Skip to main content
Scientific Reports logoLink to Scientific Reports
. 2020 Oct 19;10:17613. doi: 10.1038/s41598-020-72873-z

Geometric morphometric wing analysis represents a robust tool to identify female mosquitoes (Diptera: Culicidae) in Germany

F G Sauer 1,, L Jaworski 1,2, L Erdbeer 1, A Heitmann 2, J Schmidt-Chanasit 2,3, E Kiel 1, R Lühken 2,3,
PMCID: PMC7573584  PMID: 33077803

Abstract

Accurate species identification is the prerequisite to assess the relevance of mosquito specimens, but is often hindered by missing or damaged morphological features. The present study analyses the applicability of wing geometric morphometrics as a low-cost and practical alternative to identify native mosquitoes in Germany. Wing pictures were collected for 502 female mosquitoes of five genera and 19 species from 80 sampling sites. The reliable species identification based on interspecific wing geometry of 18 landmarks per specimen was tested. Leave-one-out cross validation revealed an overall accuracy of 99% for the genus and 90% for the species identification. Misidentifications were mainly due to three pairings of Aedes species: Aedes annulipes vs. Aedes cantans, Aedes cinereus vs. Aedes rossicus and Aedes communis vs. Aedes punctor. Cytochrome oxidase subunit I (COI) gene region was sequenced to validate the morphological and morphometric identification. Similar to the results of the morphometric analysis, the same problematic three Aedes-pairs clustered, but most other species could be well separated. Overall, our study underpins that morphometric wing analysis is a robust tool for reliable mosquito identification, which reach the accuracy of COI barcoding.

Subject terms: Entomology, Phylogenetics, Classification and taxonomy

Introduction

Mosquitoes (Diptera: Culicidae) are a widespread taxonomic group, which occurs from tropical to subarctic regions. Worldwide, 3578 mosquito species are currently known1. The females of most species are obligate hematophagous and thereby are important vectors and reservoirs of pathogens threatening billions of people all over the world. Global warming and globalization facilitate the spread and emergence of several agents of disease2,3. Outbreaks of West Nile virus (WNV)4,5 or chikungunya virus6 highlight the relevance of mosquito-borne diseases in Southern Europe. Furthermore, the ongoing Usutu virus circulation710 as well as the recent outbreaks of WNV11 underpin the increasing risk of mosquito-borne diseases also in Central Europe.

Vector capacity varies between different mosquito species, e.g. species-specific host preferences12 or vector competence13. Accordingly, accurate species identification is the prerequisite to understand patterns of pathogen transmission. Mosquitoes are commonly identified by morphology, e.g. Becker et al.14. Thereby, the identification requires considerable knowledge about the variation of the different taxonomic characters. In addition, important morphological characteristics such as legs or scales are often missing for field sampled specimens, hampering an accurate identification.

Geometric morphometrics is a promising alternative technique to identify insect species using anatomical landmarks15. Landmark collections are a cost-effective technique, which requires very little entomological experience compared to standard morphological identification. Its application increased distinctly in mosquito studies during the last two decades16. Hereby, usually the wings are used for the morphometrical diagnosis. Mosquitoes’ wing geometry is related to species-specific wing beat frequencies, which mediate the assortative mating behaviour17. In addition, the two-dimensional shape and the natural anatomical junctions of wing veins are ideal for the collection of landmarks16. It was shown before that the analyses of landmark configurations can be used to reliably identify mosquito species1820, even if morphological identification with standard taxonomic keys is not possible e.g., female Culex pipiens pipiens form pipiens Linnaeus vs. Culex torrentium Martini21. However, the usage of morphometric wing analyses is largely underrepresented in European mosquito research. To the authors’ knowledge, only three studies applied morphometric wing analysis to native mosquito species in Europe. Intraspecific variations of mosquito wings were analysed for European population of Aedes vexans (Meigen)22 and Cx. pipiens s.l.23. Börstler et al.21 used morphometric diagnosis to discriminate female Cx. pipiens s.s. and Cx. torrentium.

The here presented study gives a comprehensive evaluation of this low-budget tool for the identification of a broad range of mosquito species. The morphometric wing characteristics for 19 of the most common mosquito species of Germany were analysed to evaluate the usability for species discrimination. In addition, we sequenced the COI gene to validate morphological and morphometric identification.

Methods

Mosquito sampling

The right wings of 502 females of 19 mosquito species were analysed (Table 1). Varying environmental conditions can influence the intraspecific shape and size of mosquito wings24,25. Hence, specimens were collected at 80 study sites (Fig. 1), covering different landscapes of Germany to capture a broad morphological variation per species. Mosquitoes were sampled over the seasons of 2017 and 2018. Adults were sampled with two different methods: CO2-baited Biogents-traps (Biogents, Regensburg, Germany) or hand-made aspirators modified from Vazquez-Prokopec et al.26. Immature stages were sampled with a standard dipper (Bioquip, CA, USA) in breeding sites and subsequently reared to adults in the laboratory. All specimens were identified by morphology14,27 and stored at − 18 °C in a freezer until further analysis. Specimens of each species were selected from at least three different sampling sites (Table 1). The wing pictures including coordinates of the sampling location, sampling date and sampling method for each specimen are given in the supplementary material (10.5061/dryad.zs7h44j5s).

Table 1.

Mosquito species, abbreviations, number of sampling sites per species and number of specimens (N) used in this paper.

Scientific name Abbreviation Sampling sites N
Aedes annulipes (Meigen, 1830) Ae_ann 13 30
Aedes cantans (Meigen, 1818) Ae_can 15 30
Aedes caspius (Pallas, 1771) Ae_cas 6 17
Aedes cinereus Meigen, 1818 Ae_cin 11 30
Aedes communis (de Geer, 1776) Ae_com 12 29
Aedes geniculatus (Olivier, 1791) Ae_gen 13 24
Aedes punctor (Kirby, 1837) Ae_pun 13 30
Aedes rossicus Dolbeskin, Gorickaja and Mitrofanova 1930 Ae_ross 3 14
Aedes rusticus (Rossi, 1790) Ae_rust 12 29
Aedes sticticus (Meigen, 1838) Ae_stic 14 30
Aedes vexans (Meigen, 1830) Ae_vex 16 30
Anopheles claviger (Meigen, 1804) An_clav 16 30
Anopheles messeae Falleroni, 1926 An_mess 13 19
Anopheles plumbeus (Stephens, 1828) An_pb 13 30
Coquillettidia richiardii (Ficalbi, 1889) Cq_rich 11 30
Culex pipiens pipiens form pipiens Linnaeus, 1758 Cx_pip 5 18
Culex territans (Walker, 1856) Cx_terr 13 22
Culiseta annulata (Schrank, 1776) Cs_ann 19 30
Culiseta morsitans (Theobald, 1901) Cs_mors 17 30

Figure 1.

Figure 1

Mosquito sampling sites in Germany (black points). Latitude and longitude are based on the coordinate reference system WGS84.

Measuring wing shape

The right wing of each specimen was removed and mounted under a cover slip (15 × 15 mm) with Euparal (Carl Roth, Karlsruhe, Germany). Pictures of each wing were taken under 20× magnification with a stereomicroscope (Leica M205 C, Leica Microsystems, Wetzlar, Germany). Fiji28 as bioscience package of ImageJ29 was used to digitize 18 landmarks (Figure S1). The landmark selection was in accordance with other studies analysing mosquito wing morphometry1820,30. The wing pictures were divided among two observers (authors LE and FGS) and digitalised in random order to minimize a memory biased landmark collection between the mosquito specimens of the same species. One month later, the measurement was repeated for three specimens per species by four observers (authors LE, LJ, RL and FGS) to assess the degree of observer error and repeatability in landmark collection31.

Genetic identification

DNA isolation was performed from the whole mosquito body, except of the right wing. Individual specimens were placed into 2 ml tubes and about 10 pieces of 2.0 mm zirconia beads (BioSpec Products, Bartlesville, USA) as well as 1 ml of cell culture medium (high-glucose Dulbecco’s modified Eagle’s medium; Sigma-Aldrich, St. Louis, MO, USA) were added. The homogenization was performed with a Tissuelyser II (Qiagen, Hilden, Germany) for 2 min at 30 oscillations/s and 200 μl of the homogenate were used for DNA extraction, which was performed with KingFisher Flex Magnetic Particle Processor using MagMAX CORE Nucleic Acid Purification Kit (both Thermo Fisher Scientific, Waltham, MA, USA). Polymerase chain reaction (PCR) amplification of cytochrome oxidase subunit I (COI) gene region was conducted with the protocol published by Fang et al.32 using the primers by Folmer et al.33. Sanger sequencing was applied for all positive amplicons (LGC Genomics, Berlin, Germany). Furthermore, morphologically identified Cx. pipiens s.l. and An. maculipennis s.l. specimens were typed to species level (Cx. pipiens pipiens form pipiens resp. Anopheles messeae) using two molecular assays34,35.

Statistical analysis

Generalised Procrustes analysis of the two-dimensional landmark data set was performed to create aligned Procrustes coordinates and centroid size of each specimen with the R package geomorph36. The centroid size is defined as the square root of the sum of squared distances between centroid and each landmark37 and can be used as a proxy for wing size38. Mean difference in centroid size per species were compared by an analysis of variance (ANOVA), followed by pairwise comparisons of species using t-tests with Bonferroni-adjusted p-values. During the Procrustes analysis, raw landmark coordinates were centred, scaled and rotated, so that the resulting Procrustes coordinates describe the wing shape in itself39. Allometric effects of the centroid size on wing shape were assessed by the “procD.allometry” function from the geomorph package36 using 500 permutations. Wing shape variables were analysed by linear discriminant analyses (LDA) to classify genus and species, respectively (R package MASS40). Subsequently, each specimen was reclassified by a leave-one-out cross validation in order to test the classification obtained by the discriminant analysis. The mean shape configuration of the landmarks was used to visualize shape differences between the genera. In addition, a neighbour joining tree (NJ) was constructed to display the Mahalanobis distances between species means in a canonical variate analysis, using the functions “CVA” in Morpho41 and “nj”, “boot.phylo” and “drawSupportOnEdge” in ape42. Robustness of nodes was assessed by 1000 bootstrap replicates. To assess the degree of observer error, the shape variance due to the repeated measurements per specimen was compared with the mean shape variance per species of the original data set without repeated landmark collections. Therefore, shape variances were calculated by the “morphol.disparity” function in geomorph36 using 500 permutations. Furthermore, we assessed the fidelity of morphological characterization of our landmark data set through a Landmark Sampling Evaluation Curve (LaSEC) by using the function of Watanabe43. All analyses and visualisation including the R package ggplot244 were carried out in the R environment45.

Sequences were pre-processed with Geneious 9.1.8 (Biomatters, Auckland, New Zealand). COI sequences were trimmed to 550 bp. To assess the phylogenetic relationship of the mosquito species identified in this study, a maximum likelihood tree was constructed using functions of the R packages seqinr46, ape42 and phangorn47,48. The HKY + G model was identified as the best-fit model of nucleotide substitution by the phangorn’s “modelTest” function based on calculations of Akaikeʼs information criterion. Robustness of nodes was assessed by 1000 bootstrap replicates. The COI sequences generated in this study were deposited in the GenBank database under the accession numbers MT731082–MT731276.

Results

The mean centroid size differed significantly among the mosquito species (ANOVA, F = 143.3, p < 0.001). Highest centroid size was observed for Culiseta morsitans (Theobald) with almost twice the centroid size compared to the smallest species in our study: Aedes caspius (Pallas), Aedes sticticus (Meigen) and Culex territans (Walker) (Fig. 2). A small, but significant allometric effect was observed (R2 = 3.7%, p = 0.002). However, allometric residues were not removed since size variations were considered to be important for the species identification process21. A pairwise cross-validated reclassification test (leave-one-out method) to compare the five genera (Aedes, Anopheles, Coquillettidia, Culiseta and Culex) revealed an accuracy greater 99% (Fig. 4). Hereby, the genus of three out of 502 specimens was misidentified. One Aedes specimen was falsely identified as Coquillettidia and two Culex specimens were misidentified as Aedes. Differences in the shape variation were strongest for Anopheles in contrast to other genera (Figs. 3 and 4). In addition, the superimposed landmark coordinates of the junctions of radius 2 and 3 as well as media 1 and 2 varied most obviously when comparing the further genera (Fig. 3). Species identification accuracy based on the pairwise reclassification test was 90%. The error rate of 10% was mainly due to the comparisons of three pairings: Aedes annulipes (Meigen) vs. Aedes cantans (Meigen), Aedes cinereus Meigen vs. Aedes rossicus Dolbeskin, Gorickaja and Mitrofanova and Aedes communis (de Geer) vs. Aedes punctor (Kirby) (Table 2). In addition, the centroid size of these pairs did not differ significantly (Table S1). Other species were reclassified with a high reliability between 94 and 100% (Table 2, Fig. 5). The NJ tree resulted in high bootstrap values for most species, including the three pairings with a high error rate in the pairwise reclassification test (Fig. 6). While members of the genus Culex and Anopheles clustered together, species from the genus Aedes and Culiseta clustered heterogeneously over the NJ tree. The landmark collections of three randomly selected specimens per species were repeated by four different observers. The mean shape variance per specimens due to the different observers was 0.00047. This was considerably lower than the mean shape variance per species (0.00123) in the original landmark data set without repeated measurements, thus indicating a relatively small observer bias for the analysis of species-specific shape variations. The LaSEC did not suggest oversampling of landmarks in our data set (Figure S2).

Figure 2.

Figure 2

Boxplots showing variation of centroid size per species in ascending order. The centroid size is displayed as non-dimensional estimator for the wing size derived from the 18 landmark coordinates.

Figure 4.

Figure 4

Visualization of the LDA showing the wing shape variation for the five analysed genera.

Figure 3.

Figure 3

Comparison of the mean shape configurations between each genus pair. The first mentioned genus is shown in black and the second mentioned genus is shown in grey.

Table 2.

Species reclassification rates in percent calculated by a cross validation test (leave-one-out method).

graphic file with name 41598_2020_72873_Tab2_HTML.jpg

Green cells highlight accurate reclassification. Red cells highlight incorrect reclassification. A list of species abbreviations is given in Table 1.

Figure 5.

Figure 5

Visualization of the LDA showing the wing shape variation for the 19 species. Species abbreviations are given in Table 1. Species labels are displayed at the calculated mean centroid of the first two discriminants. The labels of Ae. punctor, Ae. communis, Ae. cantans and Ae. annulipes strongly overlap.

Figure 6.

Figure 6

Neighbor joining tree for the species means derived from a canonical variate analysis. The tree was inferred from a Mahalanobis distance matrix (1000 bootstrap replicates). Branch support values are displayed in red numbers.

High quality, clean sequences were available for 195 mosquito specimens, covering 18 of the 19 taxa only missing the species Cx. territans (Fig. 7). In order to perform a verification of the consistency of the morphological and morphometric classification of the mosquito specimens, a maximum likelihood phylogenetic tree was constructed (Fig. 7). Most species clustered seperately. However, this was not the case for several members of the genus Aedes. The two species-pairs Ae. annulipes vs. Ae. cantans or Ae. communis vs. Ae. punctor did not cluster separately. In addition, the three sequences available for Ae. rossicus and Aedes rusticus (Rossi) either grouped with sequences of Ae. cinereus (Ae. rossicus only) or Ae. sticticus (Ae. rossicus and Ae. rusticus).

Figure 7.

Figure 7

Maximum-likelihood phylogeny of the COI gene sequences. The tree was inferred using an HKY + G model (1000 bootstrap replicates). Branch support values of ≥ 70% are displayed in red numbers. Species groups with ambiguous clustering are highlighted in red. A list of species abbreviations is given in Table 1.

Discussion

We provided an overview of centroid size variation of the common mosquito species in Germany. As a multidirectional size, the centroid size is more sensitive to detect sample variation compared to one-dimensional measurements, e.g. wing length49. Moreover, it is an adequate indicator for the wing and body size38 and thus supply useful background information for the discrimination of certain species pairs as we could show in a pairwise comparison of the centroid size per mosquito species. However, accurate species identification solely based on wing size is not feasible50. The analysis of the superimposed shape coordinates produced by the Generalised Procrustes analysis is by far more informative for species identification51.

The results of the linear discriminant analysis based on the wing shape variables confirmed the high reliability of mosquito species identification through geometric wing morphometrics. The five most common mosquito genera in Europe (Aedes, Anopheles, Coquillettidia, Culiseta and Culex) are distinguishable by their wing shape. Our reclassification accuracy of 99% is in line with Wilke et al.18, who compared the wings of the genera Aedes, Anopheles and Culex by using the same combination of landmarks as in this study. A high reclassification accuracy was also observed on the species level, except three species pairs within the genus Aedes: Ae. annulipes vs. Ae. cantans, Ae. cinereus vs. Ae. rossicus and Ae. communis vs. Ae. punctor. Although the Mahalanobis distances of the species means derived from a canonical variate analysis clustered together in the NJ tree, an accurate differentiation of individual specimens among these three species pairs by their wings only does not seem appropriate. This is also reflected in the analysis of the COI sequences of these species. As demonstrated before, the species identification of mosquitoes using DNA barcoding of the COI gene can give ambiguous results. This in particular applies to members of the genus Aedes or Culex52,53. One explanation might be a close evolutionary relationship between the species, which is reflected in a high similarity of the wing geometry as shown for members of the genus Anopheles19,54. At least the females of these species pairs are morphological similar and difficult to distinguish by classical taxonomic features. In addition, these pairs are characterized by a similar breeding ecology and are often found in sympatry14. Further research is required for a clear distinction between these three pairs of Aedes species. This should include a multidisciplinary approach combining biological, ecological and molecular information55.

Shape and size of mosquito wings are not only species-specific. Geographically separated populations of the same species can have significant intraspecific variation in their wing morphology22,56,57. Furthermore, abiotic and biotic conditions of breeding habitats can influence the wing geometry through carry-over effects from the immature to the adult stage5861. Those factors have to be kept in mind when choosing mosquito specimens for the analyses of species-specific wing patterns. Specimens from a single sampling location would probably reduce shape variation per species, thus leading to an overestimation of the actual interspecific variation. Therefore, for each species we used specimens from at least three different sampling locations to capture a broad wing shape variance. Nevertheless, our results revealed a high reliability to distinguish mosquito species and so underpins the robustness of morphometric wing diagnosis as tool for mosquito identification, which is in line with Henry et al.62, who successfully discriminated specimens of Aedes aegypti (Linnaeus) and Aedes albopictus (Skuse) sampled from different parts of the world.

Besides natural differences between wing from mosquito specimens of the same species, morphometric analysis can be influenced by different measurement errors63. Inter-observer variation of landmark collection is likely the most important source of errors. Hence, we compared the measurement by four observers revealing a small, but considerable observer bias. In particular, when interested in finer intraspecific shape variations this might influence the results potentially leading to misinterpretations. One reason for the observer variation is probably the presence of wing scales on the veins, which can impede the precise landmark collection50. The removal of the wing scales before taking pictures may reduce observer variation and should be considered in future studies, but also increase the effort of data collection. However, completely observer unbiased measurement results are impossible. Therefore, as suggested by Dujardin et al.64, we provide the wing pictures in a way third parties can use them for own analyses including metadata on the sampling location and date of sampling (10.5061/dryad.zs7h44j5s), e.g. allowing the investigation of intraspecific wing patterns in future studies.

Our study supports the applicability of geometric wing morphometrics as a complementary technique for mosquito identification, which has certain advantages over other methods. Geometric morphometric is less expensive and time-consuming compared to genetic sequencing21,65, e.g. representing a low-cost routine alternative under semi-field conditions. In comparison with classical taxonomical identification it requires less experience, thus representing a useful tool to control own morphological identification, e.g. for inexperienced observers. Furthermore, specimens can be identified even if only one wing is preserved or if mosquitoes are stored or sampled in fluids (e.g. ethanol), which commonly result in a loss of scales relevant for accurate morphological identification of most female mosquitoes.

In conclusion, most mosquito species chosen for this study could be distinguished reliably by geometric wing morphometrics. The accuracy obtained by geometric wing morphometrics was comparable to the results of COI barcoding, but the morphometric analysis of wings is less expensive and time-consuming to implement. Hence, wing morphometrics has a high potential to complement species identification in future entomological studies or mosquito surveillance programs in Europe.

Supplementary information

Acknowledgements

We greatly acknowledge Esther Timmermann for technical assistance. This study was financially supported by the German Federal Ministry of Food and Agriculture (BMEL) with the Grant Numbers 2819105215, 2819104515 and 2819104315.

Author contributions

F.G.S., E.K., J.S.-C. and R.L. conceived and designed the study. F.G.S., L.J., L.E. A.H. and R.L. collected the data. F.G.S. and R.L. analysed the data. F.G.S., E.K. and R.L. drafted the first version of the manuscript. All authors read and approved the final manuscript.

Funding

Open Access funding enabled and organized by Projekt DEAL.

Data availability

Data for the wing pictures are stored in a repository and are available at 10.5061/dryad.zs7h44j5s.

Competing interests

The authors declare no competing interests.

Footnotes

Publisher's note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Contributor Information

F. G. Sauer, Email: felix.sauer@uol.de

R. Lühken, Email: renkeluhken@gmail.com

Supplementary information

is available for this paper at 10.1038/s41598-020-72873-z.

References

  • 1.1Harbach, R. E. Mosquito Taxonomic Inventory. https://mosquito-taxonomic-inventory.info/. Accessed 10 Aug 2020 (2013)
  • 2.Medlock JM, et al. A review of the invasive mosquitoes in Europe: Ecology, public health risks, and control options. Vector-Borne Zoonotic Dis. 2012;12:435–447. doi: 10.1089/vbz.2011.0814. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 3.Semenza JC, Suk JE. Vector-borne diseases and climate change: A European perspective. FEMS Microbiol. Lett. 2017;365:244. doi: 10.1093/femsle/fnx244. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 4.Barzon L, et al. Human cases of West Nile Virus infection in north-eastern Italy, 15 June to 15 November 2010. Eurosurveillance. 2011;16:19949. [PubMed] [Google Scholar]
  • 5.Papa A, et al. Ongoing outbreak of West Nile virus infections in humans in Greece, July–August 2010. Eurosurveillance. 2010;15:19644. doi: 10.2807/ese.15.34.19644-en. [DOI] [PubMed] [Google Scholar]
  • 6.Angelini R, et al. An outbreak of chikungunya fever in the province of Ravenna, Italy. Eurosurveillance. 2007;12:3260. doi: 10.2807/esw.12.36.03260-en. [DOI] [PubMed] [Google Scholar]
  • 7.Lühken R, et al. Distribution of Usutu virus in Germany and its effect on breeding bird populations. Emerg. Infect. Dis. 2017;23:1994–2001. doi: 10.3201/eid2312.171257. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 8.Becker N, et al. Epizootic emergence of Usutu virus in wild and captive birds in Germany. PLoS ONE. 2012;7:e32604. doi: 10.1371/journal.pone.0032604. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 9.Allering L, et al. Detection of Usutu virus infection in a healthy blood donor from south-west Germany. Eurosurveillance. 2012 doi: 10.2807/ese.17.50.20341-en. [DOI] [PubMed] [Google Scholar]
  • 10.Cadar D, et al. Blood donor screening for West Nile virus (WNV) revealed acute Usutu virus (USUV) infection, Germany, September 2016. Eurosurveillance. 2017;22:30501. doi: 10.2807/1560-7917.ES.2017.22.14.30501. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 11.Ziegler U, et al. West Nile virus epidemic in Germany triggered by epizootic emergence, 2019. Viruses. 2020;12:448. doi: 10.3390/v12040448. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 12.Börstler J, et al. Host-feeding patterns of mosquito species in Germany. Parasites Vectors. 2016;9:318. doi: 10.1186/s13071-016-1597-z. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 13.Vogels CBF, Göertz GP, Pijlman GP, Koenraadt CJM. Vector competence of European mosquitoes for West Nile virus. Emerg. Microbes Infect. 2017;6:e96. doi: 10.1038/emi.2017.82. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 14.Becker N, et al. Mosquitoes and their Control. 2. Berlin: Springer; 2010. [Google Scholar]
  • 15.Bookstein FL. Foundations of morphometrics. Annu. Rev. Ecol. Syst. 1982;13:451–470. doi: 10.1146/annurev.es.13.110182.002315. [DOI] [Google Scholar]
  • 16.Lorenz C, et al. Geometric morphometrics in mosquitoes: What has been measured? Infect. Genet. Evol. 2017;54:205–215. doi: 10.1016/j.meegid.2017.06.029. [DOI] [PubMed] [Google Scholar]
  • 17.Sanford MR, et al. Morphological differentiation may mediate mate-choice between incipient species of Anopheles gambiae ss. PLoS ONE. 2011 doi: 10.1371/journal.pone.0027920. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 18.Wilke ABB, et al. Morphometric wing characters as a tool for mosquito identification. PLoS ONE. 2016;11:e0161643. doi: 10.1371/journal.pone.0161643. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 19.Lorenz C, Marques TC, Sallum MAM, Suesdek L. Morphometrical diagnosis of the malaria vectors Anopheles cruzii, An. homunculus and An. bellator. Parasites Vectors. 2012;5:257. doi: 10.1186/1756-3305-5-257. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 20.Vidal PO, Peruzin MC, Suesdek L. Wing diagnostic characters for Culex quinquefasciatus and Culex nigripalpus (Diptera, Culicidae) Revista Brasileira de Entomologia. 2011;55:134–137. doi: 10.1590/S0085-56262011000100022. [DOI] [Google Scholar]
  • 21.Börstler J, et al. The use of morphometric wing characters to discriminate female Culex pipiens and Culex torrentium. J. Vector Ecol. 2014;39:204–212. doi: 10.1111/j.1948-7134.2014.12088.x. [DOI] [PubMed] [Google Scholar]
  • 22.Francuski L, et al. Genetic and phenotypic variation in central and northern European populations of Aedes (Aedimorphus) vexans (Meigen, 1830) (Diptera, Culicidae) J. Vector Ecol. 2016;41:160–171. doi: 10.1111/jvec.12208. [DOI] [PubMed] [Google Scholar]
  • 23.Krtinić B, Francuski L, Ludoški J, Milankov V. Integrative approach revealed contrasting pattern of spatial structuring within urban and rural biotypes of Culex pipiens. J. Appl. Entomol. 2016;140:757–774. doi: 10.1111/jen.12307. [DOI] [Google Scholar]
  • 24.Chaiphongpachara T, Laojun S. Wing morphometric variability of the malaria vector Anopheles (Cellia) epiroticus Linton et Harbach (Diptera: Culicidae) for the duration of the rainy season in coastal areas of Samut Songkhram, Thailand. Folia Parasitol. 2020;67:1–7. doi: 10.14411/fp.2020.007. [DOI] [PubMed] [Google Scholar]
  • 25.de Carvalho GC, Vendrami DP, Marrelli MT, Wilke ABB. Wing variation in Culex nigripalpus (Diptera: Culicidae) in urban parks. Parasites Vectors. 2017;10:423. doi: 10.1186/s13071-017-2348-5. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 26.Vazquez-Prokopec GM, Galvin WA, Kelly R, Kitron U. A new, cost-effective, battery-powered aspirator for adult mosquito collections. J. Med. Entomol. 2009;46:1256–1259. doi: 10.1603/033.046.0602. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 27.Mohrig W. Die Culiciden Deutschlands. Stuttgart: Gustav Fischer Verlag; 1969. [Google Scholar]
  • 28.Schindelin J, et al. Fiji: An open-source platform for biological-image analysis. Nat. Methods. 2012;9:676. doi: 10.1038/nmeth.2019. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 29.Schneider CA, Rasband WS, Eliceiri KW. NIH Image to ImageJ: 25 years of image analysis. Nat. Methods. 2012;9:671. doi: 10.1038/nmeth.2089. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 30.Louise C, Vidal PO, Suesdek L. Microevolution of Aedes aegypti. PLoS ONE. 2015;10:e0137851. doi: 10.1371/journal.pone.0137851. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 31.Bigoni L, Velemínská J, Brůžek J. Three-dimensional geometric morphometric analysis of cranio-facial sexual dimorphism in a Central European sample of known sex. HOMO-J. Compar. Hum. Biol. 2010;61:16–32. doi: 10.1016/j.jchb.2009.09.004. [DOI] [PubMed] [Google Scholar]
  • 32.Fang Y, Shi W-Q, Zhang Y. Molecular phylogeny of Anopheles hyrcanus group (Diptera: Culicidae) based on mtDNA COI. Infect. Dis. Poverty. 2017;6:61. doi: 10.1186/s40249-017-0273-7. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 33.Folmer O, Black M, Hoeh W, Lutz R, Vrijenhoek R. DNA primers for amplification of mitochondrial cytochrome c oxidase subunit I from diverse metazoan invertebrates. Mol. Mar. Biol. Biotech. 1994;3:294–299. [PubMed] [Google Scholar]
  • 34.Rudolf M, et al. First nationwide surveillance of Culex pipiens complex and Culex torrentium mosquitoes demonstrated the presence of Culex pipiens biotype pipiens/molestus hybrids in Germany. PLoS ONE. 2013;8:e71832. doi: 10.1371/journal.pone.0071832. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 35.Lühken R, et al. Distribution of individual members of the mosquito Anopheles maculipennis complex in Germany identified by newly developed real-time PCR assays. Med. Vet. Entomol. 2016;30:144–154. doi: 10.1111/mve.12161. [DOI] [PubMed] [Google Scholar]
  • 36.Adams, D. C., Collyer, M., Kaliontzopoulou, A. & Sherratt, E. Geomorph: Software for Geometric Morphometric Analyses. R package version 3.0.6. (2018).
  • 37.Bookstein FL. Morphometric Tools for Landmark Data: Geometry and Biology. Cambridge: Cambridge University Press; 1997. [Google Scholar]
  • 38.Vargas REM, Ya-umphan P, Phumala-Morales N, Komalamisra N, Dujardin J-P. Climate associated size and shape changes in Aedes aegypti (Diptera: Culicidae) populations from Thailand. Infect. Genet. Evol. 2010;10:580–585. doi: 10.1016/j.meegid.2010.01.004. [DOI] [PubMed] [Google Scholar]
  • 39.Rohlf FJ, Slice D. Extensions of the Procrustes method for the optimal superimposition of landmarks. Syst. Biol. 1990;39:40–59. [Google Scholar]
  • 40.Venables WN, Ripley BD. Modern Applied Statistics with S. 4. New York: Springer; 2002. [Google Scholar]
  • 41.41Schlager, S. Morpho and Rvcg–Shape Analysis in R: R-Packages for geometric morphometrics, shape analysis and surface manipulations. In Statistical Shape and Deformation Analysis 217–256 (Elsevier, Amsterdam, 2017).
  • 42.Paradis E, Schliep K. ape 5.0: An environment for modern phylogenetics and evolutionary analyses in R. Bioinformatics. 2019;35:526–528. doi: 10.1093/bioinformatics/bty633. [DOI] [PubMed] [Google Scholar]
  • 43.Watanabe A. How many landmarks are enough to characterize shape and size variation? PLoS ONE. 2018;13:e0198341. doi: 10.1371/journal.pone.0198341. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 44.Wickham H. ggplot2: Elegant Graphics for Data Analysis. New York: Springer; 2016. [Google Scholar]
  • 45.R: A Language and Environment for Statistical Computing (Vienna, Austria, 2018).
  • 46.Charif, D. & Lobry, J. R. SeqinR 1.0–2: A contributed package to the R project for statistical computing devoted to biological sequences retrieval and analysis. In Structural Approaches to Sequence Evolution 207–232 (Springer, Berlin, 2007).
  • 47.Schliep KP. phangorn: Phylogenetic analysis in R. Bioinformatics. 2011;27:592–593. doi: 10.1093/bioinformatics/btq706. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 48.Schliep K, Potts A, Morrison D, Grimm G. Intertwining phylogenetic trees and networks. Methods Ecol. Evol. 2017;8:1212–1220. doi: 10.1111/2041-210X.12760. [DOI] [Google Scholar]
  • 49.Dujardin J-P. Morphometrics applied to medical entomology. Infect. Genet. Evol. 2008;8:875–890. doi: 10.1016/j.meegid.2008.07.011. [DOI] [PubMed] [Google Scholar]
  • 50.Jaramillo ON, Dujardin JP, Calle-Londoño D, Fonseca-González I. Geometric morphometrics for the taxonomy of 11 species of Anopheles (Nyssorhynchus) mosquitoes. Med. Vet. Entomol. 2015;29:26–36. doi: 10.1111/mve.12091. [DOI] [PubMed] [Google Scholar]
  • 51.Klingenberg CP. Evolution and development of shape: Integrating quantitative approaches. Nat. Rev. Genet. 2010;11:623. doi: 10.1038/nrg2829. [DOI] [PubMed] [Google Scholar]
  • 52.Versteirt V, et al. Identification of Belgian mosquito species (Diptera: Culicidae) by DNA barcoding. Mol. Ecol. Resour. 2015;15:449–457. doi: 10.1111/1755-0998.12318. [DOI] [PubMed] [Google Scholar]
  • 53.Batovska J, Blacket MJ, Brown K, Lynch SE. Molecular identification of mosquitoes (Diptera: Culicidae) in southeastern Australia. Ecol. Evol. 2016;6:3001–3011. doi: 10.1002/ece3.2095. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 54.Chaiphongpachara T, et al. Geometric morphometrics approach towards discrimination of three member species of Maculatus group in Thailand. Acta Trop. 2019 doi: 10.1016/j.actatropica.2019.01.024. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 55.Schlick-Steiner BC, et al. Integrative taxonomy: A multisource approach to exploring biodiversity. Annu. Rev. Entomol. 2010;55:421–438. doi: 10.1146/annurev-ento-112408-085432. [DOI] [PubMed] [Google Scholar]
  • 56.Petersen V, Devicari M, Suesdek L. High morphological and genetic variabilities of Ochlerotatus scapularis, a potential vector of filarias and arboviruses. Parasites Vectors. 2015;8:128. doi: 10.1186/s13071-015-0740-6. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 57.Carvajal TM, et al. Spatial analysis of wing geometry in dengue vector mosquito, Aedes aegypti (L.) (Diptera: Culicidae), populations in Metropolitan Manila, Philippines. J. Vector Borne Dis. 2016;53:127. [PubMed] [Google Scholar]
  • 58.Jirakanjanakit N, et al. Influence of larval density or food variation on the geometry of the wing of Aedes (Stegomyia) aegypti. Trop. Med. Int. Health. 2007;12:1354–1360. doi: 10.1111/j.1365-3156.2007.01919.x. [DOI] [PubMed] [Google Scholar]
  • 59.Evans MV, et al. Carry-over effects of urban larval environments on the transmission potential of dengue-2 virus. Parasites Vectors. 2018;11:426. doi: 10.1186/s13071-018-3013-3. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 60.Roux O, et al. Evidence for carry-over effects of predator exposure on pathogen transmission potential. Proc. R. Soc. B Biol. Sci. 2015;282:20152430. doi: 10.1098/rspb.2015.2430. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 61.Phanitchat T, et al. Geometric morphometric analysis of the effect of temperature on wing size and shape in Aedes albopictus. Med. Vet. Entomol. 2019;33:476–484. doi: 10.1111/mve.12385. [DOI] [PubMed] [Google Scholar]
  • 62.Henry A, Thongsripong P, Fonseca-Gonzalez I, Jaramillo-Ocampo N, Dujardin J-P. Wing shape of dengue vectors from around the world. Infect. Genet. Evol. 2010;10:207–214. doi: 10.1016/j.meegid.2009.12.001. [DOI] [PubMed] [Google Scholar]
  • 63.Arnqvist G, Martensson T. Measurement error in geometric morphometrics: Empirical strategies to assess and reduce its impact on measures of shape. Acta Zoologica Academiae Scientiarum Hungaricae. 1998;44:73–96. [Google Scholar]
  • 64.Dujardin J-PA, Kaba D, Henry AB. The exchangeability of shape. BMC Res. Notes. 2010;3:266. doi: 10.1186/1756-0500-3-266. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 65.Lorenz C, Patané JS, Suesdek L. Morphogenetic characterisation, date of divergence, and evolutionary relationships of malaria vectors Anopheles cruzii and Anopheles homunculus. Infect. Genet. Evol. 2015;35:144–152. doi: 10.1016/j.meegid.2015.08.011. [DOI] [PubMed] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

Data Availability Statement

Data for the wing pictures are stored in a repository and are available at 10.5061/dryad.zs7h44j5s.


Articles from Scientific Reports are provided here courtesy of Nature Publishing Group

RESOURCES