From the editor
We hereby apologize for the omission of conflict of interest disclosures on certain articles published in Volume 5 Issue 1 (2019), Volume 5 Issue 2 (2019), Volume 5 Issue 2.1 (2019), Volume 6 Issue 1 (2020), Volume 6 Issue 2 (2020), Volume 6 Issue 4 (2020) of International Journal of Bioprinting.
DOI: 10.18063/ijb.v6i4.309
Published Online: September 17, 2020
Correction
Mir T A, Nakamura M, Iwanaga S, et al., 2019, Biofabrication offers future hope for tackling various obstacles and challenges in tissue engineering and regenerative medicine: A Perspective. Int J Bioprint, 5(1):153. http://dx.doi.org/10.18063/ijb.v5i1.153
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Cheptsov VS, Tsypina SI, Minaev NV, et al., 2019, New microorganism isolation techniques with emphasis on laser printing. Int J Bioprint, 5(1): 165.http://dx.doi.org/10.18063/ijb.v5i1.165
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“We have no conflict of interest to declare.”
Correction
Gao D, Zhou JG, 2019, Designs and applications of electrohydrodynamic three-dimensional printing. Int J Bioprint, 5(1): 172. http://doi.org/10.18063/ijb.v5i1.172
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“We have no conflict of interest to declare.”
Correction
Rodriguez-Salvador M, Ruiz-Cantu L, 2018. Revealing emerging science and technology research for dentistry applications of 3D bioprinting. Int J Bioprint, 5(1): 170. http://dx/doi.org/10.18063/ijb.v5i1.170
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Moldovan NI, Moldovan L, Raghunath M, 2019, Of balls, inks and cages: Hybrid biofabrication of three-dimensional tissue analogs. Int J of Bioprint, 5(1): 167. http://dx/doi.org/10.18063/ijb.v5i1.167
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Gao D, Yao D, Leist SK, Fei Y, Zhou J, 2018, Mechanisms and modeling of electrohydrodynamic phenomena. Int J Bioprint, 5(1): 166. http://dx/doi.org/10.18063/ijb.v5i1.166
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Sun J, Jing L, Fan X, Gao X, Liang YC, 2019, Electrohydrodynamic printing process monitoring by microscopic image identification. Int J Bioprint, 5(1): 164. http://dx.doi.org/10.18063/ijb.v5i1.164
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Zhang Y, 2019, 3D-Printing for microfluidics or the other way around? Int J Bioprint, 5(2):192. http://dx.doi.org/10.18063/ijb.v5i2.192
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the author.”
Correction
Mishbak HH, Cooper G, Bartolo PJ, 2019, Development and characterization of a photocurable alginate bioink for three dimensional bioprinting. Int J Bioprint, 5(2): 189. http://dx.doi.org/10.18063/ijb.v5i2.189
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Feng F, He J, Li J, et al., 2019, Multicomponent bioprinting of heterogeneous hydrogel constructs based on microfluidic printheads. Int J Bioprint, 5(2): 202. http://dx.doi.org/10.18063/ijb.v5i2.202
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Shuai C J, Yang W J, Yang Y W, et al., 2019, A continuous net-like eutectic structure enhances the corrosion resistance of Mg alloys. Int J Bioprint, 5(2): 207. http://dx.doi.org/10.18063/ijb.v5i2.207
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding authors again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Yao R, Alkhawtani AYF, Chen R, et al., 2019, Rapid and efficient in vivo angiogenesis directed by electro-assisted bioprinting of alginate/collagen microspheres with human umbilical vein endothelial cell coating layer. Int J Bioprint, 5(2.1): 194. http://dx.doi.org/10.18063/ijb.v5i2.1.194
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding authors again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Vijayavenkataraman S, Vialli N, Fuh JYH, et al., Conductive collagen/polypyrrole-b-polycaprolactone hydrogel for bioprinting of neural tissue constructs. Int J Bioprint, 5(2.1): 229. http://dx.doi.org/10.18063/ijb.v5i2.1.229
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding authors again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Ng W L, Yeong W Y, 2019, The future of skin toxicology testing – Three-dimensional bioprinting meets microfluidics. Int J Bioprint, 5(2.1): 237. http://dx.doi.org/10.18063/ijb.v5i2.1.237
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Yu C, Jiang J, 2020, A perspective on using machine learning in 3D bioprinting. Int J Bioprint, 6(1):253. http://dx.doi.org/10.18063/ijb.v6i1.253
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Huyan Y, Lian Q, Zhao T, et al., 2020, Pilot study of the biological properties and vascularization of 3D printed bilayer skin grafts. Int J Bioprint, 6(1):246. http://dx.doi.org/10.18063/ijb.v6i1.246
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Shuai C, Li S, Peng S, et al., 2020, Hydrolytic expansion induces corrosion propagation for increased Fe biodegradation. Int J Bioprint, 6(1):248. http://dx.doi.org/10.18063/ijb.v6i1.248
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Shuai C, Li Y, Yang W, et al., 2020, Graphene oxide induces ester bonds hydrolysis of poly-l-lactic acid scaffold to accelerate degradation. Int J Bioprint, 6(1):249. http://dx.doi.org/10.18063/ijb.v6i1.249
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Cristescu R, Negut I, Visan AI, et al., 2020, Matrix-assisted pulsed laser evaporation-deposited rapamycin thin films maintain antiproliferative activity. Int J Bioprint, 6(1):188. http://dx.doi.org/10.18063/ijb.v6i1.188
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Agarwala, 2020. Electrically Conducting Hydrogels for Health care: Concept, Fabrication Methods, and Applications, Int J Bioprint, 6(2):273 http://dx.doi.org/10.18063/ijb.v6i2.273
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“The author has no conflict of interest to declare.”
Correction
Zolfagharian A, Gregory TM, Bodaghi M, et al., 2020, Patient-specific 3D-printed Splint for Mallet Finger Injury. Int J Bioprint, 6(2):259. http://dx.doi.org/10.18063/ijb.v6i2.259
The conflict of interest statement was unintentionally omitted by the publisher due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Zolfagharian A, Denk M, Kouzani AZ, et al., 2020, Effects of Topology Optimization in Multimaterial 3D Bioprinting of Soft Actuators, Int J Bioprint, 6(2):260. http://dx.doi.org/10.18063/ijb.v6i2.260
The conflict of interest statement was unintentionally omitted by the publisher due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Kolan KCR, Huang YW, Semon JA, et al., 2020, 3D-printed Biomimetic Bioactive Glass Scaffolds for Bone Regeneration in Rat Calvarial Defects. Int J Bioprint, 6(2): 274. http://dx.doi.org/10.18063/ijb.v6i2.274
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
Wong Y, Xu Y, Kang L, et al., 2020, Development of a 3D-printed medication label for the blind and visually impaired, Int J Bioprint, 6(2):276. http://dx.doi.org/10.18063/ijb.v6i2.276
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding authors again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”
Correction
He H, Gao M, Illés B, et al., 3D Printed and Electrospun, Transparent, Hierarchical Polylactic Acid Mask Nanoporous Filter, Int J Bioprint, 6(4): 278. http://dx.doi.org/10.18063/ijb.v6i4.278
The conflict of interest statement was unintentionally omitted due to technical issue. After confirming with the corresponding author again, the conflict of interest statement should have been as follows:
“No conflict of interest was reported by the authors.”