Skip to main content
Scientific Reports logoLink to Scientific Reports
. 2022 Apr 6;12:5803. doi: 10.1038/s41598-022-09955-7

Author Correction: Customized 3D-printed stackable cell culture inserts tailored with bioactive membranes

Asli Aybike Dogan 1, Martin Dufva 1,
PMCID: PMC8986841  PMID: 35388119

Correction to: Scientific Reports 10.1038/s41598-022-07739-7, published online 07 March 2022

The original version of this Article contained an error in Figure 5 where the labels “PTFE” and “Gelatin” were interchanged. The original Figure 5 and accompanying legend appear below.

Figure 5.

Figure 5

Representative light microscopy images of mouse intestinal organoids in Matrigel dome on hydrophilic PTFE filters and Gelatin membrane. Images (n = 3) were taken during their culture for 7 days in the insert plate wells with a light microscope (scalebar 500 µm for 4 × magnification; scalebar: 200 µm for the 10 × magnification.

The original Article has been corrected.


Articles from Scientific Reports are provided here courtesy of Nature Publishing Group

RESOURCES