Expression profiles of the MXD3 gene and association of sequence variants with growth traits in Xianan and Qinchuan cattle

Abstract

Max dimerization protein 3 (MXD3) belongs to the MYC superfamily of basic helix‐loop‐helix leucine zipper transcription factors, and MXD3‐MAX heterodimers can bind to promoters of target genes to modulate their expression. The aim of this study was to determine the MXD3 mRNA expression levels in various cattle tissues comprising heart, liver, spleen, lung, kidney, Longissimus dorsi muscle and subcutaneous fat in Chinese Qinchuan and Xianan cattle breeds. The RT‐qPCR data showed that the MXD3 gene was variably expressed between all tissues and at levels that were significantly different between two breeds (p < .05). We used the polymerase chain reaction‐restriction fragment length polymorphism (PCR‐RFLP) method to investigate the possible association between single‐nucleotide polymorphisms (SNP) within the MXD3 gene and five different growth traits in cattle. We found two intronic SNPs (g.2694 C>T and g.3801 T>C) and one SNP in 3′untranslated region (3′UTR) (g.6263 G>A) of MXD3 gene. Association analysis revealed strong associations between pairwise and triple SNP combinations and the growth traits. Based on these results, we suggest that MXD3 polymorphisms could be useful as molecular markers in the Chinese beef cattle breeding program.

Three single‐nucleotide polymorphisms in MXD3 and its expression level in various tissues of cattle.

1. INTRODUCTION

The application of molecular genetics in animal husbandry has many important advantages (Khodabakhshzadeh et al., 2016; Zamani, Akhondi, & Mohammadabadi, 2015). One such significant advantage is the genotyping of individuals for specific genetic loci known to be associated with phenotypic traits of relevance to cattle farming and breeding (Khodabakhshzadeh et al., 2016; Mohammadreza Esfandyarpoo, & Mousapour, 2017). Often all the genes that affect a polygenic trait are not precisely known, although a number of candidate genes with major effects have been recognized (Mohammadabadi et al., 2010). In the candidate gene approach, the process of identifying such genes responsible for a polygenic trait variation includes the selection of candidate genes based on the relationship between physiological or biochemical processes involved in the expression of the phenotype, and subsequent testing of the selected genes as putative quantitative trait loci (QTL) (Mousavizadeh et al., 2009; Ruzina et al., 2010). The bovine genome is densely covered by single‐nucleotide polymorphisms (SNP) markers, which facilitates the search for genes with significant effects on quantitative trait variation (Javanmard et al., 2008). Integrated approaches in terms of management and genetic improvement are of crucial importance for enhancement of production (Mohammadabadi & Sattayimokhtari, 2013; Soufy et al., 2009). Furthermore, economical and biological efficiency of production enterprises generally improves by increasing productivity and reproductive performance of animals (Mohammadabadi & Sattayimokhtari, 2013; Taghi Vajed Ebrahimi, Mohammadabadi, & Esmailizadeh, 2017; Zamani et al., 2015). Growth phenotypes such as body weight and size of cattle are often used as selection criteria because of their association with meat production (Buzanskas et al., 2014). Complex traits are usually highly polygenic; a recent meta‐analysis for cattle stature identified 163 genome‐wide significant loci (Bouwman et al., 2018). Cattle selection programmes based on the molecular genetic information is a powerful and effective strategy to enhance economic quantitative traits. Thus, marker‐assisted selection (MAS) at the DNA level significantly increases selection accuracy of purposeful phenotypes and shortens the generation intervals (Bouquet & Juga, 2013). As one of the largest beef producer in the world, China began directional selection in beef cattle for melioration of meat performance after 1980s to satisfy an increasing consumption of beef (Waldron, Jimin, Huijie, Xiaoxia, & Tre, 2013). However, Chinese beef production still relies on imports from abroad as well as on collaborations between breeders to improve Chinese beef production (Waldron et al., 2013). The need to maintain and improve local genetic resources has been recognized as a priority, at the world level. For example, biodiversity studies depicting a deep picture of the genetic variability of the available sheep breeds provide favourable opportunities for both genetic conservation programmes as well as for enhancing production efficiency by means of controlled and well‐designed crossbreeding systems exploiting breed diversities, heterosis and breed complementarity (Taghi Vajed Ebrahimi et al., 2017). Genetic diversity in indigenous breeds is a major concern considering the necessity of preserving what may be a precious and irreplaceable richness, regarding future productive demands (Khodabakhshzadeh et al., 2016). Conservation should be based on a deep knowledge of the genetic resources of the specific breed (Mohammadreza et al., 2017; Zamani et al., 2015). Therefore, it is important to characterize genetically indigenous breeds. Genes affecting polygenic traits and characterizing milk or meat production are difficult to identify (Shojaei et al., 2011; Soufy et al., 2009). The maintenance of genetic diversity in livestock species requires the adequate implementation of conservation priorities and sustainable management programmes, which should be based on comprehensive information regarding the structure of the populations, including sources of genetic variability among and within breeds (Mousavizadeh et al., 2009; Ruzina et al., 2010). Genetic diversity is an essential component for population survival, evolution, genetic improvement and adaptation to changing environmental conditions (Taghi Vajed Ebrahimi et al., 2017), and molecular methods based on molecular markers, such as RAPD, RFLP and microsatellites, are useful tools to study the underlying genetics (Mohammadabadi et al., 2010; Mousavizadeh et al., 2009; Taghi Vajed Ebrahimi et al., 2017).

The basic helix‐loop‐helix leucine zipper transcriptional regulators, which belongs to the MYC‐MAX‐MAD network, are central players in the control of cell‐cycle progression, proliferation, apoptosis and transformation (Grandori, Cowley, James, & Eisenman, 2000). The MAX‐MYC heterodimer is a sequence‐specific transcriptional activator, whereas the MAX‐MAD complex acts as a sequence‐specific transcriptional repressor (Lüscher & Vervoorts, 2012). The Max dimerization protein 3 (MXD3), member of MAD family, has been considered a potential target for therapeutic treatment of brain and central nervous system cancers due to its role in cellular proliferation and tumorigenesis (Barisone et al., 2012). MXD3 expression is significantly upregulated in visceral adipose tissues in human obese adults as well as in a zebrafish model of diet‐induced obesity in which downregulation of MXD3 expression suppressed the formation of visceral adiposity (Shimada et al., 2014). In addition, the expression of MXD3 was three‐fold reduced in adult skeletal muscle tissues compared with the fetal period in Qinchuan (QC) cattle. MXD3 gene was also enriched in the Gene Ontology (GO) terms of DNA binding, protein binding, negative regulation of transcription, DNA‐dependent and protein dimerization activity (Li et al., 2017). Therefore, the objective of this study was to identify SNPs within MXD3 and then to analyze their associations with the growth traits of Chinese cattle. We studied two different breeds, the QC breed, which is one of the most important Chinese beef cattle breeds, yet exhibiting worse growth performance and carcass traits than imported European cattle breeds (Xie, Meng, Cui, & Ren, 2012; Xie, Meng, Ren, Shi, & Zhou, 2012), as well as the Xianan (XN) cattle which is a crossbreed between Charolais cattle and Nanyang cattle.

To the best our knowledge, our study provided the first association analysis of MXD3 sequence variations with growth traits and expression profiles of MXD3 in seven tissues under the best normalized reference genes in cattle, which may improve the understanding of the molecular basis and the application of MAS for beef cattle breeding in China.

2. MATERIALS AND METHODS

2.1. Cattle and data collection

A total of 499 samples of QC cattle (2‐year‐old, n = 141; 3.5‐year‐old, n = 181) and XN cattle (n = 177, 2‐year‐old) were collected from two farms: the farm of Fufeng country in Shaanxi and the farm of Nanyang city in Henan provinces of China, respectively. All of the individuals were females. Five growth traits for association analysis were recorded at the age of 2 years old, females with no pregnancy both in QC (n = 141) and XN (n = 170) cattle following Gilbert's method (Gilbert, Bailey, & Shannon, 1993).

The growth traits were body weight (BW, kg), body length (BL, cm), body height (BH, cm), chest circumference (ChC, cm) and hip cross height (HCH, cm). The genomic DNA from each cattle was purified from 2% heparin‐treated jugular blood samples and diluted to 50 ng/µl and subsequently stored at −20°C for further usage following the standard procedures (Sambrook & Russell 2001).

2.2. Detection and identification of the variants within MXD3 gene

Using the bovine genome sequences in GenBank (Accession No. AC_000164), seven pairs of primer were designed by Primer v5.0 software (PREMIER Biosoft International) (Table S1). Genomic DNA pools of 40 randomly selected individuals were mixed gently from the two breeds, amplified and sequenced to identify the polymorphisms within MXD3. After comparing the MXD3 sequence to National Center for Biotechnology Information (NCBI), three mutations within bovine MXD3 were found. Accordingly, pairs of primers were designed to genotype the mutations based on restriction fragment length polymorphism (PCR‐RFLP) method using restriction enzyme Taq I, Hha I and Pvu II (Thermo Fisher Scientific) (Table S2).

2.3. RNA isolation and qRT‐PCR analysis

Seven tissues (heart, liver, spleen, lung, kidney, longissimus dorsi muscle and subcutaneous fat) were collected from three QC and three XN cattle when they were slaughtered at the cattle plant. After washing with phosphate buffered saline (PBS), samples were put immediately into liquid nitrogen and stored at −70°C for the subsequent steps; each tissues had three replicates. Next, Trizol reagent (Takara Co., Ltd) was used to extract the RNA. The RNA purity and concentration were determined using a NanoDrop 2000 spectrophotometer and we randomly chose three samples to check the purified RNA by 0.8% agarose gel electrophoresis (Figure S1). Next, the StarScript II One‐step RT‐PCR Kit (Takara Co., Ltd) with 2 µg RNA as the template was used for cDNA synthesis. Accurate normalization is a prerequisite for analysing target gene expression under various experimental conditions and samples. The RefFinder software (https://www.heartcure.com.au/reffinder/?type=reference) (Xie, Xiao, Chen, Xu, & Zhang, 2012) can conveniently and efficiently assess four software applications termed geNorm (Excel‐based) (Vandesompele et al., 2002), BestKeeper (Excel‐based) (Pfaffl, Tichopad, Prgomet, & Neuvians, 2004) and NormFinder (Excel‐based) (Andersen, Jensen, & Ørntoft, 2004). The standardization algorithms termed deltaCt method (Silver, Best, Jiang, & Thein, 2006) was also assessed in RefFinder. Herein, we employed RefFinder to assess the numbers and expression stability of reference genes. GAPDH (glyceraldehyde‐3‐phosphate dehydrogenase), ACTB (beta actin), RPL19 (ribosomal protein 19) and EMD (emerin) were selected as the most appropriate reference genes and the relevant primers used in qRT‐PCR were shown in Table S1. The melt curve was added automatically to verify amplification efficiency and no template control reactions (Bio‐Rad). The 0.005, 0.05, 0.5, 5 and 50 ng cDNA were used to test the amplification efficiency. The correlation coefficient (r ²) was between 0.9312 and 0.9992, whereas the slope was −1.922 to −2.925 (Figure S2). The gene expression levels were calculated based on geNorm and 2^{−ΔΔ C T} method and we performed two‐tailed Student's t test to compare the differential expressions in various tissues from two adult cattle breeds.

2.4. Statistical analyses

Hardy–Weinberg equilibrium (HWE) was tested using the Predictive Analytics Software (PASW) (version 18) based on the chi‐squared test. Population genetic coefficients including effective allele numbers (Ae), expected heterozygosis (He) and polymorphism information content (PIC) were analysed based on Nei's methods (Nei & Roychoudhury, 1974). Linkage disequilibrium (LD) and haplotypes were analysed by SHEsis software (http://analysis.bio‐x.cn) (Li et al., 2009). We used 499 samples, including 322 QC and 177 XN cattle for diversity analyses, LD and haplotypes. Association analysis was evaluated using linear model by R package multcomp (version 1.4‐10) in 311 samples including QC (n = 141) and XN (n = 170) cattle at the same age (2 year‐old). The preliminary statistical analyses indicated that birth years, seasons and farms did not have significant associations with growth traits, so we used two‐way analysis of variance (ANOVA) for the five growth traits in 2‐year‐old QC and XN cattle. The models were as follows:

$$Y_{\mathit{ij}}=\mu +{\text{Breed}}_i+{\text{Marker}}_j+e_{\mathit{ij}}$$

where Y is the growth trait, μ is the overall mean of each trait, Breed is the cattle breed (i.e. QC and XN cattle), Marker is the SNP (SNP1, SNP2 and SNP3) and the pairwise interacted SNP (SNP1‐SNP2, SNP1‐SNP3, SNP2‐SNP3 and SNP1‐SNP2‐SNP3) and e is the residual error. Multiple comparisons were performed for SNPs and their interactions using least significance difference (LSD) method based on R package agricolae (version 1.3‐1).

3. RESULTS

3.1. Identification and genetic characteristic of genetic variants within MXD3 gene

The bovine MXD3 is located at position ~40.1 Mb on Bos taurus autosome (BTA) 7 and consists of 6 introns and 7 exons. In this study, we identified three SNPs, i.e. g.2694 C>T (dbSNP Accession No. rs41593136, intron‐SNPs) in intron 3, g.3801 T>C (dbSNP Accession No. rs110929899, intron‐SNPs) in intron 5 and the g.6263 G>A (dbSNP Accession No. rs41255197, 3′UTR‐SNP), which was located in the 3′‐untranslated region (3′‐UTR) within the MXD3 (Figure 1). In general, the predominant genotypes were heterozygous with frequencies above 0.500 except for the homozygous CC genotype at position g.2694 C>T, which was the most frequent in XN cattle. The frequencies of the C alleles of the two intron‐SNPs and the C and G allele in 3′UTR‐SNP were greater than 0.5 in both breeds. According to the results of chi‐squared test, the genotypes deviate from HWE except for g.3801 T>C in QC cattle and g.6263 G>A in both breeds (p > .05). In addition, He and Ne were approximately 0.5 and 2.0, respectively, and the PIC values were close to 0.37, indicating medium genetic diversity in the MXD3 locus in the QC and XN populations (Table 1).

Figure 1.

Electrophoresis patterns of three loci and structure diagram within MXD3 gene. (a) g.2694 C>T: TT = 101+25 bp, TC = 126 + 101 + 25 bp, CC = 126 bp. (b) g.3801 T>C: TT = 298 bp, TC = 298 + 237 + 25 bp, CC = 237 bp. (c) g.6263G>A: GG = 183 bp, GA = 183 + 108 + 75 bp, AA = 108 + 75 bp. Some fragments were too short to be visible. M denote the size marker. Green colour represents the exons and the grey colour represents the introns of MXD3

Table 1.

Population genetic analysis of MXD3 in four Chinese native cattle breeds

Loci	Breeds	Genotype frequencies			AF		P(HWE)	Ne	He	PIC
		CC	TC	TT	C	T
g.2694 C>T	QC(322)	0.320 (103)	0.559 (180)	0.121 (39)	0.599	0.401	p < .1	1.924	0.48	0.365
	XN(177)	0.458 (81)	0.384 (68)	0.158 (28)	0.650	0.350	p < .1	1.835	0.455	0.352
g.3801 T>C	QC(317)	0.320 (89)	0.559 (154)	0.121 (74)	0.524	0.476	p > .5a	1.996	0.499	0.374
	XN(177)	0.215 (38)	0.616 (109)	0.169 (30)	0.523	0.477	p < .1	1.996	0.499	0.374
		AA	AG	GG	A	G
g.6263 A>G	QC(322)	0.211 (68)	0.509 (164)	0.280 (90)	0.466	0.534	p > .5a	1.991	0.498	0.374
	XN(177)	0.175 (31)	0.525 (93)	0.299 (53)	0.438	0.562	p > .5a	1.97	0.492	0.371

Abbreviations: AF, Allele frequencies; He, Expected heterozygosity; Ne, Effective allele numbers; P(HWE), P values of Hardy–Weinberg equilibrium; PIC, Polymorphism information content; QC, Qinchuan cattle; XN, Xianan cattle.

^aRepresented the breed was in Hardy–Weinberg equilibrium.

3.2. LD and haplotype information analysis

Next, we calculated the LD parameters r ² and D′ for all pairs of the three SNP loci (Figure 2). Moderate‐to‐strong LD was observed among the three loci in QC cattle (D′ ≥ 0.73 and r ² ≥ 0.40), whereas in XN cattle strong LD only occurred between g.2694 C>T and g.3801 T>C loci ((D′ = 0.87 and r ² = 0.44). Haplotypes often provide more reliable information than a single marker (Mokry et al., 2014), we determined the haplotypes of the three SNPs in the populations. Eight predicted haplotypes were found with the distributions of haplotypes in QC cattle and XN cattle shown in Table 2. The H1 haplotype (‐CCG‐) had the highest frequency in both breeds (about 44%), followed by H8 haplotype (‐TTA‐) with approximately 30%.

Figure 2.

Linkage disequilibrium (LD) plots of MXD3 gene in QC and XN cattle. (a) D′ only in QC cattle; (b) D′ only in XN cattle; (c) D′ in both QC and XN cattle; (d) r ² only in QC cattle; (e) r ² only in XN cattle; (f) r ² in both QC and XN cattle. Colour scheme was on the basis of SHEsis r ² scheme that is shown in percentage (%) and the r ² value (%) between the pairwise loci were shown in each cell

Table 2.

The distribution of different haplotypes in three loci

Haplotype	Position of the three SNPs			QC	XN	Total
	g.2694T>C	g.3801T>C	g.6263A>G
H1(CCG)	C	C	G	0.45	0.42	0.44
H2(CCA)	C	C	A	0.02	0.08	0.04
H3(CTA)	C	T	A	0.10	0.10	0.10
H4(CTG)	C	T	G	0.03	0.05	0.03
H5(TCA)	T	C	A	0.02	0.01	0.02
H6(TCG)	T	C	G	0.04	0.01	0.03
H7(TTG)	T	T	G	0.02	0.08	0.04
H8(TTA)	T	T	A	0.33	0.25	0.30

Abbreviation: SNP, single‐nucleotide polymorphisms.

3.3. Association analysis between single SNP and growth traits

An association analysis was performed to provide novel information for use in breeding programs of genetically improved cattle. The growth traits encompassing BH, BL, BW, ChC and HCH were significantly different in XN and QC cattle at 2 years of age (p < .001) based on an ANOVA analysis, and in general, the XN cattle showed better performance than QC cattle (Table 3). There was no significant association between the single SNP and the growth traits in the two cattle breed separately (Tables S3 and S4). Therefore, we analyzed the three variants in the two breeds combined and the results showed that the g.2694 C>T locus was significantly associated with all growth phenotypes except BH. Compared with CT and TT genotypes at g.2694 C>T locus, the contribution of CC genotype to BW values increased by 7.49% and 3.06%, respectively. A significant association was also observed between the g.3801 T>C locus and the five traits. Here, the TC genotype had 8.45% and 7.44% higher BW values than TT and CC genotypes, respectively. Although g.6263 G>A locus had no significant associations with growth traits, there was a tendency of the GA genotype to show somewhat better performance than other genotypes (Table 3).

Table 3.

Association analysis of single SNPs with growth traits in the analysed sample

Marker	Locus	Genotype	Growth traits
			BH (cm)	BL (cm)	BW (kg)	ChC (cm)	HCH (cm)
SNP1	g.2694 C>T	CC(119)	132.26 ± 6.46a	149.15 ± 17.06a	470.16 ± 122.10a	185.78 ± 12.85a	133.12 ± 8.27a
		CT(143)	132.01 ± 6.30ab	145.41 ± 15.61b	434.95 ± 119.07b	183.78 ± 13.42ab	131.00 ± 8.15b
		TT(49)	130.99 ± 4.90b	148.63 ± 12.56a	455.78 ± 97.92a	182.01 ± 11.14b	132.72 ± 6.25a
	P		.012	.01	<.001	.01	.00100
SNP2	g.3801 T>C	CC(76)	131.39 ± 6.45ab	145.32 ± 17.13b	433.74 ± 126.09b	182.24 ± 13.63b	131.26 ± 8.47b
		TC(167)	132.22 ± 5.95a	149.55 ± 14.80a	468.62 ± 115.50a	185.19 ± 12.94a	133.14 ± 7.44a
		TT(66)	130.45 ± 6.32b	144.12 ± 16.11b	429.01 ± 109.01b	181.74 ± 11.81b	130.35 ± 8.35ab
	P		.001	<.001	<.001	<.001	<.001
SNP3	g.6263 G>A	AA(60)	131.38 ± 6.49	146.38 ± 15.35ab	449.51 ± 118.46ab	183.80 ± 12.76ab	130.95 ± 8.36b
		GA(153)	132.11 ± 5.98	148.71 ± 15.10a	459.70 ± 115.07a	184.81 ± 12.69a	132.98 ± 7.40a
		GG(98)	131.06 ± 6.28	145.87 ± 17.12b	440.59 ± 122.13b	182.02 ± 13.38b	131.39 ± 8.48b
	P		.50	.58	.27	.13	.24
Breed		XN(141)	134.85 ± 4.29a	159.00 ± 6.24a	543.78 ± 5.54a	191.89 ± 8.36a	137.85 ± 3.37a
		QC(167)	127.73 ± 5.83b	133.65 ± 12.77b	339.62 ± 64.07b	173.73 ± 10.22b	125.06 ± 6.03b
	P	<.001	<.001	<.001	<.001	<.001	<.001

LSD method was used for multiple comparisons in different genotypes at same phenotypes and values with different letters means different significantly, with p < .05 or 0.001 (a, b, c and d).

Abbreviations: BH, Body height (cm); BL, Body length (cm); BW, Body weight (kg); ChC, Ches circumference (cm); HCH, Hip cross height (cm); SNP, single‐nucleotide polymorphisms. The bold in the "Genotype" means the genotype showed higher pehnotype values.

3.4. Association analysis between combined SNPs and growth traits

To improve the reliability of the association results, we also conducted pairwise SNPs analyses (Table 4). The highest frequencies of different pairwise SNPs were CTTC (34.95%) at SNP1‐SNP2, and CTAG (25.94%) at SNP1‐SNP3 and TCAG (35.92%) at SNP2‐SNP3, respectively. Most of the pairwise variants showed impact on the different body traits (p < .01 or p < .05). For example, extremely significant associations were detected between SNP1‐SNP2 and BL, BW and HCH (p < .001). Also, significant associations were observed between SNP1‐SNP2 and the two growth traits, BH and ChC (p < .05). In addition, the CCTC combined genotype of SNP1‐SNP2 demonstrated higher performance than other combinations (Table 4). Furthermore, ten combined genotypes were identified when we conjoined the three SNPs. The data show a strong association between all growth traits and the various triple SNP combinations (Table 5). The growth traits value of cattle with CCCCGA combined genotype were 6.16% for BH, 17.55% for BL, 37.50% for BW, 8.56% for ChC and 10.61% for HCH higher than those of CTTTAA combined genotype (Table 5).

Table 4.

Association analysis of pair‐wise SNPs with growth traits in the analysed sample

	CoG	Growth traits
		BH (cm)	BL (cm)	BW (kg)	ChC (cm)	HCH (cm)
SNP1‐SNP2	CCCC(58)	131.52 ± 6.86bc	145.45 ± 18.71bc	442.67 ± 131.17bc	183.24 ± 13.91b	131.71 ± 8.97b
	CCTC(54)	134.00 ± 5.13a	155.09 ± 12.35a	513.80 ± 95.46a	189.42 ± 10.86a	136.01 ± 5.74a
	CCTT(6)	123.67 ± 5.65d	131.50 ± 17.12c	349.70 ± 81.73c	177.50 ± 10.45b	120.83 ± 6.08d
	CTCC(15)	130.87 ± 5.07bcd	145.60 ± 10.97bc	418.12 ± 110.07bc	179.73 ± 13.11b	130.23 ± 6.96bc
	CTTC(108)	131.44 ± 6.22bc	146.81 ± 15.44bc	447.04 ± 119.77b	183.01 ± 13.40b	131.79 ± 7.88b
	CTTT(19)	128.53 ± 7.32cd	137.26 ± 17.77c	379.52 ± 109.60c	178.11 ± 13.58b	127.05 ± 9.58cd
	TTCC(3)	131.33 ± 6.02bcd	141.33 ± 12.42bc	364.51 ± 67.83c	175.33 ± 10.21b	127.83 ± 4.80bcd
	TTTC(5)	129.80 ± 4.09bcd	148.80 ± 8.04abc	446.78 ± 92.08bc	186.60 ± 14.62ab	131.20 ± 5.80bc
	TTTT(41)	132.33 ± 4.96ab	149.15 ± 13.08ab	463.56 ± 98.68b	184.05 ± 10.76b	133.26 ± 6.32ab
	P	.001	<.001	<.001	.014	<.001
SNP1‐SNP3	CCAA(10)	133.90 ± 7.49ab	159.40 ± 9.29a	551.28 ± 90.71a	194.10 ± 11.64a	135.90 ± 8.81ab
	CCGA(53)	133.98 ± 5.84a	153.40 ± 14.25ab	499.87 ± 105.54ab	188.72 ± 10.93ab	135.73 ± 6.88ab
	CCGG(56)	130.22 ± 6.36ab	142.98 ± 18.56d	425.49 ± 126.29c	181.23 ± 13.37c	129.98 ± 8.47d
	CTAA(27)	130.70 ± 6.94ab	144.26 ± 17.07cd	441.17 ± 125.76bc	183.00 ± 12.93bc	129.81 ± 9.14d
	CTGA(83)	130.86 ± 6.09ab	144.82 ± 15.29cd	426.79 ± 116.01c	181.79 ± 13.47c	130.84 ± 7.49bcd
	CTGG(33)	131.64 ± 6.37ab	147.76 ± 15.20bcd	448.24 ± 122.06bc	181.55 ± 13.91c	132.38 ± 8.82abcd
	TTAA(23)	131.07 ± 5.42ab	143.22 ± 12.61cd	415.04 ± 97.66c	180.26 ± 11.02c	130.136.58cd
	TTGA(17)	132.18 ± 4.17ab	151.59 ± 11.83abc	484.04 ± 92.47abc	185.94 ± 10.62abc	134.21 ± 5.27abc
	TTGG(9)	134.11 ± 4.57a	156.89 ± 7.10 ab	506.51 ± 69.77ab	188.67 ± 10.61abc	136.56 ± 4.42a
	P	.045	<.001	<.001	.003	<.001
SNP2‐SNP3	CCAA(7)	133.86 ± 4.63ab	155.29 ± 9.03ab	521.64 ± 95.11a	190.57 ± 8.70ab	134.43 ± 5.32ab
	CCGA(22)	134.36 ± 6.43a	155.77 ± 10.23a	521.29 ± 97.44a	189.91 ± 10.79ab	136.75 ± 7.48a
	CCGG(47)	129.63 ± 6.16b	138.94 ± 17.63c	381.28 ± 111.95b	177.40 + 13.32c	128.22 ± 7.89c
	TCAA(21)	133.71 ± 5.45ab	154.90 ± 11.51ab	521.43 ± 99.81a	190.95 + 11.56a	134.67 ± 8.01ab
	TCGA(111)	131.81 ± 5.96ab	147.69 ± 15.27b	448.87 ± 115.78a	183.99 ± 13.26b	132.43 ± 7.22b
	TCGG(35)	132.60 ± 6.17ab	152.23 ± 14.15ab	499.54 ± 109.20a	185.57 ± 12.04ab	134.49 ± 7.69ab
	TTAA(32)	129.30 ± 6.87b	138.84 ± 14.87c	386.53 ± 98.76b	177.63 ± 11.16c	127.75 ± 7.96c
	TTGA(18)	131.22 ± 5.16ab	146.22 ± 17.15bc	454.01 ± 109.61a	183.67 ± 10.03 bc	131.78 ± 7.38bc
	TTGG(16)	131.88 ± 6.31ab	152.31 ± 14.07ab	485.87 ± 98.33a	187.81 ± 12.39ab	133.94 ± 8.90ab
	P	.02	<.001	<.001	<.001	<.001

LSD method was used for multiple comparisons in different pairwise SNPs at the same phenotypes. The values with different letters means different significantly, with p < .05, .01 or .001 (a, b, c and d).

Abbreviations: BH, body height (cm); BL, body length (cm); BW, body weight (kg); ChC, Ches circumference (cm); HCH, hip cross height; SNP, single‐nucleotide polymorphisms.

Table 5.

Association analysis of combined three SNPs with growth traits in the analysed sample

CoG	Growth traits
SNP1SNP2SNP3	BH (cm)	BL (cm)	BW (kg)	ChC (cm)	HCH (cm)
CCCCGA(17)	135.76 ± 5.45a	158.65 ± 5.98a	545.53 ± 64.90a	191.71 ± 6.94a	139.06 ± 4.89a
CCCCGG(37)	129.23 ± 6.74cd	137.76 ± 19.19de	380.76 ± 118.54c	178.05 ± 14.18c	127.78 ± 8.47de
CCTCGA(32)	134.16 ± 5.26a	154.22 ± 12.94a	499.02 ± 101.69a	189.13 ± 11.48a	135.70 ± 5.77ab
CCTCGG(17)	132.82 ± 5.03ab	154.41 ± 12.29a	524.33 ± 88.53a	187.59 ± 9.10ab	135.41 ± 6.21ab
CTTCAA(15)	132.93 ± 5.64ab	152.73 12.13ab	506.48 ± 110.48a	188.13 ± 11.37ab	133.40 ± 8.65bc
CTTCGA(75)	130.90 ± 6.08bcd	144.83 15.69	428.17 ± 116.78b	181.83 ± 13.47bc	131.04 ± 7.45c
CTTCGG(18)	132.39 ± 7.22abc	150.17 ± 15.77abc	476.14 ± 123.61ab	183.67 ± 14.29abc	133.61 ± 8.96bc
CTTTAA(10)	127.40 ± 7.90d	130.80 ± 16.45e	340.94 ± 84.09c	175.30 ± 13.04c	124.30 ± 7.76e
TTTTAA(21)	130.88 ± 5.51bcd	142.76 ± 13.12cd	410.56 ± 100.85bc	179.00 ± 10.49c	130.14 ± 6.84cd
TTTTGA(12)	133.50 ± 3.32ab	154.42 ± 10.71a	515.51 ± 67.25a	188.33 ± 8.27ab	135.7 ± 53.96ab
P	.001	<.001	<.001	<.001	<.001

LSD method was used for multiple comparisons in different combined SNPs at the same phenotypes. The values with different letters means different significantly, with p < .05, .01 or .001 (a, b, c, d and e).

Abbreviations: BH, body height (cm); BL, body length (cm); BW, body weight (kg); ChC, ches circumference (cm); HCH, hip cross height; SNP, single‐nucleotide polymorphisms.

3.5. Detection of expression levels of MXD3 in seven different tissues

To assess and compare the expression level of MXD3 in different tissues, we first determine which reference genes would be most suitable for normalization. As shown in Figure 3a, geNorm ranked RPL19 and EMD as the best combination for gene expression normalization in various cattle tissues. Delta CT, BestKeeper and Normfinder suggested a single reference gene EMD (Figure 3a and Figure S3). Therefore, we used two approaches to normalize the MXD3 expression level based on our results: (a) A geometric mean of the two most stably expressed genes (RPL19 and EMD) combined as suggested by Vandesompele et al. (2002), (b) Using a single best gene EMD as suggested by the 2^{−ΔΔ C T} method. The data shown in Figure 3 demonstrate that the MXD3 expression levels as measured by the two different methods were highly consistent. Furthermore, we observed that the MXD3 gene showed the highest expression level in spleen, followed by muscle and fat in QC cattle, whereas, in XN cattle, the highest expression was found in the liver followed by heart and muscle (Figure 3b–e). It is also noteworthy that the MXD3 was differently expressed in the seven tissues between two breeds based on t test (p < .001 or p < .05) (Figure 3f).

Figure 3.

Expression profiles of MXD3. (a) Reference genes choice; (b) MXD3 expression level in QC cattle using GeNorm methods. (c) MXD3 expression level in XN cattle using GeNorm methods; (d) MXD3 expression level in QC cattle using 2^{−ΔΔ C T} methods. (e) MXD3 expression level in XN cattle using 2^{−ΔΔ C T} methods. (f) MXD3 expression level in two breeds using 2^{−ΔΔ C T} methods. ***denote p < .001 and *denote p < .05. “I” represented standard deviations of three biological replicates for each tissue

4. DISCUSSION

Cattle have the ability to convert low‐quality forage into high‐quality food such as milk and beef, which are important sources of human nutrition. However, Chinese indigenous cattle with inferior productivity indexes cannot satisfy the increasing demand for beef production in China. Over recent years, researchers have investigated the genetic basis of many complex phenotypes and many polymorphisms in various functional genes have been reported associated with cattle economic important traits, suggesting they may be useful as markers for the genetic improvement of cattle (Bouwman et al., 2018). In this study, we investigated the expression profiles of the MXD3 gene and evaluated the possible association of sequence variants with growth traits in XN and QC cattle. The MXD3 plays important regulatory roles in physiological processes such as cellular proliferation and differentiation and mutations in MXD3 are associated with tumorigenesis, i.e. leukaemia and medulloblastomas (Barisone et al., 2012; Ngo, Barisone, Lam, & Daz, 2014; Ngo et al., 2019; Satake et al., 2014, 2016). In our study, we identified three SNPs within MXD3 (SNP1: g.2694 C>T; SNP2: g.3801 T>C and SNP3: g.6263 G>A) and excavated the potential relations between three SNPs and cattle growth traits. Our data showed ubiquitous expression of MXD3, yet at highly variable levels, in all the tissues that we investigated. Importantly, the expression data were obtained using two different approaches for accurate normalization. Thus, many commonly used housekeeping (HK) genes employed in qRT‐PCR studies often exhibit tissue‐dependent variation (Lin & Redies, 2012). Therefore, we first carefully determined the optimal strategies for normalization using Delta CT, BestKeeper and Normfinder methodology in the RefFinder tool, resulting in reliable and consistent expression data. In QC cattle, MXD3 was highly expressed in spleen, muscle and fat tissues, while transcription was highest in liver, muscle and heart tissues in XN cattle. Overall, this is in accordance with the finding that the MXD3 have an important role in regulating B‐cell differentiation (Gore, Lantner, Hart, & Shachar, 2010) and furthermore that the MXD3 was highly expressed in obese individuals (Shimada et al., 2014). It is noteworthy that the MXD3 expression profiles were quite different between the two genetically different cattle breeds. Thus, the QC cattle is one of the top five Chinese yellow indigenous cattle breeds, whereas the XN cattle is a new crossbreed with French Charolais cattle and Chinese Nanyang cattle. It is possible that the observed breed‐specific MXD3 expression profiles may contribute to the phenotypic differences between QC and XN cattle.

We identified two intronic SNPs (g.2694 C>T and g.3801 T>C) and one SNP (g.6263 G>A) in the 3′UTR of MXD3, which we suggest could be used to promote the genetic improvement of Chinese cattle. Thus, a major result of this study is the observations of strong associations between pairwise and triple SNP combinations and the performance traits measured in the two breeds. Another noticeable example of non‐coding SNPs with phenotypic impact is a mutation 4251 nt (C>T) in intron 1 of the growth hormone‐releasing hormone (GHRH) gene, which was significantly associated with body weight in QC cattle (Zhang et al., 2012). Non‐coding SNPs may have effects on mRNA metabolism by transcriptional enhancement or repression, or by influencing nucleosome‐positioning elements in the gene or via an effect on the assembly of spliceosome components (Le Hir, Nott, & Moore, 2003). Interestingly, the TargetScan algorithm predicts that the 3′UTR‐SNP (g.6263 G>A) in MXD3 may decrease its interaction with bta‐miR‐22‐3p. This agrees well with the previous observation that bta‐miR‐22‐3p is associated with cattle development based on genome‐wide profiles on muscle tissue between fetal and adult QC cattle (Agarwal, Bell, Nam, & Bartel, 2015; Huang et al., 2014; Sun et al., 2015). However, further studies are needed to confirm the interaction between miR‐22‐3p and 3′‐SNP in MXD3 and to better understand how this affects complex phenotypes.

The detection of gene variants associated with economically important traits has provided insights into the genetic architecture of complex traits and diseases in cattle (Bouwman et al., 2018; Suravajhala, Kogelman, & Kadarmideen, 2016). Recently, researchers have paid increased attention to the integration of muti‐omic data, which will provide a system‐level understanding of the biology of complex traits and be instrumental in improving sustainable breeding of productive and healthy animals (Suravajhala et al., 2016). Thus, future use of present and emerging omics‐technologies will be applied to collaboration with breeders and farmers.

CONFLICT OF INTEREST

The authors declare that they have no conflict of interest.

AUTHOR CONTRIBUTION

DH performed the experiments, analysed the data, and DH and BT drafted the manuscript. JSB and XW improved the manuscript. SJP, XYL and YZH developed and collected the samples. HC and XW conceived and designed the study, reviewed the study and supervised the research.

ETHICAL APPROVAL

All animal procedures were carried out according to protocols approved by the College of Animal Science and Technology, Northwest A&F University, China.

Supporting information

 

Hao D, Thomsen B, Bai J, et al. Expression profiles of the MXD3 gene and association of sequence variants with growth traits in Xianan and Qinchuan cattle. Vet Med Sci. 2020;6:399–409. 10.1002/vms3.251

DATA AVAILABILITY STATEMENT

The data that support the findings of this study are available from the corresponding author upon reasonable request.