Skip to main content
Materials logoLink to Materials
. 2020 Nov 24;13(23):5322. doi: 10.3390/ma13235322

Correction: Lara-Banda, M., et al. Alternative to Nitric Acid Passivation of 15-5 and 17-4PH Stainless Steel Using Electrochemical Techniques. Materials 2020, 13, 2836

María Lara-Banda 1, Citlalli Gaona-Tiburcio 1, Patricia Zambrano-Robledo 1, Marisol Delgado-E 1, José A Cabral-Miramontes 1, Demetrio Nieves-Mendoza 2, Erick Maldonado-Bandala 2, Francisco Estupiñan-López 1, José G Chacón-Nava 3, Facundo Almeraya-Calderón 1,*
PMCID: PMC7727800  PMID: 33255514

The author wishes to make the following correction to this paper [1]. Due to mislabeling, replace:

Table 3.

Electrochemical noise parameters at various conditions in 5 wt. % NaCl at 49 °C.

Passivated Agent Stainless Steel
Inoxidable
Time (min) Rn (Ω/cm2) icorr (mA/cm2) LI Corrosion Type
Citric acid 15-5PH 60 8.01 × 104 6.49 × 104 0.0862 Mixed
90 5.00 × 105 1.04 × 104 0.0308 Mixed
17-4PH 60 5.76 × 104 4.51 × 104 0.2492 Localized
90 3.27 × 105 1.59 × 104 0.0900 Mixed
Nitric acid 15-5PH 60 2.35 × 106 1.1 × 105 0.1871 Localized
90 1.51 × 106 1.72 × 105 0.1077 Localized
17-4PH 60 1.03 × 106 2.52 × 105 0.1485 Localized
90 1.34 × 106 1.94 × 104 0.1727 Localized

Table 4.

Potentiodynamic polarization parameters in stainless steels passivated at 49 °C, in 5 wt. % NaCl.

Passivated Agent Stainless Steel Time (min) Ecorr (mV) Epit (mV) icorr (mA/cm2) C. R. (mm/year)
Citric Acid 15-5PH 60 −323 42 5.26 × 105 5.54 × 107
90 −266 147 4.50 × 105 4.75 × 107
17-4PH 60 −335 91 9.22 × 105 9.64 × 107
90 −360 97 5.38 × 105 5.63 × 107
Nitric Acid 15-5PH 60 −228 467 2.16 × 105 2.28 × 107
90 −228 765 2.27 × 105 2.39 × 107
17-4PH 60 −271 439 3.51 × 105 3.67 × 107
90 −279 323 4.41 × 105 4.61 × 107

with

Table 3.

Electrochemical noise parameters at various conditions in 5 wt. % NaCl at 49 °C.

Passivated Agent Stainless Steel Time (min) Rn (Ω/cm2) icorr (mA/cm2) LI Corrosion Type
Citric acid 15-5PH 60 8.01 × 10−4 6.49 × 10−4 0.0862 Mixed
90 5.00 × 10−5 1.04 × 10−4 0.0308 Mixed
17-4PH 60 5.76 × 10−4 4.51 × 10−4 0.2492 Localized
90 3.27 × 10−5 1.59 × 10−4 0.0900 Mixed
Nitric acid 15-5PH 60 2.35 × 10−6 1.1 × 10−5 0.1871 Localized
90 1.51 × 10−6 1.72 × 10−5 0.1077 Localized
17-4PH 60 1.03 × 10−6 2.52 × 10−5 0.1485 Localized
90 1.34 × 10−6 1.94 × 10−4 0.1727 Localized

Table 4.

Potentiodynamic polarization parameters in stainless steels passivated at 49 °C, in 5 wt. % NaCl.

Passivated Agent Stainless Steel Time (min) Ecorr (mV) Epit (mV) icorr (mA/cm2) C. R. (mm/year)
Citric Acid 15-5PH 60 −323 42 5.26 × 10−5 5.54 × 10−7
90 −266 147 4.50 × 10−5 4.75 × 10−7
17-4PH 60 −335 91 9.22 × 10−5 9.64 × 10−7
90 −360 97 5.38 × 10−5 5.63 × 10−7
Nitric Acid 15-5PH 60 −228 467 2.16 × 10−5 2.28 × 10−7
90 −228 765 2.27 × 10−5 2.39 × 10−7
17-4PH 60 −271 439 3.51 × 10−5 3.67 × 10−7
90 −279 323 4.41 × 10−5 4.61 × 10−7

The authors would like to apologize for any inconvenience caused to the readers by these changes.

Footnotes

Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Reference

  • 1.Lara-Banda M., Gaona-Tiburcio C., Zambrano-Robledo P., Delgado-E M., Cabral-Miramontes J., Nieves-Mendoza D., Maldonado-Bandala E., Estupiñan-López F., Chacón-Nava J., Almeraya-Calderón F. Alternative to Nitric Acid Passivation of 15-5 and 17-4PH Stainless Steel Using Electrochemical Techniques. Materials. 2020;13:2836. doi: 10.3390/ma13122836. [DOI] [PMC free article] [PubMed] [Google Scholar]

Articles from Materials are provided here courtesy of Multidisciplinary Digital Publishing Institute (MDPI)

RESOURCES