Skip to main content
Materials logoLink to Materials
. 2021 Jun 2;14(11):3012. doi: 10.3390/ma14113012

Correction: Ghanei et al. Effect of Nano-CuO on Engineering and Microstructure Properties of Fibre-Reinforced Mortars Incorporating Metakaolin: Experimental and Numerical Studies. Materials 2017, 10, 1215

Amir Ghanei 1, Faezeh Jafari 2, Mojdeh Mehrinejad Khotbehsara 3, Ehsan Mohseni 4, Waiching Tang 4,*, Hongzhi Cui 5
PMCID: PMC8199530  PMID: 34199686

The authors regret that Figures 6 and 11b in [1] were printed incorrectly. Therefore, the authors wish to make the following corrections to Figure 6 and Figure 11b. Since the analysis was conducted based on the following images, the correction does not affect the results and conclusions.

Figure 6.

Figure 6

SEM images of: (a) CO sample; and (b) MK30 sample.

Figure 11.

Figure 11

SEM images of: (a) PP; and (b) PP-MK10NC3.

Footnotes

Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Reference

  • 1.Ghanei A., Jafari F., Khotbehsara M.M., Mohseni E., Tang W., Cui H. Effect of Nano-CuO on Engineering and Microstructure Properties of Fibre-Reinforced Mortars Incorporating Metakaolin: Experimental and Numerical Studies. Materials. 2017;10:1215. doi: 10.3390/ma10101215. [DOI] [PMC free article] [PubMed] [Google Scholar]

Articles from Materials are provided here courtesy of Multidisciplinary Digital Publishing Institute (MDPI)

RESOURCES