, 98.80, 98.75, 93.66, 93.48, 66.72, 65.36. HRMS (ESI, m/z): calculated for C₂₄H₁₈N₂O₆ [M+H]⁺ 431.1237; found 431.1238.

(E, Z)-2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy)-N′-(4-methoxybenzylidene)acetohydrazide (3d)

The product was obtained as yellow powder. Yield (46%). ¹H NMR (DMSO-d₆) (E:Z=1:0.6): δ 12.84–12.80 (m, 1.6H), 11.56–11.49 (m, 1.6H), 8.27 (s, 0.6H), 8.11–8.09 (d, J=8 Hz, 3H), 7.97 (s, 1H), 7.71–7.55 (m, 8H), 7.06–7.00 (m, 5H), 6.87–6.84 (m, 1.6H), 6.50–6.41 (m, 1.6H), 5.30 (s, 2H), 4.82 (s, 1.2H), 3.80 (s, 4.8H). ¹³C NMR (DMSO-d₆): δ 182.03, 167.95, 164.43, 163.74, 163.59, 163.46, 163.10, 161.13, 161.04, 160.94, 160.74, 157.21, 147.97, 143.92, 132.10, 130.54, 129.08, 128.76, 128.57, 126.45, 114.25, 105.42, 105.30, 105.05, 98.69, 93.60, 93.45, 66.66, 65.31, 55.28. HRMS (ESI, m/z): calculated for C₂₅H₂₀N₂O₆ [M+H]⁺ 445.1394; found 445.1395.

(E, Z)-N′-(4-(benzyloxy)benzylidene)-2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy) acetohydrazide (3e)

The product was obtained as pale yellow powder. Yield (64%). ¹H NMR (DMSO-d₆) (E:Z=1:0.5): δ 12.84–12.81 (m, 1.5H), 11.56–11.50 (m, 1.5H), 8.27 (s, 0.5H), 8.11–7.97 (m, 4H), 7.70–7.32 (m, 15H), 7.10–7.05 (m, 4.5H), 6.87–6.85 (m, 1.5H), 6.49–6.42 (m, 1.5H), 5.30 (s, 2H), 5.16 (s, 3H), 4.82 (s, 1H). ¹³C NMR (DMSO-d₆): δ 182.07, 182.02, 167.97, 164.42, 163.73, 163.56, 163.44, 163.13, 161.13, 161.04, 160.02, 159.80, 157.20, 147.90, 143.84, 136.71, 132.15, 132.09, 130.54, 129.08, 128.76, 128.57, 128.43, 127.90, 127.73, 126.72, 126.44, 115.10, 105.41, 105.29, 105.05, 98.70, 93.59, 93.44, 69.33, 66.65, 65.32. HRMS (ESI, m/z): calculated for C₃₁H₂₄N₂O₆ [M+H]⁺ 521.1707; found 521.1707.

(E, Z)-N′-(4-formylbenzylidene)-2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy)acetohydrazide (3f)

The product was obtained as yellow powder. Yield (57%). ¹H NMR (DMSO-d₆) (E:Z=1:0.5): δ 12.84–12.81 (m, 1.5H), 11.90–11.86 (m, 1.5H), 10.04 (s, 1.5H), 8.41 (s, 0.5H), 8.11–7.97 (m, 10H), 7.62–7.57 (m, 4.5H), 7.07–7.06 (m, 1.5H), 6.88 (s, 1.5H), 6.50–6.45 (m, 1.5H), 5.38 (s, 2H), 4.88 (s, 1H). ¹³C NMR (DMSO-d₆): δ 192.66, 182.05, 168.56, 164.38, 163.77, 163.70, 163.64, 163.51, 161.15, 161.06, 157.23, 146.65, 142.70, 139.51, 139.41, 136.88, 136.72, 132.13, 130.55, 129.87, 129.11, 127.66, 127.53, 126.47, 105.45, 105.33, 105.10, 98.74, 93.64, 93.52, 66.62, 65.38. HRMS (ESI, m/z): calculated for C₂₅H₁₈N₂O₆ [M+H]⁺ 443.1237; found 443.1238.

(E, Z)-4-((2-(2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy)acetyl)hydrazono)methyl)benzoic acid (3g)

The product was obtained as white powder. Yield (65%). ¹H NMR (DMSO-d₆) (E:Z=1:0.5): δ 12.84–12.81 (m, 1.5H), 11.83–11.79 (m, 1.5H), 8.39 (s, 0.5H), 8.11–8.09 (m, 4H), 8.01–7.99 (m, 3H), 7.87–7.81 (m, 3H), 7.63–7.54 (m, 4.5H), 7.06–7.05 (m, 1.5H), 6.87–6.86 (m, 1.5H), 6.50–6.43 (m, 1.5H), 5.36 (s, 2H), 4.87 (s, 1H). ¹³C NMR (DMSO-d₆): δ 182.03, 168.46, 166.88, 164.37, 163.68, 163.60, 163.48, 161.16, 161.06, 157.22, 146.87, 142.95, 138.04, 137.92, 132.10, 131.88, 131.67, 130.55, 129.69, 129.08, 127.17, 127.01, 126.45, 105.43, 105.31, 105.10, 98.73, 93.61, 93.48, 66.63, 65.34. HRMS (ESI, m/z): calculated for C₂₅H₁₈N₂O₇ [M+H]⁺ 459.1186; found 459.1183.

(E, Z)-2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy)-N′-(4-nitrobenzylidene)acetohydrazide (3h)

The product was obtained as yellow powder. Yield (89%). ¹H NMR (DMSO-d₆) (E:Z=1:0.5): δ 12.84–12.81 (m, 1.5H), 11.97–11.94 (m, 1.5H), 8.44 (s, 0.5H), 8.30–7.97 (m, 10H), 7.61–7.57 (m, 4.5H), 7.06 (s, 1.5H), 6.88 (s, 1.5H), 6.50–6.45 (m, 1.5H), 5.39 (s, 2H), 4.89 (s, 1H).). ¹³C NMR (DMSO-d₆): δ 182.06, 168.68, 164.36, 163.92, 163.68, 163.63, 163.55, 161.16, 161.09, 160.06, 157.23, 147.82, 145.62, 141.69, 140.22, 132.14, 130.56, 129.55, 129.12, 128.10, 127.96, 126.47, 124.09, 123.96, 105.34, 105.11, 98.72, 98.57, 93.63, 93.55, 66.61, 65.37. HRMS (ESI, m/z): calculated for C₂₄H₁₇N₃O₇ [M+H]⁺ 460.1139; found 460.1136.

(E, Z)-2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy)-N′-(4-morpholinobenzylidene)acetohydrazide (3i)

The product was obtained as white powder. Yield (92%). ¹H NMR (DMSO-d₆) (E:Z=1:0.5): δ 12.83–12.80 (m, 1.5H), 11.48–11.41 (m, 1.5H), 8.20 (s, 0.5H), 8.10–8.08 (d, J=8 Hz, 3H), 7.92 (s, 1H), 7.60-7.55 (m, 7.5H), 7.05–6.97 (m, 4.5H), 6.86–6.83 (m, 1.5H), 6.49–6.40 (m, 1.5H), 5.28 (s, 2H), 4.80 (s, 1H), 3.73 (m, 6H), 3.19 (m, 6H). ¹³C NMR (DMSO-d₆): δ 182.07, 182.03, 167.76, 164.45, 163.76, 163.59, 163.47, 162.89, 161.13, 161.03, 157.21, 152.27, 152.12, 148.37, 144.39, 132.15, 132.10, 130.55, 129.10, 128.35, 128.13, 126.46, 124.18, 124.13, 114.30, 105.42, 105.30, 105.05, 98.70, 93.61, 93.44, 66.70, 65.92, 65.33, 47.47, 47.41. HRMS (ESI, m/z): calculated for C₂₈H₂₅N₃O₆ [M+H]⁺ 500.1816; found 500.1812.

(E, Z)-N′-(4-(dimethylamino)benzylidene)-2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy) acetohydrazide (3j)

The product was obtained as orange powder. Yield (45%). ¹H NMR (DMSO-d₆) (E:Z=1:0.5): δ 12.84–12.80 (m, 1.5H), 11.41–11.32 (m, 1.5H), 8.17–8.09 (m, 3.5H), 7.89 (s, 1H), 7.63–7.50 (m, 7.5H), 7.07–7.05 (m, 1.5H), 6.87–6.73 (m, 4.5H), 6.49–6.41 (m, 1.5H), 5.27 (s, 2H), 4.79 (s, 1H), 2.96 (s, 9H). ¹³C NMR (DMSO-d₆): δ 182.07, 182.02, 167.55, 164.47, 163.78, 163.59, 163.45, 162.67, 161.12, 161.02, 157.21, 151.57, 151.40, 148.88, 144.89, 132.15, 132.09, 130.54, 129.08, 128.48, 128.25, 126.45, 121.23, 121.19, 111.72, 105.42, 105.29, 105.03, 98.71, 93.61, 93.42, 66.72, 65.31. HRMS (ESI, m/z): calculated for C₂₆H₂₃N₃O₅ [M+H]⁺ 458.1710; found 458.1711.

(E, Z)-2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy)-N′-pentylideneacetohydrazide (3k)

The product was obtained as white powder. Yield (96%). ¹H NMR (DMSO-d₆) (E:Z=1:0.65): δ 12.82–12.79 (m, 1.65H), 11.24–11.19 (m, 1.65H), 8.10–8.09 (m, 3.3H), 7.60–7.59 (m, 5.6H), 7.35 (s, 1H), 7.04 (m, 1.65H), 6.84–6.77 (m, 1.65H), 6.46–6.35 (m, 1.65H), 5.12 (s, 2H), 4.73 (s, 1.3H), 2.22 (m, 3.3H), 1.45–1.32 (m, 6.6H), 0.89 (m, 4.95H). ¹³C NMR (DMSO-d₆): δ 182.03, 181.98, 167.42, 164.36, 163.71, 163.57, 163.46, 162.76, 161.09, 161.00, 157.16, 152.66, 148.67, 132.07, 130.53, 129.06, 126.42, 105.40, 105.29, 105.01, 98.67, 98.57, 93.57, 93.36, 66.53, 65.15, 31.49, 31.37, 27.97, 27.86, 21.68, 13.67. HRMS (ESI, m/z): calculated for C₂₂H₂₂N₂O₅ [M+H]⁺ 395.1601; found 395.1599.

(E, Z)-2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy)-N′-(2-methylpropylidene)acetohydrazide (3l)

The product was obtained as yellow powder. Yield (99%). ¹H NMR (DMSO-d₆) (E:Z=1:0.6): δ 12.83–12.80 (m, 1.6H), 11.25–11.16 (m, 1.6H), 8.11 (m, 3.2H), 7.6–7.59 (m, 5.4H), 7.30 (s, 1H), 7.05 (s, 1.6H), 6.85–6.78 (m, 1.6H), 6.46–6.36 (m, 1.6H), 5.13 (s, 2H), 4.74 (s, 1.2H), 1.07 (m, 9.6H). ¹³C NMR (DMSO-d₆): δ 182.07, 182.01, 167.67, 164.40, 163.74, 163.59, 163.50, 162.89, 161.11, 161.02, 157.19, 157.02, 152.96, 132.13, 130.56, 129.11, 126.46, 105.42, 105.31, 105.03, 98.70, 98.59, 93.59, 93.39, 66.53, 65.14, 30.95, 30.74, 19.49, 19.41. HRMS (ESI, m/z): calculated for C₂₁H₂₀N₂O₅ [M+H]⁺ 381.1444; found 381.1442.

(E, Z)-N′-ethylidene-2-((5-hydroxy-4-oxo-2-phenyl-4H-chromen-7-yl)oxy)acetohydrazide (3m)

The product was obtained as yellow powder. Yield (55%). ¹H NMR (DMSO-d₆) (E:Z=1:0.5): δ 12.82–12.78 (m, 1.5H), 11.26–11.22 (m, 1.5H), 8.12–8.10 (m, 3H), 7.62–7.58 (m, 5H), 7.37–7.36 (m, 1H), 7.04 (m, 1.5H), 6.82–6.77 (m, 1.5H), 6.44–6.35 (m, 1.5H), 5.13 (s, 2H), 4.73 (s, 1H), 1.90 (m, 4.5H). ¹³C NMR (DMSO-d₆): δ 182.08, 182.04, 167.35, 164.39, 163.75, 163.61, 163.50, 162.76, 161.13, 161.08, 161.01, 157.21, 148.90, 145.04, 132.16, 132.14, 130.56, 129.12, 126.47, 105.43, 105.30, 105.04, 98.80, 98.68, 98.63, 93.59, 93.39, 66.56, 66.51, 65.18, 18.21. HRMS (ESI, m/z): calculated for C₁₉H₁₆N₂O₅ [M+H]⁺ 353.1131; found 353.1131.

Biologic assays

Cell viability assay

The human breast cancer cell lines, MDA-MB-231 and MCF7, were purchased from the American Type Culture Collection. Cell viability was assessed using MTT colorimetric assay. Four thousand cells/well were plated in a 96-well plate in triplicate for each condition. After 24 hours of incubation, treatment compounds were added to each well as indicated, and the cells were further allowed to grow for 48 hours. Cell viability was assessed by adding 10 mL of filter-sterilized MTT solution at 0.5 mg/mL to each well. After 4 hours of incubation at 37°C, the medium was removed, and 100 µL of DMSO was added to each well to dissolve the blue formazan crystals. Absorbance was measured at a wavelength of 490 nm by using a Biotek ELX800 microplate reader (Biotek, Winooski, VT, USA). Cell viability was determined by dividing the absorbance values of the treated cells to that of the controlled cells and expressed as a percentage.

Detection of caspase-3/7 activation

Apoptosis was assessed using the Apo-one homogeneous caspase-3/7 assay (Promega). A total of 4,000 cells/well were plated in 100 µL culture medium in 96 black well plates in triplicate for each condition. After 24-hour incubation, treatment compounds were added to each well and the cells were further incubated for 48 hours. Then, caspase-3/7 substrate rhodamine 110 (Z-DEVD-R110) and homogeneous caspase-3/7 buffer were mixed in a 1:1,000 ratio to prepare homogeneous caspase-3/7 reagent. The reagent was added directly to each well to maintain a 1:1 ratio with sample volume and the cells were incubated for 3 hours at room temperature. Homogeneous caspase-3/7 buffer lyses cultured cell and supports optimal caspase-3/7 enzyme activity, while the caspase-3/7 substrate rhodamine 110 (Z-DEVD-R110), which exists as a profluorescent substrate upon interaction with the caspase-3/7 enzymes and excitation at 499 nm, cleaves the nonfluorescent substrate (Z-DEVD-R110) and creates the fluorescent rhodamine 110. Enzyme activity was measured after 3 hours at an excitation wavelength of 499 nm and an emission of 521 nm on synergy 2 multimode microplate reader (Biotek).

Results and discussion

Chemistry

The synthetic routes adopted for the synthesis of chrysin derivatives (3a-m) are outlined in Scheme 1. The commercially available chrysin (5,7-dihydroxy-2-phenyl-4H-chromen-4-one) 1 was treated with K₂CO₃ in anhydrous DMF to facilitate the formation of the chelation-controlled alkylation product of the 7-hydroxy group. Treatment of the resulting solution with methyl 2-bromoacetate at 0°C led to the formation of ester 4 in good yield.25 Attempts to convert ester 4 into hydrazide 5 were successful using the two procedures described in the Materials and methods section (methods A and B). Briefly, in method A, ester 4 was treated with 80% hydrazine hydrate in absolute ethanol at 0°C and allowed to stir at room temperature for few days. Although the desired compound was obtained in good yield and high purity, the reaction was time-consuming.

Scheme 1.

Reagents and conditions: (A) methyl 2-bromoacetate, K₂CO₃, DMF, 0°C; (B) hydrazine hydrate 80%, EtOH, 0°C; (C) different aldehydes, CH₃OH, HCl (cat.).

To overcome this problem, method B was used in which the ester 4 was treated with 80% hydrazine hydrate and few drops of hydrochloric acid in methanol at 0°C. After 1 hour, the reaction was completed and the resulting solid was filtered and washed with cold methanol. ¹H and ¹³C NMR confirmed the formation of hydrazide 5 as a pure single product. For example, ¹H NMR spectrum of hydrazide 5 displayed a singlet at δ 12.8 ppm indicating the presence of the chelated phenolic proton at C5 of the 4H-chromen-4-one ring (ie, OH on ring A) integrating for one proton. Proton atoms present on the phenyl ring (ring B) resonated as multiplet signals in the range δ 7.5–8.0 ppm. The three proton atoms that belong to the 4H-chromen-4-one ring (rings A and C) are resonated as doublet, doublet, and singlet signals at δ 6.4, δ 6.8, and 7.0 ppm, respectively. The –CH₂–O– protons appeared as a singlet at δ 4.6 ppm, whereas hydrazide group (CONHNH₂) appears as two singlets: one at δ 9.4 ppm integrating for one proton and one at δ 4.3 ppm integrating for two protons. The ¹³C NMR spectrum and HRMS data further confirmed the formation of the desired compound. This result reflects the stability of the α,β-unsaturated ketone functionality of 4H-chromen-4-one scaffold in the presence of the nucleophilic hydrazine hydrate reagent.

With hydrazide 5 in hand, several chrysin derivatives (3a-m) were obtained utilizing two facile procedures (methods C and D, see Materials and methods section). In both methods hydrazide 5 was treated with the appropriate aldehyde in a suitable solvent. The main difference between the two methods is the use of an acid as a catalyst (method D) that produced the desired products in short time (1–3 hours). It is important to mention that, when using method D, washing the precipitated products with water should be avoided because it leads to a reversible reaction producing hydrazide 5 as a byproduct.

All chrysin analogs (3a-m) gave adequate analytical and spectroscopic data, which were in full accordance with their depicted structures. ¹H and ¹³C NMR spectra showed that compounds 3a-m were obtained as geometrical isomers (E/Z isomers). The E:Z ratio for each compound was determined from ¹H NMR spectra utilizing the integration of the neat methylene group peaks that appeared as two separated singlets for the two isomers between δ 4.6 and 5.4 ppm. The ¹H NMR spectra for compound 3a, as an example, showed two characteristic overlapped singlets for the two isomers at δ 12.8 ppm representing the chelated phenolic C5–OH of the 4H-chromen-4-one ring. The CONH protons of the two isomers resonate as two overlapped singlets at δ 11.6 ppm. The N=CH protons of the two isomers appeared as two singlets at δ 8.3 and 8.0 ppm, which can be utilized to confirm the formation of E/Z isomers and their corresponding ratios. Proton atoms present on the phenyl rings (rings B and D) of the two isomers resonated as multiplet signals in the range δ 7.4–8.1 ppm, whereas the three proton atoms that belong to the 4H-chromen-4-one ring (rings A and C) are resonated as three multiplet signals at δ 6.46, δ 6.88, and 7.07 ppm. The methylene protons (CH₂O) for the two isomers appeared as two singlets at δ 5.3 and 4.8 ppm. The ¹³C NMR spectrum and HRMS data further confirmed the formation of the desired compound.

Biologic assays

Effect of compounds on the cytotoxicity in human cancer cells

The in vitro antiproliferative effect of novel chrysin analogs 3a-m was assayed against two human breast cancer cell lines, MDA-MB-231 and MCF-7, by applying the MTT colorimetric assay. As summarized in Table 1, the results were expressed in terms of IC₅₀ values (the minimum concentration in µM that causes 50% of cell death with respect to the control culture), where the well-known anticancer agent doxorubicin was used as a positive control.26 The results revealed that most of the synthesized compounds exhibit significant cytotoxic effect. These compounds were designed to test the importance of the phenyl ring (ring D) along with the corresponding ring substitution at the para position. The structure–activity relationship study revealed that the phenyl ring as well as the corresponding ring substitutions play important role in imparting the cytotoxic activities to the compounds. The parent compound 3a possessing an unsubstituted phenyl ring (ring D) was found to exhibit good and selective cytotoxic activity against MDA-MB-231 cell line with IC₅₀ 10.2 µM. Introducing a fluoro group at the para position (compound 3b) enhanced the cytotoxic activity toward both cell lines, significantly toward MCF-7. Replacement of the fluoro group with hydroxyl moiety produced compound 3c with significant reduced activity against both cell lines. Methylation of the hydroxyl group in 3c led to the compound 3d with considerable improved activity against both cell lines, when compared to compound 3c. Increasing the size of 4-methoxy group by replacing it with 4-benzyloxy group led to compound 3e with enhanced cytotoxic activity. Compound 3e was found to show the most potent activity against MDA-MB-231 with IC₅₀ 3.3 µM and MCF-7 with IC₅₀ 4.2 µM. The above results indicate that lipophilic groups at C-4 of ring D play a role in enhancing cytotoxic activities of the synthesized compounds. Accordingly, several derivatives (3f-3j) possessing different degrees of polarity were synthesized. Formyl (3f) and carboxy (3g) moieties were found to be detrimental for the cytotoxic activity. Nitro substituent (3h) demonstrated good cytotoxic activity against both cell lines with IC₅₀ <9 µM. Compound 3i with morpholinyl substituent demonstrated a moderate cytotoxic activity against MDA-MB-231 and no activity against MCF-7 cell lines. Replacing the morpholinyl substituent with dimethylamino moiety led to compound 3j with drastically enhanced cytotoxicity against MDA-MB-231 and MCF-7 with IC₅₀ 2.6 and 8.4 µM, respectively. Next, we investigated the importance of the phenyl ring (ring D) on cytotoxic activity of the synthesized compounds. For that, compounds 3k-m were synthesized in which the phenyl ring was replaced with aliphatic moieties including butyl (3k), isopropyl (3l), and methyl (3m) groups. It was observed that the above aliphatic modifications provided weaker activity against MDA-MB-231 and enhanced activity against MCF-7 cell lines, when compared to compound 3a.

Table 1.

Cytotoxic activities of compounds 3a-m and doxorubicin against two cancerous cell lines; MDA-MB-231 and MCF-7

No.	R	IC50 (µM)a
		MDA-MB-231	MCF-7
3a		10.2±2.2	<60
3b		5.5±2.2	11.7±1.8
3c		54.8±5.7	<60
3d		11.9±3.5	35.7±7.1
3e		3.3±0.8	4.2±2.1
3f		<60	<60
3g		<60	<60
3h		6.1±1.1	8.6±1.4
3i		21.7±2.3	<60
3j		2.6±0.6	8.4±5.7
3k		22.2±0.5	18.7±5.6
3l		37.8±4.2	29.7±1.1
3m		25.2±7.5	45±8.1
Doxorubicin	NA	2.3±0.3	2.9±0.1

Notes:

^aResult of MTT assay after 48-hour drug treatment. Compounds tested in triplicate, data expressed as mean values of independent experiments ± standard error of the mean.

Abbreviation: NA, not available.

Collectively, the results proved that the compounds with lipophilic moieties at C-4 position of ring D exhibit higher cytotoxic activity than the derivatives possessing highly or moderately polar moieties. Moreover, the data showed that aliphatic moieties are not good replacement for ring D when compared to derivatives bearing hydrophobic aromatic moieties. Compounds 3b, 3e, 3h, and 3j revealed to be the most active of the synthesized compounds with cytotoxic potential similar to that of the well-known anticancer agent doxorubicin.

Determination of the involvement of caspase-3/7 activation in MDA-MB-231 cells

As apoptosis is mediated by caspases, we investigated the ability of selected compounds (3a, 3b, 3d, 3e, and 3h) to activate the key effector caspases: caspase-3 and/or -7 in MDA-MB-231 cells. The cells were treated with different concentrations of the compounds (IC₅₀ and 2 × IC₅₀) for 48 hours, then analyzed for the activity of caspase-3/7 utilizing caspase-Glo assay. As shown in Figure 2, the five tested compounds caused activation of caspase-3/7 in which the best activation was provided by compound 3e that exhibited twofold increase of activity. Therefore, it can be deduced from the above results that the cytotoxic activities of the synthesized compounds are attributed to induction of apoptosis, which is mediated by caspase-3/7 activation.

Figure 2.

Activation of caspase-3/7 in MDA-MB-231 cells.

Note: The activity of caspase is expressed as percentage compared to untreated cells.

Conclusion

In summary, we have designed and synthesized a novel series of chrysin derivatives that have exhibited variable extent of cytotoxic activity against two human breast cancer cell lines, MDA-MB-231 and MCF-7. The cytotoxicity results of 3a-m established the importance of the phenyl ring (ring D) substituted with hydrophobic moieties at the para position. The data revealed that compounds substituted with benzyloxy (3e), dimethylamino (3j), nitro (3h), and fluoro (3b) are found to be potent cytotoxic agents that exhibited IC₅₀ <6.5 µM against MDA-MB-231 and <12 µM against MCF-7. The cytotoxic potential of the above compounds was comparable to that of the well-known anticancer agent doxorubicin. Mechanistic studies utilizing caspase-Glo assay revealed that selected compounds, at their IC₅₀ and 2 × IC₅₀ values, were able to induce apoptosis in MDA-MB-231 cells as indicated by caspase-3 and/or -7 activation. The results provided valuable information to design further modifications for obtaining more potent and selective cytotoxic agents.