Skip to main content
NCBI home page
Nature Communications logoLink to Nature Communications
. 2020 May 22;11:2569. doi: 10.1038/s41467-020-16451-x

Selective C-H trifluoromethoxylation of (hetero)arenes as limiting reagent

Zhijie Deng 1, Mingxin Zhao 1, Feng Wang 1, Pingping Tang 1,✉
PMCID: PMC7244481  PMID: 32444828

Abstract

Methods for direct C-H trifluoromethoxylation of arenes and heteroarenes are rare, despite the importance of trifluoromethoxylated compounds for pharmaceuticals, agrochemicals, and material sciences. Especially selective C-H trifluoromethoxylation of pyridines remains a formidable challenge. Here we show a general late-stage C-H trifluoromethoxylation of arenes and heteroarenes as limiting reagent with trifluoromethoxide anion. The reaction is mediated by silver salts under mild reaction conditions, exhibiting broad substrate scope and wide functional-group compatibility. In addition, ortho-position selective C-H trifluoromethoxylation of pyridines is observed. The method is not only applicable to the gram-scale synthesis of trifluoromethoxylated products but also allows efficient late-stage C-H trifluoromethoxylation of marketed small-molecule drugs, common pharmacophores and natural products.

Subject terms: Drug discovery and development, Diversity-oriented synthesis, Synthetic chemistry methodology

Selective C-H trifluoromethoxylation of pyridines remains a formidable synthetic challenge. Here, the authors report a silver-mediated late-stage C-H trifluoromethoxylation of arenes and heteroarenes as limiting reagents with trifluoromethoxide anion.

Introduction

Trifluoromethoxy (OCF3) groups are becoming increasingly important in pharmaceuticals, agrochemicals, and material sciences. In particular, the introduction of trifluoromethoxy groups into arenes and heteroarenes is of paramount importance in organic molecules because of their outstanding electronegativity and high lipophilicity (Fig. 1a)1–3. For example, Riluzole is the first approved drug for the treatment of patients with neurological diseases such as amyotrophic lateral sclerosis4; Celikalim is a potent potassium channel opener in human airway smooth muscles5. Many pesticides also contain the OCF3 group, such as Triflumuron, Indoxacarb, and Thifluzamide6. In addition, 2-(trifluoromethoxy)pyridine and 2-(trifluoromethoxy)quinoline derivatives are especially useful for drugs and agrochemicals7. Despite the development of methods for the synthesis of trifluoromethoxylated compounds that has been an area of great interest, only a few examples have been reported for the synthesis of trifluoromethoxylated arenes and heteroarenes8–13. Especially the most atom economical C-H trifluoromethoxylation of arenes and heteroarenes remains a formidable challenge due to the reversible decomposition of trifluoromethoxide anion and the limited number of available trifluoromethoxylation reagents14–32. Traditional methods for the synthesis of aryl trifluoromethyl ethers employed classical approaches such as reactions of phenols via fluoroformate or chlorothionoformate intermediates, followed by nucleophilic fluorination with antimony trifluoride, hydrofluoric acid, or sulfur tetrafluoride at 100–160 °C33–37. The harsh reaction conditions can only be tolerated by structurally simple phenol derivatives. In this context, Togni reported the successful trifluoromethylation of 2,4,6-trimethylphenol with the Togni’s reagent and up to 15% yield of the desired aryl trifluoromethyl ether38, while Wu reported the synthesis of N-heteroaromatic trifluoromethoxy compounds by direct O-CF3 bond formation with the Togni’s reagent39. Umemoto reported the trifluoromethylation of phenols using Umemoto’s reagent under photoirradiation at −100 °C40. In 2014, Ngai reported a two-step sequence of O-trifluoromethylation of N-aryl-N-hydroxylamine and intramolecular OCF3 migration to prepare trifluoromethoxylated aniline derivatives41,42. Qing reported a silver-mediated oxidative trifluoromethylation of phenols with Ruppert–Prakash reagent43. Both of these reactions were realized with CF3 reagents (Fig. 1b). Recently, Ritter reported a silver-mediated cross-coupling of aryl stannanes and aryl boronic acids to produce trifluoromethoxylated arenes with tris(dimethylamino)sulfonium trifluoromethoxide44. The trifluoromethoxylation of arenediazonium tetrafluoroborates with stoichiometric silver or stoichiometric copper was described by Tang and our group45,46. The synthesis of phenyl and naphthyl trifluoromethyl ether was reported by the groups of Kolomeitsev and Hu, via the addition of trifluoromethoxide to benzyne and α-naphthyne generated in situ47,48. Hartwig reported the trifluoromethoxylation of quinoline and phenanthridine N-oxide to synthesize heteroaromatic trifluoromethyl ethers49. These reactions utilized pre-functionalized arenes and heterocyclic N-oxide as substrates, which might hamper the applicability for late-stage modifications of complex small molecules (Fig. 1c).

Fig. 1. Arene and heteroarene C-H trifluoromethoxylation.

Fig. 1

Open in a new tab

a Applications of OCF3-containing compounds. b Trifluoromethylation with [CF3]. c Trifluoromethoxylation with anionic OCF3. d Trifluoromethoxylation with OCF3 radical. e Direct C-H trifluoromethoxylation with anionic OCF3.

Direct functionalization of a C-H bond with a trifluoromethoxy group would be advantageous for the step-economic synthesis of trifluoromethoxy ethers. However, only a few examples of direct C-H trifluoromethoxylation of (hetero)arenes were reported to date. In 2018, the groups of Ngai and Togni independently reported the intermolecular C-H trifluoromethoxylation of (hetero)arenes employing a photoredox catalyst with the N-OCF3 reagents50–52. Mechanism involving a OCF3 radical was proposed. However, excess of (hetero)arenes was required to achieve good yields of the desired products as mixture of isomers (o:m:p). In addition, no example of ortho-position selective C-H trifluoromethoxylation of pyridines was reported (Fig. 1d). It is certainly highly desirable to develop an efficient and general approach for the selective (hetero)aromatic C-H trifluoromethoxylation, preferably with 1 equivalent of (hetero)arenes, which would be a powerful tool for late-stage trifluoromethoxylation of drug candidates, agrochemicals, and natural products. Herein we report a silver-mediated direct C-H trifluoromethoxylation with arenes and heteroarenes as the limiting reagent (Fig. 1e). Compared to previous reports, exclusive ortho-selective C-H trifluoromethoxylation of pyridines and selective C-H trifluoromethoxylation of ortho- and para-position of arenes are achieved. This method not only exhibits high efficiency and wide functional-group compatibility but also allows the late-stage trifluoromethoxylation of bioactive molecules and natural product derivatives.

Results

Investigations of reaction conditions and scope

In order to improve the regioselectivity of the direct (hetero)aromatic C-H trifluoromethoxylation reactions, we envisioned to in situ generate the proposed Ag(II)OCF3 intermediate in the presence of silver salts, oxidant, and trifluoromethyl arylsulfonate (TFMS), which was triggered by fluoride ions to deliver OCF3 anion as reported in our previous results53–55. The Ag(II)OCF3 intermediate could coordinate with pyridine substrates and give the desired products through the trifluoromethoxylation at the ortho-position of pyridines. In order to test our hypothesis, we chose 4-(tert-butyl)pyridine 1a as the model substrate for the direct trifluoromethoxylation of C(sp2)-H bonds (Table 1). No desired product 3a was observed in the absence of silver salts (Table 1, entry 1). We were delighted to find that 62% yield of the desired product 3a was observed when AgF2 was used as the silver salts (Table 1, entries 2–6). The oxidant was important for this transformation, and Selectfluor could give the best yield. Switching to other oxidants, Selectfluor II, N-fluorobenzenesulfonimide, PhI(OAc)2, and K2S2O8 could generate 3a in lower yields (Table 1, entries 7–10). In addition, CsF was the best fluoride source, which reacted with TFMS to generate CsOCF3. The poorly soluble CsOCF3 ensured that the intermediate Ag(II)OCF3 was generated gradually, which might slow down the decomposition of OCF3 anion. Less than 10% yields of the desired products were detected in control experiments with no CsF or oxidant. It was worth mentioning that exclusive selective for C-H trifluoromethoxylation adjacent to nitrogen was observed. The main by-product was 4-(tert-butyl)−2-fluoropyridine, which was generated from fluorination of pyridines with AgF2. After extensive screening of various solvents, different substitutions on TFMS, and temperatures (see more details in Supplementary Tables 1–8), the ideal conditions under 1.0 equiv of AgF2, 2.0 equiv of Selectfluor, 3.0 equiv of CsF, 3.0 equiv of TFMS (2) in dimethyl carbonate (DMC) under N2 atmosphere at 35 °C were found to produce the highest yields of the desired product 3a (method A).

Table 1.

Optimization of reaction conditionsa.

graphic file with name 41467_2020_16451_Figa_HTML.gif
Entry Silver salt Fluoride Oxidant Yield (%)b
1 None CsF Selectfluor 0
2 Ag2O CsF Selectfluor 48
3 Ag2CO3 CsF Selectfluor 50
4 AgF CsF Selectfluor 53
5 AgO CsF Selectfluor 46
6 AgF2 CsF Selectfluor 62 (58)c
7 AgF2 CsF Selectfluor II 47
8 AgF2 CsF K2S2O8 44
9 AgF2 CsF NFSI 0
10 AgF2 CsF PhI(OAc)2 0
11 AgF2 CsF None 9
12 AgF2 KF Selectfluor 57
13 AgF2 NaF Selectfluor 11
14 AgF2 Et3N•HF Selectfluor 0
15 AgF2 None Selectfluor 10
Open in a new tab

DMC: dimethyl carbonate.

aReaction conditions: 4-(tert-butyl)-pyridine (1a) (1.0 equiv), silver salt (1.0 equiv), oxidant (2.0 equiv), fluoride (3.0 equiv), TFMS (2) (3.0 equiv), DMC, N2, 35 °C.

bYields were determined by 19F NMR with benzotrifluoride as an internal standard.

cIsolated yield.

With the optimized reaction conditions in hand, this method was further applied to a number of pyridines with representative electron-rich substitutions, providing the corresponding ortho-selective C-H trifluoromethoxylation products in good yields (Fig. 2). However, the extension of the method to the trifluoromethoxylation of pyridines with electron-deficient substitution resulted in relatively low efficiency, and there were a lot of starting material recovered. This might be attributed to that Selectfluor (E1/2red = +0.33 V vs saturated calomel electrode (SCE) in CH3CN) is not strong enough to oxidize electron-deficient substrates well56. We then switched Selectfluor to AgF2 (the redox potential of the Ag(I)/Ag(II) couple is +1.98 V vs SCE)57, a stronger oxidant and powerful reagent in C-H fluorination of pyridines with either electron-donating or electron-withdrawing substituents58–62. Gratifyingly, the expected trifluoromethoxylation products could be achieved in high efficiency when the reaction was carried out with AgF2 (4.0 equiv) as the oxidant and fluoride source in MeCN solution at 10 °C (method B). The generality of the method was then clearly demonstrated by the synthesis of trifluoromethoxylated products (3g, 3j, 3k, 3m, 3p to 3t) in satisfactory yields from the corresponding electron-deficient pyridines (Fig. 2). In contrast, the extension of method B to the trifluoromethoxylation of electron-rich pyridines resulted in low yields with the generation of large amounts of fluorinated by-products. Perhaps, before the Ag(II)OCF3 intermediate was formed, AgF2 reacted with electron-rich pyridines under this condition to give the fluorinated by-products.

Fig. 2. Substrate scope of simple arenes and heteroarenes.

Fig. 2

Open in a new tab

aMethod A: 1 (1.0 equiv), AgF2 (1.0 equiv), TFMS (2) (3.0 equiv), Selectfluor (2.0 equiv), CsF (3.0 equiv), DMC, N2, 35 °C. bMethod B: 1 (1.0 equiv), AgF2 (4.0 equiv), TFMS (2) (4.0 equiv), MeCN, N2, 10 °C. cMethod C: 1 (1.0 equiv), AgF2 (1.0 equiv), TFMS (2) (4.0 equiv), Selectfluor (2.0 equiv), CsF (4.0 equiv), 4-tert-butyl-2,6-bis(4-tert-butylpyridin-2-yl)pyridine (0.1 equiv). DMC, N2, 35 °C. dMethod D: 1 (1.0 equiv), AgF2 (4.0 equiv), TFMS (2) (4.0 equiv), di(pyridin-2-yl)methanone (0.1 equiv), MeCN, N2, 10 °C. eK2S2O8 was used instead of Selectfluor. fYields were determined by the 19F NMR spectrum using benzotrifluoride as internal standards.

Having established the reaction protocol for the C(sp2)-H trifluoromethoxylation of pyridines, we next focused on the C(sp2)-H trifluoromethoxylation of arenes and other heterocyclic compounds, which are certainly of high value. Direct application of the method A to the trifluoromethoxylation of model substrate 2-chloro-6-methoxyquinoline (1ff) resulted in a low conversion (5% yield). This phenomenon might be ascribed to the relatively low concentration and stability of Ag(II)–OCF3 species responsible for trifluoromethoxylation. A possible solution was adding a ligand to coordinate with Ag(II)–OCF3 species like pyridine, which could increase the solubility and stability of intermediate. We then screened a number of ligands based on method A. With a catalytic amount of 4,4′,4″-tri-tert-butyl-2,2′:6′,2″-terpyridine as the ligand, the yield of the trifluoromethoxylation reaction was increased from 5% to 76% (see Supplementary Table 9). The optimal conditions were thus determined as to run the reaction in DMC at 35 °C with AgF2 (1 equiv) as the reaction medium, Selectfluor (2 equiv) as the oxidant, TFMS (4 equiv) as the OCF3 source, CsF (4 equiv) as the fluorine source, and 4,4′,4″-tri-tert-butyl-2,2′:6′,2″-terpyridine (0.1 equiv) as the ligand (method C). Method C was then applied to the trifluoromethoxylation of a variety of (hetero)arenes, and the results are summarized in Fig. 2. Substrates with electron-donating substituents on the (hetero)aromatic ring all underwent C-H trifluoromethoxylation smoothly, furnishing the corresponding products in satisfactory yields. However, the same problem appeared in the relatively electron-deficient substrates, which need AgF2 (4 equiv) as the oxidant and di(pyridin-2-yl)methanone (0.1 equiv) as the ligand (method D). In addition, <5% yield of trifluoromethoxylated products with more electron-deficient substrates, such as (trifluoromethyl)benzene and nitrobenzene, were observed even with method D, and 11% yield was obtained when benzene was used as the substrate. Although this trifluoromethoxylation method was not suitable for electron-deficient arenes, mono-, di-, and tri-substituted pyridines with both electron-donating and electron-withdrawing groups are tolerated, and other heteroaromatic substrates, such as quinoline, indole, thiophene, chromone, and coumarin, were also successfully employed to provide the corresponding trifluoromethoxylated products (3ee–3jj). A good range of functional groups including ester, ether, ketone, acetal, nitrile, nitro, hydroxyl, and halogens were well tolerated under these mild reaction conditions. Compared to the previous reports, only 1 equiv of (hetero)arenes was used in the reaction, and exclusive ortho-position selective C-H trifluoromethoxylation of pyridines was achieved. In addition, compounds 3p and 3ff were prepared in a gram scale in 75% and 73% isolated yield, respectively, which demonstrates the scalability of this method.

The direct trifluoromethoxylation of aromatic C-H bonds could facilitate access to trifluoromethoxylated derivatives of complex small molecules that would otherwise be difficult to produce. Given that a trifluoromethoxy group is present in a range of small-molecule drugs and preclinical candidates, we examined a number of well-known natural products or drug derivatives (Fig. 3). Each of these architecturally complex molecules underwent (hetero)aryl C-H trifluoromethoxylation to achieve the corresponding trifluoromethoxylated products in moderate yields (4kk–4tt, 22–76% yield). For example, etoricoxib, a selective cyclooxygenase-2 inhibitor and a non-steroidal anti-inflammatory drug, was used as the substrate to give the corresponding trifluoromethoxylated product 4kk in 22% yield via method B. The trifluoromethoxylation of tropicamide, an anticholinergic drug containing a unprotected hydroxyl group and an acidic α-phenyl amide, proceeded with method A to form the product 2ll. 3-(Pyridin-4-yloxy)propyl ester of β-lactamase inhibitor sulbactam underwent ortho-position selective C-H trifluoromethoxylation of the pyridine ring to produce 4oo in 40% isolated yield. In another case, Tanshinone IIA with significant effect in treating coronary heart disease was nicely converted to its trifluoromethoxylated product 4rr in 32% yield via method C. The trifluoromethoxylation reaction of apigenin derivative, which is a natural product found in many plants, proceeded smoothly to provide the corresponding product (4ss) in 76% yield. Finally, a trifluoromethoxylated derivative of hypolipidemic drug fenofibrate was readily prepared in 35% yield via method D. The structure of the products 4kk and 4ss were confirmed by X-ray crystallographic analysis. These results illustrated the ability to conduct the late-stage (hetero)aromatic C-H trifluoromethoxylation of complex structures.

Fig. 3. Late-stage C-H trifluoromethoxylation of natural products and drug derivatives.

Fig. 3

Open in a new tab

aMethod A: 1 (1.0 equiv), AgF2 (1.0 equiv), TFMS (2) (3.0 equiv), Selectfluor (2.0 equiv), CsF (3.0 equiv), DMC, N2, 35 °C. bMethod B: 1 (1.0 equiv), AgF2 (4.0 equiv), TFMS (2) (4.0 equiv), MeCN, N2, 10 °C. cMethod C: 1 (1.0 equiv), AgF2 (1.0 equiv), TFMS (2) (4.0 equiv), Selectfluor (2.0 equiv), CsF (4.0 equiv), 4-tert-butyl-2,6-bis(4-tert-butylpyridin-2-yl)pyridine (0.1 equiv). DMC, N2, 35 °C. dMethod D: 1 (1.0 equiv), AgF2 (4.0 equiv), TFMS (2) (4.0 equiv), di(pyridin-2-yl)methanone (0.1 equiv), MeCN, N2, 10 °C. eK2S2O8 was used instead of Selectfluor.

Although the mechanistic details of this transformation are not clear, a series of experiments were performed to gain insight into the mechanism of the reactions (Fig. 4a). No trifluoromethoxylated product 3h was observed when 2-fluoropyridine reacted with TFMS in the presence of the base. In all, 29% yield of trifluoromethoxylated product 3a and 19% yield of by-product 3a’ were observed when AgF2 was replaced by AgOTf. These results indicated that the trifluoromethoxylated products were not generated from nucleophilic aromatic substitutions (SNAr) of the 2-fluoropyridine63. When N-fluoropyridinium salt was used as the substrate, no desired product 3h was observed. Furthermore, kinetic isotopic effect experiments were conducted by treatment of pyridine and deuterated pyridine under the reaction conditions. A kH/kD value of 2.1 was obtained in a competitive reaction and 1.8 in parallel reactions on the basis of 19F nuclear magnetic resonance analysis, which was indicative of a primary kinetic isotope effect. In addition, no trifluoromethoxylated product was formed when the radical inhibitor 2,2,6,6-tetramethyl-1-piperidinyloxy (1 equiv) or 2,6-di-tert-butyl-4-methylphenol (4 equiv) was added, and electron paramagnetic resonance experiments were performed with the addition of free radical spin trapping agent α-(4-pyridyl N-oxide)-N-tert-butylnitrone (POBN). The signals of unknown organic radicals were observed, which did not match the previously reported POBN-OCF3• adducts51 (see more details in Supplementary Fig. 2). Furthermore, several pieces of data indicated that a free OCF3 radical was not involved in the reaction. First, the exclusive selectivity for trifluoromethoxylation at the 2-position of pyridines was observed, which contrasts with the mixture of isomeric products formed in varying amounts for the addition of alkyl, aryl, and fluoroalkyl radicals to pyridines depending on the steric and electronic properties of the reactants64–67. Second, 2,6-dimethylpyridine did not undergo trifluoromethoxylation, while an OCF3 radical should add to the 3- or 4-position. Third, C-H trifluoromethoxylation of tert-butylbenzene (3u) could get (o,p)-products, which was different from the previous report with (o:m:p) isomers via an OCF3 radical by Ngai52,68. Finally, compared to the previous reports with moderate yields, <5% yield of trifluoromethoxylated products were observed using more electron-deficient arenes as the substrates in our reaction.

Fig. 4. Mechanistic studies and proposed mechanism.

Fig. 4

Open in a new tab

a Mechanistic studies. b Proposed mechanism for pyridines. c Proposed mechanism for arenes.

On the basis of these mechanistic investigations, we proposed the mechanism depicted in Fig. 4. When pyridines were used as the substrates (Fig. 4b), the mechanism would involve initial coordination of AgF2 to pyridines, then reacted with TFMS to produce intermediate I, followed by single-electron transfer between Ag(II)OCF3 and pyridines leads to the generation of intermediated II, followed by addition OCF3 anion to get intermediate III, which is oxidized to form cation intermediate IV, then generated the desired products by proton abstraction. When arenes were the substrates (Fig. 4c), the mechanism was similar to pyridines with the production of intermediate V first. The subsequent single-electron transfer between Ag(II)OCF3 and arenes leads to the generation of Ag(I)OCF3 species and intermediated VI, followed by addition OCF3 anion to get intermediate VII, which is oxidized to form carbocation intermediate VIII, then generated the desired products by proton abstraction.

Discussion

In conclusion, we have presented a silver-mediated late-stage C-H trifluoromethoxylation reaction with arenes and heteroarenes as limiting reagent, which allows efficient late-stage trifluoromethoxylation of a variety of organic molecules and known drugs. Although the trifluoromethoxylation method reported herein needs stoichiometric amount silver salts, it affords exclusive ortho-position selective C-H trifluoromethoxylation of pyridines. The reaction is operationally simple under mild conditions, tolerates a large range of functional groups, and is applicable to the gram-scale synthesis of trifluoromethoxylated products. It is anticipated to serve for the late-stage modification to quickly obtain structural diversity in drug development.

Methods

General procedure for the synthesis of trifluoromethoxylated products

Method A: In a glove box, to a 15.0-mL sealed tube were added in sequence Selectfluor (354 mg, 1.00 mmol, 2.00 equiv), AgF2 (72 mg, 0.50 mmol, 1.00 equiv), CsF (228 mg, 1.50 mmol, 3.00 equiv), 10.0 mL DMC, pyridines (0.50 mmol, 1.00 equiv), and TFMS (240 μL, 1.50 mmol, 3.00 equiv). The mixture was stirred at 35 °C for 24 h. After cooling to 23 °C, the reaction mixture was filtered through a short plug of silica gel eluting with approximately 25 mL of CH2Cl2 or EtOAc. The filtrate was concentrated, and the residue was purified by chromatography on silica gel.

Method B: In a glove box, to a 2.0-mL sealed tube were added in sequence pyridines (0.50 mmol, 1.00 equiv), 0.5 mL MeCN (the solvent was pre-cooled to −30 °C), and TFMS (320 μL, 2.00 mmol, 4.00 equiv), then AgF2 (290 mg, 2.0 mmol, 4.00 equiv) was added at once in one portion. The mixture was stirred at 10 °C for 36 h. After warming up to 23 °C, the reaction mixture was filtered through a short plug of silica gel eluting with approximately 25 mL of CH2Cl2 or EtOAc. The filtrate was concentrated, and the residue was purified by chromatography on silica gel.

Method C: In a glove box, to a 15.0-mL sealed tube were added in sequence Selectfluor (354 mg, 1.0 mmol, 2.00 equiv) or K2S2O8 (270 mg, 1.0 mmol, 2.00 equiv), AgF2 (72 mg, 0.50 mmol, 1.00 equiv), CsF (304 mg, 2.00 mmol, 4.00 equiv), 4-tert-butyl-2,6-bis(4-tert-butylpyridin-2-yl)pyridine (20.0 mg, 0.05 mmol, 0.10 equiv), 10.0 mL DMC, arenes or heteroarenes (0.50 mmol, 1.00 equiv), and TFMS (320 μL, 2.00 mmol, 4.00 equiv). The mixture was stirred at 35 °C for 24 h. After cooling to 23 °C, the reaction mixture was filtered through a short plug of silica gel eluting with approximately 25 mL of CH2Cl2 or EtOAc. The filtrate was concentrated, and the residue was purified by chromatography on silica gel.

Method D: In a glove box, to a 2.0-mL sealed tube were added in sequence di(pyridin-2-yl)methanone (9.2 mg, 0.05 mmol, 0.10 equiv), AgF2 (290 mg, 1.0 mmol, 4.00 equiv), 1.0 mL MeCN, arenes or heteroarenes (0.50 mmol, 1.00 equiv), and TFMS (320 μL, 2.00 mmol, 4.00 equiv). The mixture was stirred at 10 °C for 36 h. After warming up to 23 °C, the reaction mixture was filtered through a short plug of silica gel eluting with approximately 25 mL of CH2Cl2 or EtOAc. The filtrate was concentrated, and the residue was purified by chromatography on silica gel.

Supplementary information

Supplementary Information (15.2MB, pdf)

Acknowledgements

This work was supported by the National Key Research and Development Program of China (2016YFA0602900), NFSC (21672110, 21925105), and the Fundamental Research Funds for the Central Universities.

Author contributions

Z.D., M.Z., and F.W. performed the experiments and analyzed the data. P.T. designed and directed the project and wrote the manuscript. All the authors discussed the results and commented on the manuscript.

Data availability

The authors declare that the data supporting this study are available within the article and Supplementary Information files. The X-ray crystallographic coordinates for compounds (4kk, 4ss) reported in this study have been deposited at the Cambridge Crystallographic Data Centre (CCDC), under deposition numbers 1954409 and 1954410. These data can be obtained free of charge from The Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/data_request/cif.

Competing interests

The authors declare no competing interests.

Footnotes

Peer review information Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary information is available for this paper at 10.1038/s41467-020-16451-x.

References

  • 1.Leroux F, Jeschke P, Schlosser M. Fluorinated ethers, thioethers, and amines: anomerically biased species. Chem. Rev. 2005;105:827–856. doi: 10.1021/cr040075b. [DOI] [PubMed] [Google Scholar]
  • 2.Shimizu M, Hiyama T. Modern synthetic methods for fluorine-substituted target molecules. Angew. Chem. Int. Ed. 2005;44:214–231. doi: 10.1002/anie.200460441. [DOI] [PubMed] [Google Scholar]
  • 3.Landelle G, Panossian A, Leroux FR. Trifluoromethyl ethers and thioethers as tools for Medicinal chemistry and drug discovery. Curr. Top. Med. Chem. 2014;14:941–951. doi: 10.2174/1568026614666140202210016. [DOI] [PubMed] [Google Scholar]
  • 4.Coric V, Krystal JH. Riluzole augmentation in treatment-resistant obsessive–compulsive disorder: an open-label trial. Biol. Psychiatry. 2005;58:424–428. doi: 10.1016/j.biopsych.2005.04.043. [DOI] [PubMed] [Google Scholar]
  • 5.Quagliato DA, Van Engen D. The synthesis and structural characterization of way-120,491; a novel potassium channel activator. Bioorg. Med. Chem. Lett. 1991;1:39–42. [Google Scholar]
  • 6.Santel, H. J. & Muller, K. H. in Brighton Crop Protection Conference: Weeds 23–28 (British Crop Protection Council, 1999).
  • 7.Barker, O. & Raoof, D. Preparation of triazine-oxadiazoles for the treatment of chronic pain. Lows (Novartis Ag) WO2012035023 (2012).
  • 8.Tlili A, Toulgoat F, Billard T. Synthetic approaches to trifluoromethoxy-substituted compounds. Angew. Chem. Int. Ed. 2016;55:11726–11735. doi: 10.1002/anie.201603697. [DOI] [PubMed] [Google Scholar]
  • 9.Besset T, Jubault P, Pannecoucke X, Poisson T. New entries toward the synthesis of OCF3-containing molecules. Org. Chem. Front. 2016;3:1004–1010. [Google Scholar]
  • 10.Lee KN, Lee JW, Ngai MY. Recent development of catalytic trifluoromethoxylation reactions. Tetrahedron. 2018;74:7127–7135. doi: 10.1016/j.tet.2018.09.020. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 11.Lee JW, Lee KN, Ngai MY. Synthesis of tri- and difluoromethoxylated compounds via visible light photoredox. Catal. Angew. Chem. Int. Ed. 2019;58:11171–11181. doi: 10.1002/anie.201902243. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 12.Hardy MA, Chachignon H, Cahard D. Advances in asymmetric di- and trifluoromethylthiolation, and di- and trifluoromethoxylation reactions. Asian J. Org. Chem. 2019;8:591–609. [Google Scholar]
  • 13.Zhang X, Tang P. Recent advances in new trifluoromethoxylation reagents. Sci. China Chem. 2019;62:525–532. [Google Scholar]
  • 14.Liu J, Xu X, Qing F. Silver-mediated oxidative trifluoromethylation of alcohols to alkyl trifluoromethyl ethers. Org. Lett. 2015;17:5048–5051. doi: 10.1021/acs.orglett.5b02522. [DOI] [PubMed] [Google Scholar]
  • 15.Chen S, et al. Aryl-BIAN-ligated silver (I) trifluoromethoxide complex. Dalton Trans. 2015;44:19682–19686. doi: 10.1039/c5dt02078f. [DOI] [PubMed] [Google Scholar]
  • 16.Chen C, Chen P, Liu G. Palladium-catalyzed intramolecular aminotrifluoromethoxylation of alkenes. J. Am. Chem. Soc. 2015;137:15648–15651. doi: 10.1021/jacs.5b10971. [DOI] [PubMed] [Google Scholar]
  • 17.Zhang Q, et al. Fluorodecarboxylation for the synthesis of trifluoromethyl aryl ethers. Angew. Chem. Int. Ed. 2016;55:9758–9762. doi: 10.1002/anie.201604793. [DOI] [PubMed] [Google Scholar]
  • 18.Zhou M, Ni C, He Z, Hu J. O-Trifluoromethylation of phenols: access to aryl trifluoromethyl ethers by O-carboxydifluoromethylation and decarboxylative fluorination. Org. Lett. 2016;18:3754–3757. doi: 10.1021/acs.orglett.6b01779. [DOI] [PubMed] [Google Scholar]
  • 19.Chatalova-Sazepin C, Jagdeo M, Boswell BR, Sammis GM. Xenon difluoride mediated fluorodecarboxylations for the syntheses of di- and trifluoromethoxyarenes. Org. Lett. 2016;18:4570–4573. doi: 10.1021/acs.orglett.6b02208. [DOI] [PubMed] [Google Scholar]
  • 20.Zha G, et al. Silver-mediated direct trifluoromethoxylation of α-diazo esters via the −OCF3 anion. Chem. Commun. 2016;52:7458–7461. doi: 10.1039/c6cc03040h. [DOI] [PubMed] [Google Scholar]
  • 21.Qi X, Chen P, Liu G. Catalytic oxidative trifluoromethoxylation of allylic C− H bonds using a palladium catalyst. Angew. Chem. Int. Ed. 2017;56:9517–9521. doi: 10.1002/anie.201703841. [DOI] [PubMed] [Google Scholar]
  • 22.Huang W, Wan X, Shen Q. Enantioselective construction of trifluoromethoxylated stereogenic centers by a nickel-catalyzed asymmetric Suzuki-Miyaura coupling of secondary benzyl bromides. Angew. Chem. Int. Ed. 2017;56:11986–11989. doi: 10.1002/anie.201706868. [DOI] [PubMed] [Google Scholar]
  • 23.Jiang X, Deng Z, Tang P. Direct dehydroxytrifluoromethoxylation of alcohols. Angew. Chem. Int. Ed. 2018;57:292–301. doi: 10.1002/anie.201711050. [DOI] [PubMed] [Google Scholar]
  • 24.Liu J, Wei Y, Tang P. Cobalt-catalyzed trifluoromethoxylation of epoxide. J. Am. Chem. Soc. 2018;140:15194–15199. doi: 10.1021/jacs.8b10298. [DOI] [PubMed] [Google Scholar]
  • 25.Chen C, et al. Palladium-catalyzed intermolecular ditrifluoromethoxylation of unactivated alkenes: CF3O-palladation initiated by Pd (IV) J. Am. Chem. Soc. 2018;140:1207–1210. doi: 10.1021/jacs.7b11470. [DOI] [PubMed] [Google Scholar]
  • 26.Zhou M, Ni C, Zeng Y, Hu J. Trifluoromethyl benzoate: a versatile trifluoromethoxylation reagent. J. Am. Chem. Soc. 2018;140:6801–6805. doi: 10.1021/jacs.8b04000. [DOI] [PubMed] [Google Scholar]
  • 27.Chen C, Pflüger PM, Chen P, Liu G. Palladium (II)-catalyzed enantioselective aminotrifluoromethoxylation of unactivated alkenes using CsOCF3 as a trifluoromethoxide source. Angew. Chem. Int. Ed. 2019;58:2392–2396. doi: 10.1002/anie.201813591. [DOI] [PubMed] [Google Scholar]
  • 28.Chen D, Lu L, Shen Q. [Ag(bpy)(PPhtBu2)(OCF3)]: a stable nucleophilic reagent for chemoselective and stereospecific trifluoromethoxylation of secondary alkyl nosylates. Org. Chem. Front. 2019;6:1801–1806. [Google Scholar]
  • 29.Lei M, et al. Trifluoromethyl aryl sulfonates (TFMS): an applicable trifluoromethoxylation reagent. Tetrahedron lett. 2019;60:1389–1392. [Google Scholar]
  • 30.Yu J, Lin J, Yu D, Du R, Xiao J. Oxidation of difluorocarbene and subsequent trifluoromethoxylation. Nat. Commun. 2019;10:5362. doi: 10.1038/s41467-019-13359-z. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 31.Li Y, Yang Y, Xin J, Tang P. Nucleophilic trifluoromethoxylation of alkyl halides without silver. Nat. Commun. 2020;11:755. doi: 10.1038/s41467-020-14598-1. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 32.Chen C, Hou C, Chen P, Liu G. Palladium(II)-catalyzed aminotrifluoromethoxylation of alkenes: mechanistic insight into the effect of N-protecting groups. Chin. J. Chem. 2020;38:346–350. [Google Scholar]
  • 33.Sheppard WA. α-Fluorinated ethers. I. Aryl fluoroalkyl ethers. J. Org. Chem. 1964;29:1–11. [Google Scholar]
  • 34.Feiring AE. Chemistry in hydrogen fluoride. 7. A novel synthesis of aryl trifluoromethyl ethers. J. Org. Chem. 1979;44:2907–2910. [Google Scholar]
  • 35.Kuroboshi M, Suzuki K, Hiyama T. Oxidative desulfurization-fluorination of xanthates. A convenient synthesis of trifluoromethyl ethers and difluoro (methylthio) methyl ethers. Tetrahedron Lett. 1992;33:4173–4176. [Google Scholar]
  • 36.Salome J, Mauger C, Brunet S, Schanen V. Synthesis conditions and activity of various Lewis acids for the fluorination of trichloromethoxy-benzene by HF in liquid phase. J. Fluor. Chem. 2004;125:1947–1958. [Google Scholar]
  • 37.Leroux F, Jeschke P, Schlosser M. α-Fluorinated ethers, thioethers, and amines: anomerically biased species. Chem. Rev. 2005;105:827–856. doi: 10.1021/cr040075b. [DOI] [PubMed] [Google Scholar]
  • 38.Stanek K, Koller R, Togni A. Reactivity of a 10-I-3 hypervalent iodine trifluoromethylation reagent with phenols. J. Org. Chem. 2008;73:7678–7685. doi: 10.1021/jo8014825. [DOI] [PubMed] [Google Scholar]
  • 39.Liang A, Han S, Zou D, Wu Y. Regioselective synthesis of N-heteroaromatic trifluoromethoxy compounds by direct O-CF3 bond formation. Chem. Eur. J. 2016;22:5102–5106. doi: 10.1002/chem.201505181. [DOI] [PubMed] [Google Scholar]
  • 40.Umemoto T, Adachi K, Ishihara S. CF3 oxonium salts, O-(Trifluoromethyl)dibenzofuranium salts: in situ synthesis, properties, and application as a real CF3+ species reagent. J. Org. Chem. 2007;72:6905–6917. doi: 10.1021/jo070896r. [DOI] [PubMed] [Google Scholar]
  • 41.Hojczyk KN, Zhan C, Ngai MY. Trifluoromethoxylation of arenes: synthesis of ortho-trifluoromethoxylated aniline derivatives by OCF3 migration. Angew. Chem. Int. Ed. 2014;53:14559–14563. doi: 10.1002/anie.201409375. [DOI] [PubMed] [Google Scholar]
  • 42.Feng P, Lee KN, Zhan C, Ngai MY. Access to a new class of synthetic building blocks via trifluoromethoxylation of pyridines and pyrimidines. Chem. Sci. 2016;7:424–429. doi: 10.1039/c5sc02983j. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 43.Liu J, et al. Silver-mediated oxidative trifluoromethylation of phenols: direct synthesis of aryl trifluoromethyl ethers. Angew. Chem. Int. Ed. 2015;54:11839–11842. doi: 10.1002/anie.201506329. [DOI] [PubMed] [Google Scholar]
  • 44.Huang C, Liang T, Harada S, Ritter T. Silver-mediated trifluoromethoxylation of aryl stannanes and arylboronic acids. J. Am. Chem. Soc. 2011;133:13308–13310. doi: 10.1021/ja204861a. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 45.Yang S, Chen M, Tang P. Visible-light photoredox-catalyzed and copper-promoted trifluoromethoxylation of arenediazonium tetrafluoroborates. Angew. Chem. Int. Ed. 2019;58:7840–7844. doi: 10.1002/anie.201901447. [DOI] [PubMed] [Google Scholar]
  • 46.Yang Y, Yao J, Yan W, Luo Z, Tang Z. Silver-mediated trifluoromethoxylation of (hetero)aryldiazonium tetrafluoroborates. Org. Lett. 2019;21:8003–8007. doi: 10.1021/acs.orglett.9b03000. [DOI] [PubMed] [Google Scholar]
  • 47.Kolomeitsev AA, Vorobyev M, Gillandt H. Versatile application of trifluoromethyl triflate. Tetrahedron Lett. 2008;49:449–454. [Google Scholar]
  • 48.Martin JC, Taylor SL. Trifluoromethyl triflate: synthesis and reactions. J. Org. Chem. 1987;52:4147–4156. [Google Scholar]
  • 49.Zhang QW, Hartwig JF. Synthesis of heteroaromatic trifluoromethyl ethers with trifluoromethyl triflate as the source of the trifluoromethoxy group. Chem. Commun. 2018;54:10124–10127. doi: 10.1039/c8cc05084h. [DOI] [PubMed] [Google Scholar]
  • 50.Zheng W, Morales-Rivera CA, Lee JW, Liu P, Ngai MY. Catalytic C-H trifluoromethoxylation of arenes and heteroarenes. Angew. Chem. Int. Ed. 2018;57:9645–9649. doi: 10.1002/anie.201800598. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 51.Jelier BJ, et al. Radical trifluoromethoxylation of arenes triggered by a visible-light-mediated N-O bond redox fragmentation. Angew. Chem. Int. Ed. 2018;57:13784–13789. doi: 10.1002/anie.201806296. [DOI] [PubMed] [Google Scholar]
  • 52.Zheng W, Lee JW, Morales-Rivera CA, Liu P, Ngai MY. Redox-active reagents for photocatalytic generation of the OCF3 radical and (hetero) aryl C-H trifluoromethoxylation. Angew. Chem. Int. Ed. 2018;57:13795–13799. doi: 10.1002/anie.201808495. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 53.Guo S, Cong F, Guo R, Wang L, Tang P. Asymmetric silver-catalysed intermolecular bromotrifluoromethoxylation of alkenes with a new trifluoromethoxylation reagent. Nat. Chem. 2017;9:546–551. doi: 10.1038/nchem.2711. [DOI] [PubMed] [Google Scholar]
  • 54.Yang H, et al. Silver-promoted oxidative benzylic C-H trifluoromethoxylation. Angew. Chem. Int. Ed. 2018;57:13266–13270. doi: 10.1002/anie.201807144. [DOI] [PubMed] [Google Scholar]
  • 55.Wang F, Xu P, Cong F, Tang P. Silver-mediated oxidative functionalization of alkylsilanes. Chem. Sci. 2018;9:8836–8841. doi: 10.1039/c8sc03730b. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 56.Stavber S, Zupan M. SelectfluorTM F-TEDA-BF4 as a versatile mediator or catalyst in organic chemistry. Acta Chim. Slov. 2005;52:13–26. [Google Scholar]
  • 57.Leszczynski PJ, Grochala W. Strong cationic oxidizers: thermal decomposition, electronic structure and magnetism of their compounds. Acta Chim. Slov. 2013;60:455–470. [PubMed] [Google Scholar]
  • 58.Fier PS, Hartwig JF. Selective C-H fluorination of pyridines and diazines inspired by a classic amination reaction. Science. 2013;342:956–960. doi: 10.1126/science.1243759. [DOI] [PubMed] [Google Scholar]
  • 59.Po HN. Heterocyclic and macrocyclic amine complexes of silver(II) and silver(III) Coord. Chem. Rev. 1976;20:171–195. [Google Scholar]
  • 60.Oliver EW, Evans DHJ. Electrochemical studies of six N-F electrophilic fluorinating reagents. J. Electroanal. Chem. 1999;474:1–8. [Google Scholar]
  • 61.Pitts CR, Lectka T. Direct, catalytic monofluorination of sp3 C−H bonds: a radical based mechanism with ionic selectivity. J. Am. Chem. Soc. 2014;136:9780–9791. doi: 10.1021/ja505136j. [DOI] [PubMed] [Google Scholar]
  • 62.Li Z, Wang Z, Zhu L, Li C. Silver-catalyzed radical fluorination of alkylboronates in aqueous solution. J. Am. Chem. Soc. 2014;136:16439–16443. doi: 10.1021/ja509548z. [DOI] [PubMed] [Google Scholar]
  • 63.Fier PS, Hartwig JF. Synthesis and late-stage functionalization of complex molecules through C−H fluorination and nucleophilic aromatic substitution. J. Am. Chem. Soc. 2014;136:10139–10147. doi: 10.1021/ja5049303. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 64.Minisci F, Vismara E, Fontana F. Recent developments of free-radical substitutions of heteroaromatic bases. Heterocycles. 1989;28:489–519. [Google Scholar]
  • 65.Hara FO, Blackmond DG, Baran PS. Radical-based regioselective C–H functionalization of electron-deficient heteroarenes: scope, tunability, and predictability. J. Am. Chem. Soc. 2013;135:12122–12134. doi: 10.1021/ja406223k. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 66.Fujiwara Y, et al. Practical and innate carbon–hydrogen functionalization of heterocycles. Nature. 2012;492:95–99. doi: 10.1038/nature11680. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 67.Nagib DA, MacMillan DWC. Trifluoromethylation of arenes and heteroarenes by means of photoredox catalysis. Nature. 2011;480:224–228. doi: 10.1038/nature10647. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 68.Ye Y, Lee SH, Sanford MS. Silver-mediated trifluoromethylation of arenes using TMSCF3. Org. Lett. 2011;13:5464–5467. doi: 10.1021/ol202174a. [DOI] [PMC free article] [PubMed] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

Supplementary Information (15.2MB, pdf)

Data Availability Statement

The authors declare that the data supporting this study are available within the article and Supplementary Information files. The X-ray crystallographic coordinates for compounds (4kk, 4ss) reported in this study have been deposited at the Cambridge Crystallographic Data Centre (CCDC), under deposition numbers 1954409 and 1954410. These data can be obtained free of charge from The Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/data_request/cif.

Articles from Nature Communications are provided here courtesy of Nature Publishing Group

RESOURCES