Abstract
In this paper, the semi-average method under neutrosophic statistics is introduced. The trend regression line for the semi-average method is given in the presence of Neutrosophy in the data. The application of the semi-average method under indeterminacy is given with the help of wind speed data. The efficiency of the semi-average method under the neutrosophic statistics is discussed over the semi-average method under classical statistics. From the analysis, it is concluded that the proposed method is effective, informative, and flexible for the forecasting of wind speed.
Subject terms: Climate sciences, Environmental sciences, Mathematics and computing
Introduction
In business situations, the experimenters are interested to estimate the future’s estimated sales, prices of the commodity, and energy produced through winds. This estimation is done on the basis of information on past data. Data that is collected in accordance with the time is known as the time-series data. For example, the minimum and maximum values of wind speed recorded on a daily basis. There are four popular methods to measure the secular trends in the time series data. The method of semi-averages is very popular due to its simplicity, easy to apply, relatively objective, and easy to understand as compared to the method of least square and method of moving averages. In this method, a time series data is divided into two halves. The average of each half is computed and a coded variable is generated corresponding to each average. A regression line is used to forecast the values for the future1. Discussed the application of time series in organizational research2,3 presented methods of the time series analysis4. Applied the time series method in geography5. Worked on the time series method using the local Wilcoxon statistic.
The statistical methods have been widely for estimation and forecasting of energy trough wind6. Applied the statistical analysis on the wind speed data7. Worked on the distribution for the wind speed8. Worked on the estimation of wind speed using the time series method9–11. Introduced various distribution to model the wind speed. The estimation of parameters of wind data was studied by12. The application of statistical analysis can be seen in13. More applications of statistical methods in the field of energy can be seen in14–22.
The existing statistical methods are applied for the estimation of wind energy when the parameters or the data is determined or exact. In practice, usually, the wind speed data is recorded in the interval; therefore, the existing methods under classical statistics (CS) cannot be used for estimation and forecasting of wind speed data. In this case, the methods using the fuzzy logic are applied for estimation and forecasting of the energy23. Introduced time series methods using fuzzy logic24–26. Introduced an analysis method using the fuzzy logic27. Presented a detailed review of time-series application in deep learning28,29 also discussed the applications of the fuzzy logic30 argued that the neutrosophic logic is more informative than the fuzzy logic. The neutrosophic logic which is a generalization of fuzzy logic gives information about the measure of indeterminacy31–33. Provided several applications of the neutrosophic logic in the various fields34–36. Proved the efficiency of neutrosophic statistical analysis over CS. The neutrosophic statistics (NS) reduces to CS when no uncertainty is found in the data. Some statistical tests using NS was introduced by37,38.
Although a rich literature is available on time series methods under CS. According to the best of our knowledge, no work on semi-average method under neutrosophic statistics is developed. To fill this gap, in this paper, we will present the semi-average method in the presence of indeterminacy in the data. The application of the proposed method will be given using wind speed data. The necessary measures to estimate/forecast the wind speed will be introduced. It is expected that the proposed method will be quite effective to forecast the wind speed. The proposed method will help the energy experts to estimate the energy on the basis of energy when neutrosophic numbers are present in the data.
Preliminaries
Suppose that , ,…, be a neutrosophic time series random variable of size with the measure of indeterminacy . The values ,,…, represents the time series values under CS. Let and are the codes values corresponding to neutrosophic averages of the first and second halves. The neutrosophic average for the first half is computed as.
Step-1: Compute the means of lower values of the first half of time-series data
Step-2: Compute the means of upper values of the first half of time-series data
Step-3: The neutrosophic averages for the first and second are given by
where and are the neutrosophic averages of the first and the second halves.
Semi-average method under indeterminacy
In the method of semi-average under indeterminacy, the time series data having neutrosophic numbers is divided into two equal or nearly equal halves. The neutrosophic average of each half is computed and placed them at the center of time spans. Suppose that and be the neutrosophic averages of the first and the second half, respectively. Suppose also that and are the coded values corresponding to the first and second half, respectively. The neutrosophic trends values using this method can be obtained as follows
| 1 |
Note here that Eq. (1) is used to estimate the following regression line under indeterminacy
| 2 |
where is neutrosophic intercept which can be calculated as follows
| 3 |
where is the rate of change per unit in the presence of indeterminacy and computed as follows
| 4 |
Application using wind speed data
The application of the proposed semi-average method under indeterminacy is given using real wind speed data. The data of the year 2020 is collected from the Pakistan Meteorology department. The last available data of the first three months have been used to explain the proposed method. The wind speed (mph) data having the minimum value and the maximum value is taken. The energy expert is interested to forecast the wind speed on the basis of the given data. As the wind speed (mph) data is recorded in the interval, therefore, the use of the existing semi-average method under CS is not suitable. The proposed semi-average method under indeterminacy is suitable to apply for such wind speed data. The necessary calculations for the wind speed data of month January, February, and March 2020 using the proposed method are explained.
The fitted neutrosophic regression equation for January 2020 is given by
The fitted neutrosophic regression equation for February 2020 is given by
The fitted neutrosophic regression equation for March 2020 is given by
The actual wind speed (mph) and the trended values for January, February, and March 2020 are plotted and shown in Fig. 1. The left figure shows the values of the trend of January, the middle figure shows the values of February month and the right figure shows the trended values of March. From Fig. 1, it can be noted that there is a big gap between the actual wind speed data and the fitted data. The larger width of the indeterminacy interval clear affects the forecasting of the wind speed. In the month of January, only three trended points are near the line of actual values. The middle figure shows that still, several points are above the line of actual values. In the month of March, there is an irregular trend in wind speed. From Fig. 1, we also note that for the month of January, several plotted points are close to the trend line. Therefore, the trend line for this month can be used to forecast the wind speed. From Fig. 1, it can be noted that the presence of Neutrosophy in the wind speed data can affect the forecasting analysis of the wind speed. The proposed method has some limitations that it can be applied for the forecasting of the wind speed only when the data has Neutrosophy. The proposed method can be applied for a variety of fields where the forecasting is needed using the data under indeterminate environment.
Figure 1.
The trend lines and actual observations for January, February and March 2020. Figure 1 is generated using R version 3.2.1 (https://www.r-project.org/).
Competitive study based on wind speed data
As discussed earlier, the proposed semi-average method under indeterminacy is the generalization of the existing semi-average method under CS. The proposed method reduces to existing method when . We will compare both methods in terms of trended values for the three months of the year 2020. The neutrosophic form of trended values and measure of indeterminacy of January 2020 is given in Table 1. The neutrosophic form of trended values and measure of indeterminacy of February 2020 is given in Table 2. The neutrosophic form of trended values and measure of indeterminacy of March 2020 is given in Table 3. From Table 1, it is quite clear that the measure of indeterminacy is 1. Further, the determined part of the neutrosophic form is 0. It means that the presence of a high measure of indeterminacy will affect the forecasting of wind energy. From Table 2, it can be seen that the indeterminacy measure for the first three days is around 1. For the last four days, this measure is 0.96. For example, for day seven, the neutrosophic form of trended value is ; The trended value 0.1228 presents the value under CS. From this neutrosophic form, it can be seen that for seven days, the forecasting value of wind energy will be from 0.1228 to 10.38. We note a big gap between these values, the gap between these values is based on the difference between the lower and upper values of wind speed. The gap may be narrow if lower and upper values of wind speed are close. From this study, it can be noted that the existing method provided only the exact/determined forecasting value for wind speed. On the other hand, the proposed method provides the forecasting values in an interval. In addition, the proposed method gives information about the measure of indeterminacy. In an uncertain environment, the use of the existing method under CS will mislead the energy experts. The use of the proposed method to forecast the wind speed in the presence of indeterminacy is quite suitable and effective.
Table 1.
Neutrosophic form of wind speed in January.
| January | Wind speed (mph) | Trend values | Neutrosophic form | Indeterminacy | ||
|---|---|---|---|---|---|---|
| 1 | 0 | 6 | 0 | 5.85 | ||
| 2 | 0 | 7 | 0 | 6.28 | ||
| 3 | 0 | 6 | 0 | 6.71 | ||
| 4 | 0 | 3 | 0 | 7.14 | ||
| 5 | 0 | 7 | 0 | 7.57 | ||
| 6 | 0 | 12 | 0 | 8 | ||
| 7 | 0 | 7 | 0 | 8.43 | ||
| 8 | 0 | 7 | 0 | 8.86 | ||
| 9 | 0 | 8 | 0 | 9.29 | ||
| 10 | 0 | 12 | 0 | 9.72 | ||
| 11 | 0 | 9 | 0 | 10.15 | ||
| 12 | 0 | 14 | 0 | 10.58 | ||
| 13 | 0 | 21 | 0 | 11.01 | ||
| 14 | 0 | 8 | 0 | 11.44 | ||
| 15 | 0 | 6 | 0 | 11.87 | ||
| 16 | 0 | 9 | 0 | 12.3 | ||
| 17 | 0 | 5 | 0 | 12.73 | ||
| 18 | 0 | 6 | 0 | 13.16 | ||
| 19 | 0 | 10 | 0 | 13.59 | ||
| 20 | 0 | 9 | 0 | 14.02 | ||
| 21 | 0 | 10 | 0 | 14.45 | ||
| 22 | 0 | 100 | 0 | 14.88 | ||
| 23 | 0 | 15 | 0 | 15.31 | ||
| 24 | 0 | 12 | 0 | 15.74 | ||
| 25 | 0 | 9 | 0 | 16.17 | ||
| 26 | 0 | 12 | 0 | 16.6 | ||
| 27 | 0 | 12 | 0 | 17.03 | ||
| 28 | 0 | 9 | 0 | 17.46 | ||
| 29 | 0 | 9 | 0 | 17.89 | ||
| 30 | 0 | 9 | 0 | 18.32 | ||
| 31 | 0 | 8 | 0 | 18.75 | ||
Table 2.
Neutrosophic form of wind speed in February.
| February | Wind speed (mph) | Trend values | Neutrosophic form | Indeterminacy | ||
|---|---|---|---|---|---|---|
| 1 | 0 | 5 | 0.0028 | 9.24 | ||
| 2 | 0 | 7 | 0.0228 | 9.43 | ||
| 3 | 0 | 6 | 0.0428 | 9.62 | ||
| 4 | 0 | 14 | 0.0628 | 9.81 | ||
| 5 | 0 | 9 | 0.0828 | 10 | ||
| 6 | 0 | 8 | 0.1028 | 10.19 | ||
| 7 | 0 | 6 | 0.1228 | 10.38 | ||
| 8 | 0 | 12 | 0.1428 | 10.57 | ||
| 9 | 0 | 12 | 0.1628 | 10.76 | ||
| 10 | 0 | 12 | 0.1828 | 10.95 | ||
| 11 | 0 | 7 | 0.2028 | 11.14 | ||
| 12 | 0 | 14 | 0.2228 | 11.33 | ||
| 13 | 0 | 15 | 0.2428 | 11.52 | ||
| 14 | 2 | 21 | 0.2628 | 11.71 | ||
| 15 | 0 | 15 | 0.2828 | 11.9 | ||
| 16 | 0 | 12 | 0.3028 | 12.09 | ||
| 17 | 0 | 12 | 0.3228 | 12.28 | ||
| 18 | 0 | 9 | 0.3428 | 12.47 | ||
| 19 | 3 | 23 | 0.3628 | 12.66 | ||
| 20 | 0 | 21 | 0.3828 | 12.85 | ||
| 21 | 0 | 15 | 0.4028 | 13.04 | ||
| 22 | 0 | 7 | 0.4228 | 13.23 | ||
| 23 | 0 | 7 | 0.4428 | 13.42 | ||
| 24 | 0 | 12 | 0.4628 | 13.61 | ||
| 25 | 0 | 12 | 0.4828 | 13.8 | ||
| 26 | 0 | 9 | 0.5028 | 13.99 | ||
| 27 | 0 | 9 | 0.5228 | 14.18 | ||
| 28 | 0 | 16 | 0.5428 | 14.37 | ||
| 29 | 3 | 21 | 0.5628 | 14.56 | ||
Table 3.
Neutrosophic form of wind speed in March.
| March | Wind speed (mph) | Trend values | Neutrosophic form | Indeterminacy | ||
|---|---|---|---|---|---|---|
| 1 | 0 | 12 | 0 | 17.36 | ||
| 2 | 0 | 6 | 0 | 17.07 | ||
| 3 | 0 | 6 | 0 | 16.78 | ||
| 4 | 0 | 12 | 0 | 16.49 | ||
| 5 | 3 | 25 | 0 | 16.2 | ||
| 6 | 2 | 25 | 0 | 15.91 | ||
| 7 | 0 | 13 | 0.53 | 15.62 | ||
| 8 | 0 | 10 | 1.4 | 15.33 | ||
| 9 | 5 | 15 | 2.27 | 15.04 | ||
| 10 | 0 | 12 | 3.14 | 14.75 | ||
| 11 | 0 | 13 | 4.01 | 14.46 | ||
| 12 | 3 | 37 | 4.88 | 14.17 | ||
| 13 | 5 | 23 | 5.75 | 13.88 | ||
| 14 | 3 | 14 | 6.62 | 13.59 | ||
| 15 | 0 | 7 | 7.49 | 13.3 | ||
| 16 | 0 | 12 | 8.36 | 13.01 | ||
| 17 | 0 | 7 | 9.23 | 12.72 | ||
| 18 | 0 | 9 | 10.1 | 12.43 | ||
| 19 | 0 | 8 | 10.97 | 12.14 | ||
| 20 | 0 | 7 | 11.84 | 11.85 | ||
| 21 | 0 | 16 | 12.71 | 11.56 | ||
| 22 | 0 | 8 | 13.58 | 11.27 | ||
| 23 | 0 | 6 | 14.45 | 10.98 | ||
| 24 | 0 | 7 | 15.32 | 10.69 | ||
| 25 | 0 | 21 | 16.19 | 10.4 | ||
| 26 | 0 | 12 | 17.06 | 10.11 | ||
| 27 | 0 | 17 | 17.93 | 9.82 | ||
| 28 | 3 | 10 | 18.8 | 9.53 | ||
| 29 | 3 | 7 | 19.67 | 9.24 | ||
| 30 | 0 | 12 | 20.54 | 8.95 | ||
| 31 | 0 | 14 | 21.41 | 8.66 | ||
Conclusions
The semi-average method under neutrosophic was introduced in this paper. The proposed semi-average method is the extension of the semi-average method under classical statistics. The trend line under the indeterminacy was introduced. The proposed semi-average method can be applied effectively when the Neutrosophy is presented in the data. The application of the proposed method was given with the help of wind speed data. From the analysis, it can be concluded that the proposed method provides the forecasting wind speed values in intervals rather than the exact values. Therefore, the proposed method is quite reasonable to use when the data has imprecise and indeterminate observations. The other time series methods can be developed under neutrosophic statistics as future research. More statistical tests about the time series data under neutrosophic statistics can be studied as future research.
Acknowledgements
The author is deeply thankful to the editor and the reviewers for their valuable suggestions to improve the quality of this manuscript. We are also very thankful Dr. Nasrullah Khan (UVAS, Lahore Pakistan) for his valuable suggestions. This work was funded by the Deanship of Scientific Research (DSR), King Abdulaziz University, Jeddah. The author, therefore, gratefully acknowledge the DSR technical and financial support.
Author contributions
Design and conduct of the study (M.A.); collection of data (M.A); management, analysis, and interpretation of data (M.A.).
Competing interests
The author declares no competing interests.
Footnotes
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
This article has been retracted. Please see the retraction notice for more detail: https://doi.org/10.1038/s41598-022-15748-9"
Change history
7/4/2022
This article has been retracted. Please see the Retraction Notice for more detail: 10.1038/s41598-022-15748-9
References
- 1.Jebb AT, Tay L. Introduction to time series analysis for organizational research: methods for longitudinal analyses. Organ. Res. Methods. 2017;20:61–94. doi: 10.1177/1094428116668035. [DOI] [Google Scholar]
- 2.Chatfield, C. & Xing, H. The Analysis of Time Series: An Introduction with R. (CRC Press, Boca Raton, 2019).
- 3.McDowall D, McCleary R, Bartos BJ. Interrupted Time Series Analysis. Oxford: Oxford University Press; 2019. [Google Scholar]
- 4.Feyrer J. Trade and income—Exploiting time series in geography. Am. Econ. J.: Appl. Econ. 2019;11:1–35. [Google Scholar]
- 5.Kosiorowski D, Rydlewski JP, Snarska M. Detecting a structural change in functional time series using local Wilcoxon statistic. Stat. Pap. 2019;60:1677–1698. doi: 10.1007/s00362-017-0891-y. [DOI] [Google Scholar]
- 6.Akpinar EK, Akpinar S. A statistical analysis of wind speed data used in installation of wind energy conversion systems. Energy Convers. Manag. 2005;46:515–532. doi: 10.1016/j.enconman.2004.05.002. [DOI] [Google Scholar]
- 7.Brano VL, Orioli A, Ciulla G, Culotta S. Quality of wind speed fitting distributions for the urban area of Palermo, Italy. Renew. Energy. 2011;36:1026–1039. doi: 10.1016/j.renene.2010.09.009. [DOI] [Google Scholar]
- 8.Liu J, Ren G, Wan J, Guo Y, Yu D. Variogram time-series analysis of wind speed. Renew. Energy. 2016;99:483–491. doi: 10.1016/j.renene.2016.07.013. [DOI] [Google Scholar]
- 9.Ali S, Lee S-M, Jang C-M. Statistical analysis of wind characteristics using Weibull and Rayleigh distributions in Deokjeok-do Island-Incheon, South Korea. Renew. Energy. 2018;123:652–663. doi: 10.1016/j.renene.2018.02.087. [DOI] [Google Scholar]
- 10.Bidaoui H, El Abbassi I, El Bouardi A, Darcherif A. Wind speed data analysis using Weibull and Rayleigh distribution functions, case study: five cities Northern Morocco. Procedia Manuf. 2019;32:786–793. doi: 10.1016/j.promfg.2019.02.286. [DOI] [Google Scholar]
- 11.ul Haq, M. A., Rao, G. S., Albassam, M. & Aslam, M. Marshall–Olkin Power Lomax distribution for modeling of wind speed data. Energy Rep.6, 1118–1123 (2020).
- 12.Alrashidi M, Rahman S, Pipattanasomporn M. Metaheuristic optimization algorithms to estimate statistical distribution parameters for characterizing wind speeds. Renew. Energy. 2020;149:664–681. doi: 10.1016/j.renene.2019.12.048. [DOI] [Google Scholar]
- 13.Campisi-Pinto S, Gianchandani K, Ashkenazy Y. Statistical tests for the distribution of surface wind and current speeds across the globe. Renew. Energy. 2020;149:861–876. doi: 10.1016/j.renene.2019.12.041. [DOI] [Google Scholar]
- 14.Ozay C, Celiktas MS. Statistical analysis of wind speed using two-parameter Weibull distribution in Alaçatı region. Energy Convers. Manag. 2016;121:49–54. doi: 10.1016/j.enconman.2016.05.026. [DOI] [Google Scholar]
- 15.Katinas V, Gecevicius G, Marciukaitis M. An investigation of wind power density distribution at location with low and high wind speeds using statistical model. Appl. Energy. 2018;218:442–451. doi: 10.1016/j.apenergy.2018.02.163. [DOI] [Google Scholar]
- 16.Chelton D. Ocean–atmosphere coupling: Mesoscale eddy effects. Nat. Geosci. 2013;6:594–595. doi: 10.1038/ngeo1906. [DOI] [Google Scholar]
- 17.Shi R, et al. Ship observations and numerical simulation of the marine atmospheric boundary layer over the spring oceanic front in the northwestern South China Sea. J. Geophys. Res.: Atmos. 2017;122:3733–3753. doi: 10.1002/2016JD026071. [DOI] [Google Scholar]
- 18.Qing X. Statistical analysis of wind energy characteristics in Santiago island, Cape Verde. Renew. Energy. 2018;115:448–461. doi: 10.1016/j.renene.2017.08.077. [DOI] [Google Scholar]
- 19.Wang S, Zhang Y, Waring M, Lo LJ. Statistical analysis of wind data using Weibull distribution for natural ventilation estimation. Sci. Technol. Built Environ. 2018;24:922–932. doi: 10.1080/23744731.2018.1432936. [DOI] [Google Scholar]
- 20.Mahmood FH, Resen AK, Khamees AB. Wind characteristic analysis based on Weibull distribution of Al-Salman site. Energy Reports: Iraq; 2019. [Google Scholar]
- 21.Akgül, F. G. & Şenoğlu, B. Comparison of wind speed distributions: a case study for Aegean coast of Turkey, in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1–18 (2019).
- 22.Zaman B, Lee MH, Riaz M. An improved process monitoring by mixed multivariate memory control charts: An application in wind turbine field. Comput. Ind. Eng. 2020;142:106343. doi: 10.1016/j.cie.2020.106343. [DOI] [Google Scholar]
- 23.Song, Q. & Chissom, B. S. Fuzzy time series and its models. Fuzzy Sets Syst.54, 269–277 (1993).
- 24.Grzegorzewski, P. Testing statistical hypotheses with vague data. Fuzzy Sets Syst.112, 501–510 (2000).
- 25.Grzegorzewski P. k-sample median test for vague data. Int. J. Intell. Syst. 2009;24:529–539. doi: 10.1002/int.20345. [DOI] [Google Scholar]
- 26.Grzegorzewski P, Śpiewak M. The sign test and the signed-rank test for interval-valued data. Int. J. Intell. Syst. 2019;34:2122–2150. doi: 10.1002/int.22134. [DOI] [Google Scholar]
- 27.Sezer OB, Gudelek MU, Ozbayoglu AM. Financial time series forecasting with deep learning: a systematic literature review: 2005–2019. Appl. Soft Comput. 2020;90:106181. doi: 10.1016/j.asoc.2020.106181. [DOI] [Google Scholar]
- 28.Montenegro, M., Casals, M. a. R., Lubiano, M. a. A. & Gil, M. a. A. Two-sample hypothesis tests of means of a fuzzy random variable. Inf. Sci.133, 89–100 (2001).
- 29.von Storch H, Zwiers F. Testing ensembles of climate change scenarios for “statistical significance”. Clim. Change. 2013;117:1–9. doi: 10.1007/s10584-012-0551-0. [DOI] [Google Scholar]
- 30.Smarandache, F. Neutrosophy. Neutrosophic probability, set, and logic, proquest information & learning. Ann Arbor, Michigan, USA105, 118–123 (1998).
- 31.Abdel-Basset, M., Nabeeh, N. A., El-Ghareeb, H. A. & Aboelfetouh, A. Utilising neutrosophic theory to solve transition difficulties of IoT-based enterprises. Enterprise Inf. Syst., 1–21 (2019).
- 32.Smarandache, F. Neutrosophic set is a generalization of intuitionistic fuzzy set, inconsistent intuitionistic fuzzy set (picture fuzzy set, ternary fuzzy set), pythagorean fuzzy set, spherical fuzzy set, and q-rung orthopair fuzzy set, while neutrosophication is a generalization of regret theory, grey system theory, and three-ways decision (revisited). J. New Theory, 1–31 (2019).
- 33.Nabeeh NA, Smarandache F, Abdel-Basset M, El-Ghareeb HA, Aboelfetouh A. An integrated neutrosophic-topsis approach and its application to personnel selection: A new trend in brain processing and analysis. IEEE Access. 2019;7:29734–29744. doi: 10.1109/ACCESS.2019.2899841. [DOI] [Google Scholar]
- 34.Smarandache, F. Introduction to Neutrosophic Statistics. (Infinite Study, 2014).
- 35.Chen J, Ye J, Du S. Scale effect and anisotropy analyzed for neutrosophic numbers of rock joint roughness coefficient based on neutrosophic statistics. Symmetry. 2017;9:208. doi: 10.3390/sym9100208. [DOI] [Google Scholar]
- 36.Chen J, Ye J, Du S, Yong R. Expressions of rock joint roughness coefficient using neutrosophic interval statistical numbers. Symmetry. 2017;9:123. doi: 10.3390/sym9070123. [DOI] [Google Scholar]
- 37.Aslam M. Design of the Bartlett and Hartley tests for homogeneity of variances under indeterminacy environment. J. Taibah Univ. Sci. 2020;14:6–10. doi: 10.1080/16583655.2019.1700675. [DOI] [Google Scholar]
- 38.Aslam, M. On detecting outliers in complex data using Dixon’s test under neutrosophic statistics. J. King Saud Univ.-Sci. (2020).

