Skip to main content
Springer logoLink to Springer
. 2019 Nov 4;374(2):1125–1178. doi: 10.1007/s00220-019-03601-6

Asymptotic Properties of Linear Field Equations in Anti-de Sitter Space

Gustav Holzegel 1, Jonathan Luk 2, Jacques Smulevici 3, Claude Warnick 4,
PMCID: PMC7336248  PMID: 32675827

Abstract

We study the global dynamics of the wave equation, Maxwell’s equation and the linearized Bianchi equations on a fixed anti-de Sitter (AdS) background. Provided dissipative boundary conditions are imposed on the dynamical fields we prove uniform boundedness of the natural energy as well as both degenerate (near the AdS boundary) and non-degenerate integrated decay estimates. Remarkably, the non-degenerate estimates “lose a derivative”. We relate this loss to a trapping phenomenon near the AdS boundary, which itself originates from the properties of (approximately) gliding rays near the boundary. Using the Gaussian beam approximation we prove that non-degenerate energy decay without loss of derivatives does not hold. As a consequence of the non-degenerate integrated decay estimates, we also obtain pointwise-in-time decay estimates for the energy. Our paper provides the key estimates for a proof of the non-linear stability of the anti-de Sitter spacetime under dissipative boundary conditions. Finally, we contrast our results with the case of reflecting boundary conditions.

Introduction

The non-linear Einstein vacuum equations with cosmological constant Λ,

Ricg=Λg, 1

constitute a complicated coupled quasi-linear hyperbolic system of partial differential equations for a Lorentzian metric g. The past few decades have seen fundamental progress in understanding the global dynamics of solutions to (1). In particular, a satisfactory answer – asymptotic stability – has been given for the dynamics of (1) with Λ=0 near Minkowski space [1]; the dynamics of (1) with Λ>0 near de Sitter space [2, 3], the maximally symmetric solution of (1) with Λ>0; as well as for the (Λ>0) Kerr-dS black hole spacetimes [4]. Today, the dynamics near black hole solutions of (1) for Λ=0 is a subject of intense investigation [5, 6], with the current state-of-the-art being the results in [7] establishing the linear stability of Schwarzschild, and [8] establishing nonlinear stability for Schwarzschild within a restricted symmetry class.

In contrast to the above, the global dynamics of (1) with Λ<0 near anti-de Sitter space (AdS), the maximally symmetric solution of the vacuum Einstein equations with Λ<0, is mostly unknown. Part of the problem is that in the case of Λ<0, the PDE problem associated with (1) takes the form of an initial boundary value problem. Therefore, even to construct local in time solutions, one needs to understand what appropriate (well-posed, geometric) boundary conditions are. It also suggests that the global behaviour of solutions starting initially close to the anti-de Sitter geometry may depend crucially on the choice of these boundary conditions [9, 10].

Using his conformal field equations, Friedrich [10] constructed local in time solutions to (1) with Λ<0. (See also [11] for a recent proof for Dirichlet conditions using harmonic gauge.) While in general it is quite intricate to isolate the geometric content inherent in the boundary conditions imposed (partly due to the large gauge freedom present in the problem), there is nevertheless a “conformal” piece of boundary data that does admit a physical interpretation. This goes back to the Bianchi equations,

gaWabcd=0, 2

satisfied by the Weyl-tensor of a metric g satisfying (1). As is well known [1], the equations (2) can be used to estimate the curvature components of a dynamical metric g. The boundary data required for well-posed evolution of (2) will generally imply a condition on the energy-flux of curvature through the timelike boundary. Two “extreme” cases seem particularly natural and interesting: The case when this flux vanishes, corresponding to reflecting (Dirichlet or Neumann) conditions, and the case when this flux is “as large as possible”, corresponding to “optimally dissipative” conditions. While any such boundary data for (2) will have to be complemented with other data (essentially the choice of a boundary defining function and various gauge choices) to estimate the full spacetime metric [9], it is nevertheless reasonable, in view of the strong non-linearities appearing in the Einstein equations, to conjecture the following loose statement for the global dynamics of perturbations of AdS under the above “extreme” cases of boundary conditions:

Conjecture 1

Anti-de Sitter spacetime is non-linearly unstable for reflecting and asymptotically stable for optimally dissipative boundary conditions.

The instability part of Conjecture 1 was first made in [12, 13] in connection with work on five-dimensional gravitational solitons. See also [14]. By now there exist many refined versions of this part of the conjecture as well as strong heuristic and numerical support in its favour [1517]. In a series of papers [1820], Moschidis has considered the stability problem for the AdS spacetime within spherical symmetry, in the presence of null dust or massless Vlasov matter, culminating in a proof of the instability of AdS for the Einstein–Massless Vlasov system in [21].

The present paper is the first of a series of papers establishing the stability part of Conjecture 1. Here we contribute the first fundamental ingredient, namely robust decay estimates for the associated linear problem. Our interest in the case of dissipative boundary conditions in part goes back to the original work of Friedrich in [10], which establishes that local well posedness does not single out a preferred boundary condition at null infinity. It is then reasonable to ask how questions of global existence depend on the choice of boundary condition. We also observe that to date the only solutions to the vacuum Einstein equations (regardless of boundary conditions) which are future-complete are necessarily stationary. See for example [22] for general constructions of such spacetimes. A positive resolution of the stability part of Conjecture 1 would necessarily imply the existence of truly dynamical, future-complete, solutions to (1).

Linear field equations on AdS

An important prerequisite for any non-linear stability result is that the associated linear problem is robustly controlled [23]. In the present (dissipative) context, this means that the mechanisms and obstructions for the decay of linear waves in the fixed AdS geometry should be understood and decay estimates with constants depending on the initial data available. We accomplish this by giving a complete description of the decay properties of three fundamental field equations of mathematical physics:

  • (W)
    The conformal wave equation for a scalar function on the AdS manifold,1
    gAdSu+2u=0. 3
  • (M)
    Maxwell’s equations for a two-form F on the AdS manifold,
    dF=0anddgAdSF=0. 4
  • (B)
    The Bianchi equations for a Weyl field W (see Definition 1 below) on the AdS manifold
    gAdSaWabcd=0. 5

Note that since AdS is conformally flat, equation (5) is precisely the linearization of the full non-linear Bianchi equations (2) with respect to the anti-de Sitter metric.

The models (W), (M), and (B) will be accompanied by dissipative boundary conditions. In general, to even state the latter, one requires a choice of boundary defining function for AdS and a choice of timelike vectorfield (or, alternatively, the choice of an outgoing null-vector) at each point of the AdS boundary. For us, it is easiest to state these conditions in coordinates which suggest a canonical choice for both these vectors. We write the AdS metric in spherical polar coordinates on R4, where it takes the simple familiar form

gAdS=-1+r2dt2+1+r2-1dr2+r2dΩS22, 6

with the asymptotic boundary corresponding to the timelike hypersurface “r=”.2 Note that 1 / r is a boundary defining function and that

graphic file with name 220_2019_3601_Equ230_HTML.gif

with Inline graphic (A=1,2) an orthonormal frame on the sphere of radius r defines an orthonormal frame for AdS. Finally, the vector t singles out a preferred timelike direction.

In the case of the wave equation, the optimally dissipative boundary condition can then be stated as

(ru)t+r2(ru)r0,asr. 7

Note that t+1+r2r is an outgoing null-vector. See also Sect. 4.1.

In the case of Maxwell’s equations, we define the electric and magnetic field Ei=Fe0,ei and Hi=gAdSFe0,ei respectively. Here gAdS is the Hodge dual with respect to the AdS metric. The dissipative boundary condition then takes the form

r2EA+ϵABHB0,asr, 8

which means that the Poynting vector points outwards, allowing energy to leave the spacetime.

Finally, in the case of the Bianchi equations, we define the electric and magnetic part of the Weyl tensor EAB=We0,eA,e0,eB and HAB=gAdSWe0,eA,e0,eB respectively. Introducing the trace-free part of EAB as E^AB=EAB-12δABECC and similarly for HAB, the dissipative boundary conditions can then be expressed as:

r3E^AB+ϵ(ACH^B)C0,asr. 9

Interpreting the Bianchi equations as a linearisation of the full vacuum Einstein equations, we can understand these boundary conditions in terms of the metric perturbations as implying a relation between the Cotton-York tensor of the conformal metric on I and the “stress-energy tensor” of the boundary.3

That the above boundary conditions are indeed correct, naturally dissipative, boundary conditions leading to a well-posed boundary initial value problem will be a result of the energy identity. While this is almost immediate in the case of the wave equation and Maxwell’s equations, we will spend a considerable amount of time on the “derivation” of (9) in the Bianchi case, see Sect. 4.3.

Note that we could consider a more general Klein-Gordon equation than (W):

gAdSu+au=0. 10

Here the boundary behaviour of u is more complicated [24], but a well posedness theory with dissipative boundary conditions is still available [25] for a in a certain range. We restrict attention to the case a=2 for two reasons. Firstly, for this choice of a the equation has much in common with the systems (M), (B), owing to their shared conformal invariance. This is the correct ‘toy model’ for the Einstein equations. Secondly, the problem appears to be considerably more challenging for a2. In particular, it does not appear that the methods of this paper can be directly applied, even once allowance is made using the formalism of [24] for the more complicated boundary behaviour of solutions.

The main theorems

We now turn to the results.

Theorem 1.1

Let one of the following hold

  • (W)
    Ψ is a scalar function and a smooth solution of (3) subject to dissipative boundary condition (7). We associate with Ψ the energy density
    graphic file with name 220_2019_3601_Equ231_HTML.gif
  • (M)
    Ψ is a Maxwell-two-form and a smooth solution of (4) subject to dissipative boundary conditions (8). We associate with Ψ the energy density
    εΨ=1+r2|E|2+|H|2
    where E and H denote the electric and magnetic part of Ψ respectively.
  • (B)
    Ψ is a Weyl-field and a smooth solution of (5) subject to dissipative boundary conditions (9). We associate with Ψ the energy density
    εΨ=1+r232|E|2+|H|2
    where E and H denote the electric and magnetic part of the Weyl-field respectively.

Then we have the following estimates

  1. Uniform Boundedness: For any 0<T< we have
    ΣTεΨ1+r2r2drdωΣ0εΨ1+r2r2drdω,
    where the implicit constant is independent of T.
  2. Degenerate (near infinity) integrated decay without derivative loss:
    0dtΣtε[Ψ]1+r2r2drdωΣ0εΨ1+r2r2drdω.
  3. Non-degenerate (near infinity) integrated decay with derivative loss:
    0dtΣtε[Ψ]1+r2r2drdωΣ0εΨ+εtΨ1+r2r2drdω.

Remark 1

Similar statements hold for higher order energies by commuting with t and doing elliptic estimates. As this is standard we omit the details.

Corollary 1.2

(Uniform decay). Under the assumptions of the previous theorem the following uniform-in-time decay estimate holds for any integer n1

ΣtεΨ1+r2r2drdω11+tnΣ0εΨ+εtΨ++εtnΨ1+r2r2drdω.

What is remarkable about the above theorem is that the derivative loss occurring in (3) allows one to achieve integrated decay of the energy without loss in the asymptotic weight r. While it is likely that more refined methods can reduce the loss of a full derivative in (3), we shall however establish that some loss is necessary and in fact reflects a fundamental property of the hyberbolic equations on AdS: the presence of trapping at infinity.

Theorem 1.3

With the assumptions of Theorem 1.1, the term ε[tΨ] on the right hand side of estimate (3) of Theorem 1.1 is necessary: The estimate fails (for general solutions) if it is dropped.

We will prove Theorem 1.3 only for the case of the wave equation (W), see (45) and Corollary 5.8. The proof is based on the Gaussian beam approximation for the wave equation.4 In particular, we construct a solution of the conformal wave equation in AdS which contradicts estimate (3) of Theorem 1.1 without the ε[tΨ]-term on the right hand side. Similar constructions can be given for the Maxwell and the Bianchi case.5

Overview of the proof of Theorem 1.1 and main difficulties

The proof of Theorem 1.1 is a straightforward application of the vectorfield method once certain difficulties have been overcome. Let us begin by discussing the proof in case of the wave- (W) and Maxwell’s equation (M) as it is conceptually easier.

In the case of (W) and (M), statement (1) follows immediately from integration of the divergence identity aTabtb=0 with T being the energy momentum tensor of the scalar or Maxwell field respectively. In addition, in view of the dissipative condition, this estimate gives control over certain derivatives of u (certain components of the Maxwell field, namely EA and HA) integrated along the boundary.

The statement (2) of the main theorem is then obtained by constructing a vectorfield X (see (17)) which is almost conformally Killing near infinity. The key observations are that firstly, the right hand side of the associated divergence identity aTabXb=Xπ·T controls all derivatives of u in the wave equation case (components of F in the Maxwell case). Secondly, when integrating this divergence identity, the terms appearing on the boundary at infinity come either with good signs (angular derivatives in the case of the wave equation, Er¯ and Hr¯ components in the Maxwell case) or are components already under control from the previous Tabtb-estimate. The integrated decay estimate thus obtained comes with a natural degeneration in the r-weight, as manifest in the estimate (2) of Theorem 1.1.

To remove this degeneration we first note that in view of the fact that the vectorfield t is Killing, the estimates (1) and (2) also hold for the t-commuted equations. In the case of the wave equation, controlling ttψ in L2 on spacelike slices implies an estimate for all spatial derivatives of ψ through an elliptic estimate. The crucial point here is that weighted estimates are required. Similarly, one can write Maxwell’s equation as a three-dimensional div-curl-system with the time derivatives of E and H on the right hand side. Again the crucial point is that weighted elliptic estimates are needed to prove the desired results.

Once all (spatial) derivatives are controlled in a weighted L2 sense on spacelike slices one can invoke Hardy inequalities to improve the weight in the lower order terms and remove the degeneration in the estimate (2).

For the case of the spin 2 equations (B), the proof follows a similar structure. However, the divergence identity for the Bel-Robinson tensor (the analogue of the energy momentum tensor in cases (W) and (M)) alone will not generate the estimate (1). In fact, the term appearing on the boundary after integration does not have a sign unless one imposes an additional boundary condition! On the other hand, one can show (by proving energy estimates for a reduced system of equations, see Sect. 4.3.1) that the boundary conditions (9) already uniquely determine the solution.6 The resolution is that in the case of the Bianchi equations one needs to prove (1) and (2) at the same time: Contracting the Bel-Robinson tensor with a suitable combination of the vectorfields t and X ensures that the boundary term on null-infinity does have a favorable sign and so does the spacetime-term in the interior. Once (1) and (2) are established, (3) follows from doing elliptic estimates for the reduced system of Bianchi equations similar to the Maxwell case (M).

Remarks on Theorem 1.1

The estimates of Theorem 1.1 remain true for a class of Ck perturbations of AdS which preserve the general properties of the deformation tensor of the timelike vectorfield 3t+X, cf. the proof of Proposition 5.6. This includes perturbations which may be dynamical. This fact is of course key for the non-linear problem [27].

The estimates of Theorem 1.1 are stable towards perturbations of the optimally dissipative boundary conditions. In the cases of (W) and (M) one can in fact establish these estimates for any (however small) uniform dissipation at the boundary, cf. Sect. 6. Whether this is possible also in case of (B) is an open problem and (if true) will require a refinement of our techniques. In Sect. 6.2 we discuss the case of Dirichlet conditions for (B) which fix the conformal class of the induced metric at infinity to linear order. The Dirichlet boundary conditions may be thought of as a limit of dissipative conditions in which the dissipation vanishes. We outline a proof of boundedness for solutions of the Bianchi equations in this setting. We also briefly discuss the relation of our work to the Teukolsky formalism in Sect. 6.3, and argue that the proposed boundary conditions of [28] may not lead to a well posed dynamical problem. We state a set of boundary conditions for the Teukolsky formulation that does lead to a well posed dynamical problem.

Finally, one may wonder whether and how the derivative loss in Theorem 1.1 manifests itself in the non-linear stability problem. In ongoing work [27], we shall see that the degeneration is sufficiently weak in the sense that the degenerate estimate (2) will be sufficient to deal with the non-linear error-terms.

Main ideas for the proof of Theorem 1.3

In order to better understand both the geometry of AdS and the derivative loss occurring in (3) of Theorem 1.1, it is useful to invoke the conformal properties of AdS and the conformal wave equation (3). Setting r=tanψ with ψ0,π2 one finds from (3)

gAdS=1cos2ψ-dt2+dψ2+sin2ψdΩS22=:1cos2ψgE, 11

and hence that AdS is conformal to a part of the Einstein cylinder, namely R×Sh3R×S3, where Sh3 denotes a hemisphere of S3 with ψ=π2 being its equatorial boundary. The wave equation (3) is called conformal or conformally invariant because if u is a solution of (3), then v:=Ωu is a solution of a wave equation with respect to the conformally transformed metric g=Ω2gAdS. This suggests that understanding the dynamics of (3) for gAdS is essentially equivalent to that of understanding solutions of

gEv-v=0 12

on one hemisphere of the Einstein cylinder. This latter is a finite problem, which we will refer to as Problem 1 below.

  1. Problem 1: The wave equation (12) on Rt×Sh3 (with the natural product metric of the Einstein cylinder) where Sh3 is the (say northern) hemisphere of the 3-sphere S3 with boundary at ψ=π2, where (say optimally) dissipative boundary conditions are imposed. We contrast this problem with

  2. Problem 2: the wave equation (3) on Rt×B3 (with the flat metric) where B3 is the unit ball with boundary S2 where dissipative boundary conditions are imposed.

For Problem 2 it is well-known that exponential decay of energy holds without loss of derivatives, see [2931]. (It is an entertaining exercise to prove this in a more robust fashion using the methods of this paper.) For Problem 1, however, there will be a derivative loss present in any decay estimate, as seen in Theorem 1.1.7

This phenomenon can be explained in the geometric optics approximation for the wave equation. Recall that in this picture, the optimally dissipative boundary condition says that the energy of a ray is fully absorbed if it hits the boundary orthogonally. For rays which graze the boundary, the fraction of the energy that is absorbed upon reflection depends on the glancing angle: the shallower the incident angle, the less energy is lost in the reflection.

Now let us fix a (large) time interval 0,T for both Problem 1 and Problem 2. To construct a solution which decays very slowly, we would like to identify rays which a) hit the boundary as little as possible and b) if they do hit the boundary, they should do this at a very shallow angle (grazing rays).

What happens in Problem 2, is that the shallower one chooses the angle of the ray, the more reflections will take place in 0,T. This is easily seen by looking at the projection of the null rays to the surface t=0 (see figure).

graphic file with name 220_2019_3601_Equ232_HTML.gif

In sharp contrast, for Problem 1, the time until a null geodesic will meet the boundary again after reflection does not depend on the incident angle! This goes back to the fact that all geodesics emanating from point on the three sphere refocus at the antipodal point. As a consequence, in Problem 1 we can keep the number of reflections in 0,T fixed while choosing the incident angle as small as we like. This observation is at the heart of the Gaussian beam approximation invoked to prove Theorem 1.3.

Structure of the paper

We conclude this introduction providing the structure of the paper. In Sect. 2 we define the coordinate systems, frames and basic vectorfields which we are going to employ. Section 3 introduces the field equations of spin 0, 1 and 2 fields, together with their energy momentum tensors. The well-posedness under dissipative boundary conditions for each of these equations is discussed in Sect. 4 with particular emphasis on the importance of the reduced system in the spin 2 case. Section 5 is at the heart of the paper proving the global results of Theorem 1.1, first for the spin 0 (Sect. 5.1), then the spin 1 (Sect. 5.2) and finally the spin 2 case (Sect. 5.3). Corollary 1.2 is proven in Sect. 5.4 and Theorem 1.3 in Sect. 5.5. We conclude the paper outlining generalizations of our result. Some elementary computations have been relegated to the appendix.

Preliminaries

Coordinates, Frames and Volume forms

We will consider the so-called “global” anti-de Sitter space-time, defined on R4, with metric (in polar coordinates)

gAdS=-1+r2dt2+dr21+r2+r2dΩS22 13

with dΩS22 the standard round metric on the unit sphere. As long as there is no risk of confusion, we will also denote the metric by g. It will be convenient to introduce an orthonormal basis {ea}:

graphic file with name 220_2019_3601_Equ14_HTML.gif 14

for A=1,2, where Inline graphic are an orthonormal basis for the round sphere8 of radius r. Throughout this paper, we will use capital Latin letters for indices on the sphere while small Latin letters are reserved as spacetime indices. The dual basis of vector fields is denoted {ea}:

graphic file with name 220_2019_3601_Equ15_HTML.gif 15

We introduce the surfaces ΣT={t=T} and Σ~R[T1,T2]={r=R,T1tT2}, which have respective unit normals:

n:=e0,m:=er¯.

The surface measures on these surfaces are

dSΣT=r21+r2drdω,dSΣR=r21+r2dtdω

with dω the volume form of the round unit sphere. We denote by S[T1,T2]:={T1tT2} the spacetime slab between ΣT1 and ΣT2. Finally, the spacetime volume form is

dη=r2dtdrdω.

Vectorfields

The global anti-de Sitter spacetime enjoys the property of being static. The Killing field

T:=t=1+r2e0 16

is everywhere timelike, and orthogonal to the surfaces of constant t.

Besides the Killing field T, we will exploit the properties of the vectorfield

X:=r1+r2r=rer¯. 17

While the vectorfield X is not Killing, it is almost conformally Killing near infinity. More importantly, it generates terms with a definite sign. To see this, note that

Xπ:=12LXg=(e0)21+r2+g1+r2. 18

In particular, contracting Xπ with a symmetric traceless tensor T will only see the first term and this contraction will in fact have a sign if T satisfies the dominant energy condition.

Differential operators

Throughout this paper, we will use to denote the Levi-Civita connection of g. Define also g as the standard Laplace-Beltrami operator:

gu:=aau.

The divergence theorem

We denote by Div the spacetime divergence associated to the metric g for a vector field. In coordinates, it takes the following form:

If K=K0e0+Kr¯er¯+KAeA, then

graphic file with name 220_2019_3601_Equ19_HTML.gif 19

It will be useful to record the following form of the divergence theorem:

Lemma 2.1

(Divergence theorem). Suppose that K is a suitably regular vector field defined on R4. Then we have

0=ΣT2KanadSΣT2-ΣT1KanadSΣT1-limrΣ~r[T1,T2]KamadSΣ~r+S[T1,T2]DivKdη.

The Field Equations

Spin 0: The wave equation

The conformal wave equation on AdS is

gAdSu+2u=0. 20

A key object to study the dynamics of (20) is the twisted, or renormalised energy-momentum tensor. See [24, 32] for further details on the following construction. We first define the twisted covariant derivative9 by:

~a(·):=11+r2a·1+r2.

With this derivative we construct the twisted energy momentum tensor

Tab[u]=~au~bu-12gab~cu~cu+u21+r2, 21

which satisfies

aTab[u]=gu+2u~bu-Tcc~b1. 22

If K is any vector field then we can define the current

KJa[u]=Tab[u]Kb, 23

which is a compatible current in the sense of Christodoulou [33]. Moreover, if K is Killing and K(r)=0, then Ka~a1=0 and we can see that KJ[u] is a conserved current when u solves the conformal wave equation (20).

Spin 1: Maxwell’s equations

The Maxwell equations in vacuum are given by the following first order differential equations for a 2-form F on R4:

dF=0,dgF=0.

We decompose the Maxwell 2-form as:

F=Er¯e0er¯+EAe0eA+Hr¯e1e2+HAϵABeBer¯, 24

where ϵAB is the volume form on the sphere.10 The dual Maxwell 2-form is:

gF=Hr¯e0er¯+HAe0eA-Er¯e1e2-EAϵABeBer¯.

We will use the notation Ei with i=r¯,1,2, and similarly for H. Since F is a smooth 2-form, and the basis vectors eμ are bounded (but not continuous) at the origin, we deduce that the functions Ei, Hi are bounded, but not necessarily continuous, at r=0. With respect to this decomposition, Maxwell’s vacuum equations (3.2) split into six evolution equations:

graphic file with name 220_2019_3601_Equ25_HTML.gif 25
graphic file with name 220_2019_3601_Equ26_HTML.gif 26
graphic file with name 220_2019_3601_Equ27_HTML.gif 27
graphic file with name 220_2019_3601_Equ28_HTML.gif 28

and two constraints:

graphic file with name 220_2019_3601_Equ29_HTML.gif 29
graphic file with name 220_2019_3601_Equ30_HTML.gif 30

Here Inline graphic is the covariant derivative on the unit sphere, which commutes with r (note that our conventions are that Inline graphic are orthonormal vector fields on the sphere of radius r). The evolution equations (2528) form a symmetric hyperbolic system. If the evolution equations hold, and assuming sufficient differentiability, it is straightforward to verify that

Et=Ht=0,

where

graphic file with name 220_2019_3601_Equ233_HTML.gif

Thus if the constraint equations hold on the initial data surface, then they hold for all times.

The energy momentum tensor

The analogue of the energy momentum tensor (21) for the wave equation is the symmetric tensor

T[F]ab=FacFbc-14gabFcdFcd, 31

which satisfies

aT[F]ab=FbcdFdc+(F)bcd(F)dc

so that if F satisfies Maxwell’s equations, T[F] is divergence free and traceless. We define in the obvious fashion the current

KJa[F]=Tab[F]Kb 32

for any vector field K.

Spin 2: The Bianchi equations

The equations for a spin 2 field, also called the Bianchi equations, can be expressed as first order differential equations for a Weyl tensor, which is an arbitrary 4-tensor which satisfies the same symmetry properties as the Weyl curvature tensor. More precisely:

Definition 1

We say a 4-tensor W is a Weyl tensor if it satisfies:

  • i)

    Wabcd=-Wbacd=-Wabdc.

  • ii)

    Wabcd+Wacdb+Wabdc=0.

  • iii)

    Wabcd=Wcdab.

  • iv)

    Wabad=0.

The dual of a Weyl tensor is defined by (cf. [1])

Wabcd=12ϵabefWefcd=12Wabefϵefcd.

The Bianchi equations are

[aWbc]de=0, 33

which are equivalent to either of the equations

aWabcd=0, 34
aWabcd=0, 35

and for us studying (34) will be particularly convenient.

As in the case of the Maxwell equations, it is convenient to decompose the Weyl tensor based on the 3+1 splitting of space and time. In the Maxwell case, the field strength tensor F decomposes as a pair of vectors tangent to Σt. In the spin 2 case, the Weyl tensor W decomposes as pair of symmetric tensors tangent to Σt. We define:

Eab:=W0a0b=Wcadb(e0)c(e0)d, 36
Hab:=W0a0b=Wcadb(e0)c(e0)d. 37

The symmetries indeed ensure that EH are symmetric and tangent to Σt. Moreover, both E and H are necessarily trace-free. In fact, one can reconstruct the whole tensor W from the symmetric trace-free fields E, H, see [1, §7.2].

We will further decompose EH along the orthonormal frame defined in (14). To write the equations of motion in terms of E, H we consider the equations 0=aWar¯r¯0, 0=aWa(Ar¯)0 and 0=aWa(AB)0, from which we respectively find the evolution equations for E: graphic file with name 220_2019_3601_Figa_HTML.jpggraphic file with name 220_2019_3601_Figb_HTML.jpggraphic file with name 220_2019_3601_Figc_HTML.jpg From the equations 0=aWa0A0 and 0=aWa0r0 respectively we find the constraint equations: graphic file with name 220_2019_3601_Figd_HTML.jpggraphic file with name 220_2019_3601_Fige_HTML.jpg By considering the equivalent equations for W, we find that the evolution equations for H can be obtained from these by the substitution (E,H)(H,-E): graphic file with name 220_2019_3601_Figf_HTML.jpggraphic file with name 220_2019_3601_Figg_HTML.jpggraphic file with name 220_2019_3601_Figh_HTML.jpg and the constraint equations for H are: graphic file with name 220_2019_3601_Figi_HTML.jpggraphic file with name 220_2019_3601_Figj_HTML.jpg

The Bel-Robinson tensor

The spin 2 analogue of the energy momentum tensor for the Maxwell field is the Bel-Robinson tensor [1, §7.1.1]. This is defined to be

Qabcd:=WaecfWbdef+WaecfWbdef. 38

It is symmetric, trace-free on all pairs of indices and if W satisfies the Bianchi equations then

aQabcd=0. 39

We shall require the following quantitative version of the dominant energy condition for the Bel-Robinson tensor

Lemma 3.1

Suppose that t1,t2TpM are future-directed timelike unit vectors, and that -g(t1,t2)B for some B1. Then there exists a constant C>0 such that

1CB4Q(t1,t1,t1,t1)Q(ti,tj,tk,tl)CB4Q(t1,t1,t1,t1)

holds for any i,j,k,l{1,2}. Moreover, Q(t1,t1,t1,t1)0, with equality at a point p if and only if W vanishes at p.

Proof

We follow the proof of [23, Prop. 4.2]. We can pick a pair of null vectors e3,e4 with g(e3,e4)=-12 such that t1=e3+e4 and t2=be3+b-1e4 for some b1. The condition -g(t1,t2)B implies

1BbB.

As a consequence, we can write

Q(ti,tj,tk,tl)=a,b,c,d=34qijklabcdQ(ea,eb,ec,ed)

where

cB4qijklabcdcB4

for some combinatorial constants c,c which are independent of B. By [23, Prop. 4.2], all of the quantities Q(ea,eb,ec,ed) are non-negative, and so we have established the first part. For the second part, we note that, again following [23, Prop. 4.2], the quantity Q(t1,t1,t1,t1) controls all components of W.

Well Posedness

Dissipative boundary conditions

Wave equation.

For the wave equation, an analysis of solutions near to the conformal boundary leads us to expect that u has the following behaviour:

u=u+(t,xA)r+u-(t,xA)r2+O1r3asr.

The boundary condition we shall impose for (20) on anti-de Sitter space can be simply written in the form

(ru)t+r2(ru)r0,asr, 40

which is equivalent to

u+t-u-=0,onI.

Maxwell’s equations

In the Maxwell case, by (optimally) dissipative boundary conditions we understand the condition

r2EA+ϵABHB0,asr. 41

The above boundary conditions ensure that the asymptotic Poynting vector is outward directed, i.e. energy is leaving the spacetime. It effectively means that I behaves like an imperfect conductor with a surface resistance, for which the electric currents induced by the electromagnetic field dissipate energy as heat. These boundary conditions are an example of Leontovic boundary conditions [34, §87].

Bianchi equations

In the case of the Bianchi equation, by (optimally) dissipative boundary conditions we understand the condition

r3E^AB+ϵ(ACH^B)C0,asr

which is equivalent to:

r3EAB-12δABECC+ϵ(ACHB)C0,asr. 42

Notice that there are only two boundary conditions imposed (since the relevant objects appearing in the boundary term are the trace-free parts of EAB, HAB). We could choose more general dissipative boundary conditions. For simplicity we shall just consider those above, which ought in some sense to represent “optimal dissipation” at the boundary, but see §6 for generalisations.

The well-posedness statements

We now state a general well-posedness statement for each of our three models with dissipative boundary conditions. As is well-known, the key to prove these theorems is the existence of a suitable energy estimate under the boundary conditions imposed. In the Wave- and Maxwell case such an estimate is immediate. In the Bianchi case, however, there is a subtlety (discussed and resolved already in [10]). We will dedicate Sect. 4.3 to derive a local energy estimate showing that the condition (42) indeed leads to a well-posed problem.

Spin 0: The wave equation

The following result can be established either directly, or by making use of the conformal invariance of (20):

Theorem 4.1

(Well posedness for the conformal wave equation). Fix T>0. Given smooth functions u0,u1:Σ0R satisfying suitable asymptotic conditions, there exists a unique smooth u, such that:

  • i)

    u solves the conformal wave equation (20) in S[0,T].

  • ii)
    We have the estimate:
    graphic file with name 220_2019_3601_Equ234_HTML.gif
    for k,l,m=0,1, and a constant CT,u0,u1,K depending on KT and the initial data. This in particular implies a particular asymptotic behaviour for the fields.
  • iii)
    The initial conditions hold:
    ut=0=u0,utt=0=u1.
  • iv)

    Dissipative boundary conditions (40) hold.

Spin 1: Maxwell’s equations

Working either directly with (2530), or else by making use of the conformal invariance of Maxwell’s equations, it can be shown that:

Theorem 4.2

(Well posedness for Maxwell’s equations). Fix T>0. Given smooth vector fields Ei0,Hi0 satisfying the constraint equations, together with suitable asymptotic conditions, there exists a unique set of smooth vector fields: Ei(t),Hi(t), such that:

  • i)

    Ei(t),Hi(t) solve (2530) in S[0,T] and the corresponding Maxwell tensor F is a smooth 2-form on S[0,T].

  • ii)
    We have the estimate:
    graphic file with name 220_2019_3601_Equ235_HTML.gif
    for any K0, where CT,E0,H0,K depends on KT and the initial data. This in particular implies a particular asymptotic behaviour for the fields.
  • iii)
    The initial conditions hold:
    Ei(0)=Ei0,Hi(0)=Hi0.
  • iv)

    Dissipative boundary conditions (41) hold.

The asymptotic conditions on the initial data are corner conditions that come from ensuring that the initial data are compatible with the boundary conditions. It is certainly possible to construct initial data satisfying the constraints and the corner conditions to any order. We could work at finite regularity, and our results will in fact be valid with much weaker assumptions on the solutions, but for convenience it is simpler to assume the solutions are smooth.

Spin2: Bianchi equations

In the case of the Bianchi equation we can prove:

Theorem 4.3

(Well posedness for the Bianchi system). Fix T>0. Given smooth traceless symmetric 2-tensors Eab0,Hab0 on Σ0 satisfying the constraint equations, together with suitable asymptotic conditions as r, there exists a unique set of traceless symmetric 2-tensors: Eab(t),Hab(t) such that:

  • i)

    Eab(t),Hab(t) are traceless and the corresponding Weyl tensor W is a smooth 4-tensor satisfying the Bianchi equations on S[0,T].

  • ii)
    We have the asymptotic behaviour:
    graphic file with name 220_2019_3601_Equ236_HTML.gif
    as r, for any K0.
  • iii)
    The initial conditions hold:
    Eab(0)=Eab0,Hab(0)=Hab0
  • iv)

    Dissipative boundary conditions (42) hold.

We will spend the remainder of this section to derive the key-energy estimate that is behind the proof of Theorem 4.3.11

The modified system of Bianchi equations

In order to establish a well posedness theorem for the initial-boundary value problem associated to the spin 2 equations, the natural thing to do is to consider the evolution equations (Evol) as a symmetric hyperbolic12 system. Having established existence and uniqueness for this system (Step 1), one can then attempt to show that the constraints (Con) are propagated from the initial data (Step 2).

If one attempts this strategy with the equations in the form given in Sect. 3.3, one finds that Step 1 causes no problems: one can easily derive an energy estimate for the system (Evol). In fact, it is a matter of simple calculation to check that taking:

r(1+r2)32Er¯r¯×(EvolEr¯r¯)+2EAr¯×(EvolEAr¯)+EAB×(EvolEAB)+EH

and integrating over Σt with measure drdω we arrive at13

ddt12ΣtEr¯r¯2+2EAr¯2+EAB2+EHr2(1+r2)drdω=limrΣ~rΣt12ϵABEAr¯HBr¯+ϵABEACHBCr6dω. 43

Once one has an energy estimate of this kind, establishing the existence of solutions to the evolution equations under the assumption that the boundary term has a good sign is essentially straightforward. Looking at the boundary term we obtain, this suggests that boundary conditions should be imposed on both the Ar and the AB components of E (or alternatively H) at infinity. We shouldn’t be so hasty, however. Before declaring victory, we must return to look at the constraints (Step 2).

Firstly, it is simple to verify that if (Evol) hold with sufficient regularity then

0=Eaat=Haat,

so that the trace constraints on E and H are propagated by the evolution equations. Next, we turn to the differential constraints. We find that if (Evol) and the trace constraints hold, then the functions Ea,Ha defined in Sect. 3.3 satisfy the system of equations: graphic file with name 220_2019_3601_Figk_HTML.jpggraphic file with name 220_2019_3601_Figl_HTML.jpggraphic file with name 220_2019_3601_Figm_HTML.jpggraphic file with name 220_2019_3601_Fign_HTML.jpg Now, things appear to be working in our favour. This system is symmetric hyperbolic and we can check that by taking:

r2(1+r2)Er¯×(EvolEr¯)+EA×(EvolEA)+Hr¯×(EvolHr¯)+HA×(EvolHA)

and integrating over Σt with the measure drdω we can derive:

ddt12ΣtEr¯2+EA2+Hr¯2+HA2r31+r2drdω=limrΣ~rΣt12ϵABEAHBr6dω-ΣtϵABEAHBr21+r2drdω.

Here we see the problem. We have no reason a priori to expect that the boundary term on Σ~rΣt vanishes. If it did, we could infer by Gronwall’s lemma that the constraints are propagated. We conclude that the form of the propagation equations of Sect. 3.3 does not in general propagate the constraints at the boundary if boundary conditions are imposed on both EAB and EAr¯ (or HAB and HAr¯).

The modified equations

In order to resolve this issue, we have to modify the propagation equations before attempting to solve them as a symmetric hyperbolic system. In the previous calculation, the problematic boundary terms arise due to the radial derivatives appearing on the right hand side of (Evol EAr¯), (Evol HAr¯). We can remove these radial derivatives at the expense of introducing angular derivatives by using the constraint equations (Con Er¯). It is also convenient to eliminate Er¯r¯ and Hr¯r¯ from our equations using the trace constraints. Doing this, we arrive at the modified set of propagation equations: graphic file with name 220_2019_3601_Figo_HTML.jpggraphic file with name 220_2019_3601_Figp_HTML.jpggraphic file with name 220_2019_3601_Figq_HTML.jpggraphic file with name 220_2019_3601_Figr_HTML.jpg This again forms a symmetric hyperbolic system. Taking

r(1+r2)32EAr¯×(EvolEAr¯)+EAB×(EvolEAB)+EH

and integrating over Σt with measure drdω we arrive at

ddt12ΣtEAr¯2+EAB2+HAr¯2+HAB2r2(1+r2)drdω=limrΣ~rΣtϵABEACHBCr6dω+2ΣtϵABEAr¯HBr¯r(1+r2)drdω, 44

which is certainly sufficient to establish a well posedness result for the equations (Evol’), provided we choose boundary conditions such that the term on I has a sign. Notice that this will involve imposing conditions only on the EAB (or HAB) components, so this formulation of the propagation equations is clearly different to the previous one!14

Notice also that, unlike the estimate (43) for the (Evol) equations, we now have a bulk term in the energy estimate (44). For well-posedness this is no significant obstacle, but it will make establishing global decay estimates more difficult. In particular, it is no longer immediate that solutions with Dirichlet boundary conditions remain uniformly bounded globally.

Now let us consider the propagation of the constraints. We of course have to interpret the Er¯r¯ term in Er¯ as (-EAA) and similarly for Hr¯r¯. The evolution equations for the constraints take a simpler form: graphic file with name 220_2019_3601_Figs_HTML.jpggraphic file with name 220_2019_3601_Figt_HTML.jpggraphic file with name 220_2019_3601_Figu_HTML.jpggraphic file with name 220_2019_3601_Figv_HTML.jpg Now, once again this is a symmetric hyperbolic system. Taking

r2(1+r2)Er¯×(Evol'Er¯)+2EA×(Evol'EA)+Hr¯×(Evol'Hr¯)+2HA×(Evol'HA)

and integrating over Σt with the measure drdω we can derive:

ddt12ΣtEr¯2+2EA2+Hr¯2+2HA2r31+r2drdω=-2ΣtϵABEAHBr21+r2drdω.

Immediately, with Gronwall’s Lemma, we deduce that the constraints, if initially satisfied, will be satisfied for all time.

To our knowledge, identifying the above modified system as the correct formulation to prove well-posedness goes back to Friedrich’s work [10]. In particular, Theorem 4.3 above could be inferred from this paper.

Proof of the Main Theorems

Proof of Theorem 1.1 for Spin 0

The Killing field T immediately gives us a boundedness estimate:

Proposition 5.1

(Boundedness of energy). Let u be a solution of (20) subject to dissipative boundary conditions (40) as in Theorem 4.1. Define the energy to be:

graphic file with name 220_2019_3601_Equ45_HTML.gif 45

Then we have for any T1<T2:

ET2[u]+12Σ~[T1,T2]r2(tu)2+r6(~ru)2dωdt=ET1[u].

Proof

We have that

DivTJ=0.

Integrating this over S[T1,T2] we pick up terms from ΣT1,ΣT2 and Σ~[T1,T2]. A straightforward calculation shows

ΣtTJanadSΣt=Et[u].

We also find

Σ~r[T1,T2]TJamadSΣ~r=S2r2(1+r2)tu(~ru)dωdt=-12S2[r2(tu)2+r2(1+r2)2(~ru)2-t(ru)+r(1+r2)(~ru)2]dωdt.

As r, the term in braces vanishes by the boundary condition and we find

limrΣ~r[T1,T2]TJamadSΣ~r=-12Σ~[T1,T2]r2(tu)2+r6(~ru)2dωdt.

Applying Lemma 2.1, we are done.

We next show an integrated decay estimate with a loss in the weight at infinity:

Proposition 5.2

(Integrate decay estimate with loss). Let T2>T1. Suppose u is a solution of (20) subject to (40) as in Theorem 4.1. Then the estimate

graphic file with name 220_2019_3601_Equ237_HTML.gif

holds for some constant C>0, independent of T1 and T2.

Proof

We integrate a current constructed from the (renormalized) energy momentum tensor (21) and a radial vector field. The current is

JX,w1,w2a=XJa+w11+r2u~au+w2u2Xa,

where X is the radial vector field defined in (17). The proof of the theorem is a straightforward corollary of the following two Lemmas.

Lemma 5.1

We have

DivJX,w1,w2=TJ·e0-Xb~b1-1+r2+w11+r2Tcc+aw11+r2+2w2Xau~au+(1+r2)Divw21+r2X-w1(1+r2)32u2.

In particular, if we take w1=1, w2=12(1+r2)-1 then we have

DivJX,w1,w2=TJ·e0+u22(1+r2)32.

Proof

The vector field X has the deformation tensor:

Xπ=(e0)21+r2+g1+r2,

so that

DivXJ=(TJ·e0)-Xb~b1-1+r2Tcc.

We also require the observation that

1+r2a~au1+r2=(gu+2u)+u1+r2.

Thus when u solves the conformal wave equation, we have:

Divw11+r2u~au=-w11+r2Tcc+aw11+r2u~au-u2w1(1+r2)32.

Finally, we have

Div(w2u2X)=2w2uXa~au+(1+r2)Divw21+r2Xu2.

Combining these identities we have the first part of the result. We can arrange that the term proportional to Tcc vanishes by taking w1=1. The term proportional to u~au vanishes if w2=12(1+r2)-1, and the final part of the result follows from a brief calculation.

Lemma 5.2

With w1, w2 chosen as in the second part of the previous Lemma, we have:

ΣT2JX,w1,w2anadSΣT2CET2[u]CET1[u]

and

graphic file with name 220_2019_3601_Equ238_HTML.gif

Proof

We calculate

ΣtJX,w1,w2anadSΣt=-Σttu(1+r2)32r(1+r2)~ru+ur2drdω

which, after applying Cauchy-Schwarz, can certainly be controlled by the energy Et[u], which in turn is controlled by E0[u] using Theorem 5.1.

For the other surface terms, we calculate

graphic file with name 220_2019_3601_Equ239_HTML.gif

so that

graphic file with name 220_2019_3601_Equ240_HTML.gif

and the result follows since we already control the time and radial derivatives of u on the boundary by Theorem 5.1.

This concludes the proof of Proposition 5.2, and establishes the claimed degenerate integrated decay without derivative loss result.

We next improve the radial weight of the spacetime term in the integrated decay estimate, at the expense of losing a derivative.15

Proposition 5.3

(Higher order estimates). Let u be a solution of (20) subject to (40) as in Theorem 4.1. Then the estimate

graphic file with name 220_2019_3601_Equ241_HTML.gif

holds for some constant C>0, independent of T1 and T2.

Proof

Let us define, for a solution of the conformal wave equation:

graphic file with name 220_2019_3601_Equ242_HTML.gif

By commuting with T and applying Proposition 5.2, we have

S[T1,T2]Lu2r21+r2dηCET1[u]+ET1[ut]. 46

We can expand the integrand to give

graphic file with name 220_2019_3601_Equ47_HTML.gif 47

We clearly have two terms with a good sign and a cross term. To deal with the cross term, we integrate by parts twice, so that we obtain a term (with a good sign) that looks like Inline graphic and some lower order terms. More explicitly, we have

Lemma 5.3

Let K be the vector field given by

graphic file with name 220_2019_3601_Equ243_HTML.gif

Then we have

graphic file with name 220_2019_3601_Equ244_HTML.gif

Proof

See Appendix 7.1.

To prove Proposition 5.3, we simply insert (47) into (46) and handle the cross-term using Lemma 5.3. The boundary terms coming from DivK are

graphic file with name 220_2019_3601_Equ245_HTML.gif

which we control by the estimate of Proposition 5.2.

This in particular controls the term Inline graphic. Since S2 has constant positive Gauss curvature, we have the following elliptic estimates (see for instance Corollary 2.2.2.1 in [1]):

graphic file with name 220_2019_3601_Equ246_HTML.gif

from which we obtain the desired bounds for Inline graphic.

Finally, the (~rtu)2 term appearing in Proposition 5.3 is directly controlled by the T-commuted version of the estimates in Proposition 5.2.

We finally improve the weight in the spacetime term of Proposition 5.2 making use of the fact that by Proposition 5.3 we now control radial derivatives of Inline graphic and ~ru which lead to improved zeroth order terms through a Hardy inequality. This is a standard result, but for convenience we include here a proof.

Lemma 5.4

(Hardy’s inequality). Fix a0. Suppose that f:[1,)R is smooth, f(1)=0 and f(r)2r-a0 as r. Then we have the estimate

1f2r-1-adr4a21rf2r1-adr,

provided the right hand side is finite.

Proof

We write

1f2r-1-adr=1f2ddr-r-aadr=-1af2r-a1+2a1frfr-adr=2a1frfr-adr.

Here we have used f(1)=0 and the fact that limrr-a|f(r)|2=0 to discard the boundary terms. Now applying Cauchy-Schwarz, we deduce

1f2r-1-adr4a21f2r-1-adr1rf2r1-adr12,

whence the result follows.

From Lemma 5.4 we establish:

Theorem 5.1

(Full integrated decay). Let u be a smooth function such that ru is bounded. Then the estimate

graphic file with name 220_2019_3601_Equ247_HTML.gif

holds for some constant C>0 independent of T1 and T2. If, moreover, u solves (20) subject to (40), then the right-hand side may be bounded by C(ET1[u]+ET1[tu]) for some C>0 independent of T1 and T2.

Proof

By introducing a cut-off we can quickly reduce to showing that the estimate holds for u supported either on r2 or on r1. For u supported on r2, the estimate follows immediately, since the first order terms on the right hand side are comparable to those on the left hand side on any finite region. For u supported on r1, we first apply Lemma 5.4 with f=r21+r2~ru and a=1 to deduce

S[T1,T2]~ru2r2(1+r2)drdωdt4S[T1,T2]r(r21+r2~ru)2drdωdt4S[T1,T2](1+r2)~rr2~ru2drdωdt4S[T1,T2](1+r2)32~rr2~ru2drdωdt.

Similarly, applying Lemma 5.4 to f=1+r2tu with a=1 we deduce

S[T1,T2]tu2r21+r2drdωdtS[T1,T2]tu2r-2(1+r2)drdω4S[T1,T2]~r[tu]2(1+r2)drdωdt8S[T1,T2]~r[tu]2r21+r2drdωdt,

where we’ve used that u is supported on r1. A similar calculation gives the estimate for Inline graphic. Finally, making use of Propositions 5.2, 5.3, we see that if u satisfies the equation, then we can bound the right hand side in terms of ET1[u]+ET1[tu].

Combining Proposition 5.3 with Theorem 5.1 we have established the claimed non-degenerate integrated decay with derivative loss result for the wave equation.

Proof of Theorem 1.1 for Spin 1

The proof of the theorem for the Maxwell field follows a similar pattern to that of the conformal scalar field. There is a simplification owing to the fact that the energy-momentum tensor is trace-free, and the elliptic estimate takes a slightly different form.

Proposition 5.4

(Boundedness of energy). Let T2>T1. Suppose that F is a solution of Maxwell’s equations (2530), subject to the dissipative boundary conditions (41) as in Theorem 4.2. Then we have:

ΣT2E2+H2r2drdω+Σ~[T1,T2]r2EA2+r2HA2dtdω=ΣT1E2+H2r2drdω.

Proof

We apply Lemma 2.1 to the vector field JT[F]a=T[F]abTb. Consider the term on I. We have

limrΣ~r[T1,T2]TJamadSΣ~r=limrΣ~r[T1,T2]r2(1+r2)ϵABEAHBdtdω=limrΣ~r[T1,T2]r4ϵAB(-ϵACHC)HBdtdω=-limrΣ~r[T1,T2]r2HA2dtdω=-12Σ~[T1,T2]r2EA2+r2HA2dtdω.

Here we have used the dissipative boundary conditions (41). Since aTJa=0, there is no bulk term, and a simple calculation gives

ΣtTJanadSΣT2=12ΣtE2+H2r2drdω,

which completes the proof.

We next show an integrated decay estimate with a loss in the weight at infinity:

Proposition 5.5

(Integrated decay estimate with loss). Let T2>T1. Suppose that F is a solution of Maxwell’s equations (2530), subject to the dissipative boundary conditions (41) as in Theorem 4.2. Then we have:

S[T1,T2]E2+H2r21+r2drdωdt+Σ~[T1,T2]r2E2+r2H2dtdω3ΣT1E2+H2r2drdω.

Proof

We apply the divergence theorem to integrate the current XJa=TabXb over S[T1,T2]. Recalling the expression (18) for Xπ, and noting the fact that the energy-momentum tensor is traceless, we have

DivXJ=XπabTab=T001+r2+Taa1+r2=E2+H21+r2.

Now consider the flux through a spacelike surface Σt. We have

ΣtXJanadSΣt=ΣtT0r¯r31+r2drdω=ΣtϵABEAHBr31+r2drdω

so that if t[T1,T2] we have by Proposition 5.4:

ΣtXJanadSΣt12ΣtE2+H2r2drdω12ΣT1E2+H2r2drdω.

Next consider the flux through a surface of constant r. We have:

Σ~r[T1,T2]XJamadSΣ~r=Σ~r[T1,T2]Tr¯r¯r31+r2dtdω=Σ~r[T1,T2]-Er¯2-Hr¯2+EA2+HA2r31+r2dtdω

so that

limrΣ~r[T1,T2]XJamadSΣ~r-Σ~[T1,T2]r2E2+r2H2dtdω+2ΣT1E2+H2r2drdω,

where we use Proposition 5.4 to control the angular components of EH at infinity. Integrating DivXJ over S[T1,T2], applying the divergence theorem and using the estimates above for the fluxes completes the proof of the Proposition.

We next seek to improve the weight at infinity at the expense of a derivative loss. The first stage in doing this is an elliptic estimate. First note that by commuting the equations with the Killing field T we have:

S[T1,T2]tE2+tH2r21+r2drdωdt+Σ~[T1,T2]r2tE2+r2tH2dtdω 48
3ΣT1tE2+tH2r2drdω. 49

We can use the evolution equations to control the right hand side in terms of spatial derivatives in the slice ΣT1 if we choose. We will require the following Lemma:

Lemma 5.5

Let K be the vector field

graphic file with name 220_2019_3601_Equ248_HTML.gif

Then if H satisfies the constraint equation (30) we have the identity

graphic file with name 220_2019_3601_Equ249_HTML.gif

Proof

See Appendix 7.2.

Now consider the Maxwell equation (26):

graphic file with name 220_2019_3601_Equ250_HTML.gif

squaring this and multiplying by (1+r2)-12, we have

graphic file with name 220_2019_3601_Equ50_HTML.gif 50

From here we readily conclude:

Theorem 5.2

(Higher order estimates). Suppose that F is a solution of Maxwell’s equations, as in Theorem 4.2. Then there exists a constant C>0, independent of T1 and T2 such that we have

graphic file with name 220_2019_3601_Equ251_HTML.gif

Proof

We integrate the identity (50) over S[T1,T2]. We control the left hand side by the time commuted integrated decay estimate (48) since r2(1+r2)-11. The right hand side, after making use of Lemma 5.5 and applying the divergence theorem will give us good derivative terms, a good zero’th order term which we can ignore and a surface term. The surface term at infinity gives16 a term proportional to r2Hr¯2, integrated over the cylinder, which we control with the estimate in Theorem 5.5. This immediately gives the result for all of the terms except the term Inline graphic, which we obtain from a standard elliptic estimate on the sphere (see for instance Proposition 2.2.1 in [1]) :

graphic file with name 220_2019_3601_Equ252_HTML.gif

after noticing that we already control Inline graphic and Inline graphic with a suitable weight from (25) and (30). Finally, we note that the estimate can be derived in an identical manner for E.

Theorem 5.3

(Full integrated decay). Suppose that F is a solution of Maxwell’s equations, as in Theorem 4.2. Then we have

S[T1,T2]Er¯2+Hr¯2+EA2+HA2r2dtdrdωCΣT1Er¯2+EA2+Hr¯2+HA2+E˙r¯2+E˙A2+H˙r¯2+H˙A2r2drdω

for some C>0 independent of T1 and T2.

Proof

We combine the result of Theorem 5.2 with the Hardy estimates of Lemma 5.4 with a=1 to improve the weights near infinity in the integrated decay estimates, making use of a cut-off in much the same way as for the spin 0 problem.

Proof of Theorem 1.1 for Spin 2

As a useful piece of notation we first introduce the trace-free part of EAB by

E^AB=EAB-12δABECC=EAB+12δABEr¯r¯,

and similarly for H^AB. The boundary conditions of Theorem 4.3 may then be conveniently expressed as

r3E^AB+ϵ(ACH^B)C0,asr,

and we also have |EAB|2=|E^AB|2+12|Er¯r¯|2. We will first prove the boundedness and the degenerate integrated decay statement of the main theorem.17

Proposition 5.6

(Boundedness of energy and integrated decay estimate with loss). Let T2>T1. Suppose Eab and Hab are solutions to the spin 2 equations subject to (42) as in Theorem 4.3, there exists a constant C>0, independent of T1 and T2 such that we have

S[T1,T2]EabEab+HabHabr21+r2dtdrdω+ΣT2EabEab+HabHabr2(1+r2)drdω+Σ~[T1,T2]EabEab+HabHabr6dtdωCΣT1EabEab+HabHabr2(1+r2)drdω. 51

Proof

Let us now introduce the vector field

Y=T+13X.

We certainly have that Y is timelike, since

g(Y,Y)=-(1+r2)+13r2=-1-23r2<0.

Moreover, we have

Yπ=13(e0)21+r2+g1+r2.

The current that we shall integrate over S[T1,T2] is

Ja=QbcdaYbYcYd.

Clearly, we have by Lemma 3.1 that the flux of J through a spacelike surface with respect to the future directed normal will be positive. Moreover, since Q is trace-free and divergence free, DivJ will also be positive. To establish a combined energy and integrated decay estimate, we simply have to verify that the surface term on I has a definite sign (and check the weights appearing in the various integrals). We shall require some components of Q, which are summarised in the following Lemma:

Lemma 5.6

(Components of Qabcd). With respect to the orthonormal basis in which we work, we have

Q0000=EAB2+HAB2+2EAr¯2+2HAr¯2+Er¯r¯2+Hr¯r¯2Q000r¯=2EACϵABHBC+EAr¯ϵABHBr¯Q00r¯r¯=EAB2+HAB2-Er¯r¯2-Hr¯r¯2Q0r¯r¯r¯=2EACϵABHBC-EAr¯ϵABHBr¯Qr¯r¯r¯r¯=EAB2+HAB2-2EAr¯2-2HAr¯2+Er¯r¯2+Hr¯r¯2.

With our definition of the current J above, we apply the divergence theorem, Lemma 2.1. We now verify that all the terms have a definite sign.

  1. Fluxes throughΣt We compute
    ΣtJanadSΣt=ΣtQ(e0,Y,Y,Y)r21+r2drdω.
    Now, defining Y^=(1+23r2)-12Y, we have that
    -g(e0,Y^)=1+r21+23r232
    so by Lemma 3.1 we deduce18:
    Q(e0,Y^,Y^,Y^)Q0000,
    so that
    Q(e0,Y,Y,Y)1+r232Q0000,
    and hence
    ΣtJanadSΣtΣtEab2+Hab2r2(1+r2)dr.
  2. Bulk term We have
    DivJ=3Qabcd(Yπ)abYcYd=31+r2Q(e0,e0,Y,Y).
    Again applying Lemma 3.1 to Y^ and rescaling, we have
    DivJ(1+r2)12Q0000.
    As a result, we have
    S[T1,T2]DivJdηS[T1,T2]Eab2+Hab2r21+r2dtdrdω.
  3. Boundary term atI Finally, we consider the flux through surfaces Σ~r. We have
    Σ~rJamadSΣ~r=Σ~rQ(er¯,Y,Y,Y)r21+r2dtdω,
    Now, inserting our expression for Y and expanding, we have
    Q(er¯,Y,Y,Y)=1+r232Qr¯000+3r1+r2Qr¯r¯00+r21+r2Qr¯r¯r¯0+133r31+r232Qr¯r¯r¯r¯
    so that
    limrQ(er¯,Y,Y,Y)r21+r2=limrr6Qr¯000+3Qr¯r¯00+Qr¯r¯r¯0+133Qr¯r¯r¯r¯.
    Let us consider the first and third terms on the right hand side.19 We have:
    Qr¯000+Qr¯r¯r¯0=4EACϵABHBC=2EAB-12δABECC+ϵ(ACHB)C×E^AB-12δABEDD+ϵ(ADHB)D-2EAB2-2HAB2
    so that
    limrr6Qr¯000+Qr¯r¯r¯0=-2limrr6EAB2+HAB2
    where we make use of the boundary condition. Taking this together with the expressions for Qr¯r¯00, Qr¯r¯r¯r¯ we have:
    limrQ(er¯,Y,Y,Y)r21+r2=-limrr6[2-1033EAB2+HAB2+833Er¯r¯2+Hr¯r¯2+233EAr¯2+HAr¯2],
    so that
    limrQ(er¯,Y,Y,Y)r21+r2-limrr6Eab2+Hab2
    and
    Σ~[T1,T2]JamadSΣ~r-Σ~[T1,T2]limrr6Eab2+Hab2dtdω.

Taking all of this together, we arrive at the result.

As we did in the Maxwell case, we shall now use the structure of the equations to allow us to establish (weighted) integrated decay estimates for all derivatives of the fields EH. To control time derivatives we can simply commute with the Killing field T and apply Proposition 5.6. To control spatial derivatives we replace the time derivatives by the equations of motion and integrate the resulting cross terms by parts making use also of the constraints equations. The remarkable fact is that in the process we only see spacetime terms with good signs and lower order surface terms that we already control by the estimate before commutation.

We will note the following useful result, which allows the cross term to be integrated by parts:

Lemma 5.7

Let K be the vector field

graphic file with name 220_2019_3601_Equ52_HTML.gif 52

If H satisfies the constraint equation (Con HB), we have the identity

graphic file with name 220_2019_3601_Equ253_HTML.gif

Proof

See Appendix 7.3.

Proposition 5.7

(Higher order estimates). Let T2>T1. If Eab,Hab solve the spin 2 equations subject to the dissipative boundary condition (42) as in Theorem 4.3, then we have

graphic file with name 220_2019_3601_Equ254_HTML.gif

for some C>0 independent of T1 and T2.

Proof

Recall now (Evol’ EAB):

graphic file with name 220_2019_3601_Equ255_HTML.gif

Consider

graphic file with name 220_2019_3601_Equ256_HTML.gif

Now, since for any 2-tensor Z on S2 we have Z[AB]=12ϵAB(ϵCDZCD), we deduce that if the constraints hold then (Evol’ EAB) may be re-written:

graphic file with name 220_2019_3601_Equ257_HTML.gif

whence we deduce

graphic file with name 220_2019_3601_Equ258_HTML.gif

Now, using the second equality and applying the estimates in Proposition 5.6 for H and the commuted quantity E˙, we can verify that

S[T1,T2]XABXABr3dtdrdωCS[T1,T2]E˙AB2+Hr¯r¯2r21+r2dtdrdωCΣT1EabEab+HabHab+E˙abE˙ab+H˙abH˙abr2(1+r2)drdω.

We also have, however,

graphic file with name 220_2019_3601_Equ259_HTML.gif

where in the last step, we have used the result of Lemma 5.7 to replace the cross term with a good derivative term and a surface term.

It remains to control the term Inline graphic. Notice that by (Evol’ EAr¯) and (Con HB), we have

graphic file with name 220_2019_3601_Equ260_HTML.gif

On the other hand, since

graphic file with name 220_2019_3601_Equ261_HTML.gif

we can apply the standard elliptic estimate (see for instance Lemma 2.2.2 in [1])

graphic file with name 220_2019_3601_Equ262_HTML.gif

to obtain the desired bounds for Inline graphic.

This gives all the desired estimates for the derivatives of H. As in the Maxwell case, similar bounds for the derivatives of E can be derived in an identical manner.

Finally, much as in the Maxwell case, we apply the Hardy inequalities to establish integrated decay of the non-degenerate energy with the loss of a derivative:

Theorem 5.4

(Full integrated decay). Suppose that W is Weyl tensor, satisfying the Bianchi equations with dissipative boundary conditions, as in Theorem 4.3. Then there exists a constant C>0, independent of T such that we have

S[T1,T2]EabEab+HabHabr2(1+r2)dtdrdωCΣT1EabEab+HabHab+E˙abE˙ab+H˙abH˙abr2(1+r2)drdω.

Proof

Using the result of Proposition 5.6, 5.7 with the Hardy estimates of Lemma 5.4 to improve the weights near infinity in the integrated decay estimates, making use of a cut-off in much the same way as for the spin 0 and spin 1 problems, we obtain the desired estimates for |EAB|, |HAB|, |EAr¯| and |HAr¯|. Finally, the bounds for |Er¯r¯| and |Hr¯r¯| are obtained trivially using the trace-free condition for E and H.

Proof of Corollary 1.2 (uniform decay)

In this subsection, we show a uniform decay rate for the solutions to the confomal wave, Maxwell and Bianchi equations, hence proving Corollary 1.2. We will in fact prove the uniform decay estimates for all of the equations at once by showing that this is a consequence of the bounds that we have obtained previously. The result below is a combination of relatively standard ideas (for example, see [35] and Prop 3.1 (a) of [36]), but for completeness we include a direct proof.

Lemma 5.8

Let Ψ be a solution of either the conformal wave, Maxwell or Bianchi equations. Suppose that we are given some positive quantity E[Ψ](t) depending smoothly on Ψ and its derivatives at some time t which satisfies:

  1. E[Ψ](t) is a non-increasing C1 function of t,

  2. For every 0T1T2, E[Ψ](t) satisfies the integrated decay estimate:
    T1T2E[Ψ](t)dtCE[Ψ](T1)+E[tΨ](T1),
    for some C>0 independent of T1 and T2.

Then we have the estimate

E[Ψ](t)Cn(1+t)nk=0nEtkΨ(0)

for some constants Cn>0 depending only on n and C.

Proof

Let us set

E(k)(t)=EtkΨ(t).

We calculate

(1+t-T1)E(0)(t)=E(0)(t)+T1tdds(s-T1)E(0)(s)ds=E(0)(t)+T1tE(0)(s)+(s-T1)E˙(0)(s)dsE(0)(t)+T1tE(0)(s)ds,

where we have used the monotonicity of E(0) to obtain the last inequality. Now, it follows from the assumptions of the Lemma that

E(0)(t)+T1tE(0)(s)dsC1E(0)(T1)+E(1)(T1),

which together with the preceding estimate immediately imply

E(0)(t)C11+t-T1E(0)(T1)+E(1)(T1). 53

Taking T1=0, this in particular implies the conclusion of the Lemma in the case n=1.

To proceed, we induct on n. The n=1 case has just been established. Suppose now that the statement holds for some n. Noticing that the equation commutes with t, we use the induction hypothesis for both Ψ and tΨ to obtain

E(0)(t)+E(1)(t)Cn(1+t)nk=0n+1E(k)(0).

Now, we apply (53) with T1=t2 to deduce

E(0)(t)C11+t2E(0)t2+E(1)t2C1Cn(1+t2)n+1k=0n+1E(k)(0)C1Cn2n(1+t)n+1k=0n+1E(k)(0),

whence the result follows.

Proof of Corollary 1.2

For the conformal wave and Maxwell equations, Corollary 1.2 follows immediately by applying Lemma 5.8 to the quantity

E[Ψ](t)=ΣTεΨ1+r2r2drdω

which is monotone decreasing and satisfies an integrated decay statement with loss of one derivative. For the Bianchi equations, this quantity is not monotone decreasing (merely bounded by a constant times its initial value). We can circumvent this by applying Lemma 5.8 to the quantity:

E[W](t)=ΣtQ(e0,Y,Y,Y)r21+r2drdω,

which is monotone decreasing and satisfies an integrated decay statement with loss of one derivative. Noting that

E[W](t)ΣTεW1+r2r2drdω,

we are done.

Proof of Theorem 1.3: Gaussian beams

It is noteworthy that in the first instance, for all of the integrated decay estimates we obtained above the r-weight near infinity is weaker than that for the energy estimate. In particular, in order to show a uniform-in-time decay estimate, we needed to lose a derivative. In this section, we show that without any loss, there cannot be any uniform decay statements for the conformal wave equation. Moreover, an integrated decay estimate with no degeneration in the r-weight does not hold.

In order to show this, we will construct approximate solutions to the conformally coupled wave equation for a time interval [0, T] with an arbitrarily small loss in energy. We will in fact first construct a Gaussian beam solution on the Einstein cylinder and make use of the fact that (one half of) the Einstein cylinder is conformally equivalent to the AdS spacetime to obtain an approximate solution to the conformally coupled wave equation on AdS.

In the following, we will first study the null geodesics on the Einstein cylinder. We then construct Gaussian beam approximate solutions to the wave equation on the Einstein cylinder. Such construction is standard and in particular we follow closely Sbierski’s geometric approach [26] (see also [37, 38]). After that we return to the AdS case and build solutions that have an arbitrarily small loss in energy.

Geodesics in the Einstein cylinder

We consider the spacetime (ME,gE), where ME is diffeomorphic to R×S3 and the metric gE is given by

gE=-dt2+dψ2+sin2ψ(dθ2+sin2θdϕ2). 54

We will slightly abuse notation and denote the subsets of ME with notations similar to that for the AdS spacetime. More precisely, we will take

ΣT:={(t,ψ,θ,ϕ):t=T},S[T1,T2]:={(t,ψ,θ,ϕ):T1tT2}.

Take null geodesics γ:(-,)ME in the equatorial plane {θ=π2}. In coordinates, we express γ as

(t,ψ,θ,ϕ)=(T(s),Ψ(s),π2,Φ(s)).

Since t and ϕ are Killing vector fields, E and L defined as

T˙=E,sin2ΨΦ˙=L

are both conserved quantities. Here, and below, we use the convention that ˙ denotes a derivative in s. We require from now on that 0|L|<E. The geodesic equation therefore reduces to the ODE

Ψ˙=E2-L2sin2Ψ. 55

Solving (55) with the condition that Ψ achieves its minimum at s=0 and T(0)=Φ(0)=0, we have

T(s)=Es,sinΨ(s)=(E2-L2)sin2(Es)+L2E,

and

Φ(s)=0sLE2(E2-L2)sin2(Es)+L2ds.

In order to invert the sine function to recover Ψ, we will use the convention that for Es[2kπ-π2,2kπ+π2), and kZ, we require Ψ(s)[0,π2]; while for Es[(2k+1)π-π2,(2k+1)π+π2), and kZ, we require Ψ(s)[π2,π]. Notice that this choice of the inverse of the sine function gives rise to a smooth null geodesic.

Moreover, direct computations show that

T˙(s)=E,Ψ˙(s)=EE2-L2sin(Es)(E2-L2)sin2(Es)+L2,Φ˙(s)=LE2(E2-L2)sin2(Es)+L2.

Constructing the Gaussian beam

Given a null geodesic γ on (ME,gE) as above, we follow the construction in Sbierski [26] to obtain an approximate solution to the wave equation on (ME,gE) which is localised near γ and has energy close to that of γ. We first define the phase function φ and its first and second partial derivatives on γ and then construct the function φ in a neighbourhood of γ. We also define the amplitude a on γ. More precisely, on γ, we require the following conditions:

  1. φ(γ(s))=0

  2. dφ(γ(s))=γ˙(s)

  3. The matrix Mμν:=μνφ(γ(s)) is a symmetric matrix satisfying the ODE
    ddsM=-A-BM-MBT-MCM,
    where A, B, C are matrices given by
    Aκρ=12(κρgμν)μφνφ,Bκρ=κgρμμφ,Cκρ=gκρ,
    and obeying the initial conditions
    1. M(0) is symmetric;
    2. M(0)μνγ˙ν=(μφ˙)(0);
    3. I(M(0)μν)dxμγ(0)dxνγ(0) is positive definite on a three dimensional subspace of Tγ(0)M that is transversal to γ˙.
  4. a(γ(0))0 and a satisfies the ODE
    2gradφ(a)+φ·a=0
    along γ.

The results in [26] ensure that φγ,μφγ,μνφγ,aγ can be constructed satisfying these conditions. We then let φ to be a smooth extension of φ away from γ compatible with these derivatives. Likewise aN is defined to be an extension of aγ as constructed above. Moreover, we require aN to be compactly supported in a (small) tubular neighborhood N of the null geodesic γ.

We define the energy for a function on ME by

E^t(w):=12Σt((tw)2+(ψw)2+(θw)2sin2ψ+(ϕw)2sin2ψsin2θ)sin2ψdψdω.

Here, as elsewhere, dω=sinθdθdϕ is the volume form of the round unit sphere. We also associate the geodesic γ with a conserved energy

E(γ)=-gE(γ˙,t).

Notice that this agrees with the convention E=T˙ used in the previous subsection.

The main result20 of Sbierski regarding the approximate solution constructed above is the following theorem21 (see Theorems 2.1 and 2.36 in [26]):

Theorem 5.5

Given a geodesic γ parametrized by E and L as above, let

wE,L,λ,N=aNeiλφ,

where aN and φ are defined as above. Then wλ,N obeys the following conditions:

  1. wE,L,λ,NL2(S[0,T])C(T);

  2. E^0(wE,L,λ,N)asλ;

  3. wE,L,λ,N is supported in N, a tubular neighborhood of γ;

  4. Fix μ>0 and normalize the initial energy of wE,L,λ,N by
    w~E,L,λ,N:=wE,L,λ,NE^0(wE,L,λ,N)·E(γ).
    Then for N a sufficiently small neighborhood of γ and λ sufficiently large, the following bound holds:
    supt[0,T]E^t(w~E,L,λ,N)-E(γ)<μ.

We also need another fact regarding the second derivatives of φ which is a consequence of the construction in [26] (see (2.14) in [26]):

Lemma 5.9

I(φγ)=I(φγ)=0. Moreover, I(φγ) is positive definite on a 3-dimensional subspace transversal to γ˙.

The fact that aN is independent of λ together with Lemma 5.9 imply that the Gaussian beam approximate solution constructed above has bounded L2 norm independent of λ. We record this bound in the following lemma:

Lemma 5.10

Let wE,L,λ,N be as in Theorem 5.5. The following bound holds:

wE,L,λ,NL2(S[0,T])C(T).

The conformal transformation

Once we have constructed the Gaussian beam for the wave equation on the Einstein cylinder, it is rather straightforward to construct the necessary sequence of functions using the conformal invariance of the operator

L=g-16R(g),

where R(g) is the scalar curvature of the metric g.

We first set up some notations. We will be considering ME restricted to ψπ2 as a manifold with boundary diffeomorphic to R×Sh3. The interior of this manifold will also be identified with MAdS via identifying the coordinate functions (t,θ,ϕ), as well as

tanψ=r.

It is easy to see that gE and gAdS are conformal. More precisely, gE as before can be written as

gE=-dt2+dψ2+sin2ψ(dθ2+sin2θdϕ2);

while in the (t,ψ,θ,ϕ) coordinate system, gAdS takes the following form

gAdS=1cos2ψ(-dt2+dψ2+sin2ψ(dθ2+sin2θdϕ2)).

We now proceed to the construction of the approximate solution to the conformally coupled wave equation on AdS using the conformal invariance of L. More precisely, we have

Lemma 5.11

Let w be a function on ME restricted to ψπ2. Then we have

1(1+r2)32(gEw-w)=gAdSw1+r2+2w1+r2.
Proof

This can be verified by an explicit computation.

We are now ready to construct the approximate solution. To heuristically explain the construction, consider Fig. 1. On the left we sketch the curve γ along which our approximate solution is concentrated in the Einstein cylinder. To allow this to be plotted, we project onto a surface of constant t, θ which carries a spherical geometry and can be visualised via its embedding in R3. We actually wish to construct an approximate solution on anti-de Sitter, which is conformal to one half of the Einstein cylinder. To do so, we restrict our attention to one hemisphere and arrange that whenever the curve γ strikes the equator of the Einstein cylinder, it is reflected. Each time this occurs, we shall arrange that the Gaussian beam is attenuated by a factor which depends on the angle of incidence (which in turn depends on E and L). The more shallow the reflection, the weaker the attenuation. Crucially, the time, t, between reflections is independent of the angle that we choose. As a result, by taking the angle of incidence to be sufficiently small, we can arrange that an arbitrarily small fraction of the initial energy is lost at the boundary over any given time interval.

Fig. 1.

Fig. 1

An typical null geodesic γ shown in black projected to a surface of constant θ in the optical geometry of the Einstein cylinder (left). The corresponding curve for the anti-de Sitter spacetime, after reflections at I (right)

To be more precise, let us fix T0. We will construct an approximate solution for t[0,T]. Take NN be the smallest integer such that T<(4N+3)π2. We then construct an approximate solution for t(-π2,(4N+3)π2) starting from the function wE,L,λ,N constructed previously. This will correspond to a Gaussian beam which strikes the boundary 2N times between t=0 and t=T. Notice that the geodesic γ has the property that it lies in the hemisphere {ψ<π2} for t(2kπ-π2,2kπ+π2) (for kZ) and that it lies in the other hemisphere, i.e., {ψ>π2}, for t((2k+1)π-π2,(2k+1)π+π2) (for kZ). Therefore, we will assume without loss of generality that the neighborhood N has been taken sufficiently small such that it lies entirely in {ψ<π2} for t(2kπ-π4,2kπ+π4) (and entirely in {ψ>π2} for t((2k+1)π-π4,(2k+1)π+π4)), where kZ.

Now for (t,ψ,θ,ϕ) in ME restricted to ψπ2, we define for t[0,T]

uE,L,λ(t,ψ,θ,ϕ)=k=0NR2kχt(2kπ-3π4,2kπ+3π4]wE,L,λ,N(t,ψ,θ,ϕ){ψπ2}1+r2+k=0NR2k+1χt((2k+1)π-3π4,(2k+1)π+3π4]wE,L,λ,N(t,π-ψ,θ,ϕ){ψπ2}1+r2, 56

where R is taken to be R=-E-E2-L2E+E2-L2 and χ is the indicator function. Notice in particular that when the time cutoff function is 0 in the first term (resp. in the second term), the support of wE,L,λ,N is entirely in {ψ>π2} (resp. {ψ<π2}). We also depict this in Fig. 2, where we denote

χ1(t)=k=0Nχt(2kπ-3π4,2kπ+3π4],χ2(t)=k=0Nχt((2k+1)π-3π4,(2k+1)π+3π4].
Fig. 2.

Fig. 2

The cutoff functions

The definition above is such that in the time interval t(-3π4,3π4], we take wE,L,λ,N constructed previously, restrict it to ψπ2 and rescale it by 11+r2. Then on the time interval t(π-3π4,π+3π4], we take the part of wE,L,λ,N that is supported in ψπ2, reflect it across the ψ=π2 hypersurface, rescale by a factor 11+r2 and then multiply by the factor R. As we will see later, the factor R is chosen so that the boundary conditions are approximately satisfied. We then continue this successively, taking parts of the solutions in ψπ2 and ψπ2, reflecting when appropriate, and multiplying by factors of R’s.

Lemma 5.12

The function uE,L,λ defined as in (56) has the following properties:

E0[uE,L,λ]asλ; 57
S[0,T](gAdSuE,L,λ+2uE,L,λ)2r2(1+r2)drdωdtC(T); 58
Σ¯[0,T](t(ruE,L,λ)+r2r(ruE,L,λ))2dωdtC(T). 59

Proof. First note that E^0[wE,L,λ]CE0[uE,L,λ], so the first claim follows from Theorem 5.5. Next recall that we have assumed that the neighbourhood N has been taken sufficiently small so that for each of the summands, the indicator function χ is constant on the support of wE,L,λ,N when restricted to a hemisphere. It therefore suffices to consider only the contributions from wE,L,λ,N (as no derivatives fall on the indicator functions). We will write

uE,L,λ=uE,L,λ,1+uE,L,λ,2,

where uE,L,λ,1 is the first sum in (56) and uE,L,λ,2 is the second sum in (56). For uE,L,λ,1, we apply Lemma 5.11 to get

S[0,T](gAdSuE,L,λ,1+2uE,L,λ,1)2r2(1+r2)drdωdtS[0,T]1(1+r2)3(gEwE,L,λ,N-wE,L,λ,N)2r2(1+r2)drdωdt=S[0,T](gEwE,L,λ,N-wE,L,λ,N)2sin2ψdψdωdtC(T).

In the last line, we have used the estimates in Theorem 5.5 and Lemma 5.10. By a straightforward identification of the two hemispheres in ME, we can prove a similar bound for uE,L,λ,2:

S[0,T](gAdSuE,L,λ,2+2uE,L,λ,2)2r2(1+r2)drdωdtS[0,T](gEwE,L,λ,N-wE,L,λ,N)2sin2ψdψdωdtC(T).

This concludes the proof of the second claim.

We now show that the boundary terms are appropriately bounded in L2. By construction, there are only contributions to the boundary terms in a neighborhood of 1π(t-π2)N. Since there are at most O(N)=O(T) such contributions, it suffices to show that one of them is bounded. We will look at the boundary contribution near t=π2, which takes the form

limr(rtuE,L,λ+r2r(ruE,L,λ))(t,r,θ,ϕ)=limψπ2-(twE,L,λ,N+ψwE,L,λ,N)(t,ψ,θ,ϕ)+limψπ2-R(twE,L,λ,N+ψwE,L,λ,N)(t,π-ψ,θ,ϕ)=iλaN((tφ+ψφ)+R(tφ-ψφ))eiλφ(t,ψ=π2,θ,ϕ)+((taN+ψaN)+R(taN-ψaN))eiλφ(t,ψ=π2,θ,ϕ). 60

The latter term is clearly bounded pointwise independent of λ. The first term has a factor of λ and we will show that it is nevertheless bounded in L2 since by the choice of R, ((tφ+ψφ)+R(tφ-ψφ)) vanishes on γ. More precisely, by points (1), (2) in Sect. 5.5.2 and Lemma 5.9, we have

Iφ(t,ψ=π2,θ,ϕ)α((t-π2)2+(θ-π2)2+(ϕ-0Eπ2LE2(E2-L2)sin2(Es)+L2ds)2)

for some α>0. We further claim that

((tφ+ψφ)+R(tφ-ψφ))(t=π2,ψ=π2,θ=π2,ϕ=0Eπ2LE2(E2-L2)sin2(Es)+L2)=0.

This follows from the fact that dφ=γ˙ on γ and the choice of R. More precisely, we have

((tφ+ψφ)+R(tφ-ψφ))(t=π2,ψ=π2,θ=π2,ϕ=0Eπ2LE2(E2-L2)sin2(Es)+L2)=(-E+E2-L2+R(-E-E2-L2))=0.

The desired L2 bound on the boundary then follows from Lemma 5.13.

Lemma 5.13

Suppose that f is a function defined on {ψ=π2} which vanishes to order 0 at (t=π2,θ=π2,ϕ=0Eπ2LE2(E2-L2)sin2(Es)+L2). Then

dωdt|feiλφ|2Cf,φλ-52.
Proof

In order to simplify notation, we define

ϕ0:=0Eπ2LE2(E2-L2)sin2(Es)+L2ds.

The statement that f vanishes to order 0 is equivalent to

fC(t-π2)2+(θ-π2)2+(ϕ-ϕ0)212.

Thus

dωdt|feiλφ|2=dωdtf2e-2λIφC0πsinθdθ02πdϕ0πdt(t-π2)2+(θ-π2)2+(ϕ-ϕ0)2e-2λα((t-π2)2+(θ-π2)2+(ϕ-ϕ0)2)CR3x2e-2αλx2dxCλ-52,

where in the last line we simply scale λ out of the integral.

Building a true solution

Given the approximate solution constructed above, we are now ready to build a true solution to the homogeneous conformally coupled wave equation with dissipative boundary condition. To this end, we need a strengthening of Theorem 5.1 which includes inhomogeneous terms:

Theorem 5.6

Let u be a solution of the inhomogeneous conformally coupled wave equation

gAdSu+2u=fin AdS 61

with finite (renormalized) energy initial data

ET1(u)<

and subject to inhomogeneous dissipative boundary conditions

(ru)t+r2(ru)rg,asr.

Then we have for any T1<t<T2:

Et[u]CT1,T2ET1[u]+Σ~[T1,T2]g2dωdt+S[T1,T2]f2r2(1+r2)drdωdt.
Proof

We have by (22) that

DivTJ=AdSu+2utu=ftu.

Integrating this over S[T1,T2] and applying the divergence theorem we pick up terms on the left hand side from ΣT1,ΣT2 and Σ~[T1,T2]. A straightforward calculation shows

ΣtTJanadSΣt=Et[u]

We also find

Σ~r[T1,T2]TJamadSΣ~r=S2r2(1+r2)tu(~ru)dωdt=-12S2[r2(tu)2+r2(1+r2)2(~ru)2-t(ru)+r(1+r2)(~ru)2]dωdt.

As r, the term in braces may be replaced with g, so we have

limrΣ~r[T1,T2]TJamadSΣ~r=-12Σ~[T1,T2]r2(tu)2+r6(~ru)2-g2dωdt.

Applying Lemma 2.1, we have:

Et[u]-ET1[u]=12Σ~[T1,t]-r2(tu)2-r6(~ru)2+g2dωdt+S[T1,t]ftur2drdtdω

so that

supt[T1,T2]Et[u]ET1[u]+12Σ~[T1,T2]g2dωdt+14(T2-T1)S[T1,T2](tu)21+r2r2drdtdω+(T2-T1)S[T1,T2]f2r2(1+r2)drdωdt. 62

Now

14(T2-T1)S[T1,T2](tu)21+r2r2drdtdω14supt[T1,T2]Σt(tu)21+r2r2drdω12supt[T1,T2]Et[u].

Applying this estimate to (62) and absorbing the energy term on the left hand side, we are done.

After taking λ to be large, we now construct true solutions of the wave equation with dissipative boundary conditions which only have a small loss of energy. To do this, we define u~E,L,λ to be uE,Lλ (defined by (56) in the previous subsection) multiplied by a constant factor in such a way that

E0(u~E,L,λ)=1.

Let UE,L,λ solve the homogeneous initial-boundary value problem:

gAdSUE,L,λ+2UE,L,λ=0

subject to dissipative boundary conditions

(rUE,L,λ)t+r2(rUE,L,λ)r0,asr,

and initial conditions

UE,L,λt=0=u~E,L,λt=0,UE,L,λtt=0=u~E,L,λtt=0.

We obtain the following theorem:

Theorem 5.7

Fix E>0 and 0|L|<E. Fix also T,ϵ>0. There exists a solution UE,L,λ of the homogeneous conformally coupled wave equation with dissipative boundary conditions such that UE,L,λ has energy 1 at time 0, and

inft[0,T]Et(UE,L,λ)E-E2-L2E+E2-L2CT-ϵ,

where C>0 is some universal constant.

Proof

Consider UE,L,λ as defined above, which is a solution to the homogeneous conformal wave equation. By Lemma 5.12, as λ, we have

S[0,T](gAdSu~E,L,λ+2u~E,L,λ)2r2(1+r2)drdωdt0

and

Σ¯[0,T](t(ru~E,L,λ)+r2r(ru~E,L,λ))2dωdt0.

Therefore, after taking λ to be sufficiently large and applying Theorem 5.6 to UE,L,λ-u~E,L,λ, we can assume

supt[0,T]Et[UE,L,λ-u~E,L,λ]<ϵ.

On the other hand, by the construction of uE,L,λ, we have

inft[0,T]Et[u~E,L,λ]E-E2-L2E+E2-L22N+1E-E2-L2E+E2-L2CT

for some C>0. The results follow straightforwardly.

In particular, by taking |L| sufficiently close to E and ϵ sufficiently small, this implies that on the time interval [0, T], the loss of energy can be arbitrarily small. This also implies that any uniform integrated decay estimates without loss do not hold:

Corollary 5.8

There exists no constant C>0, such that

0Et[u]dtCE0[u]

holds for every solution u to the conformal wave equation with finite initial energy subject to dissipative boundary conditions.

Similarly, there exists no continuous positive function f:R+R+, such that f(t)0 as t and

Et[u]f(t)E0[u],

holds for every solution u to the conformal wave equation with finite initial energy subject to dissipative boundary conditions.

Remark 2

We are grateful to an anonymous referee, who points out that our construction above can in fact be adapted to establish the stronger statement that the degeneracy in r for the integrated decay rate established above is in fact optimal. That is to say for any δ>0, there can exist no constant C such that Proposition 5.2 holds with the weight r21+r2 replaced by r2+δ1+r2. This in particular suggests that the trapping phenomenon present here is different to the normally hyperbolic trapping observed, for example, at the photon sphere of the Schwarzschild black hole.

Generalizations

Alternative boundary conditions

Conformal Wave

We assumed that our solution u satisfied the boundary condition

(ru)t+r2(ru)r0,asr.

We can also consider the boundary conditions

(ru)t+β(ω)r2(ru)r0,asr.

where β:S2R is a smooth function satisfying the uniform positivity condition:

β(ω)κ2

for some κ>0 for all ωS2. This can be treated exactly as above, with the same results although the constants in the various estimates will now depend on β. One could also imagine adding some small multiples of tangential derivatives of u to the boundary condition. This can also be handled by the methods above, but this will require combining the energy and integrated decay estimates.

Maxwell

The boundary conditions that we assumed,

r2EA+ϵABHB0,asr,

can also be generalised without materially affecting the results. In particular, we could choose as boundary conditions

r2EA+βAB(ω)ϵBCHC0,asr

where the symmetric matrix valued function β:S2M(2×2) satisfies a uniform positivity bound:

βAB(ω)ξAξBκ2ξ2, 63

for some κ>0 and for all ξR2, ωS2. In particular, our results hold for any Leontovic boundary condition [34, §87] satisfying (63). Again, one could also permit other components of E, H to appear in the boundary condition with small coefficients and this can be handled by combining the energy and integrated decay estimates.

Bianchi

Recall that we are considering boundary conditions of the form:

r3E^AB+ϵ(ACH^B)C0,asr. 64

To generalise these, let us introduce a 4-tensor on S2, βABCD(ω), symmetric on its first and last pairs of indices and also under interchange of the first and last pair of indices:

βABCD=β(AB)CD=βAB(CD)=βCDAB

we also require that β is trace free on its first (or last) indices, i.e. βAABC=0. In other words, β represents a symmetric bilinear form on the space of symmetric trace-free tensors at each point of S2. We can consider boundary conditions

r3βABCDE^CD+ϵ(ACH^B)C0,asr. 65

Provided that βABCD is uniformly close to the canonical inner product on symmetric trace-free tensors, our methods will apply. More concretely, there is a δ>0, which could be explicitly calculated, such that if

(1+δ)Ξ2βABCD(ω)ΞABΞCD(1-δ)Ξ2

holds for any symmetric traceless Ξ and ωS2, then our results hold for the boundary conditions (65).

Of course, this does not imply that boundary conditions which don’t satisfy this inequality lead to growth, simply that our approach breaks down when the boundary conditions are too far from the “optimally dissipative” ones (64).

The Dirichlet problem for (B)

Let us briefly discuss the Dirichlet problem for the Weyl tensor and its relation to the Dirichlet problem from the point of view of metric perturbations. In the latter, one wishes to fix, to linear order, the conformal class of the metric at infinity. Fixing the conformal class to be that of the unperturbed anti-de Sitter spacetime is equivalent to requiring that the Cotton-York tensor of the perturbed boundary metric vanishes. One may verify that the Cotton-York tensor of the boundary metric vanishes if and only if

r3H^AB+r3EAr¯+r3Hr¯r¯0asr,

as can be established by considering the metric in Fefferman-Graham coordinates. Let us illustrate in what way fixing the conformal class of the metric on the boundary is a more restrictive condition than fixing Dirichlet-conditions on the Weyl tensor, r3H^AB0.

It is possible to extract from the Bianchi equations a symmetric hyperbolic system on I involving only r3EAr¯,r3Hr¯r¯, where r3H^AB appears as a source term. Using this system it is possible to show that if r3EAr¯ and r3Hr¯r¯ vanish at infinity for the initial data then this condition propagates. Moreover, it is easy to see how to construct a large class initial data satisfying this vanishing condition at infinity, as well as a large class not satisfying it illustrating that fixing the conformal class of the metric on the boundary is a more restrictive condition than purely fixing Dirichlet-conditions on the Weyl tensor.

In conclusion, for initial data satisfying the vanishing condition, we may return to the estimate (43) and establish directly that solutions of the Bianchi system representing a linearised gravitational perturbation fixing the conformal class of the boundary metric are bounded. This is in accordance with the results of [39], in which it is shown that metric perturbations obeying the linearised Einstein equations can be decomposed into components which separately obey wave equations admitting a conserved energy.

The relation to the Teukolsky equations

We finally contrast our result with an alternative approach to study the spin 2 equations on AdS, which has a large tradition in the asymptotically flat context and relies on certain curvature components satisfying decoupled wave equations. As we will see below, however, in the AdS context this approach merely obscures the geometric nature of the problem and does not provide any obvious simplification as the resulting decoupled equations couple via the boundary conditions (and moreover do not admit a conserved energy).

To decouple the spin 2 equations, we take the standard θ,ϕ coordinates for the spherical directions,22 and choose as basis e1=r-1θ, e2=(rsinθ)-1ϕ. We then write:

Ψ±=E11-E222H12iH11-H22±2E12.

These quantities obey the Teukolsky equations:

0=-r21+r2t2Ψ±±4r1+r2tΨ±+1+r2r3rr41+r2rr(1+r2)Ψ±+1sinθθsinθθΨ±+1sin2θϕ2Ψ±-4icosθsin2θϕΨ±-4sin2θ-2Ψ±. 66

Once Ψ± have been found, the other components of W can be recovered by solving an elliptic system coupled to the symmetric hyperbolic system in the boundary discussed in Sect. 6.2. It might appear that one can simply study the decoupled equations for Ψ± separately. Unfortunately, in general, the correct boundary conditions couple the equations.

Let us see what the appropriate boundary conditions to impose on Ψ± are in order to fix the conformal class of the boundary metric. Clearly the vanishing of H^AB at I is equivalent to the condition

r3(Ψ+-Ψ-)0asr. 67

This however only gives us one condition for two equations. For the other condition we use the fact that in the context of the Dirichlet problem (fixing the conformal class discussed in Sect. 6.2) we know that r3EAr¯,r3Hr¯r¯ vanish on the boundary.23 Inserting this into the Bianchi equations we can derive that

r2rr3E^AB0asr.

This gives us a Neumann condition for the Teukolsky equations:

r2rr3(Ψ++Ψ-)0asr. 68

We should of course not be surprised that the two Teukolsky equations couple at the boundary. The two scalar functions Ψ± represent the outgoing and ingoing radiative degrees of freedom. Since the Dirichlet boundary conditions are reflecting, one should of course expect that the two components couple at the boundary. The pair of equations (66) with the boundary conditions (67), (68) forms a well posed system of wave equations, as may be seen for instance with the methods of [24]. In any case, there seems to be no advantage in studying this coupled system of wave equations over the first order techniques of this paper.

We remark that the Teukolsky approach was recently used in [28] to consider perturbations of the Kerr-AdS family of metrics (which includes anti-de Sitter for a=m=0). In this paper, the Teukolsky equation is separated and a boundary condition (preserving the conformal class of the metric at infinity) is proposed for the radial part of each mode of Ψ±separately. This appears to contradict our discussion above. When one examines equations (3.9–12) of [28] one sees spectral parameters appearing up to fourth order.24 Returning to a physical space picture, these will appear as fourth order operators on the boundary. Accordingly, it is far from clear whether these boundary conditions can be meaningfully interpreted as giving boundary conditions for a dynamical evolution problem. Indeed, our heuristic argument for the coupling strongly suggests that the conditions of [28] understood as boundary conditions for a dynamical problem cannot give rise to a well posed evolution. That is not to say that these boundary conditions are not suitable for calculating (quasi)normal modes: any such mode will certainly obey these conditions, providing a useful trick to simplify such computations.

Acknowledgements

G.H. is grateful for the support offered by a grant of the European Research Council (Grant No. 337488). G.H., J.S. and C.M.W. are grateful to the Newton Institute for support during the programme “Mathematics and Physics of the Holographic Principle”. J.L. thanks the support of the NSF Postdoctoral Fellowship DMS-1204493. J.S. acknowledges funding from the European Research Council under the European Union’s Horizon 2020 research and innovation program (project GEOWAKI, grant agreement 714408).

7. Appendix

7.1. Proof of Lemma 5.3

Proof

Let us first consider the first two terms of K. We set

graphic file with name 220_2019_3601_Equ263_HTML.gif

Calculating with the expression for the divergence of a vector field (19), we find

graphic file with name 220_2019_3601_Equ264_HTML.gif

Finally, taking

graphic file with name 220_2019_3601_Equ265_HTML.gif

we calculate

graphic file with name 220_2019_3601_Equ266_HTML.gif

Adding these two contributions, we arrive at the result.

7.2. Proof of Lemma 5.5

Let us introduce

graphic file with name 220_2019_3601_Equ267_HTML.gif

From the expression (19) for the divergence of a vector field, we can quickly establish that, owing to cancellation between the mixed partial derivatives, we have

graphic file with name 220_2019_3601_Equ268_HTML.gif

so that

graphic file with name 220_2019_3601_Equ269_HTML.gif

Here we have used the constraint equation to pass from the first to the second line. This completes the proof.

7.3. Proof of Lemma 5.7

This is a straightforward calculation with the formula for the divergence of a vector field (19). We find

graphic file with name 220_2019_3601_Equ270_HTML.gif

Here, we have used the constraint equation in passing from the second equality to the third by replacing Inline graphic with a term involving r(r3HBr¯).

Footnotes

1

To simplify the algebra we choose Λ=-3 throughout the paper.

2

The causal nature of this boundary is clearer in the Penrose picture discussed in Sect. 1.5 below.

3

We use here the nomenclature of the putative AdS/CFT correspondence.

4

See [26] for a discussion of the Gaussian beam approximation on general Lorentzian manifolds.

5

These will be more involved in view of the fact that the equations involve constraints.

6

The introduction of this system in the context of the full non-linear problem goes back to [10].

7

It is straightforward to translate the estimates established for (3) in Theorem 1.1 into the conformal picture currently discussed.

8

Obviously there’s no global orthonormal basis for S2. We can either take multiple patches, or else understand the capital Latin indices as abstract indices.

9

When acting on a scalar, we will sometimes write ~μf=:~μf.

10

ϵ12=1 in this basis.

11

Theorem 1.1 of course establishes a stronger (global) estimate. The key point here is to explain why the naive approach using only the Bel-Robinson tensor and the Killing fields fails and also to derive the (reduced) system of equations which will be needed in the second part of the proof of Theorem 1.1.

12

Or at least Friedrichs symmetrizable, but the distinction is not important for our purposes. The key issue is the existence of a good energy estimate. Providing this exists, putting the system into symmetric hyperbolic form is straightforward.

13

Here and elsewhere, in expressions like EAr¯2+EAB2, contraction over the indices AB etc. is implied, i.e. EAr¯2+EAB2=EAr¯EAr¯+EABEAB.

14

For instance, specifying EAB=0 on I will clearly lead to a unique solution of the modified system. On the other hand, the same boundary condition will not completely fix the boundary term occurring in (43) in the unmodified formulation, illustrating the severe drawback of the latter.

15

We shall take the frugal approach of commuting with the timelike Killing field. If one is happy to exploit the angular symmetries of AdS, our approach can be simplified.

16

Notice that there is no surface term contribution at infinity arising from Inline graphic due to the decay of the angular derivative of H in r by the local well-posedness theorem (Theorem 4.2).

17

As we will see in the proof, the key difference to the case of the wave- and Maxwell’s equations is that here we will have to establish both these estimates at the same time!

18

We write fg to mean that there exists a numerical constant C>0 such that C-1fgCf.

19

The factor 13 appearing in the definition of Y was chosen to arrange a cancellation between these terms.

20
Translated into our notation, the result in [26] requires the following bounds on the geometry of (ME,gE):
-Cg(t,t)c<0,|t(t,t)|+|t(t,ei)|+|t(ei,ej)|C,
where ei is an orthonormal frame on the S3 slice. These estimates are obviously satisfied in our setting.
21

Regarding point (4) in the theorem below, the original work of Sbierski gives a more general characterization of the energy of Gaussian beams in terms of the the energy of geodesics on general Lorentzian manifold. Since in our special setting, the energy of a geodesic is conserved, we will not record the most general result but will refer the readers to [26] for details.

22

The (r,t,θ,ϕ) do not quite cover AdS, and so some care must be taken at the axis. For the purposes of this section, we shall ignore this difficulty.

23

In the general case, their trace on the boundary can de determined by solving transport equations as outlined in Sect. 6.2.

24

In the presence of rotation things are even worse, as the square root in the boundary conditions implies that the operator on the boundary is non-local.

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Contributor Information

Gustav Holzegel, Email: g.holzegel@imperial.ac.uk.

Jonathan Luk, Email: jluk@stanford.edu.

Jacques Smulevici, Email: smulevici@ljll.math.upmc.fr.

Claude Warnick, Email: c.m.warnick@maths.cam.ac.uk.

References

  • 1.Christodoulou D, Klainerman S. The Global Nonlinear Stability of the Minkowski Space. Princeton: Princeton University Press; 1993. [Google Scholar]
  • 2.Ringstroem H. Future stability of the Einstein-non-linear scalar field system. Invent. Math. 2008;173:123–208. [Google Scholar]
  • 3.Friedrich H. Existence and structure of past asymptotically simple solutions of Einstein’s field equations with positive cosmological constant. J. Geom. Phys. 1986;3:101–117. [Google Scholar]
  • 4.Hintz P, Vasy A. The global non-linear stability of the Kerr-de Sitter family of black holes. Acta Math. 2018;220:1–206. [Google Scholar]
  • 5.Dafermos M, Rodnianski I. Lectures on black holes and linear waves. Evolution equations. Clay Math. Proc. (Am. Math. Soc.) 2013;17:97–205. [Google Scholar]
  • 6.Dafermos, M., Rodnianski, I., Shlapentokh-Rothman, Y.: Decay for solutions of the wave equation on Kerr exterior spacetimes III: the full subextremal case |a|<M. (2014). arXiv:1402.7034 [gr-qc]
  • 7.Dafermos, M., Holzegel, G., Rodnianski, I.: The linear stability of the Schwarzschild solution to gravitational perturbations. (2016). arXiv:1601.06467 [gr-qc]
  • 8.Klainerman, S., Szeftel, J.: Global nonlinear stability of Schwarzschild spacetime under polarized perturbations. (2017). arXiv:1711.07597 [gr-qc]
  • 9.Friedrich H. On the AdS stability problem. Class. Quantum Grav. 2014;31:105001. [Google Scholar]
  • 10.Friedrich H. Einstein equations and conformal structure—existence of anti de Sitter type space-times. J. Geom. Phys. 1995;17:125–184. [Google Scholar]
  • 11.Enciso, A., Kamran, N.: Lorentzian Einstein metrics with prescribed conformal infinity. (2014). arXiv:1412.4376 [math.AP]
  • 12.Dafermos, M., Holzegel, G.: Dynamic instability of solitons in 4+1 dimensional gravity with negative cosmological constant (unpublished). https://www.dpmms.cam.ac.uk/~md384/ADSinstability.pdf (2006)
  • 13.Dafermos M. The Black Hole Stability Problem. Cambridge: Newton Institute; 2006. [Google Scholar]
  • 14.Anderson MT. On the uniqueness and global dynamics of AdS spacetimes. Class. Quantum Grav. 2006;23:6935–6954. [Google Scholar]
  • 15.Bizon P, Rostworowski A. On weakly turbulent instability of anti-de Sitter space. Phys. Rev. Lett. 2011;107:031102. doi: 10.1103/PhysRevLett.107.031102. [DOI] [PubMed] [Google Scholar]
  • 16.Dias OJ, Horowitz GT, Santos JE. Gravitational turbulent instability of anti-de Sitter space. Class. Quantum Grav. 2012;29:194002. [Google Scholar]
  • 17.Buchel A, Lehner L, Liebling SL. Scalar collapse in AdS. Phys. Rev. D. 2012;86:123011. [Google Scholar]
  • 18.Moschidis, G.: The Einstein–null dust system in spherical symmetry with an inner mirror: structure of the maximal development and Cauchy stability. (2017). arXiv:1704.08685 [gr-qc]
  • 19.Moschidis, G.: A proof of the instability of AdS for the Einstein–null dust system with an inner mirror. (2017). arXiv:1704.08681 [gr-qc]
  • 20.Moschidis, G.: The characteristic initial-boundary value problem for the Einstein–massless Vlasov system in spherical symmetry. (2018). arXiv:1812.04274 [math.AP]
  • 21.Moschidis, G.: A proof of the instability of AdS for the Einstein–massless Vlasov system. (2018). arXiv:1812.04268 [math.AP]
  • 22.Chrusciel PT, Delay E. Non-singular, vacuum, stationary space-times with a negative cosmological constant. Ann. Henri Poincare. 2007;8:219. [Google Scholar]
  • 23.Christodoulou D, Klainerman S. Asymptotic properties of linear field equations in Minkowski space. Commun. Pure Appl. Math. 1990;43(2):137–199. [Google Scholar]
  • 24.Warnick C. The Massive wave equation in asymptotically AdS spacetimes. Commun. Math. Phys. 2013;321:85–111. [Google Scholar]
  • 25.Gannot, O.: Elliptic boundary value problems for Bessel operators, with applications to anti-de Sitter spacetimes. (2015) arXiv:1507.02794 [math.AP]
  • 26.Sbierski, J.: Characterisation of the energy of Gaussian beams on Lorentzian manifolds—with applications to black hole spacetimes. (2013). arXiv:1311.2477 [math.AP]
  • 27.Holzegel, G., Luk, J., Smulevici, J., Warnick, C.: The global non-linear stability of the anti-de Sitter space with dissipative boundary conditions (in preparation)
  • 28.Dias ÓJ, Santos JE. Boundary conditions for Kerr–AdS perturbations. JHEP. 2013;1310:156. [Google Scholar]
  • 29.Lions J-L. Exact controllability, stabilization and perturbations for distributed systems. SIAM Rev. 1988;30(1):1–68. [Google Scholar]
  • 30.Chen G. Energy decay estimates and exact boundary value controllability for the wave equation in a bounded domain. J. Math. Pures Appl. (9) 1979;58(3):249–273. [Google Scholar]
  • 31.Lagnese J. Decay of solutions of wave equations in a bounded region with boundary dissipation. J. Differ. Equ. 1983;50(2):163–182. [Google Scholar]
  • 32.Holzegel, G.H., Warnick, C.M.: Boundedness and growth for the massive wave equation on asymptotically anti-de Sitter black holes. J. Funct. Anal. (in press, 2013). arXiv:1209.3308 [gr-qc]
  • 33.Christodoulou, D.: The Action Principle and Partial Differential Equations. No. 146 in Ann. Math. Studies. Princeton, NJ (2000)
  • 34.Landau LD, Pitaevskii LP, Lifshitz EM. Electrodynamics of Continuous Media, Second Edition: Volume 8 (Course of Theoretical Physics) 2. Oxford: Butterworth-Heinemann; 1984. [Google Scholar]
  • 35.Dafermos M, Rodnianski I. A new physical-space approach to decay for the wave equation with applications to black hole spacetimes. In: Exner P, editor. XVIth International Congress on Mathematical Physics. London: World Scientific; 2009. pp. 421–433. [Google Scholar]
  • 36.Bátkai A, Engel KJ, Prüss J, Schnaubelt R. Polynomial stability of operator semigroups. Math. Nachr. 2006;279:1425–1440. [Google Scholar]
  • 37.Arnaud J. Hamiltonian theory of beam mode propagation. Prog. Opt. 1973;XI:249–304. [Google Scholar]
  • 38.Ralston JV. Solutions of the wave equation with localized energy. Commun. Pure Appl. Math. 1969;22:807–823. [Google Scholar]
  • 39.Ishibashi A, Wald RM. Dynamics in nonglobally hyperbolic static space-times. 3. Anti-de Sitter space-time. Class. Quantum Grav. 2004;21:2981–3014. [Google Scholar]

Articles from Communications in Mathematical Physics are provided here courtesy of Springer

RESOURCES