Abstract
Unsymmetrical tetradentate Schiff base Fe(III) and Cu(II) complexes were prepared by the coordination of some unsymmetrical tetradentate Schiff base ligands with CuCl2·2H2O or FeCl3·6H2O. The obtained complexes were characterized by ESI-MS, IR, and UV-Vis. The spectroscopic data with typical signals are in agreement with the suggested molecular formulae of the complexes. Their cyclic voltammetric studies in acetonitrile solutions showed that the Cu(II)/Cu(I) and Fe(III)/Fe(II) reduction processes are at (−)1.882–(−) 1.782 V and at (−) 1.317–(−) 1.164 V, respectively. The in vitro cytotoxicity of obtained complexes was screened for KB and Hep-G2 human cancer cell lines. The results showed that almost unsymmetrical tetradentate Schiff base complexes have good cytotoxicity. The synthetic complexes bearing the unsymmetrical tetradentate Schiff base ligands with different substituted groups in the salicyl ring indicate different cytotoxicity. The obtained Fe(III) complexes are more cytotoxic than Cu(II) complexes and relative unsymmetric Schiff base ligands.
1. Introduction
Tetradentate salen-type Schiff bases obtained by the condensation of ethylendiamine derivatives with salicylaldehydes are attracted by many researchers because of their synthetic availability and interesting applications including catalytic, biological chemistry [1, 2] and coordination chemistry [3]. Transition metal complexes of tetradentate Schiff base ligands occupy a principal role in coordination chemistry for analysis, catalysis, materials science, and biochemistry [4–7]. Metallosalens are highly versatile coordination compounds with a wide range of bioinorganic and medicinal chemistry such as enzyme mimics, sensing, bioimaging, and medicinal applications [8, 9]. Some metal salen complexes have good DNA binding and RNA cleavage activity [10–12]. They have shown diverse structures and properties generating a variety of stereochemistry and bonding interactions [13, 14]. Besides, the synthesis, characterization, and applications of symmetrical tetradentate Schiff base complexes have been thoroughly studied and reported in the literature [15–17] recently, transition metal complexes with unsymmetrical tetradentate Schiff base ligands were reported for various applications [18–21]. Particularly, some synthetic Cu(II) and Fe(III) complexes with unsymmetrical tetradentate Schiff base ligands show potential DNA binding ability and bioactivity [22–26]. In this study, we continue to describe the synthesis, characterization, and in vitro cytotoxicity of the copper(II) and iron(III) complexes with some unsymmetrical tetradentate Schiff bases.
2. Materials and Methods
Analytical reagent grade chemicals such as o-phenylenediamine (98%) and salicylaldehydes were obtained from Across Organics and used without any purification. All solvents were purified by following the appropriate purification procedures.
Ultra-high performance liquid chromatography combined with hybrid quadrupole time-of-flight tandem mass spectra (UPLC-Q-TOF-MS) of the prepared unsymmetrical tetradentate Schiff base ligands were conducted on an ExionLC AC Series HPLC system coupled with a hybrid quadrupole time-of-flight tandem mass spectrometer (X500R QTOF System) equipped with Turboionspray source. Chromatographic separation was performed on a Kinetex C18 column (30 mm × 2.1 mm, 1.7 µm), and the column temperature was maintained at 30°C. The mobile phase consisted of methanol and water containing 0.1% formic acid in gradient mode of 50% methanol for 0–5 min and 100% methanol at 5 min with a flow rate of 0.3 mL·min−1. Electrospray ionization mass spectra (m/z) of the synthetic complexes were estimated on Agilent 6310 Ion Trap spectrometer (ESI-MS). Infrared spectra (4000–400 cm−1) were recorded on a Perkin Elmer Spectrum Two spectrophotometer using KBr pellet. 1H-NMR and 13C-NMR spectra were determined in DMSO-d6 solution using a Bruker Advance 500 MHz NMR spectrometer with TMS as the internal standard and chemical shifts (δ) were recorded in ppm. UV-Visible absorption spectra of the complexes (200–600 nm) were measured in methanol solution (2 × 10−5 M) on Perkin Elmer Lambda UV-35 spectrophotometer at room temperature. The effective magnetic measurements of the obtained complexes (µeff) were carried out at room temperature using a magnetic susceptibility balance (Mark 1, serial No. 25179) of Sherwood Scientific Ltd.
2.1. Synthesis of Unsymmetrical Tetradentate Schiff Base Ligands
Unsymmetrical tetradentate Schiff base ligands were prepared by one-pot method including two-step reactions similarly according to the known procedures [27, 28]. In the first step, monocondensed half-units were prepared by the condensation of o-phenylenediamine with 5-t-butylsalicylaldehyde or 5-methoxysalicylaldehyde. In the second step, the monocondensed half-unit was mixed with a methanol solution of relative salicylaldehydes. O-phenylenediamine (15.5 mmol) dissolved in methylene chloride (25 mL) was added in a 100 ml flask containing 5-t-butylsalicylaldehyde or 5-methoxysalicylaldehyde (15.5 mmol) and was stirred for 3 h. After the monocondensed half-units were obtained completely by TLC checking, relative salicylaldehyde (15.5 mmol) in methanol (25 mL) was added and the new mixture was stirred under ultrasound for 1 h more and then the productive precipitates were collected after filtered and washed by cold ethanol. The products were recrystallized from ethyl acetate and dried in vacuo.
4-(tert-butyl)-2-(E)-((2-(E)-2-hydroxybenzylidene)amino)phenyl)imino)methyl)phenol (H2L1): yellow powder (72%). Q-TOF-MS (m/z): 373.1909 [M + H]+ (Cal.: 373.4675); IR (KBr, cm−1): 2967 (v, C−H), 2748 (v, O−H), 1611 (v, C=N), 1567 (v, C=C), 1484, 1369, 1277 (v, C−N), 1186 (v, C−O); 823, 758 (δ, C-H), 506; 1H-NMR (DMSO-d6, 500 MHz, δ (ppm), J (Hz)): δ 12.91 and 12.57 (s, 2H, 2OH), 8.94 and 8.93 (s, 2H, 2HC=N), 7.71–7.65 (m, 2H, 2H-Sal), 7.48–7.45 (m, 3H, 2H-Ph, 1H-Sal), 7.43–7.33 (m, 3H, 2H-Ph, 1H-Sal), 6.99–6.93 (m, 2H, 2H-Sal), 6.90 (d, J = 10.0 Hz, 1H, H-Sal), 1.29 (s, 9H, (CH3)3); 13C-NMR (DMSO-d6, 125 MHz, δ (ppm)): δ 163.97 and 163.83 (2C, 2C=N), 160.38 and 160.31 (2C, 2C-O), 158.03 (1C, C-t-Bu), 142.47 and 142.12 (2C, 2C-Ph), 141.21 (1C, C-Sal), 133.21 (1C, C-Sal), 132.36 (1C, C-Sal), 130.60 (1C, C-Sal), 128.51 (1C, C-Sal), 127.73 and 127.55 (2C, 2C-Ph), 119.55 (1C, C-Sal), 119.41 (1C, C-Sal), 118.95 and 118.82 (2C, 2C-Ph), 116.58 (1C, C-Sal), 116.16 (1C, C-Sal), 33.74 (1C, C(CH3)3), 30.96 (3C, 3CH3); UV-Vis (MeOH, 2 × 10−5 M, nm, ε): 234 (30,000); 275 (24,500); 335 (18,500).
4-(tert-butyl)-2-(E)-((2-(E)-5-fluoro-2-hydroxybenzylidene)amino)phenyl)imino)methyl)phenol (H2L2): yellow powder (67%); Q-TOF-MS (m/z): 391.1799 [M + H]+ (Cal. 391.4580); IR (KBr, cm−1): 2919 (v, C−H), 2718 (v, O−H), 1615 (v, C=N); 1574 (v, C=C), 1485, 1356, 1264 (v, C−N), 1202 (v, C−O), 821, 757 (δ, C-H), 509; 1H-NMR (DMSO-d6, 500 MHz, δ (ppm)): δ 12.61 and 12.59 (2H, 2OH), 8.94 and 8.91 (2H, 2HC=N), 7.69 (d, J = 2.5, 1H, H-Sal), 7,53 (dd, J = 9.0, 3.5, 1H, H-Sal), 7.48–7.39 (m, 5H, 2H-Sal, 3H-Ph), 7.27 (dt, J = 9.0, 3.5, 1H, H-Ph), 6.97 (q, J = 4.5 Hz, 1H, H-Sal), 6.89 (d, J = 8.5, 1H, H-Sal), 1.29 (s, 9H, (CH3)3)); 13C-NMR (DMSO-d6, 125 MHz, δ (ppm)): δ 163.89 and 162.13 (2C, 2C=N), 158.08 and 156.50 (2C, 2C-O), 155.77 and 155.90 (1C, C-F), 142.39 (1C, C-C((CH3)3), 142.14 and 141.20 (2C, 2C-Ph), 130.61 (1C, C-Sal), 128.47 (1C, C-Sal), 127.95 and 127.56 (2C, 2C-Ph), 120.33 and 120.14 (2C, 2C-Ph), 119.83 and 119.77 (1C, C-Sal(F)), 119.52 (1C, C-Sal), 118.83 (1C, C-Sal), 118.01 and 117.95 (1C, C-Sal(F)), 116.66 and 116.47 (1C, C-Sal(F)), 116.19 (1C, C-Sal), 33.73 (1C, C-(CH3)3), 31.11 (3C, 3CH3); UV-Vis (MeOH, 2 × 10−5 M, nm, ε): 234 (21,500); 275 (17,500); 340 (13,500).
4-(tert-butyl)-2-(E)-((2-(E)-5-chloro-2-hydroxybenzylidene)amino)phenyl)imino)methyl)phenol (H2L3): yellow powder (61%); Q-TOF-MS (m/z): 429.2555 [M + Na]+ (Cal. 429.8941); IR (KBr, cm−1): 2952 (v, C−H), 2697 (br, v, O−H), 1614 (v, C=N), 1567 (v, C=C), 1486, 1354, 1277 (v, C−N); 1181 (v, C−O), 823, 757 (δ, C−H), 506; 1H-NMR (CDCl3, 500 MHz, δ (ppm)): δ 13.09 and 12.74 (2H, 2OH), 8.64 and 8.56 (2H, 2HC=N), 7.43 (dd, J = 8.5, 2.5, 1H, H-Sal), 7.36–7.33 (m, 4H, 2H-Ph, 2H-Sal), 7.29 (dd, J = 8.5, 2.5, 1H, H-Sal), 7.24–7.22 (m, 2H, 2H-Ph), 7.00 (d, J = 7.0, 1H, H-Sal), 6.98 (d, J = 7.0, 1H, H-Sal), 1.32 (s, 9H, (CH3)3); 13C-NMR (CDCl3, 125 MHz, δ (ppm)): δ 164.30 and 162.26 (2C, 2C=N), 159.96 and 159.08 (2C, 2C-O), 142.96 (1C, C-C(CH3)3), 142.03 and 141.79 (2C, 2C-Ph), 133.09 (1C, C-Sal), 131.19 (1C, C-Sal), 131.09 (1C, 1C-Sal), 128.72 (1C, C-Sal), 128.16 and 127.60 (2C, C-Ph), 123.52 (1C, C-Cl), 119.97 (1C, C-Sal), 119.72 and 119.62 (2C, 2C-Ph), 119.16 (1C, C-Sal), 118.46 (1C, C-Sal), 117.15 (1C, C-Sal), 34.03 (1C, C(CH3)3), 31.40 (3C, 3CH3); UV-Vis (MeOH, 2 × 10−5 M, nm, ε): 235 (28,000); 276 (18,500); 335 (15,000).
4-bromo-2-((E)-((2-(((E)-5-(tert-butyl)-2-hydroxybenzylidene)amino)phenyl)imino)methyl)phenol (H2L4): yellow powder (56%); Q-TOF-MS (m/z): 451,1032 [M + H]+ (Cal. 452.3636); IR (KBr, cm−1): 2953 (v, C−H), 2678 (br, v, O−H), 1612 (v, C=N), 1561 (v, C=C), 1474, 1354, 1276 (v, C−N), 1181 (v, C−O), 821, 756 (δ, C−H), 507; 1H-NMR (DMSO-d6, 500 MHz, δ (ppm)): δ 13.03 and 12.51 (2H, 2OH), 8.94 and 8.91 (2H, 2HC=N), 7.89 (d, J = 2.0, 1H, H-Sal), 7.71 (d, J = 2.5, 1H, H-Sal), 7.54 (dd, J = 9.0, 2.5, 1H, H-Sal), 7.47–7.40 (m, 5H, 2H-Ph, 3H-Sal), 6.93 (d, J = 8.5, 1H, H-Ph), 6.88 (d, J = 8.5, 1H, H-Ph), 1.29 (s, 9H, (CH3)3); 13C-NMR (DMSO-d6, 125 MHz, δ (ppm)): δ 163.88 and 162.14 (2C, 2C=N)), 159.49 and 158.01 (2C, 2C-O), 142.53 (1C, C-C((CH3)3), 141.80 and 141.24 (2C, 2C-Ph), 135.53 (1C, C-Sal), 133.78 (1C, C-Sal), 130.65 (1C, C-Sal), 128.39 and 128.06 (2C, 2C-Ph), 127.54 (1C, C-Sal), 121.32 (1C, C-Sal), 119.60 and 119.54 (2C, 2C-Ph), 119.06 (1C, C-Sal), 118.87 (1C, C-Sal), 116.18 (1C, C-Sal), 109.72 (1C, C-Br), 33.74 (1C, C(CH3)3); 31.11 (3C, 3CH3); UV-Vis (MeOH, 2 × 10−5 M, nm, ε): 235 (26,000); 275 (17,500); 337 (14,000).
2-((E)-((2-(((E)-2-hydroxy-3-methoxybenzylidene)amino)phenyl)imino)methyl)-4-methoxyphenol (H2L5): orange powder (53%); Q-TOF-MS (m/z): 377,1482 [M + H]+ (Cal. 377.4132); IR (KBr, cm−1): 2936 (v, C−H), 2737 (br, v, O−H), 1611 (v, C=N), 1578 (v, C=C), 1464, 1364, 1271 (v, C−N), 1212 (v, C−O), 1041, 818, 740 (δ, C−H), 481; 1H-NMR (DMSO-d6, 500 MHz, δ (ppm)): δ 13.30 and 12.00 (2H, 2OH), 8.93 and 8.90 (2H, 2HC=N), 7.49 (m, 1H, H-Ph), 7.43–7.38 (m, 3H, 3H-Ph), 7.34 (d, J = 3.5, 1H, H-Sal), 7.23 (dd, J = 8.0, 1.0, 1H, H-Sal), 7.10 (dd, J = 8.0, 1.5, 1H, H-Sal), 7.03 (dd, J = 9.0, 3.0, 1H, H-Sal), 6.90 (d, J = 9.5, 1H, 1H-Sal), 6.89 (t, J = 7.5, 1H, H-Sal), 3.80 (s, 3H, OCH3), 3.76 (s, 3H, OCH3); 13C-NMR (DMSO-d6, 125 MHz, δ (ppm): δ 163.65 and 162.62 (2C, 2C=N), 154.21 (1C, C−OH); 151.92 (1C, C−OH), 151.20 (1C, C−OMe), 148.00 (1C, C−OMe), 142.66 and 141.68 (2C, 2C-Ph), 127.84 and 127.63 (2C, 2C-Ph), 123.76 (1C, C-Sal), 120.82 (1C, C-Sal), 119,69 (1C, C-Sal), 119.47 (2C, C-Sal), 119.25 (1C, C-Sal), 118.33 and 117,54 (2C, 2C-Ph), 115.45 (1C, C-Sal), 114.38 (1C, C-Sal), 55.71 (1C, O-CH3), 55.54 (1C, O-CH3); UV-Vis (MeOH, 2 × 10−5 M, nm, ε): 232 (27,500); 279 (20,500); 340 (14,500).
2.2. Preparation of Unsymmetrical Schiff Base Complexes
Unsymmetrical Schiff base complexes were prepared from the coordination between the obtained unsymmetrical Schiff base ligands and CuCl2·2H2O or FeCl3·6H2O in a molecular ratio 1 : 1. 1.0 mmol CuCl2·2H2O or FeCl3·6H2O dissolved in ethanol was added to an ethanol solution of 1.0 mmol ligand. The reaction mixtures were refluxed at the presence of 1.0 mmol Na2CO3 for 3 hrs; then, the reaction mixtures were cooled to room temperature. The productive precipitates were collected after filtered and washed by cold ethanol and then dried in vacuo.
[Cu(II)L1]: dark brown powder, 91%; ESI-MS (m/z): 433.9 [M + H]+ (Cal. 434.9); IR (KBr, cm−1): 2954 (v, C−H), 1607 (v, C=N), 1521, 1458 (v, C=C), 1379, 1257 (v, C−N), 1182 (v, C−O), 1148, 832, 745 (δ, C−H), 530 (Cu−O), 430 (Cu−N); UV-Vis (MeOH, 2 × 10−5 M, nm, ε): 249 (22,500), 310 (15,500), 343 (11,500), 424 (10,000); µeff = 1.81 BM.
[Cu(II)L2]: pale yellow solid, 92%; ESI-MS (m/z): 451.9 [M + H]+ (Cal. 452.9); IR (KBr, cm−1): 2955 (v, C−H), 1619 (v, C=N), 1525, 1462 (v, C=C), 1382, 1258 (v, C−N), 1179 (v, C−O), 1149, 829, 743 (δ, C−H), 531 (Cu−O), 430 (Cu−N); UV-Vis (MeOH, 2 × 10−5 M, nm, ε): 249 (25,000), 300 (18,000), 343 (13,500), 425 (10,500); µeff = 1.97 BM.
[Cu(II)L3]: pale yellow powder, 92%; ESI-MS (m/z): 467.9 [M + H]+ (Cal. 469.4); IR (KBr, cm−1): 2957 (v, C−H), 1616 (v, C=N), 1524, 1456 (v, C=C), 1379, 1259 (v, C−N), 1179 (v, C−O), 1109, 824, 746 (δ, C−H), 538 (Cu−O), 433 (Cu−N); UV-Vis (MeOH, 2 × 10−5 M, nm, ε): 250 (34,000), 301 (20,500), 342 (15,000), 425 (13,500); µeff = 1.96 BM.
[Cu(II)L4]: brown powder, 91%; ESI-MS (m/z): 513.9 [M + H]+ (Cal. 513.9); IR (KBr, cm−1): 2962 (v, C−H), 1617 (v, C=N), 1518, 1461 (v, C=C), 1384, 1257 (v, C−N), 1172 (v, C−O), 811, 755 (δ, C−H); 522 (Cu−O), 427 (Cu−N); UV-Vis (MeOH, 2 × 10−5 M, nm, ε): 250 (28,500), 301 (17,500), 342 (13,000), 426 (11,500); µeff = 2.00 BM.
[Cu(II)L5]: red brown powder, 90%; ESI-MS (m/z): 437.9 [M + H]+ (Cal. 437.9); IR (KBr, cm−1) 2928 (v, C−H), 1604 (v, C=N), 1531, 1473 (v, C=C), 1369, 1222 (v, C−N), 1194 (v, C−O), 1160, 818, 742 (δ, C−H), 528 Cu−O), 411 (Cu−N); UV-Vis (MeOH, 2 × 10−5 M, nm, ε): 245 (30,500), 318 (16,500), 356 (12,500), 440 (7,500); µeff = 1.94 BM.
[Fe(III)L1Cl]: dark brown powder (89%); ESI-MS (m/z): 425.9 [M–Cl]− (Cal. 426.2); IR (KBr, cm−1): 2951 (v, C-H), 1602 (v, C=N), 1528 (v, C=C), 1461, 1375, 1258 (v, C‒N), 1190 (v, C‒O), 1149, 813, 747 (δ, C‒H); 613, 536 (Fe‒O); 475 (Fe‒N); UV-Vis (MeOH, 2 × 10−5 M, nm, ε): 246 (28,000), 297 (34,500), 372 (16,500), 424 (10,500); µeff = 5.98 BM.
[Fe(III)L2Cl]: red brown powder (93%); ESI-MS (m/z): 443.9 [M–Cl]− (Cal. 444.2); IR (KBr, cm−1): 2951 (v, C-H), 1611 (v, C=N), 1530 (v, C=C), 1464, 1376, 1254 (v, C‒N), 1179 (v, C‒O), 1143, 828, 758 (δ, C‒H); 532 (Fe‒O); 482 (Fe‒N); UV-Vis (MeOH, 2 × 10−5 M, nm, ε): 246 (26,000), 297 (32,000), 375 (14,500), 427 (10,000); µeff = 5.96 BM.
[Fe(III)L3Cl]: brown solid powder (92%); ESI-MS (m/z): 459.9 [M–Cl]− (Cal. 460.7); IR (KBr, cm−1): 2964 (v, C−H), 1610 (v, C=N), 1527 (v, C=C), 1453, 1378, 1260 (v, C−N), 1181 (v, C‒O), 826, 760 (δ, C‒H), 669, 535 (Fe‒O), 479 (Fe‒N); UV-Vis (MeOH, 2 × 10−5 M, nm, ε): 247 (31,500), 297 (35,500), 375 (15,500), 424 (11,500); µeff = 5.99 BM.
[Fe(III)L4Cl]: brown solid powder (90%); ESI-MS (m/z): 503.9 [M–Cl]− (Cal. 505.1); IR (KBr, cm−1): 2961 (v, C−H), 1604 (v, C=N), 1523 (v, C=C), 1449, 1376, 1258 (v, C−N), 1183 (v, C‒O), 824, 759 (δ, C‒H), 650, 534 (Fe‒O), 476 (Fe‒N); UV-Vis (MeOH, 2 × 10−5 M, nm, ε): 243 (35,000), 304 (29,500), 382 (15,500), 426 (9,500); µeff = 5.90 BM.
[Fe(III)L5Cl]: dark brown solid powder (85%); ESI-MS (m/z): 429.9 [M–Cl]− (Cal. 430.2); IR (KBr, cm−1): 2925 (v, C−H), 1599 (v, C=N), 1533 (v, C=C), 1461, 1378, 1251 (v, C−N), 1185 (v, C‒O), 820, 734 (δ, C‒H), 577, 535 (Fe‒O), 415 (Fe‒N); UV-Vis (MeOH, 2 × 10−5 M, nm, ε): 242 (30,000), 305 (34,500), 390 (13,500), 452 (8,000); µeff = 5.94 BM.
2.3. Electrochemical Studies
The electrochemical studies of all complexes were performed using Zahner IM6 instrument. The cyclic voltammograms of Cu(II) complexes and Fe(III) complexes were recorded using 1.0 × 10−3 M concentration in acetonitrile solution and 0.1 M LiClO4 as supporting electrolyte. The working electrode was platinum wire which was polished, washed, and dried. The reference electrode was Ag/AgCl/KCl and platinum wire was the counter electrode. All experiments were performed in standard electrochemical cells at room temperature at a scan rate of 100 mV·s−1 with the potential window −3 V to +3 V vs Ag/AgCl/KCl reference electrode.
2.4. In Vitro Cytotoxicity
MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium) method was used to estimate in vitro cytotoxicity of obtained ligands and synthetic complexes. Human cancer cells KB and Hep-G2 were cultured in DMEM with 10% fetal bovine serum, 100 µg/mL streptomycin, 100 units/mL penicillin, and 2 mmol/L L-glutamine at 37°C in a humidified atmosphere with 5% CO2 and 95% air. Cancer cells were cultivated in 96-well plates for 24 hrs followed by treating with different concentrations of complexes in DMSO and incubated continuously for 48 hrs more. Then, testing cells were exposed to 10 µL of freshly prepared MTT (5 mg/ml) solution and incubated for 4 h at 37°C in an atmosphere of 5% CO2. The formazan crystals obtained during MTT incubation were dissolved in 100 µL of DMSO. The absorbance was recorded at 540 nm on Genios TECAN spectrophotometer. The experiments were carried out in triplicate for every concentration of the complexes. The percent viable cells were plotted as a function of concentration to determine the IC50 values presented in Table 1.
Table 1.
In vitro cytotoxicity of the unsymmetrical tetradentate Schiff base Cu(II) complexes and Fe(III) complexes.
| Compound | IC50 (µM) | |
|---|---|---|
| KB | Hep-G2 | |
| H2L1 | >100 | >100 |
| [Cu(II)L1] | 14.71 ± 0.11 | 21.04 ± 1.08 |
| [Fe(III)L1Cl] | 0.68 ± 0.05 | 0.83 ± 0.05 |
| H2L2 | >100 | >100 |
| [Cu(II)L2] | 46.46 ± 2.42 | 18.05 ± 0.09 |
| [Fe(III)L2Cl] | 3.25 ± 0.16 | 7.05 ± 0.25 |
| H2L3 | 80.49 ± 0.76 | 38.32 ± 1.28 |
| [Cu(II)L3] | 70.60 ± 3.29 | 35.99 ± 0.17 |
| [Fe(III)L3Cl] | 1.84 ± 0.10 | 6.07 ± 0.22 |
| H2L4 | >100 | 51.08 ± 2.42 |
| [Cu(II)L4] | 85.96 ± 4.57 | 50.52 ± 0.26 |
| [Fe(III)L4Cl] | 2.76 ± 0.17 | 19.78 ± 1.07 |
| H2L5 | >100 | >100 |
| [Cu(II)L5] | 96.71 ± 5.11 | >100 |
| [Fe(III)L5Cl] | 1.95 ± 0.13 | 2.38 ± 0.17 |
| Ellipticine | 1.14 ± 0.06 | 2.11 ± 0.12 |
3. Results and Discussion
3.1. Synthesis and Characterization
The unsymmetrical tetradentate Schiff base ligands (H2L1–H2L5) (Table 2) were synthesized following a one-pot procedure in moderate yields (53–72%) (Scheme 1) and high purity (>98.5%) performed by UPLC (supplementary data). The obtained ligands are soluble in organic solvents such as ethanol, ethyl acetate, and dichloromethane. These compounds were characterized by Q-TOF-MS, IR, 1H-NMR, 13C-NMR, and UV-Vis spectroscopies. Cu(II) and Fe(III) complexes were prepared following the coordination of CuCl2·2H2O or FeCl3·6H2O with each obtained ligand in good yields (85–93%) in ethanol (Scheme 1). The synthetic unsymmetrical tetradentate Schiff base complexes are soluble in DMSO, acetonitrile, methanol, and dichloromethane. These complexes were also characterized by ESI-MS, IR, and UV-Vis spectroscopies.
Table 2.
Unsymmetrical tetradentate Schiff base ligands and their Cu(II) and Fe(III) complexes.
| R1 | R2 | R3 | Ligand | Cu(II) complex | Fe(III) complex |
|---|---|---|---|---|---|
| t-Bu | H | H | H2L1 | [Cu(II)L1] | [Fe(III)L1Cl] |
| t-Bu | F | H | H2L2 | [Cu(II)L2] | [Fe(III)L2Cl] |
| t-Bu | Cl | H | H2L3 | [Cu(II)L3] | [Fe(III)L3Cl] |
| t-Bu | Br | H | H2L4 | [Cu(II)L4] | [Fe(III)L4Cl] |
| OCH3 | H | OCH3 | H2L5 | [Cu(II)L5] | [Fe(III)L5Cl] |
Scheme 1.
Synthesis of unsymmetrical tetradentate Schiff base ligands and their Cu(II) and Fe(III) complexes.
In the high resolution mass spectra, Q-TOF-MS, the pseudo-molecular ion signals of the obtained unsymmetrical ligands are observed as [M + H]+ or [M + Na]+ which clearly indicate molecular masses suitable for the suggested formulae. In ESI-MS spectra of synthetic complexes, pseudo-molecular ion peaks are observed as [M + H]+ for Cu(II) complexes and [M–Cl]− for Fe(III) complexes. They are quite good in agreement with the suggested formulae (Table 2).
1H-NMR spectra of synthetic unsymmetrical tetradentate ligands have typical signals at 13.30–12.00 ppm for two different OH groups and 8.94–8.56 ppm for couples of different HC=N groups which showed obvious evidence for unsymmetrical property of obtained ligands. There are typical signals as single signals at 1.32–1.29 ppm for 9 protons of C(CH3)3 groups for H2L1–H2L4 and single signals at 3.80 and 3.76 ppm for 2 different methoxy groups of H2L5. In 13C-NMR of these tetradentate Schiff base ligands, there are also typical signals at 164.30–162.13 ppm for two different C=N groups, at 160.38–151.92 ppm for two different C−O groups. They are obvious evidences for the unsymmetrical property of synthetic tetradentate ligands. They are characteristic signals at 34.03–33.73 ppm and 31.40–30.96 ppm for carbon signals of t-Bu groups of H2L1–H2L4, at 55.71 and 55.54 ppm, for 2 different methoxy groups of H2L5.
In IR spectra, there are typical signals for the formation of ligands at 1615–1611 cm−1 of the stretching vibrations (v) of C=N bondings. The typical signals at 2748–2678 cm−1 belong to v(O−H), at 1277–1264 cm−1 of v(C−N) and at 1212–1181 cm−1 of v(C−O). IR spectra of obtained Cu(II) complexes possess characteristic signals at 1619–1604 cm−1 of v(C=N), at 1259–1222 cm−1 of v(C−N), and at 1179–1148 cm−1 of v(C−O). There are new signals at 538–522 cm−1 and 504–411 cm−1 for the stretching vibrations of Cu−N and Cu−O coordination bondings, respectively. In IR spectra of synthetic Fe(III) complexes, there are typical signals at 1611–1599 cm−1 of v(C=N), at 1260–1251 cm−1 of v(C−N), and 1185–1143 cm−1 of v(C−O). New signals are found at 536–532 cm−1 and 482–415 cm−1 for new bonding vibrations of Fe−N and Fe−O, respectively. The disappearance of O−H signals and the new formation of M−N and M−O are the obvious evidence of the coordination of center metals with obtained ligands through the nitrogen atoms of azomethine groups and oxygen atoms of the phenolic groups (Table 3).
Table 3.
Selected typical signals of IR (cm−1) spectra of the obtained ligands and synthetic complexes.
| Compound | v (O−H) | v (C=N) | v (C−N) | v (C−O) | δ (O−H) | v (M−N) | v (M−O) |
|---|---|---|---|---|---|---|---|
| H2L1 | 2748 | 1611 | 1277 | 1187 | 758 | — | — |
| [Cu(II)L1] | — | 1607 | 1257 | 1148 | 745 | 530 | 503 |
| [Fe(III)L1Cl] | — | 1602 | 1258 | 1149 | 747 | 536 | 475 |
| H2L2 | 2718 | 1615 | 1264 | 1202 | 757 | — | — |
| [Cu(II)L2] | — | 1619 | 1258 | 1149 | 743 | 531 | 504 |
| [Fe(III)L2Cl] | — | 1611 | 1254 | 1143 | 742 | 532 | 482 |
| H2L3 | 2697 | 1614 | 1277 | 1181 | 757 | — | — |
| [Cu(II)L3] | — | 1616 | 1259 | 1179 | 746 | 538 | 504 |
| [Fe(III)L3Cl] | — | 1610 | 1260 | 1145 | 760 | 535 | 479 |
| H2L4 | 2678 | 1612 | 1276 | 1181 | 756 | — | — |
| [Cu(II)L4] | — | 1617 | 1257 | 1172 | 755 | 522 | 504 |
| [Fe(III)L4Cl] | — | 1604 | 1258 | 1145 | 759 | 534 | 476 |
| H2L5 | 2737 | 1611 | 1271 | 1212 | 740 | — | — |
| [Cu(II)L5] | — | 1604 | 1222 | 1160 | 742 | 528 | 411 |
| [Fe(III)L5Cl] | — | 1599 | 1251 | 1185 | 734 | 535 | 415 |
3.2. Electronic Spectra and Magnetic Moments
On the UV-Vis spectra of the obtained ligands there were three main absorption bands with maximum absorption wavelengths (λabs) at about 235 nm (42,553 cm−1) assigned to the π ⟶ π∗ electronic transitions of the aromatic rings, at about 275 nm (36,364 cm−1) and 335 nm (29,851 cm−1) attributed to n ⟶ π∗ electronic transitions associated with the transfer of lone pair situated at N and O of C=N and C−O groups, respectively [25]. There is a little difference between UV-Vis spectra of these unsymmetrical tetradentate ligands H2L1–H2L5 (Figure 1). Upon complexation, n ⟶ π∗ transition of ligand shifts to a longer wavelength; this indicates the coordination of ligand to metal [26].
Figure 1.
UV-Vis absorption spectra of unsymmetrical tetradentate Schiff base ligands.
In UV-Vis spectra of unsymmetrical tetradentate Schiff base Cu(II) complexes, besides the main absorption bands of interligand charge transfer transitions with λabs at about 245–250 nm and 300–360 nm (n ⟶ π∗), a new broad low-energy absorption band with λabs is observed at 380–500 nm which can be assigned to ligand-to-metal charge transfer (LMCT) and metal-to-ligand (MLCT) transitions [29, 30]. The d-d bands were not observed due to the low concentration (2 × 10−5 M) of the solutions. These bands should be low intensity in the region of 550–650 nm. UV-Vis absorption bands of [Cu(II)L1] − [Cu(II)L4] complexes are similar except UV-Vis absorption bands of [Cu(II)L5] complex which are shifted to a longer wavelength region due to the electron-donating property of the substituted methoxy groups (Figure 2).
Figure 2.
UV-Vis absorption spectra of unsymmetrical Schiff base Cu(II) complexes.
Magnetic measurements and electronic spectra were conducted in order to obtain information about geometry of the complexes. Copper(II) complexes, in the present study, show µeff values 1.81–2.00 BM which were consistent with presence of one unpaired electron. This behavior suggests square-planar geometry for the copper(II) complexes [31, 32].
In UV-Vis spectra of unsymmetrical tetradentate Schiff base Fe(III) complexes, besides the main absorption bands with wavelength maximum at 242–247 nm, 297–305 nm and a shoulder at 372–390 nm which may be assigned to interligand charge transfer transitions (n ⟶ π∗), there is a new broad low-energy absorption band with λabs at 375–485 nm which can belong to LMCT and MLCT transitions. The d-d bands were also not observed due to the low concentration (2 × 10−5 M) of the solutions. While UV-Vis absorption bands of [Fe(III)L1Cl] - [Fe(III)L4Cl] complexes are similar, UV-Vis absorption bands of [Fe(III)L5Cl] complex are also moved to a longer wavelength region when it contains the electron-donating methoxy groups reasonably (Figure 3).
Figure 3.
UV-Vis absorption spectra of unsymmetrical tetradentate Schiff base Fe(III) complexes.
Fe(III) complexes exhibit magnetic moments of 5.90–5.99 BM due to the presence of five unpaired electrons, which indicate an octahedral geometry around Fe(III) ions [21, 25].
3.3. Electrochemical Studies
The electrochemical behaviors of the synthetic unsymmetrical tetradentate Schiff base Cu(II) and Fe(III) complexes were investigated using cyclic voltammetry (CV). Cyclic voltammograms were recorded using a Zahner-elektrik IM6 instrument with a standard three-electrode setup, a platinum working electrode, a platinum wire as the counter electrode, and Ag/AgCl/KCl as the reference electrode, at room temperature with voltage scan rate = 100 mV·s−1. The concentration of complexes in acetonitrile was 1.0 × 10−3 M and 0.1 M LiClO4 was used as supporting electrolyte. The cyclic voltammetric profile of synthetic Cu(II) complexes is given in Figure 4. Interestingly, the CVs of synthetic Cu(II) complexes show cathodic peaks at (−)1.882–(−) 1.782 V for the reduction of Cu(II) ⟶ Cu(I). A similar type of cathodic response was found in reported Cu(II) complexes [33]. Some slight differences in the reduction potentials of these Cu(II) complexes should be attributed to the effects of the electron-donating methoxy and electron-withdrawing halogen substituted groups (Table 4).
Figure 4.
Cyclic voltammograms of unsymmetrical tetradentate Schiff base Cu(II) complexes.
Table 4.
Reduction potentials of synthetic Cu(II) and Fe(III) complexes.
| Complex | Epc (V) |
|---|---|
| [Cu(II)L1] | −1.882 |
| [Cu(II)L2] | −1.782 |
| [Cu(II)L3] | −1.817 |
| [Cu(II)L4] | −1.832 |
| [Cu(II)L5] | −1.782 |
| [Fe(III)L1Cl] | −1.317 |
| [Fe(III)L2Cl] | −1.183 |
| [Fe(III)L3Cl] | −1.195 |
| [Fe(III)L4Cl] | −1.203 |
| [Fe(III)L5Cl] | −1.164 |
Similarly, the cyclic voltammograms of synthetic Fe(III) complexes are given in Figure 5. Synthetic Fe(III) complexes possess well-defined cathodic peaks at (−) 1.317–(−) 1.164 V for the reduction of Fe(III) ⟶ Fe(II) probably. A similar type of cathodic signals was observed in the reported Fe(III) complexes [34]. The reduction progresses of these Fe(III) complexes are seemingly taken easier than the ones of the Cu(II) complexes. Some difference in the reduction potentials of the Fe(III) complexes must be expected from the electronic effects of the electron-donating and electron-withdrawing substituted groups (Table 4).
Figure 5.
Cyclic voltammograms of unsymmetrical tetradentate Schiff base Fe(III) complexes.
3.4. In Vitro Cytotoxicity Assay
The cytotoxicity of relative unsymmetric ligands, obtained Cu(II) complexes, and Fe(III) complexes against KB and Hep-G2 human cancer cells was determined by MTT-dye reduction method as the standard bioassay using ellipticine as the standard compound for comparison purposes. The bioassay results are presented in Table 1.
The results showed that the synthetic Cu(II) complexes have good cytotoxicity for KB and Hep-G2 (IC50 < 100 µM) except [Cu(II)L5] and better than the relative ligands. The synthetic complexes with different substituted groups possess different anticancer activity. The cytotoxic activity order of Cu(II) complexes follows as [Cu(II)L1] > [Cu(II)L2] > [Cu(II)L3] > [Cu(II)L4] > [Cu(II)L5]. The obtained Fe(III) complexes have very excellent cytotoxicity for KB and Hep-G2 (IC50 < 20 µM), much better than Cu(II) complexes because Fe(III) complexes with the electrochemical reduction potentials of (−) 1.317–(−) 1.164 V can carry out the redox reaction easier than Cu(II) complexes with the electrochemical reduction potentials of (−)1.882–(−) 1.782 V probably. Fe(III) complexes exhibit an octahedral geometry around central metal ions while copper(II) complexes behave in a square-planar geometry. The cytotoxic activity order of Fe(III) complexes is [Fe(III)L1Cl] > [Fe(III)L5Cl] > [Fe(III)L2Cl]∼[Fe(III)L3Cl] > [Fe(III)L4Cl]. The substituted groups in salicyl rings have some effects to the complexes including their electrochemical properties and their bulk. [Fe(III)L1Cl] without substituted group in the second salicyl ring has the best cytotoxic activity for KB and Hep-G2 with IC50 = 0.68 and 0.83 µM, respectively, even better than the standard compound, ellipticine, with IC50 = 1.14 and 2.11 µM for KB and Hep-G2, respectively.
4. Conclusions
Series of Cu(II) and Fe(III) complexes with unsymmetrical tetradentate Schiff base ligands were synthesized in good yields and characterized by ESI-MS, IR, UV-Vis, and CV spectroscopies. The characteristic spectra of ligands have changed when the coordination of the ligands to metals was carried out. The electron-donating and electron-withdrawing substituted groups of ligands have some effects on their spectral properties. The strong UV-Vis absorption bands for MLCT of the Cu(II) complexes were observed at 422–440 nm, while the weak UV-Vis absorption bands for MLCT of the Fe(III) complexes were observed at 425–450 nm. The obtained copper(II) complexes with µeff values 1.81–2.00 BM show square-planar geometry for the copper(II) complexes. The Fe(III) complexes with magnetic moments of 5.90–5.99 BM indicate an octahedral geometry around Fe(III) ions. Interestingly, the CVs of synthetic Cu(II) complexes show cathodic peaks at (−)1.882–(−) 1.782 V for Cu(II) ⟶ Cu(I) reduction when the obtained Fe(III) complexes possess well-defined cathodic peaks at (−) 1.317–(−) 1.164 V for Fe(III) ⟶ Fe(II) reduction. The cytotoxicity in vitro for human cancer cells KB and Hep-G2 was estimated for synthetic Cu(II) complexes, Fe(III) complexes, and the relative ligands. The results showed that the synthetic Cu(II) complexes have good cytotoxicity for KB and Hep-G2 (IC50 < 100 µM) except [Cu(II)L5]. The obtained Fe(III) complexes have excellent cytotoxicity for KB and Hep-G2 (IC50 < 20 µM), much better than Cu(II) complexes and the relative ligands. Among them, [Fe(III)L1Cl] showed the best cytotoxic activity for KB and Hep-G2 with IC50 = 0.68 and 0.83 µM, respectively, better than the standard compound, ellipticine with IC50 = 1.14 and 2.11 µM for KB and Hep-G2, respectively.
Acknowledgments
This research was financially supported by Vietnam NAFOSTED, under Grant no. 104.01–2018.366.
Data Availability
The data used to support the findings of this study are included within the article and the supplementary information file.
Conflicts of Interest
The authors declare that there are no conflicts of interest regarding the publication of this paper.
Supplementary Materials
This section contains the spectral data of synthetic unsymmetrical tetradentate Schiff base ligands, Cu(II) and Fe(III) complexes. The spectral data of synthetic unsymmetrical tetradentate Schiff base ligands consist of UPLC, Q-TOF-MS, IR, UV-Vis, 1H-NMR, and 13C-NMR spectra. The spectral data of the obtained Cu(II) and Fe(III) complexes include ESI-MS, IR, UV-Vis, and CV spectra.
References
- 1.Mota V. Z., de Carvalho G. S. G., Corbi P. P., et al. Crystal structure and theoretical studies of the keto-enol isomerism of N,N′-bis(salicylidene)-o-phenylenediamine (salophen) Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy. 2012;99:110–115. doi: 10.1016/j.saa.2012.09.002. [DOI] [PubMed] [Google Scholar]
- 2.Ajloo D., Shabanpanah S., Shafaatian B., et al. Interaction of three new tetradentates Schiff bases containing N2O2 donor atoms with calf thymus DNA. International Journal of Biological Macromolecules. 2015;77:193–202. doi: 10.1016/j.ijbiomac.2015.03.016. [DOI] [PubMed] [Google Scholar]
- 3.Pessoa J. C., Correia I. Salan vs. salen metal complexes in catalysis and medicinal applications: virtues and pitfalls. Coordination Chemistry Reviews. 2019;388:227–247. doi: 10.1016/j.ccr.2019.02.035. [DOI] [Google Scholar]
- 4.Golbedaghi R., Fausto R. Coordination aspects in schiff bases cocrystals. Polyhedron. 2018;155:1–12. doi: 10.1016/j.poly.2018.06.049. [DOI] [Google Scholar]
- 5.Chen Y., Guan R., Zhang C., Huang J., Ji L., Chao H. Two-photon luminescent metal complexes for bioimaging and cancer phototherapy. Coordination Chemistry Reviews. 2016;310:16–40. doi: 10.1016/j.ccr.2015.09.010. [DOI] [Google Scholar]
- 6.Gupta K. C., Sutar A. K. Catalytic activities of Schiff base transition metal complexes. Coordination Chemistry Reviews. 2008;252(12–14):1420–1450. doi: 10.1016/j.ccr.2007.09.005. [DOI] [Google Scholar]
- 7.Kim H., Lee Y. S. Quantum chemical analysis of salen-aluminum complexes for organic light emitting diodes. Chemical Physics Letters. 2013;585:143–148. doi: 10.1016/j.cplett.2013.08.104. [DOI] [Google Scholar]
- 8.Freire C., Nunes M., Pereira C., Fernandes D. M., Peixoto A. F., Rocha M. Metallo(salen) complexes as versatile building blocks for the fabrication of molecular materials and devices with tuned properties. Coordination Chemistry Reviews. 2019;394:104–134. doi: 10.1016/j.ccr.2019.05.014. [DOI] [Google Scholar]
- 9.Erxleben A. Transition metal salen complexes in bioinorganic and medicinal chemistry. Inorganica Chimica Acta. 2018;472:40–57. doi: 10.1016/j.ica.2017.06.060. [DOI] [Google Scholar]
- 10.Asadi Z., Nasrollahi N. The effect of metal and substituent on DNA binding, cleavage activity, and cytotoxicity of new synthesized Schiff base ligands and Zn(II) complex. Journal of Molecular Structure. 2017;1147:582–593. doi: 10.1016/j.molstruc.2017.06.137. [DOI] [Google Scholar]
- 11.Kaczmarek A. M., Porebski P. W. A., Mortier T., Lynen F., Van Deun R., Van Hecke K. Near-infrared luminescence and RNA cleavage ability of lanthanide Schiff base complexes derived from N,N′-bis(3-methoxysalicylidene)ethylene-1,2-diamine ligands. Journal of Inorganic Biochemistry. 2016;163:194–205. doi: 10.1016/j.jinorgbio.2016.07.017. [DOI] [PubMed] [Google Scholar]
- 12.Li P., Niu M., Hong M., Cheng S., Dou J. Effect of structure and composition of nickel(II) complexes with salicylidene Schiff base ligands on their DNA/protein interaction and cytotoxicity. Journal of Inorganic Biochemistry. 2014;137:101–108. doi: 10.1016/j.jinorgbio.2014.04.005. [DOI] [PubMed] [Google Scholar]
- 13.Gurumoorthy P., Mahendiran D., Prabhu D., Arulvasu C., Rahiman A. K. Mixed-ligand copper(II) phenolate complexes: synthesis, spectral characterization, phosphate-hydrolysis, antioxidant, DNA interaction and cytotoxic studies. Journal of Molecular Structure. 2015;1080:88–98. doi: 10.1016/j.molstruc.2014.09.070. [DOI] [Google Scholar]
- 14.Serra M. E. S., Murtinho D., da Rocha Z. N., et al. Dibrominated camphoric acid derived salen complexes: synthesis, characterization and cytotoxic activity. Polyhedron. 2017;137:147–156. doi: 10.1016/j.poly.2017.08.038. [DOI] [Google Scholar]
- 15.Bahaffi S. O., Abdel Aziz A. A., El-Naggar M. M. Synthesis, spectral characterization, DNA binding ability and antibacterial screening of copper(II) complexes of symmetrical NOON tetradentate Schiff bases bearing different bridges. Journal of Molecular Structure. 2012;1020:188–196. doi: 10.1016/j.molstruc.2012.04.017. [DOI] [Google Scholar]
- 16.Sadeek S. A., El-Attar M. S., Abd El-Hamid S. M. Preparation and characterization of new tetradentate Schiff base metal complexes and biological activity evaluation. Journal of Molecular Structure. 2013;1051:30–40. doi: 10.1016/j.molstruc.2013.07.053. [DOI] [Google Scholar]
- 17.Ahumada G., Fuentealba M., Roisnel T., et al. Novel Co(II), Ni(II) and Cu(II) complexes involving a 2-thienyl and trifluoromethyl containing symmetrically-substituted tetradentate Schiff-base ligand: syntheses, structures, electrochemical and computational studies. Polyhedron. 2018;151:279–286. doi: 10.1016/j.poly.2018.05.048. [DOI] [Google Scholar]
- 18.Ejidike I. P., Ajibade P. A. Synthesis, characterization, and in vitro antioxidant and anticancer studies of ruthenium(III) complexes of symmetric and asymmetric tetradentate Schiff bases. Journal of Coordination Chemistry. 2015;68(14):2552–2564. doi: 10.1080/00958972.2015.1043127. [DOI] [Google Scholar]
- 19.Cisterna J., Artigas V., Fuentealba M., et al. Nickel(II) and copper(II) complexes of new unsymmetrically-substituted tetradentate Schiff base ligands: spectral, structural, electrochemical and computational studies. Inorganica Chimica Acta. 2017;462:266–280. doi: 10.1016/j.ica.2017.04.001. [DOI] [Google Scholar]
- 20.Meng Q., Clegg J. K., Brock A. J., Jolliffe K. A., Lindoy L. F., Wei G. Mono- and dinucleating Ni(II), Cu(II), Zn(II) and Fe(III) complexes of symmetric and unsymmetric Schiff bases incorporating salicylimine functions-synthetic and structural studies. Polyhedron. 2014;74:113–121. doi: 10.1016/j.poly.2014.03.002. [DOI] [Google Scholar]
- 21.Liu X., Manzur C., Novoa N., Celedón S., Carrillo D., Hamon J.-R. Multidentate unsymmetrically-substituted Schiff bases and their metal complexes: synthesis, functional materials properties, and applications to catalysis. Coordination Chemistry Reviews. 2018;357:144–172. doi: 10.1016/j.ccr.2017.11.030. [DOI] [Google Scholar]
- 22.Pragathi M., Reddy K. H. Synthesis, spectral characterization and DNA interactions of copper(II) and nickel(II) complexes with unsymmetrical Schiff base ligands. Indian Journal of Chemistry. 2013;52(7):845–853. [Google Scholar]
- 23.Sundaravadivel E., Reddy G. R., Manoj D., Rajendran S., Kandaswamy M., Janakiraman M. DNA binding and cleavage studies of copper(II) complex containing N2O2 Schiff base ligand. Inorganica Chimica Acta. 2018;482:170–178. doi: 10.1016/j.ica.2018.06.002. [DOI] [Google Scholar]
- 24.Meghdadi S., Amirnasr M., Majedi M., et al. Template synthesis, and X-ray crystal structures of copper(II) and nickel(II) complexes of new unsymmetrical tetradentate Schiff base ligands. Electrochemistry, antibacterial properties, and metal ion effect on hydrolysis-recondensation of the ligand. Inorganica Chimica Acta. 2015;437(1):64–69. doi: 10.1016/j.ica.2015.08.006. [DOI] [Google Scholar]
- 25.Shukla S. N., Gaur P., Raidas M. L., Chaurasia B. Tailored synthesis of unsymmetrical tetradentate ONNO schiff base complexes of Fe(III), Co(II) and Ni(II): spectroscopic characterization, DFT optimization, oxygen-binding study, antibacterial and anticorrosion activity. Journal of Molecular Structure. 2020;1202 doi: 10.1016/j.molstruc.2019.127362.127362 [DOI] [Google Scholar]
- 26.Ejidike I. P., Ajibade P. A. Synthesis, characterization, antioxidant, and antibacterial studies of some metal(II) complexes of tetradentate schiff base ligand: (4E)-4-[(2-{(E)-[1-(2,4-Dihydroxyphenyl)ethylidene]amino}ethyl)imino]pentan-2-one. Bioinorganic Chemistry and Applications. 2015;2015:9. doi: 10.1155/2015/890734.890734 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 27.Ambroziak K., Szypa M. A synthesis of unsymmetrical chiral salen ligands derived from 2-hydroxynaphthaldehyde and substituted salicylaldehydes. Tetrahedron Letters. 2007;48(19):3331–3335. doi: 10.1016/j.tetlet.2007.03.082. [DOI] [Google Scholar]
- 28.Campbell E. J., Nguyen S. T. Unsymmetrical salen-type ligands: high yield synthesis of salen-type Schiff bases containing two different benzaldehyde moieties. Tetrahedron Letters. 2001;42(7):1221–1225. doi: 10.1016/s0040-4039(00)02226-7. [DOI] [Google Scholar]
- 29.Cisterna J., Dorcet V., Manzur C., Ledoux-Rak I., Hamon J.-R., Carrillo D. Synthesis, spectral, electrochemical, crystal structures and nonlinear optical properties of unsymmetrical Ni(II) and Cu(II) Schiff base complexes. Inorganica Chimica Acta. 2015;430:82–90. doi: 10.1016/j.ica.2015.02.030. [DOI] [Google Scholar]
- 30.Celedon S., Roisnel T., Carrillo D., Ledoux-Rak I., Hamon J.-R., Manzur C. Transition metal(II) complexes featuring push-pull dianionic Schiff base ligands: synthesis, crystal structure, electrochemical, and NLO studies. Journal of Coordination Chemistry. 2020;73(20–22):3079–3094. doi: 10.1080/00958972.2020.1827237. [DOI] [Google Scholar]
- 31.Singh V. P., Singh S., Singh D. P., Tiwari K., Mishra M. Synthesis, spectroscopic (electronic, IR, NMR and ESR) and theoretical studies of transition metal complexes with some unsymmetrical Schiff bases. Journal of Molecular Structure. 2014;1058:71–78. doi: 10.1016/j.molstruc.2013.10.046. [DOI] [Google Scholar]
- 32.Ramesh G., Daravath S., Swathi M., Sumalatha V., Shiva Shankar D., Shivaraj Investigation on Co(II), Ni(II), Cu(II) and Zn(II) complexes derived from quadridentate salen-type Schiff base: structural characterization, DNA interactions, antioxidant proficiency and biological evaluation. Chemical Data Collections. 2020;28 doi: 10.1016/j.cdc.2020.100434.100434 [DOI] [Google Scholar]
- 33.Gutierrez K., Corchado J., Lin S., Chen Z., Piñero Cruz D. M. A non-innocent salen naphthalene ligand and its Co2+, Ni2+, and Cu2+ metal complexes: structural, electrochemical, and spectroscopic characterization and computational studies. Inorganica Chimica Acta. 2018;474:118–127. doi: 10.1016/j.ica.2018.01.002. [DOI] [Google Scholar]
- 34.Raj M. V. N., Bhar K., Jain S., Rana M., Khan T. A., Sharma A. K. Syntheses, X-ray structures, electrochemical properties and biological evaluation of mono- and dinuclear N2O2-donor ligand-Fe systems. Transition Metal Chemistry. 2019;44(7):615–626. doi: 10.1007/s11243-019-00322-6. [DOI] [Google Scholar]
Associated Data
This section collects any data citations, data availability statements, or supplementary materials included in this article.
Supplementary Materials
This section contains the spectral data of synthetic unsymmetrical tetradentate Schiff base ligands, Cu(II) and Fe(III) complexes. The spectral data of synthetic unsymmetrical tetradentate Schiff base ligands consist of UPLC, Q-TOF-MS, IR, UV-Vis, 1H-NMR, and 13C-NMR spectra. The spectral data of the obtained Cu(II) and Fe(III) complexes include ESI-MS, IR, UV-Vis, and CV spectra.
Data Availability Statement
The data used to support the findings of this study are included within the article and the supplementary information file.