Skip to main content
NCBI home page
Elsevier - PMC COVID-19 Collection logoLink to Elsevier - PMC COVID-19 Collection
. 2013 Jul 24;25(7):1362–1367. doi: 10.1016/S1001-0742(12)60196-X

Detoxifying PCDD/Fs and heavy metals in fly ash from medical waste incinerators with a DC double arc plasma torch

Xinchao Pan a, Jianhua Yan b, Zhengmiao Xie a,*
PMCID: PMC7128985  PMID: 24218848

Abstract

Medical waste incinerator (MWI) fly ash is regarded as a highly toxic waste because it contains high concentrations of heavy metals and dioxins, including polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs). Therefore fly ash from MWI must be appropriately treated before being discharged into the environment. A melting process based on a direct current thermal plasma torch has been developed to convert MWI fly ash into harmless slag. The leaching characteristics of heavy metals in fly ash and vitrified slag were investigated using the toxicity characteristic leaching procedure, while the content of PCDD/Fs in the fly ashes and slags was measured using method 1613 of the US EPA. The experimental results show that the decomposition rate of PCDD/Fs is over 99% in toxic equivalent quantity value and the leaching of heavy metals in the slag significantly decreases after the plasma melting process. The produced slag has a compact and homogeneous microstructure with density of up to 2.8 g/cm3.

Key words: medical waste incinerator, fly ash, plasma torch, PCDD/Fs, heavy metal

References

  1. Alvim-Ferraz MCM, Afonso SAV. Incineration of healthcare wastes: management of atmospheric emissions through waste segregation. Waste Management. 2005;25(6):638–648. doi: 10.1016/j.wasman.2004.07.017. [DOI] [PubMed] [Google Scholar]
  2. Aristizábal B, Cobo M, Hoyos A, de Correa CM, Ábalos M, Martínez K. Baseline levels of dioxin and furan emissions from waste thermal treatment in Colombia. Chemosphere. 2008;73(S1):S171–S175. doi: 10.1016/j.chemosphere.2007.03.078. [DOI] [PubMed] [Google Scholar]
  3. Bonizzoni G, Vassallo E. Plasma physics and technology: industrial applications. Vacuum. 2002;64(3–4):327–336. [Google Scholar]
  4. Chan C, Jia CQ, Graydon JW, Kirk D. The behaviour of selected heavy metals in MSW incineration electrostatic precipitator ash during roasting with chlorination agents. Journal of Hazardous Materials. 1996;50(1):1–13. [Google Scholar]
  5. Chen T, Yan JH, Lu SY, Li XD, Gu YL, Dai HF. Characteristic of polychlorinated dibenzo-p-dioxins and dibenzofurans in fly ash from incinerators in China. Journal of Hazardous Materials. 2008;150(3):510–514. doi: 10.1016/j.jhazmat.2007.04.131. [DOI] [PubMed] [Google Scholar]
  6. Cheng TW, Tu CC, Ko MS, Ueng TH. Production of glass-ceramics from incinerator ash using lab-scale and pilot-scale thermal plasma systems. Ceramics International. 2011;37(7):2437–2444. [Google Scholar]
  7. Cobo M, Gálvez A, Conesa JA, de Correa CM. Characterization of fly ash from a hazardous waste incinerator in Medellin, Colombia. Journal of Hazardous Materials. 2009;168(2–3):1223–1232. doi: 10.1016/j.jhazmat.2009.02.169. [DOI] [PubMed] [Google Scholar]
  8. Gomez E, Rani DA, Cheeseman CR, Deegan D, Wise W, Boccaccini AR. Thermal plasma technology for the treatment of wastes: A critical review. Journal of Hazardous Materials. 2009;161(2–3):614–626. doi: 10.1016/j.jhazmat.2008.04.017. [DOI] [PubMed] [Google Scholar]
  9. Károly Z, Mohai I, Tóth M, Wéber F, Szépvölgyi J. Production of glass-ceramics from fly ash using arc plasma. Journal of the European Ceramic Society. 2007;12(2–3):1721–1725. [Google Scholar]
  10. Katou K, Asou T, Kurauchi Y, Sameshima R. Melting municipal solid waste incineration residue by plasma melting furnace with a graphite electrode. Thin Solid Films. 2001;386(2):183–188. [Google Scholar]
  11. Liu HQ, Wei GX, Liang Y, Dong FY. Glass-ceramics made from arc-melting slag of waste incineration fly ash. Journal of Central South University of Technology. 2011;18(6):1945–1952. [Google Scholar]
  12. Martha C, Araceli G, Juan AC, Consuelo MC. Characterization of fly ash from a hazardous waste incinerator in Medellin, Colombia. Journal of Hazardous Materials. 2009;168(2–3):1223–1232. doi: 10.1016/j.jhazmat.2009.02.169. [DOI] [PubMed] [Google Scholar]
  13. Pan XC, Ma ZY, Wang Q, Tu X, Yan JH. Study on vitrification of fly ashes from municipal wastes incinerator with a plasma torch. Environmental Science. 2008;29(4):1114–1118. [PubMed] [Google Scholar]
  14. Pan XC, Yan JH, Ma ZY, Tu X, Cen KF. Research on characteristics of a DC double-anode arcs plasma torch. Journal of Power Engineering. 2008;28(1):132–136. [Google Scholar]
  15. Shaaban AF. Process engineering design of pathological waste incinerator with an integrated combustion gases treatment unit. Journal of Hazardous Materials. 2007;145(1–2):195–202. doi: 10.1016/j.jhazmat.2006.11.013. [DOI] [PubMed] [Google Scholar]
  16. Shi DZ, Wu WX, Lu SY, Chen T, Huang HL, Chen YX. Effect of MSW source-classified collection on the emission of PCDDs/Fs and heavy metals from incineration in China. Journal of Hazardous Materials. 2008;153(1–2):685–694. doi: 10.1016/j.jhazmat.2007.09.026. [DOI] [PubMed] [Google Scholar]
  17. Sukandar S, Yasuda K, Tanaka M, Aoyama I. Metals leachability from medical waste incinerator fly ash: A case study on particle size comparison. Environmental Pollution. 2006;144(3):726–736. doi: 10.1016/j.envpol.2006.02.010. [DOI] [PubMed] [Google Scholar]
  18. Tu X, Chéron BG, Yan JH, Cen KF. Dynamic behaviour of dc double anode plasma torch at atmospheric pressure. Journal of Physics D: Applied Physics. 2007;40(13):3972–3979. [Google Scholar]
  19. Tu X, Chéron BG, Yan JH, Cen KF. Electrical and spectroscopic diagnostic of an atmospheric double arc argon plasma jet. Plasma Sources Science and Technology. 2007;16(4):803–812. [Google Scholar]
  20. Tu X, Chéron BG, Yan JH, Yu L, Cen KF. Characterization of an atmospheric double arc argon-nitrogen plasma source. Physics of Plasmas. 2008;15(5):053504-1–53504-10. [Google Scholar]
  21. Tu X, Wang Q, Yu L, Chéron BG, Yan JH, Cen KF. Diagnostic of novel atmospheric plasma source and its application to vitrification of waste incinerator fly ash. Energy and Fuels. 2008;22(5):3057–3064. [Google Scholar]
  22. Tu X, Yan JH, Chéron BG, Cen KF. Fluctuations of DC atmospheric double arc argon plasma jet. Vacuum. 2008;82(5):468–475. [Google Scholar]
  23. Tu X, Yan JH, Yu L, Cen KF, Chéron BG. The nature of fluctuations in a double arc argon-nitrogen plasma jet. Applied Physics Letters. 2007;91(13):131501. [Google Scholar]
  24. Tu X, Yan JH, Yu L, Cen KF, Chéron BG. Heat flux characteristics in an atmospheric double arc argon plasma jet. Applied Physics Letters. 2008;93(15):151501. [Google Scholar]
  25. Tu X, Yu L, Yan JH, Cen KF, Chéron BG. Plasma vitrification of air pollution control residues from municipal solid-waste incineration. IEEE Transactions on Plasma Science. 2010;38(12):3319–3325. [Google Scholar]
  26. Wang Q, Tian SL, Wang QH, Huang QF, Yang J. Melting characteristics during the vitrification of MSWI fly ash with a pilot-scale diesel oil furnace. Journal of Hazardous Materials. 2008;160(2–3):376–381. doi: 10.1016/j.jhazmat.2008.03.043. [DOI] [PubMed] [Google Scholar]
  27. Wang Q, Yan JH, Chi Y, Li XD, Lu SY. Application of thermal plasma to vitrify fly ash from municipal solid waste incinerators. Chemosphere. 2010;78(5):626–630. doi: 10.1016/j.chemosphere.2009.10.035. [DOI] [PubMed] [Google Scholar]
  28. Wang Q, Yan JH, Tu X, Chi Y, Li XD, Lu SY. Thermal treatment of municipal solid waste incinerator fly ash using DC double arc argon plasma. Fuel. 2009;88(5):955–958. [Google Scholar]
  29. Yan JH, Pan XC, Ma ZY, Tu X, Cen KF. Temperature measurement of DC argon plasma jet. Spectroscopy and Spectral Analysis. 2008;28(1):6–9. [PubMed] [Google Scholar]
  30. Yan JH, Peng Z, Lu SY, Li XD, Ni MJ, Cen KF. Degradation of PCDD/Fs by mechanochemical treatment of fly ash from medical waste incineration. Journal of Hazardous Materials. 2007;147(1–2):652–657. doi: 10.1016/j.jhazmat.2007.02.073. [DOI] [PubMed] [Google Scholar]
  31. Yang Y, Xiao Y, Vonchen JHL, Wilson N. Thermal treatment and vitrification of boiler ash from a municipal solid waste incinerator. Journal of Hazardous Materials. 2007;154(1–3):1–3. doi: 10.1016/j.jhazmat.2007.10.116. [DOI] [PubMed] [Google Scholar]
  32. Zhao LJ, Zhang FS, Chen MJ, Liu ZG, Wu da BJZ. Typical pollutants in bottom ashes from a typical medical waste incinerator. Journal of Hazardous Materials. 2010;173(1–3):181–185. doi: 10.1016/j.jhazmat.2009.08.066. [DOI] [PMC free article] [PubMed] [Google Scholar]
  33. Zhao LJ, Zhang FS, Wang KS, Zhu JX. Chemical properties of heavy metals in typical hospital waste incinerator ashes in China. Waste Management. 2008;29(3):1114–1121. doi: 10.1016/j.wasman.2008.09.003. [DOI] [PMC free article] [PubMed] [Google Scholar]

Articles from Journal of Environmental Sciences (China) are provided here courtesy of Elsevier

RESOURCES