Abstract
Implant rupture is a common complication of breast implant surgery. Removal of silicone gel after breast implant rupture can be difficult and time-consuming. In the medical literature, a few other methods attempt to solve this challenge. We propose a simple and efficient technique to maximize its removal by suction. This method bypasses the problem, given the disadvantages of silicone's high viscosity. Moreover, the necessary equipment is inexpensive and readily available in any operating room.
Keywords: Silicone spread, Breast implant rupture, Revision mastoplasty
Introduction
Implant rupture is a common complication of breast implant surgery. Removal of silicone gel after breast implant rupture can be difficult and time-consuming. We propose a simple and efficient adapted technique to maximize its removal by suction.
Method
Suction of silicone is difficult due to its viscosity. Using a wide bore solid 60 ml plastic syringe (BD, Becton, Dickinson and Company Limited, Ireland) attached to a liposuction machine (PSI-TEC III Aspiration System, Mentor, CA 93111 USA) will overcome this viscosity even in cohesive gel implants. Following removal of the plunger, the ‘open' end of syringe is inserted into the capsule via a very small capsulotomy. Suction tubing is connected to the other end of the syringe. The machine is switched on to a pressure of 400–600 mbar and the silicone is extracted (see video).
Discussion
Complete silicone gel removal is recommended to prevent complications such as inflammation, capsular contraction and silicone nodules from developing.1 Two other authors have proposed different vacuum-assisted techniques to help silicone gel removal after implant rupture. In 2006, O'Neill and Taylor2 reported the use of a 1 liter saline bottle connected to a ‘Baldwin spike adaptor,' which is connected to suction tubing. In 2009, Bell et al. recommended the use of a 60 ml Toomey syringe connected to suction tubing in order to bluntly grasp the capsule during en bloc capsular removal and reduce intracapsular silicone volume in order to prevent accidental silicone extravasation during removal.3 We propose this adapted technique to rapidly remove all silicone from the implant capsule.
Acknowledgments
Conflict of Interest
The authors declare that they have no conflicts of interest to disclose.
Acknowledgments
The authors thank Martina Fera and Franco Gastaldi for their friendship and contribution.
Footnotes
Supplementary material associated with this article can be found, in the online version, at doi:10.1016/j.jpra.2019.04.001.
Contributor Information
Giuseppe Pizzonia, Email: g.pizzonia@chirurgo-estetico.it.
Andrea Sasso, Email: andrea.sasso1@gmail.com.
Gaetano Musumarra, Email: dr.gmusumarra@gmail.com.
Appendix. Supplementary material
References
- 1.Procedural statistics. Available online: http://www.surgery.org/media/statistics, 2014. Downloaded October 2018.
- 2.O'Neill J, Taylor I. A novel method to remove silicone gel after breast implant rupture. J Plast Reconstr Aesth Surg. 2006;59:889–891. doi: 10.1016/j.bjps.2005.11.019. [DOI] [PubMed] [Google Scholar]
- 3.Bell MG, Doumit GD, Buinewicz BR. Removal of silicone breast implants and review of literature. Can J Plast Surg. 2009;17(4):e48–e49. [PMC free article] [PubMed] [Google Scholar]
Associated Data
This section collects any data citations, data availability statements, or supplementary materials included in this article.